-----------Flashing Rom Is In Your Own Risk-----------
Rom features:-
*G901FXXS1CQC1 Base.
*Deodexed.
*Knox stuff is removed.
*Stock Kernel included.
*Debloated some apps which can be downloaded from Playstore.
*C5 Keyboard.
*Mix Apps Stock & S7 & N7.
*S8 Sounds & Wallpapers & Touchwiz.
*DreamUX Theme UI.
*March Security Patches.
Installation:-
1. Download the rom and put it on your external SD card.
2. Reboot to recovery.
3. Now wipe Dalvik, System, Data, Cache.
4. Install the rom.
5. Install your variant Patch G906L/K/S.
6. Reboot and wait for 10 minutes+.
7. Enjoy the new version
Downloads:-
*ROM:
https://drive.google.com/file/d/0B3xtVwHkmfxzcUdaQ3Zod0VCY1k/view?usp=sharing
*UPDATED_G906K/S Patch:
https://drive.google.com/file/d/0B3xtVwHkmfxzUDFvRFRnb2lzSXM/view?usp=sharing
https://drive.google.com/file/d/0B3xtVwHkmfxzYjBUQkFCeXp2aTA/view?usp=sharing
*DreamUX SystemUI:
https://drive.google.com/file/d/0B3xtVwHkmfxzNlJWYTFSZkpxcmc/view?usp=sharing
Bugs:-
Credits:-
*Samsung for the Source
*Chainfire for the root access
*Kykint for porting guide
*tavatien86
*supergrobi94
Kindly hit thanks if you like this Rom here
I'm just a Noob V3 :laugh::victory:
XDA:DevDB Information
StockRom Port for lentils, ROM for the Samsung Galaxy S 5 Korean LTE-A, ROM for the Samsung Galaxy S5
Contributors
kardinal969
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP Recovery & 6.0.1 CPLx Bootloader
Based On: Touchwiz
Version Information
Status: Stable
Current Stable Version: V3
Stable Release Date: 2017-04-11
Created 2016-05-24
Last Updated 2017-04-11
any screen shot ? Thanks u mate
hait.handle said:
any screen shot ? Thanks u mate
Click to expand...
Click to collapse
@hait.handle
Dear,
click on Discussion tab, then screenshot tab will appear click on it.
Cheers for the effort, but I can't get the rom to boot on my g906s. When I tried to flash the rom, everything seemed fine in TWRP. But, when I flashed the patch right after, TWRP threw a status 7 error. I pulled the battery and wiped art, cache, system, and data. Then, I flashed the rom again to see if it would boot without the patch. My phone bootlooped (as I expected). I pulled the battery again and flashed the patch. This time the patch installed without TWRP error, but my phone just bootlooped on reboot. Just in case, I wiped art and cache, but my phone still just boots to the Samsung label, then reboots - rinse and repeat.
I'm going to let my phone cool down and go back to plain stock.
bud7dha said:
Cheers for the effort, but I can't get the rom to boot on my g906s. When I tried to flash the rom, everything seemed fine in TWRP. But, when I flashed the patch right after, TWRP threw a status 7 error. I pulled the battery and wiped art, cache, system, and data. Then, I flashed the rom again to see if it would boot without the patch. My phone bootlooped (as I expected). I pulled the battery again and flashed the patch. This time the patch installed without TWRP error, but my phone just bootlooped on reboot. Just in case, I wiped art and cache, but my phone still just boots to the Samsung label, then reboots - rinse and repeat.
I'm going to let my phone cool down and go back to plain stock.
Click to expand...
Click to collapse
flash rom then reboot again to recovery and flash patch . but not boot , i'm flash bootloader MM , flash twrp 3.0.2 for callmesuper , flash patch for super , rom booting done . Wifi not work ... now wait to stable version
kotobodj said:
flash rom then reboot again to recovery and flash patch . but not boot , i'm flash bootloader MM , flash twrp 3.0.2 for callmesuper , flash patch for super , rom booting done . Wifi not work ... now wait to stable version
Click to expand...
Click to collapse
I'm fine with stock for now unless a stable aosp type rom becomes available.
bud7dha said:
Cheers for the effort, but I can't get the rom to boot on my g906s. When I tried to flash the rom, everything seemed fine in TWRP. But, when I flashed the patch right after, TWRP threw a status 7 error. I pulled the battery and wiped art, cache, system, and data. Then, I flashed the rom again to see if it would boot without the patch. My phone bootlooped (as I expected). I pulled the battery again and flashed the patch. This time the patch installed without TWRP error, but my phone just bootlooped on reboot. Just in case, I wiped art and cache, but my phone still just boots to the Samsung label, then reboots - rinse and repeat.
