[RECOVERY][Unofficial][TWRP 3.2.1-0][Notch Friendly] P20 Lite Edition
Don't use WIPE the data partition
HTML:
[/B]
* Your warranty is now void.
* I am not responsible for bricked devices.
* ATTENTION: YOU are choosing to install this recovery at your own risk.
* I do not take responsibility for any problems with your device.
Features:
- This recovery is based on the TWRP from Pretoriano80
- Notch-friendly; due to notch-design I re-positioned the clock, now it is visible all the time
- I added the possibility to do a full device backup, thanks to Sudeep Duhoon
Installation:
Code:
fastboot flash recovery_ramdisk TWRP_3.2.1-0_ANE-LX1_Full_01.img
fastboot reboot
*Note many devices will replace your custom recovery automatically during first boot.
To prevent this, after typing fastboot reboot, remove the USB cable and hold the Vol+ key and boot to TWRP.
Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP.
If you don't follow this step, you will have to repeat the install.
Note: No sources available due to minor changes on the Pretoriano80's TWRP
Special Thanks:
@Pretoriano80
@zxz0O0
@Sudeep Duhoon
@persona78
+TeamWin
+OpenKirin
Version Information:
Status: Under testing
Created: 2018-06-06
Last Updated:
Download link:
TWRP_3.2.1-0_ANE-LX1_Full_01.img
Very first question:
Is it possible to flash a recovery from recovery?
ladislav.heller said:
Very first question:
Is it possible to flash a recovery from recovery?
Click to expand...
Click to collapse
Yes, I tried with success.
If fail for you reflash via fastboot.
kilroystyx said:
Yes, I tried with success.
If fail for you reflash via fastboot.
Click to expand...
Click to collapse
OK, I also flashed successfully.
Now I am able to see the clock
Further testing in progress...
Will this recovery and future custom ROMs be compatible with ane-lx3?
ninjahenry said:
Will this recovery and future custom ROMs be compatible with ane-lx3?
Click to expand...
Click to collapse
This recovery should be compatible with ANE-LX3.
I don't have an answer in short term if this recovery will be compatible with custom ROMs but I'm work on it.
hey,
this crashes for me. it boots fine into twrp then, after 2-3secs it randomly reboots without me doing anything.... any help?
lamsen said:
hey,
this crashes for me. it boots fine into twrp then, after 2-3secs it randomly reboots without me doing anything.... any help?
Click to expand...
Click to collapse
It happened to me with a custom ROM, I flashed a stock one and then TWRP was able to fully boot ?
lamsen said:
hey,
this crashes for me. it boots fine into twrp then, after 2-3secs it randomly reboots without me doing anything.... any help?
Click to expand...
Click to collapse
I recommend you install the Pretoriano80 recovery and check the behavior.
What also helps is post here your device model and Rom installed.
lamsen said:
hey,
this crashes for me. it boots fine into twrp then, after 2-3secs it randomly reboots without me doing anything.... any help?
Click to expand...
Click to collapse
Do you have a stock or treble rom installed?
Today I received an official full OTA update on my p20 lite.
Will the install of this update break the TWRP and/or root?
You can only upgrade with the stock recovery so....
mchtt said:
You can only upgrade with the stock recovery so....
Click to expand...
Click to collapse
Yes, in the meantime I just tried and of course the system was rebooted to TWRP which cannot automatically install stock update.
Now I am going to restore stock recovery.
? trial and error ?
That's how we learn the hard way ?
ladislav.heller said:
Today I received an official full OTA update on my p20 lite.
Will the install of this update break the TWRP and/or root?
Click to expand...
Click to collapse
As mchtt explained, you need reflash at least stock recovery, but in my case was not enough, my system, cust, odm and ramdisk were changed and it fails every attempt.
So, I flashed B126 with HuRUpdater and then I got a clean ROM, then the official B136 FullOTA was installed without issues.
When I backup kernel, i got message "Permission denied"
xperiafan13 said:
When I backup kernel, i got message "Permission denied"
Click to expand...
Click to collapse
Can you give more info?
Rom customized or Stock?
If stock your build number.
Only with kernel you got this message?
Will this work for ANE-LX3?
HaxUrMom69 said:
Will this work for ANE-LX3?
Click to expand...
Click to collapse
Yes, it should work.
If not, let me know and, flash back your stock recovery.
