Database Info

[Q] Can't access root and Google apps

I recently rooted my phone (T-Mobile US Nexus S) and installed the 4.0.3 OTA update from this thread, but now I cannot access any Google apps or get root access on any of the apps that require it.

SounderBruce said:
I recently rooted my phone (T-Mobile US Nexus S) and installed the 4.0.3 OTA update from this thread, but now I cannot access any Google apps or get root access on any of the apps that require it.
Click to expand...
Click to collapse
Ok! first download : http://www.4shared.com/zip/XG506hyV/icsroot-fastboot-recovey.html
just unpack, connect your device and click run.bat.....Good luck!

I ran the .bat, but I get an error saying "Device already rooted", but it is still not recognized as rooted by SuperUser.
Alternatively, is it possible to completely wipe the phone of everything (including root) so I can start over with a fresh phone?

Of course you can, and might be the best idea if you don't mind doing it.
Make sure you have the latest CWM recovery on your phone, download the FULL ROM from this thread (i'm not american so i don't know exactly, but from what i know yours is the I9020T, so get that ROM) and copy it to the SDCard. Now go into recovery, wipe system/data and dalvik cache, then flash the ROM.
Do make sure you have the right ROM though. This will get you 100% fresh and untouched 4.0.3. You can probably clear out any non-personal folders on the sdcard too, but that shouldn't do any harm anyway.
After this, use the attached file from this thread to root, and feel free to update root/superuser.

Actually, that's what I did...I can't use CWM recovery because its displaying an error of no root. So how do I wipe this or fix CWM?

Is your boot loader unlocked? And are you trying to flash cwm through fastboot?
Note to backup your sdcard if unlocking the bootloader.

Harbb said:
Is your boot loader unlocked? And are you trying to flash cwm through fastboot?
Note to backup your sdcard if unlocking the bootloader.
Click to expand...
Click to collapse
My bootloader is apparently unlocked and I'm trying to flash through fastboot.

Are you sure the following is satisfied:
-open padlock and google logo on boot
-fastboot (on phone) says "bootloader status: unlocked" or something of the like
-you are using: "fastboot flash recovery "C:\path\to\recovery.img""
-you are using the above command while connected to the PC via USB (with working drivers) and that you are in fastboot mode on the phone (turn off phone --> hold Vol. Up then hold Power TOGETHER for about 2 seconds, should give you reboot and recovery options)
It is necessary to be in the bootloader/fastboot interface on the phone when you run the command. Hopefully it was something simple that i said above, otherwise i'm completely lost.

1. Yes
2. Yes
3. I didn't use that method to root...
4. I'll try that.

3 is just flashing recovery, that is the code u type into cmd/terminal to reflash the recovery img. It isn't rooting the phone. 4 is how to get into the mode on the phone to use the command.
Its a bit confusing at first but makes much more sense once you do it one or two times.

Where do I go to get the recovery image?

The latest ClockWorkMod Recovery can be found on this page. Just scroll down to Nexus S and download 5.0.2.0 crespo .img. Then just direct fastboot to the folder you have it saved in while using the "fastboot flash recovery C:\path\to\recovery.img" command.

Ok. I've tried this, but in command prompt, I get the following error:
C:\Users\Bruce>fastboot flash recovery C:\Users\Bruce\Downloads\recovery.img
'fastboot' is not recognized as an internal or external command,
operable program or batch file.

Check out this rooting guide, however only go up to step 5 (and do NOT type "fastboot oem unlock", do everything up until that point). This will setup fastboot for you, and setup drivers for your computer. Once this is done, do what you did above and it should work successfully.
Remember to cd (change directory) in cmd to where you unzipped that folder.

There isn't a link...

Sorry, stuffed that up. I fixed the link in my previous post pointing to NexusSHacks - How to Root Nexus S.

It's worked, but when I try to go to the recovery menu, the Google/unlocked padlock screen freezes or it displays an Android with its chest compartment open and a red triangular ! symbol.

I just had a really long reply and managed to lose it by closing the page..
That's the stock bootloader you see there, it probably didnt flash or you rebooted your phone. And make sure that you are flashing the latest CWM you downloaded before.