I'm going to let my phone cool down and go back to plain stock.
Click to expand...
Click to collapse
@bud7dha @kotobodj
Thanks for your kind word. I will be checking the patch again by myself.
Did you flashed callmesuper TWRP before by any chance because he used old 5.0 bootloader if not then I will checking it out.
If you get error in TWRP just reboot recovery and try to flash again.
I will upload Bootloaders and Modems if anyone needs it.
kardinal969 said:
@bud7dha @kotobodj
Thanks for your kind word. I will be checking the patch again by myself.
Did you flashed callmesuper TWRP before by any chance because he used old 5.0 bootloader if not then I will checking it out.
If you get error in TWRP just reboot recovery and try to flash again.
I will upload Bootloaders and Modems if anyone needs it.
Click to expand...
Click to collapse
I used @kykint's TWRP, but some users are reporting that it won't flash a rom.
bud7dha said:
I used @kykint's TWRP, but some users are reporting that it won't flash a rom.
Click to expand...
Click to collapse
I checked the Patch by myself and saw status 7 error.
What I can advise is the following as you said you flashed Kykint TWRP only so no problems in bootloader.
Now, same procedure but after flashing rom,, Reboot recovery and then flash patch.. Also wipe Cache, Dalvic..
Unfortunately I have G906L and cant test if K/S will boot but it should.
Note: The phone will reboot it self twice after flashing rom due to supersu just be patient.
kardinal969 said:
I checked the Patch by myself and saw status 7 error.
What I can advise is the following as you said you flashed Kykint TWRP only so no problems in bootloader.
Now, same procedure but after flashing rom,, Reboot recovery and then flash patch.. Also wipe Cache, Dalvic..
Unfortunately I have G906L and cant test if K/S will boot but it should.
Note: The phone will reboot it self twice after flashing rom due to supersu just be patient.
Click to expand...
Click to collapse
I tried what you suggested, and the phone kept bootlooping. I'm back on stock with all its 320+ apps, which I managed to debloat to 180 or so. Wish I could have taken a log in TWRP but I had to yank the battery so I could reflash stock with odin. (TWRP may be at fault and not the patch, but I lack the skills to dig deeper.)
A bit off-topic, after I flashed stock through odin, supersu and busybox apps still appeared in my apps drawer - though not working - and the first menu upon boot popped up in Dutch. Anyway, thanks for your efforts; hopefully, others have better luck and/or more constructive feedback.
bud7dha said:
I tried what you suggested, and the phone kept bootlooping. I'm back on stock with all its 320+ apps, which I managed to debloat to 180 or so. Wish I could have taken a log in TWRP but I had to yank the battery so I could reflash stock with odin. (TWRP may be at fault and not the patch, but I lack the skills to dig deeper.)
A bit off-topic, after I flashed stock through odin, supersu and busybox apps still appeared in my apps drawer - though not working - and the first menu upon boot popped up in Dutch. Anyway, thanks for your efforts; hopefully, others have better luck and/or more constructive feedback.
Click to expand...
Click to collapse
Problem noted and Patch fixed and being uploaded.
About off-topic, you need to reboot to recovery if using stock recovery and perform factory reset but beware all internal storage will be wiped.
Note: You dont need to remove battery always just use power button + volume down
Patch UPDATED and Fixed
Patch has been updated and fixed for G906K/S Variant.
Kindly feedback if any further issues.
kotobodj said:
flash rom then reboot again to recovery and flash patch . but not boot , i'm flash bootloader MM , flash twrp 3.0.2 for callmesuper , flash patch for super , rom booting done . Wifi not work ... now wait to stable version
Click to expand...
Click to collapse
You have to flash MM Bootloader again, Use TWRP from Kykint and then Flash this Rom from beginning same steps i wrote.
If you dont have MM Bootloader i can help.
What G906 You have L or K or S ?
kardinal969 said:
You have to flash MM Bootloader again, Use TWRP from Kykint and then Flash this Rom from beginning same steps i wrote.
If you dont have MM Bootloader i can help.
What G906 You have L or K or S ?
Click to expand...
Click to collapse
my phone is G906S . now i'm on stock . more stable with me.
kardinal969 said:
You have to flash MM Bootloader again, Use TWRP from Kykint and then Flash this Rom from beginning same steps i wrote.