Can you please tell me where you found the stock recovery for your phone coz i have the same problem.
Using ANE-LX2C185
Related
-----------Flashing Rom Is In Your Own Risk-----------
Rom features:-
*G901FXXS1CQC1 Base.
*Deodexed.
*Knox stuff is removed.
*Stock Kernel included.
*Debloated some apps which can be downloaded from Playstore.
*C5 Keyboard.
*Mix Apps Stock & S7 & N7.
*S8 Sounds & Wallpapers & Touchwiz.
*DreamUX Theme UI.
*March Security Patches.
Installation:-
1. Download the rom and put it on your external SD card.
2. Reboot to recovery.
3. Now wipe Dalvik, System, Data, Cache.
4. Install the rom.
5. Install your variant Patch G906L/K/S.
6. Reboot and wait for 10 minutes+.
7. Enjoy the new version
Downloads:-
*ROM:
https://drive.google.com/file/d/0B3xtVwHkmfxzcUdaQ3Zod0VCY1k/view?usp=sharing
*UPDATED_G906K/S Patch:
https://drive.google.com/file/d/0B3xtVwHkmfxzUDFvRFRnb2lzSXM/view?usp=sharing
https://drive.google.com/file/d/0B3xtVwHkmfxzYjBUQkFCeXp2aTA/view?usp=sharing
*DreamUX SystemUI:
https://drive.google.com/file/d/0B3xtVwHkmfxzNlJWYTFSZkpxcmc/view?usp=sharing
Bugs:-
Credits:-
*Samsung for the Source
*Chainfire for the root access
*Kykint for porting guide
*tavatien86
*supergrobi94
Kindly hit thanks if you like this Rom here
I'm just a Noob V3 :laugh::victory:
XDA:DevDB Information
StockRom Port for lentils, ROM for the Samsung Galaxy S 5 Korean LTE-A, ROM for the Samsung Galaxy S5
Contributors
kardinal969
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP Recovery & 6.0.1 CPLx Bootloader
Based On: Touchwiz
Version Information
Status: Stable
Current Stable Version: V3
Stable Release Date: 2017-04-11
Created 2016-05-24
Last Updated 2017-04-11
any screen shot ? Thanks u mate
hait.handle said:
any screen shot ? Thanks u mate
Click to expand...
Click to collapse
@hait.handle
Dear,
click on Discussion tab, then screenshot tab will appear click on it.
Cheers for the effort, but I can't get the rom to boot on my g906s. When I tried to flash the rom, everything seemed fine in TWRP. But, when I flashed the patch right after, TWRP threw a status 7 error. I pulled the battery and wiped art, cache, system, and data. Then, I flashed the rom again to see if it would boot without the patch. My phone bootlooped (as I expected). I pulled the battery again and flashed the patch. This time the patch installed without TWRP error, but my phone just bootlooped on reboot. Just in case, I wiped art and cache, but my phone still just boots to the Samsung label, then reboots - rinse and repeat.
I'm going to let my phone cool down and go back to plain stock.
bud7dha said:
Cheers for the effort, but I can't get the rom to boot on my g906s. When I tried to flash the rom, everything seemed fine in TWRP. But, when I flashed the patch right after, TWRP threw a status 7 error. I pulled the battery and wiped art, cache, system, and data. Then, I flashed the rom again to see if it would boot without the patch. My phone bootlooped (as I expected). I pulled the battery again and flashed the patch. This time the patch installed without TWRP error, but my phone just bootlooped on reboot. Just in case, I wiped art and cache, but my phone still just boots to the Samsung label, then reboots - rinse and repeat.
I'm going to let my phone cool down and go back to plain stock.
Click to expand...
Click to collapse
flash rom then reboot again to recovery and flash patch . but not boot , i'm flash bootloader MM , flash twrp 3.0.2 for callmesuper , flash patch for super , rom booting done . Wifi not work ... now wait to stable version
kotobodj said:
flash rom then reboot again to recovery and flash patch . but not boot , i'm flash bootloader MM , flash twrp 3.0.2 for callmesuper , flash patch for super , rom booting done . Wifi not work ... now wait to stable version
Click to expand...
