Hello!
I am new to this forum so please excuse my bad english and don't ignore my post. Idk if this is the right sub forum for my problem.
So. Today I wanted to root my GS6 Romania Orange model. Android 6.0.1. When I wanted to flash the kerenel via Odin I got a fail, and on my phone smth about R/L(reactivation lock) blocked custom binary or smth. I did then do some research and it was about having enabled reactivation lock. The problem ia here: when I want to disable it, I go to fins my mobile and it I can not disable it. More, it tells me to add an account and the reactivation lock setting is enabled and greyed. When I want to add an account it goes to the provious screen. I then remembered that I can't download themes also. I went into app manager to search for Samsung Account. It is not there. Even searching through system apps I could not find it. I reset my phone and realized that in the initial setup I am NOT asked to login to any knid of samsung account...
Please help.
Related
Hello, im new here and i have a question my english is not very good but i will try to example my problem.
I get a s7 from a girlfriend but she dont know her previous google account and the lockscreen password what she used on her s7.
So i try to reset the s7 to factory but i get still the message.
Log in with the google account from the previous owner.
So is its possible to install a custom rom with this problem?
No. Ask her to log in. (Use account recovery)
Hello, I have a galaxy S8 with FRP lock currently. It has 7.0 running. This is a Verizon Galaxy S8 (G950u). Here is the (g950usqs2bql1) software with the bootloader (g950usqu2bqk5). My problem after doing much research is that all the ways to get around the lock are being blocked by the updated firmware. The bluetooth hack won't work since there is no options to access or turn it on. Heres the biggest problem, once I've gotten into DrParser mode, Since this is a Verizon phone, NONE of the secret codes will work with it. Most of the videos and tutorials states I cannot downgrade from where Im currently at with my firmware, and since I cannot gain access to turn on debugging mode, I have no access to use ADB software of the desktop. Now I have access into the whole phone, and have downloaded multiple APK's for entering debugging mode, but still says access denied when trying to bypass. I've also downloaded numerous APK's to bypass FRP without success.
My question is: Is there another way around this without using Drpasser Mode, or the bluetooth method? I might mention I've also logged into my gmail account within the device and when prompted to log into previous owners device, I can use my log in information (which it accepts) and then it will go right back to the menu stating log in with previous owner credentials. PLEASE HELP!
I am still a noob (which Im a pretty fast learner), just need STEP by STEP instructions please. Thanks for any help or advice. :fingers-crossed:
Hi all,
this is my first post on this forum, I have used XDA many times for various reasons but never had to register because I always found a solution... until now.
I have a Samsung Galaxy S7 SM-G930F, non sim locked. This phone used to be my fathers phone, he now has a new phone but he couldn't remember his password from his old Gmail account. He wants to give the phone to his wife, but he has reset the phone without disabling 'find my phone' and now his wife can't access the phone because of FRP lock.
I have done extensive searches and found multiple 'solutions' on how to bypass FRP but none of them has worked so far. That's where I need help.
As I've mentioned before, it's a Samsung Galaxy S7 SM-G930F, unlocked sim version. It's a device that's made for the Dutch market. As far as I know the phone has been properly updated till two months ago, it has Android Oreo but not sure which security update, it definitely doesn't have the 2018 november update.
Can somebody help me with finding the proper bootloader etc so I can flash the device and my fathers wife can use the phone? That would be much appreciated.
tnx in advance!
MicGlou said:
Hi all,
this is my first post on this forum, I have used XDA many times for various reasons but never had to register because I always found a solution... until now.
I have a Samsung Galaxy S7 SM-G930F, non sim locked. This phone used to be my fathers phone, he now has a new phone but he couldn't remember his password from his old Gmail account. He wants to give the phone to his wife, but he has reset the phone without disabling 'find my phone' and now his wife can't access the phone because of FRP lock.
I have done extensive searches and found multiple 'solutions' on how to bypass FRP but none of them has worked so far. That's where I need help.
As I've mentioned before, it's a Samsung Galaxy S7 SM-G930F, unlocked sim version. It's a device that's made for the Dutch market. As far as I know the phone has been properly updated till two months ago, it has Android Oreo but not sure which security update, it definitely doesn't have the 2018 november update.
