My lg g3 d850 stucked at lg logo and when i try to flash a stock rom using lg flash tool i got this :
Fail to get Mini OS Status
Fail !!! Factory_BootComplete()
00000064
i am using this LGD850AT-01-V10d-310-410-JUN-19-2014+0 tot and the dll is LGD850_20140613_LGFLASHv160
gogovd said:
My lg g3 d850 stucked at lg logo and when i try to flash a stock rom using lg flash tool i got this :
Fail to get Mini OS Status
Fail !!! Factory_BootComplete()
00000064
i am using this LGD850AT-01-V10d-310-410-JUN-19-2014+0 tot and the dll is LGD850_20140613_LGFLASHv160
Click to expand...
Click to collapse
That error message can be Normal.. Anything after 80% it's done flashing and is normal to fail. But the phone should still boot. Were you running MM 6.0 before? And did you choose board_dl on the tot selection screen?
hyelton said:
That error message can be Normal.. Anything after 80% it's done flashing and is normal to fail. But the should still boot. Were you running MM 6.0 before? And did you choose board_dl on the tot selection screen?
Click to expand...
Click to collapse
It was on android kitkat and get in this stane after installing a recovery , when i chose board dl it gets to 89 % and then usb port open fail , and the last time was on update dl ,
gogovd said:
It was on android kitkat and get in this stane after installing a recovery
Click to expand...
Click to collapse
Choose board_dl and reflash and update me how it goes
hyelton said:
Choose board_dl and reflash and update me how it goes
Click to expand...
Click to collapse
Again gets to 89 % and then it boot loops , a did a flash using the same tot and the lgup program and refurbish mode , and went to 100% said complete but bootloops
gogovd said:
Again gets to 89 % and then it boot loops , a did a flash using the same tot and the lgup program and refurbish mode , and went to 100% said complete but bootloops
Click to expand...
Click to collapse
You may have a hard brick then
I encountered similar issue where my Cat6 failed at 89 percent. What i noticed was causing it to fail was "Com Port" number changed from 41 to 10.. Uninstall lg drivers and flashtool.. Restart your pc and reinstall everything again. Change the port number to 41 (hopes u understand this how to do it) And flash the tot file... You should be back to stock [emoji3]
Sent from my LG-F460L using Tapatalk
---------- Post added at 07:50 AM ---------- Previous post was at 07:38 AM ----------
Another trick i tried was, flashed kitkat tot file as it got bootlooped i flashed Lp kdz right after that and it loaded the os .. This another alternate and one thing your device is not hard bricked untill u r accessing Donwload mode [emoji3]
Sent from my LG-F460L using Tapatalk
guys ive flashed the tot file through flashtool many times but after it reboots it goes to the green android quickly and then bootloops..tried many times to flash and it seems successful until.the reboot.. i have also got minios=2 error many times any help much apprecited
Sent from my SAMSUNG-SM-N920A using Tapatalk
Sent from my LG-F460L using Tapatalk
---------- Post added at 01:26 PM ---------- Previous post was at 01:23 PM ----------
trident76 said:
guys ive flashed the tot file through flashtool many times but after it reboots it goes to the green android quickly and then bootloops..tried many times to flash and it seems successful until.the reboot.. i have also got minios=2 error many times any help much apprecited
Sent from my SAMSUNG-SM-N920A using Tapatalk
Click to expand...
Click to collapse
If u succesfuly flash the tot then try kdz file like LP.. This might help you
Sent from my LG-F460L using Tapatalk
is there a kdz for d850?
Sent from my SAMSUNG-SM-N920A using Tapatalk
trident76 said:
is there a kdz for d850?
Sent from my SAMSUNG-SM-N920A using Tapatalk
Click to expand...
Click to collapse
Yes there is
Sent from my LG-F460L using Tapatalk
imran.khalil said:
Yes there is
Sent from my LG-F460L using Tapatalk
Click to expand...
