Database Info

Infinix Smart Root

Root for Infinix Smart (X5010) is currently needed, android v7.0
Responses will be highly appreciated. Thanks in advance

Kxng99 said:
Root for Infinix Smart (X5010) is currently needed, android v7.0
Responses will be highly appreciated. Thanks in advance
Click to expand...
Click to collapse
grab a custom recovery for mt6580 and port it for your device - twrp 3.1.1 recommended.
if you dont know how then let other people with same phone port it for your device
if you have successfully ported twrp, then follow guide below
method 1
(flash twrp recovery using sp flash tool)
goto recovery
back up your stock rom: system, boot, data, cache
full wipe device: dalvik/art cache. system, cache, data
restore your back up,
reboot system
reboot recovery
root with either supersu/magisk
if it doesnt work download unSu/magisk uninstaller flash it using twrp. flash the stock RECOVERY using sp flash tool then follow guide bellow.
method 2
download kingroot
you need internet connection because the app will download/update kingroot
root your device using kingroot
if successfully rooted, grab supersume from playstore or somewhere in the web
run supersume, this app will replace kingroot with supersu
reboot device
run supersume again to fully remove kingroot.
enjoy!
if this phone needs an unlocked bootloader then proceed below steps
tap on build number in about phone 5 times or more (this will reveal developers option)
enable usb debug
enable "oem unlock"
grab a laptop/desktop
download minimal adb and fastboot from here
connect your device
input the following one by one using adb&fastboot
adb devices
adb reboot bootloader <will reboot to bootloader>
fastboot oem unlock
*******from here you need to tap volume up or down depends on what the instruction says*******
note: if you are still using twrp then youll end up screwing your device. be sure to go back to stock recovery fist before unlocking.
if both methods failed
you can search here on xda on how to manually root your device.
NOTE: MY PHONE IS NOT INFINIX SMART, BUT THIS METHOD WORKS IN MOST MTK PHONES. IF THIS DOES NOT WORK FOR YOU THEN DONT GIVE ME NEGATIVE RESPONSE. EM JUST TRYING TO HELP.
PLS HIT THANKS IF I HELP YOU

Can you port miui 9 to infinix smart

??
Do you still want the root

Infinix x5010 ki custom rom Kab aye ge

Infinix smart 5 x657 twrp .. anyone to help me thanks

Sir please guide me to root infinix smart 6 x6511e , i have tried to root it before but in vain (resulted in boot dead)
Here is firmware link : https://firmwarefile.com/infinix-smart-6-x6511e

Androiduser065 said:
Sir please guide me to root infinix smart 6 x6511e , i have tried to root it before but in vain (resulted in boot dead)
Here is firmware link : https://firmwarefile.com/infinix-smart-6-x6511e
Click to expand...
Click to collapse
Which steps did you take
And how did it result to boot dead

mic_0 said:
Which steps did you take
And how did it result to boot dead
Click to expand...
Click to collapse
Now it's solved I had missed the step to disabling vbmeta verity resulted in boot loop. But now I have rooted it successfully

Androiduser065 said:
Now it's solved I had missed the step to disabling vbmeta verity resulted in boot loop. But now I have rooted it successfully
Click to expand...
Click to collapse
Nice
Enjoy

mic_0 said:
Nice
Enjoy
Click to expand...
Click to collapse
Hey can you guide me how to extract recovery of this device it is not available in firmware file. Other forums says it's in boot.img.

Androiduser065 said:
Hey can you guide me how to extract recovery of this device it is not available in firmware file. Other forums says it's in boot.img.
Click to expand...
Click to collapse
Here is boot img ---> https://forum.xda-developers.com/attachments/boot-img.5862409/

I believe you should create a new post/thread on this

Cant Flash Custom Recovery j710f

Hello everyone,ive issue about flashing custom recovery to my phone after i flash it to stock rom
Its android version is 8.1.0
Baseband version j710fxxu5brc3
Tnx

Lelouch? said:
Hello everyone,ive issue about flashing custom recovery to my phone after i flash it to stock rom
Its android version is 8.1.0
Baseband version j710fxxu5brc3
Tnx
Click to expand...
Click to collapse
you need to wipe the data partition after flashing it in twrp, then you can boot it

