My phone got soft bricked while i was flashing the rom on my g3. Now whenever i try to flash the stock Firmware through .tot method it goes till 94%. It says "Fail to Get mini OS Status"
It's download mode is working. But when i start the device it goes on to show me LG logo again and again.....
Plz Help me what should i do....
Rafaaaay said:
My phone got soft bricked while i was flashing the rom on my g3. Now whenever i try to flash the stock Firmware through .tot method it goes till 94%. It says "Fail to Get mini OS Status"
It's download mode is working. But when i start the device it goes on to show me LG logo again and again.....
Plz Help me what should i do....
Click to expand...
Click to collapse
What rom was your trying to flash that caused that problem? And did you try choose board_dl in the tot/dll selection screen and flash that way?
hyelton said:
What rom was your trying to flash that caused that problem? And did you try choose board_dl in the tot/dll selection screen and flash that way?
Click to expand...
Click to collapse
I tried to flash the "LGD850AT-01-V10d-310-410-JUN-19-2014"
No I just selected Upgrade_dl.....
Rafaaaay said:
I tried to flash the "LGD850AT-01-V10d-310-410-JUN-19-2014"
No I just selected Upgrade_dl.....
Click to expand...
Click to collapse
Choose board_dl and let me know what happens
hyelton said:
Choose board_dl and let me know what happens
Click to expand...
Click to collapse
It went till 89% Then it said that port open error.
Secondly the Enable XML log should be selected or not?
Rafaaaay said:
It went till 89% Then it said that port open error.
Secondly the Enable XML log should be selected or not?
Click to expand...
Click to collapse
Now remember failing after 80% is normal. Did it boot? Anything after 80% is just rebooting and not part of the flash.
Were you running MM 6.0 before ? If so you'll need to use LGUP
hyelton said:
Now remember failing after 80% is normal. Did it boot? Anything after 80% is just rebooting and not part of the flash.
Were you running MM 6.0 before ? If so you'll need to use LGUP
Click to expand...
Click to collapse
Yes it booted 4-5 times at 89%.
It got bricked when i tried to Install MM 6.0 and now it is in the middle of nowhere.
How can i use LGUP.
Rafaaaay said:
Yes it booted 4-5 times at 89%.
It got bricked when i tried to Install MM 6.0 and now it is in the middle of nowhere.
How can i use LGUP.
Click to expand...
Click to collapse
Just google LGUP . What Mm 6.0 rom did you try to install? There's no 6.0 official for D850
hyelton said:
Just google LGUP . What Mm 6.0 rom did you try to install? There's no 6.0 official for D850
Click to expand...
Click to collapse
I Could not find KDZ Version of G3 D850 Either of stock or lollipop.
Rafaaaay said:
I Could not find KDZ Version of G3 D850 Either of stock or lollipop.
Click to expand...
Click to collapse
That's because there's not. You use a tot file with the tot method or LGUP
hyelton said:
That's because there's not. You use a tot file with the tot method or LGUP
Click to expand...
Click to collapse
On LGUP It is saying Unkown(Model) . Then shows an error sayin u have to chose a known model.
Rafaaaay said:
On LGUP It is saying Unkown(Model) . Then shows an error sayin u have to chose a known model.
Click to expand...
Click to collapse
Download LGUP from my LG G3 back to stock thread. You may had downloaded an old version.
hyelton said:
Download LGUP from my LG G3 back to stock thread. You may had downloaded an old version.
Click to expand...
Click to collapse
Same problem.... I Got it from ur Go Back to Stock But it says that Model Unknown.
I connected the device in download mode. It is showing "910K B3 QEM"
Rafaaaay said:
Same problem.... I Got it from ur Go Back to Stock But it says that Model Unknown.
I connected the device in download mode. It is showing "910K B3 QEM"
Click to expand...
Click to collapse
If it shows that you have a hard brick
hyelton said:
If it shows that you have a hard brick
Click to expand...
Click to collapse
Now What....
But it is starting into download mode and have bootloop on.
