[ROM] MoKee [71.2] OFFICIAL HIMAUL[5-01-17] - One (M9) Android Development

Hello Guys i recently i found an official supported rom for hima ul on mokee webiste would like to share it here.The rom is based on android 7.1.2 It is fully stable and can be used as a daily driver
UPDATE: 2017-5-1
Rom has been updated to nougat
Download
IF YOU HAVE STATUS 6 OR 7 ERROR IN TWRP NOTE: open the downloaded rom zip and open the following file located in
x.zip/META-INF/com/google/android/update-script
and remove the following line to avoid errors in TWRP
"Assert(hima.verify_sbl1("1.2.50.1.36") == "1");"
happy flashing :good:

I tried this rom and loved it. But after some weeks my phone only show black screen and does not reboot. Don't know if mokee causes the failure. Or if it was a hardware issue. I think the second.
I got a brandnew m9 phone and use another nougat rom.
And yes. Mokee 60.1 is Android 6 and cam works.

mega_man said:
Hello Guys i recently i found an official supported rom for hima ul on mokee webiste would like to share it here.The rom is based on android 6.0 source so i guess the camera is working
Download
Please test it out and share screenshots of it thanks
Click to expand...
Click to collapse
MoKee is one great rom,i was using it and it is sooo stable and u can always count on updates regulary,when i get born of sense,i use this rom.

Nice that here on XDA is a mokee thread in m9 section. The rom deserves its own thread.

please share some screenshots of the rom so i can update the thread @dsg2003 @Boskoel03

So it's marshmallow?

rjcreations said:
So it's marshmallow?
Click to expand...
Click to collapse
yes marshmallow full stable with working camera

dsg2003 said:
Nice that here on XDA is a mokee thread in m9 section. The rom deserves its own thread.
Click to expand...
Click to collapse
I was using it,not now,so i can not help u at the momment... U have it all,and all the rest info about the rom on their G+ page...

Same here. I used it some time ago. So I cannot show screenshots.
Give it a try. Make a nandroid backup before, so you can switch back easily, if you don't like mokee.
Advice for you: I had to make changes in updater script before flashing. Without that, twrp gets error by me. Look in Slim7 Rom thread. There is described how to change updater script. You have to delete some words in it.

dsg2003 said:
Same here. I used it some time ago. So I cannot show screenshots.
Give it a try. Make a nandroid backup before, so you can switch back easily, if you don't like mokee.
Advice for you: I had to make changes in updater script before flashing. Without that, twrp gets error by me. Look in Slim7 Rom thread. There is described how to change updater script. You have to delete some words in it.
Click to expand...
Click to collapse
please tell in detail which changes you made so i can update OP

You have to try. Perhaps you must not change anything.
Some users have to make changes.
The updater-script is located in /META-INF/com/google/android/updater-script. Look at Slim7 Thread here on xda. There are posting to that.

I did not had to add or remove anything to flash this rom,think it is not for all phone models like that,do some research about it before u post to op...

can anybody share the screenshots of this rom ??

Alright so I tried flashing this ROM without modifying the zip and got the ERROR 7 message. I removed the line mentioned in the first post and still cannot get the ROM to install, same error. Any ideas? My model is himauhl

calikevin said:
Alright so I tried flashing this ROM without modifying the zip and got the ERROR 7 message. I removed the line mentioned in the first post and still cannot get the ROM to install, same error. Any ideas? My model is himauhl
Click to expand...
Click to collapse
U must if comming from sense based rom from twrp delete everything,not internal but data cashe dalvik and system,then install this one...

Boskoel03 said:
U must if comming from sense based rom from twrp delete everything,not internal but data cashe dalvik and system,then install this one...
Click to expand...
Click to collapse
I did that, cache, dalvik cache, and system, even wiped twice then rebooted back into recovery and still got the same error.

calikevin said:
I did that, cache, dalvik cache, and system, even wiped twice then rebooted back into recovery and still got the same error.
Click to expand...
Click to collapse
U did than,then rebooted to recovery!? Idk from where u did that,but wipe must be done from recovery,no just factory reset,but wipe from advanced wipe option in recovery...

