Database Info

[Q] Can't access root and Google apps

I recently rooted my phone (T-Mobile US Nexus S) and installed the 4.0.3 OTA update from this thread, but now I cannot access any Google apps or get root access on any of the apps that require it.

SounderBruce said:
I recently rooted my phone (T-Mobile US Nexus S) and installed the 4.0.3 OTA update from this thread, but now I cannot access any Google apps or get root access on any of the apps that require it.
Click to expand...
Click to collapse
Ok! first download : http://www.4shared.com/zip/XG506hyV/icsroot-fastboot-recovey.html
just unpack, connect your device and click run.bat.....Good luck!

I ran the .bat, but I get an error saying "Device already rooted", but it is still not recognized as rooted by SuperUser.
Alternatively, is it possible to completely wipe the phone of everything (including root) so I can start over with a fresh phone?

Of course you can, and might be the best idea if you don't mind doing it.
Make sure you have the latest CWM recovery on your phone, download the FULL ROM from this thread (i'm not american so i don't know exactly, but from what i know yours is the I9020T, so get that ROM) and copy it to the SDCard. Now go into recovery, wipe system/data and dalvik cache, then flash the ROM.
Do make sure you have the right ROM though. This will get you 100% fresh and untouched 4.0.3. You can probably clear out any non-personal folders on the sdcard too, but that shouldn't do any harm anyway.
After this, use the attached file from this thread to root, and feel free to update root/superuser.

Actually, that's what I did...I can't use CWM recovery because its displaying an error of no root. So how do I wipe this or fix CWM?

Is your boot loader unlocked? And are you trying to flash cwm through fastboot?
Note to backup your sdcard if unlocking the bootloader.

Harbb said:
Is your boot loader unlocked? And are you trying to flash cwm through fastboot?
Note to backup your sdcard if unlocking the bootloader.
Click to expand...
Click to collapse
My bootloader is apparently unlocked and I'm trying to flash through fastboot.

Are you sure the following is satisfied:
-open padlock and google logo on boot
-fastboot (on phone) says "bootloader status: unlocked" or something of the like
-you are using: "fastboot flash recovery "C:\path\to\recovery.img""
-you are using the above command while connected to the PC via USB (with working drivers) and that you are in fastboot mode on the phone (turn off phone --> hold Vol. Up then hold Power TOGETHER for about 2 seconds, should give you reboot and recovery options)
It is necessary to be in the bootloader/fastboot interface on the phone when you run the command. Hopefully it was something simple that i said above, otherwise i'm completely lost.

1. Yes
2. Yes
3. I didn't use that method to root...
4. I'll try that.

3 is just flashing recovery, that is the code u type into cmd/terminal to reflash the recovery img. It isn't rooting the phone. 4 is how to get into the mode on the phone to use the command.
Its a bit confusing at first but makes much more sense once you do it one or two times.

Where do I go to get the recovery image?

The latest ClockWorkMod Recovery can be found on this page. Just scroll down to Nexus S and download 5.0.2.0 crespo .img. Then just direct fastboot to the folder you have it saved in while using the "fastboot flash recovery C:\path\to\recovery.img" command.

Ok. I've tried this, but in command prompt, I get the following error:
C:\Users\Bruce>fastboot flash recovery C:\Users\Bruce\Downloads\recovery.img
'fastboot' is not recognized as an internal or external command,
operable program or batch file.

Check out this rooting guide, however only go up to step 5 (and do NOT type "fastboot oem unlock", do everything up until that point). This will setup fastboot for you, and setup drivers for your computer. Once this is done, do what you did above and it should work successfully.
Remember to cd (change directory) in cmd to where you unzipped that folder.

There isn't a link...

Sorry, stuffed that up. I fixed the link in my previous post pointing to NexusSHacks - How to Root Nexus S.

It's worked, but when I try to go to the recovery menu, the Google/unlocked padlock screen freezes or it displays an Android with its chest compartment open and a red triangular ! symbol.

I just had a really long reply and managed to lose it by closing the page..
That's the stock bootloader you see there, it probably didnt flash or you rebooted your phone. And make sure that you are flashing the latest CWM you downloaded before.

I flashed the latest CWM, but when I try to go to recovery, my phone freezes at the Google logo with the unlocked padlock.

Have you tried flashing it again, or maybe redownloading the file? And of course making sure it is the NEXUS S version which you are downloading.
Alternatively, try just "fastboot boot recovery.img", replacing recovery.img with the full name and path of cwm.
edit: btw, i'll be gone for an hour or two Bruce so i can answer any more questions/issues when i get back

TF300T 4.2 TWRP Error

Hi XDA,
I am a complete noob, and this is my first time posting, so bear with me.
Some time ago I rooted and unlocked my TF300 with SuperSu. Recently I wanted to upgrade to 4.4 kitkat. However, my Tablet was stuck at Andriod 4.1 because of the the unlock.
I went to manually update my TF via the Asus website. I installed the 10.6.1.8 using my TWRP 2.5, and Oem 4.1 OS. Installation worked just fine. After install, I booted up and I had 4.2 with everything working correctly.
Next step was to install TWRP 2.7.0.1. I reset my TF and went into RCK to see something went wrong when updating.
My TWRP will not load, and I get the Android on his back with the red triangle when I try to enter RCK.
Thanks in advance!!