In HardBrick it shouldn't do anything.
Rafaaaay said:
Now What....
But it is starting into download mode and have bootloop on.
In HardBrick it shouldn't do anything.
Click to expand...
Click to collapse
Sorry no clue. But that showing up is either hard brick or will require more than just flashing back to stock. I think there is a "unbrick" guide for that in the G3 section.
Rafaaaay said:
Now What....
But it is starting into download mode and have bootloop on.
In HardBrick it shouldn't do anything.
Click to expand...
Click to collapse
@Rafaaaay Dude did you found a fix yet? Really hope you had. If not did you try to reinstall back to stock? This is what I had done when I was stuck in the boot loop issue on one of my nexus device
Related
So I recently updated to Android 6.0 and it worked perfectly. So about 1 month later (today) I get prompted with a message stating there is an update going to install in30 sec. I let it do its thing setting the phone to comeback right when it's booting up(or so I thought) instead it's the boot loop going on over and over. So I remeber the flash tool so I decided to go with that but it didnt work. Is there any fix for the Android 6.0 boot loop on LG g3 d850?
Unveiled Skill said:
So I recently updated to Android 6.0 and it worked perfectly. So about 1 month later (today) I get prompted with a message stating there is an update going to install in30 sec. I let it do its thing setting the phone to comeback right when it's booting up(or so I thought) instead it's the boot loop going on over and over. So I remeber the flash tool so I decided to go with that but it didnt work. Is there any fix for the Android 6.0 boot loop on LG g3 d850?
Click to expand...
Click to collapse
You have to use LGUP since you were on MM.
Sent from my iPhone using Tapatalk
hyelton said:
You have to use LGUP since you were on MM.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Is there any known fix cause I kinda need my phone? It just sucks how carriers treat people who don't buy the newest version of a phone.
hyelton said:
You have to use LGUP since you were on MM.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Didn't work says device unknown
hyelton said:
You have to use LGUP since you were on MM.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
LGUP is only for the D855 Model of the lg g3 I have D850.
Unveiled Skill said:
LGUP is only for the D855 Model of the lg g3 I have D850.
Click to expand...
Click to collapse
LGUP works will ALL models.. And if your running MM LGUP is the only software that's going to work for you
Sent from my iPhone using Tapatalk
hyelton said:
LGUP works will ALL models.. And if your running MM LGUP is the only software that's going to work for you
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Am I doing something wrong then because I keep getting device unknown. I already set com ports to 41 and ran as admin.Is there something I missed.
Unveiled Skill said:
Am I doing something wrong then because I keep getting device unknown. I already set com ports to 41 and ran as admin.Is there something I missed.
Click to expand...
Click to collapse
Your running stock rom right? If your currently running a custom rom you need to first flash a stock based rom based on D850.
Sent from my iPhone using Tapatalk
hyelton said:
Your running stock rom right? If your currently running a custom rom you need to first flash a stock based rom based on D850.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Is there a tutorial of how to flash to a stock Rom?
Unveiled Skill said:
Is there a tutorial of how to flash to a stock Rom?
Click to expand...
Click to collapse
Yes my LG G3 back to stock guide.
hyelton said:
Yes my LG G3 back to stock guide.
Click to expand...
Click to collapse
Link Please. Thank you
Unveiled Skill said:
Is there a tutorial of how to flash to a stock Rom?
Click to expand...
Click to collapse
Unveiled Skill said:
Link Please. Thank you
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2785089
hyelton said:
http://forum.xda-developers.com/showthread.php?t=2785089
Click to expand...
Click to collapse
There are no kdz for at&t. And the 2015 method dosent work as it was the flash tool I tried it says DOWNLOAD FAILED every time I start it up.
Unveiled Skill said:
There are no kdz for at&t. And the 2015 method dosent work as it was the flash tool I tried it says DOWNLOAD FAILED every time I start it up.
Click to expand...
Click to collapse
There is no kdz for AT&T models and never will be. What do you mean by download failed? Need to explain more. Were you running MM? If so that's why as you must use LGUP...