Click to collapse
I'm fine with stock for now unless a stable aosp type rom becomes available.
bud7dha said:
Cheers for the effort, but I can't get the rom to boot on my g906s. When I tried to flash the rom, everything seemed fine in TWRP. But, when I flashed the patch right after, TWRP threw a status 7 error. I pulled the battery and wiped art, cache, system, and data. Then, I flashed the rom again to see if it would boot without the patch. My phone bootlooped (as I expected). I pulled the battery again and flashed the patch. This time the patch installed without TWRP error, but my phone just bootlooped on reboot. Just in case, I wiped art and cache, but my phone still just boots to the Samsung label, then reboots - rinse and repeat.
I'm going to let my phone cool down and go back to plain stock.
Click to expand...
Click to collapse
@bud7dha @kotobodj
Thanks for your kind word. I will be checking the patch again by myself.
Did you flashed callmesuper TWRP before by any chance because he used old 5.0 bootloader if not then I will checking it out.
If you get error in TWRP just reboot recovery and try to flash again.
I will upload Bootloaders and Modems if anyone needs it.
kardinal969 said:
@bud7dha @kotobodj
Thanks for your kind word. I will be checking the patch again by myself.
Did you flashed callmesuper TWRP before by any chance because he used old 5.0 bootloader if not then I will checking it out.
If you get error in TWRP just reboot recovery and try to flash again.
I will upload Bootloaders and Modems if anyone needs it.
Click to expand...
Click to collapse
I used @kykint's TWRP, but some users are reporting that it won't flash a rom.
bud7dha said:
I used @kykint's TWRP, but some users are reporting that it won't flash a rom.
Click to expand...
Click to collapse
I checked the Patch by myself and saw status 7 error.
What I can advise is the following as you said you flashed Kykint TWRP only so no problems in bootloader.
Now, same procedure but after flashing rom,, Reboot recovery and then flash patch.. Also wipe Cache, Dalvic..
Unfortunately I have G906L and cant test if K/S will boot but it should.
Note: The phone will reboot it self twice after flashing rom due to supersu just be patient.
kardinal969 said:
I checked the Patch by myself and saw status 7 error.
What I can advise is the following as you said you flashed Kykint TWRP only so no problems in bootloader.
Now, same procedure but after flashing rom,, Reboot recovery and then flash patch.. Also wipe Cache, Dalvic..
Unfortunately I have G906L and cant test if K/S will boot but it should.
Note: The phone will reboot it self twice after flashing rom due to supersu just be patient.
Click to expand...
Click to collapse
I tried what you suggested, and the phone kept bootlooping. I'm back on stock with all its 320+ apps, which I managed to debloat to 180 or so. Wish I could have taken a log in TWRP but I had to yank the battery so I could reflash stock with odin. (TWRP may be at fault and not the patch, but I lack the skills to dig deeper.)
A bit off-topic, after I flashed stock through odin, supersu and busybox apps still appeared in my apps drawer - though not working - and the first menu upon boot popped up in Dutch. Anyway, thanks for your efforts; hopefully, others have better luck and/or more constructive feedback.
bud7dha said:
I tried what you suggested, and the phone kept bootlooping. I'm back on stock with all its 320+ apps, which I managed to debloat to 180 or so. Wish I could have taken a log in TWRP but I had to yank the battery so I could reflash stock with odin. (TWRP may be at fault and not the patch, but I lack the skills to dig deeper.)
A bit off-topic, after I flashed stock through odin, supersu and busybox apps still appeared in my apps drawer - though not working - and the first menu upon boot popped up in Dutch. Anyway, thanks for your efforts; hopefully, others have better luck and/or more constructive feedback.
Click to expand...
Click to collapse
Problem noted and Patch fixed and being uploaded.
About off-topic, you need to reboot to recovery if using stock recovery and perform factory reset but beware all internal storage will be wiped.
Note: You dont need to remove battery always just use power button + volume down
Patch UPDATED and Fixed
Patch has been updated and fixed for G906K/S Variant.
Kindly feedback if any further issues.
kotobodj said:
flash rom then reboot again to recovery and flash patch . but not boot , i'm flash bootloader MM , flash twrp 3.0.2 for callmesuper , flash patch for super , rom booting done . Wifi not work ... now wait to stable version
Click to expand...
Click to collapse
You have to flash MM Bootloader again, Use TWRP from Kykint and then Flash this Rom from beginning same steps i wrote.
If you dont have MM Bootloader i can help.