I flashed the latest CWM, but when I try to go to recovery, my phone freezes at the Google logo with the unlocked padlock.

Have you tried flashing it again, or maybe redownloading the file? And of course making sure it is the NEXUS S version which you are downloading.
Alternatively, try just "fastboot boot recovery.img", replacing recovery.img with the full name and path of cwm.
edit: btw, i'll be gone for an hour or two Bruce so i can answer any more questions/issues when i get back

[Q] Did I really hard brick my TF300T?

Today I felt ambitious and tried to install a new JB rom (AOSPA 4.2.2). The instructions said that if I had 3 icons I would be on JB bootloader and that I would need to upgrade to the latest TWRP 2.5.0.0 (I was on 2.4.4.0). Well, what I missed is the fact that there were two different versions of 2.5.0.0 (one specifically for JB 4.2) and of course I flashed to wrong one.
Now when the tablet boots it goes straight to recovery and asks for a PW (I don't know the password and never set one). I can select cancel which lets me into the main menu but none of the functions actually have write access. Nothing mounts or lets me gain access to the internal memory. When I try to reboot it immediately goes back to recovery, never letting me get back into fastboot to install the correct version.
Reading some forums and doing some other google search I don't find anyone with exactly the same problem, but it seems that I cannot get out of this mess. I know that nvflash is out of question since that is not working on JB yet.
If anyone has encountered a similar issue or knows how I could potentially get fastboot to trigger again so I can flash the correct version of recovery, that would be a great start.
Thanks !!

Have a look here
http://forum.xda-developers.com/showpost.php?p=42254642&postcount=10

pjc21 said:
Have a look here
http://forum.xda-developers.com/showpost.php?p=42254642&postcount=10
Click to expand...
Click to collapse
Great, That is exactly what happened. Looks like I'll be looking for a new tablet.
I am wondering if the Google Nexus 10 would have a similar risk of bricking. Guess it's time to do some research.
Thanks.

anosis said:
Great, That is exactly what happened. Looks like I'll be looking for a new tablet.
I am wondering if the Google Nexus 10 would have a similar risk of bricking. Guess it's time to do some research.
Thanks.
Click to expand...
Click to collapse
You may want to check & confirm that fastboot will not flash (you don't get the blue bar on tab when flashing) before looking for a new tab, although this "fastboot flash brick" issue results about 90% of the time you may be lucky and be in that 10% that does not.
You should be able to access fastboot using the "adb reboot-bootloader" command while in recovery, if pc does not pick-up device for adb in recovery have a look here and follow on from the device manager part.
When you get to the bootloader menu have a look at the text in the top left and confirm which 4.2 bootloader version your on, either 10.6.1.8 or 10.6.1.15.3 - then download the correct twrp version for that bootloader and see if you can flash it via fastboot.
If that does not work, which will most likely not would you like to try something for me? which may or may not work, just an idea.
Download this file, unzip it & copy the bootloader.bin file in your android-sdk/platform-tools folder.
Boot back to fastboot using the adb reboot-bootloader command and try
Code:
fastboot -i 0x0b05 flash bootloader bootloader.bin
If this works and does not freeze the tab then
Code:
fastboot reboot-bootloader
If the tab does reboot to this command then check the bootloader version here in the bootloader menu and if it has worked it should say 10.4.2.20 in the text in the top left of the screen.
If by chance this has worked then you should also now have 4 icons in the bootloader as you will now be back on a 4.1 bootloader.
If this does work at all let me know for next steps.