Boskoel03 said:
U did than,then rebooted to recovery!? Idk from where u did that,but wipe must be done from recovery,no just factory reset,but wipe from advanced wipe option in recovery...
Click to expand...
Click to collapse
I was in recovery when I wiped everything, tried flashing the ROM which didn't work, then rebooted back into recovery. I thought that was self explanatory

calikevin said:
I was in recovery when I wiped everything, tried flashing the ROM which didn't work, then rebooted back into recovery. I thought that was self explanatory
Click to expand...
Click to collapse
which frimware version are you running and which rom you were on previously

mega_man said:
which frimware version are you running and which rom you were on previously
Click to expand...
Click to collapse
I'm running the LeeDroid Marshmallow ROM, the exact firmware version I'm not sure of but I can probably find out from the ROM thread if necessary. Android version is 6.0

Related

[HELP NEEDED] Mi4i stuck after boot logo[Q]

I am trying to install the Carbon Rom in my device.
1. Flashed TWRP and ROOTed
2. Cleared the delvic + cache
3. Flashed the rom and gapps
4. Restarted
5. Phone goes blank at finishing booting.
Tried 3 times
Any solution to this problem???
USE SEARCH BEFORE POSTING SUCH PROBLEMS! THIS HAS BEEN DISCUSSED MANY TIMES.
Did you flash miui6? It's a problem with firmware.
I think you didn't flash miui6 (6.6.x or 5.6.11). Well there is an other solution.
https://basketbuild.com/filedl/devs?...p-6.6.10.0.zip
Flash this file after wiping. Then flash the rom and gapps.
sharan.nyn said:
USE SEARCH BEFORE POSTING SUCH PROBLEMS! THIS HAS BEEN DISCUSSED MANY TIMES.
Did you flash miui6? It's a problem with firmware.
I think you didn't flash miui6 (6.6.x or 5.6.11). Well there is an other solution.
https://basketbuild.com/filedl/devs?...p-6.6.10.0.zip
Flash this file after wiping. Then flash the rom and gapps.
Click to expand...
Click to collapse
The link is dead. Can you please provide me a live link. There are so many links I am getting confused.
Download it from miui site ,-_- there is an option bro to download the older one
faizauthar12 said:
Download it from miui site ,-_- there is an option bro to download the older one
Click to expand...
Click to collapse
I have flashed with a miui 6 rom in fastboot mode. Will it work now???
Stop asking ,just do it
faizauthar12 said:
Stop asking ,just do it
Click to expand...
Click to collapse
It says error. To be specific "Error executing the ......"
Really tired what to do now man. I am most probably doing something else wrong . BTW thanks for the help.
Use twrp bro not the stock recovery
---------- Post added at 09:23 PM ---------- Previous post was at 09:23 PM ----------
If that problem appear ,it maybe because the zip is corrupted ,try another rom dude
juabhi said:
It says error. To be specific "Error executing the ......"
Really tired what to do now man. I am most probably doing something else wrong . BTW thanks for the help.
Click to expand...
Click to collapse
You have to be patient with these stuff, and probably not panic like this
is the problem solved now?
juabhi said:
I am trying to install the Carbon Rom in my device.
1. Flashed TWRP and ROOTed
2. Cleared the delvic + cache
3. Flashed the rom and gapps
4. Restarted
5. Phone goes blank at finishing booting.
Tried 3 times
Any solution to this problem???
Click to expand...
Click to collapse
You have to wipe system and data too before indtalling the rom and not just dalvik and cache
In order to restore to MIUI, you must flash zip using stock recovery, not TWRP!
Try the fastboot method if flashing zip doesn't work for you.
Brdr first flash miui 6 old rom .then try again.