If you dont have MM Bootloader i can help.
What G906 You have L or K or S ?
Click to expand...
Click to collapse
I need bootloader MM g906s.please help me
rm-223_bp said:
I need bootloader MM g906s.please help me
Click to expand...
Click to collapse
Hi dear,
this is the link for Bootloader
https://drive.google.com/open?id=0B3xtVwHkmfxzdy1CSGVlcnNnTTA
Seem private mode error ?
COOL
Thanks man. It is the coolest rom with very excellent battery time. I have used many other roms for g906s even the stock but all of them heatup the phone.
And no i wont call you a noob. You did an excellent work here.
CHEERS your rom is cool in this respect.:good::good::good::good::good::good:
---------- Post added at 02:53 PM ---------- Previous post was at 02:48 PM ----------
Fingerprint sensor is working but when after booting ask for the backup password. After inputing backup password fingerprint start to work again.
me
Can i install xposed for G906S?
rm-223_bp said:
Seem private mode error ��
Click to expand...
Click to collapse
I don't use private mode but I will take a look at it.
Kindly please Pm (Personal Message) me and I can guide you step by step
fawadshah33 said:
Thanks man. It is the coolest rom with very excellent battery time. I have used many other roms for g906s even the stock but all of them heatup the phone.
And no i wont call you a noob. You did an excellent work here.
CHEERS your rom is cool in this respect.:good::good::good::good::good::good:
---------- Post added at 02:53 PM ---------- Previous post was at 02:48 PM ----------
Fingerprint sensor is working but when after booting ask for the backup password. After inputing backup password fingerprint start to work again.
me
Click to expand...
Click to collapse
Thanks dear for your kind words, I will look into it soon. Thanks for the feedback
lvd0392 said:
Can i install xposed for G906S?
Click to expand...
Click to collapse
No you cant because this Stock Rom is Odex.
For xposed you need Deodex Rom
Related
Hi,
XT1039: bootloader unlocked, rooted, stock rom 4.4.4
TO: nightly
Flashed 4118 bootloader, as detailed in http://forum.xda-developers.com/moto...tions-t2996087
It was successful.
Followed https://wiki.cyanogenmod.org/w/Install_CM_for_peregrine
unlocked bootloader
installed cm-recovery from here: https://download.cyanogenmod.org/?type=nightly&device=peregrine
tried to flash cm, got a bootloader error,
followed this guide: http://forum.xda-developers.com/showpost.php?p=59520890&postcount=233
Now using bootloader 411A
flashed cm-13.0-20160121-NIGHTLY-peregrine.zip
from here: https://download.cyanogenmod.org/?type=nightly&device=peregrine
now the phone is stuck at the boot screen.
So I flashed twrp recovery, successful and reflashed cm-13.0-20160121-NIGHTLY-peregrine.zip
I tried several different guides that included all sorts of cache deletion and format orders but the result is still the same
(I am not using an sdcard but only the internal storage.)
After rebooting, the phone is stuck on the Cyanogenmod boot icon (blinking cat face) since past half hour.
Please guide how to debug/recover.
fastboot and recovery are working
Thanks,
[edit:]
The cm-13.0-20160121-NIGHTLY-peregrine.zip was transferred by mounting the internal storage on the PC and copying it manually. Just in case this matters
Hi,
Try to flash stock rom from here : http://forum.xda-developers.com/moto-g/4g-development/rom-stock-motorola-4g-lollipop-rom-t3142816
satanas17 said:
Hi,
Try to flash stock rom from here : http://forum.xda-developers.com/moto-g/4g-development/rom-stock-motorola-4g-lollipop-rom-t3142816
Click to expand...
Click to collapse
Thanks for the reply, but the goal is to get cyanogenmod on my phone. How does the stock rom help me with that??
Just for testing, I have installed the stock rom to see if it works and it does. I now have a Motorola Android 5.1 on my phone. But thats not what I wanted.
Anyone having any idea how to make cyanogenmod work?
karstenme said:
Thanks for the reply, but the goal is to get cyanogenmod on my phone. How does the stock rom help me with that??
Click to expand...
Click to collapse
Just to restoring a kernel on it...after restoring one, go to TWRP, make your wipes and flash again your CM
satanas17 said:
Just to restoring a kernel on it...after restoring one, go to TWRP, make your wipes and flash again your CM
Click to expand...