Click to collapse
ok my problem is that because its in bootloop no driver is loaded in windows and lgup doesnt detect the phone..if i start it in download mode only tge lg modem driver is loaded and still not detected
Sent from my SAMSUNG-SM-N920A using Tapatalk
If you drivers are not loaded how you flash a tot file then?
Sent from my LG-F460L using Tapatalk
imran.khalil said:
Yes there is
Sent from my LG-F460L using Tapatalk
Click to expand...
Click to collapse
Hello I have the same problem can u tell where to find the KDZ for d850 i didnt found it
trident76 said:
is there a kdz for d850?
Sent from my SAMSUNG-SM-N920A using Tapatalk
Click to expand...
Click to collapse
It's been stated many times, there is no Kdz available. Only tot file is available for flashing.
gogovd said:
My lg g3 d850 stucked at lg logo and when i try to flash a stock rom using lg flash tool i got this :
Fail to get Mini OS Status
Fail !!! Factory_BootComplete()
00000064
i am using this LGD850AT-01-V10d-310-410-JUN-19-2014+0 tot and the dll is LGD850_20140613_LGFLASHv160
Click to expand...
Click to collapse
Hi i have the same problem like you can you tell if you resolved the problem and how ?
atarutof said:
Hi i have the same problem like you can you tell if you resolved the problem and how ?
Click to expand...
Click to collapse
Did you choose board_dl?
Sent from my iPhone using Tapatalk
Related
i just tried on my lg g pro 2 f350l this method worked 100%
1-install stump-root v1.2.0 apk file on mobile
2-hit grind button
3-after completion install super user from play store
and that,s it
your lg g pro 2 f350l rooted
Help
Any one help me i tried to install recovery using Autorec.apk
Now my device is not booting , no lg logo nothing is showing sign of display blink
Please help what could i do?
Bruteforced this on my D838 16GB and it works! Very stoked. Should've uploaded how it did it to their server so if you have the 4.4.2 D838 16gb 10b it should just work.
Thanks for the link!
already try it..and wow..it work 100%..thanks for the link..i search for this long time...
Sent from my LG-D838 using XDA Free mobile app
Anyone know..how to get back stock rom lg g pro2??
Sent from my LG-F350L
lensowhite said:
Anyone know..how to get back stock rom lg g pro2??
Sent from my LG-F350L
Click to expand...
Click to collapse
In this program LG Phone From you will find link with .kdz for your phone. Download .kdz to your PC and use LG Flash tool 2014 to flash your phone. Done. Your phone is like out of the box.
Thanks..
Sent from my LG-F350L
root
thanks! i finally rooted my device.
now i can flash cn mod v5plus..
Thanks
---------- Post added at 02:40 PM ---------- Previous post was at 02:32 PM ----------
When stump asked me to reboot set to complete root my phone crashed on home screen, but on next restart it statred with no error. Is this crash normal for first reboot after stump root or i m the only one?
this apk not work on D83810f-TWN-XX
any solution guys..
Sent from my LG-D838 using XDA Free mobile app
Can this root be undone?
I have this phone F350L but I get unsupported device-? Should I bruteforce or is this risky to do??
I've tried on my LG G Pro 2 F350K10u (4.4.2) with this app "Stump-v1.2.0.apk"
100% Worked, Root Access is Properly Installed.
Tried it too on F350L and it worked!!!!
hi guys...
this method is for 4.4.2 rite?
how do i root for lollipop 5.0.1 stock rom?
thanks
firdaus4748 said:
hi guys...
this method is for 4.4.2 rite?
how do i root for lollipop 5.0.1 stock rom?
thanks
Click to expand...
Click to collapse
Use Kingroot app
Sent from my LG-D838
ubabic said:
Use Kingroot app
Sent from my LG-D838
Click to expand...