pjc21 said:
You may want to check & confirm that fastboot will not flash (you don't get the blue bar on tab when flashing) before looking for a new tab, although this "fastboot flash brick" issue results about 90% of the time you may be lucky and be in that 10% that does not.
You should be able to access fastboot using the "adb reboot-bootloader" command while in recovery, if pc does not pick-up device for adb in recovery have a look here and follow on from the device manager part.
When you get to the bootloader menu have a look at the text in the top left and confirm which 4.2 bootloader version your on, either 10.6.1.8 or 10.6.1.15.3 - then download the correct twrp version for that bootloader and see if you can flash it via fastboot.
If that does not work, which will most likely not would you like to try something for me? which may or may not work, just an idea.
Download this file, unzip it & copy the bootloader.bin file in your android-sdk/platform-tools folder.
Boot back to fastboot using the adb reboot-bootloader command and try
Code:
fastboot -i 0x0b05 flash bootloader bootloader.bin
If this works and does not freeze the tab then
Code:
fastboot reboot-bootloader
If the tab does reboot to this command then check the bootloader version here in the bootloader menu and if it has worked it should say 10.4.2.20 in the text in the top left of the screen.
If by chance this has worked then you should also now have 4 icons in the bootloader as you will now be back on a 4.1 bootloader.
If this does work at all let me know for next steps.
Click to expand...
Click to collapse
Followed your google usb instructions to make ADB work. Executed the bootloader command and was greeted with the three icons (4.2 bootloader I believe). Then flashed the correct TWRP 2.5 4.2 (no blue progress bar) and waited for the command prompt to show successful write. Rebooted and when recovery started up, showed nothing was different. Still requires me to enter a PW and none of the mounts work.
Then followed your bootloader update instructions and while it said it was successful I only get three icons when in fastboot.
Should I try the older TWRP that I had on there before (2.4.4.0) to see if that at least lets me back in?

anosis said:
Followed your google usb instructions to make ADB work. Executed the bootloader command and was greeted with the three icons (4.2 bootloader I believe). Then flashed the correct TWRP 2.5 4.2 (no blue progress bar) and waited for the command prompt to show successful write. Rebooted and when recovery started up, showed nothing was different. Still requires me to enter a PW and none of the mounts work.
Then followed your bootloader update instructions and while it said it was successful I only get three icons when in fastboot.
Should I try the older TWRP that I had on there before (2.4.4.0) to see if that at least lets me back in?
Click to expand...
Click to collapse
Miraculously the tablet will allow me now to cold boot into the previous rom. That at least makes it usable again, but it probably means that I am stuck on this. Also strange is that the tablet now no longer is recognized as a USB device. I cannot access the internal ram??

Under 'About Tablet' my build # shows 10.6.1.14.4/US DEODEX. Not sure if this might help in fixing the recovery issue?
Anyway I am glad I don't have to spend money to get a replacement, but sure hope I can fix the existing recovery image issue.

So tried to flash back the previous version of TWRP and it will not. Even though the fastboot command prompt shows a successful flash nothing appears to be changed, which refers to the original issue that states that I am stuck on whatever rom is on this tablet.
Is the reason I cannot flash back an older or correct version because there is a permission issue? Is there something I can do directly from within the rom after it boots up, like the shell emulator?

Recovery failing to flash

So I flash the stock rom on it without thinking and now it wont let me flash a recovery to the tablet threw fastboot or goomanager and it wont update throguh asus update but its booting fine and wont take any updates at all i need help being pointed in the right direction!

I flashed the wrong bootloader i think and how do i flash the correct bootloader without a recover?

in fastboot im getting the error: cannot load 'file name' :no error weather its cm or twrp it wont load it and i dont know what to do please help

First of all it would be important to know what bootloader you are actually on. You do not want to flash a recovery that is not compatible with your bootloader!
So boot into the bootloader with Volume Down and POWER and read the tiny script. From there select the Android with Volume Down and boot back to system with Volume Up.
And then please report in detail what you are trying to do in fastboot, which commands you use etc.
Without knowing what you are doing we cannot tell you what you are doing wrong.....
First step: In fastboot command: fastboot devices - Do you see the serial number of your tab?

berndblb said:
First of all it would be important to know what bootloader you are actually on. You do not want to flash a recovery that is not compatible with your bootloader!
So boot into the bootloader with Volume Down and POWER and read the tiny script. From there select the Android with Volume Down and boot back to system with Volume Up.
And then please report in detail what you are trying to do in fastboot, which commands you use etc.
Without knowing what you are doing we cannot tell you what you are doing wrong.....
First step: In fastboot command: fastboot devices - Do you see the serial number of your tab?
Click to expand...
Click to collapse
bootloader version is us_epad-10.4.4.20-20121026
with a stock rom of 4.1.1
and trying to undo the rom cause im trying to put a stock 4.2.2 on it to get the drivers back on it from the stock rom.
in fastboot i just need to get a twrp installed and i can undo my mess