Click to collapse
WOW Thank you very much, its working
Maybe you can also explain to my why installing the custom rom mattered, since I wiped everything before installing cm again, I would assume there is nothing of the stock rom left on the device.
karstenme said:
WOW Thank you very much, its working
Click to expand...
Click to collapse
U're welcome
karstenme said:
Maybe you can also explain to my why installing the custom rom mattered, since I wiped everything before installing cm again, I would assume there is nothing of the stock rom left on the device.
Click to expand...
Click to collapse
Not really able to explain...sometimes sh*t happens...
But this procedure works almost every time.
Surely due to your bootloader error after your first flash with CM recovery...something was broken...
Most important, now, it's working...Enjoy
I install cm but google play is not working and sallular data also not working.. Plz any one help me please..
Hello Guys i recently i found an official supported rom for hima ul on mokee webiste would like to share it here.The rom is based on android 7.1.2 It is fully stable and can be used as a daily driver
UPDATE: 2017-5-1
Rom has been updated to nougat
Download
IF YOU HAVE STATUS 6 OR 7 ERROR IN TWRP NOTE: open the downloaded rom zip and open the following file located in
x.zip/META-INF/com/google/android/update-script
and remove the following line to avoid errors in TWRP
"Assert(hima.verify_sbl1("1.2.50.1.36") == "1");"
happy flashing :good:
I tried this rom and loved it. But after some weeks my phone only show black screen and does not reboot. Don't know if mokee causes the failure. Or if it was a hardware issue. I think the second.
I got a brandnew m9 phone and use another nougat rom.
And yes. Mokee 60.1 is Android 6 and cam works.
mega_man said:
Hello Guys i recently i found an official supported rom for hima ul on mokee webiste would like to share it here.The rom is based on android 6.0 source so i guess the camera is working
Download
Please test it out and share screenshots of it thanks
Click to expand...
Click to collapse
MoKee is one great rom,i was using it and it is sooo stable and u can always count on updates regulary,when i get born of sense,i use this rom.
Nice that here on XDA is a mokee thread in m9 section. The rom deserves its own thread.
please share some screenshots of the rom so i can update the thread @dsg2003 @Boskoel03
So it's marshmallow?
rjcreations said:
So it's marshmallow?
Click to expand...
Click to collapse
yes marshmallow full stable with working camera
dsg2003 said:
Nice that here on XDA is a mokee thread in m9 section. The rom deserves its own thread.
Click to expand...
Click to collapse
I was using it,not now,so i can not help u at the momment... U have it all,and all the rest info about the rom on their G+ page...
Same here. I used it some time ago. So I cannot show screenshots.
Give it a try. Make a nandroid backup before, so you can switch back easily, if you don't like mokee.
Advice for you: I had to make changes in updater script before flashing. Without that, twrp gets error by me. Look in Slim7 Rom thread. There is described how to change updater script. You have to delete some words in it.
dsg2003 said:
Same here. I used it some time ago. So I cannot show screenshots.
Give it a try. Make a nandroid backup before, so you can switch back easily, if you don't like mokee.
Advice for you: I had to make changes in updater script before flashing. Without that, twrp gets error by me. Look in Slim7 Rom thread. There is described how to change updater script. You have to delete some words in it.
Click to expand...
Click to collapse
please tell in detail which changes you made so i can update OP
You have to try. Perhaps you must not change anything.
Some users have to make changes.
The updater-script is located in /META-INF/com/google/android/updater-script. Look at Slim7 Thread here on xda. There are posting to that.
I did not had to add or remove anything to flash this rom,think it is not for all phone models like that,do some research about it before u post to op...
can anybody share the screenshots of this rom ??
Alright so I tried flashing this ROM without modifying the zip and got the ERROR 7 message. I removed the line mentioned in the first post and still cannot get the ROM to install, same error. Any ideas? My model is himauhl
calikevin said:
Alright so I tried flashing this ROM without modifying the zip and got the ERROR 7 message. I removed the line mentioned in the first post and still cannot get the ROM to install, same error. Any ideas? My model is himauhl
Click to expand...
Click to collapse
U must if comming from sense based rom from twrp delete everything,not internal but data cashe dalvik and system,then install this one...
Boskoel03 said:
U must if comming from sense based rom from twrp delete everything,not internal but data cashe dalvik and system,then install this one...
Click to expand...
Click to collapse
I did that, cache, dalvik cache, and system, even wiped twice then rebooted back into recovery and still got the same error.
calikevin said:
I did that, cache, dalvik cache, and system, even wiped twice then rebooted back into recovery and still got the same error.