Click to collapse
thanks man...will try it
UPDATE: I have tested the Sprint LS996 ZV8 TOT, and it works great. The ATT H950 11z TOT has also been tested by one user, who was successfully able to switch back from H950PR.
hyelton has uploaded the files to his server:
ATT H950 11z TOT: http://storagecow.eu/index.php?dir=Xda/LG+G+Flex+2/ATT+H950/
Sprint LS996 ZV8 TOT: http://storagecow.eu/index.php?dir=Xda/LG+G+Flex+2/Sprint/
_____________________________________________________________________________________________________
Finally, we have the TOT file for Sprint LS996 ZV8 5.1.1, thanks to Ganbold and heylton. Here is the link to the original thread. Now someone on XDA has to test it.
I also found an ATT H950 11z TOT. Here is the download link. Again, this one also has to be tested.
password? upload to other site....
pelelademadera said:
password? upload to other site....
Click to expand...
Click to collapse
Will download and upload it to my server now
Here is The Sprint G Flex 2 TOT - http://oceanhost.eu/hsjpdmctwfd4/LGLS996-ZV8-tot.7z.html
hyelton said:
Will download and upload it to my server now
Here is The Sprint G Flex 2 TOT - http://oceanhost.eu/hsjpdmctwfd4/LGLS996-ZV8-tot.7z.html
Click to expand...
Click to collapse
Great, thanks!
Enviado desde mi LG-H955 mediante Tapatalk
Please upload the tot for h950 to a different Server please
fyter said:
Please upload the tot for h950 to a different Server please
Click to expand...
Click to collapse
I'd suggest you see my post above... Im already doing that.
---------- Post added 7th March 2016 at 12:21 AM ---------- Previous post was 6th March 2016 at 11:25 PM ----------
anseroid said:
Finally, we have the TOT file for Sprint LS996 ZV8 5.1.1, thanks to Ganbold and heylton. Here is the link to the original thread. Now someone on XDA has to test it.
I also found an ATT H950 11z TOT. Here is the download link. Again, this one also has to be tested.
Click to expand...
Click to collapse
pelelademadera said:
password? upload to other site....
Click to expand...
Click to collapse
fyter said:
Please upload the tot for h950 to a different Server please
Click to expand...
Click to collapse
Here you all go! on my server - http://storagecow.eu/index.php?dir=Xda/LG+G+Flex+2/ATT+H950/
hyelton said:
I'd suggest you see my post above... Im already doing that.
---------- Post added 7th March 2016 at 12:21 AM ---------- Previous post was 6th March 2016 at 11:25 PM ----------
Here you all go! on my server - http://storagecow.eu/index.php?dir=Xda/LG+G+Flex+2/ATT+H950/
Click to expand...
Click to collapse
Great, tomorrow I will play with it
Enviado desde mi LG-H955 mediante Tapatalk
Thank you very much!!!
I am running the 5.1.1 h950pr software on my at&t h950 g Flex 2, because it was difficult getting the update from at&t. I would prefer to have the 5.1.1 11z at&t update, if I were to download and flash this at&t TOT file, is it likely to work? Or will I brick my device do you think?
steven_computer_guy said:
I am running the 5.1.1 h950pr software on my at&t h950 g Flex 2, because it was difficult getting the update from at&t. I would prefer to have the 5.1.1 11z at&t update, if I were to download and flash this at&t TOT file, is it likely to work? Or will I brick my device do you think?
Click to expand...
Click to collapse
It has been tested to work by one user, who was able to switch back from the H950PR ROM. See this.
Probably stupid question, but I should have no problem going from the original AT&T 5.0.1 to this latest 5.1.1 using this method correct?
I cannot believe my freaking luck. Right after my phone gets hard bricked, I find the one thing that can fix it. What can I do now. LG tells me that I have to have the Proof of Purchase or they may not be able to fix it, but it only said that on the printing slip. Is their anyway to save my phone with this or is it off to LG I go?
XTheArrowX said:
I cannot believe my freaking luck. Right after my phone gets hard bricked, I find the one thing that can fix it. What can I do now. LG tells me that I have to have the Proof of Purchase or they may not be able to fix it, but it only said that on the printing slip. Is their anyway to save my phone with this or is it off to LG I go?
Click to expand...
Click to collapse
I'm on the same boat, but I'm on another country. If you know anything please let us know, there's a lot of us in the same situation.