Skittleskitty said:
bootloader version is us_epad-10.4.4.20-20121026
with a stock rom of 4.1.1
and trying to undo the rom cause im trying to put a stock 4.2.2 on it to get the drivers back on it from the stock rom.
in fastboot i just need to get a twrp installed and i can undo my mess
Click to expand...
Click to collapse
So you are on an ICS bootloader with a JB rom... How the hell did you manage to do that?
You did not answer my question about fastboot. What you tried and what did not work.
But anyway, how I would proceed, just to get you back into safe territory, is to download the latest Asus firmware 10.6.1.14.10, unzip the downloaded file once and copy the resulting zip to the root of your internal SD.
Reboot, and hopefully the stock recovery will recognize the update file and flash you to JB 4.2.1 (which BTW is the latest version for our tabs - there never was, and probably never will be a 4.2.2). Flashing the stock firmware will replace the bootloader.
So from there you just have to get fastboot working, flash the latest TWRP and then the custom rom of your choice COMPATIBLE with your bootloader and recovery.
If that doesn't work we have to try something else. But try this first and report.

berndblb said:
So you are on an ICS bootloader with a JB rom... How the hell did you manage to do that?
You did not answer my question about fastboot. What you tried and what did not work.
But anyway, how I would proceed, just to get you back into safe territory, is to download the latest Asus firmware 10.6.1.14.10, unzip the downloaded file once and copy the resulting zip to the root of your internal SD.
Reboot, and hopefully the stock recovery will recognize the update file and flash you to JB 4.2.1 (which BTW is the latest version for our tabs - there never was, and probably never will be a 4.2.2). Flashing the stock firmware will replace the bootloader.
So from there you just have to get fastboot working, flash the latest TWRP and then the custom rom of your choice COMPATIBLE with your bootloader and recovery.
If that doesn't work we have to try something else. But try this first and report.
Click to expand...
Click to collapse
thank you so much that fixed it!!

ok i did all that but it removed fastboot what do i do to get it back?

Skittleskitty said:
ok i did all that but it removed fastboot what do i do to get it back?
Click to expand...
Click to collapse
Read the text in the upper left corner - current bootloaders enable fastboot in the bootloader menu automatically.

ok i got fastboot working and now it says when i got to flash the recovery it says error cannot open twrp.blob even though its the correct file.

Skittleskitty said:
ok i got fastboot working and now it says when i got to flash the recovery it says error cannot open twrp.blob even though its the correct file.
Click to expand...
Click to collapse
Then maybe it's not in your current directory.

Skittleskitty said:
ok i got fastboot working and now it says when i got to flash the recovery it says error cannot open twrp.blob even though its the correct file.
Click to expand...
Click to collapse
I think your tablet would be a lot safer if you did some reading here: http://lmgtfy.com/?q=fastboot+tutorial

berndblb said:
I think your tablet would be a lot safer if you did some reading here: http://lmgtfy.com/?q=fastboot+tutorial
Click to expand...
Click to collapse
i found that and have been reading it but fastboot still cant read the twrp.blob even though its in the directory with fastboot.

ok ive re installed fastboot and adb sdk and did the environment variable path and it still wont recognize the blob it wont recognize cwm .img files ether and what does key driver not found..booting os

Skittleskitty said:
i found that and have been reading it but fastboot still cant read the twrp.blob even though its in the directory with fastboot.
Click to expand...
Click to collapse
It has to be in your *current* directory.