Also the error that im getting is recocery image check failed...sorry for late reply

michaeladige said:
you need to wipe the data partition after flashing it in twrp, then you can boot it
Click to expand...
Click to collapse
Do i have to do that at twrp recovery or at stock recovery?...sorry for noob question

Lelouch? said:
Do i have to do that at twrp recovery or at stock recovery?...sorry for noob question
Click to expand...
Click to collapse
twrp recovery

michaeladige said:
twrp recovery
Click to expand...
Click to collapse
Im still at stock recovery...how will i flash a twrp because when i flash it errors with recovery image check failed

Lelouch? said:
Im still at stock recovery...how will i flash a twrp because when i flash it errors with recovery image check failed
Click to expand...
Click to collapse
have you checked the OEM unlock option in the developer options in the settings??

Flash magisk and dont allow system r/w thats dm verify

michaeladige said:
have you checked the OEM unlock option in the developer options in the settings??
Click to expand...
Click to collapse
Yes

ORIGINALNAME123 said:
Flash magisk and dont allow system r/w thats dm verify
Click to expand...
Click to collapse
How can i flash it?

When i flash the magisk zip it errors with signature verification
When i try to root it or flash the patched magisk patched boot it errors with boot image signature check failed...
Sorry for late reply

Lelouch? said:
How can i flash it?
Click to expand...
Click to collapse
Look, i had this issue too i already said what to do.
1. Enable OEM unlock and USB debugging in developer settings
2. flash twrp (but don't boot into it)
3. boot up your phone to system
4. then boot to twrp and where it asks you to like enable system r/w or no select no
5. wipe data
6. from your laptop/pc move magisk.zip to phone
7. flash magisk
8. done

ORIGINALNAME123 said:
Look, i had this issue too i already said what to do.
1. Enable OEM unlock and USB debugging in developer settings
2. flash twrp (but don't boot into it)
3. boot up your phone to system
4. then boot to twrp and where it asks you to like enable system r/w or no select no
5. wipe data
6. from your laptop/pc move magisk.zip to phone
7. flash magisk
8. done
Click to expand...
Click to collapse
i flashed the twrp 3.2.3.0 after i boot up and boot to recovery it still the stock recovery

POCO F1 stuck on Oreo FIX

This is for POCO F1 users who have softbricked their phones and now stuck on Oreo. If they flash any other rom it will simply go to fastboot rather than booting. Just follow the below steps to fix yours.
Step 1 : Root your Oreo rom using magisk.
Step 2 : Boot into rom and install Lanthanum System toolbox
Step 3 : Open the app and give root privileges
Step 4 : Go to menu and scroll to partion settings
Step 5 : Scroll to dtbo
Step 6 : Click on it and select flash
Step 7 : Select the dtbo.img attached and flash it. ( If you get trouble while selecting or if it's crashing select from another file explorer.)
Step 8 : Reboot and then you can flash any rom like you used to.

Thanks a lot mate ! It Worked

bro im not able to install aex 8.0 A11 please help me

Fall3nSama3l said:
This is for POCO F1 users who have softbricked their phones and now stuck on Oreo. If they flash any other rom it will simply go to fastboot rather than booting. Just follow the below steps to fix yours.
Step 1 : Root your Oreo rom using magisk.
Step 2 : Boot into rom and install Lanthanum System toolbox
Step 3 : Open the app and give root privileges
Step 4 : Go to menu and scroll to partion settings
Step 5 : Scroll to dtbo
Step 6 : Click on it and select flash
Step 7 : Select the dtbo.img attached and flash it. ( If you get trouble while selecting or if it's crashing select from another file explorer.)
Step 8 : Reboot and then you can flash any rom like you used to.
Click to expand...
Click to collapse
thank you so much bro finally im able to install a custom rom . i installed dtbo.img by fastboot method

Babu4886 said:
thank you so much bro finally im able to install a custom rom . i installed dtbo.img by fastboot method
Click to expand...
Click to collapse
How?