What G906 You have L or K or S ?
kardinal969 said:
You have to flash MM Bootloader again, Use TWRP from Kykint and then Flash this Rom from beginning same steps i wrote.
If you dont have MM Bootloader i can help.
What G906 You have L or K or S ?
Click to expand...
Click to collapse
my phone is G906S . now i'm on stock . more stable with me.
kardinal969 said:
You have to flash MM Bootloader again, Use TWRP from Kykint and then Flash this Rom from beginning same steps i wrote.
If you dont have MM Bootloader i can help.
What G906 You have L or K or S ?
Click to expand...
Click to collapse
I need bootloader MM g906s.please help me
rm-223_bp said:
I need bootloader MM g906s.please help me
Click to expand...
Click to collapse
Hi dear,
this is the link for Bootloader
https://drive.google.com/open?id=0B3xtVwHkmfxzdy1CSGVlcnNnTTA
Seem private mode error ?
COOL
Thanks man. It is the coolest rom with very excellent battery time. I have used many other roms for g906s even the stock but all of them heatup the phone.
And no i wont call you a noob. You did an excellent work here.
CHEERS your rom is cool in this respect.:good::good::good::good::good::good:
---------- Post added at 02:53 PM ---------- Previous post was at 02:48 PM ----------
Fingerprint sensor is working but when after booting ask for the backup password. After inputing backup password fingerprint start to work again.
me
Can i install xposed for G906S?
rm-223_bp said:
Seem private mode error ��
Click to expand...
Click to collapse
I don't use private mode but I will take a look at it.
Kindly please Pm (Personal Message) me and I can guide you step by step
fawadshah33 said:
Thanks man. It is the coolest rom with very excellent battery time. I have used many other roms for g906s even the stock but all of them heatup the phone.
And no i wont call you a noob. You did an excellent work here.
CHEERS your rom is cool in this respect.:good::good::good::good::good::good:
---------- Post added at 02:53 PM ---------- Previous post was at 02:48 PM ----------
Fingerprint sensor is working but when after booting ask for the backup password. After inputing backup password fingerprint start to work again.
me
Click to expand...
Click to collapse
Thanks dear for your kind words, I will look into it soon. Thanks for the feedback
lvd0392 said:
Can i install xposed for G906S?
Click to expand...
Click to collapse
No you cant because this Stock Rom is Odex.
For xposed you need Deodex Rom
i have problem installing custom roms... can anybody help me?
Steps I follow:
1- With Stock ROM (bootloader and modem correct for custom rom) without custom recovery.
2- OEM unlock activated in developers settings
3- Flash TWRP recovery 3.0.2-4 with Odin 3.12.3
4- In TWRP recovery, swype for do modifications
5- Wipe - Format Data - Write "yes" (tried 4 or 5 times)
6- Reboot to recovery again (tried without this)
7- Flash no-verity-opt-encrypt-4.1 from OTB USB (internal storage tried too)... no errors
8- Reboot to recovery (tried without this)
9- Flash custom rom from OTG USB (internal storage tried too)
10- samsung logo and nothing...
I think the problem is with the encryption of the folder /data but it is assumed that the no-verity-opt-encrypt-4.1 file disables encryption.
i tried Superman rom and The Galaxy project, last versions.
have you tried rooting your phone using this guide
works only on exynos models.
lifeisgood210 said:
have you tried rooting your phone using this guide
works only on exynos models.
Click to expand...
Click to collapse
the problem is installing custom roms, root is possible. But thanks
I have the same problem with most all the roms that I have tried. Superman and Phoenix are not working but TheGalaxyProject is.
I think there is something Samsung has done with the latest firmware that makes it impossible to install custom roms. And nobody in this forum knows it yet
Nothing? I need help...
sakun-ice said:
Nothing? I need help...
Click to expand...
Click to collapse
Have you tried other custom recovery beside TWRP.......
AshTechsoft said:
Have you tried other custom recovery beside TWRP.......
Click to expand...
Click to collapse
The installation tutorial says that I have to have the latest version of twrp (3.0.2-4)
sakun-ice said:
The installation tutorial says that I have to have the latest version of twrp (3.0.2-4)
Click to expand...
Click to collapse
Don't worry try other recovery beside twrp nothing will happens
!!! BUT BEFORE ANY STEPS YOU HAVE TO MAKE BACKUP OF YOUR DEVICE!!!