[ROM][TW][6.0.1][DEODEXED][CQC1][11.04.17] StockRom_V3_G901F_Port_For_G906

-----------Flashing Rom Is In Your Own Risk-----------
​
Rom features:-
*G901FXXS1CQC1 Base.
*Deodexed.
*Knox stuff is removed.
*Stock Kernel included.
*Debloated some apps which can be downloaded from Playstore.
*C5 Keyboard.
*Mix Apps Stock & S7 & N7.
*S8 Sounds & Wallpapers & Touchwiz.
*DreamUX Theme UI.
*March Security Patches.
Installation:-
1. Download the rom and put it on your external SD card.
2. Reboot to recovery.
3. Now wipe Dalvik, System, Data, Cache.
4. Install the rom.
5. Install your variant Patch G906L/K/S.
6. Reboot and wait for 10 minutes+.
7. Enjoy the new version
Downloads:-
*ROM:
https://drive.google.com/file/d/0B3xtVwHkmfxzcUdaQ3Zod0VCY1k/view?usp=sharing
*UPDATED_G906K/S Patch:
https://drive.google.com/file/d/0B3xtVwHkmfxzUDFvRFRnb2lzSXM/view?usp=sharing
https://drive.google.com/file/d/0B3xtVwHkmfxzYjBUQkFCeXp2aTA/view?usp=sharing
*DreamUX SystemUI:
https://drive.google.com/file/d/0B3xtVwHkmfxzNlJWYTFSZkpxcmc/view?usp=sharing
Bugs:-
Credits:-
*Samsung for the Source
*Chainfire for the root access
*Kykint for porting guide
*tavatien86
*supergrobi94
Kindly hit thanks if you like this Rom here
I'm just a Noob V3 :laugh::victory:
XDA:DevDB Information
StockRom Port for lentils, ROM for the Samsung Galaxy S 5 Korean LTE-A, ROM for the Samsung Galaxy S5
Contributors
kardinal969
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP Recovery & 6.0.1 CPLx Bootloader
Based On: Touchwiz
Version Information
Status: Stable
Current Stable Version: V3
Stable Release Date: 2017-04-11
Created 2016-05-24
Last Updated 2017-04-11
any screen shot ? Thanks u mate
hait.handle said:
any screen shot ? Thanks u mate
Click to expand...
Click to collapse
@hait.handle
Dear,
click on Discussion tab, then screenshot tab will appear click on it.
Cheers for the effort, but I can't get the rom to boot on my g906s. When I tried to flash the rom, everything seemed fine in TWRP. But, when I flashed the patch right after, TWRP threw a status 7 error. I pulled the battery and wiped art, cache, system, and data. Then, I flashed the rom again to see if it would boot without the patch. My phone bootlooped (as I expected). I pulled the battery again and flashed the patch. This time the patch installed without TWRP error, but my phone just bootlooped on reboot. Just in case, I wiped art and cache, but my phone still just boots to the Samsung label, then reboots - rinse and repeat.
I'm going to let my phone cool down and go back to plain stock.
bud7dha said:
Cheers for the effort, but I can't get the rom to boot on my g906s. When I tried to flash the rom, everything seemed fine in TWRP. But, when I flashed the patch right after, TWRP threw a status 7 error. I pulled the battery and wiped art, cache, system, and data. Then, I flashed the rom again to see if it would boot without the patch. My phone bootlooped (as I expected). I pulled the battery again and flashed the patch. This time the patch installed without TWRP error, but my phone just bootlooped on reboot. Just in case, I wiped art and cache, but my phone still just boots to the Samsung label, then reboots - rinse and repeat.
I'm going to let my phone cool down and go back to plain stock.
Click to expand...
Click to collapse
flash rom then reboot again to recovery and flash patch . but not boot , i'm flash bootloader MM , flash twrp 3.0.2 for callmesuper , flash patch for super , rom booting done . Wifi not work ... now wait to stable version
kotobodj said:
flash rom then reboot again to recovery and flash patch . but not boot , i'm flash bootloader MM , flash twrp 3.0.2 for callmesuper , flash patch for super , rom booting done . Wifi not work ... now wait to stable version