rdjaat said:
How?
Click to expand...
Click to collapse
Just flash through fastboot command "fastboot flash dtbo dtbo.img" simple. You don't need to first flash Oreo rom or root device .I simply flashed it by fastboot and then installed twrp then flashed a custom rom corvus os 10.5

Babu4886 said:
Which firmware are u using
Click to expand...
Click to collapse

Corvus os

Babu4886 said:
Corvus os
Click to expand...
Click to collapse
bro i did the same my phone was stuck on permanent fastboot but when i try to flash miui 12.0.3 ofiicial through twrp or mi flash tool error comes which never did and i want to go to stock rom as i need to sell my phone

Previously my cellphone was in a custom ROM, I installed a module that used dtbo in it, while my cellphone didn't support it, finally my cellphone could live with the MIUI ROM
10 android 8(oreo), can I use the method above to use a custom rom again?

PanjiAja03 said:
Previously my cellphone was in a custom ROM, I installed a module that used dtbo in it, while my cellphone didn't support it, finally my cellphone could live with the MIUI ROM
10 android 8(oreo), can I use the method above to use a custom rom again?
Click to expand...
Click to collapse
https://t.me/poors_i_fone/165994 Here Download this dtbo.img
Download platform tools if using windows 7 or higher
open cmd
put phone in fastboot mode
type: 'fastboot flash dtbo dtbo.img'
this will fix everything... just reboot device
and make sure you dont end up flashing some trash files for your device... and fix this issue via edl or paying to xyz people. stay safe!

lakshhhhhh said:
https://t.me/poors_i_fone/165994 Here Download this dtbo.img
Download platform tools if using windows 7 or higher
open cmd
put phone in fastboot mode
type: 'fastboot flash dtbo dtbo.img'
this will fix everything... just reboot device
and make sure you dont end up flashing some trash files for your device... and fix this issue via edl or paying to xyz people. stay safe!
Click to expand...
Click to collapse
is it possible to flash the dtbo.img file after flashing the twrp and install the custom rom?

PanjiAja03 said:
is it possible to flash the dtbo.img file after flashing the twrp and install the custom rom?
Click to expand...
Click to collapse
bro is your phone stuck on fastboot completely?? dm me at telegram
𝗣𝗥𝗘𝗗𝗔𝗧𝗢𝗥 𝗢𝗦™ | 𝗣𝗢𝗖𝗢 𝗙1
💥PREDATOR OS = GAMING + BB💥 #POCO F1 (Beryllium) CUSTOM ROMS (MODS + PORT) Got Banned Join - @SorryIDidWrong Join Our Official Channel @predators_hotlist For Logs Join @logs_of_poors_i_fone
t.me

Infinix Hot 9 Play TWRP Recovery & ROOT

[AIO Guide] Bootloader unlocking, Root ,Twrp , Custom Rom & Stock Firmware]​ NOTE :unlocking bootloader wipe your data
Root at your own risk
I am not responsible for any data loss or brick
# Twrp recovery for hot 9 play
Device- Infinix Hot 9 play
Model & Variant :
1: X680B
2: X680F
3: X680
1.Bootloader Unlocking Guide:
1. Download & install ADB driver
2.Enable devloper mode by taping on Build verson(setting->my phone) then enable Oem Unlock & usb debugging from (settings->System->Devloper option)
3.Now connect device & open ADB path & run cmd
command: ADB devices
then reboot to bootloader
command: ADB reboot bootloader
4. unlock bootloader
command: fastboot flashing unlock the phone will ask to confirm
5. now reboot to system
command:fastboot reboot
If you are stuck waiting for the device screen
2.1 TWRP [Official]
https://forum.xda-developers.com/t/custom-recovery-infinix-hot-9.4462331/
3. Root:
## Root zip link: Magisk-v21.0.zip
## Unroot link : Magisk-uninstaller-20201003.zip
4. Orange state disabler:
Flashing guide & zip file
Click Wipe →Format Data → Yes → Press Enter.
Then Click Reboot → Recovery (Reboot to Recovery ).
After this, TWRP Recovery Mode will be installed on your phone
Link::Orange disabler.zip
5. Gsi Rom / Custom Rom Install guide & link:
https://forum.xda-developers.com/t/custom-rom-dynamic-partition-arm64-ab.4379341/
6. Phone Hard Brick fix / Flashing guide & tools :
https://forum.xda-developers.com/t/phone-soft-brick-phone-on-off-poblem-tecno-device.4378501/
6.1. Stock Firmware Files / Flash file
## Download link :
01 : X680B ( Variant ) :
X680B-H6215EFIJ-Q-OP-211130V265
X680B-H6215EFIJ-Q-OP-211015V263
X680B-H6215EFIJ-Q-OP-210804V255
X680B-H6215EFIJ-Q-OP-220215V277
02 : X680F ( Variant ) :
X680F-H6116P-Q-OP-210313V223
X680F-H6116P-Q-OP-200826V98
03 : X680 ( Variant ) :
X680-H6116DE-QGo-OP-200521V290
Hit Thanks If You Liked My Work