Click to expand...
Click to collapse
U did than,then rebooted to recovery!? Idk from where u did that,but wipe must be done from recovery,no just factory reset,but wipe from advanced wipe option in recovery...
Boskoel03 said:
U did than,then rebooted to recovery!? Idk from where u did that,but wipe must be done from recovery,no just factory reset,but wipe from advanced wipe option in recovery...
Click to expand...
Click to collapse
I was in recovery when I wiped everything, tried flashing the ROM which didn't work, then rebooted back into recovery. I thought that was self explanatory
calikevin said:
I was in recovery when I wiped everything, tried flashing the ROM which didn't work, then rebooted back into recovery. I thought that was self explanatory
Click to expand...
Click to collapse
which frimware version are you running and which rom you were on previously
mega_man said:
which frimware version are you running and which rom you were on previously
Click to expand...
Click to collapse
I'm running the LeeDroid Marshmallow ROM, the exact firmware version I'm not sure of but I can probably find out from the ROM thread if necessary. Android version is 6.0
TWRP has come to the SM-C7000!
In order to install this, follow these instructions:
Enable OEM Unlock in developer settings
Enter download mode (Press and hold home + volDown + Power when powered off)
Using Odin, click the 'AP' tab and select the recovery.tar file you've downloaded.
Flash the TWRP image, then hold home + volUp + Power
Congratulations, you are now booted into TWRP!
Remember, on the stock ROM, dm-verity is enabled. What does this mean? If you swipe to allow system modifications, you must flash something that disables dm-verity (such as magisk or a dm-verity disabler.)
Also, on the stock ROM, you MUST format /data before performing any actions, due to the fact that it is force-encrypted by default.
BUGS:
None, as far as I'm aware of.
https://drive.google.com/file/d/1fQRIR_fa7MaHTIT-4ta13477mo-Ir-Ey/view
XDA:DevDB Information
TWRP for c7ltechn, Tool/Utility for the Samsung Galaxy C7
Contributors
wzedlare and minz1
Source Code: https://github.com/TeamWin
Version Information
Status: Stable
Created 2017-10-07
Last Updated 2018-01-04
Thank you very much @wzedlare..
TWRP Recovery for Samsung Galaxy C7 (SM-C7000) was being waited by lots of C7 owners. We hope you fix all the issues and make it a flawless file. You can also collaborate with @javad0644 to make it even better.. He had developed a root file for C7 before..
Keep up this good work..
(Note: Except the first two pictures in the OP you have uploaded, the other pictures are broken. We can't see them. Can you please upload them again?)
lawyer_06 said:
Thank you very much @wzedlare..
TWRP Recovery for Samsung Galaxy C7 (SM-C7000) was being waiting by lots of C7 owners. We hope you fix all the issues and make it a flawless file. You can also collaborate with @javad0644 to make it even better.. He had developed a root file for C7 before..
Keep up this good work..
(Note: Except the first two pictures in the OP you have uploaded, the other pictures are broken. We can't see them. Can you please upload them again?)
Click to expand...
Click to collapse
Thanks.I have already been in contact with javad.There are only 2 pictures, there are no other pictures in the thread.
Build 14.10.2017:
Code:
* MTP issue is fixed.You can use MTP now.
Hello excelent work
thanks for work, Thank you very much, excellent work thanks to people like you, we can enjoy new things in our device, thank you very much, a hug and if I can in any way contribute to the creation of a personalized Rom, or send some money to q you think it would be exceptional of you
thank you very much bro , hope you create some bigger works like custom roms. ?
---------- Post added at 06:09 PM ---------- Previous post was at 05:29 PM ----------
hey guys help me i cant take a backup
it cant read the memory at all
Rkd2000 said:
thank you very much bro , hope you create some bigger works like custom roms.
---------- Post added at 06:09 PM ---------- Previous post was at 05:29 PM ----------
hey guys help me i cant take a backup
it cant read the memory at all
Click to expand...
Click to collapse
Because your data is encrypted.Please read the whole thread.
wzedlare said:
Because your data is encrypted.Please read the whole thread.
Click to expand...
Click to collapse
Can you explain for me how can i solve it please
Rkd2000 said:
Can you explain for me how can i solve it please
Click to expand...
Click to collapse
its can not be fix for now...