Also make sure your placing the phone in download mode and using a USB 2.0 port. USB 3.0 will not work
Sent from my iPhone using Tapatalk
hyelton said:
There is no kdz for AT&T models and never will be. What do you mean by download failed? Need to explain more. Were you running MM? If so that's why as you must use LGUP...
Also make sure your placing the phone in download mode and using a USB 2.0 port. USB 3.0 will not work
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
When i start the flash in the 2015 method it says DOWNLOAD FAILED in red at the top. So you said if I'm running MM LGUP should work but my phone appears in the unknown and it is in download mode.
Unveiled Skill said:
When i start the flash in the 2015 method it says DOWNLOAD FAILED in red at the top. So you said if I'm running MM LGUP should work but my phone appears in the unknown and it is in download mode.
Click to expand...
Click to collapse
With LGUP have your phone turned on with USB debugging mode enabled.
Sent from my iPhone using Tapatalk
hyelton said:
With LGUP have your phone turned on with USB debugging mode enabled.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
That the problem I have the boot loop after a failed updated so I can't turn the phone on to change settings.
hyelton said:
With LGUP have your phone turned on with USB debugging mode enabled.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Do you think a command sent to the device while it's in download mode could enable usb debugging.
Unveiled Skill said:
Do you think a command sent to the device while it's in download mode could enable usb debugging.
Click to expand...
Click to collapse
USB debugging is for software that's not required in download mode and doesn't have anything to do with download mode. What was you running before? As custom roms will make it show up unknown. And not sure on a fix for that
Sent from my iPhone using Tapatalk
hyelton said:
USB debugging is for software that's not required in download mode and doesn't have anything to do with download mode. What was you running before? As custom roms will make it show up unknown. And not sure on a fix for that
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I Was running lollipop rooted flashed to stock updated to MM then tried to install an OTA update and Boot loop started after
Hi everyone
So i'm having this problem: i'm trying to unroot my g flex 2 v 5.1.1 with a stock kdz file to update it later to marsmallow, but everytime i try to unroot it i got stuck on 9 % on lgup , the phone does go to download mode and i get a green message com 4 but after that it doesn't do anything else.
What should i do? the phone still boots up like usually but can't seem to unroot,
device : H955
tried lg flash tool not working get server error
also tried lg support tool sits at 9% at the upgrading tab same with lgup
Manage to fix it thanks to TheAxiks for sharing his system.img with me
Unroot via the same way as rooting your device with a stock system img
Did you tried Flash Tool (CSE) ?
You can also unroot flashing stock system.img
k3lcior said:
Did you tried Flash Tool (CSE) ?
You can also unroot flashing stock system.img
Click to expand...
Click to collapse
i'll try it right now, with the lg support tool
k3lcior said:
Did you tried Flash Tool (CSE) ?
You can also unroot flashing stock system.img
Click to expand...
Click to collapse
well, same problem with lg flash tool hangs at 9% at upgrading phone, how do i do that last part the system image thing?
Same way you root except you flash stock.img
http://forum.xda-developers.com/showthread.php?t=3178354
Tapnięte.
k3lcior said:
Same way you root except you flash stock.img
http://forum.xda-developers.com/showthread.php?t=3178354
Tapnięte.
Click to expand...
Click to collapse
thanks i'll try it right now is do you maybe now where i can find the stock system image
can't seem to find any stock system images for the lg g flex 2 h955 i found a system dump but have no nolague on how to make it into a img
I have a working h955 15b Image @home. I can upload it today at about 4 pm (yet 8:30 am)
I had similar problem with windows localization..on my czech version of win it stuck on x%, but while using english version of windows there was no problem..
This problem was resolved for me by removing some apps from the device, the flash tool needs around 2gb of free storage to work. The first 50% of the tool's progress appears to be copying files to the flex 2.
Masterleaf said:
This problem was resolved for me by removing some apps from the device, the flash tool needs around 2gb of free storage to work. The first 50% of the tool's progress appears to be copying files to the flex 2.
