Database Info

[EXPERIMENTAL] [RECOVERY] [TWRP] Vivo V3 (non-max) Custom Recovery

[size=+2]TWRP Custom Recovery for Vivo V3[/size]
This is an experimental custom recovery for Vivo V3 based on TWRP version 3.0.2-0. You can use this recovery to flash custom ROMs and other flashable ZIPs. Full root access is available via an ADB shell.
Important - read before flashing
This is an experimental recovery. Whilst it will not prevent your device from booting back in to its normal ROM, I am not responsible for anything that goes wrong. If you flash this recovery to your device you will no longer be able to receive OTA updates for Funtouch OS and will have to install ROM updates manually unless you flash back to original stock recovery.
DOWNLOAD LINK
TWRP Custom Recovery
Flashing Instructions
1. Go to Settings, then More Settings, About Phone, and then tap Software version 10 times. It should now say that you are a developer.
2. Go to Settings, then More Settings, Developer Options. Turn on USB Debugging and Enable OEM Unlock.
3. Connect your phone to your computer. Authorize the USB debugging request on your phone screen.
4. If you haven't already, install ADB/Fastboot drivers. See here for further instructions: http://forum.xda-developers.com/showthread.php?t=2317790
5. Place the TWRP file from the download links above in your current directory
6. Completely power off your phone.
7. Hold the VOLUME DOWN and POWER buttons together until you see a black screen with FASTBOOT options.
8. In a command line window (or using Minimal ADB Fastboot if you used the above instructions), run this command:
Code:
fastboot flash recovery recovery-v3.img
9. If all went well the custom recovery has now been flashed. Use the volume buttons on your phone to select "RECOVERY" from the FASTBOOT options on-screen, then press the power button to confirm. You should now be in recovery mode! Congratulations!
Going back to stock recovery
Currently I have no original recovery image, so you will not be able to go back to stock recovery unless Vivo release it (unlikely).

Note to testers:
You can make a backup of the stock V3 recovery by flashing this TWRP recovery like so:
Code:
fastboot flash boot recovery-v3.img
fastboot reboot
This flashes the recovery to your boot partition rather than the recovery partition. You'll then be able to make a backup of the stock recovery in TWRP. After saving a copy to your SD card, flash back to your original boot partition like so:
Code:
fastboot flash boot boot-original-v3-1.8.20.img
fastboot reboot
Afterwards you can flash this TWRP to your recovery partition as normal and then you also have a stock recovery file too. Please upload it to this forum if you make a backup of stock.
The original stock boot image can be downloaded here if you need it: https://drive.google.com/file/d/0B0TtHsl8vcaLYTJhZHNHTFVfdGs/view?usp=sharing

hi
sorry for my bad english
i am tried with my v3 but when press the recovery button reboot to agin fastboot mode i analyse the recovery it is v3 max recovery img plz upload the device tree i will develiop the recovery
vivo v3 are sd 616 chip set and v3 max are sd652
---------- Post added at 01:57 AM ---------- Previous post was at 01:56 AM ----------
provide step for making the recovery for v3 max i will port to this v3

prabaecepct said:
sorry for my bad english
i am tried with my v3 but when press the recovery button reboot to agin fastboot mode i analyse the recovery it is v3 max recovery img plz upload the device tree i will develiop the recovery
vivo v3 are sd 616 chip set and v3 max are sd652
---------- Post added at 01:57 AM ---------- Previous post was at 01:56 AM ----------
provide step for making the recovery for v3 max i will port to this v3
Click to expand...
Click to collapse
Hello.
Making of custom recovery can be very difficult to explain but this thread tells you how to build TWRP recovery from source code.
Some pointers for building for Vivo V3 SD616:
1. Use Omni 5.1 sources instead of CM (see thread for more info)
2. Download latest V3 firmware from www.vivoglobal.com. Extract boot.img from the ZIP file and then use software called Android Image Kitchen (or similar) to extract the contents of boot.img.
3. From boot.img, find fstab.qcom file and make a note of its contents. You will need this information to make recovery.fstab file for TWRP.
4. From boot.img, find the "device fingerprint" and make a note of it. It's usually in default.prop file or can be somewhere else.
5. Make a note of the kernel command line options from the boot.img zImage split as they may be useful.
Finally:
If you manage to compile a full TWRP recovery for your phone but it does not boot, simply replacing the kernel from boot.img of latest firmware into the TWRP image may fix this. (again use Android Image Kitchen or similar).
I hope this helps. Sorry I can't be of more assistance.