Error h950pr 5.1.1 to h950 11z tot
CrossDL [H950PR] to [H950]. SWversion[H955AT-00-V15a-GLOBAL-COM-MAY-14-2015+1][17:10:58] ¡Ú¡Ú ERROR REASON : LAF_ERROR_INVALID_INPUT_FILE
I am in normal rooted zv9,can i flash this tot file or not?
Sent from my LGLS996 using Tapatalk
larrylong said:
I am in normal rooted zv9,can i flash this tot file or not?
Sent from my LGLS996 using Tapatalk
Click to expand...
Click to collapse
Why would you want to flash it?
Is your phone in bootloop or semi bricked?
If the answer is no to both questions then you dont need to flash this.
Thks.i just want to try just in case
Sent from my LGLS996 using Tapatalk
joefloater said:
Probably stupid question, but I should have no problem going from the original AT&T 5.0.1 to this latest 5.1.1 using this method correct?
Click to expand...
Click to collapse
I used the ATT H950 tot to go straight from out of the box 5.0.1 to 5.1.1 (I'm on tmobile so no OTA for me). Thank you op!
Used this TOT to unbrick my soft-bricked 5.1.1 H950PR using LGFlashTool. Ofcourse I find this fix after getting a G3 as a replacement but thank you!
XTheArrowX said:
I cannot believe my freaking luck. Right after my phone gets hard bricked, I find the one thing that can fix it. What can I do now. LG tells me that I have to have the Proof of Purchase or they may not be able to fix it, but it only said that on the printing slip. Is their anyway to save my phone with this or is it off to LG I go?
Click to expand...
Click to collapse
This will only be useful if you can get in to download mode.
On 5.1.1 both screens work great.
If I flash 6.0.1, only the old screen works, the new screen is gets stuck in a bootloop.
WIth CM13 only the old screen works...
Have any of you faced this issue? If yes, can you please tell me how to fix this? I was trying not to create a new thread, but after 8 hours trying to fix this I'm getting frustrated...
Maybe you have the wrong screen? There are 2 screen suppliers for osprey.
I also replaced my screen now it duplicate and I am not able to use cm13 or ANY M.M based rom
Sent from my Moto G 2015 using XDA-Developers mobile app
Thank you guys for replying, I wasn't getting notifications on this...
HelpMeruth said:
Maybe you have the wrong screen? There are 2 screen suppliers for osprey.
Click to expand...
Click to collapse
I got it from eBay: http://www.ebay.co.uk/itm/221994670691
The model is XT1541, so I got a generic one, but to my surprise it only works with 5.1.1, not 6.0 or up or CM13...
Piyush Garg said:
I also replaced my screen now it duplicate and I am not able to use cm13 or ANY M.M based rom
Click to expand...
Click to collapse
Did you buy a generic screen too?
Martins2759 said:
Thank you guys for replying, I wasn't getting notifications on this...
I got it from eBay: http://www.ebay.co.uk/itm/221994670691
The model is XT1541, so I got a generic one, but to my surprise it only works with 5.1.1, not 6.0 or up or CM13...
Did you buy a generic screen too?
Click to expand...
Click to collapse
No.
Do u ?
Sent from my Moto G 2015 using XDA-Developers mobile app
---------- Post added at 04:48 PM ---------- Previous post was at 04:47 PM ----------
Piyush Garg said:
No.
Do u ?
Sent from my Moto G 2015 using XDA-Developers mobile app
Click to expand...
Click to collapse
Bro e-bay sells 2nd hand product's. It might be original but 2nd hand
Sent from my Moto G 2015 using XDA-Developers mobile app
Piyush Garg said:
No.
Do u ?
Sent from my Moto G 2015 using XDA-Developers mobile app
---------- Post added at 04:48 PM ---------- Previous post was at 04:47 PM ----------
Bro e-bay sells 2nd hand product's. It might be original but 2nd hand
Sent from my Moto G 2015 using XDA-Developers mobile app
Click to expand...