AshTechsoft said:
Don't worry try other recovery beside twrp nothing will happens
!!! BUT BEFORE ANY STEPS YOU HAVE TO MAKE BACKUP OF YOUR DEVICE!!!
Click to expand...
Click to collapse
Thanks. I'll try tomorrow. I will tell my experience here.
There is no recovery other than TWRP. Another option?
sakun-ice said:
There is no recovery other than TWRP. Another option?
Click to expand...
Click to collapse
Try after flash oldest twrp for your s7 means twrp 3.0.0-0 by Odin
Then try to install custom roms.........
Send your openion.....
---------- Post added at 01:25 PM ---------- Previous post was at 01:24 PM ----------
sakun-ice said:
There is no recovery other than TWRP. Another option?
Click to expand...
Click to collapse
Try after flash oldest twrp for your s7 means twrp 3.0.0-0 by Odin
Then try to install custom roms.........
Here is link of twrp 3.0.0-0
https://dl.twrp.me/herolte/twrp-3.0.0-0-herolte.img.tar
Send your openion.....
solved!!
The problem is that I downloaded the rom and the file was corrupt. Something happens with my computer and my wifi adapter.
sakun-ice said:
solved!!
The problem is that I downloaded the rom and the file was corrupt. Something happens with my computer and my wifi adapter.
Click to expand...
Click to collapse
Yeah!!! I happy that your problem is solved......
Good day to everyone! I wish to provide proper steps on how to install the latest Oreo custom ROMs via TWRP in order to lessen the clutter in the custom ROM threads.
You'll need the following:
Latest TWRP Official (Fastboot TWRP)
Latest TWRP Installer (PERMANENT TWRP)
Considering you already installed TWRP via fastboot, we'll make it so that it will be permanently installed and you will not need to flash TWRP via bootloader again.
Download ROM + GApps (or no gapps if Pixel Experience)
Reboot to latest Official TWRP
Do necessary wipes (FORMAT data if having storage number issue; if not, wipe system/data/cache) then transfer ROM + gapps + magisk to internal/external storage
Flash ROM (don't reboot)
Flash latest TWRP Installer (for Permanent TWRP)
Reboot recovery (no need to transfer slots anymore as TWRP does it automatically)
Flash Gapps + Magisk
Reboot to system
To DIRTY FLASH or update the same ROM with an updated version
Reboot to recovery
Flash ROM
Flash TWRP Installer
Reboot recovery
Flash Gapps + Magisk
Reboot to system
For installing custom kernels
Download custom kernel
Reboot recovery
Flash custom kernel
Reboot to system
All of these has been tried and tested by me already.
Hey , where to flash rom??
As you have written gapps + magisk , gapps + magisk twice
sikoo1996 said:
Hey , where to flash rom?
As you have written gapps + magisk , gapps + magisk twice
Click to expand...
Click to collapse
I don't know what you mean. Read it again but slowly.
thnx man.
please add instructions to flash twrp permanent or share link.
vkbhanwariya said:
thnx man.
please add instructions to flash twrp permanent or share link.
Click to expand...
Click to collapse
+1
vkbhanwariya said:
thnx man.
please add instructions to flash twrp permanent or share link.
Click to expand...
Click to collapse
dceamit46 said:
+1
Click to expand...
Click to collapse
Guys, TWRP Installer IS the Permanent TWRP. That's why you need to flash it every time after flashing custom ROMs.
joeyhuab said:
Guys, TWRP Installer IS the Permanent TWRP. That's why you need to flash it every time after flashing custom ROMs.
Click to expand...
Click to collapse
thanks mate now ROM flashing seems very easy
vkbhanwariya said:
thanks mate now ROM flashing seems very easy
Click to expand...
Click to collapse
You're welcome! Good luck in switching ROMs!
Sent from my Xiaomi Mi A1 using XDA Labs
joeyhuab said:
You're welcome! Good luck in switching ROMs!
Click to expand...
Click to collapse
I really want to thank you for putting this up. Its immensely helpful and once again you are best at what you do.
gunmanrishi said:
I really want to thank you for putting this up. Its immensely helpful and once again you are best at what you do.
Click to expand...
Click to collapse
You're more than welcome and I'm always more than glad to help out the community. :highfive:
Sent from my Xiaomi Mi A1 using XDA Labs
With custom ROMs we have to install Twrp installer every time along with ROM zip, bit awkward.
