Database Info

[Q] Can't access root and Google apps

I recently rooted my phone (T-Mobile US Nexus S) and installed the 4.0.3 OTA update from this thread, but now I cannot access any Google apps or get root access on any of the apps that require it.

SounderBruce said:
I recently rooted my phone (T-Mobile US Nexus S) and installed the 4.0.3 OTA update from this thread, but now I cannot access any Google apps or get root access on any of the apps that require it.
Click to expand...
Click to collapse
Ok! first download : http://www.4shared.com/zip/XG506hyV/icsroot-fastboot-recovey.html
just unpack, connect your device and click run.bat.....Good luck!

I ran the .bat, but I get an error saying "Device already rooted", but it is still not recognized as rooted by SuperUser.
Alternatively, is it possible to completely wipe the phone of everything (including root) so I can start over with a fresh phone?

Of course you can, and might be the best idea if you don't mind doing it.
Make sure you have the latest CWM recovery on your phone, download the FULL ROM from this thread (i'm not american so i don't know exactly, but from what i know yours is the I9020T, so get that ROM) and copy it to the SDCard. Now go into recovery, wipe system/data and dalvik cache, then flash the ROM.
Do make sure you have the right ROM though. This will get you 100% fresh and untouched 4.0.3. You can probably clear out any non-personal folders on the sdcard too, but that shouldn't do any harm anyway.
After this, use the attached file from this thread to root, and feel free to update root/superuser.

Actually, that's what I did...I can't use CWM recovery because its displaying an error of no root. So how do I wipe this or fix CWM?

Is your boot loader unlocked? And are you trying to flash cwm through fastboot?
Note to backup your sdcard if unlocking the bootloader.

Harbb said:
Is your boot loader unlocked? And are you trying to flash cwm through fastboot?
Note to backup your sdcard if unlocking the bootloader.
Click to expand...
Click to collapse
My bootloader is apparently unlocked and I'm trying to flash through fastboot.

Are you sure the following is satisfied:
-open padlock and google logo on boot
-fastboot (on phone) says "bootloader status: unlocked" or something of the like
-you are using: "fastboot flash recovery "C:\path\to\recovery.img""
-you are using the above command while connected to the PC via USB (with working drivers) and that you are in fastboot mode on the phone (turn off phone --> hold Vol. Up then hold Power TOGETHER for about 2 seconds, should give you reboot and recovery options)
It is necessary to be in the bootloader/fastboot interface on the phone when you run the command. Hopefully it was something simple that i said above, otherwise i'm completely lost.

1. Yes
2. Yes
3. I didn't use that method to root...
4. I'll try that.

3 is just flashing recovery, that is the code u type into cmd/terminal to reflash the recovery img. It isn't rooting the phone. 4 is how to get into the mode on the phone to use the command.
Its a bit confusing at first but makes much more sense once you do it one or two times.

Where do I go to get the recovery image?

The latest ClockWorkMod Recovery can be found on this page. Just scroll down to Nexus S and download 5.0.2.0 crespo .img. Then just direct fastboot to the folder you have it saved in while using the "fastboot flash recovery C:\path\to\recovery.img" command.

Ok. I've tried this, but in command prompt, I get the following error:
C:\Users\Bruce>fastboot flash recovery C:\Users\Bruce\Downloads\recovery.img
'fastboot' is not recognized as an internal or external command,
operable program or batch file.

Check out this rooting guide, however only go up to step 5 (and do NOT type "fastboot oem unlock", do everything up until that point). This will setup fastboot for you, and setup drivers for your computer. Once this is done, do what you did above and it should work successfully.
Remember to cd (change directory) in cmd to where you unzipped that folder.

There isn't a link...

Sorry, stuffed that up. I fixed the link in my previous post pointing to NexusSHacks - How to Root Nexus S.

It's worked, but when I try to go to the recovery menu, the Google/unlocked padlock screen freezes or it displays an Android with its chest compartment open and a red triangular ! symbol.

I just had a really long reply and managed to lose it by closing the page..
That's the stock bootloader you see there, it probably didnt flash or you rebooted your phone. And make sure that you are flashing the latest CWM you downloaded before.