Can somebody help me with finding the proper bootloader etc so I can flash the device and my fathers wife can use the phone? That would be much appreciated.
tnx in advance!
Click to expand...
Click to collapse
Tell him to just reset his password, and log into it then
Of course we've tried it, but with no phonenumber or secondary email attached that's impossible.
Beside that, he wasn't even sure about the account used, has multiple gmail accounts that he doesn't use anymore.
But I've had help through a user who send me a PM, phone is working again.
BurnedDrake said:
Tell him to just reset his password, and log into it then
Click to expand...
Click to collapse
I have a SM-G930T Galaxy S7 that I can't figure out also.. Seems G**gle has a way of keeping it's security patches installed. I downgraded it to 7.0 succesfully but Odin fails while downgrading to 6.0.1. I was able to bypass my j7 after 3 days of trying various methods till I came up with my own combination. But this S7 has me ready to pay someone else to do it for me. Any guidance would be greatly appreciated!
binary: samsung official
system status: official
frp lock: on
warranty void 0x0
secureboot: enable
ap swrev: b4(2.1.1.1) k1 s3
secure download: enable
Hi All
I have an S7 Exynos with latest Magisk installed and everything has been working flawlessly till I decided this early morning, for not any particular reason(except my increasing amount of grey hair ), to lock the "developer options". I think I have done the same maybe a couple of years ago though cannot remember how I had solved it.
Obviously my phone was instantly locked.
Would someone be able to link a good working solution with being able to keep data and apps? I am a bit desperate as my work is starting again tomorrow.
Thanks a lot.
look at frp bypass
Costum binary blocked by FRP lock is a protection, whene you do a factory reset from recovery. the only way you get this message is with odin.
this one works for me on s7, s7 edge and s6 tab
Thanks @Dagobert
I will have a look at it now and see if it is not too scary. See my S7 FRP
kiwigi said:
deleted as repeated post
Click to expand...
Click to collapse
Do you have acces to the phone?
kiwigi said:
deleted as repeated post
Click to expand...
Click to collapse
If you have acces to the phone then backup your data do a factory reset. Then you can flash whatever you want. Frp lock is a google protection with a google account. Whene you do a factory reset from settings you wipe the frp.
What is Google FRP?
FAQ for Samsung Mobile Device. Find more about 'What is Google FRP?' with Samsung Support.
www.samsung.com
I have access to the phone via PC/Odin only. No booting as per image above. I wand to keep Data and Apps
I assume I have to flash stock with home csc to be able to enter the phone again? Then root again, if I so wish?
Yup. Maybee a long shot but try Flashing your former firmware with Odin, using HOME_CSC. I think thats the solution
More info on that in this topic
Help! How to flash without losing data?
Good day! My phone got stuck on breathing Samsung logo after my phone updates. Now the only option I have in mind is to restore factory data. But I have some important files in my phone that is very essential in my work. I know I have read that...
forum.xda-developers.com
hmm., done the flashing with the files plus home csc and it asks for password, which I have entered without success. I know the password and it justs does not accept it.
See the factory reset warning and the FRP lock still being on now.
I'm desperately trying to avoid wipping data and apps.
edit: unfortunately I had to format/reinstall as I could not find a workable option.
Hello , I did a hard reset on my Samsung galaxy s6 g920f duos. Reactivation lock was on. After that while signing in to Samsung account with correct email and password brings an error message "processing failed".
6.0.1 G920FXXS4DPG4
Can I downgrade this to a lower version so that I can bypass and remove the reactivation lock?..
Any other ideas/solutions please ?
You have Google account associated with the device? Use that.
If not you can bypass FRP but it's not particularly easy or fun... google it.
In the future...
Delete accounts before a factory reset.
Do the factory reset from settings rather than the boot menus if possible.
Write down the passwords.
I deleted all accounts except for Samsung account before resetting..which also brought same error message "processing failed"
I never dealt with the Samsung lockout... Thanks for the warning.
No doubt it's tied to Knox.
If you got a Samsung Experience center near you they may be of help.
You can try their support line but it almost anyways sucks. US support is the best of that lot.
Hopefully someone here knows a work around as I don't.