Click to collapse
It could be used yes but it works with 5.1.1 but not with 6.0 and up, so it's not a problem with the screen but rather the Firmware that's blocking it... I read somewhere CM13 would work but it didn't, so I don't know what to do anymore... :/
Enviado do meu Nexus 6 através de Tapatalk
Martins2759 said:
It could be used yes but it works with 5.1.1 but not with 6.0 and up, so it's not a problem with the screen but rather the Firmware that's blocking it... I read somewhere CM13 would work but it didn't, so I don't know what to do anymore... :/
Enviado do meu Nexus 6 através de Tapatalk
Click to expand...
Click to collapse
Yes because it contains 5.1.1 drivers.
I have same problem but my boot up but touch don't work.
Sent from my Moto G 2015 using XDA-Developers mobile app
Piyush Garg said:
Yes because it contains 5.1.1 drivers.
I have same problem but my boot up but touch don't work.
Sent from my Moto G 2015 using XDA-Developers mobile app
Click to expand...
Click to collapse
Is there any way to keep the drivers with 6.0? :/
Enviado do meu Nexus 6 através de Tapatalk
Flash the 6.0 / 6.0.1 Factory Firmware image exactly as instructed, starting with a Factory reset in Stock Recovery.
http://forum.xda-developers.com/2015-moto-g/general/guide-fastboot-flashing-factory-t3187750http://forum.xda-developers.com/2015-moto-g/general/index-moto-g-factory-firmware-images-t3169639
lost101 said:
Flash the 6.0 / 6.0.1 Factory Firmware image exactly as instructed, starting with a Factory reset in Stock Recovery.
http://forum.xda-developers.com/2015-moto-g/general/guide-fastboot-flashing-factory-t3187750http://forum.xda-developers.com/2015-moto-g/general/index-moto-g-factory-firmware-images-t3169639
Click to expand...
Click to collapse
I flashed 6.0.1 successfully, working with the old screen, but when I switch to the new screen it just bootloops... With the new screen I can get to the bootloader but not to recovery... With the old one everything works, but the screen is shattered so I can't use it daily...
Martins2759 said:
I flashed 6.0.1 successfully, working with the old screen, but when I switch to the new screen it just bootloops... With the new screen I can get to the bootloader but not to recovery... With the old one everything works, but the screen is shattered so I can't use it daily...
Click to expand...
Click to collapse
I have did that but my pH get booted up and every things working great but when the setup started to select the language and all that but touch did not work as vol+ and - key were working.
Sent from my Moto G 2015 using XDA-Developers mobile app
Martins2759 said:
I flashed 6.0.1 successfully, working with the old screen, but when I switch to the new screen it just bootloops... With the new screen I can get to the bootloader but not to recovery... With the old one everything works, but the screen is shattered so I can't use it daily...
Click to expand...
Click to collapse
I just want to make absolutely sure you are flashing the Firmware Image correctly. Did you erase userdata also when flashing? It is possible to port some aspects of the 5.1.1 firmware to 6.0 / 6.0.1 - hopefully specifically related to display / LCD. A custom 6.0 / 6.0.1 Kernel might also be a workaround. It might be worth mentioning this problem to a Kernel Developer in one of their threads.
lost101 said:
I just want to make absolutely sure you are flashing the Firmware Image correctly. Did you erase userdata also when flashing? It is possible to port some aspects of the 5.1.1 firmware to 6.0 / 6.0.1 - hopefully specifically related to display / LCD. A custom 6.0 / 6.0.1 Kernel might also be a workaround. It might be worth mentioning this problem to a Kernel Developer in one of their threads.
Click to expand...
Click to collapse
I followed your tutorial and wiped userdata, yes I was confirming every file, the number of system images, etc. I'm used to flashing though fastboot
Is it possible to OTA using the factory images like on a nexus or is wiping userdata always a must?
I would try the OTA from 5.1.1 to 6.0 to see if it works...