I flashed the latest CWM, but when I try to go to recovery, my phone freezes at the Google logo with the unlocked padlock.

Have you tried flashing it again, or maybe redownloading the file? And of course making sure it is the NEXUS S version which you are downloading.
Alternatively, try just "fastboot boot recovery.img", replacing recovery.img with the full name and path of cwm.
edit: btw, i'll be gone for an hour or two Bruce so i can answer any more questions/issues when i get back

Unbrickable tf300t

Hello everyone. I am new around here and totally new with android devices. I got my tf300t, installed twrp and flashed to the newest android version. Then my dad suddendly pressed something like restore to the manufactory setting and after that it rebooted and just keep booting with teamwin logo. I can not access twrp recovery mod, it is just in boot loop. I managed to get adb to work, but no fastboot since it does not boot into recovery mode. When I am in adb I can browse the device but the adb reboot bootloader does not work at all. It just hangs there. I can not power off the device because it does not let me, I can not boot into recovery mode with powerbutton and volume down button. After a long power button press it only reboots. I even tried with hard reset button but still the same. Could You please help me somehow? I really need that device for school and I would like to get back into the stock android. Thank you so much for any help.
//edit : I also forget to mention, when I execute adb deviced it shows:
List of devices attached
0123456789ABCDEF recovery
Also the device is unlocked.

Did you tried: adb reboot recovery ?
Did you tried to flash recovery again?
Be sure to use the right recovery for your bootloader. Did you upgraded bootloader to latest ASUS one? One then you're able to flash current recoveries like TWRP like 2.8.5.0 oder 2.8.7.0.
Edit: Also take a look here -> http://droidmodderx.com/prime/?page_id=74

Hello sir. Thank you for answering. I tried adb reboot recovery and it just hangs to be executed... But the tablet is still flashing the teamwin logo. I have the same bootloop as the guy on youtube called Francis Domingo and video called Samsung s5 stuck at TWRP Recovery boot loop (unfortunately I can not add link here).
//edit: Thank you for the link. It look like I have to use option 1a. Is it safe to use that command and I will not make it even more bricked? Thank you so much
//edit2: Now I just realized how to turn off the device to stop from rebooting. I just long pressed power button and up volume button and after the screen went black I kept holding the up volume button. I didn't work with down volume button or if I stopped holding the up volume button after black screen it rebooted again.
//edit3 : Let's say if I get to the twrp mode with option 1a from the link, what do I have to do next to get back to the stock rom (I think it was something like 4.0.3) ? Thank you

What the guy does in 1a is wiping mmcblk0p3.
Afaik mmcblk0p3 is the staging partition. That would be my guess anyway if you had access to fastboot. Usally when you can't boot into recovery, something is wrong in staging. I got the same problem 2 days ago. In this case you usually wipe staging partition via fastboot.
Since you got no fastboot access, you have to try with adb.
After cleaning the staging partition you can flash any recovery you want back again.
The recovery must be flashed to mmcblk0p4 <- 4!!! is the recovery partition. (but you should wipe mmcblk0p3 (3!!!) before)
So I would say, try what solution 1a suggests.
Edit: You can go back to stock android if you want, but there is no reason for this. My advice would be to unlock and root your device, upgrade to latest boot loader (which is done by upgrading to latest stock rom), then flash TWRP 2.8.5.0 and then a useful ROM on top. I'm using the one from timduru which is very nice. You can find it here: http://forum.xda-developers.com/transformer-tf300t/development/rom-t2932783

Thank you for the answer. Could you please write a step by step to get out of brick and to get the stock version, because the newer one I installed was many times slower. The reason why I would like to have step by step is because I don't wanna mess it even more than it is. Thank you so much.
//the stock rom was much more faster than the one I have installed, I mean... the boot time wad unbelievable slow, same with responses and wifi problem. If there is any other faster rom than stock I would be happy but I don't wanna mess with any bugs or slow boot speed and I can not wait minutes until it boots.