Click to expand...
Click to collapse
I'm fine with stock for now unless a stable aosp type rom becomes available.
bud7dha said:
Cheers for the effort, but I can't get the rom to boot on my g906s. When I tried to flash the rom, everything seemed fine in TWRP. But, when I flashed the patch right after, TWRP threw a status 7 error. I pulled the battery and wiped art, cache, system, and data. Then, I flashed the rom again to see if it would boot without the patch. My phone bootlooped (as I expected). I pulled the battery again and flashed the patch. This time the patch installed without TWRP error, but my phone just bootlooped on reboot. Just in case, I wiped art and cache, but my phone still just boots to the Samsung label, then reboots - rinse and repeat.
I'm going to let my phone cool down and go back to plain stock.
Click to expand...
Click to collapse
@bud7dha @kotobodj
Thanks for your kind word. I will be checking the patch again by myself.
Did you flashed callmesuper TWRP before by any chance because he used old 5.0 bootloader if not then I will checking it out.
If you get error in TWRP just reboot recovery and try to flash again.
I will upload Bootloaders and Modems if anyone needs it.
kardinal969 said:
@bud7dha @kotobodj
Thanks for your kind word. I will be checking the patch again by myself.
Did you flashed callmesuper TWRP before by any chance because he used old 5.0 bootloader if not then I will checking it out.
If you get error in TWRP just reboot recovery and try to flash again.
I will upload Bootloaders and Modems if anyone needs it.
Click to expand...
Click to collapse
I used @kykint's TWRP, but some users are reporting that it won't flash a rom.
bud7dha said:
I used @kykint's TWRP, but some users are reporting that it won't flash a rom.
Click to expand...
Click to collapse
I checked the Patch by myself and saw status 7 error.
What I can advise is the following as you said you flashed Kykint TWRP only so no problems in bootloader.
Now, same procedure but after flashing rom,, Reboot recovery and then flash patch.. Also wipe Cache, Dalvic..
Unfortunately I have G906L and cant test if K/S will boot but it should.
Note: The phone will reboot it self twice after flashing rom due to supersu just be patient.
kardinal969 said:
I checked the Patch by myself and saw status 7 error.
What I can advise is the following as you said you flashed Kykint TWRP only so no problems in bootloader.
Now, same procedure but after flashing rom,, Reboot recovery and then flash patch.. Also wipe Cache, Dalvic..
Unfortunately I have G906L and cant test if K/S will boot but it should.
Note: The phone will reboot it self twice after flashing rom due to supersu just be patient.
Click to expand...
Click to collapse
I tried what you suggested, and the phone kept bootlooping. I'm back on stock with all its 320+ apps, which I managed to debloat to 180 or so. Wish I could have taken a log in TWRP but I had to yank the battery so I could reflash stock with odin. (TWRP may be at fault and not the patch, but I lack the skills to dig deeper.)
A bit off-topic, after I flashed stock through odin, supersu and busybox apps still appeared in my apps drawer - though not working - and the first menu upon boot popped up in Dutch. Anyway, thanks for your efforts; hopefully, others have better luck and/or more constructive feedback.
bud7dha said:
I tried what you suggested, and the phone kept bootlooping. I'm back on stock with all its 320+ apps, which I managed to debloat to 180 or so. Wish I could have taken a log in TWRP but I had to yank the battery so I could reflash stock with odin. (TWRP may be at fault and not the patch, but I lack the skills to dig deeper.)
