How To Repair BootLoop in MicroMax Q382?
Phone Nor Enters In Download Or Recovery Mode
Help Plz??
you can flash firmware??
battery attched
KURISION said:
you can flash firmware??
Click to expand...
Click to collapse
Can U provide me a link to it. I tried everything but i cant flash it due to attached battery and can't even go to the download mode
OK
First go here:http://repairmymobile.in/flash/micromax-q382-stock-firmware/
And download all the things there,
Install drivers in your PC,
And start the flashing software as said by the post,
But just to start the flashing process start by pressing
Volume up+volume down simultaneously
And connect it to your PC
The process will start
I already did it 4or 5 times like this????????????????????
Related
Hey,
I have Samsung Galaxy Y Duos and i installed GingerIceJelly V2 on it. But after flashing it got stuck in the Samsung Galaxy y duos logo.
I can not boot into the ROM/recovery/download because it's stuck on the logo. So my question is, how can i save my phone?
I asked the same question in "Bricked your phone?" thread but it seems that no one knew the solution...
LocDog39 said:
Hey,
I have Samsung Galaxy Y Duos and i installed GingerIceJelly V2 on it. But after flashing it got stuck in the Samsung Galaxy y duos logo.
I can not boot into the ROM/recovery/download because it's stuck on the logo. So my question is, how can i save my phone?
I asked the same question in "Bricked your phone?" thread but it seems that no one knew the solution...
Click to expand...
Click to collapse
you can't do anything about it :crying:, just take it to the shop from where you bought it and tell them it's not working and wish they replace your phone and don't tell them that you have flashed a rom.
Okay thanks
Hey
I got that brick working again.. Just had to go to SD, remove the "_old" from "Boot_old.img" and then i could boot into recovery and download after which i used Odin and now everything is ok.
LocDog39 said:
Hey
I got that brick working again.. Just had to go to SD, remove the "_old" from "Boot_old.img" and then i could boot into recovery and download after which i used Odin and now everything is ok.
Click to expand...
Click to collapse
how do you did it coz i have the same problem i flashed gingericejelly and it is stuck in the logo .....how do you use odin??? plzzzzzzz
help coz i want to make it wor again
groundead said:
how do you did it coz i have the same problem i flashed gingericejelly and it is stuck in the logo .....how do you use odin??? plzzzzzzz
help coz i want to make it wor again
Click to expand...
Click to collapse
http://androidlegend.com/update-samsung-galaxy-y-duos-s6102-with-gingerbread-2-3-6-ddld4/ follow this link
groundead said:
how do you did it coz i have the same problem i flashed gingericejelly and it is stuck in the logo .....how do you use odin??? plzzzzzzz
help coz i want to make it wor again
Click to expand...
Click to collapse
Using odin is not complex .. Its simple ..But you have to take attention... Anytng wrong can make your phone a priceless paperweight.
Requirements
1. PC with windows os.
2. Installed samsung usb driver.
3. Odin for your phone.
3. Odin flashable stock firmware.
Steps
1. Get your phone into odin mode by pressing vol down+power+home keys simultaneously. Then a menu will come. Press vol up to get into odin mode..
2.connect your phone to ur pc by usb..
3.unzip odin and run odin.
4.In odin if there is a colour change (yellow or blue) in left top end (it will be written "com:xx" inside colourd box) your device is ready for flashing.
5.ensure that there is no tick on partition.
6.now unzip stock rom. Possible u will have only one file. Click on PDA and select that file. Now press start.
7. Dont do anything .. Wait patiently . Dont plugg out your phone from usb untill "pass" will come on the top left end.
By these steps ..you can work on odin...
Sent from my GT-S6102 using xda app-developers app
rahulsnair said:
Using odin is not complex .. Its simple ..But you have to take attention... Anytng wrong can make your phone a priceless paperweight.
Requirements
1. PC with windows os.
2. Installed samsung usb driver.
3. Odin for your phone.
3. Odin flashable stock firmware.
Steps
1. Get your phone into odin mode by pressing vol down+power+home keys simultaneously. Then a menu will come. Press vol up to get into odin mode..