Hm, try the Option 1a from the link.
If done, boot into current recovery. Tell me which version and which recovery do you have.
Top on this we can decide what to do to flash a good ROM.

I had the exact same thing happen to me yesterday. Option #1 worked for me.
I did the steps from option #1 and powered down using the volume up + power. I then tried to boot into TWRP recovery, which only reproduced the same issue.
I redid the option #1 steps, and this time powered down using the power + volume down. I powered back up normally, and it rebooted normally into the ROM.
The tablet now works normally, and I can also boot back into TWRP recovery with no issues.
Thanks for the thread and the link.

Thank you so much Catscratch! After I executed both command from option 1a I can get into the screen, where it shows three options: RCK, Android, Wipe Data
In the top left corner, there is written:
Key driver not found.. Booting OS
Android cardhu-user bootloader <1.00 e> released by "WW_epad-10.6.1.27.5-20130902" A03
Starting Fastboot USB download protocol
The tablet can boot into the last ROM but as I said, I would like to have the faster and less buggy rom than this. When I open the settings and click about button there is written: CyanongenMod: 12.1-20150814-NIGHTLY-tf300t and Android version 5.1.1.
If I start RCK it just brings me back to the loop, but now I have fastboot available as it said above and I can list the fastboot devices on computer, which I couldn't before. Should I just execute this command from the computer "fastboot -i 0x0B05 flash system blob" and then "fastboot reboot" or should I download ROM from asus.com/Tablets/ASUS_Transformer_Pad_TF300T/HelpDesk_Download/ -> OS Android -> Firmware and now I don't know which should I choose: If JP or CN or WW or US or TW (Probably US right?). After that should I execute "fastboot -i 0x0B05 flash recovery firmware.img" and then "fastboot reboot" ? Or which ROM should I download to make it even faster and less buggy than stock ROM? Thank you so much again, You saved my tablet
//After I unzipped downloaded US ROM there is no img file. If I remember right the img file is only recovery to reflash the actual one and then when I start the twrp recovery I will select zip file with rom right?

OK, first of all to continue...I assume you got root access. (I think you should have, because you already got CM installed)
Next. Downloads.
Download: https://twrp.me/devices/asusTF300T.html
Also Download ROM+SuperSU: http://forum.xda-developers.com/transformer-tf300t/development/rom-t2932783
And GApps: http://forum.xda-developers.com/android/software/app-minimal-gapps-gapps-lp-20150107-1-t2997368
Push all files to sdcard with "adp push" or in CM. Like you want.
Flash TWRP. (you can skip this step if you already got TWRP 2.8.5.0 or higher version). You don't need latest one.
fastboot -i 0x0b05 flash recovery twrp.img
fastboot reboot
- or -
adb reboot recovery
Now, go into recovery and wipe everything:
- cache
- dalvik
- system
- data
After that flash ZIPs from sdcard. (use "add more zips" option)
1. ROM
2. Gapps
3. SuperSU
Next: Wipe cache and dalvik again (only these two).
Reboot and wait. First boot can take some minutes.

Thank you so much again. Everything work perfectly The rom looks a lot faster than the older one I had there. No issues yet at all. Just awesome. Thank you so much. Really appreciate your kindness and help. You have a nice day !

Thanks. Have fun with your tf300.

Trying to flash TRWP Moto Z recovery - not working

Hey everyone, longtime lurker here finally going to try to get involved more since I just got a new Moto Z and I don't have much of a background with motorola hardware/software. I'm trying to flash recoveries through fastboot and I can't seem to get it working. I'm probably going to wait a while before I try again since there is not much support for the moto z yet. I am running MPL24.246-45 v6.0.1 XT1650-03, I have unlocked the bootloader through the instructions on the motorola website.
On the bootloader screen I can confirm it is now unlocked, but everytime I flash the TRWP recovery through fastboot I get the error message: "<bootloader> img not working or corrupt". I am trying to flash the most recent twrp recoveries for moto Z (twrp-3.0.2-0-griffin.img) but wasn't able to successfully flash it.
Coming from a samsung background, I might be skipping a step or doing something wrong. I am running the bell canadian firmware. Since I messed up my partitions on my last phone I want to be careful with this one, I mostly want to figure out why I am getting this error while trying to flash the recovery when
my bootloader is unlocked and when I check "adb devices" my moto is being read.
Thanks!!
szork

