I am very confused and I really need some help.
I have been installing some different roms and I tried to edit the mixer_paths file editing the volumes.
BEFORE (until yesterday) I had low mic volume (the others couldn't hear me) while NOT being on speaker. While when I was on speaker during a call the mic was working perfectly and the others could hear me.
TODAY I have the exact OPPOSITE problem. When I am NOT on speaker the others can hear me perfectly and the mic works fine. When I start the speaker the mic got totally muted and the others can't hear me!
So far I have found that the DEC4 value in the mixer paths file increase the mic volume when NOT on speaker.
Does anyone knows how can I raise the volume of the mic while I am on speaker?
I am using hte SULTANXDA CM13 rom.
thanks!
My mic worked and works good when im not on the speaker. But when i use the speaker its pretty bad and the other side cant really understand me. This has been a thing for me since i own this phone. No matter what ROM i tried from COS (11 & 12) to CM Official Nightlies (12 & 13) or even unofficial Builds (e.g. SultanXDA). Also i tried different Kernels and didnt mention any effect on this issue. I think it has something to do with echo cancellation.
So i dont know how you managed to have the opposite problem before yesterday, but the problem you have now is a normal thing for me and meanwhile im used to it ^^
Any solution for this?
experiencing the same.
Sent from my A0001 using Tapatalk
I have the same problem, if hold the phone near my mouth, the other person hears me, if not, no sound.
Same here. I think I need to do a support email with them. It just happened a few weeks ago and I tried everything but going to oxygen os
they told me to update to the latest version... updated to thhe latest cm or cos offical roms... oxygen wouldnt flash for whatever reason. ill try a little more later. im gonna keep trying every weekend for a few months and if i dont get it going, i might just buy another op3. i use my speakerphone for work a lot
red5pade said:
they told me to update to the latest version... updated to thhe latest cm or cos offical roms... oxygen wouldnt flash for whatever reason. ill try a little more later. im gonna keep trying every weekend for a few months and if i dont get it going, i might just buy another op3. i use my speakerphone for work a lot
Click to expand...
Click to collapse
please update after u upgrade.
thanks
Sent from my A0001 using Tapatalk
TheNerd said:
please update after u upgrade.
thanks
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Yep, oxygen 2.1.4 fixed it. I had a hard time flashing it because I was f2fs. Just make sure you download it to your device and then follow the steps. Hope you get yours fixed
Cancel that, I flashed twrp and went to m82 tugapower and now its not working again. I wonder if this is because of cm13 crap
red5pade said:
Cancel that, I flashed twrp and went to m82 tugapower and now its not working again. I wonder if this is because of cm13 crap
Click to expand...
Click to collapse
so speakerphone mic works well on oxygenOS but not on CM forks?
interesting. I would have flashed Oxy if it was Marshmallow based for 1+1
Sent from my A0001 using Tapatalk
TheNerd said:
so speakerphone mic works well on oxygenOS but not on CM forks?
interesting. I would have flashed Oxy if it was Marshmallow based for 1+1
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Yep. I'm tired of flashing things. Just want something that works. Wish there was a good ROM that was free of cm crap. They're always breaking crap
TheNerd said:
so speakerphone mic works well on oxygenOS but not on CM forks?
interesting. I would have flashed Oxy if it was Marshmallow based for 1+1
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
So I flashed a few ROMs and it seems all ROMs based on cm are having the issue. I flashed darkobas or w/e and everything is working great. Hope that helps.
red5pade said:
So I flashed a few ROMs and it seems all ROMs based on cm are having the issue. I flashed darkobas or w/e and everything is working great. Hope that helps.
Click to expand...
Click to collapse
can you link the thread where you found the darkobass you flashed please?
or w/e
Sent from my A0001 using Tapatalk
TheNerd said:
can you link the thread where you found the darkobass you flashed please?
or w/e
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
I had to get rid of darkobus... It would start to lag a lot. Try saosp
http://forum.xda-developers.com/oneplus-one/development/rom-saosp-m-t3267790
Make sure you have a twrp version older than 3.x. Also, read how and what to flash on the first post. Xposee and gravitybox is great on this rom to get the features it doesn't have. It's a pretty bare bones ROM... But at least things work.