Costom rom
Thanks for this hard work
I haven't used this method yet
I'm really waiting for a stable costom rom based on lineage os ??
installed on my c7
i have installed on my c7000 hongkong firmware model. flashed with twrp with auto reboot off. restarted into twrp ,swipe to allow modification but it failed to mount storage. then i did factory reset in twrp and type yes. it removed all the data after that it asked me to install twrp and reboot. (it gives you options in twrp upon factory reset) did that and rebooted again in twrp . this time every thing is working good. mounted storage . after that put the supersu zip file on mobile via usb cable and installed through twrp install option then i installed (no-verity-opt-encrypt-3.1.zip) i dont know is it necessary or not but i installed it . rebooted now my mobile is rooted and twrp recovery is working fine.
only problem i got is that private mode is not working now. xD
thanks for making twrp to work :good:
koolguy0000 said:
i have installed on my c7000 hongkong firmware model. flashed with twrp with auto reboot off. restarted into twrp ,swipe to allow modification but it failed to mount storage. then i did factory reset in twrp and type yes. it removed all the data after that it asked me to install twrp and reboot. (it gives you options in twrp upon factory reset) did that and rebooted again in twrp . this time every thing is working good. mounted storage . after that put the supersu zip file on mobile via usb cable and installed through twrp install option then i installed (no-verity-opt-encrypt-3.1.zip) i dont know is it necessary or not but i installed it . rebooted now my mobile is rooted and twrp recovery is working fine.
only problem i got is that private mode is not working now. xD
thanks for making twrp to work :good:
Click to expand...
Click to collapse
So you can use your data even if you reboot to system? I tried verity zip but it didnt work for me(stock rom still encrypted my data).It is just weird, maybe supersu zip made it possible.
wzedlare said:
So you can use your data even if you reboot to system? I tried verity zip but it didnt work for me(stock rom still encrypted my data).It is just weird, maybe supersu zip made it possible.
Click to expand...
Click to collapse
i did the whole method in twrp . after wiping my data mounting storage started working. if you connect mobile to computer via usb (when you are in twrp recovery) the computer will show you your mobile drive so u can put zip files.
i can send you the files if u want them.
koolguy0000 said:
i did the whole method in twrp . after wiping my data mounting storage started working. if you connect mobile to computer via usb (when you are in twrp recovery) the computer will show you your mobile drive so u can put zip files.
i can send you the files if u want them.
Click to expand...
Click to collapse
I know about mtp(I tried it as I'm the dev.I just couldnt disable verity, please send your supersu and verity zips from pm and I will also try them in my spare time, thanks.
Any solution bro? i hope in you to fix it
Request For Galaxy C7 Pro TWRP Recovery
Dear Sir Kindly Upload TWRP Recovery For Samsung Galaxy C7 (SM-C7010).
Twrp for android 7 with default Hong Kong Rom
Hi,My phone's rom is for hong kong but i already installed android 7 China rom on my phone as u may knoe china roms doesn't contain google apps but i really need to install twrp custom recovery for installing gapps so Can i flash ur file on my phone?
Parsa1996 said:
Hi,My phone's rom is for hong kong but i already installed android 7 China rom on my phone as u may knoe china roms doesn't contain google apps but i really need to install twrp custom recovery for installing gapps so Can i flash ur file on my phone?
Click to expand...
Click to collapse
Hi no DO NOT use this TWRP on china rom
Google play
Parsa1996 said:
Hi,My phone's rom is for hong kong but i already installed android 7 China rom on my phone as u may knoe china roms doesn't contain google apps but i really need to install twrp custom recovery for installing gapps so Can i flash ur file on my phone?
Click to expand...
Click to collapse
hello if you are still trying to find a way to ut the play store in the china rom of android 7...here is a apk for installing google play http://itechify.com/2016/11/10/download-google-installer-apk-chinese-phones/
JohnnyMwanza said:
hello if you are still trying to find a way to ut the play store in the china rom of android 7...here is a apk for installing google play http://itechify.com/2016/11/10/download-google-installer-apk-chinese-phones/
Click to expand...
Click to collapse
Hi DO NOT use THIS app DIDNT WORKS
[RECOVERY][Unofficial][TWRP 3.2.1-0][Notch Friendly] P20 Lite Edition
Don't use WIPE the data partition
HTML:
[/B]
* Your warranty is now void.
* I am not responsible for bricked devices.
* ATTENTION: YOU are choosing to install this recovery at your own risk.
* I do not take responsibility for any problems with your device.