spacezork said:
Hey everyone, longtime lurker here finally going to try to get involved more since I just got a new Moto Z and I don't have much of a background with motorola hardware/software. I'm trying to flash recoveries through fastboot and I can't seem to get it working. I'm probably going to wait a while before I try again since there is not much support for the moto z yet. I am running MPL24.246-45 v6.0.1 XT1650-03, I have unlocked the bootloader through the instructions on the motorola website.
On the bootloader screen I can confirm it is now unlocked, but everytime I flash the TRWP recovery through fastboot I get the error message: "<bootloader> img not working or corrupt". I am trying to flash the most recent twrp recoveries for moto Z (twrp-3.0.2-0-griffin.img) but wasn't able to successfully flash it.
Coming from a samsung background, I might be skipping a step or doing something wrong. I am running the bell canadian firmware. Since I messed up my partitions on my last phone I want to be careful with this one, I mostly want to figure out why I am getting this error while trying to flash the recovery when
my bootloader is unlocked and when I check "adb devices" my moto is being read.
Thanks!!
szork
Click to expand...
Click to collapse
didn't try it yet, but did you try renaming it to recovery.img (if on windows be sure extenstions are shown so it is not actually recovery.img.img) and run (didn't see which command you are using:
Code:
fastboot flash recovery recovery.img
but search around forums about encryption thing and similar

the ljubich said:
didn't try it yet, but did you try renaming it to recovery.img (if on windows be sure extenstions are shown so it is not actually recovery.img.img) and run (didn't see which command you are using:
Code:
fastboot flash recovery recovery.img
but search around forums about encryption thing and similar
Click to expand...
Click to collapse
I've tried both with the original twrp name and extension as well as with renaming it to recovery.img, didn't seem to make a difference. If I am connection to the device itself does that mean that adb/sideload is installed properly? I mean I was able to unlocked the bootloader so I would assume so.
szork

spacezork said:
I've tried both with the original twrp name and extension as well as with renaming it to recovery.img, didn't seem to make a difference. If I am connection to the device itself does that mean that adb/sideload is installed properly? I mean I was able to unlocked the bootloader so I would assume so.
szork
Click to expand...
Click to collapse
i really don't know then.. if you successfully unlocked bootloader then fastboot should be ok. you can check in device manager. it should be bootloader iterface not adb interface there (you got me confused with mentioning adb so I am just writing to be sure).
also check if your device is shown when typing
Code:
fastboot devices
or try redownloading twrp.
otherwise I am out of ideas, sorry.

the ljubich said:
i really don't know then.. if you successfully unlocked bootloader then fastboot should be ok. you can check in device manager. it should be bootloader iterface not adb interface there (you got me confused with mentioning adb so I am just writing to be sure).
also check if your device is shown when typing
Code:
fastboot devices
or try redownloading twrp.
otherwise I am out of ideas, sorry.
Click to expand...
Click to collapse
Sorry for my confusion with adb/sideload - from what I understand I need both to be able to connect to my device (correct me if im wrong). In the bootloader menu I see "flashing_unlocked" which I believe confirms my bootloader being unlocked, but then at the top of the text right under the dead android guy I see "AP Fastboot Flash Mode (Secure)" could that be an issue?
I can retry downloading the recovery from the TWRP site, but I know I'm downloading the official one already, just can't put my finger on why I'm getting that error message if others are doing it successfully.
thanks for helping :good:

Do you have the Verizon model?

samwathegreat said:
Do you have the Verizon model?
Click to expand...
Click to collapse
I have the canadian BELL model XT1650-03

spacezork said:
I have the canadian BELL model XT1650-03
Click to expand...
Click to collapse
You're at the bootloader, it says Flashing Unlock so yes your bootloader is unlocked and you should be able to flash TWRP no problem.
Did you recently install this .45 firmware? Are you sure that TWRP wasnt actually flashed? I see lots of errors like this from the bootloader and its usually just rubbish.