_that said:
It has to be in your *current* directory.
Click to expand...
Click to collapse
thankyou it moved directorys on me that was the issue

How to update early TWRP withoput adb and spooling rom problem

I'd like to know how to update my TWRP from v 2.4.4.0 to a later version. This version doesn't seem to allow flashing of an img file on external sd card. I have tried without success on 2 computers to get windows to recognise this android, so I'm hoping there is another way. Eventually I'd like to install Katkiss,Gapps and SU on this android. At present it has no rom.
Secondly, I tried to install Cromi X and all goes well up until I reboot and it continually spools on the opening screen so I don't know what that is about but hoping with a later TWRP I may be able to set the partitioning better which may or may not be part of the cause.

Reboot recovery twrp.
Go to install.
Click on install image.
Search downloaded recovery.
Select recovery.
And install.
Done
sent from moto g2014 with cm13
---------- Post added at 03:12 AM ---------- Previous post was at 03:11 AM ----------
Ot use flashify app.
It requires root.
sent from moto g2014 with cm13

There is no 'install image' on v2.4.4.0 and that version of TWRP does not seem to recognise .img files on the external sd card. On a later version of TWRP your solution would work.

If you want to flash the recovery in recovery it has to be inside a flashable zip (except for the latest versions).
You can use the Kang TWRP 2.8.x from post 2 here: http://forum.xda-developers.com/tra...overy-kang-twrp-tf700t-2-8-x-xarea51-t3049395
You can flash Katkiss with it no problem, and it supports the dock SD which the official TWRP does not do.
Somewhere there's also a thread where some dude keeps posting TWRP 3.x in a flashable zip, but I can't think of where right now.
That CROMi-X does not boot can have a number of reasons:
You did not format data before flashing the rom
You are on an outdated bootloader
Something is physically wrong with your emmc.
Your problem to get the tablet recognized in Windows is almost certainly a driver problem an you should get that fixed. At minimum it sucks not to have fastboot access to the tablet. And it easily could be lethal. For the tablet - not for you
Could also be a problem with a cheap knock-off replacement USB cable. If you are not using the original Asus cable that's worth investigating. And if you are using the original it may become worn. Mine is starting to allow a connection only in certain positions... Age....
Make sure the device drivers are installed and try the Google Universal Naked drivers. Minimal ADB and fastboot is an excellent tool that shimp208 still keeps current after all this time, and if none of those work try the 15 second adb installer if you are on Win 7 or earlier (just google it).

Hello my old friend. Well I have finally managed to get an adb connection and am going over to old posts of previous help you gave me with this device. Although the device is now recognised I can't get any commands to work e.g. fastboot devices simply returns me to the c:/adb prompt and adb reboot bootloader just takes the flashing underline symbol to the next line and nothing happens. I have hope that I will be able to get this working OK now I have adb access. How do I know if I am on an outdated bootloader? thanks

plato2 said:
Hello my old friend. Well I have finally managed to get an adb connection and am going over to old posts of previous help you gave me with this device. Although the device is now recognised I can't get any commands to work e.g. fastboot devices simply returns me to the c:/adb prompt and adb reboot bootloader just takes the flashing underline symbol to the next line and nothing happens. I have hope that I will be able to get this working OK now I have adb access. How do I know if I am on an outdated bootloader? thanks
Click to expand...
Click to collapse
This is not the same device you helped me with earlier...it now purrs beautifully.... this is a new challenge.

plato2 said:
Hello my old friend. Well I have finally managed to get an adb connection and am going over to old posts of previous help you gave me with this device. Although the device is now recognised I can't get any commands to work e.g. fastboot devices simply returns me to the c:/adb prompt and adb reboot bootloader just takes the flashing underline symbol to the next line and nothing happens. I have hope that I will be able to get this working OK now I have adb access. How do I know if I am on an outdated bootloader? thanks
Click to expand...
Click to collapse
Thought you looked familiar..... :cyclops:
Time to re-read this I think http://forum.xda-developers.com/showthread.php?t=2688891
Boot into the bootloader and read the small script. The last bootloader for this tablet is 10.6.1.14.10.