2.connect your phone to ur pc by usb..
3.unzip odin and run odin.
4.In odin if there is a colour change (yellow or blue) in left top end (it will be written "com:xx" inside colourd box) your device is ready for flashing.
5.ensure that there is no tick on partition.
6.now unzip stock rom. Possible u will have only one file. Click on PDA and select that file. Now press start.
7. Dont do anything .. Wait patiently . Dont plugg out your phone from usb untill "pass" will come on the top left end.
By these steps ..you can work on odin...
Sent from my GT-S6102 using xda app-developers app
Click to expand...
Click to collapse
Tried and works! THANKS MAN!
my galaxy y duos is dead, it was not rebooting and goes only to downloading mode. i try flash with the custom rom but still it doesnt booting .
plzz help me
rahulsnair said:
Using odin is not complex .. Its simple ..But you have to take attention... Anytng wrong can make your phone a priceless paperweight.
Requirements
1. PC with windows os.
2. Installed samsung usb driver.
3. Odin for your phone.
3. Odin flashable stock firmware.
Steps
1. Get your phone into odin mode by pressing vol down+power+home keys simultaneously. Then a menu will come. Press vol up to get into odin mode..
2.connect your phone to ur pc by usb..
3.unzip odin and run odin.
4.In odin if there is a colour change (yellow or blue) in left top end (it will be written "com:xx" inside colourd box) your device is ready for flashing.
5.ensure that there is no tick on partition.
6.now unzip stock rom. Possible u will have only one file. Click on PDA and select that file. Now press start.
7. Dont do anything .. Wait patiently . Dont plugg out your phone from usb untill "pass" will come on the top left end.
By these steps ..you can work on odin...
Sent from my GT-S6102 using xda app-developers app
Click to expand...
Click to collapse
i tried these thing that you say ..but my samsung galaxy y duos is still stuck at logo ...in recovery mode
" --appling Muti-csc --
E : failed to mount /system (invalid argument)
E : failed to mount /system (invalid argument ) " is written ..what can i do ..please tell me ..
my phone is stuck (boot LOGO) , after flasing !
hey ,,
can anyone sort this out for me ..please !
tried flashing new rom Boyzz v2.0(http://forum.xda-developers.com/showthread.php?t=2507406) via CMW recovery.., tried flasinh the same rom twice , will it work if flash my stock rom ???
tried clearing everything on my SD card , formatted n tried flashing it again .
n when i charge after switching off ..a circle comes inside that battery logo instead of that green stuff .
i can boot into recovery mode after i remove the battery and reinsert it again .
w
Yes!!!!!!!!! Flash/Unbrick Your Xolo A700
(PLEASE FOLLOW INSTRUCTIONS CAREFULLY,I AM NOT RESPONSIBLE IF YOU TURN IT INTO A PAPERWEIGHT)
Firstly Download Firmware And Tools From This Link
Things Needed
Bricked Xolo A700
Usb Cable
Windows Pc
And A Calm Head
Instructions
Click Here For Youtube Tutorial
Remove Battery From Your Phone And Re-insert It
Connect Your Phone To Pc With Usb Cable
Your PC Will Prompt You To Install The Usb Drivers
Go To-Device Manager>Ports>MTK 65xx Preloader
And Do A Right Click On It>Update Driver>Browse My Computer For Driver(Something Like That)
Select The Driver Folder Where You've Extracted All The Files From The ZIP And Follow The Setup
After Installing Remove Your Phone From PC
Remove And Re-Insert The Battery
Open SP Flash Tool
Click On Scatter Loading
Navigate To The Folder Where You've Extracted The Stock Rom Folder
Select MT6577 Scatter .txt
Click On Download Button>Click On Yes
Connect Your Phone And Wait Till The Process Is Complete
Voila!!!!!!!!!!!!!!!!!!!!!!!!!!
You.................Yes You've Done It
For Those Who Are Facing Black Screen After Flashing
Hit Format-Download Button Instead Of Pressing Download
And Everything Will Be FIne:highfive::highfive:
Need Help
I am getting a continuous restart after the logo appears, I think I have deleted the recovery as it does not goes into recovery also, keeps on restarting, let me know if this method will help me to unbrick my device..
safetydell said:
I am getting a continuous restart after the logo appears, I think I have deleted the recovery as it does not goes into recovery also, keeps on restarting, let me know if this method will help me to unbrick my device..