Thanks mate, my x680b was already rooted and I've been waiting for a custom recovery for almost a year. Searching on Google, Hovatech, and XDA time to time and finally yesterday I saw your post. The recovery works . Hopefully we'll see Android 12 for x680b too .

immi said:
Thanks.
Click to expand...
Click to collapse
gsi install gruide & link : page link
recommend:v400.e PixelExperience_arm64-ab-12.0-20211226-UNOFFICIAL

Parvej789 said:
gsi install gruide & link : page link
recommend:v400.e PixelExperience_arm64-ab-12.0-20211226-UNOFFICIAL
Click to expand...
Click to collapse
Thanks for more info but I think x680b is A only (not AB). Recommend a gsi that you've tested personally (if you have tested any)
EDIT: Also if you have any flashable to remove Orange State at boot would be a great favour.
EDIT 2: TWRP is unable to backup current rom or flash any .zip cause it can't access internal storage or mount partitions.

immi said:
Thanks
Click to expand...
Click to collapse
tested post
dynamic TWRP recovery fully does not work. Because your phone is super.img partition(System Product vendor not r w). any img file flash and buckup working. This phone ab system_root.
teble info.apk install-check this phone info.
Orange state disabler:
Flashing guide & zip file
Click Wipe →Format Data → Yes → Press Enter.
Then Click Reboot → Recovery (Reboot to Recovery ).
After this, TWRP Recovery Mode will be installed on your phone
Link:Orange disabler.zip
gapp Gsi install: PC to command (twrp flash not work Because system size is low)
Vanlina gsi install to twrp (An 12 gsi flash twrp. but twrp not boot )
this phone dynamic arm64 ab work (normal arm64 ab not work)
any problem to fastboot full flash stock ROM

Parvej789 said:
tested post
dynamic TWRP recovery fully does not work. Because your phone is super.img partition(System Product vendor not r w). any img file flash and buckup working. This phone ab system_root.
teble info.apk install-check this phone info.
Orange state disabler:
Flashing guide & zip file
Click Wipe →Format Data → Yes → Press Enter.
Then Click Reboot → Recovery (Reboot to Recovery ).
After this, TWRP Recovery Mode will be installed on your phone
Link:Orange disabler.zip
gapp Gsi install: PC to command (twrp flash not work Because system size is low)
Vanlina gsi install to twrp (An 12 gsi flash twrp. but twrp not boot )
this phone dynamic arm64 ab work (normal arm64 ab not work)
any problem to fastboot full flash stock ROM
flash but phone not on: When you turn on the phone, the phone shuts off in 2 to 5 seconds. Hold down the volume button on the bottom of the phone and press the power button, release the pressed button as soon as it is turned on. Witt phone on.
problem fixed: vendor img flash problem fixed
Click to expand...
Click to collapse
treble gsi comes in .img.xz extension, I don't know how to flash this on dynemic partition. if you can show me the way, please do it.