Is it just me but every time I flash twrp after flashing rom, I got error 20 when flashing gapps. Here's my steps:
- flash rom
- switch partition
- flash twrp
- reboot recovery (or bootloader then flashboot recovery)
- flash gapps -> error 20
Without flashing twrp permanent, I can flash gapps, no error.
madhpharma said:
With custom ROMs we have to install Twrp installer every time along with ROM zip, bit awkward.
Click to expand...
Click to collapse
Yep. That's because the ROM being flashed overwrites the recovery since there's no recovery partition.
kopitalk said:
Is it just me but every time I flash twrp after flashing rom, I got error 20 when flashing gapps. Here's my steps:
- flash rom
- switch partition
- flash twrp
- reboot recovery (or bootloader then flashboot recovery)
- flash gapps -> error 20
Without flashing twrp permanent, I can flash gapps, no error.
Click to expand...
Click to collapse
Did you flash the TWRP.img or TWRP Installer.zip in TWRP?
Sent from my Xiaomi Mi A1 using XDA Labs
joeyhuab said:
Yep. That's because the ROM being flashed overwrites the recovery since there's no recovery partition.
Did you flash the TWRP.img or TWRP Installer.zip in TWRP?
Click to expand...
Click to collapse
Twrp installer, to be exact Twrp-recoveryInstaller-3.2.1-2-oreo.zip
joeyhuab said:
Guys, TWRP Installer IS the Permanent TWRP. That's why you need to flash it every time after flashing custom ROMs.
Click to expand...
Click to collapse
If we need to flash it every time after flash rom so how it's called permanent TWRP I don't understand. That because our device don't have recovery partition? If that so where this TWRP installed ( in which partition)?
cherryb8844 said:
If we need to flash it every time after flash rom so how it's called permanent TWRP I don't understand. That because our device don't have recovery partition? If that so where this TWRP installed ( in which partition)?
Click to expand...
Click to collapse
It's called permanent twrp because it won't get replaced by built in recovery whenever you reboot to recovery from system. TWRP gets installed within a part of the system partition.
Sent from my Xiaomi Mi A1 using XDA Labs
kopitalk said:
Is it just me but every time I flash twrp after flashing rom, I got error 20 when flashing gapps. Here's my steps:
- flash rom
- switch partition
- flash twrp
- reboot recovery (or bootloader then flashboot recovery)
- flash gapps -> error 20
Without flashing twrp permanent, I can flash gapps, no error.
Click to expand...
Click to collapse
Error 20 if I'm not wrong, means you are using the wrong gapps package.
Are you using the right one?
varben said:
Error 20 if I'm not wrong, means you are using the wrong gapps package.
Are you using the right one?
Click to expand...
Click to collapse
Yes, I certainly use the right one (8.1), that's why I was baffled when twrp says that my device is 7.1.2 every time I tried to flash the 8.1 gapps. Anyway, flashing rom then straightaway followed by gapps and magisk was fine. I can flash twrp installer later on. But I just don't understand why.
kopitalk said:
Yes, I certainly use the right one (8.1), that's why I was baffled when twrp says that my device is 7.1.2 every time I tried to flash the 8.1 gapps. Anyway, flashing rom then straightaway followed by gapps and magisk was fine. I can flash twrp installer later on. But I just don't understand why.
Click to expand...
Click to collapse
Well that's weird. Works for me by flashing Gapps and Magisk after rebooting to recovery since it switches slots when you do that. Did you possibly come from a Nougat ROM which is why that's the error showing up?
Sent from my Xiaomi Mi A1 using XDA Labs
joeyhuab said:
Well that's weird. Works for me by flashing Gapps and Magisk after rebooting to recovery since it switches slots when you do that. Did you possibly come from a Nougat ROM which is why that's the error showing up?
Click to expand...
Click to collapse
I was thinking of that too but no, I was on Oreo Jan built the first time I rooted the phone and flash LOS15.1. Do you think I should at least flash Oreo stock once? Maybe my bootloader is still Nougat
Hi, how do I install the latest android P on my oneplus 6? I have an unlocked bootloader with twrp installed but not rooted.