Click to expand...
Click to collapse
ys you can recover it with help of the above tut
yasirmujtaba said:
ys you can recover it with help of the above tut
Click to expand...
Click to collapse
Thanks, I am out of station as of now, will go home by Saturday, I will surely try this method, hope it helps me to recover my device..
The download link to "firmware and Tools " is not working.
Edit: It is Working now.
Help Needed
yasirmujtaba said:
ys you can recover it with help of the above tut
Click to expand...
Click to collapse
No Luck dude, I did the same as you said but after everything it showed download complete and I started my phone, it came to logo " XOLO " and after that blank screen waited a lot but still the same blank screen, any help from you pls...
sorry for replying late
then you can hit format-download in sp flash tool
it will work for sure
Sent from my Xolo A700 using xda premium
yasirmujtaba said:
sorry for replying late
then you can hit format-download in sp flash tool
it will work for sure
Sent from my Xolo A700 using xda premium
Click to expand...
Click to collapse
Thanks everything went well and was able to get the recovery back but not the stock, booted in CWM recovery and installed your xtrance rom as i was not able to boot the stock rom, it was idle in the boot and was not booting also, anyways thanks now now device is unbricked..
safetydell said:
Thanks everything went well and was able to get the recovery back but not the stock, booted in CWM recovery and installed your xtrance rom as i was not able to boot the stock rom, it was idle in the boot and was not booting also, anyways thanks now now device is unbricked..
Click to expand...
Click to collapse
which option you chose for format I chose "Automatic and format whole flash except bootloader and nav bin something"
it goes dead not even XOLO logo but when chose download it shows xolo logo and then blank
need urgent help
i formatted entiree flash and now sp tool doesnt detect my phone. please help me out.
Install the drivers agin and use diff usb cable
Sent from my IQ446 Magic using xda premium
actually now the phone is not recognized as a phone. but unknown device by the computer. the computer doesnt accept the ini files as drivers saying unknown driver. i m in a pickle now. i tried changing the usb cable still nothing. i think my preloader is also formatted. can u help me in flashing the preloader back?
Didn't try FORMAT
I used the tools to unbrick my xolo a700 struck at bootloop. But no luck. its still the same. WHAT DO U SUGGEST???
Struck at XOLO logo after XOLO animation
I given factory Reset and the bricked.
I tried the procedure after that my xolo mobile struck at XOLO logo after XOLO animation...
Please help....!!!
guys please help us by posting some tried and tested step by step procedure. My Xolo A700s is stuck on boot loop. even i flashed original rom . but dont know what to do with the update file provided along with the rom. guys help
jash2711 said:
actually now the phone is not recognized as a phone. but unknown device by the computer. the computer doesnt accept the ini files as drivers saying unknown driver. i m in a pickle now. i tried changing the usb cable still nothing. i think my preloader is also formatted. can u help me in flashing the preloader back?
Click to expand...
Click to collapse
What did you do? I think I have a similar issue with my tablet, a Pixi 8079.
hello..i am using CYNUS T2 for 5 months now..jelybean...before few day i tried to downgrade to ICS because is faster and work very well with 2 sim..but something has gone wrong and my phone doesnt open...stuck at boot screen..i tried to enter factory or recovery mode with (power button + vol up+ vol down) but nothing happens... i try it several times...any solution dudes..thanks in advance.
First of all...you are in wrong section dude..you must have post this in Q&A section..
Now search in General section & flash stock jellybeen through sptools..as you are unable to go in recovery
Sent from my A250 LegoIce™_Turbo using XDA Premium 4 mobile app
@ Justmpm please move this thread
Use SP flash tools and reinstall recovery.
al13nas said:
hello..i am using CYNUS T2 for 5 months now..jelybean...before few day i tried to downgrade to ICS because is faster and work very well with 2 sim..but something has gone wrong and my phone doesnt open...stuck at boot screen..i tried to enter factory or recovery mode with (power button + vol up+ vol down) but nothing happens... i try it several times...any solution dudes..thanks in advance.