I managed to install 10.6.1.27, but it did not change anything with my boot loader.
I downloaded motochopper, but that didn't seem to work, just told me my abt was out of date. SuperSu isn't working now either, "No Binary, There is a problem."
How do I install TWRP 2.7 with no boot loader? Please help.

TallMilk said:
I managed to install 10.6.1.27, but it did not change anything with my boot loader.
I downloaded motochopper, but that didn't seem to work, just told me my abt was out of date. SuperSu isn't working now either, "No Binary, There is a problem."
How do I install TWRP 2.7 with no boot loader? Please help.
Click to expand...
Click to collapse
Most people just install TWRP via fastboot like
Code:
fastboot -i 0x0B05 flash recovery twrp.blob
You could try using other root methods, like Framaroot or Kingo. I think Kingo was reported to work on the latest stock version.

cmendonc2 said:
Most people just install TWRP via fastboot like
Code:
fastboot -i 0x0B05 flash recovery twrp.blob
You could try using other root methods, like Framaroot or Kingo. I think Kingo was reported to work on the latest stock version.
Click to expand...
Click to collapse
I will look into that, but I am pretty sure I was already rooted, unless losing my boot loader means I am no longer rooted.
Another thing, I can't find a twrp.blob for 2.7, just a zip. I have one for 2.5, but that is useless because I already have 4.2. I also have not been able to find a working link to fastboot.
If anyone could give me a link to the fastboot or a link to a tutorial, that would be amazing. I have done my research, but all the lingo and different methods can be mind bending.
Thanks

TallMilk said:
I will look into that, but I am pretty sure I was already rooted, unless losing my boot loader means I am no longer rooted.
Another thing, I can't find a twrp.blob for 2.7, just a zip. I have one for 2.5, but that is useless because I already have 4.2. I also have not been able to find a working link to fastboot.
If anyone could give me a link to the fastboot or a link to a tutorial, that would be amazing. I have done my research, but all the lingo and different methods can be mind bending.
Thanks
Click to expand...
Click to collapse
You can get the img (which substitutes as a blob) from extracting it from the TWRP 2.7 zip file.
1) You will need ADB and fastboot for this: http://forum.xda-developers.com/showthread.php?p=42407269. I would suggest keeping the tablet at least at 50% battery.
2) Install Naked Drivers. This may be optional for you. If you can proceed to the next step without, you won't need it.
3) Enter fastboot by rebooting and holding down the power button. TF300 enters fastboot automatically since this is 4.2 BL.
4) Next we need to enter a command. In side the ADB folder, hold shift and right click. Then select Open command window here.
first check to make sure the device is connected:
Code:
fastboot devices
The device serial number should be listed.
enter command:
Code:
fastboot flash recovery twrp.img -i 0x0b05
Blue bar on device will fill. Be patient.
5) Reboot the Device back into Android. This is an important step.
6.) Go back into TWRP and install what you want.

You are amazing. I will give it a try tonight and report back!

cmendonc2 said:
You can get the img (which substitutes as a blob) from extracting it from the TWRP 2.7 zip file.
1) You will need ADB and fastboot for this: http://forum.xda-developers.com/showthread.php?p=42407269. I would suggest keeping the tablet at least at 50% battery.
2) Install Naked Drivers. This may be optional for you. If you can proceed to the next step without, you won't need it.
3) Enter fastboot by rebooting and holding down the power button. TF300 enters fastboot automatically since this is 4.2 BL.
4) Next we need to enter a command. In side the ADB folder, hold shift and right click. Then select Open command window here.
first check to make sure the device is connected:
Code:
fastboot devices
The device serial number should be listed.
enter command:
Code:
fastboot flash recovery twrp.img -i 0x0b05
Blue bar on device will fill. Be patient.
5) Reboot the Device back into Android. This is an important step.
6.) Go back into TWRP and install what you want.
Click to expand...
Click to collapse
Installed adb fastboot. However, my device does not automatically go into fastboot, I still have to hold down the volume key.
Once I am in fastboot usb (with the 3 icons), I fastboot successfully and get the serial number, then when I type the 'fastboot flash recovery twrp.img -i 0x0b05' command I get this error: cannot load 'twrp.img' : No error
I am attemping to use the 2.7.0.1 twrp from the 4.4.2 page. I have extracted the recovery.img (tried renaming to twrp and left it the same) and placed it in the root of both my external and internal sd.
I have now tried it with .zips .img .blob and I receive the same error everytime. Not sure what I am doing wrong now.