hi i am upload the orinal stock recovery
plz bulid to the twrp our vivo v3
https://docs.google.com/uc?export=download&confirm=2Gic&id=0B-Tl2AxV63-aOFNYTGZvMXQzQ3c

prabaecepct said:
hi i am upload the orinal stock recovery
plz bulid to the twrp our vivo v3
https://docs.google.com/uc?export=download&confirm=2Gic&id=0B-Tl2AxV63-aOFNYTGZvMXQzQ3c
Click to expand...
Click to collapse
Please try this one based on your stock recovery
https://drive.google.com/open?id=0B0TtHsl8vcaLR25fZkR1YkloUTA

Hi i flashed only stock recovery are booting

Can i flash this recovery for vivo y51l

Simple answer no
nimesh.batra93 said:
Can i flash this recovery for vivo y51l
Click to expand...
Click to collapse
you will brick your phone , Only flash your phone`s compatible ROMs and Recoveries i.e those of your phone model and cpu structure . Also Vivo has not open sourced its development as other phone makers so making it custom friendly is freakin pain in the >> A$% . anyhow :good: keep your hopes up someone might just make a custom rom for VIVO once they hack into it. Till then stay away from anything that is not VIVO

For those who need the official VIVO V3 (non-max) recovery, I have the latest version here:
Original recovery image (Global ROM, non max)

Hy @liamcrayden,
do i need to unlock bootloader before i flash the twrp?

Hy @liamcrayden @prabaecepct ,
Seem that i can't install twrp to this devices before unlock it's bootloader.
I've tried to enabled developer option > enable usb debugging > enable OEM unlock
Went to fastboot mode and type : " fastboot oem unlock "
And it just give error message "FAILED (remote: unknown command or device is lock)"
My Software Version is PD1524F_EX_A_1.12.14 Lolipop 5.11 Funtouch OS 2.5
Do i need to downgrade my version?
Really apprecited if anyone can help me.

langithitam said:
Hy @liamcrayden @prabaecepct ,
Seem that i can't install twrp to this devices before unlock it's bootloader.
I've tried to enabled developer option > enable usb debugging > enable OEM unlock
Went to fastboot mode and type : " fastboot oem unlock "
And it just give error message "FAILED (remote: unknown command or device is lock)"
My Software Version is PD1524F_EX_A_1.12.14 Lolipop 5.11 Funtouch OS 2.5
Do i need to downgrade my version?
Really apprecited if anyone can help me.
Click to expand...
Click to collapse
I can finally unlock my Vivo V3 (Not Max). See attachment below.

Sithu Htun said:
I can finally unlock my Vivo V3 (Not Max). See attachment below.
Click to expand...
Click to collapse
Finally I am also unlocked.
Sent from my Vivo vivo V3 using XDA Labs

Sithu Htun said:
I can finally unlock my Vivo V3 (Not Max). See attachment below.
Click to expand...
Click to collapse
I flashed supersu using TWRP but its showing device not rooted

Can anyone provide me the twrp.img file for Vivo Y12

First working cwm for CUN-U29

Hello Everyone
------------------------------------------------------------------------
use this at your own risk
______________________________________________
i am new to this , this is my first porting for a recovery , i was able to port Carliv CWM for MTK Devices for Huawei Y5II CUN-U29 , tested by me , its still buggy , anyone ready to help , i will be glad .
known problems :
C:\adb>adb push su /data/local/tmp
** adb: error: failed to copy 'su' to '/data/local/tmp': remote Permission denied
su: 0 files pushed.(fixed)
** Don't use the wipe menu because it will break your device and you will have to flash it again
___________________________________________________
i will provide links to both custom and stock recovery
1- stock recovery :
https://mega.nz/#!uggS2CZb
key = !WqVoKufZAS8z9BEvhMHSbOZ0Yejn7AQuPvOvt7zEwWY
2- custom recovery :
Alpha version
mega.nz/#!us5FABRT
Key = !0n1UV1qYoos7aTO_j_lQqs6CAjN8dclX6GvAXs-hFvo
__________________________________________________________________
**UPDATE***
I was able to fix the bug that prevented sideload from giving the error
adb: error: failed to copy 'su' to '/data/local/tmp': remote Permission denied
New Link : -
https://mega.nz/#!7pAnxR6S
Key: !9mmH-ocpcw-iDJgzBmiqcZrwJye0BxCSrGsFaSlcNTw
___________________________________________________________________
Root
if you would like to obtain root which is what most people want all what you have to do is downloading this file
https://mega.nz/#!6h4GAaIA!jZszskXhViT4PD91QtMYb7Oond9eBUrpzXOPHG20-Pw
in the recovery click *install zip* choose *sideload* on your computer go to the directory where you have your adb and fastboot
for example mine is at c:\adb\ then copy the zip file to that location and use the following command
- adb sideload su.zip
- wait for the process to finish then reboot
- don't wipe anything because that will have to reflash the phone *bug*
- once its done booting you will find supersu in the list of applications
___________________________________________________________________
i need everyone feed back . and please don't steal my efforts .. always link to this thread ..
hit thank you if this helped you