Click to expand...
Click to collapse
Use Flash Recovery tools and re install CWM recovery. If you are stuck at boot logo that is the only option. Type how to install CWM mode with SP Flash tools in google.com. For that you have to remove your battery And Flash CWM recovery.
Once the Recovery is open You can install any custom ROM==> Again "Google knows"
This gotta help you, So you gotta hit thanks.If not reply your problem
shreyasmakde said:
Use Flash Recovery tools and re install CWM recovery. If you are stuck at boot logo that is the only option. Type how to install CWM mode with SP Flash tools in google.com. For that you have to remove your battery And Flash CWM recovery.
Once the Recovery is open You can install any custom ROM==> Again "Google knows"
This gotta help you, So you gotta hit thanks.If not reply your problem
Click to expand...
Click to collapse
i open flashtool.. so i need to open a scatter file from original rom ... but flashtool (error : initialazing scatter file failed ..its illegal)
I rooted my galaxy grand win.. and installed transwin rom. But when I try to connect my phone to pc it's only charging and not able to transfer any data.. and it's not connecting to odin also.. when tried to flash another rom I got stuck in cwm recovery mode for almost 5 days..I searched on Google I found that using stock flash file I can come out of cwm.. so I booted into stock mode using "stock flash zip file" via install zip .. . Now I m not able to boot into cwm recovery mode.. please Help me to connect my phone to pc. And to boot into cwm recovery. Thanks in advance.. rom manager also not helping..now I installed stock rom which I have backed up before.. but still not able to connect with my pc...
Please Help me to boot in cwm recovery and to connect with odin.. ..
Sagar Kininge said:
I rooted my galaxy grand win.. and installed transwin rom. But when I try to connect my phone to pc it's only charging and not able to transfer any data.. and it's not connecting to odin also.. when tried to flash another rom I got stuck in cwm recovery mode for almost 5 days..I searched on Google I found that using stock flash file I can come out of cwm.. so I booted into stock mode using "stock flash zip file" via install zip .. . Now I m not able to boot into cwm recovery mode.. please Help me to connect my phone to pc. And to boot into cwm recovery. Thanks in advance.. rom manager also not helping..now I installed stock rom which I have backed up before.. but still not able to connect with my pc...
Please Help me to boot in cwm recovery and to connect with odin.. ..
Click to expand...
Click to collapse
Turn off your phone and then boot to Download Mode (to do that, press Power, Volume Down and Home button at the same time). If you have your phone's drivers installed on your PC then Odin should recognize your phone. Now go to samsung-updates.com and download your phone's firmware. The link I gave is for GT-I8552 - which I'm assuming is your phone's model number. Once it downloads, flash it using Odin.
Looks like MtpApplication.apk is missing on your phone. That's why you probably can't transfer any files. Either this or something might be wrong with your phone's micro USB port or your USB cable.
You can watch some tutorial videos on YouTube for more info. Good luck!
thanks for reply..
thank u very much for reply...
i solved that problem but now m facing one more problem, on my galaxy grand win 8552 i reinstalled TWRP and after reboot my phone not starting only.. totally dead.. no vibration,no light on pressing of any key.. only when i connect it to my laptop it says unkwn device(beeps like something is connected to pc) even phone is in dead condition.... actually i was running on cwm after directly i installed twrp and after finishing i selected reboot and after that nothing happened and phone not starting only.. no charging logo also.. today i just downloaded stock rom.. nw plzz tell me how to install stock rom..is there any way to flash stock rom?????? i cant enter into cwm ..
plz hel...
thanks for reply..
thank u very much for reply...
i solved that problem but now m facing one more problem, on my galaxy grand win 8552 i reinstalled TWRP and after reboot my phone not starting only.. totally dead.. no vibration,no light on pressing of any key.. only when i connect it to my laptop it says unkwn device(beeps like something is connected to pc) even phone is in dead condition.... actually i was running on cwm after directly i installed twrp and after finishing i selected reboot and after that nothing happened and phone not starting only.. no charging logo also.. today i just downloaded stock rom.. nw plzz tell me how to install stock rom..is there any way to flash stock rom?????? i cant enter into cwm ..
plz help...