cmcd comannd installed succesfully...
when i use comand fastboot reboot recovery ,
error with unkonw reboot recovery...do have solution ..with other comand

charlis88 said:
cmcd comannd installed succesfully...
when i use comand fastboot reboot recovery ,
error with unkonw reboot recovery...do have solution ..with other comand
Click to expand...
Click to collapse
fastboot reboot & quickly Hold up volume button click phone .
boot to recovery

immi said:
treble gsi comes in .img.xz extension, I don't know how to flash this on dynemic partition. if you can show me the way, please do it.
Click to expand...
Click to collapse
img.xz uncompresing and gsi img rename to system.img.
vanlia gsi system.img to twrp flash
gapp gsi system img to cmd flash(https://forum.xda-developers.com/t/custom-rom-dynamic-partition-arm64-ab.4379341/ )

Parvej789 said:
fastboot reboot & quickly Hold up volume button click phone .
boot to recovery
Click to expand...
Click to collapse
I got it...thanks Mate....
Not bug work good like normaly...
thanks for you job DEV . . .

Custome recovery was ready....i hope in future will be release custome rom Base AOSP . . . .
Thanks
XDA and all Dev . . .God bless All you Job

charlis88 said:
Custome recovery was ready....i hope in future will be release custome rom Base AOSP . . . .
Thanks
XDA and all Dev . . .God bless All you Job
Click to expand...
Click to collapse
2. Gsi Rom / Custom from Install guide & link:
https://forum.xda-developers.com/t/custom-rom-dynamic-partition-arm64-ab.4379341/

my touchscreen dead in twrpmode
any solution?
thanks for your help

rihuym;ls said:
my touchscreen dead in twrpmode
any solution?
thanks for your help
Click to expand...
Click to collapse
Your phone build number

Parvej789 said:
Your phone build number
Click to expand...
Click to collapse
X680B-H6215EFIJ-Q-OP-211130V265

rihuym;ls said:
X680B-H6215EFIJ-Q-OP-211130V265
Click to expand...
Click to collapse
Otg to mouse used TWRP work

Parvej789 said:
Otg to mouse used TWRP work
Click to expand...
Click to collapse
Can you kindly explain that sir
Im beginner here

rihuym;ls said:
Can you kindly explain that sir
Im beginner here
Click to expand...
Click to collapse
I've tried that and not working,

Wait some time

rihuym;ls said:
I've tried that and not working,
Click to expand...
Click to collapse
Wait some time

Twrp For Tecno Spark 8 Pro (KG8) Root & Other Guide

[ AIO ] Guide TECNO SPARK 8 PRO (KG8) bootloader unlocking,root,twrp & stock firmware​## Device specifications
| Device: Tecno spark 8 pro
| Codename:KG8
| SoC: MediaTek Helio G85 (12nm)
| Memory: 4GB/6GB RAM
| Shipped Android version: 11
| Storage: 64/128GB
| Battey : Li-Po 5000 mAh, non-removable
| Build number: KG8-H698CDEFGH-R-GL
Note: Root at your own risk
I am not responsible for any data loss or brick
1. Bootloader Unlocking :
1. Download & install the ADB driver
2. boot unlock zip( Build number check and download )
2.Enable developer mode by taping on Build version(setting->my phone) then enable Oem Unlock & USB debugging from (settings->System->Devloper option)
3. boot unlock zip Extract.
4. Connect Mobile Withe Pc using Data Cable
5.boot unlock folder open & flash.bat click
6.cmd open tyep y and enter
7.phone boot into botloader
8.phone display command boot unlock yes / no
9. phone up volume click
10. phone unlock and phone on
Boot unlock Zip Link:
1.V622
2.V713
3.V722
If you are stuck waiting for the device screen
2. TWRP :https://forum.xda-developers.com/t/tecno-kg8-recovery.4477429/
3. Orange state disabler:
Flashing guide & zip file
Click Wipe →Format Data → Yes → Press Enter.
Then Click Reboot → Recovery (Reboot to Recovery ).
After this, TWRP Recovery Mode will be installed on your phone
Link:
4. Root
1.boot into recovery
2. Flash magisk .zip
llink:Magisk .25.zip
6. Gsi rom / Custom rom Installation guide:https://forum.xda-developers.com/t/custom-rom-installation-for-arm64-a-b-device-other-guide.4477513/
7. Phone Hard Brick fix
7.1. Flash file:
Link :
KG8-H698CDEFGH-R-GL-211217V622
HIT THE THANKS BUTTON IF ABOVE INFORMATION IS HELPFUL TO YOU