How to Flash
1- you need to unlock your bootloader to flash this
2- you use the fastboot command to flash recovery
3 -fastboot flash recovery recovery.img

Root
its the only available root
Don't forget to hit Thank you button

Hi i have huawei y5ii cun u-29.
Last day i have edited the build.prop file and now it is stuck at bootloop. So i decided to factory reset my phone through custom recovery mentioned above but nothing happened, then accidentaly i have formated the system partition and now it is always stuck at huawei logo and never goes on doesn't charge.
So now my question is how to flash stock firmware on my device i haven't do the nandroid backup ........please helppp.

netcracker said:
Hi i have huawei y5ii cun u-29.
Last day i have edited the build.prop file and now it is stuck at bootloop. So i decided to factory reset my phone through custom recovery mentioned above but nothing happened, then accidentaly i have formated the system partition and now it is always stuck at huawei logo and never goes on doesn't charge.
So now my question is how to flash stock firmware on my device i haven't do the nandroid backup ........please helppp.
Click to expand...
Click to collapse
First i already mention you should not use this recovery to wipe anything , now if you want to fix your problem this device is an MTK device . you will need SP Flash tool and the firmware with the scatter file . you can flash by turning of the phone and press the volume down it will start automatically. you can find guide anywhere its easy .

Can't find Firmware File
[/B]
awab228 said:
First i already mention you should not use this recovery to wipe anything , now if you want to fix your problem this device is an MTK device . you will need SP Flash tool and the firmware with the scatter file . you can flash by turning of the phone and press the volume down it will start automatically. you can find guide anywhere its easy .
Click to expand...
Click to collapse
Thankx for the reply but i cant find the firmware for this model cun u29c578b127, the firmwares that are available are in different model like c567b124 or c578b124.
please can u find me the correct firmware to flash...really appreciate your work bro...

netcracker said:
[/B]
Thankx for the reply but i cant find the firmware for this model cun u29c578b127, the firmwares that are available are in different model like c567b124 or c578b124.
please can u find me the correct firmware to flash...really appreciate your work bro...
Click to expand...
Click to collapse
You can try to flash any other version , it wouldn't harm the device because it's an mtk , you can't break anything , but you have to remember you must uncheck the preloader when you want to flash because it will give you error , while you try to do that , I will try to make you a nandroid backup , it's a good chance to test the recovery anyway , It might take me a day or 2 because I am really busy . Try that firmware and post the results .

Oh I also forgot to mention that you will need sec version of the flash tool

Sec version of the flash tool
You will need the Sec version of the flash tool

netcracker said:
[/B]
Thankx for the reply but i cant find the firmware for this model cun u29c578b127, the firmwares that are available are in different model like c567b124 or c578b124.
please can u find me the correct firmware to flash...really appreciate your work bro...
Click to expand...
Click to collapse
awab228 said:
You will need the Sec version of the flash tool
Click to expand...
Click to collapse
ok so how could i get that sec version?
will it be included in the flash file?

It might be included , or you can try to Google it , this might work http://gsm-firmware.com/index.php?a=browse&b=file-info&id=11531

It's all related to the download agent , swc

root key not working.plz chk

please help us with key root not right
jZszskXhViT4PD91QtMYb7Oond9eBUrpzXOPHG20
not work pleeeeese help

how to root HUAWIE y5ii cun-u29 using CWM(clockworkmod)?
flash this using ADB! , files are in my gmail don't worry I share it to you !
*Im not responsible for bricking your device! , so do it on your own risk !
_______________________________________
what you need ?
- PC
- huawie y5ii cun-u29 files : https://drive.google.com/…/1tB-EmfZQPV0hgTd7a1qJk-j_9T…/view
- cord
- your phone (MODEL: HUAWEI CUN-29)
- huawie drivers: http://phoneusbdrivers.com/huawei-y5ii-usb-driver/
- BRAIN
______________________________________
step:
1. Get bootloader unlock code: https://emui.huawei.com/en/plugin/unlock/index
adb instruction:
2. Enter fastboot mode [voldwn+pwr] and unlock bootloader commands:
" fastboot oem unlock xxxxxxxxxxxxxxxxxx "
(put the unlock code)
2. Download and flash recovery.img , from fastboot commands
: " fastboot flash recovery xxxxxxxx.img "
(remove the battery after you flash this command and put it back again, then proceed step 3)
3. Enter CWM recovery mode [volup+pwr] flash su.zip and its done!
download root checker on playstore to see if its all working , if not try it again .
_______________________________________
I'll make a video on youtube for more tutorials.
- CHANIX