A bit off-topic, after I flashed stock through odin, supersu and busybox apps still appeared in my apps drawer - though not working - and the first menu upon boot popped up in Dutch. Anyway, thanks for your efforts; hopefully, others have better luck and/or more constructive feedback.
Click to expand...
Click to collapse
Problem noted and Patch fixed and being uploaded.
About off-topic, you need to reboot to recovery if using stock recovery and perform factory reset but beware all internal storage will be wiped.
Note: You dont need to remove battery always just use power button + volume down
Patch UPDATED and Fixed
Patch has been updated and fixed for G906K/S Variant.
Kindly feedback if any further issues.
kotobodj said:
flash rom then reboot again to recovery and flash patch . but not boot , i'm flash bootloader MM , flash twrp 3.0.2 for callmesuper , flash patch for super , rom booting done . Wifi not work ... now wait to stable version
Click to expand...
Click to collapse
You have to flash MM Bootloader again, Use TWRP from Kykint and then Flash this Rom from beginning same steps i wrote.
If you dont have MM Bootloader i can help.
What G906 You have L or K or S ?
kardinal969 said:
You have to flash MM Bootloader again, Use TWRP from Kykint and then Flash this Rom from beginning same steps i wrote.
If you dont have MM Bootloader i can help.
What G906 You have L or K or S ?
Click to expand...
Click to collapse
my phone is G906S . now i'm on stock . more stable with me.
kardinal969 said:
You have to flash MM Bootloader again, Use TWRP from Kykint and then Flash this Rom from beginning same steps i wrote.
If you dont have MM Bootloader i can help.
What G906 You have L or K or S ?
Click to expand...
Click to collapse
I need bootloader MM g906s.please help me
rm-223_bp said:
I need bootloader MM g906s.please help me
Click to expand...
Click to collapse
Hi dear,
this is the link for Bootloader
https://drive.google.com/open?id=0B3xtVwHkmfxzdy1CSGVlcnNnTTA
Seem private mode error ?
COOL
Thanks man. It is the coolest rom with very excellent battery time. I have used many other roms for g906s even the stock but all of them heatup the phone.
And no i wont call you a noob. You did an excellent work here.
CHEERS your rom is cool in this respect.:good::good::good::good::good::good:
---------- Post added at 02:53 PM ---------- Previous post was at 02:48 PM ----------
Fingerprint sensor is working but when after booting ask for the backup password. After inputing backup password fingerprint start to work again.
me
Can i install xposed for G906S?
rm-223_bp said:
Seem private mode error ��
Click to expand...
Click to collapse
I don't use private mode but I will take a look at it.
Kindly please Pm (Personal Message) me and I can guide you step by step
fawadshah33 said:
Thanks man. It is the coolest rom with very excellent battery time. I have used many other roms for g906s even the stock but all of them heatup the phone.
And no i wont call you a noob. You did an excellent work here.
CHEERS your rom is cool in this respect.:good::good::good::good::good::good:
---------- Post added at 02:53 PM ---------- Previous post was at 02:48 PM ----------
Fingerprint sensor is working but when after booting ask for the backup password. After inputing backup password fingerprint start to work again.
me
Click to expand...
Click to collapse
Thanks dear for your kind words, I will look into it soon. Thanks for the feedback
lvd0392 said:
Can i install xposed for G906S?
Click to expand...
Click to collapse
No you cant because this Stock Rom is Odex.
For xposed you need Deodex Rom