Yes, that is the bootloader I have. Typing fastboot devices takes me back to the/adb prompt and then typing
fastboot -i 0x0B05 flash recovery <name-of-file>
I get a <waiting for device> but nothing happens.

plato2 said:
Yes, that is the bootloader I have. Typing fastboot devices takes me back to the/adb prompt and then typing
fastboot -i 0x0B05 flash recovery <name-of-file>
I get a <waiting for device> but nothing happens.
Click to expand...
Click to collapse
Yeah, so you have a driver problem. This is nothing you have to do now. Just download the flashable zip of Kang TWRP and flash it in your current recovery.
But when you have some time to kill open Device Manager and connect and disconnect the cable to the tablet. It should give you SOME change in device manager. If it doesn't, reboot both tablet and PC and try again.
Then try a different cable.
Still nothing? This could take longer. Driver problems suck in Windows....
So - you got yourself another TF700? Had just too much fun getting Katkiss to work on the last one, eh?

berndblb said:
Yeah, so you have a driver problem. This is nothing you have to do now. Just download the flashable zip of Kang TWRP and flash it in your current recovery.
But when you have some time to kill open Device Manager and connect and disconnect the cable to the tablet. It should give you SOME change in device manager. If it doesn't, reboot both tablet and PC and try again.
Then try a different cable.
Still nothing? This could take longer. Driver problems suck in Windows....
So - you got yourself another TF700? Had just too much fun getting Katkiss to work on the last one, eh?
Click to expand...
Click to collapse
Just download the flashable zip of Kand TWRP and flash it in your current recovery.
I don't know what you mean here.... how do I 'flash it in my current recovery' I have v 2.4.4.0 and it doesn't see img files on external sd.

plato2 said:
Just download the flashable zip of Kand TWRP and flash it in your current recovery.
I don't know what you mean here.... how do I 'flash it in my current recovery' I have v 2.4.4.0 and it doesn't see img files on external sd.
Click to expand...
Click to collapse
If you downloaded from the second link, the flashable zip, you will see a zip file, not an img file.
Just hit Install, select the zip and swipe the button. Reboot when the flash is finished

All good so far. Up to the wiping data bit before converting to f2fs but this guide is missing, not sure why. I recall it was only a short set of instructions: Once that is done follow this guide to convert internal data to f2fs: http://forum.xda-developers.com/tran...p-2-8-t3073471. Can you recall that part? thanks

Got it, found it or rather another post of yours here: tf700/help/how-to-update-twrp-withoput-adb-t3437702/post68163144#post68163144 so did that and successfully installed Katkis, Gapps pico and SU....another beautiful TF700T purring...many thanks yet again...

Trying to flash TRWP Moto Z recovery - not working

Hey everyone, longtime lurker here finally going to try to get involved more since I just got a new Moto Z and I don't have much of a background with motorola hardware/software. I'm trying to flash recoveries through fastboot and I can't seem to get it working. I'm probably going to wait a while before I try again since there is not much support for the moto z yet. I am running MPL24.246-45 v6.0.1 XT1650-03, I have unlocked the bootloader through the instructions on the motorola website.
On the bootloader screen I can confirm it is now unlocked, but everytime I flash the TRWP recovery through fastboot I get the error message: "<bootloader> img not working or corrupt". I am trying to flash the most recent twrp recoveries for moto Z (twrp-3.0.2-0-griffin.img) but wasn't able to successfully flash it.
Coming from a samsung background, I might be skipping a step or doing something wrong. I am running the bell canadian firmware. Since I messed up my partitions on my last phone I want to be careful with this one, I mostly want to figure out why I am getting this error while trying to flash the recovery when
my bootloader is unlocked and when I check "adb devices" my moto is being read.
Thanks!!
szork