Files are already shared
Files are already shared at the beginning of the post ,

password not working
Hi, please could you re-upload the root file?, the password is not working. Please i've tried a lot of files and they don't work,
i believe yours is the only functional one.
awab228 said:
Files are already shared at the beginning of the post ,
Click to expand...
Click to collapse

Fixed the link
jimmyvelasco said:
Hi, please could you re-upload the root file?, the password is not working. Please i've tried a lot of files and they don't work,
i believe yours is the only functional one.
Click to expand...
Click to collapse
Hello ,
I just fixed the link
https://mega.nz/#!6h4GAaIA!jZszskXhViT4PD91QtMYb7Oond9eBUrpzXOPHG20-Pw

Hi can you please help me when I try to flash custom ROM from the SD Card it's says that same error (status 0) can you please help me

Wassim aoufi said:
Hi can you please help me when I try to flash custom ROM from the SD Card it's says that same error (status 0) can you please help me
Click to expand...
Click to collapse
i don't have access to this device anymore , i didn't finish the work on this devices , i will try to build a new version in the coming week

Root Gigaset GS4

Hi guys. Is there any root method for the Gigaset Gs4? Thanks.

Anyone?

As long as you have the stock images there is.
Im currently trying to get the stock ROM in any way. If anyone has some tips please reply
Currently I'm trying to get the stock ROM using the image here: https://www.google.com/amp/s/unofficialtwrp.com/download-twrp-3-2-3-mediatek-mt6771-8-1/?amp
I hope that I can extract boot.img with it, to patch it with magisk.
Also take a look here:
Amazing Temp Root for MediaTek ARMv8 [2020-08-24]
Software root method for MediaTek MT67xx, MT816x, and MT817x! So it's no big secret that not too long ago, I found a way to achieve temporary root on MediaTek chipsets. No preinstalled root solution or device unlock was needed. The tool I...
forum.xda-developers.com
Edit: I found another image for the mt6771 that might work as well but keep in mind that it is not made for the Gigaset GS 4: https://www.techswizz.com/twrp-recovery-for-cubot-note-20-pro/ DOES NOT WORK!!
As soon as I got the patched image I think you can use this bypass to flash it: https://www.xda-developers.com/bypass-mediatek-sp-flash-tool-authentication-requirement/amp/ DOES NOT WORK!!

StarMiner99 said:
As long as you have the stock images there is.
Im currently trying to get the stock ROM in any way. If anyone has some tips please reply
Currently I'm trying to get the stock ROM using the image here: https://www.google.com/amp/s/unofficialtwrp.com/download-twrp-3-2-3-mediatek-mt6771-8-1/?amp
I hope that I can extract boot.img with it, to patch it with magisk.
Also take a look here:
Amazing Temp Root for MediaTek ARMv8 [2020-08-24]
Software root method for MediaTek MT67xx, MT816x, and MT817x! So it's no big secret that not too long ago, I found a way to achieve temporary root on MediaTek chipsets. No preinstalled root solution or device unlock was needed. The tool I...
forum.xda-developers.com
Edit: I found another image for the mt6771 that might work as well but keep in mind that it is not made for the Gigaset GS 4: https://www.techswizz.com/twrp-recovery-for-cubot-note-20-pro/
As soon as I got the patched image I think you can use this bypass to flash it: https://www.xda-developers.com/bypass-mediatek-sp-flash-tool-authentication-requirement/amp/
Click to expand...
Click to collapse
i managed to extract the stock boot.img and recovery.img using this guide with some modifications:
How to use Wwr MTK + SP Flash tool to backup Mediatek rom
This is a step-by-step guide on how to use Wwr MTK tool & SP flash tool to backup Mediatek (MTK) firmware. We had previously created guides on how to backup or dump firmware from a Mediatek (MTK) devi
forum.hovatek.com
things i did different:
i could not preform the ram test to determine the size of emmc_user so i just used a random length(0x3a3e00000) later on WwR told me that emmc_user should be: 0xe8f800000 i used this value to again read the emmc_user region and loaded it into WwR and continued on the rutorial.
now with this information we should be able to patch boot.img using magisk and flash it to our devices to root it.
to flash your device do the following: reboot into fastboot mode (power + volume up and select fastboot) then in a terminal type:
to unlock the bootloader:
fastboot flashing unlock
to flash an image to your device:
fastboot flash <partition> <image>
the stock images and the scatter file will follow