The twrp does not show the actual memory value of my cell phone and does not let me paste ROM backup, from insufficient memory? how to support it?

I updated my phone to .45 when I bought the phone I believe 1-2 weeks ago, it's definitely NOT flashed as the flashing process runs for 0.2 seconds and fails. I can even boot in the stock recovery afterwards confirming that nothing flashed. I wish I knew what I was doing wrong? possibility of drivers not installed properly?
Before I try and flash recovery I check USB debugging, OEM is unlocked, don't verify ADB files and accept Unknown sources. Is there anything I'm missing?

What if fastboot boot twrpname.img
It's really weird anyway...

enetec said:
What if fastboot boot twrpname.img
It's really weird anyway...
Click to expand...
Click to collapse
I've been doing fastboot flash twrpname.img after opening cmd terminal with SHIFT-MOUSE2 in the designated folder. I have not tried that command specifically what's the difference between doing fastboot flash/boot as far as flashing a recovery.img
edit: I've read on different articles that people sometimes try and flash from the recovery menu? I understood it has to be while your are on the bootloader screen, could it be something to do with that? Or is it still a possibility the drivers may not be installed properly.

spacezork said:
I've been doing fastboot flash twrpname.img after opening cmd terminal with SHIFT-MOUSE2 in the designated folder. I have not tried that command specifically what's the difference between doing fastboot flash/boot as far as flashing a recovery.img
edit: I've read on different articles that people sometimes try and flash from the recovery menu? I understood it has to be while your are on the bootloader screen, could it be something to do with that? Or is it still a possibility the drivers may not be installed properly.
Click to expand...
Click to collapse
With fastboot boot you send recovery to your phone and ask it to boot on it without really flashing it...
It's useful e.g. to take a full stock backup including original recovery, to test a recovery prior to flash it or to use TWRP to root BUT remain on stock recovery...
Not on all phones it works, but on Moto Z should....
P.S.: you have to be on fastboot screen not on recovery when flashing...

enetec said:
With fastboot boot you send recovery to your phone and ask it to boot on it without really flashing it...
It's useful e.g. to take a full stock backup including original recovery, to test a recovery prior to flash it or to use TWRP to root BUT remain on stock recovery...
Not on all phones it works, but on Moto Z should....
P.S.: you have to be on fastboot screen not on recovery when flashing...
Click to expand...
Click to collapse
by fastboot screen you mean the bootloader menu right?
I've been accessing cmd from designated folder with .img file in it
- adb fastboot recovery
- fastboot flash recovery.img..
and I get the "img not working or corrupt" after it tries to flash it (lasts 0.2 seconds) and nothing is done.

spacezork said:
by fastboot screen you mean the bootloader menu right?
I've been accessing cmd from designated folder with .img file in it
- adb fastboot recovery
- fastboot flash recovery.img..
and I get the "img not working or corrupt" after it tries to flash it (lasts 0.2 seconds) and nothing is done.
Click to expand...
Click to collapse
Right, bootloader screen. Enter on it by key-comb... not by command...
Even the real flash take same time... Sending seems to work, is something on verify that doesn't "like" it...
Try to download again recovery and/or check its MD5...

if reading correctly (and what I told you yesterday) command is
fastboot flash recovery recovery.img
and not
fastboot flash recovery.img

hi can any one help me i need to get back to stock and lock boot loader to update i have eu any one please ???????????

Troll amiga said:
hi can any one help me i need to get back to stock and lock boot loader to update i have eu any one please ???????????
Click to expand...
Click to collapse
try following this instructions: http://forum.xda-developers.com/showpost.php?p=69065373&postcount=14
and download eu rom from here: https://mirrors.lolinet.com/firmware/moto/griffin/official/RETEU/
i don't know from which ROM you are coming, don't know if downgrading works, but this was onl RETEU ROM i could find.