I can confirm speaker mic is working with this ROM though. Used it this morning
red5pade said:
I had to get rid of darkobus... It would start to lag a lot. Try saosp
http://forum.xda-developers.com/oneplus-one/development/rom-saosp-m-t3267790
Make sure you have a twrp version older than 3.x. Also, read how and what to flash on the first post. Xposee and gravitybox is great on this rom to get the features it doesn't have. It's a pretty bare bones ROM... But at least things work.
I can confirm speaker mic is working with this ROM though. Used it this morning
Click to expand...
Click to collapse
DUDE THANK YOU SO MUCH!!!
after a year with this issue, darkobass finally solved it.
people can hear me when I switch to speakerphone.
I wonder why it doesn't work on CM.
thanks!!!
Sent from my A0001 using Tapatalk
TheNerd said:
DUDE THANK YOU SO MUCH!!!
after a year with this issue, darkobass finally solved it.
people can hear me when I switch to speakerphone.
I wonder why it doesn't work on CM.
thanks!!!
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
NP bro. I had an issue with dark not taking pictures. Never reported it but may have been patched by now
Related
Seems people dont apreciate someones work, all they do is complain and complain, and im tired of that. il will repost this rom whenever i get time to fix it.
Thread will be closed asap
Will try when have auto brightness.
Can't wait!
Sent from my LG-P999 using xda premium
Looks good, always happy to see something new!
is this plagued with the quiet microphone issue like all cm7/miui roms?
drmidnight said:
Looks good, always happy to see something new!
is this plagued with the quiet microphone issue like all cm7/miui roms?
Click to expand...
Click to collapse
never had this issue on ether cm7 or miui.
upload is done, enjoy guys, please report any other bug i have missed.
This is an Amazing rom. I love the look of it.
Data and wifi internet is not working.
Can't call or bring up dialer/contacts
On China Time, can't change it.
Cool rom but its a incomplete rom. Really looking forward to this.
Will try ...just cause becuz I'm a flash crazy...will report back...gonna back up my current miui
kvnd said:
This is an Amazing rom. I love the look of it.
Data and wifi internet is not working.
Can't call or bring up dialer/contacts
On China Time, can't change it.
Cool rom but its a incomplete rom. Really looking forward to this.
Click to expand...
Click to collapse
wipe data wipe cache and dalvik cache, those works perfectly fine.
data not sure i have no way of testing it, try adding apn's manually
ok again i forgot to wipe data before uploading, seems android docent like the odexed apps with deo dexed ones. i know how to fix, gahh i hate the way g2x works -_-
siulmagic said:
never had this issue on ether cm7 or miui.
Click to expand...
Click to collapse
Ever since cm7 nightly 211 the internal microphone volume is insanely quiet. I have had numerous complaints from people on the other side of the phone when running any miui or cm7 kang.
Everything wrks for me ....I wiped everything but wen I try 2 update wen the system said it...the dwnload. Failed...every time I tired to download it failed
bountyman334 said:
Everything wrks for me ....I wiped everything but wen I try 2 update wen the system said it...the dwnload. Failed...every time I tired to download it failed
Click to expand...
Click to collapse
il release a patch anyways, if its the actual dianxin rom update you cant download it, that for totally different device. but if you mean the launcher update that one works fine.
I hate to ask this cause I know it's the wrong forum, but is there any chance you might work on a G2 (desire z, vision, whatever) port of this ? I've always loved your work and this looks cool also we have some pretty stable ICS builds too if you'd like this post gone from here cause its too OT just pm me and I'll delete
Waaaay to many issues. Can't wait till this is stable so i can try it again.
Sent from my LG-P999 using xda premium
dw9906 said:
Waaaay to many issues. Can't wait till this is stable so i can try it again.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
i hardly consider 3~ issues alot, but hey whatever rocks your boat.
uploading patch, it going to take a while.
v1.0.1 is out
siulmagic said:
v1.0.1 is out
Click to expand...
Click to collapse
I just installed the previous version. It looks really cool. How do you access the market? Also, do you plan on converting everything to english
Sent from my LG-P999 using xda premium
mannyg78 said:
I just installed the previous version. It looks really cool. How do you access the market? Also, do you plan on converting everything to english
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
its in the app drawer. i made sure it worked. when ever the NS team releases updates for the port il update mine, there the ones translating it(i could be mistaken).