TallMilk said:
Installed adb fastboot. However, my device does not automatically go into fastboot, I still have to hold down the volume key.
Once I am in fastboot usb (with the 3 icons), I fastboot successfully and get the serial number, then when I type the 'fastboot flash recovery twrp.img -i 0x0b05' command I get this error: cannot load 'twrp.img' : No error
I am attemping to use the 2.7.0.1 twrp from the 4.4.2 page. I have extracted the recovery.img (tried renaming to twrp and left it the same) and placed it in the root of both my external and internal sd.
I have now tried it with .zips .img .blob and I receive the same error everytime. Not sure what I am doing wrong now.
Click to expand...
Click to collapse
Put the twrp.img into your ADB folder, where you installed it. Then run the next command.

cmendonc2 said:
Put the twrp.img into your ADB folder, where you installed it. Then run the next command.
Click to expand...
Click to collapse
Awesome! Worked like a charm. twrp 2.7.0.1 installed perfectly.
Then I tried to flash the cyanogenmod. Said it installed fine, but it just gets stuck on the loading screen...

I am trying to do exactly what TallMilk is doing...put Cyanogenmod on my tablet. It is my understanding that I have to unlock my bootloader though? Which I have tried doing a million different ways with the Asus Unlock tool which always gives me an error.
If I follow the instructions posted above I will be able to flash Cyanogenmod without unlocking my bootloader?

SilentSpartan said:
I am trying to do exactly what TallMilk is doing...put Cyanogenmod on my tablet. It is my understanding that I have to unlock my bootloader though? Which I have tried doing a million different ways with the Asus Unlock tool which always gives me an error.
If I follow the instructions posted above I will be able to flash Cyanogenmod without unlocking my bootloader?
Click to expand...
Click to collapse
Finally got it to work. I had to do a wipe first, read about old roms interfering with new installations.
SilentSpartan, I used SuperSU last year to root and unlock my tablet when it was still a 4.0 android to flash to 4.1. This recent update was from 2.5 TWRP on a rooted device running 4.2. When I installed 4.2, it blew away my TWRP, and I had to flash the new TWRP 2.7.0.1.
That flash from OEM fastboot to TWRP 2.7.0.1 is what I needed help with.

TallMilk said:
Finally got it to work. I had to do a wipe first, read about old roms interfering with new installations.
SilentSpartan, I used SuperSU last year to root and unlock my tablet when it was still a 4.0 android to flash to 4.1. This recent update was from 2.5 TWRP on a rooted device running 4.2. When I installed 4.2, it blew away my TWRP, and I had to flash the new TWRP 2.7.0.1.
That flash from OEM fastboot to TWRP 2.7.0.1 is what I needed help with.
Click to expand...
Click to collapse
Damn, so I'm screwed. Why does Asus have to such so much...? You can no longer unlock afaik.

SilentSpartan said:
I am trying to do exactly what TallMilk is doing...put Cyanogenmod on my tablet. It is my understanding that I have to unlock my bootloader though? Which I have tried doing a million different ways with the Asus Unlock tool which always gives me an error.
If I follow the instructions posted above I will be able to flash Cyanogenmod without unlocking my bootloader?
Click to expand...
Click to collapse
You're going to have to unlock no matter what. Did you try both v7 and v8 of the unlocker and calling Asus Support to tell them to put your serial number back into the database (get a manager)?

cmendonc2 said:
You're going to have to unlock no matter what. Did you try both v7 and v8 of the unlocker and calling Asus Support to tell them to put your serial number back into the database (get a manager)?
Click to expand...
Click to collapse
I've tried every firmware and unlock tool combination. Nothing works. I sent them an email a day ago. Depending on there response, maybe I'll try calling. I'm so fed up with this tablet, I'm about to throw it out my window. $400 POS. :good:

SilentSpartan said:
I've tried every firmware and unlock tool combination. Nothing works. I sent them an email a day ago. Depending on there response, maybe I'll try calling. I'm so fed up with this tablet, I'm about to throw it out my window. $400 POS. :good:
Click to expand...
Click to collapse
Did you ever get your tablet fixed? I am having some problems myself after a miserable m9 update.

Can't boot into recovery. any idea if this can be fixed?

I tried to root my Opo, but it started to go wrong after i flashed it. It went to reboot into TWRP, but all that happened was it crashed. the 1+ logo comes on and then the screen goes blank. This Happens all the time when I try a "fastboot oem unlock", factory reset, or a boot recovery.. the fastboot does work, but the device is also locked and i can't do a recovery due to this. I tried to do the root tutorial on youtube by C4ETech.. help please!

@nickizm, when you boot to fastboot and enter the command "fastboot devices", can you see your device listed on the screen?

Thanks for the reply.. The fastboot work fines apart from when I try to unlock the devices and it reboots into recovery, it crashes and doesn't unlock.. the rest of the phone works fine apart from the recovery... my bootloader is also locked and I can't unlock it due to crashing
(bootloader) Device tampered: true
(bootloader) Device unlocked: false
(bootloader) Charger screem enabled: false

I can't be certain but I'm pretty sure I read a similar issue to this a few days ago that was caused by not having the latest fastboot software, the user resolved it by downloading the latest android sdk and trying again.
Worth a shot.
Hope it helps.
Powered by Bacon

I had trouble when I first tried to root. Twrp wouldn't install. I ran some command which loaded it up but didn't install it on the phone, I was the able to root my phone.
Make sure you have latest oneplus one drivers. Have you tried using oneplus one toolkit to install recovery?
Sent from my Oneplus One using XDA Free mobile app.