I have the exact same phone and I've upgraded to Nougat but I got my TWRP working. You need an unlocked bootloader and after upgrading to nougat, the option "unlock OEM" need to be enabled again.
I've used this TWRP : https://dl.twrp.me/griffin/twrp-3.0.2-0-griffin.img.html
Also I tried to only boot on it at first with the command fastboot boot twrp.img then I saw it was working, I flashed it with fastboot flash recovery twrp.img but got the error : (bootloader) image not signed or corrupt . But I booted the recovery from the bootloader and TWRP was working even with this error.

cilk said:
...I flashed it with fastboot flash recovery twrp.img but got the error : (bootloader) image not signed or corrupt . But I booted the recovery from the bootloader and TWRP was working even with this error.
Click to expand...
Click to collapse
Yeessss... I don't know how could I forgot it!!! :silly:
The message (I forgot I received too...) is *only* to indicate that recovery is not signed! But before there is a clear "Done" confirming the flash!
Just boot on it!

I somehow broke TWRP

I haven't really touched this tablet in a while, but i wanted to start using it again. I was running BlissPop. It was slow, and kept giving me an error when it was trying to update, so I decided to try a different ROM. So I downloaded the lineageOS ROM and tried to flash it.
However, TWRP kept giving me an error when I tried to flash the ROM. I don't remember exactly what the error was.
So, I thought that I needed to update TWRP. I tried through the "Official TWRP" app, but after doing so I was unable to boot into recovery mode at all. I could still get to the bootloader, but when I tried to select recovery mode it would give me an error and dump me back out to the bootloader menu.
I tried installing twrp through "TWRP Manager" app, but it just says "something went wrong"
I tried doing this using ADB. I connected the tablet, enabled USB debugging. If i do the ">adb devices" command, I can see the tablet. Then I did >adb reboot bootloader - which works, it reboots the device into the bootloader. But then I try and flash recovery and nothing happens, it just says <waiting for device>. And if I do > fastboot devices it doesn't list any devices.
If I reboot to the bootloader and select "Recovery Mode' i just get the nvidia boot logo and it stays there forever.
I don't know what else to try at this point.
I think I could get this to work if I could just get fastboot to recognize my device, but I'm not sure what's preventing that from happening.

mattlokk said:
I haven't really touched this tablet in a while, but i wanted to start using it again. I was running BlissPop. It was slow, and kept giving me an error when it was trying to update, so I decided to try a different ROM. So I downloaded the lineageOS ROM and tried to flash it.
However, TWRP kept giving me an error when I tried to flash the ROM. I don't remember exactly what the error was.
So, I thought that I needed to update TWRP. I tried through the "Official TWRP" app, but after doing so I was unable to boot into recovery mode at all. I could still get to the bootloader, but when I tried to select recovery mode it would give me an error and dump me back out to the bootloader menu.
I tried installing twrp through "TWRP Manager" app, but it just says "something went wrong"
I tried doing this using ADB. I connected the tablet, enabled USB debugging. If i do the ">adb devices" command, I can see the tablet. Then I did >adb reboot bootloader - which works, it reboots the device into the bootloader. But then I try and flash recovery and nothing happens, it just says <waiting for device>. And if I do > fastboot devices it doesn't list any devices.
If I reboot to the bootloader and select "Recovery Mode' i just get the nvidia boot logo and it stays there forever.
I don't know what else to try at this point.
I think I could get this to work if I could just get fastboot to recognize my device, but I'm not sure what's preventing that from happening.
Click to expand...
Click to collapse
Did you set:
Allow oem unlock in dev opt.
Fastboot protocol into BL?
Twrp app & manager need root to work.