LG just released a sound update for the g2x v21y firmware. Sound on voice calls is much improved!.. I just downloaded it and am talking it on right now. Two words much improved.. I know a lot of you guys are complaining about the clicking and buzzing noises, this might fix it.
http://support.lgforum.com/lg/topics/t_mobile_g2x_update_for_sound_quality
ZiZi_G2X said:
LG just released a sound update for the g2x v21y firmware. Sound on voice calls is much improved!.. I just downloaded it and am talking it on right now. Two words much improved.. I know a lot of you guys are complaining about the clicking and buzzing noises, this might fix it.
http://support.lgforum.com/lg/topics/t_mobile_g2x_update_for_sound_quality
Click to expand...
Click to collapse
Thanks for the post. Does this change anything visible such as version or baseband numbers?
andrewNY said:
Thanks for the post. Does this change anything visible such as version or baseband numbers?
Click to expand...
Click to collapse
Not that I can see... You don't even use the lg updater tool for this update, they make you download a separate exe file that runs the software update.
ZiZi_G2X said:
Not that I can see... You don't even use the lg updater tool for this update, they make you download a separate exe file that runs the software update.
Click to expand...
Click to collapse
link?
Sent from my LG-P999 using XDA
I wonder if this will let those of us on 21y use custom roms and make calls.
Sk8trfred said:
link?
Sent from my LG-P999 using XDA
Click to expand...
Click to collapse
It's in the first post..
Nice I'll do this soon.
EDIT:
Ok going to do it now... haha Chrome tells me the .exe "appears malicious."
I tried it and it reinstalls everything. Data still there, but you lose root, custom kernel, and custom recovery
Sent from my LG-P999 using XDA
dragonrider8844 said:
I tried it and it reinstalls everything. Data still there, but you lose root, custom kernel, and custom recovery
Sent from my LG-P999 using XDA
Click to expand...
Click to collapse
Did you nvflash cwm and install any non 2.3.4 stock ROM to see if sound in call works?
buru898 said:
Did you nvflash cwm and install any non 2.3.4 stock ROM to see if sound in call works?
Click to expand...
Click to collapse
I haven't yet. I was heading to gym so I restored my backup. Going to try when I get home
Sent from my LG-P999 using XDA
Downloading the tool down. Funny, I just made a thread about call audio being bad. Going to try this out. Also read above that it resets everything to bone stock, after flashing to a new ROM, will the updated audio fix be retained?
Someone make a nandroid of this, ASAP! This could be the key to fully working March 2012 baseband on ics!
tahahawa said:
Someone make a nandroid of this, ASAP! This could be the key to fully working March 2012 baseband on ics!
Click to expand...
Click to collapse
I just installed an ICS rom and there still is the clicking sound
Well I did the "update" and flashed cwm and restored my 2.3.3 backup of bionix and calls work for me now (using grooveIP as my phone is disconnected at the moment) and before I'd get the static noise.
So I'm assuming it worked for me, I'm PRETTY sure I still got the popping noise when using grooveIP? I'll restore another backup and see if anything else changed.
Restored an ICS backup and call works through grooveIP still...
Hmm... wonder if they did just change something minor in the baseband to allow it to work?
buru898 said:
Nice I'll do this soon.
EDIT:
Ok going to do it now... haha Chrome tells me the .exe "appears malicious."
Click to expand...
Click to collapse
Of course it is going to be malicious, it is from LG I want more people to say it works before I update to the new baseband. Anyone else try it yet?
Sent from my LG-P999 using xda premium
buru898 said:
Well I did the "update" and flashed cwm and restored my 2.3.3 backup of bionix and calls work for me now (using grooveIP as my phone is disconnected at the moment) and before I'd get the static noise.
So I'm assuming it worked for me, I'm PRETTY sure I still got the popping noise when using grooveIP? I'll restore another backup and see if anything else changed.
Restored an ICS backup and call works through grooveIP still...
Hmm... wonder if they did just change something minor in the baseband to allow it to work?
Click to expand...