I've tried to install a recovery, but my device is locked. If i do a "fastboot oem unlock" is just crashes on me when it going into recovery. I also get the same crash when I do a factory data reset or if I reboot into recovery. I think it's definitely something to do with the recovery, but since my device is locked i'm not sure what to do?... cheers again

nickizm said:
I've tried to install a recovery, but my device is locked. If i do a "fastboot oem unlock" is just crashes on me when it going into recovery. I also get the same crash when I do a factory data reset or if I reboot into recovery. I think it's definitely something to do with the recovery, but since my device is locked i'm not sure what to do?... cheers again
Click to expand...
Click to collapse
Did you try with the latest android sdk?
Powered by Bacon

I'm sure I did.. It wasn't that old.. I can try again, but the problem is I won't be able to unlock my phone??
is this the right link? http://developer.android.com/sdk/installing/index.html?pkg=studio

New drivers, exactly the same

Have you tried using a toolkit to do the unlock for you? People usually advise against using toolkits to do it for you as it prevents you gaining the experience of doing it yourself, but since it's not working when doing it yourself I don't see any harm in trying a toolkit.
You can find several options at the bottom of @timmaaa's resources roll-up thread here

Rkr87 said:
Have you tried using a toolkit to do the unlock for you? People usually advise against using toolkits to do it for you as it prevents you gaining the experience of doing it yourself, but since it's not working when doing it yourself I don't see any harm in trying a toolkit.
You can find several options at the bottom of @timmaaa's resources roll-up thread here
Click to expand...
Click to collapse
Yea i have also tried the tool kit V2
My problem is that the recovery is damaged in some way and my device is locked. i can't "fastboot oem unlock" as it just crashes when it goes to reboot.. is there a way to unlock my device with another method or can the recovery be repaired some how? i'm such noob

patstar5 said:
I had trouble when I first tried to root. Twrp wouldn't install. I ran some command which loaded it up but didn't install it on the phone, I was the able to root my phone.
Make sure you have latest oneplus one drivers. Have you tried using oneplus one toolkit to install recovery?
Sent from my Oneplus One using XDA Free mobile app.
Click to expand...
Click to collapse
Ye i tried that as well.. can't unlock the device as it just crashes when it goes to reboot into recovery

I think you might be out of luck, unless someone here more knowledgeable than I can help.
If you have a recovery image (not zip) you can try running the following command (make sure the img file is in the same directory as your adb/fastboot files and rename it "recovery");
Code:
fastboot boot recovery.img
What this allows you to do is boot into the TWRP recovery without having it installed on your phone, but I think I read somewhere that this command no longer works.
EDIT: If the above command will let you boot into TWRP, you'll want to read the guide here and flash the script.

Rkr87 said:
I think you might be out of luck, unless someone here more knowledgeable than I can help.
If you have a recovery image (not zip) you can try running the following command (make sure the img file is in the same directory as your adb/fastboot files and rename it "recovery");
Code:
fastboot boot recovery.img
What this allows you to do is boot into the TWRP recovery without having it installed on your phone, but I think I read somewhere that this command no longer works.
EDIT: If the above command will let you boot into TWRP, you'll want to read the guide here and flash the script.
Click to expand...
Click to collapse
I've tried that as well, but as my device is locked it won't allow it.. I'm stuck in limbo for now unless there is a way to unlock my device or repair the recovery? thanks for trying anyways

nickizm said:
I've tried that as well, but as my device is locked it won't allow it.. I'm stuck in limbo for now unless there is a way to unlock my device or repair the recovery? thanks for trying anyways
Click to expand...
Click to collapse
One last effort, after a bit of reading I've seen a few people with your issue have resolved it by flashing ColorOS (Chinese Stock ROM) and then going back to a custom rom once everything is fixed.
You can find a guide on how to do this here

Rkr87 said:
One last effort, after a bit of reading I've seen a few people with your issue have resolved it by flashing ColorOS (Chinese Stock ROM) and then going back to a custom rom once everything is fixed.
You can find a guide on how to do this here
Click to expand...
Click to collapse
Cheers mate! I just had a quick flick through it and it looks promising? the only problem seems to be with drivers in windows 7 which i am also using.. I'll see if I can do it via linux or i'll have to install xp on my old laptop or something.. I'll save this for tomorrow tho as it's late and will let you know how I get on with it. thanks for the help

nickizm said:
Cheers mate! I just had a quick flick through it and it looks promising? the only problem seems to be with drivers in windows 7 which i am also using.. I'll see if I can do it via linux or i'll have to install xp on my old laptop or something.. I'll save this for tomorrow tho as it's late and will let you know how I get on with it. thanks for the help
Click to expand...
Click to collapse
No worries! Let me know how it goes good luck!