Sagar Kininge said:
thank u very much for reply...
i solved that problem but now m facing one more problem, on my galaxy grand win 8552 i reinstalled TWRP and after reboot my phone not starting only.. totally dead.. no vibration,no light on pressing of any key.. only when i connect it to my laptop it says unkwn device(beeps like something is connected to pc) even phone is in dead condition.... actually i was running on cwm after directly i installed twrp and after finishing i selected reboot and after that nothing happened and phone not starting only.. no charging logo also.. today i just downloaded stock rom.. nw plzz tell me how to install stock rom..is there any way to flash stock rom?????? i cant enter into cwm ..
plz help...
Click to expand...
Click to collapse
Looks like you bricked your phone. Are you sure that the TWRP you installed is for your phone? Because this usually happens when you install something that was not made for your phone.
Try to do what I said earlier. Boot to Download Mode. And using Odin flash your phone's firmware. If the damage is not severe then by doing this it should fix your phone. If the damage is severe then perhaps your phone is permanently bricked.
can i install rom through sp tool.. i tried it also but it asking scatter file.. i dont have scatter file of galaxy grand win 8552.. if u have then plz give me its link.. thats my last hope to bring my cell to file..
and that TWEP i installed was not for my cell.. i installed it by mistakly..
plz plz help..
I feel you can try connecting your phone again to odin and flashing a custom recovery made for your phone. That's all of your hopes left if it is not bricked. Pray to god.
Sent from my GT-I9300 using XDA Free mobile app
you need a driver from samsung. The connect thru adb command.
cibalo said:
you need a driver from samsung. The connect thru adb command.
Click to expand...
Click to collapse
i fixed that problem with nearest repair shop.. he said my root file were deleted.. he repaired my phone but before doing that all my phone internal memory was 5.10gb now it became 1.5gb, when i asked him,he said that was necessory because some of your storage got damaged due to flashing wrong recovery(done by me).... so i want to know whatever he said is right???? if yes then is there any possibilities to repair my damaged storage part.....
thanks XDA developers to for answering my all questions thanks a lot ..
i Rooted my samsung s duos 2 with Kingoroot and then flashed with Rashr flashing app. Then i rebooted it in recovery mode but now it has got stuck on samsung logo screen and unable to go in recovery mode or download mode please help . :crying::crying::crying::crying::crying::crying::crying:
I am unable to enter recovery mode and not able to start up my device also . The screen got stuck on Samsung logo . please any one help
Same problem!! Don't know when I'll get the solution...
defyreborn said:
i Rooted my samsung s duos 2 with Kingoroot and then flashed with Rashr flashing app. Then i rebooted it in recovery mode but now it has got stuck on samsung logo screen and unable to go in recovery mode or download mode please help . :crying::crying::crying::crying::crying::crying::crying:
I am unable to enter recovery mode and not able to start up my device also . The screen got stuck on Samsung logo . please any one help
Click to expand...
Click to collapse
Same problem brother.. If you get any solution then please do post or text me +919668450825 WA
Download odin and firmware from Google, put i in your computer, turn off your phone go to download mode(press power button,home key and volume down key simultaneously)
Open Odin on computer select PIT/AP and locate firmware you just downloaded connect your phone through usb when it show [com 6 ] or something like that then press start, leave it till process complete, it will reboot in between the process, dont panic just wait till it say ok.....turn it on injoy
Vishal Shrivastav said:
Download odin and firmware from Google, put i in your computer, turn off your phone go to download mode(press power button,home key and volume down key simultaneously)
Open Odin on computer select PIT/AP and locate firmware you just downloaded connect your phone through usb when it show [com 6 ] or something like that then press start, leave it till process complete, it will reboot in between the process, dont panic just wait till it say ok.....turn it on injoy
Click to expand...
Click to collapse
will this erase all the data on the phone?
aquabigo said:
will this erase all the data on the phone?
Click to expand...
Click to collapse
No