Click to collapse
Maybe it only works with wifi calling and grooveIP. It didn't work with 4g
dragonrider8844 said:
I just installed an ICS rom and there still is the clicking sound
Click to expand...
Click to collapse
So what did they fix? In their article they write its for the clicking, popping sound that some users face.
Should I update or should I not?
Sent from my LG-P999
cricketAC said:
So what did they fix? In their article they write its for the clicking, popping sound that some users face.
Should I update or should I not?
Sent from my LG-P999
Click to expand...
Click to collapse
I think the most likely thing is that they changed something in the ROM itself (like the RIL, or similar code), so flashing another ROM isn't going to benefit.
Okay, so finally after several hours of installing this and that, I finally got back to a stock rooted 2.3.4 v21y. I figured cool, its working now, no call audio issues. Proceeded to install EB (GB 2.3.7) and now I'm getting the clicking and popping sounds. Going back to stock again and seeing if I can run this update, then reinstall EB to see if call audio is fixed.
Nexus Cable said:
Okay, so finally after several hours of installing this and that, I finally got back to a stock rooted 2.3.4 v21y. I figured cool, its working now, no call audio issues. Proceeded to install EB (GB 2.3.7) and now I'm getting the clicking and popping sounds. Going back to stock again and seeing if I can run this update, then reinstall EB to see if call audio is fixed.
Click to expand...
Click to collapse
What baseband are you on?
And guys this update is most likely supposed to be used on phones that have the latest baseband in conjunction to having the stock 2.3.4 rom. I doubt it's meant to make better audio quality if you're still on the old baseband.
I have gotten the program used to flash the update, smartflash. And the bin it used. And the dlls. It doesn't look very helpful though.
Q&A for [ROM] [4.4.4] SlimKat (d2vzw) Stable 7.0
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [4.4.4] SlimKat (d2vzw) Stable 7.0. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
like this rom
i like this rom only had a few problems but after a reboot seams to be working good again
I have the weirdest thing happening. I'm on stable 7 and have been for quite a while. It's worked perfectly until a couple days ago and now I can't send text messages out. I think I can receive OK. Just can't send out. I've even tried doing a clean install of this and other ROMs with same result. It gets more odd... After toying with it I can send only one text out. Just one to any person. But I can't send another unless I reboot or I think wait a few hours. Upon reboot I again can send only one text message out. And so on. I have no clue what could be happening. Any ideas?
Sent from my SCH-I535 using XDA Free mobile app
I had that problem when I was using certain builds. I had to drop modem back to BMB1. After that I could send with no issue. I, too could only send one text at a time.
msolaw said:
I have the weirdest thing happening. I'm on stable 7 and have been for quite a while. It's worked perfectly until a couple days ago and now I can't send text messages out. I think I can receive OK. Just can't send out. I've even tried doing a clean install of this and other ROMs with same result. It gets more odd... After toying with it I can send only one text out. Just one to any person. But I can't send another unless I reboot or I think wait a few hours. Upon reboot I again can send only one text message out. And so on. I have no clue what could be happening. Any ideas?
Sent from my SCH-I535 using XDA Free mobile app
Click to expand...
Click to collapse
Where can I turn off the swipe security on the 8.12 update?
markapowell said:
Where can I turn off the swipe security on the 8.12 update?
Click to expand...
Click to collapse
Lockscreen tweaks are in Settings/Interface/Lockscreen
Sent from my SCH-I535 using Tapatalk
What kernel and baseband is recommended to use with this Rom? I haven't used my s3 in awhile and just want to make sure I get it right... Right now I'm on cleanrom 4.5 which is 4.1.1 and on baseband vrblk3.. I did install the latest twrp already.. Thank you in advance and sorry if this was asked and answered already
myredfast said:
What kernel and baseband is recommended to use with this Rom? I haven't used my s3 in awhile and just want to make sure I get it right... Right now I'm on cleanrom 4.5 which is 4.1.1 and on baseband vrblk3.. I did install the latest twrp already.. Thank you in advance and sorry if this was asked and answered already
Click to expand...
Click to collapse
Stock kernel and VRBMF1 firmware is the bassline recommendation. TWRP 2.7 at least, newest TWRP 2.8 works fine as well.