I managed to succesfully root my smartphone using magisk there was a single problem which is the following:
Android verified boot
you need to flash a new vbmeta image
i made my own empty vbmeta image and flashed it now its working and my smartphone is rooted

[HOW TO ROOT AND HOW TO INSTALL TWRP]
DISCLAIMER:
I will not be responsible for any damage to you device !!!!
step 1 :
make a backup of your smartphone data
step 2 :
unlock your bootloader
1. go to settings -> about phone -> click a few times on the build number
2. go to settings -> system -> developer options -> allow OEM unlocking
step 3 :
install adb and fastboot on your computer
https://forum.xda-developers.com/t/tool-minimal-adb-and-fastboot-2-9-18.2317790/ <- you can download a minimal version here
step 4 :
enable usb debugging
go to settings -> system -> developer options -> enable usb-debugging
step 5 :
open a console on your computer and do the adb and fastboot stuff
type the following commands into your cmd:
adb reboot bootloader <- this will reboot your smartphone into fastboot mode
wait until your phone enters fastboot mode
as soon as your phone entered fastboot mode type the following:
fastboot flashing unlock <- this will unlock your bootloader you have to press volume up to confirm it
then flash vbmeta and magisk patched:
fastboot flash vbmeta vbmeta_disabled.img <- this will flash the new vbmeta file
[ROOT]
fastboot flash boot magisk_patched-23000_tvNQq.img <- this will flash the new boot image
[TWRP]
fastboot flash recovery twrp.img <- this will flash the new recovery image
step 6 :
reboot your phone and reconfigure it
Youre Done!
EDIT: please download the twrp image from the official TWRP site: https://twrp.me/gigaset/gigasetgs4.html

@StarMiner99 as I'm thinking about buying it I'm glad to know it can be rooted.

bmwdroid said:
@StarMiner99 as I'm thinking about buying it I'm glad to know it can be root
Click to expand...
Click to collapse
well it was not easy to get the stock images xD

im currently also trying to port lineage os and twrp to the gigaset gs4

StarMiner99 said:
im currently also trying to port lineage os and twrp to the gigaset gs4
Click to expand...
Click to collapse
That's good to hear.
Although if it can be rooted it might be sufficient for me to kill all not needed apps via adb and use Magisk for AFWall+.
Actually I've read about the possibility of a GS version with a better camera so I might wait a while before getting one.

well there arent any unneeded apps

[STOCK ROM + SCATTER FILES + PRELOADER]
here are the stock rom files, the scatter file and the preloader in a zip archive
1.5 GB file on MEGA
mega.nz

StarMiner99 said:
[STOCK ROM + SCATTER FILES + PRELOADER]
here are the stock rom files, the scatter file and the preloader in a zip archive
1.5 GB file on MEGA
mega.nz
Click to expand...
Click to collapse
Hey StarMiner99, is the ADUPS software updating malware in the image you uploaed still working? Could hyou please explain briefly how to flash this stock rom? I have adb and fastboot already running and a rooted device too.
Thanks a lot!

StarMiner99 said:
im currently also trying to port lineage os and twrp to the gigaset gs4
Click to expand...
Click to collapse
any progress on this?
could i do something to help?

First of all: Thank you very much! Everything has worked so far and the device is rooted.
But I still have one question. How does the device behave when the official updates from Gigaset are installed via OTA? The GS4 reports it would have security updates. Can I install them without losing root privileges? Does anyone already have experience? Thanks in advance!

UserSven said:
First of all: Thank you very much! Everything has worked so far and the device is rooted.
But I still have one question. How does the device behave when the official updates from Gigaset are installed via OTA? The GS4 reports it would have security updates. Can I install them without losing root privileges? Does anyone already have experience? Thanks in advance!
Click to expand...
Click to collapse
I have now simply installed the June 2021 update. The good news: It worked. The slightly less good news is that you have to flash the images again. But flashing also works with the latest version and the update check tells that there are no new updates. So it seems to work.

UserSven said:
I have now simply installed the June 2021 update. The good news: It worked. The slightly less good news is that you have to flash the images again. But flashing also works with the latest version and the update check tells that there are no new updates. So it seems to work.
Click to expand...
Click to collapse
Which recovery do you use?
I've read in their forum that updating doesn't work when on TWRP.