Click to expand...
Click to collapse
did try that but still the same sits at 9, have over 7gigs of free space
bohy17 said:
I had similar problem with windows localization..on my czech version of win it stuck on x%, but while using english version of windows there was no problem..
Click to expand...
Click to collapse
have tried to use a different laptop keep having the same problem
TheAxiks said:
I have a working h955 15b Image @home. I can upload it today at about 4 pm (yet 8:30 am)
Click to expand...
Click to collapse
that would be great thanks!, but will this brick my device since i'm using v 15a?
ShadowRii said:
that would be great thanks!, but will this brick my device since i'm using v 15a?
Click to expand...
Click to collapse
I don't think so but should work
@ShadowRii
it's compressed as rar
Link: 15b H955 Syste.img
TheAxiks said:
I don't think so but should work
@ShadowRii
it's compressed as rar
Link: 15b H955 Syste.img
Click to expand...
Click to collapse
it worked thank you a lot!!
LGv20 Stock file H91810j
I am getting the same problem where it getstuck at 9%
Can any one help as my phone is currently dead stuck at the lg boot logo
stuck on 9% fix it
If uu still not fixed, reply back, i have solutios 4 uu brother.. i ****ing with this **** 1 all ****ing day!! and i have to **** up i little more this **** fon, so i could be abble to flash wia kdz file.... **** uu lg!!
dragantnt said:
If uu still not fixed, reply back, i have solutios 4 uu brother.. i ****ing with this **** 1 all ****ing day!! and i have to **** up i little more this **** fon, so i could be abble to flash wia kdz file.... **** uu lg!![/QUOTE
While flashing my ls991....... LGUP is stuck at 9% with error invalid command response i have changed DLL files (also codefire file) but same problem please help Me
Click to expand...
Click to collapse
3ilal said:
dragantnt said:
If uu still not fixed, reply back, i have solutios 4 uu brother.. i ****ing with this **** 1 all ****ing day!! and i have to **** up i little more this **** fon, so i could be abble to flash wia kdz file.... **** uu lg!![/QUOTE
While flashing my ls991....... LGUP is stuck at 9% with error invalid command response i have changed DLL files (also codefire file) but same problem please help Me
Click to expand...
Click to collapse
Anybody with working solution?
Click to expand...
Click to collapse
So, i was trying to flash a ROM after i got my recovery and root going on, i wiped EVERYTHING INCLUDING THE recovery file i made and the installation file i got in the phone when i went to wipe the system files and attempt to install the ROM. So, i tried to put the ROM files into my phone via the ADB method. It worked but my ROM didn't and now my S6 is in a boot loop. i have tired Odin, smartwatch and kies. On kies and smart watch, they both said the attempt to install stock ROM failed and attempt a emergency recovery. HOWEVER, both software did not recognize my device in the emergency recovery devices list, nor did it recognize it as a compatible device in the 1st place, i tired to reinstall the drivers and the software themselves but nothing worked. For Odin, it keeps on saying fail to flash as well, it usually stuck on the 'nano write' process or 'setting up connection' process for a long time too! I did download the official Samsung firmware and extracted it, put it into the blank next to the 'AP' button in odin and i got 'Auto Reboot' and 'F. Reset Time' checked off. On the phone, i can boot in to download mode and download mode only, now it shows me a triangle and it says that stock firmware flash failed and use emergency recovery. i actually download a custom recovery and for some reason it wont boot into that.
Model number: SM-G920W8
carrier: fido
If any of you pros got any ideas please share with me, i've been trying to fix this problem for about a day and a night.
try "nand erase all" in odin while flashing the stock fido rom
noob924 said:
try "nand erase all" in odin while flashing the stock fido rom
Click to expand...
Click to collapse
well it either says fail or stuck in set up connection
Use smart switch
shahram Ali said:
Use smart switch
Click to expand...
Click to collapse
like i said man, both kies and smartwatch don't work.
BigBlackCook said:
like i said man, both kies and smartwatch don't work.