Help!My OPO cannot flash ROM with recovery.

The Screenshot is below. I got stuck in the H2OS 2.0 so I flash the cos12 to save it from bricking. Then I flash the TWRP. When I wanted to flash a CM13,the problem in the screenshot occurred. Need some Help here.
Help,PLZ
I don't have another phone.I gotta fix this as soon as possible in case I don't miss any important phone calls. plz. Somebody gives me a hand.
The problem is that you're not installing the TWRP flashable rom.
See that the zip file of the CM13 build you tried to install is called cm13......bacon-signed-fastboot......zip. So you're trying to install a fastboot rom with a custom recovery, instead of trying to install a custom rom for a custom recovery. That's why TWRP doesn't found any meta-inf folder.
When downloading the rom in the official web be sure to download the one compatible with custom recoveries.
mustang_ssc said:
The problem is that you're not installing the TWRP flashable rom.
See that the zip file of the CM13 build you tried to install is called cm13......bacon-signed-fastboot......zip. So you're trying to install a fastboot rom with a custom recovery, instead of trying to install a custom rom for a custom recovery. That's why TWRP doesn't found any meta-inf folder.
When downloading the rom in the official web be sure to download the one compatible with custom recoveries.
Click to expand...
Click to collapse
Okay,Thanks. But when I tried another ROM (NucleaRom-V2.1.4-BETA[7.0]-bacon-20161011-0245.zip) ,I failed again. It occurred error 7. The TWRP is universal in many ROMs,right?I used to installed many with it successfully.However, I failed again and again this time.
SimonYJB said:
Okay,Thanks. But when I tried another ROM (NucleaRom-V2.1.4-BETA[7.0]-bacon-20161011-0245.zip) ,I failed again. It occurred error 7. The TWRP is universal in many ROMs,right?I used to installed many with it successfully.However, I failed again and again this time.
Click to expand...
Click to collapse
The 7 error use to happen when you get a bad download and there is missing data. You can compare the md5 of the rom to check if there are missing data or simply download it again, or try another rom.
Also i suggest you to use the latest TugaPower TWRP.
mustang_ssc said:
The 7 error use to happen when you get a bad download and there is missing data. You can compare the md5 of the rom to check if there are missing data or simply download it again, or try another rom.
Also i suggest you to use the latest TugaPower TWRP.
Click to expand...
Click to collapse
Actually,I'm using the latest TeamWin - TWRP. Here is the screenshot. I downloaded the cm13 official but it didn't work too. Could you give a guide to get a Tugapower TWRP? Maybe it will work with the TugaPower TWRP.
SimonYJB said:
Actually,I'm using the latest TeamWin - TWRP. Here is the screenshot. I downloaded the cm13 official but it didn't work too. Could you give a guide to get a Tugapower TWRP? Maybe it will work with the TugaPower TWRP.
Click to expand...
Click to collapse
Did you do wipes (system, data, cache and dalvik cache) before flashing the roms?
mustang_ssc said:
Did you do wipes (system, data, cache and dalvik cache) before flashing the roms?
Click to expand...
Click to collapse
yea,of course. This problem began at my last ROM(H2OS V2.0.1). Is it the main reason? Before that ROM ,everything goes well.
SimonYJB said:
yea,of course. This problem began at my last ROM(H2OS V2.0.1). Is it the main reason? Before that ROM ,everything goes well.
Click to expand...
Click to collapse
Well, honestly i don't know.
I would suggest you to check if the files you have downloaded are not corrupted in case the computer where you're downloading the roms is corrupt them, i experienced that case. So you can check md5 following this guide: http://forums.androidcentral.com/optimus-v-rooting-roms-hacks/113984-what-md5-how-use-verify-your-download.html
And the TWRP i suggested you is here: http://forum.xda-developers.com/oneplus-one/development/unofficial-twrp-3-0-x-tugapower-t3398366. You can install it though fastboot or try with the current recovery you have.
mustang_ssc said:
Well, honestly i don't know.
I would suggest you to check if the files you have downloaded are not corrupted in case the computer where you're downloading the roms is corrupt them, i experienced that case. So you can check md5 following this guide: http://forums.androidcentral.com/optimus-v-rooting-roms-hacks/113984-what-md5-how-use-verify-your-download.html
And the TWRP i suggested you is here: http://forum.xda-developers.com/oneplus-one/development/unofficial-twrp-3-0-x-tugapower-t3398366. You can install it though fastboot or try with the current recovery you have.
Click to expand...
Click to collapse
Thank you very much. I really appreciate it. I'll try as you say.Hope the issues can be solved.:good:

[Rom] Tizen Rom V2.0 Nougat H850 20A OPEN EU Fast and Stable [03.12.2016]

Today, I shares my new rom to all of you. I hope you will enjoy with it
Changelog
- Base rom H850 20a OPEN EU
- Aroma Installer
- Debloat app System
- Set Wallpaper LG V20
- Set Lockscreens LG 20
- Add Dobly option in music setting
- Add Home UX4, with add widget on Smart bulletin
- Add Google Caculator in LG V20 rom
- Add LGEmail.apk
- Add LGTask.apk
- Transperant widget on Home UX5, UX4
- Navigation bar 32 height
- Sync Navigation and Status bar color system apps
- Add Smart Doctor
- Rooted after flash rom
- More.....
INSTALLATION GUIDE
- LGup for updated to Nougat 7.0
- Install TWRP Recovery 3.0.2.1 : TWRP (thanks @jcadduono)
- Download rom : https://drive.google.com/file/d/0Bxzxv3DgqkRbOFRnVmZNRU05Ym8/view?usp=sharing
MD5 : d11967d28e9f8e53d3f1c155bbe7d927
- Copy to Internal storage or ext sdcard
- Enter to recovery
- Install rom and follow steps in aroma installer
- Reboot
- Setup and Enjoy
Thanks :
- @jcadduono
- @superr for kitchen
Bonus : UI with power off screen (upper left), Screen capture (upper right) and center clock. Flash through recovery, no wipe :
https://drive.google.com/file/d/0Bxzxv3DgqkRbeWtXLVdtUWZlR1k/view?usp=sharing
Note :
- Sorry with my bad English
- I AM NOT RESPONSIBLE FOR ANY DAMAGES THAT MAY CAUSE YOUR DEVICE
- Free for donate
Thanks All
You really made another thread just for an update you made on your ROM instead of updating this thread?
http://forum.xda-developers.com/lg-g5/development/rom-tizen-rom-nougat-h850-20a-vdf-date-t3507336/
And i almost see no change in these two, except the base, and maybe some minor things...
problem after install...
Hello, I have a problem, after installing and restart always returns to TWRP recovery and does not start the rom. How can I solve it please? Thank you.
saitek59 said:
Hello, I have a problem, after installing and restart always returns to TWRP recovery and does not start the rom. How can I solve it please? Thank you.
Click to expand...
Click to collapse
Enter twrp recovery, mount, check system, data
And flash dm verify files
cdanthien said:
Enter twrp recovery, mount, check system, data
And flash dm verify files
Click to expand...
Click to collapse
thanks... the result is the same ... I even installed the another rom and the same thing happens ... after the LG image always comes back to TWRP...
saitek59 said:
thanks... the result is the same ... I even installed the another rom and the same thing happens ... after the LG image always comes back to TWRP...
Click to expand...
Click to collapse
backup your data in internal storage, copy rom to external card. enter TWRP recovery, mount, format data. Then flash dm-verify files. Reboot in recovery again, in mount, check tick system, data.
Now you can flash rom
great ROM. works perfect.:good:
cdanthien said:
backup your data in internal storage, copy rom to external card. enter TWRP recovery, mount, format data. Then flash dm-verify files. Reboot in recovery again, in mount, check tick system, data.
Now you can flash rom
Click to expand...
Click to collapse
I do not understand "Then flash dm-verify files"...
saitek59 said:
I do not understand "Then flash dm-verify files"...
Click to expand...
Click to collapse
flash SuperSU and should be the same
saitek59 said:
I do not understand "Then flash dm-verify files"...
Click to expand...
Click to collapse
Flash this file
https://idlekernel.com/fun-stuff-trust-me/no-verity-opt-encrypt.zip
cdanthien said:
Flash this file
https://idlekernel.com/fun-stuff-trust-me/no-verity-opt-encrypt.zip
Click to expand...
Click to collapse
Impossible ... everything installs well but on rebooting for the first time after installing the rom always comes back to twrp ... I do not know what I can do