Rkr87 said:
No worries! Let me know how it goes good luck!
Click to expand...
Click to collapse
Definitely! cheers again

nickizm said:
I tried to root my Opo, but it started to go wrong after i flashed it. It went to reboot into TWRP, but all that happened was it crashed. the 1+ logo comes on and then the screen goes blank. This Happens all the time when I try a "fastboot oem unlock", factory reset, or a boot recovery.. the fastboot does work, but the device is also locked and i can't do a recovery due to this. I tried to do the root tutorial on youtube by C4ETech.. help please!
Click to expand...
Click to collapse
can you give a little detail about
"device is also locked and i can't do a recovery due to this"
you did fastboot oem unlock. so saved data is wiped. but you should be able to boot into android system,
if so, enable "developer options" by clicking "settings" --> "about phone" --> "Build Number" click it 7 times,
then go into settings developer options and enable USB debugging.
then, use not fastboot, but adb to boot into recovery.
adb reboot recovery
Click to expand...
Click to collapse
there you can got into recovery.

Gh05tShie1d said:
can you give a little detail about
"device is also locked and i can't do a recovery due to this"
you did fastboot oem unlock. so saved data is wiped. but you should be able to boot into android system,
if so, enable "developer options" by clicking "settings" --> "about phone" --> "Build Number" click it 7 times,
then go into settings developer options and enable USB debugging.
then, use not fastboot, but adb to boot into recovery.
there you can got into recovery.
Click to expand...
Click to collapse
That doesn't work as my device crashes when it goes into recovery..
eg: "fastboot oem unlock", factory reset, or a boot recovery all crash as my recovery isn't working. When my device goes to reboot in recovery the 1+ logo comes up, fades out to like a blueish from the white 1+ logo and crashes.. so basically it's looked and I can't get into recovery.. thanks for trying

Bootloader Flash from TWRP (anything flash?)?

I was trying to install a ROM and things got a bit messed up. I wiped system/cache/dalvik/data via TWRP. I then went to install the ROM but it failed due to only supporting hhz12h bootloader.
So now I'm kind of stuck. I can't update the bootloader because fastboot/ADB won't list the device in TWRP. Is there any way to launch an ADB server in TWRP so I can fastboot the bootloader? Doesn't look like there is.
If there's not:
Is there a TWRP zip-install hhz12h bootloader I can use? Looked around, couldn't find one.
If not I'll have to try and find/flash the original image..but fastboot is not going to happen so I have to find a zip installable one that'll work with hhz12d bootloader...which hopefully is around. Otherwise I could install literally anything just to get an ADB server so I can fastboot the hhz12h bootloader in there. Stupid problem to have right here, lol.
Any thoughts/help is appreciated. TIA.

Okay, so I got around the issue. I'm not sure if TWRP is supposed to be able to fastboot or ADB but mine would not, I was under the impression that I could fastboot or ADB in recovery. Maybe that was just a mistake on my part thinking that.
My workaround:
- Reboot into the bootloader (not TWRP recovery), 3 finger reset, power off, then power button + vol up + vol down until you get the OEM Android bootloader screen (unplug if plugged in, it didn't seem to want to go into bootloader when it was plugged in - maybe I just didn't wait long enough, but unplug if it doesn't want to go into the bootloader).
- From here I was able to fastboot, "fastboot devices" listed it
- I then flashed the bootloader: "fastboot flash bootloader bootloader-hammerhead-hhz12h.img" (may differ if you wan to flash different bootloader)
- I then rebooted into bootloader: "fastboot reboot-bootloader"
- I then flashed recovery: "fastboot flash recovery openrecovery-twrp-2.8.5.2-hammerhead.img" (may differ for different version of recovery)
- I then used vol up/vol down to select "reboot recovery", and hit the power button
- TWRP booted and from there, now that I have the hhz12h.img bootloader flashed I could install the ROM, so I wiped data/dalvik/cache/system again, installed the ROM, installed Gapps, and rebooted, good to go.

FYI ADB works into recovery mode (TWRP) and Android. Fastboot can only be used when you are in the bootloader.
You did the right thing except that it wasn't necessary to flash TWRP. Flashing a bootloader.img only erases the boot partition so the recovery isn't concerned.

Primokorn said:
FYI ADB works into recovery mode (TWRP) and Android. Fastboot can only be used when you are in the bootloader.
You did the right thing except that it wasn't necessary to flash TWRP. Flashing a bootloader.img only erases the boot partition so the recovery isn't concerned.
Click to expand...
Click to collapse
Got it. For whatever reason I could not get ADB to see the device while I was in TWRP. I tried the ADB sideload feature in 'advanced' but it just waited and waited and waited forever. I believe ADB is set up properly on my system because it works fine on ROM. Not sure what the deal is with that, but I don't have much reason to go into ADB in recovery anyway aside from this issue, so it's [hopefully] not a big deal.
As for flashing the recovery, yeah, bad habit I guess. On my old phone (Fascinate Galaxy S 1), if you had custom recovery and had to 3-finger reset to bootloader because your phone wouldn't turn on or was bootlooping or whatever the recovery was boned, had to re-odin flash it. So it's stuck in my memory now that if I had to 3 finger it I better flash recovery. I'll try to knock myself out of that habit .
Thanks!