Features:
- This recovery is based on the TWRP from Pretoriano80
- Notch-friendly; due to notch-design I re-positioned the clock, now it is visible all the time
- I added the possibility to do a full device backup, thanks to Sudeep Duhoon
Installation:
Code:
fastboot flash recovery_ramdisk TWRP_3.2.1-0_ANE-LX1_Full_01.img
fastboot reboot
*Note many devices will replace your custom recovery automatically during first boot.
To prevent this, after typing fastboot reboot, remove the USB cable and hold the Vol+ key and boot to TWRP.
Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP.
If you don't follow this step, you will have to repeat the install.
Note: No sources available due to minor changes on the Pretoriano80's TWRP
Special Thanks:
@Pretoriano80
@zxz0O0
@Sudeep Duhoon
@persona78
+TeamWin
+OpenKirin
Version Information:
Status: Under testing
Created: 2018-06-06
Last Updated:
Download link:
TWRP_3.2.1-0_ANE-LX1_Full_01.img
Very first question:
Is it possible to flash a recovery from recovery?
ladislav.heller said:
Very first question:
Is it possible to flash a recovery from recovery?
Click to expand...
Click to collapse
Yes, I tried with success.
If fail for you reflash via fastboot.
kilroystyx said:
Yes, I tried with success.
If fail for you reflash via fastboot.
Click to expand...
Click to collapse
OK, I also flashed successfully.
Now I am able to see the clock
Further testing in progress...
Will this recovery and future custom ROMs be compatible with ane-lx3?
ninjahenry said:
Will this recovery and future custom ROMs be compatible with ane-lx3?
Click to expand...
Click to collapse
This recovery should be compatible with ANE-LX3.
I don't have an answer in short term if this recovery will be compatible with custom ROMs but I'm work on it.
hey,
this crashes for me. it boots fine into twrp then, after 2-3secs it randomly reboots without me doing anything.... any help?
lamsen said:
hey,
this crashes for me. it boots fine into twrp then, after 2-3secs it randomly reboots without me doing anything.... any help?
Click to expand...
Click to collapse
It happened to me with a custom ROM, I flashed a stock one and then TWRP was able to fully boot ?
lamsen said:
hey,
this crashes for me. it boots fine into twrp then, after 2-3secs it randomly reboots without me doing anything.... any help?
Click to expand...
Click to collapse
I recommend you install the Pretoriano80 recovery and check the behavior.
What also helps is post here your device model and Rom installed.
lamsen said:
hey,
this crashes for me. it boots fine into twrp then, after 2-3secs it randomly reboots without me doing anything.... any help?
Click to expand...
Click to collapse
Do you have a stock or treble rom installed?
Today I received an official full OTA update on my p20 lite.
Will the install of this update break the TWRP and/or root?
You can only upgrade with the stock recovery so....
mchtt said:
You can only upgrade with the stock recovery so....
Click to expand...
Click to collapse
Yes, in the meantime I just tried and of course the system was rebooted to TWRP which cannot automatically install stock update.
Now I am going to restore stock recovery.
? trial and error ?
That's how we learn the hard way ?
ladislav.heller said:
Today I received an official full OTA update on my p20 lite.
Will the install of this update break the TWRP and/or root?
Click to expand...
Click to collapse
As mchtt explained, you need reflash at least stock recovery, but in my case was not enough, my system, cust, odm and ramdisk were changed and it fails every attempt.
So, I flashed B126 with HuRUpdater and then I got a clean ROM, then the official B136 FullOTA was installed without issues.
When I backup kernel, i got message "Permission denied"
xperiafan13 said:
When I backup kernel, i got message "Permission denied"
Click to expand...
Click to collapse
Can you give more info?
Rom customized or Stock?
If stock your build number.
Only with kernel you got this message?
Will this work for ANE-LX3?
HaxUrMom69 said:
Will this work for ANE-LX3?
Click to expand...
Click to collapse
Yes, it should work.
If not, let me know and, flash back your stock recovery.
Can you please tell me where you found the stock recovery for your phone coz i have the same problem.
Using ANE-LX2C185
[Highlights]
- Smoothest ROM ever Built for Redmi Go (Tiare)
- Performance Centric ROM
- If you are looking for a ROM with High Performance & Light Weight Gaming , This is for you
[Note]
- Your warranty is void now.
- I’m not responsible for thermonuclear war or any other Random ****s xD.