Click to expand...
Click to collapse
it should work !!
shahram Ali said:
it should work !!
Click to expand...
Click to collapse
On kies and smart swich, they both said the attempt to install stock ROM failed and attempt a emergency recovery. HOWEVER, both software did not recognize my device in the emergency recovery devices list, nor did it recognize it as a compatible device in the 1st place, i tired to reinstall the drivers and the software themselves but nothing worked. I even contacted Samsung and they said that it won't work because my device is rooted. i've seen videos of it working but not for me, did i do anything wrong or did i miss anything?
BigBlackCook said:
On kies and smart swich, they both said the attempt to install stock ROM failed and attempt a emergency recovery. HOWEVER, both software did not recognize my device in the emergency recovery devices list, nor did it recognize it as a compatible device in the 1st place, i tired to reinstall the drivers and the software themselves but nothing worked. I even contacted Samsung and they said that it won't work because my device is rooted. i've seen videos of it working but not for me, did i do anything wrong or did i miss anything?
Click to expand...
Click to collapse
dude dont use emergency recovery use device initialization
shahram Ali said:
dude dont use emergency recovery use device initialization
Click to expand...
Click to collapse
IT WORKED!!! idk why it didint work the 1st damn time but i guess it's the usb connection or what not. Now it workes, time to root again and re-uninstall the bloat ware.. prob wont install a rom tho btw.. since ur a pro, what else do ppl do afterthey root their phone? other then to uninstall bloatware
BigBlackCook said:
IT WORKED!!! idk why it didint work the 1st damn time but i guess it's the usb connection or what not. Now it workes, time to root again and re-uninstall the bloat ware.. prob wont install a rom tho btw.. since ur a pro, what else do ppl do afterthey root their phone? other then to uninstall bloatware
Click to expand...
Click to collapse
ahaha congratulations dude but take back up of your EFS cause bricking sometimes make it gone take a back up and keep it somewhere safe and add solved near thread title
shahram Ali said:
ahaha congratulations dude but take back up of your EFS cause bricking sometimes make it gone take a back up and keep it somewhere safe and add solved near thread title
Click to expand...
Click to collapse
what's EFS?
BigBlackCook said:
what's EFS?
Click to expand...
Click to collapse
it is youre imei wifi etc it is important thing to back up
shahram Ali said:
it is youre imei wifi etc it is important thing to back up
Click to expand...
Click to collapse
yeah cause with out the S/R, smart swich won't work D: good thing is that the sticker on the bak of my phone has all that info on it, it kinda saved my life.
BigBlackCook said:
yeah cause with out the S/R, smart swich won't work D: good thing is that the sticker on the bak of my phone has all that info on it, it kinda saved my life.
Click to expand...
Click to collapse
yeah it is
shahram Ali said:
yeah it is
Click to expand...
Click to collapse
about roms, i still got 5.1.1 so if i want to install a rom, does it matter? or is it just about finding the 1 for your model. i want to install XtreStoLite but some versions have android 6.0 in the title and some have 5.1.1, and why don't posts about roms have any comments?
BigBlackCook said:
about roms, i still got 5.1.1 so if i want to install a rom, does it matter? or is it just about finding the 1 for your model. i want to install XtreStoLite but some versions have android 6.0 in the title and some have 5.1.1, and why don't posts about roms have any comments?
Click to expand...
Click to collapse
If u want 6.0.1 and i recommend to use 6.0.1 u need 6.0.1 bootloader and modem and ur phone is canadian so find an w8 rom but flash 6.0.1 modem and bootloader
shahram Ali said:
If u want 6.0.1 and i recommend to use 6.0.1 u need 6.0.1 bootloader and modem and ur phone is canadian so find an w8 rom but flash 6.0.1 modem and bootloader
Click to expand...
Click to collapse
so u ned to flash boot loaders and modem? damn maybe dats why that rom bricked my phone LOL
BigBlackCook said:
so u ned to flash boot loaders and modem? damn maybe dats why that rom bricked my phone LOL
Click to expand...