Syndacate said:
Is there a TWRP zip-install hhz12h bootloader I can use?
Click to expand...
Click to collapse
This one works.
http://forum.xda-developers.com/showpost.php?p=60879785&postcount=1246
EDIT - Looks like the poster took it down. I'll upload and get back to you.
EDIT part deux - http://d-h.st/zEex (includes the last modem)

Also that's a really old version of twrp you flashed...
Sent from my Nexus 5 using Tapatalk

Wakamatsu said:
This one works.
http://forum.xda-developers.com/showpost.php?p=60879785&postcount=1246
EDIT - Looks like the poster took it down. I'll upload and get back to you.
EDIT part deux - http://d-h.st/zEex (includes the last modem)
Click to expand...
Click to collapse
Thanks, I'll snag that just in case I ever have a fastboot outage or I'm on a system w/o ADB/fastboot or something.
ldubs said:
Also that's a really old version of twrp you flashed...
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Haha, I didn't even look at the dates, I just went to the "Tools/Utilities" page for the Nexus 5 and it was the top link....I didn't think too much on it, just figured top link = most recent = latest.
http://forum.xda-developers.com/showthread.php?t=2511507
I'll dig around for a thread which has latest and flash that on there, can't expect old versions to work flawlessly, now can we?
EDIT:
That actually might have just been a copy/paste error on my part, as I had the old TWRP lying around for fastboot and copy/pasted the name from that. I used TWRP (ROOT) app to install and I chose latest (or so I thought). Now I have literally NO idea which one I was using -_-.

No worries glad you got it sorted. You can flash an image file in twrp now BTW.
Sent from my Nexus 5 using Tapatalk

[GUIDE] Rooting the UMIDIGI S5 Pro | Magisk

EDIT: I attached a zip with AIDA64's reports for this phone. One report has Magisk hidden from AIDA64, the other doesn't.
This mostly a copy of _cab13_'s Rooting the UMI F2 post as the same instructions for rooting that phone are how I rooted the S5 Pro. So please give _cab13_ thanks here if this helped you root your phone. I'll take a thanks for removing the orange state warning if I helped you with that
Please be patient when posting questions, I will get back to you as quickly as I can. I just have many responsibilities which take up a great deal of my time.
Rooting the S5 Pro
Disclaimers
This is important, please read thoughtfully.
whatever you do, NEVER EVER use SP Flash Tool in "Format All+Download" mode. This will wipe your IMEI['s]s and some other bad stuff will happen like loss of fingerprint sensor. This cannot be reversed by us.
Once bootloader is unlocked, warranty is considered void. By following this guide, you consent to that happening. Safety net CTS will not pass anymore unless you flash Magisk which hides the unlocked bootloader.
Never re-lock your bootloader while running anything unofficial as the phone will not boot until you unlock again.
And, once again, a lot of bad things can happen like boot loops, if that happens to you, don't freak out! Simply re-flash the stock ROM, redoing the rooting process from the start. It might be time consuming, but that's your safest bet!
More important even, have fun rooting, it's before all a hobby!
Various Resources
>>> Latest official stock ROM <<<
[Non European] UMIDIGI_S5Pro_20210107.V3.04
[European] UMIDIGI_S5Pro.E_20201130.V3.04
Minimal ADB and Fastboot by shimp208
> Magisk (and Manager) by topjohnwu <
Mediatek SP Flash Tool
UMIDIGI Community Forum S5 Pro Thread
Unlocking Bootloader
ATTENTION!! After unlocking the bootloader, all user data in the phone's memory will be lost, so do not forget to throw all the most important things on your computer or flash drive!
1) Activate "Developer options" through Settings > About Phone > Tap Build Number multiple times.
2) Open "Developer options" in Settings > System > Tap Advanced.
Enable "OEM Unlocking" and enter your password to confirm. Enable "USB Debugging" as well.
3) On Windows, download and install Minimal ADB and Fastboot by shimp208
On Linux, use your package manager to install android-tools-adb and android-tools-fastboot
4) Open command prompt (Win + R > type cmd) or a terminal on linux.
5) Plug your phone, accept the prompt about adb and the PC signature.
6) Type adb reboot bootloader to reboot in fastboot mode. Unplug your cable from your phone
and replug it after fastboot is printed at the bottom of the screen.
THESE NEXT TWO STEPS WILL COMPLETELY WIPE YOUR DATA
7) Unlock the bootloader using fastboot flashing unlock and pressing Vol+
8) Unlock the secure partitions using fastboot flashing unlock_critical and pressing Vol+
9) Restart using fastboot reboot
You will now always see "Orange State" at boot; this is completely fine and will only delay your boot by 5 seconds.
Rooting using Magisk patched boot.img
This is "experimental" and is probably overkill, but everyone managed to install Magisk with it.
1) Clean install UMIDIGI_S5Pro_20200702.V3.02 (or the European one) with SPFT by selecting the scatter file, pressing download an rebooting the phone
(Make sure it is in "Download Mode" and not "Format + Download")
2) Patch boot.img by copying it to your device, using Magisk Manager to patch it, and get back the magisk_patched.img in the Download folder back to your PC.
3) Start ADB while booted; run adb reboot bootloader. Alternative is to reboot to recovery and selecting "reboot to bootloader"
4) unlock if not already done with fastboot flashing unlock followed by fastboot flashing unlock_critical
5) In the following code, the vbmeta.img and the recovery.img are the stock files from the ROM you downloaded and extracted.
Code:
fastboot erase boot
fastboot --disable-verity --disable-verification flash boot magisk_patched.img
fastboot --disable-verity --disable-verification flash recovery recovery.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot reboot
When rebooting, install Magisk Manager. It will prompt to finalize the installation, you can do so.
Congratulations ! You are now a proud Magisk user ! All credits goes to @topjohnwu he's the real MVP here.
Returning to stock / Resolving issues
The best way to resolve any issue is to return to stock. Here is the method.
1) Download latest stock ROM on UMIDIGI's forums
2) Download SP Flash Tool if you don't have it yet (Windows only)
3) Extract stock ROM in SP Flash Tool directory. Refer to Flash Tool guide if needed.
4) Open SP Flash Tool, Download Tab, "Choose" in Scatter-loading file, select the scatter file in the stock ROM directory.
5) If you want to keep your data, untick "userdata" partition. MAKE SURE FORMAT IS NOT SELECTED!
6) Press Download and connect your device via USB. Reboot the phone or turn it off and everything will be flashed.
7) If you want a full stock experience, I recommend relocking the bootloader so that SafetyNet will pass. Get into fastboot mode by using adb reboot bootloader and use fastboot flashing lock_critical followed by fastboot flashing lock. This will wipe your data once more.
You should be good to go.
ONE LAST THING
Get rid of your orange state warning.
Download the attached zip file and extract.
Put your phone into fastboot and:
Code:
fastboot erase lk
fastboot erase lk2
fastboot flash lk lk_patched.img
fastboot flash lk2 lk_patched.img
fastboot reboot
No more orange state warning! Reflash the stock lk before unrooting, though.
ATTACHED LK FILE IS FOR UMIDIGI S5 Pro ONLY.