Download the P zip via OnePlus forums, flash it through the update section in settings and wipe the phone via recovery. It will wipe TWRP though and replace it with stock recovery.
roniistar said:
Hi, how do I install the latest android P on my oneplus 6? I have an unlocked bootloader with twrp installed but not rooted.
Click to expand...
Click to collapse
Download the full version, install in TWRP 3.2.1 and install TWRP immediately afterwards, then back to the TWRP menu and reinstall TWRP.zip again, then restart and enjoy
ed-gonzo said:
Download the full version, install in TWRP 3.2.1 and install TWRP immediately afterwards, then back to the TWRP menu and reinstall TWRP.zip again, then restart and enjoy
Click to expand...
Click to collapse
Have you tried this? I don't think this will work. Don't i have to wipe everything?
Mike.YT said:
Download the P zip via OnePlus forums, flash it through the update section in settings and wipe the phone via recovery. It will wipe TWRP though and replace it with stock recovery.
Click to expand...
Click to collapse
Thanks. Will give this a try
roniistar said:
Have you tried this? I don't think this will work. Don't i have to wipe everything?
Click to expand...
Click to collapse
Yes, it worked this way for me
ed-gonzo said:
Download the full version, install in TWRP 3.2.1 and install TWRP immediately afterwards, then back to the TWRP menu and reinstall TWRP.zip again, then restart and enjoy
Click to expand...
Click to collapse
When u say back to twrp menu you mean after reboot to recovery and then to install twrp.zip or in the same session to install twrp twice?
what are known bugs in DP3?
does snap chat work? as reports say that safety net fails
galza said:
When u say back to twrp menu you mean after reboot to recovery and then to install twrp.zip or in the same session to install twrp twice?
Click to expand...
Click to collapse
So that TWRP is not deleted, I recommend to install it again in TWRP menu!
Sure is safe.
virtyx said:
what are known bugs in DP3?
does snap chat work? as reports say that safety net fails
Click to expand...
Click to collapse
works but i have magisk installed so maybe that did something
NateDev said:
works but i have magisk installed so maybe that did something
Click to expand...
Click to collapse
reveted back to 5.1.9
DP3 is nice, but too buggy, laggy and non user friendly, the gestures feel so much different from stable, i logged a few bugs but not suitable for a DD
i am unable to root android p beta 3 and twrp also not working on my one plus 6 why twrp not working and why no root
manohar shenolikar said:
i am unable to root android p beta 3 and twrp also not working on my one plus 6 why twrp not working and why no root
Click to expand...
Click to collapse
Install the stable version of android p now and twrp does work. use bluesparks twrp version found in xda.
But what TWRP? Is the TWRP on the official site working also on Android 9?
Hi, i have a question :
I'm on Android pie stable with root and magisk.
But i can't make a advanced reboot to launch TWRP, anyone as a issue please ?
Pepinow said:
Hi, i have a question :
I'm on Android pie stable with root and magisk.
But i can't make a advanced reboot to launch TWRP, anyone as a issue please ?
Click to expand...
Click to collapse
It's been removed in pie.
---------- Post added at 10:35 AM ---------- Previous post was at 10:34 AM ----------
zappomax said:
But what TWRP? Is the TWRP on the official site working also on Android 9?
Click to expand...
Click to collapse
No, use bluespark twrp found on his kernel thread.
yldlj said:
It's been removed in pie.
Yes, i see that. How do I install a new kernel without going through TWRP?
It's maybe me but i can't lunch TWRP or it's only by plateform tools ?
Click to expand...
Click to collapse
Pepinow said:
yldlj said:
It's been removed in pie.
Yes, i see that. How do I install a new kernel without going through TWRP?
It's maybe me but i can't lunch TWRP or it's only by plateform tools ?
Click to expand...
Click to collapse
Flash through ex kernel manager app
If the kernel uses "any kernel" then go to magisk and flash magisk one more time aswell, reboot.
What your saying is that you can't boot to twrp in any way? Not even with phone off and volume down? If not, reinstall twrp (I recommend blu_spark)
Click to expand...
Click to collapse
whizeguy said:
Pepinow said:
Flash through ex kernel manager app
If the kernel uses "any kernel" then go to magisk and flash magisk one more time aswell, reboot.
What your saying is that you can't boot to twrp in any way? Not even with phone off and volume down? If not, reinstall twrp (I recommend blu_spark)
Click to expand...
Click to collapse
I don't have ex kernel, it's not free it's exactly ?