solved, I have reinstalled the rom original and I started of 0 following the manual. Thanks to all and excellent rom.
saitek59 said:
Impossible ... everything installs well but on rebooting for the first time after installing the rom always comes back to twrp ... I do not know what I can do
Click to expand...
Click to collapse
I had a similar issue and had to LGUP a clean 20a, then root/install TWRP and now Tizen v2.0 running nicely - looks good and I like the transparent widgets on the homepage especially!
Gmobilize said:
You really made another thread just for an update you made on your ROM instead of updating this thread?
http://forum.xda-developers.com/lg-g5/development/rom-tizen-rom-nougat-h850-20a-vdf-date-t3507336/
And i almost see no change in these two, except the base, and maybe some minor things...
Click to expand...
Click to collapse
Yeah, some people want the old version, some want the new. And CyanogenMod doesn't update an old thread whenever they update to a new version.
nima0003 said:
Yeah, some people want the old version, some want the new. And CyanogenMod doesn't update an old thread whenever they update to a new version.
Click to expand...
Click to collapse
I would understand, but it is barely an update, thats my point, with cm its done because of each ROM having different android versions, imo in this case ita quite pointless just to fill the dev section.
Gmobilize said:
I would understand, but it is barely an update, thats my point, with cm its done because of each ROM having different android versions, imo in this case ita quite pointless just to fill the dev section.
Click to expand...
Click to collapse
Yes, this ROM is based on Android 7 and the precious version was based on 6.
nima0003 said:
Yes, this ROM is based on Android 7 and the precious version was based on 6.
Click to expand...
Click to collapse
seriously i dont wanna get rude but wtf, where do you see android 6?
http://forum.xda-developers.com/lg-g5/development/rom-tizen-rom-nougat-h850-20a-vdf-date-t3507336/
Do i have to Update to Nougat First over LG up when coming from genesis 1.3 marshmallow?
Our can I maybe just flash the New bootloader?
Gesendet von meinem LG-H850 mit Tapatalk
Rallyharry said:
Do i have to Update to Nougat First over LG up when coming from genesis 1.3 marshmallow?
Our can I maybe just flash the New bootloader?
Gesendet von meinem LG-H850 mit Tapatalk
Click to expand...
Click to collapse
flash new bootloader and modem first, then flash ROM
but I do suggest an update to N via LGUP first
Gmobilize said:
seriously i dont wanna get rude but wtf, where do you see android 6?
http://forum.xda-developers.com/lg-g5/development/rom-tizen-rom-nougat-h850-20a-vdf-date-t3507336/
Click to expand...
Click to collapse
Oh, I never knew that existed, I was talking about the 6 version thread.

How to keep twrp and install a custom ROM!

How to keep twrp, installing a custom ROM.
Always use official twrp:?
https://t.me/XiaomiMiA1ClouD/206
Let's say you are in aokp and want to install Los15.1.
You do it this way...
You do all wipes Data,system,boot, internal.
Next you flash the ROM and last official twrp zip.
Reboot to recovery and flash gapps and magisk.
Reboot to system and enjoy!
:This method is to keep the twrp without having to use the pc:
Tested on last released ROMs.
More on: https://telegram.me/MIA1NEWSINF
Sorry didn't read the title neatly. Post Deleted
guy_infinity said:
Sorry didn't read the title neatly. Post Deleted
Click to expand...
Click to collapse
Why?
hugor671 said:
Why?
Click to expand...
Click to collapse
I read the title and wrote a post. Then I read it again, and found out that I was wrong. So deleted the post.
BTW, I was able to install a custom ROM without wiping Internal. It didn't give me any issues.

Categories

Resources