Thank you for re-posting this as an option to root the S5. I did get stuck on flashing the recovery. I have tried a few times and every time it just flashes orange , restarts and loads normally. I have verified root.
i have used the recovery found here
https://forum.xda-developers.com/android/general/guide-rooting-umidigi-s5-pro-magisk-t4151183
I have no success installing TWRP. Do you know if twrp has a recovery that will work?

Hey guys it's me again !
Got some good news : I bought a S5 Pro as well
And I ABSOLUTELY LOVE IT !
I might get into rooting it soon, idk.
Thanks for the shout-out @zerosava

hermeez said:
Thank you for re-posting this as an option to root the S5. I did get stuck on flashing the recovery. I have tried a few times and every time it just flashes orange , restarts and loads normally. I have verified root.
i have used the recovery found here
https://forum.xda-developers.com/android/general/guide-rooting-umidigi-s5-pro-magisk-t4151183
I have no success installing TWRP. Do you know if twrp has a recovery that will work?
Click to expand...
Click to collapse
No luck for me finding a custom recovery (twrp or anything else.)
If you have any exp with them, see if you can make the F2's (found in the F2 root thread) work. It SHOULD only need a minumum of tweaking, just to account for the (afaik) slight soc differences. i'm not gonna hold my breath. there seems to be a void when it comes to enthusiasm for this phone. by my serial no, i have the 4832nd phone manufactured. compared to serials ranging from 22000- 189000 for my other umis (f1play, s3pro, f2, power3)

I think I'll try making TWRP soon for it.
The F2 TWRP would not be usable this easily, it's easier to start fresh.
If anyone wants to try, download the sources for the F2 TWRP on my GitHub, then you need to extract the stock kernel and replace the F2's with the S5pro's

root working thanx

Hi guys ,i lost the imei on my phone and have the" Googlekeystate:fail", how can i fix them, thanks for you help.

QUICKLARA said:
Hi guys ,i lost the imei on my phone and have the" Googlekeystate:fail", how can i fix them, thanks for you help.
Click to expand...
Click to collapse
Sorry, but I made this clear in the original post:
Disclaimers
This is important, please read thoughtfully.
whatever you do, NEVER EVER use SP Flash Tool in "Format All+Download" mode. This will wipe your IMEIs and some other bad stuff will happen like loss of fingerprint sensor. This cannot be reversed by us.
I do not know how to help you. My only suggestion is to post your problem in UMIDIGI's forum here: UMIDIGI Forum
If anyone can help you, that's where to find them.