Enviado do meu Nexus 6 através de Tapatalk
@Martins2759 - I have a warning in my Firmware threads to never accept an OTA Update if you ever downgrade. I would advise against ignoring that warning.
Was about to create a thread, but we have the same problem (but i have a xt1544). There is a way to downgrade to LP with te locked bootloader?
Is now screen working with M.M
Sent from my Moto G 2015 using XDA-Developers mobile app
After some custom rom installation , my phone started showing imei null and unknown baseband version .
Have tried all the tutorials available online . Unfortunately didn't have a backup . Tried flashing different Roms (stock as well as custom ) , have tried and flashed different modems as well . When I try and enter the service or engineering mode , all I get is a blank page . Have tried almost evrything . And I am not able to find the NVRAM folder even after rooting . I guess that could be the issue . Can someone share their NVRAM folder or guide me to an alternative solution . Thnks .
Sent from my XT1635-02 using XDA-Developers Legacy app
U can restore efs partition from backup if any custom rom have made backup
Sent from my SM-A9000 using XDA Premium 4 mobile app
Mihiranpura said:
U can restore efs partition from backup if any custom rom have made backup
Sent from my SM-A9000 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
He said he doesn't have a backup. Read carefully
Sent from my N900- Note 3 using Tapatalk
OP you need a service centre now .
You have no EFS backup to restore IMEI .
harishdhandev said:
After some custom rom installation , my phone started showing imei null and unknown baseband version .
Have tried all the tutorials available online . Unfortunately didn't have a backup . Tried flashing different Roms (stock as well as custom ) , have tried and flashed different modems as well . When I try and enter the service or engineering mode , all I get is a blank page . Have tried almost evrything . And I am not able to find the NVRAM folder even after rooting . I guess that could be the issue . Can someone share their NVRAM folder or guide me to an alternative solution . Thnks .
Sent from my XT1635-02 using XDA-Developers Legacy app
Click to expand...
Click to collapse
download samfirmware in your computer
download phone info in your phone
follow the steps & you will done
Regards,2
foreiner said:
download samfirmware in your computer
download phone info in your phone
follow the steps & you will done
Regards,2
Click to expand...
Click to collapse
Post makes no sense .
What is samfirmware ?? . Or do you mean Stock Firmware. and how will phone info restore IMEI ??
Note OP has already flashed stock firmware etc .
Sent from my SM-N930F using XDA-Developers Legacy app
JJEgan said:
Post makes no sense .
What is samfirmware ?? . Or do you mean Stock Firmware. and how will phone info restore IMEI ??
Note OP has already flashed stock firmware etc .
Sent from my SM-N930F using XDA-Developers Legacy app
Click to expand...
Click to collapse
He means Samsung firmware.
Sent from my N900- Note 3 using Tapatalk
---------- Post added at 03:17 PM ---------- Previous post was at 03:17 PM ----------
Dinara° said:
He means Samsung firmware.
Sent from my N900- Note 3 using Tapatalk
Click to expand...
Click to collapse
That won't fix it
Sent from my N900- Note 3 using Tapatalk
Well to be honest you are totally ****ed. How the hell you survive. Same happened to me when i had note 2 and didnt have a backup. Did everything but finally went to samsung store.
P.S. Those money suckers charged me around $107 or around ₹7300 and told me they had to replace the whole mother board (which they never do in this case and just fool people)
vab101 said:
Well to be honest you are totally ****ed. How the hell you survive. Same happened to me when i had note 2 and didnt have a backup. Did everything but finally went to samsung store.
P.S. Those money suckers charged me around $107 or around ₹7300 and told me they had to replace the whole mother board (which they never do in this case and just fool people)
Click to expand...
Click to collapse
What do they do then?
Sent from my N900- Note 3 using Tapatalk
JJEgan said:
Post makes no sense .
What is samfirmware ?? . Or do you mean Stock Firmware. and how will phone info restore IMEI ??
Note OP has already flashed stock firmware etc .
Sent from my SM-N930F using XDA-Developers Legacy app
Click to expand...