Just flash the latest stock ROM first, lineageos requires having latest firmware.
I wrote a little guide not long ago about that (obviously, you can skip the F2FS steps if you don't need F2FS and just flash ROM after flashing latest TWRP)
Link

thanks for the help, i'll try and work through this soon.

fpozar said:
Just flash the latest stock ROM first, lineageos requires having latest firmware.
I wrote a little guide not long ago about that (obviously, you can skip the F2FS steps if you don't need F2FS and just flash ROM after flashing latest TWRP)
Link
Click to expand...
Click to collapse
I had seen your thread, and was intending on following it. nice post. 2 quick questions though
1) this is a shield tablet that was supposed to be remotely bricked by nvidia after the warranty claim. Will that happen if I flash the official recovery ROM?
2) how would I even flash that rom if I can't get recovery mode to work in trwp?
I think the root problem that I'm having is that I can't seem to connect to the device via fastboot (i'm sure i used the wrong terminology somehow)
edit: well I downloaded the USB driver for the shield tablet from nvidia, and i was able to install that (rather than the google usb driver). Fastboot finally recognized my device after that. I'm trying to flash the recovery now, but it doesn't seem to be doing anything, just been stuck on this screen for a while now: https://i.imgur.com/BUwj3Hx.png guess I'll continue to wait a while.
edit 2: well, finally got TWRP to flash over fastboot (https://i.imgur.com/tV1DqDv.png) however I still can't enter recovery mode. I just get the nvidia boot logo and then nothing happens. TWRP manager still says i don't have it installed either.
i'm about ready to give up on this... i've spent like 6 hours on this crap already and I feel like I keep getting further away from it.

mattlokk said:
I had seen your thread, and was intending on following it. nice post. 2 quick questions though
1) this is a shield tablet that was supposed to be remotely bricked by nvidia after the warranty claim. Will that happen if I flash the official recovery ROM?
2) how would I even flash that rom if I can't get recovery mode to work in trwp?
I think the root problem that I'm having is that I can't seem to connect to the device via fastboot (i'm sure i used the wrong terminology somehow)
edit: well I downloaded the USB driver for the shield tablet from nvidia, and i was able to install that (rather than the google usb driver). Fastboot finally recognized my device after that. I'm trying to flash the recovery now, but it doesn't seem to be doing anything, just been stuck on this screen for a while now: https://i.imgur.com/BUwj3Hx.png guess I'll continue to wait a while.
edit 2: well, finally got TWRP to flash over fastboot (https://i.imgur.com/tV1DqDv.png) however I still can't enter recovery mode. I just get the nvidia boot logo and then nothing happens. TWRP manager still says i don't have it installed either.
i'm about ready to give up on this... i've spent like 6 hours on this crap already and I feel like I keep getting further away from it.
Click to expand...
Click to collapse
Okay so I'm guessing you have stock ROM.
To flash TWRP you have to enter fastboot mode (vol down + power I believe) and flash the twrp image with fastboot flash recovery twrp.img (rename the shield tablet twrp to just twrp.img and place it into your easy adb and fastboot folder)
And DON'T reboot into OS, rather use your volume buttons to navigate to "restart to recovery" or just use hardware keys again directly from TWRP (vol up + power).
Good luck

fpozar said:
And DON'T reboot into OS, rather use your volume buttons to navigate to "restart to recovery" or just use hardware keys again directly from TWRP (vol up + power).
Good luck
Click to expand...
Click to collapse
Agreed. This is probably what is happening (as described on the TWRP webpage here:
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
Alternately, immediately rooting (flash SuperSU or Magisk) right after flashing TWRP, will prevent TWRP from being replaced with stock recovery.
Although the inconsistent fastboot connection, and how much trouble you had flashing TWRP initially, is a bit worrisome. Try using a different cable (maybe the one you are using is not connecting well?) try another USB port on the computer, and don't use a USB hub (connect direct to the PC).

Well, like they say: persistence is key. I kept pushing and trying new things until eventually.... I bricked the device. No, not really, it's working great now on LineageOS.
Thanks again to everyone who helped me out :good:. I'm still not sure exactly what caused TWRP to stop working on my device, however following this guide helped me fix it: https://forum.xda-developers.com/shield-tablet/help/help-stuck-nvidia-boot-screen-t3076462
The "flash-all.bat" restored everything to stock (including the recovery mode) and after that I was able to flash the latest TWRP and install Lineage.