Sent from my SCH-I535 using Tapatalk
SlimSnoopOS said:
Stock kernel and VRBMF1 firmware is the bassline recommendation. TWRP 2.7 at least, newest TWRP 2.8 works fine as well.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Thank you much[emoji2]
I was able to locate the firmware and had a tough time finding the stock kernel as many links for many things are no longer good... I downloaded what I thought was the "stock kernel v2" however when I try to flash after flashing the firmware in twrp I get a failed message "unable to open zip file".. Any thoughts, thank you in adv. Have twrp 2.8.0.1 btw and flashed MF1 firmware....
myredfast said:
I was able to locate the firmware and had a tough time finding the stock kernel as many links for many things are no longer good... I downloaded what I thought was the "stock kernel v2" however when I try to flash after flashing the firmware in twrp I get a failed message "unable to open zip file".. Any thoughts, thank you in adv. Have twrp 2.8.0.1 btw and flashed MF1 firmware....
Click to expand...
Click to collapse
Noooooo haha stock kernel as in the kernel built-in the rom. All you need to flash is SlimKat and gapps then boot.
Sent from my SCH-I535 using Tapatalk
SlimSnoopOS said:
Noooooo haha stock kernel as in the kernel built-in the rom. All you need to flash is SlimKat and gapps then boot.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Lol the last time I was flashing this phone I was doing them separate and I thought that it might be built Into the Rom. that's what I did and it's seems to be working other than one freeze up... All good, now that I feel like a complete noob, on with flashing my lg g3... Thanks a lot Snoop I apreesh!!
myredfast said:
Lol the last time I was flashing this phone I was doing them separate and I thought that it might be built Into the Rom. that's what I did and it's seems to be working other than one freeze up... All good, now that I feel like a complete noob, on with flashing my lg g3... Thanks a lot Snoop I apreesh!!
Click to expand...
Click to collapse
That's my bad on the ambiguity! Haha glad you've got it all set up. Just to clarify, every rom comes with a boot.img which is what becomes the kernel. Custom kernels are slightly different.
Sent from my SCH-I535 using Tapatalk
SlimSnoopOS said:
That's my bad on the ambiguity! Haha glad you've got it all set up. Just to clarify, every rom comes with a boot.img which is what becomes the kernel. Custom kernels are slightly different.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Hey no problem, it's all good.. I guess we all have "moments" lol. After looking back on it I was like "Damn I should have known that" haha... I just really appreciate all you and other devs do for the community [emoji106] ?!!! Phone is running champ doe!!! Thanks again! And thanks for clearing that up[emoji2]
GPS issue with latest nightly
Just an FYI, I tried the latest nightly and got zero GPS fix, even with a clean flash. I went back to the latest stable build (also a clean flash) and everything's cool with that, except for my inability to view pics within Gmail. :/
Portable Wi-Fi Hotspot
Hi, I just loaded up Slimkat 4.4.4 with the stock kernel on my Verizon Galaxy S3. I used to use the Wifi Tether TrevE Mod with my previous version and that worked, however, this does not appear to work in this rom. I noticed there was a built in Portable Wi-Fi hotspot, which does work perfectly. I would like to use this but am just concerned that somehow VZ would know I am tethering and I would incur additional charges. Do I have anything to worry about or am I just being paranoid?
Thank you for a GREAT product, it's a spectacular rom.
ooom416354 said:
Hi, I just loaded up Slimkat 4.4.4 with the stock kernel on my Verizon Galaxy S3. I used to use the Wifi Tether TrevE Mod with my previous version and that worked, however, this does not appear to work in this rom. I noticed there was a built in Portable Wi-Fi hotspot, which does work perfectly. I would like to use this but am just concerned that somehow VZ would know I am tethering and I would incur additional charges. Do I have anything to worry about or am I just being paranoid?
Thank you for a GREAT product, it's a spectacular rom.
Click to expand...
Click to collapse
Nope. Lot of us have used it for months with no issue whatsoever.
Sent from my SCH-I535 using Tapatalk
Google Play Services not Installed
Just did a dirty flash of 9 stable over 7 stable flashed the latest gapps, and now the Google play store does not work and a bunch of apps are requesting the install of Google Play Services.