custom recovary tuch not work pls fixed it!!! stock farmware not flashing not work!! pls make a video flashing pixel experience rom

make a full video process in youtube

Parvej789 said:
[ AIO ] Guide TECNO SPARK 8 PRO (KG8) bootloader unlocking,root,twrp & stock firmware​## Device specifications
| Device: Tecno spark 8 pro
| Codename:KG8
| SoC: MediaTek Helio G85 (12nm)
| Memory: 4GB/6GB RAM
| Shipped Android version: 11
| Storage: 64/128GB
| Battey : Li-Po 5000 mAh, non-removable
| Build number: KG8-H698CDEFGH-R-GL
Note: Root at your own risk
I am not responsible for any data loss or brick
1. Bootloader Unlocking :
1. Download & install the ADB driver
2.Enable developer mode by taping on Build version(setting->my phone) then enable Oem Unlock & usb debugging from (settings->System->Devloper option)
3.Now connect device & open ADB path & run cmd:
command:
adb device
adb reboot bootloader
fastboot flashing unlock
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta_system.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta_vendor.img
fastboot flash boot boot.img
download link :
Your flash file to copy boot .img
vbmeta
If you are stuck waiting for the device screen
2. TWRP :https://forum.xda-developers.com/t/tecno-kg8-recovery.4477429/
3. Orange state disabler:
Flashing guide & zip file
Click Wipe →Format Data → Yes → Press Enter.
Then Click Reboot → Recovery (Reboot to Recovery ).
After this, TWRP Recovery Mode will be installed on your phone
Link:
4. Root
1.boot into recovery
2. Flash magisk .zip
llink:Magisk .25.zip
6. Gsi rom / Custom rom Installation guide:https://forum.xda-developers.com/t/custom-rom-installation-for-arm64-a-b-device-other-guide.4477513/
7. Phone Hard Brick fix
7.1. Flash file:
Link :
KG8-H698CDEFGH-R-GL-210927V249
HIT THE THANKS BUTTON IF ABOVE INFORMATION IS HELPFUL TO YOU
Click to expand...
Click to collapse

My phone is tecno spark 8 pro Kg8 and should i use my verison vb meta file?

Anik111 said:
custom recovary tuch not work pls fixed it!!! stock farmware not flashing not work!! pls make a video flashing pixel experience rom
Click to expand...
Click to collapse
Its working or not in TECNO SPARK 8 PRO KG8-GL

My phone is TECNO spark 8 pro kg8-Gl builder number /KG8-H698CDEFGH-R-GL-220620V722/ it will work in my mobile or not

Ibrahim200675 said:
Its working or not in TECNO SPARK 8 PRO KG8-GL
Click to expand...
Click to collapse
Ok bro
wait some time.

Ibrahim200675 said:
My phone is TECNO spark 8 pro kg8-Gl builder number /KG8-H698CDEFGH-R-GL-220620V722/ it will work in my mobile or not
Click to expand...
Click to collapse
will work.
Bro

Tell me a installation process only plz i cant understand

Tomorrow video uploaded.
Bro
Please wait

Ibrahim200675 said:
Tell me a installation process only plz i cant understand
Click to expand...
Click to collapse
Tomorrow video uploaded.
Bro
Please wait

Parvej789 said:
Tomorrow video uploaded.
Bro
Please wait
Click to expand...
Click to collapse
Ok

Did you make video please give me video link

PLEASE UPLOAD VIDEO OF HOW TO INSTALL TWRP

Where is installation process video people cant install please upload video

Make a video how to install

Where is youtube video hatefully dislike

Ibrahim200675 said:
Make a video how to install
Click to expand...
Click to collapse
Not due to busy work. Inshallah I will give it tomorrow

Parvej789 said:
Not due to busy work. Inshallah I will give it tomorrow
Click to expand...
Click to collapse
Give tomorrow full video iam waitinn from 3 days