spacezork said:
Hey everyone, longtime lurker here finally going to try to get involved more since I just got a new Moto Z and I don't have much of a background with motorola hardware/software. I'm trying to flash recoveries through fastboot and I can't seem to get it working. I'm probably going to wait a while before I try again since there is not much support for the moto z yet. I am running MPL24.246-45 v6.0.1 XT1650-03, I have unlocked the bootloader through the instructions on the motorola website.
On the bootloader screen I can confirm it is now unlocked, but everytime I flash the TRWP recovery through fastboot I get the error message: "<bootloader> img not working or corrupt". I am trying to flash the most recent twrp recoveries for moto Z (twrp-3.0.2-0-griffin.img) but wasn't able to successfully flash it.
Coming from a samsung background, I might be skipping a step or doing something wrong. I am running the bell canadian firmware. Since I messed up my partitions on my last phone I want to be careful with this one, I mostly want to figure out why I am getting this error while trying to flash the recovery when
my bootloader is unlocked and when I check "adb devices" my moto is being read.
Thanks!!
szork
Click to expand...
Click to collapse
didn't try it yet, but did you try renaming it to recovery.img (if on windows be sure extenstions are shown so it is not actually recovery.img.img) and run (didn't see which command you are using:
Code:
fastboot flash recovery recovery.img
but search around forums about encryption thing and similar

the ljubich said:
didn't try it yet, but did you try renaming it to recovery.img (if on windows be sure extenstions are shown so it is not actually recovery.img.img) and run (didn't see which command you are using:
Code:
fastboot flash recovery recovery.img
but search around forums about encryption thing and similar
Click to expand...
Click to collapse
I've tried both with the original twrp name and extension as well as with renaming it to recovery.img, didn't seem to make a difference. If I am connection to the device itself does that mean that adb/sideload is installed properly? I mean I was able to unlocked the bootloader so I would assume so.
szork

spacezork said:
I've tried both with the original twrp name and extension as well as with renaming it to recovery.img, didn't seem to make a difference. If I am connection to the device itself does that mean that adb/sideload is installed properly? I mean I was able to unlocked the bootloader so I would assume so.
szork
Click to expand...
Click to collapse
i really don't know then.. if you successfully unlocked bootloader then fastboot should be ok. you can check in device manager. it should be bootloader iterface not adb interface there (you got me confused with mentioning adb so I am just writing to be sure).
also check if your device is shown when typing
Code:
fastboot devices
or try redownloading twrp.
otherwise I am out of ideas, sorry.

the ljubich said:
i really don't know then.. if you successfully unlocked bootloader then fastboot should be ok. you can check in device manager. it should be bootloader iterface not adb interface there (you got me confused with mentioning adb so I am just writing to be sure).
also check if your device is shown when typing
Code:
fastboot devices
or try redownloading twrp.
otherwise I am out of ideas, sorry.
Click to expand...
Click to collapse
Sorry for my confusion with adb/sideload - from what I understand I need both to be able to connect to my device (correct me if im wrong). In the bootloader menu I see "flashing_unlocked" which I believe confirms my bootloader being unlocked, but then at the top of the text right under the dead android guy I see "AP Fastboot Flash Mode (Secure)" could that be an issue?
I can retry downloading the recovery from the TWRP site, but I know I'm downloading the official one already, just can't put my finger on why I'm getting that error message if others are doing it successfully.
thanks for helping :good:

Do you have the Verizon model?

samwathegreat said:
Do you have the Verizon model?
Click to expand...
Click to collapse
I have the canadian BELL model XT1650-03

spacezork said:
I have the canadian BELL model XT1650-03
Click to expand...
Click to collapse
You're at the bootloader, it says Flashing Unlock so yes your bootloader is unlocked and you should be able to flash TWRP no problem.
Did you recently install this .45 firmware? Are you sure that TWRP wasnt actually flashed? I see lots of errors like this from the bootloader and its usually just rubbish.

The twrp does not show the actual memory value of my cell phone and does not let me paste ROM backup, from insufficient memory? how to support it?

I updated my phone to .45 when I bought the phone I believe 1-2 weeks ago, it's definitely NOT flashed as the flashing process runs for 0.2 seconds and fails. I can even boot in the stock recovery afterwards confirming that nothing flashed. I wish I knew what I was doing wrong? possibility of drivers not installed properly?
Before I try and flash recovery I check USB debugging, OEM is unlocked, don't verify ADB files and accept Unknown sources. Is there anything I'm missing?