Any tips?
wundbread said:
Just did a dirty flash of 9 stable over 7 stable flashed the latest gapps, and now the Google play store does not work and a bunch of apps are requesting the install of Google Play Services.
Any tips?
Click to expand...
Click to collapse
You could try clearing data for the Play Store. I always encourage a clean flash (wipe data and system) before each new release.
Sent from my SCH-I535 using Tapatalk
Any updates on that "further notice"?
Sent from my SM-T900 using XDA Free mobile app
Hi guys,
I keep checking KitKat ROMs for months, but I always had the echo bug which means during a GSM call the other parties hear the echo of their voice which is a major inconvenience for me. I installed CM11, LiquidSmooth, MoKee, but they are all the same. Using a bluetooth headset is a workaround, but I can't use a headset all the time.
I read the forums and other people have this issue, too. How do you deal with it?
Do you know a way to get rid of it? Editing a config file for decreasing mic sensivity or get the echo cancellation working? Please share your experiences with me. Thank you.
same problem
I am facing same problem, ı could not find any solution. Does anyone has solution?
+1 same problem here (using slimkat)
szomjas said:
Hi guys,
I keep checking KitKat ROMs for months, but I always had the echo bug which means during a GSM call the other parties hear the echo of their voice which is a major inconvenience for me. I installed CM11, LiquidSmooth, MoKee, but they are all the same. Using a bluetooth headset is a workaround, but I cant use a headset all the time.
I read the forums and other people have this issue, too. How do you deal with it?
Do you know a way to get rid of it? Editing a config file for decreasing mic sensivity or get the echo cancellation working? Please share your experiences with me. Thank you.
Click to expand...
Click to collapse
Go for cm12
No mic issue
Thanks for your reply. I'll definitely check Lollipop based ROMs out when it reaches a more matured state. I need my phone is as stable as possible . It's important for me that not to meet any issues when making or receiving a call, so I'll just wait for the time being.
55pawan said:
Go for cm12
No mic issue
Click to expand...
Click to collapse
I used Cm12 lollipop version, i faced same problem as in kitkat.
Some people do not have this problem. What is the reason ? i read from the internet that echo problem depends on the country. When the guy move an another country the problem is no longer exists. do you think is it the true reason ?
I don't think so. Other guy in my country do not have echo problem with his Xperia L.
Also, I checked it with DE and CE 1.14, 1.17 stock firmwares as starting point, all the same.
szomjas said:
I don't think so. Other guy in my country do not have echo problem with his Xperia L.
Also, I checked it with DE and CE 1.14, 1.17 stock firmwares as starting point, all the same.
Click to expand...
Click to collapse
Are you using same gsm provider?
ahmetysfl said:
Are you using same gsm provider?
Click to expand...
Click to collapse
Nope, different one. Do you think it can be the root of my problem?
szomjas said:
Nope, different one. Do you think it can be the root of my problem?
Click to expand...
Click to collapse
İ read it from a forum, if you have the Room, give it a try let us know. i do not have installed rom
Do you have a link for that post?
szomjas said:
Do you have a link for that post?
Click to expand...
Click to collapse
unfortunetaly not, i will be very glad if you check it with another gsm provider.
I tried to choose another network manually, but I couldn't. Guess I need to borrow a SIM card and install the ROM. Well, it won't happen today I'm afraid.
Thank you for answer, you can try any time. I will try it if i have find time.
Any updates about kitkat roms with good volume solution?
Sent from my C2105 using XDA Free mobile app
stconquer said:
Any updates about kitkat roms with good volume solution?
Sent from my C2105 using XDA Free mobile app
Click to expand...
Click to collapse
Not yet
Hi All,
I have installed Viper4android and everything in the driver status screen appears to be working but changing presets does not appear to change the audio in anyway whatsoever.
Does anyone have this working on a K1? if so would you be kind enough to post what you did in case I missed something,
Regards
Richard
RichDem said:
Hi All,
I have installed Viper4android and everything in the driver status screen appears to be working but changing presets does not appear to change the audio in anyway whatsoever.
Does anyone have this working on a K1? if so would you be kind enough to post what you did in case I missed something,
Regards
Richard
Click to expand...