StarMiner99 said:
im currently also trying to port lineage os and twrp to the gigaset gs4
Click to expand...
Click to collapse
Why are you not just using the LineageOS GSI?
I have LineageOS17.1 running on my GS4 since Feb. without any issues so far.

ChrisMucDev said:
Why are you not just using the LineageOS GSI?
I have LineageOS17.1 running on my GS4 since Feb. without any issues so far.
Click to expand...
Click to collapse
Is there a tutorial on how to do that?

Wolfgang-Z said:
Is there a tutorial on how to do that?
Click to expand...
Click to collapse
Here is, what I did: (on your own risk)
As far as i can remember, i did not have any issues.
Step 1: Unlock your device
1. Enable Developer Options: Tap 10x on Build-Number (Setttings -> About the phone -> Build-Number)
2. Enable Bootloader Unlocking -> activate OEM-Unlock option (Settings -> System -> (More) -> Developer-Options)
3. Enable ADB Access -> Enable USB-Debugging / ADB (Settings -> System -> (More) -> Developer-Options)
4. (Set USB-Settings (Message-Center) from "No tx" to "PTP")
5. Connect phone to usb port, grant permissions on phone and check connection with `adb devices`
6. Boot to bootloader: `adb reboot bootloader`
7. Unlock Bootloader: `fastboot flashing unlock`
Step 2: Download GSI
1. Reboot your phone and install Treble Info App
(https://play.google.com/store/apps/details?id=tk.hack5.treblecheck&hl=en&gl=US)
GS4 should support AB-Partitions
2. Download GSI: https://sourceforge.net/projects/andyyan-gsi/files/
For GS4: treble_arm64_bv*
Step 3: Install GSI
1. Boot to recovery: `adb reboot recovery` or Volume Down + Power
2. Wipe data
3. Wipe cache
4. Enter fastboot
5. Flash GSI: `fastboot flash system <extracted-gsi-image>`
6. Reboot and enjoy
*. (just in case it does not boot, reboot to recovery -> enter fastboot and flash vbmeta: `fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img`)
This vbmeta-image should work (see post #6): https://forum.xda-developers.com/attachments/vbmeta_disabled-img.5325563/

TWRP][UNOFFICIAL] TECNO KE7(Spark 6) [AIO Guide bootloader unlocking,root,twrp & stock firmware]

TECNO SPARK 6 (KE7)
Note: Root at your own risk
I am not responsible for any data loss or brick
# Twrp recovery for hot 9 play
Device- Infinix Hot 9 play
Variant :
Build Number: KE7-H693HJKM-Q-GL
Build Number: KE7-H693GHIJKM-Q-GL
1. Bootloader Unlocking
1. Download & install ADB driver
2.Enable devloper mode by taping on Build verson(setting->my phone) then enable Oem Unlock & usb debugging from (settings->System->Devloper option)
3.Now connect device & open ADB path & run cmd
command: ADB devices
then reboot to bootloader
command: ADB reboot bootloader
4. unlock bootloader
command: fastboot flashing unlock the phone will ask to confirm
5. now reboot to system
command:fastboot reboot
If you are stuck waiting for the device screen
2. TWRP [unoficial]
https://forum.xda-developers.com/t/tecno-spark-6-ke7-twrp-recovery.4378575/
3.Orange state disabler:
Flashing guide & zip file
Click Wipe →Format Data → Yes → Press Enter.
Then Click Reboot → Recovery (Reboot to Recovery ).
After this, TWRP Recovery Mode will be installed on your phone
Link: Orange disabler.zip
4. Root
1. boot into recovery
2. Flash magisk .zip
llink:https://github.com/topjohnwu/Magisk/releases/download/v21.0/Magisk-v21.0.zip
4.1. Unroot
1. boot into recovery
2. Flash magisk unistaller .zip
link:https://github.com/topjohnwu/Magisk/releases/download/v21.0/Magisk-uninstaller-20201003.zip
5. Gsi rom / Custom rom Installation guide:
https://forum.xda-developers.com/t/custom-rom-for-tecno-phone-dynamic-partition.4379341/
6. Phone Hard Brick fix ;
https://forum.xda-developers.com/t/phone-soft-brick-phone-on-off-poblem-tecno-device.4378501/
# Flash file :
Variant :
1.KE7-H693HJKM-Q-GL-211111V450
2.KE7-H693GHIJKM-Q-GL-200617V060
HIT THE THANKS BUTTON IF THE ABOVE INFORMATION IS HELPFUL TO YOU

bro.. the twrp after flash for my spark 6 touch not working on twrp recovery how to fix?