What if fastboot boot twrpname.img
It's really weird anyway...

enetec said:
What if fastboot boot twrpname.img
It's really weird anyway...
Click to expand...
Click to collapse
I've been doing fastboot flash twrpname.img after opening cmd terminal with SHIFT-MOUSE2 in the designated folder. I have not tried that command specifically what's the difference between doing fastboot flash/boot as far as flashing a recovery.img
edit: I've read on different articles that people sometimes try and flash from the recovery menu? I understood it has to be while your are on the bootloader screen, could it be something to do with that? Or is it still a possibility the drivers may not be installed properly.

spacezork said:
I've been doing fastboot flash twrpname.img after opening cmd terminal with SHIFT-MOUSE2 in the designated folder. I have not tried that command specifically what's the difference between doing fastboot flash/boot as far as flashing a recovery.img
edit: I've read on different articles that people sometimes try and flash from the recovery menu? I understood it has to be while your are on the bootloader screen, could it be something to do with that? Or is it still a possibility the drivers may not be installed properly.
Click to expand...
Click to collapse
With fastboot boot you send recovery to your phone and ask it to boot on it without really flashing it...
It's useful e.g. to take a full stock backup including original recovery, to test a recovery prior to flash it or to use TWRP to root BUT remain on stock recovery...
Not on all phones it works, but on Moto Z should....
P.S.: you have to be on fastboot screen not on recovery when flashing...

enetec said:
With fastboot boot you send recovery to your phone and ask it to boot on it without really flashing it...
It's useful e.g. to take a full stock backup including original recovery, to test a recovery prior to flash it or to use TWRP to root BUT remain on stock recovery...
Not on all phones it works, but on Moto Z should....
P.S.: you have to be on fastboot screen not on recovery when flashing...
Click to expand...
Click to collapse
by fastboot screen you mean the bootloader menu right?
I've been accessing cmd from designated folder with .img file in it
- adb fastboot recovery
- fastboot flash recovery.img..
and I get the "img not working or corrupt" after it tries to flash it (lasts 0.2 seconds) and nothing is done.

spacezork said:
by fastboot screen you mean the bootloader menu right?
I've been accessing cmd from designated folder with .img file in it
- adb fastboot recovery
- fastboot flash recovery.img..
and I get the "img not working or corrupt" after it tries to flash it (lasts 0.2 seconds) and nothing is done.
Click to expand...
Click to collapse
Right, bootloader screen. Enter on it by key-comb... not by command...
Even the real flash take same time... Sending seems to work, is something on verify that doesn't "like" it...
Try to download again recovery and/or check its MD5...

if reading correctly (and what I told you yesterday) command is
fastboot flash recovery recovery.img
and not
fastboot flash recovery.img

hi can any one help me i need to get back to stock and lock boot loader to update i have eu any one please ???????????

Troll amiga said:
hi can any one help me i need to get back to stock and lock boot loader to update i have eu any one please ???????????
Click to expand...
Click to collapse
try following this instructions: http://forum.xda-developers.com/showpost.php?p=69065373&postcount=14
and download eu rom from here: https://mirrors.lolinet.com/firmware/moto/griffin/official/RETEU/
i don't know from which ROM you are coming, don't know if downgrading works, but this was onl RETEU ROM i could find.

I have the exact same phone and I've upgraded to Nougat but I got my TWRP working. You need an unlocked bootloader and after upgrading to nougat, the option "unlock OEM" need to be enabled again.
I've used this TWRP : https://dl.twrp.me/griffin/twrp-3.0.2-0-griffin.img.html
Also I tried to only boot on it at first with the command fastboot boot twrp.img then I saw it was working, I flashed it with fastboot flash recovery twrp.img but got the error : (bootloader) image not signed or corrupt . But I booted the recovery from the bootloader and TWRP was working even with this error.

cilk said:
...I flashed it with fastboot flash recovery twrp.img but got the error : (bootloader) image not signed or corrupt . But I booted the recovery from the bootloader and TWRP was working even with this error.
Click to expand...
Click to collapse
Yeessss... I don't know how could I forgot it!!! :silly:
The message (I forgot I received too...) is *only* to indicate that recovery is not signed! But before there is a clear "Done" confirming the flash!
Just boot on it!