Click to collapse
Nop "samfirmware downloader" will download the original stock for his region
google it.
Dinara° said:
What do they do then?
Click to expand...
Click to collapse
They just tells you that they changed the mother board but actually they just look up for the imei in their database of your phone and manually put it using some private software and Samsung servers which we in any case cant use . Its a matter of 10 to 20 min but took them 9 days to do it.
Samsung India service centers are damn slow
vab101 said:
They just tells you that they changed the mother board but actually they just look up for the imei in their database of your phone and manually put it using some private software and Samsung servers which we in any case cant use . Its a matter of 10 to 20 min but took them 9 days to do it.
Samsung India service centers are damn slow
Click to expand...
Click to collapse
This is shows how important it is to backup Efs. Here in Russia you won't even find a Samsung store lol
Sent from my N900- Note 3 using Tapatalk
Dinara° said:
This is shows how important it is to backup Efs. Here in Russia you won't even find a Samsung store lol
Click to expand...
Click to collapse
Hahha that's why i said you you are ****ed and how do you survive without a backup!!
Your 1st time?
My brother screwed up the phone. He is new to all this . If it's possible for someone to share the nvram folder , I could try something from that
Sent from my XT1635-02 using XDA-Developers Legacy app
Can someone do that? This dude is crying
Sent from my N900- Note 3 using Tapatalk
---------- Post added at 09:53 AM ---------- Previous post was at 09:52 AM ----------
vab101 said:
Hahha that's why i said you you are ****ed and how do you survive without a backup!!
Your 1st time?
Click to expand...
Click to collapse
No mines alright. I was just telling
Sent from my N900- Note 3 using Tapatalk
harishdhandev said:
My brother screwed up the phone. He is new to all this . If it's possible for someone to share the nvram folder , I could try something from that
Sent from my XT1635-02 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Bro fear none, I had this issue once on my note 3. I didn't make any backup or anything and I ended up with a note 3 that doesn't have a sim card lol. Until one day I flashed a rom that i had flashed before and it turned out that that rom had made back up of efs but I didn't know. Anyways hope you flashed roms before losing it pal.
Dinara° said:
Can someone do that? This dude is crying
Sent from my N900- Note 3 using Tapatalk
---------- Post added at 09:53 AM ---------- Previous post was at 09:52 AM ----------
No mines alright. I was just telling
Click to expand...
Click to collapse
He down the bottom i guess he will have to go to a service center
Just help
Hei. I also getting in your case in two weeks before i buy note 3 .. My ex phone is samsung S3, and i know it's will happen if you downgrade your firmware.. Then i flashed new firmware from sammobile.com but nothing happen in my signal.. After that i find another way .. I found a thread in xda . they share modem patch for s3 .. And then i just flash my s3 to lastest rom in my country then root and instal cwm then flash the patch.. After reboot my signal full and normal again .
In this case you can flash lastest firmware for note 3. And search modem flash .. Or you can put juat the modem from firmware to odin one by one .
Sorry my english so bad
---------- Post added at 12:35 PM ---------- Previous post was at 12:30 PM ----------
You can find the modem from here..
Not download full firmware. Just flashable patch modem
https://forum.xda-developers.com/showthread.php?t=2475714
harishdhandev said:
After some custom rom installation , my phone started showing imei null and unknown baseband version .
Have tried all the tutorials available online . Unfortunately didn't have a backup . Tried flashing different Roms (stock as well as custom ) , have tried and flashed different modems as well . When I try and enter the service or engineering mode , all I get is a blank page . Have tried almost evrything . And I am not able to find the NVRAM folder even after rooting . I guess that could be the issue . Can someone share their NVRAM folder or guide me to an alternative solution . Thnks .
Sent from my XT1635-02 using XDA-Developers Legacy app
Click to expand...
Click to collapse
well atleast, there are some apps that can change the imei no.s hope it helps you
My G7 XT1962-6 RIVER RETIN updated to Android 10 a few days ago.