Pixel 2 Magisk Bug won't take pin

Pixel 2 XL is soft bricked at the moment and I can't for the life of me think of what I need to do to recover it. I unlocked my bootloader and rooted when I switched to Pie, (I saw people we're already able to use Android pay on a rooted device again and I just couldn't help myself.) I installed twrp accidentally tried to flash TWRP not realizing I needed to temporary boot it and pushing the zip over erasing the recovery I proceeded to just fastboot it and carry on with the normal procedure with my phone. after getting Magisk installed I had my phone all set up until the next time I turned it on and back off again It said I forgot my PIN which I know I didn't I think this was because a glitch with smartlock I just setup so I go to my recovery and wipe the Dalvik cache, cache, Internal storage, and data and low and behold my phone bootloops never making past the final stage before it gets to the lockscreen. I go to Fastboot screen on my phone and my mac can't list my phone as a device in adb and now I am having issues getting back into recovery which I think might be because I am on the stock kernel my Fastboot screen on my phone says Product Name - Taimen, Variant - MSM USF:SAMSUNG(64gig) DDR:SAMSUNG, Bootloader version - TM220j, Baseband version - g899800253-1805232234, my Serial number, Serure boot - Yes, Device status - Unlocked, Vart console - Disabled, HW version - rev_10
I can't get it to stop bootlooping and just turn off.

bump

xda Zed said:
bump
Click to expand...
Click to collapse
Try flashing the stock boot.img with Fastboot. That might get you out of it. Since you did all the wiping I can't say for sure. However, when you were at the point where it wouldn't take your password, that's all that needed to be done. I ran into the same thing. It's a Magisk bug. Magisk gets flashed to the boot partition so flashing the factory boot.img will fix it. TWRP also gets flashed to the boot partition so if you flashed it too, flashing a factory boot image will get rid of that too. ADB won't see the phone while it's in fastboot mode. You need to use "fastboot devices". You can download a factory image if you don't have one and extract the boot.img from it. Put it in the folder your fastboot is in, and then open a command prompt (terminal? I'm not a MAC person) from that folder and type "fastboot flash boot boot.img" (without the quotes). Make sure you use download the factory image that's the same as what you currently have installed on the phone.

robocuff said:
Try flashing the stock boot.img with Fastboot. That might get you out of it. Since you did all the wiping I can't say for sure. However, when you were at the point where it wouldn't take your password, that's all that needed to be done. I ran into the same thing. It's a Magisk bug. Magisk gets flashed to the boot partition so flashing the factory boot.img will fix it. TWRP also gets flashed to the boot partition so if you flashed it too, flashing a factory boot image will get rid of that too. ADB won't see the phone while it's in fastboot mode. You need to use "fastboot devices". You can download a factory image if you don't have one and extract the boot.img from it. Put it in the folder your fastboot is in, and then open a command prompt (terminal? I'm not a MAC person) from that folder and type "fastboot flash boot boot.img" (without the quotes). Make sure you use download the factory image that's the same as what you currently have installed on the phone.
Click to expand...
Click to collapse
I stopped my endless bootloop! Now it says my device is corrupt and cannot be trusted and may not work properly when I tried to start it I couldn't get past the google screen. When I plug it into charge now it doesn't automatically going into a bootloop that can only be stoped by going into the fastboot mode or running out of battery, but the the charging symbol on the screen won't go away. I might have wiped system when I was in TWRP when I couldn't boot back after the first wipe. And I accidentally tried fastbooting Telstra img first. Anyway to get past this white Google screen? Also when I trey to go to recovery now it's the android laying on it's back with a red triangle and it says no command. Should I execute the flash-all script?

Downloaded the stock img files and ran the flash all .sh and now I am back in Android ready to mess something up again I could not thank you enough for your help I am so happy right now

xda Zed said:
Downloaded the stock img files and ran the flash all .sh and now I am back in Android ready to mess something up again I could not thank you enough for your help I am so happy right now
Click to expand...
Click to collapse
Glad to hear you got it working again. As for the recovery screen that say no command, that't the way it works with the stock recovery. When you see that screen, press and hold power and volume up. That will get you into recovery. If you happen to try rooting again and get stuck in a bootloop or some such thing, just flash the stock boot image.. That should get you going again.