Click to collapse
If you flashed 6.0.1 rom on 5.1.1 bootloader maybe
shahram Ali said:
If you flashed 6.0.1 rom on 5.1.1 bootloader maybe
Click to expand...
Click to collapse
LOL i got it bricked again after installing both the boot loader and a modem.. i did them 1 by 1 and for some reason it says success in odin but had to reinstall firmware again to make my s6 work.. how do people install rom these days..
BigBlackCook said:
LOL i got it bricked again after installing both the boot loader and a modem.. i did them 1 by 1 and for some reason it says success in odin but had to reinstall firmware again to make my s6 work.. how do people install rom these days..
Click to expand...
Click to collapse
dude install stock then flash twrp and use ur model number rom not others 6.0.1
So after flashing my D850 from 4.4.2 to 7.0, I cannot access TWRP recovery. Ever since I flashed the rom, I keep getting these 3 errors:
"boot certification verify
secure booting error
cause:boot certification verify".
I can still boot into 7.0, but it's not fully functional. It's missing apps, functions, keeps crashing, etc.
Any suggestions to fixing this?
Huz416 said:
So after flashing my D850 from 4.4.2 to 7.0, I cannot access TWRP recovery. Ever since I flashed the rom, I keep getting these 3 errors:
"boot certification verify
secure booting error
cause:boot certification verify".
I can still boot into 7.0, but it's not fully functional. It's missing apps, functions, keeps crashing, etc.
Any suggestions to fixing this?
Click to expand...
Click to collapse
Only solution is to flash back to stock. CM normally seems to loose access to twrp. Not sure if there's a simple way of getting it back but normally all I know is flashing back to stock
Sent from my iPhone using Tapatalk
Thank for replying. Is there a good tutorial out there you can post on how to flash back to stock rom please? My current 7.0 rom won't even let be root my device.
hyelton said:
Only solution is to flash back to stock. CM normally seems to loose access to twrp. Not sure if there's a simple way of getting it back but normally all I know is flashing back to stock
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Thank for replying. Is there a good tutorial out there you can post on how to flash back to stock rom please? My current 7.0 rom won't even let be root my device.
Huz416 said:
Thank for replying. Is there a good tutorial out there you can post on how to flash back to stock rom please? My current 7.0 rom won't even let be root my device.
Click to expand...
Click to collapse
There's a back to stock guide in the general section.
Sent from my iPhone using Tapatalk
hyelton said:
There's a back to stock guide in the general section.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Would it be possible for you to post a link please? I'm new to this website and I cannot find it.
Huz416 said:
Would it be possible for you to post a link please? I'm new to this website and I cannot find it.
Click to expand...
Click to collapse
https://forum.xda-developers.com/showthread.php?t=2785089
You would follow the tot method, and be sure to choose board_dl when you choose the tot and dll file in the software
Sent from my iPhone using Tapatalk
hyelton said:
Only solution is to flash back to stock. CM normally seems to loose access to twrp. Not sure if there's a simple way of getting it back but normally all I know is flashing back to stock
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
hyelton said:
https://forum.xda-developers.com/showthread.php?t=2785089
You would follow the tot method, and be sure to choose board_dl when you choose the tot and dll file in the software
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
board_dl meaning this link, right? http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/
Huz416 said:
board_dl meaning this link, right? http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/
Click to expand...
Click to collapse
That's where your firmware will be use but board_dl is a setting in flashtool
Sent from my iPhone using Tapatalk
hyelton said:
That's where your firmware will be use but board_dl is a setting in flashtool
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Oh, okay. I'll try it out tonight and will get back to you if I need anymore help. Thank you so much.
hyelton said:
That's where your firmware will be use but board_dl is a setting in flashtool
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
The only problem I'm having is that I can't change the port settings. My PC recognizes my G3 as "AOSP on D850".
Huz416 said:
The only problem I'm having is that I can't change the port settings. My PC recognizes my G3 as "AOSP on D850".
Click to expand...