Tyranthead said:
bro.. the twrp after flash for my spark 6 touch not working on twrp recovery how to fix?
Click to expand...
Click to collapse
your phone build number screenshot

This my build No. Bro

Tyranthead said:
This my build No. Bro
Click to expand...
Click to collapse
Otg work twrp tested
Your build number flash files not found

Tyranthead said:
bro.. the twrp after flash for my spark 6 touch not working on twrp recovery how to fix?
Click to expand...
Click to collapse
Bro custom rom install :
Gsi Installation guide:
https://forum.xda-developers.com/t/custom-rom-for-tecno-phone-dynamic-partition.4379341/

Parvej789 said:
Bro custom rom install :
Gsi Installation guide:
https://forum.xda-developers.com/t/custom-rom-for-tecno-phone-dynamic-partition.4379341/
Click to expand...
Click to collapse
thanks for this guide Bro ,

Tyranthead said:
This my build No. Bro
Click to expand...
Click to collapse
your phone twrp upload.
work for an: 10,11

Brother... You have Idea bout this my problem... Now my IMEI no. Is in invalid and now when I use (Maui Meta) it always failed (like this "Connecting MD ) it says failed and now I can't use my phone on DATA connection

Tyranthead said:
Brother... You have Idea bout this my problem... Now my IMEI no. Is in invalid and now when I use (Maui Meta) it always failed (like this "Connecting MD ) it says failed and now I can't use my phone on DATA connection
Click to expand...
Click to collapse
Flash file :https://mega.nz/file/kiZxgKAS#h4S-kb213onhKjOmFlj0xfP1cygZdL0wdDqaeB5UfK8
visit:https://forum.xda-developers.com/t/hard-brick-fix-tecno-infinix-phone-flashing-guide.4378501/

Parvej789 said:
Flash file :https://mega.nz/file/kiZxgKAS#h4S-kb213onhKjOmFlj0xfP1cygZdL0wdDqaeB5UfK8
visit:https://forum.xda-developers.com/t/hard-brick-fix-tecno-infinix-phone-flashing-guide.4378501/
Click to expand...
Click to collapse
Always failed when I used that Tool with Maui meta... Bro.. you have files backup like "NVRAM and NVdata

Tyranthead said:
Always failed when I used that Tool with Maui meta... Bro.. you have files backup like "NVRAM and NVdata
Click to expand...
Click to collapse
bro
No backup

any twrp tecno povouir 4?

hasib03 said:
any twrp tecno povouir 4?
Click to expand...
Click to collapse
Your build number

hasib03 said:
View attachment 5559713
Click to expand...
Click to collapse
Bro treble info.apk install and open screenshot give me

Parvej789 said:
Bro treble info.apk install and open screenshot give me
Click to expand...
Click to collapse

Hello, whenever I try to root my device I end up in bootloop, I followed the steps in your video (the one how to install a GSI rom on spark ke7). what can i do to root my device?

Twrp For Tecno Spark 8 Pro (KG8) Root & Other Guide

[ AIO ] Guide TECNO SPARK 8 PRO (KG8) bootloader unlocking,root,twrp & stock firmware​## Device specifications
| Device: Tecno spark 8 pro
| Codename:KG8
| SoC: MediaTek Helio G85 (12nm)
| Memory: 4GB/6GB RAM
| Shipped Android version: 11
| Storage: 64/128GB
| Battey : Li-Po 5000 mAh, non-removable
| Build number: KG8-H698CDEFGH-R-GL
Note: Root at your own risk
I am not responsible for any data loss or brick
1. Bootloader Unlocking :
1. Download & install the ADB driver
2. boot unlock zip( Build number check and download )
2.Enable developer mode by taping on Build version(setting->my phone) then enable Oem Unlock & USB debugging from (settings->System->Devloper option)
3. boot unlock zip Extract.
4. Connect Mobile Withe Pc using Data Cable
5.boot unlock folder open & flash.bat click
6.cmd open tyep y and enter
7.phone boot into botloader
8.phone display command boot unlock yes / no
9. phone up volume click
10. phone unlock and phone on
Boot unlock Zip Link:
1.V622
2.V713
3.V722
If you are stuck waiting for the device screen
2. TWRP :https://forum.xda-developers.com/t/tecno-kg8-recovery.4477429/
3. Orange state disabler:
Flashing guide & zip file
Click Wipe →Format Data → Yes → Press Enter.
Then Click Reboot → Recovery (Reboot to Recovery ).
After this, TWRP Recovery Mode will be installed on your phone
Link:
4. Root
1.boot into recovery
2. Flash magisk .zip
llink:Magisk .25.zip
6. Gsi rom / Custom rom Installation guide:https://forum.xda-developers.com/t/custom-rom-installation-for-arm64-a-b-device-other-guide.4477513/
7. Phone Hard Brick fix
7.1. Flash file:
Link :
KG8-H698CDEFGH-R-GL-211217V622
HIT THE THANKS BUTTON IF ABOVE INFORMATION IS HELPFUL TO YOU