Now I'm having a hard time finding the stock firmware d/l: Android 10 build # QPU30.52-16-2 RETIN
The closest I've come is here:
https://mirrors.lolinet.com/firmware/moto/river/official/RETIN/
Anyone have a newer/updated source? Tia...
Zaxx32 said:
My G7 XT1962-6 RIVER RETIN updated to Android 10 a few days ago.
Now I'm having a hard time finding the stock firmware d/l: Android 10 build # QPU30.52-16-2 RETIN
The closest I've come is here:
https://mirrors.lolinet.com/firmware/moto/river/official/RETIN/
Anyone have a newer/updated source? Tia...
Click to expand...
Click to collapse
Try LMSA's Flash Rescue option
https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714
Sent from my Moto E (4) using Tapatalk
sd_shadow said:
Try LMSA's Flash Rescue option
https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714
Sent from my Moto E (4) using Tapatalk
Click to expand...
Click to collapse
No luck...got 'device not recognized' when I entered my serial #...
Thanx anyway tho!
Zaxx32 said:
No luck...got 'device not recognized' when I entered my serial #...
Thanx anyway tho!
Click to expand...
Click to collapse
When it's in fastboot mode?
Doh! Just did a dry run, not connected just to check it out.
Will give it a go tomorrow connected. Fwiw neither 'river' nor 'retin' showed on the file server....
Zaxx32 said:
Doh! Just did a dry run, not connected just to check it out.
Will give it a go tomorrow connected. Fwiw neither 'river' nor 'retin' showed on the file server....
Click to expand...
Click to collapse
Select flash rescue in LMSA, Boot device to fastboot mode, connect to PC
LMSA won't really do anything until a compatible device is connected.
I'll try tomoz...I got booted today! Access Denied...as soon as I logged in! Smh...
https://mirrors.lolinet.com/firmware/moto/river/official/AMZ/
Sent from my SM-G973U1 using XDA Labs
mattmsr82 said:
https://mirrors.lolinet.com/firmware/moto/river/official/AMZ/
Click to expand...
Click to collapse
That's for XT1961-1 Amazon
he has XT1961-6 RetIN
---------- Post added at 07:38 PM ---------- Previous post was at 07:35 PM ----------
https://mirrors.lolinet.com/firmware/moto/river/official/RETIN/
XT1962-6_RIVER_RETIN_10_QPUS30.52-16-2-2_cid50_subsidy-DEFAULT_regulatory-XT1962-6-INDIA_CFC.xml.zip
Try going up a level...
https://mirrors.lolinet.com/firmware/moto/river/official/
Sent from my SM-G973U1 using XDA Labs
mattmsr82 said:
Try going up a level...
https://mirrors.lolinet.com/firmware/moto/river/official/
Sent from my SM-G973U1 using XDA Labs
Click to expand...
Click to collapse
See post #1
Sent from my Moto E (4) using Tapatalk
Snatched it when it finally showed...thx tho! Now if TWRP's Slot A/B handling wasn't causing backup/restore issues...smh
Now the best way to get ROM is getting through LMSA.
It's a guaranteed match of build number.
Enter Rescue mode and restart the phone in bootloader mode.
Observe the download and copy the full ROM zip to somewhere once the download reached 100%
Unpack the ROM and flash everything through fastboot
Fastbootd is NOT required.
I have the India version RETIN.. is it possible for me to flash a US version and if so, which one is it?
sd_shadow said:
That's for XT1961-1 Amazon
he has XT1961-6 RetIN
---------- Post added at 07:38 PM ---------- Previous post was at 07:35 PM ----------
https://mirrors.lolinet.com/firmware/moto/river/official/RETIN/
XT1962-6_RIVER_RETIN_10_QPUS30.52-16-2-2_cid50_subsidy-DEFAULT_regulatory-XT1962-6-INDIA_CFC.xml.zip
Click to expand...
Click to collapse
mrindependent said:
I have the India version RETIN.. is it possible for me to flash a US version and if so, which one is it?
Click to expand...
Click to collapse
I don't know, you should check specs for hardware differences, single/duel sim, NFC...