Please I need your help I reset it wrong with SP Flash Tool and now I get Googlekeystate: fail and it doesn't grab my fingerprint I'm desperate I need a solution please

Ruiz702 said:
Please I need your help I reset it wrong with SP Flash Tool and now I get Googlekeystate: fail and it doesn't grab my fingerprint I'm desperate I need a solution please
Click to expand...
Click to collapse
I am sorry, but you will have to contact UMIDIGI support. Only they can help you as far as I know. I feel for you, I really do. I did this when I was a newbie with my F1 Play.

QUICKLARA said:
Hi guys ,i lost the imei on my phone and have the" Googlekeystate:fail", how can i fix them, thanks for you help.
Click to expand...
Click to collapse
hello, good and bad news.. fix but fingerprints are lost for good
https://community.umidigi.com/forum.php?mod=viewthread&tid=19722&extra=&page=1

Ruiz702 said:
Please I need your help I reset it wrong with SP Flash Tool and now I get Googlekeystate: fail and it doesn't grab my fingerprint I'm desperate I need a solution please
Click to expand...
Click to collapse
hello, good and bad news.. fix but fingerprints are lost for good
https://community.umidigi.com/forum.php?mod=viewthread&tid=19722&extra=&page=1

i followed the instructions but i got stuck after step 4 it would be nice if this had a video walkthrough thanks for the guide though =w= 10/10 would try to root again lol

hello folks,
This message is not about rooting s5 but rather about downgrading. I posted on the umidigi forum but have not received an answer. So the problem is the new OTA update that they pushed out yesterday. After update I lost 4G connectivity and i am unable to restore it. I want to roll back to the previous update. They have the roms available on the forum and I downloaded one but what I am not sure is can I use SP flash tool to just download the older ROM version on top of the new one?
I see lots of manuals on how to update but how do I safely downgrade?
Any help is greatly appreciated.
Sticks

stick2020 said:
hello folks,
This message is not about rooting s5 but rather about downgrading. I posted on the umidigi forum but have not received an answer. So the problem is the new OTA update that they pushed out yesterday. After update I lost 4G connectivity and i am unable to restore it. I want to roll back to the previous update. They have the roms available on the forum and I downloaded one but what I am not sure is can I use SP flash tool to just download the older ROM version on top of the new one?
I see lots of manuals on how to update but how do I safely downgrade?
Any help is greatly appreciated.
Sticks
Click to expand...
Click to collapse
Do a "download only" flash of the "super", " vbmeta_system", and "vbmeta_vendor" partitions only (uncheck all other partitions) from the previous ROM. That should do it.

ZeNNoP said:
i followed the instructions but i got stuck after step 4 it would be nice if this had a video walkthrough thanks for the guide though =w= 10/10 would try to root again lol
Click to expand...
Click to collapse
What precisely stuck you?

There is a new update firmware please make a rooting tutorial on youtube.,

Somebody made a custom TWRP and posted it on here. So if that'll help anyone out and get them to make a tutorial video, that be great. 'Cause I'm reading this over and over again, and I think I can do it, but I'm being very hesitant about it. And it's getting me all frustrated. I had it on "Flash Mode". And when I continued typing it out, it didn't go through and that had me on a raging panic attack. Luckily, it didn't mess up. But now I'm more hesitant. Please make a quick tutorial, doesn't even have to be perfect...
TWRP is at the bottom of this page:
[MT6785]How To Root Umidigi S5 Pro And Install TWRP 3.4.0 Recovery ~ Techswizz
To Root Umidigi S5 Pro, we will be using the Adb Tool Mode with TWRP recovery for Umidigi S5 Pro. It will be wise to read the post very well before flashing the recovery to avoid any Device errors or brick.
www.techswizz.com

Thanks for this guide. I am completely lost with step 7 and 8. What does the Unlock the bootloader using fastboot flashing unlock and pressing Vol+ mean?????? Where do you enter the unlock code and what is it?

bmaz121 said:
Thanks for this guide. I am completely lost with step 7 and 8. What does the Unlock the bootloader using fastboot flashing unlock and pressing Vol+ mean?????? Where do you enter the unlock code and what is it?
Click to expand...
Click to collapse
I am able to get FastBoot Mode on my screen (through step 6). I plug the phone back in per directions & I hear the Windows device connected chime.
I type: fastboot flashing unlock in the same cmd window
and I get "<waiting for any device>" in the cmd window and it hangs.
Every few seconds I hear the Windows device disconnected noise, but no device connect chime. This lasts indefinitely.
I repeated step 7 several times with variations with the Vol+ button: pressing first, holding down while pressing enter in cmd window, pushing afterward, holding down afterward, etc. Same results as described above.
Any help available? Should I not unplug my phone from the PC? The F2 directions did not require that.
thanks!