Click to collapse
So you can change the port under device manager? What's the error?
Sent from my iPhone using Tapatalk
hyelton said:
So you can change the port under device manager? What's the error?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
After clicking on my device under portable devices in device manager, the only options I get are general, driver, details, events, power management. I'm using Windows 10 to do this.
Huz416 said:
After clicking on my device under portable devices in device manager, the only options I get are general, driver, details, events, power management. I'm using Windows 10 to do this.
Click to expand...
Click to collapse
It wouldnt be under portable devices, it would be under Communication Ports. If you don't see that you would need to unhide them
hyelton said:
It wouldnt be under portable devices, it would be under Communication Ports. If you don't see that you would need to unhide them
Click to expand...
Click to collapse
I'm honestly about to throw my phone against a wall right now. I cannot boot into download mode anymore, my computer won't allow me change the port settings, the only thing I can do is enter the rom. USB debugging still works and I can transfer files, but everything else is broken.
Huz416 said:
I'm honestly about to throw my phone against a wall right now. I cannot boot into download mode anymore, my computer won't allow me change the port settings, the only thing I can do is enter the rom. USB debugging still works and I can transfer files, but everything else is broken.
Click to expand...
Click to collapse
So your using a USB 2.0 only port right when trying to put the device into download mode?
I still dont understand why your saying it wont allow you to change the port settings? I've never ever seen this. If the port is there you can change it. Remmeber your phone HAS to be in download mode for the com port to show up to change it to com41. Why not try LGUP?
hyelton said:
So your using a USB 2.0 only port right when trying to put the device into download mode?
I still dont understand why your saying it wont allow you to change the port settings? I've never ever seen this. If the port is there you can change it. Remmeber your phone HAS to be in download mode for the com port to show up to change it to com41. Why not try LGUP?[/QUOTE
Thank you, I was using the wrong USB port. It's currently installing the device. What is LGUP?
Click to expand...
Click to collapse
Huz416 said:
hyelton said:
So your using a USB 2.0 only port right when trying to put the device into download mode?
I still dont understand why your saying it wont allow you to change the port settings? I've never ever seen this. If the port is there you can change it. Remmeber your phone HAS to be in download mode for the com port to show up to change it to com41. Why not try LGUP?[/QUOTE
Thank you, I was using the wrong USB port. It's currently installing the device. What is LGUP?
Click to expand...
Click to collapse
LGUP is part of the back to stock guide. Theres KDZ flash tool, TOT flashtool, and LGUP which flashes both tot and kdz files.
Click to expand...
Click to collapse
hyelton said:
Huz416 said:
LGUP is part of the back to stock guide. Theres KDZ flash tool, TOT flashtool, and LGUP which flashes both tot and kdz files.
Click to expand...
Click to collapse
It says it's only for the D855 model? Not D850?
Click to expand...
Click to collapse
Huz416 said:
hyelton said:
So your using a USB 2.0 only port right when trying to put the device into download mode?
I still dont understand why your saying it wont allow you to change the port settings? I've never ever seen this. If the port is there you can change it. Remmeber your phone HAS to be in download mode for the com port to show up to change it to com41. Why not try LGUP?[/QUOTE
Thank you, I was using the wrong USB port. It's currently installing the device. What is LGUP?
Click to expand...
Click to collapse
Huz416 said:
hyelton said:
It says it's only for the D855 model? Not D850?
Click to expand...
Click to collapse
Its for every model
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Hello,
I have an lg-h959 stuck on logo and i want to flash it....problem is i have never flashed an lg before and also i dont know what region it is....can someone help me out?
andrew21 said:
Hello,
I have an lg-h959 stuck on logo and i want to flash it....problem is i have never flashed an lg before and also i dont know what region it is....can someone help me out?
Click to expand...
Click to collapse
What's the reason it's stuck on the logo? Did you do something like attempt root or anything?
If you haven't done anything to cause it did you try performing a factory reset?
It could be a hardware issue or battery problem if you didn't do anything to cause the stuck on LG logo problem.