Click to collapse
https://forum.xda-developers.com/shield-tablet/themes-apps/viper4android-t3068574
edisso10018 said:
https://forum.xda-developers.com/shield-tablet/themes-apps/viper4android-t3068574
Click to expand...
Click to collapse
Thank you,
I re installed everything following the link you provided and everything reports as OK in the Driver status page but the sound is not changed at all
RichDem said:
Thank you,
I re installed everything following the link you provided and everything reports as OK in the Driver status page but the sound is not changed at all
Click to expand...
Click to collapse
Did you change SELinux mode? Or is it set to permissive? Otherwise V4A won't work.
Thats way outdated with SE Linux, at least for Viper without any additional Mods like Dolby. Just use Arise https://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
You can look at it like a better Viper since the guys are optimizing **** out of it. It's more or less flash and done. Just use Version 2.3.3 at least that's what i flashed on my Shield, booted up and everything works out of the Box and is preinstalled. I know that 2.4 is out, you can try that as well but i can't provide any personal recommendation for that.
D-m-x said:
Thats way outdated with SE Linux, at least for Viper without any additional Mods like Dolby. Just use Arise https://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
You can look at it like a better Viper since the guys are optimizing **** out of it. It's more or less flash and done. Just use Version 2.3.3 at least that's what i flashed on my Shield, booted up and everything works out of the Box and is preinstalled. I know that 2.4 is out, you can try that as well but i can't provide any personal recommendation for that.
Click to expand...
Click to collapse
Thanks for the information,
The link has so much info on it. Is this the file you are talking about ARISE Sound Systems Deuteronomy 2.4.zip or should I be using ViPER4Arise 2.5.0.5.zip
RichDem said:
Thanks for the information,
The link has so much info on it. Is this the file you are talking about ARISE Sound Systems Deuteronomy 2.4.zip or should I be using ViPER4Arise 2.5.0.5.zip
Click to expand...
Click to collapse
It's 2.4, everything is in there, but I would suggest using 2.3.3 it's one version prior to 2.4.
I know for sure 2.3.3 works because I'm using it, but you can also try 2.4, I just haven't had the chance to update to 2.4 myself since it came out a few days ago.
Gesendet von meinem Nexus 6P mit Tapatalk
D-m-x said:
It's 2.4, everything is in there, but I would suggest using 2.3.3 it's one version prior to 2.4.
I know for sure 2.3.3 works because I'm using it, but you can also try 2.4, I just haven't had the chance to update to 2.4 myself since it came out a few days ago.
Gesendet von meinem Nexus 6P mit Tapatalk
Click to expand...
Click to collapse
Thank you,
I am downloading 2.3.3 now and will give it a try
D-m-x said:
It's 2.4, everything is in there, but I would suggest using 2.3.3 it's one version prior to 2.4.
I know for sure 2.3.3 works because I'm using it, but you can also try 2.4, I just haven't had the chance to update to 2.4 myself since it came out a few days ago.
Gesendet von meinem Nexus 6P mit Tapatalk
Click to expand...
Click to collapse
I have successfully installed 2.3.3 and this time everything is working perfectly. Thanks for your help
I was wondering if you could guide me in installing some custome profiles, I am a little confused about the difference between setprop and tweakprop
RichDem said:
I have successfully installed 2.3.3 and this time everything is working perfectly. Thanks for your help
I was wondering if you could guide me in installing some custome profiles, I am a little confused about the difference between setprop and tweakprop
Click to expand...
Click to collapse
You mean Viper Profiles? Tweak and Setprop are only for modifying the Build.prop, which is not needed in most time. Honestly I've never needed it, not on my Nexus 6, 6P, 5 or Shield. But if you are interested you can read more on it here https://plus.google.com/u/0/111333653880673138633/posts/ZmyiFwiymrc?sfc=false
You can also join the G+ Group here which I would highly recommend https://plus.google.com/u/0/communities/104675617308252943432 because of the various Information found there like this https://docs.google.com/document/d/1g3GygwnQxNZFrWomlAb3Gh-oLCRnsJM9b7cPr0egN0Q/edit :good:
For Viper Profiles you just have to Copy them in the Profiles Folder in /Viper Folder on your SD Card and load them through the App