Exact, i can't boot twrp, phone off and volume down take a screenshot and if its shutdown, there is a simple reboot.
I'm noob lol, if i reinstall twrp it's wipe my phone ?
Click to expand...
Click to collapse
@Pepinow Power off your phone. Hold vol up and power, that will take you to fastboot. From there use the vol keys to show recovery at the top then boot to it. This is of course assuming you flashed the twrp zip when first installing it
from MOKEE
i flashed miui10.0.0.2
the first attempt for magisk failed
but then second attempt magisk flashed successfully
I rebooted expecting miui10.0.0.2 but got in to booloops
now !
every custom rom is also giving me bootloops...
i tried RR and crdroid of Sept2018 build....
only latest mokee is working!
what is this? what am i missing?
after flashing mokee 20181103 813
i am bound to mokee only
i tried flashing
miui10.002 / miui10.001 / miui9.6.7 (all in antirollback 4)
and
I also tried flashing
crdroid4.8 / crdroid 5.0 / RR6.2 / MSM Extended
all give STRANGE BOOTLOOPS!!!!!
only mokee works now .... i tried previous version of mokee , thats working also!
but whenever i flash any thing accept mokee.. (even miui) i go in to bootloops
what seems to be wrong?
partition corrupt? if yes then how to fix this?
i wana try crdroid... but i always endup in bootloops
How did you flashed MIUI ROM ?? Recovery or fastboot method ?? I suggest you to flash fastboot ROM
Try LineageOs 15.1 official. İf it works that means the problem is about encryption.
SunilSuni said:
How did you flashed MIUI ROM ?? Recovery or fastboot method ?? I suggest you to flash fastboot ROM
Click to expand...
Click to collapse
i flashed miui via Recovery! , i usually keep skipping roms via twrp and has even flashed 9.65/9.67/10.0.01 MIUI with twrp only and everytime it works just fine untill today
MOKEE keeps releasing xperimental images, on daily bases, i had been on MOKEE since 21oct2018 and today after 3/11/2018 patch, i decided to try MIUI10
I don't have authorised account to flash edl...
can i flash EDL rom via Qualcom (Qloader? )
also feel reluctant to remove back cover.... but i wana what has happend?
i will be flashing persist.img .. just incase...
fnldstntn said:
Try LineageOs 15.1 official. İf it works that means the problem is about encryption.
Click to expand...
Click to collapse
and if yes then how one can fix encryption? / EDL flashing ?
i am gonna flash linageOS15.1
YasuHamed said:
and if yes then how one can fix encryption? / EDL flashing ?
i am gonna flash linageOS15.1
Click to expand...
Click to collapse
You will have to decrypt your device with TWRP.
fnldstntn said:
You will have to decrypt your device with TWRP.
Click to expand...
Click to collapse
i flashed lineage15.1, it didnt go in to bootloops but stuck on the main screen for forever,
went back to recovery, (redwolf) via (fastboot boot recovery )
this time it allowed me to
format and change /data /system partition to and fro ( ext4 to exFAT_) and back to ext4
now flashed CRDROID4.7
and it WORKED
YasuHamed said:
i flashed miui via Recovery! , i usually keep skipping roms via twrp and has even flashed 9.65/9.67/10.0.01 MIUI with twrp only and everytime it works just fine untill today
MOKEE keeps releasing xperimental images, on daily bases, i had been on MOKEE since 21oct2018 and today after 3/11/2018 patch, i decided to try MIUI10
I don't have authorised account to flash edl...
can i flash EDL rom via Qualcom (Qloader? )
also feel reluctant to remove back cover.... but i wana what has happend?
i will be flashing persist.img .. just incase...
Click to expand...
Click to collapse
You don't need authorised account to flash fastboot ROM. Just download fastboot ROM and flash it using MiFlash (this method requires bootloader unlock)
Authorised account is only for flashing fastboot ROM on bricked device
YasuHamed said:
i flashed lineage15.1, it didnt go in to bootloops but stuck on the main screen for forever,
went back to recovery, (redwolf) via (fastboot boot recovery )
this time it allowed me to
format and change /data /system partition to and fro ( ext4 to exFAT_) and back to ext4
now flashed CRDROID4.7
and it WORKED
Click to expand...
Click to collapse
Lineage os requires encryption.so you got stuck at logo