Sent from my iPhone using Tapatalk
hyelton said:
What's the reason it's stuck on the logo? Did you do something like attempt root or anything?
If you haven't done anything to cause it did you try performing a factory reset?
It could be a hardware issue or battery problem if you didn't do anything to cause the stuck on LG logo problem.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I didnt root the phone, it just goes on and off, i want to try flashing it with LG Flash Tool 2014...i cant hard reset either since it just doesnt go to factory set mode.....can you provide me with correct firmware pls?
andrew21 said:
I didnt root the phone, it just goes on and off, i want to try flashing it with LG Flash Tool 2014...i cant hard reset either since it just doesnt go to factory set mode.....can you provide me with correct firmware pls?
Click to expand...
Click to collapse
So with the phone off you've tired holding down vol up and power or vol down and power to attempt to factory reset? Your phone doesn't need to boot into the OS to factory reset it...
Also normally this doesn't happen unless it's a hardware issue since you didn't do anything to cause it.
Was the device running MM? If so you need to use LGUP. Lg flashtools 2014 won't work if your running MM 6.0.
Just check out the general section there's a back to stock guide with links to firmwares.
Sent from my iPhone using Tapatalk
Ok so I checked it, can you tell me which stock firmware to download, also my phone reboots and I don't know if it running on mm
Hello, my phone constantly reboots and stuck on logo, how do I know android version of this phone? Is there any tool that can help me do this? I can go to factory set mode and download mode
andrew21 said:
Hello, my phone constantly reboots and stuck on logo, how do I know android version of this phone? Is there any tool that can help me do this?
Click to expand...
Click to collapse
Just use LGUP. And flash your models kdz. There's no specific one just make sure it matches your model.
Sent from my iPhone using Tapatalk
hyelton said:
Just use LGUP. And flash your models kdz. There's no specific one just make sure it matches your model.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
So, i downloaded LGUP AND drivers and H95920a_00_0624.kdz file...will that do it? I know the flashing procedure.
andrew21 said:
So, i downloaded LGUP AND drivers and H95920a_00_0624.kdz file...will that do it? I know the flashing procedure.
Click to expand...
Click to collapse
Yes. Just place your phone in download mode.
If your phone still does the same after flashing it's either your battery or a hardware failure.
Sent from my iPhone using Tapatalk
hyelton said:
Yes. Just place your phone in download mode.
If your phone still does the same after flashing it's either your battery or a hardware failure
Ok thanks will try tomorrow and post results
Click to expand...
Click to collapse
Just one more question, can I select refurbish in LGUP and how to select file in this procedure?
andrew21 said:
Just one more question, can I select refurbish in LGUP and how to select file in this procedure?
Click to expand...
Click to collapse
You would choose refurbish
Sent from my iPhone using Tapatalk
Ok will try it out later tomorrow
A couple of us had the same problem. Just buy a new battery and replace it yourself. It fixed the bootloop for all of us.
z.coniglietti said:
A couple of us had the same problem. Just buy a new battery and replace it yourself. It fixed the bootloop for all of us.
Click to expand...
Click to collapse
Ok will do that if software doesnt work
z.coniglietti said:
A couple of us had the same problem. Just buy a new battery and replace it yourself. It fixed the bootloop for all of us.
Click to expand...
Click to collapse
I flashed the phone but same problem...now ill try out new battery and post results tomorrow
Just search the forum and YouTube for lg g flex 2 bootloop and you'll see. I was in the same situation as well and that helped. I replaced it multiple times and I even baked the motherboard in the oven. Just the battery was the issue and thank God nothing worse. And the battery is like 10$ so not too much. Hope you fix it.
z.coniglietti said:
Just search the forum and YouTube for lg g flex 2 bootloop and you'll see. I was in the same situation as well and that helped. I replaced it multiple times and I even baked the motherboard in the oven. Just the battery was the issue and thank God nothing worse. And the battery is like 10$ so not too much. Hope you fix it.
Click to expand...
Click to collapse
Guys problem solved after changing battery...