custom recovary tuch not work pls fixed it!!! stock farmware not flashing not work!! pls make a video flashing pixel experience rom

make a full video process in youtube

Parvej789 said:
[ AIO ] Guide TECNO SPARK 8 PRO (KG8) bootloader unlocking,root,twrp & stock firmware​## Device specifications
| Device: Tecno spark 8 pro
| Codename:KG8
| SoC: MediaTek Helio G85 (12nm)
| Memory: 4GB/6GB RAM
| Shipped Android version: 11
| Storage: 64/128GB
| Battey : Li-Po 5000 mAh, non-removable
| Build number: KG8-H698CDEFGH-R-GL
Note: Root at your own risk
I am not responsible for any data loss or brick
1. Bootloader Unlocking :
1. Download & install the ADB driver
2.Enable developer mode by taping on Build version(setting->my phone) then enable Oem Unlock & usb debugging from (settings->System->Devloper option)
3.Now connect device & open ADB path & run cmd:
command:
adb device
adb reboot bootloader
fastboot flashing unlock
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta_system.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta_vendor.img
fastboot flash boot boot.img
download link :
Your flash file to copy boot .img
vbmeta
If you are stuck waiting for the device screen
2. TWRP :https://forum.xda-developers.com/t/tecno-kg8-recovery.4477429/
3. Orange state disabler:
Flashing guide & zip file
Click Wipe →Format Data → Yes → Press Enter.
Then Click Reboot → Recovery (Reboot to Recovery ).
After this, TWRP Recovery Mode will be installed on your phone
Link:
4. Root
1.boot into recovery
2. Flash magisk .zip
llink:Magisk .25.zip
6. Gsi rom / Custom rom Installation guide:https://forum.xda-developers.com/t/custom-rom-installation-for-arm64-a-b-device-other-guide.4477513/
7. Phone Hard Brick fix
7.1. Flash file:
Link :
KG8-H698CDEFGH-R-GL-210927V249
HIT THE THANKS BUTTON IF ABOVE INFORMATION IS HELPFUL TO YOU
Click to expand...
Click to collapse

My phone is tecno spark 8 pro Kg8 and should i use my verison vb meta file?

Anik111 said:
custom recovary tuch not work pls fixed it!!! stock farmware not flashing not work!! pls make a video flashing pixel experience rom
Click to expand...
Click to collapse
Its working or not in TECNO SPARK 8 PRO KG8-GL

My phone is TECNO spark 8 pro kg8-Gl builder number /KG8-H698CDEFGH-R-GL-220620V722/ it will work in my mobile or not

Ibrahim200675 said:
Its working or not in TECNO SPARK 8 PRO KG8-GL
Click to expand...
Click to collapse
Ok bro
wait some time.

Ibrahim200675 said:
My phone is TECNO spark 8 pro kg8-Gl builder number /KG8-H698CDEFGH-R-GL-220620V722/ it will work in my mobile or not
Click to expand...
Click to collapse
will work.
Bro

Tell me a installation process only plz i cant understand

Tomorrow video uploaded.
Bro
Please wait

Ibrahim200675 said:
Tell me a installation process only plz i cant understand
Click to expand...
Click to collapse
Tomorrow video uploaded.
Bro
Please wait

Parvej789 said:
Tomorrow video uploaded.
Bro
Please wait
Click to expand...
Click to collapse
Ok

Did you make video please give me video link

PLEASE UPLOAD VIDEO OF HOW TO INSTALL TWRP

Where is installation process video people cant install please upload video

Make a video how to install

Where is youtube video hatefully dislike

Ibrahim200675 said:
Make a video how to install
Click to expand...
Click to collapse
Not due to busy work. Inshallah I will give it tomorrow

Parvej789 said:
Not due to busy work. Inshallah I will give it tomorrow
Click to expand...
Click to collapse
Give tomorrow full video iam waitinn from 3 days