[Installation Procedure]
- Download ZenXOS.7z file & Patch
- Extract 7z file with help of ZArchiver App Or Any Other Software
- Now you have two Files : ROM & Patch
- Wipe Data, System, Dalvik & Cache
- Flash ROM.img as system image
- Flash Patch.zip
- Flash Webview Fix.zip
- Reboot
- (If Hang On BootAnimation then Press and Hold Power Key for 12 Seconds it will Boot)
[Download Link]
ROM:
https://drive.google.com/file/d/12hA3Cl-kKPS-5I-FD1cEGt4VcKhNQLT8/view?usp=drivesdk
Patch:
https://drive.google.com/file/d/1i3EInVgUutiPHmFG6Oi3W0tXPPwGmlvG/view?usp=drivesdk
Webview Fix:
https://drive.google.com/file/d/1amYZ0UXhPAUIOnPUZCN1XFNwz80thLu6/view?usp=drivesdk
Please press Thanks on my xda Thread
[ScreenShots] : Are attached below !
[Contact Me]
https://instagr.am/sinha.aryan03
https://t.me/TechyMinati
[Credits/Thanks]
@An ASP (Me) - ROM Developer
@oscarhc89 - For Testing
Hey, I haven't been able to boot the rom, I tried reformating the data partition, flashing it from recovery, but I always get stuck at the bootanimation (even after the forced reboot you suggested). Any ideas?
mateuxi said:
Hey, I haven't been able to boot the rom, I tried reformating the data partition, flashing it from recovery, but I always get stuck at the bootanimation (even after the forced reboot you suggested). Any ideas?
Click to expand...
Click to collapse
Just install stock firmware once via recovery, then flash as directed, it will boot. Please press thanks on the thread xD
does it have Gapps? or do we need to flash gapps?
Hello, first of all thank you for your work. It's nice to see than this old cheap phone can get an unnoficial A10. I've Flashed all the files as described in this guide, but stuck on three dots animation. How can I fix this? ?
edit: thanks to the ROM author for amazing support via Telegram. All solved, ROM works great! ?
does this zenosx have wps feature???
hey i m not so much old yet i need that RIP feature till android 8.1[last seen] . can ye confirm that wheather it has a 'WPS ' feature or not... i will be happy if its a +ve reply
TheFatality said:
does it have Gapps? or do we need to flash gapps?
Click to expand...
Click to collapse
No it do not have GApps
jerrry said:
Hello, first of all thank you for your work. It's nice to see than this old cheap phone can get an unnoficial A10. I've Flashed all the files as described in this guide, but stuck on three dots animation. How can I fix this?
edit: thanks to the ROM author for amazing support via Telegram. All solved, ROM works great!
Click to expand...
Click to collapse
Thanks for the feedback ! Btw More ROMs Coming Soon & We Already Booted Android 11 R
xdaguy.in said:
hey i m not so much old yet i need that RIP feature till android 8.1[last seen] . can ye confirm that wheather it has a 'WPS ' feature or not... i will be happy if its a +ve reply
Click to expand...
Click to collapse
Yes ROM Works fine.
Im having Encryption unsuccessful after flashing this rom, im pretty sure i followed the instructions
barumbads said:
Im having Encryption unsuccessful after flashing this rom, im pretty sure i followed the instructions
Click to expand...
Click to collapse
Hey you can contact us via telegram or you can flash as decrypt.zip to decrypt data.
Hello, I think the WebView fix patch is not the correct file? When I download it I get the Resurrection Remix patch. I think the filename may be mistaken. Please help to check!
https://drive.google.com/u/0/uc?id=1amYZ0UXhPAUIOnPUZCN1XFNwz80thLu6&export=download
I finally managed to boot it, first I formated system, data & both caches, then flashed latest miui.zip, then the .img, then the patch.zip (however it rebooted as it was flashing that zip, just got into twrp again and tried to flash the patch again), then the webview fix. AND finally, the decerypt.zip
Now I just need to test it.
does it have VoLTE support ?
mateuxi said:
Hey, I haven't been able to boot the rom, I tried reformating the data partition, flashing it from recovery, but I always get stuck at the bootanimation (even after the forced reboot you suggested). Any ideas?
Click to expand...
Click to collapse
did you fix this issue?
---------- Post added at 07:18 PM ---------- Previous post was at 07:16 PM ----------
mateuxi said:
I finally managed to boot it, first I formated system, data & both caches, then flashed latest miui.zip, then the .img, then the patch.zip (however it rebooted as it was flashing that zip, just got into twrp again and tried to flash the patch again), then the webview fix. AND finally, the decerypt.zip
Now I just need to test it.
Click to expand...
Click to collapse
did it boot? im stuck in bootloop