Database Info

CyanogenMod Installer available

The CyanogenMod installer is finally available...
Description and links can be found here:
http://www.cyanogenmod.org/blog/cyanogenmod-installer-release
Has anyone tried it yet?
Is it as easy as it seems?
I`m going to try it on my next day off. Any thoughts so far?

This is what I get.....
Have you managed to download it?

ChampMEon said:
This is what I get.....
Have you managed to download it?
Click to expand...
Click to collapse
I got it from beta.download.cyanogenmod.org.
I run the program and it performed an update, but I don't know to what version? Release or still beta?
Later today I will try to install CM on my S4 and if it's good ... bye bye Samsung KNOX bull****!

Mittaa said:
I got it from beta.download.cyanogenmod.org.
I run the program and it performed an update, but I don't know to what version? Release or still beta?
Later today I will try to install CM on my S4 and if it's good ... bye bye Samsung KNOX bull****!
Click to expand...
Click to collapse
Please let us know how it went. I'm curious how this CM affects Knox flag.

I´m very interested in this topic too. But I have to admit I´m a bit eager to try this =)
So any information from your side is really appreciated.
Thx =)
PS.: I got the internationel Version, so my Version of supported devices is "jfltexx" right?
/Dev

devvi said:
I´m very interested in this topic too. But I have to admit I´m a bit eager to try this =)
So any information from your side is really appreciated.
Thx =)
PS.: I got the internationel Version, so my Version of supported devices is "jfltexx" right?
/Dev
Click to expand...
Click to collapse
Yes think "jfltexx" is the right one for S4 LTE/INT.
Have second thought after I have read CM i9505 buglist ... Link
Want to be totally sure that I can get back to the firmware I'm using at the moment. So I have a lot of questions as well ...
- Which recovery is the best and how to flash it being on CM.
- What about ROOT? Is latest stable version rooted by default, or do I have to (do I need to?) root it?
- Can I restore my apps using Titanium Backup?

AS far as I can read the information from this page http://wiki.cyanogenmod.org/w/CyanogenMod_Installer#Supported_Devices it says that you actually dont need anything.
So, the right recovery and the latest root SHOULD be installed...but I´ve red no confirmation until yet
Thx for you reply.
/Dev

devvi said:
AS far as I can read the information from this page http://wiki.cyanogenmod.org/w/CyanogenMod_Installer#Supported_Devices it says that you actually dont need anything.
So, the right recovery and the latest root SHOULD be installed...but I´ve red no confirmation until yet
Thx for you reply.
/Dev
Click to expand...
Click to collapse
Hi
I have read information from the link, and it related to root, recovery and backup BEFORE flashing CM.
My questions is what I do AFTER I have flashed CM
- Which recovery is the best and how to flash it being on CM.
- What about ROOT? Is latest stable version rooted by default, or do I have to (do I need to?) root it?
- Can I restore my apps using Titanium Backup?
It might be silly questions, but I only have flashed Samsung Firmwares :cyclops:

I try this installer.This Software install 10.2 M1 Snapshot jfltexx for now,Gapps and Recovery.Really useful.In the feature i hope Cyanogenmod add option to select witch build to install and more information what you really install

I just read the CM page and the Play store entry for the app.
I'm still not sure what this does. Doesn't his just make it easy to install cm on a previously rooted phone? Or is this supposed to take a stock phone without root and install CM automatically?
Sent from your phone. You should be careful where you leave that thing.

Skipjacks said:
I just read the CM page and the Play store entry for the app.
I'm still not sure what this does. Doesn't his just make it easy to install cm on a previously rooted phone? Or is this supposed to take a stock phone without root and install CM automatically?
Sent from your phone. You should be careful where you leave that thing.
Click to expand...
Click to collapse
It just prepare for install using PC installer

Skipjacks said:
I just read the CM page and the Play store entry for the app.
I'm still not sure what this does. Doesn't his just make it easy to install cm on a previously rooted phone? Or is this supposed to take a stock phone without root and install CM automatically?
Sent from your phone. You should be careful where you leave that thing.
Click to expand...
Click to collapse
The installer is more for phones that are coming from stock without root... If you have root & recovery already, you can just flash 10.2 from sd card like any other rom. I've tried cwm and twrp install, twrp was easier for me because you can link the rom zip to the gapps zip and it'll flash it perfectly on the first install.
Very pleased with it, I only wish I did it sooner and got rid of the Samsung bloat lol.
Sent from my GT-I9505 using Tapatalk

IberianPrince said:
The installer is more for phones that are coming from stock without root... If you have root & recovery already, you can just flash 10.2 from sd card like any other rom. I've tried cwm and twrp install, twrp was easier for me because you can link the rom zip to the gapps zip and it'll flash it perfectly on the first install.
Very pleased with it, I only wish I did it sooner and got rid of the Samsung bloat lol.
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
What about the buglist (missing IR, ejected SD Card and a few more bugs)?
Do you have any experience with Calendar and Exchange (company mail account)?
Thanks :good:

Mittaa said:
What about the buglist (missing IR, ejected SD Card and a few more bugs)?
Do you have any experience with Calendar and Exchange (company mail account)?
Thanks :good:
Click to expand...
Click to collapse
Unfortunately I don't use the IR, or company email exchange, so I haven't been able to test it... Calendar works great, Google calendar... Personally I use aCalendar from play store, really nice interface... To be honest I really haven't noticed any bugs on 10.2 Release Candidate Snapshot. Only if I install Wanam Xposed, or some other ui changing module, they don't agree too well on CM roms.
Sent from my GT-I9505 using Tapatalk
---------- Post added at 10:36 AM ---------- Previous post was at 09:50 AM ----------
I've just tested an IR app, and it works fine, no issues. SD card working great too
Sent from my GT-I9505 using Tapatalk

Anybody have experience using Exchange Calendar (company account) as sole Calendar in CM 10.2 (I don't use Google calendar) ?
IberianPrince said:
Unfortunately I don't use the IR, or company email exchange, so I haven't been able to test it... Calendar works great, Google calendar... Personally I use aCalendar from play store, really nice interface... To be honest I really haven't noticed any bugs on 10.2 Release Candidate Snapshot. Only if I install Wanam Xposed, or some other ui changing module, they don't agree too well on CM roms.
Sent from my GT-I9505 using Tapatalk
---------- Post added at 10:36 AM ---------- Previous post was at 09:50 AM ----------
I've just tested an IR app, and it works fine, no issues. SD card working great too
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse

Cyanogenmod installer
I am incredibly nervous about installing it as I have mucked up when messing with my phone before. It was when I was a no of and I didn't really know about aosp or aokp roms and I had installed a rom that was based on 4.3 and for the tutorial I watched they were on stock Samsung firmware and it turns out you have to do different steps and I learnt that the hard way by getting in a boot loop. Of course I was too nervous to completely brick my phone attempting to self repair it so I forked out £50. I don't want anything to go wrong again. I know this is a lot simpler but I'm still nervous because if something DOES go wrong then I'm screwed. What do you guys think I should do. I really want cyanogenmod on my Samsung galaxy s4 I9505 lte but I'm nervous. Any help or advice would be incredibly appreciated, thanks

stuck on "DOWNLOADING system applications"
hey. new to this. maybe the wrong place. but im using the CM installer for my gt i9300(intl). works fine, but gets stuck while downloading system application. been like this for hours now. here's about my phone
.
bad servers or something i'm doing wrong ? cant really do much though, practically does everythin for u.

Hi there,
does it work without root?

i tried it last year works well but i didn't like cm so much...

HTC one S stuck flashing rom

I was trying to install a new rom on my phone. I managed to get s off and root it. The rom I wanted to install was [ROM][4.4.2][24 MAR] Codename Lungo I'm using twrp v2.4.3.0 I have hboot 2.13.0000 ( I don't know what that means haha) My phone is just stuck in a loop now after it failed to install that rom. What can I do? are there any windows programs I can use to flash the rom? Do i need to update something or do I need another rom? I'm pretty sure it's not a coaster yet. CHeers guys

skratchgonzo said:
I was trying to install a new rom on my phone. I managed to get s off and root it. The rom I wanted to install was [ROM][4.4.2][24 MAR] Codename Lungo I'm using twrp v2.4.3.0 I have hboot 2.13.0000 ( I don't know what that means haha) My phone is just stuck in a loop now after it failed to install that rom. What can I do? are there any windows programs I can use to flash the rom? Do i need to update something or do I need another rom? I'm pretty sure it's not a coaster yet. CHeers guys
Click to expand...
Click to collapse
Flash twrp 2.7.0.0 and try flashing the rom again. Android 4.4+ needs SElinux and twrp 2.4.3.0 doesn't support it. If it doesn't solve the problem that means you need to update your firmware.
One S cihazımdan Tapatalk kullanılarak gönderildi

ka_55 said:
Flash twrp 2.7.0.0 and try flashing the rom again. Android 4.4+ needs SElinux and twrp 2.4.3.0 doesn't support it. If it doesn't solve the problem that means you need to update your firmware.
One S cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
What do I use to flash it? it doesnt say hboot usb when I plug into my pc anymore , I was using the all in one htc app , do I use fastboot? my phopne no longer mounts when plugged in I can't trasnfer anything to it :s I can get into recovery tho.

skratchgonzo said:
What do I use to flash it? it doesnt say hboot usb when I plug into my pc anymore , I was using the all in one htc app , do I use fastboot? my phopne no longer mounts when plugged in I can't trasnfer anything to it :s I can get into recovery tho.
Click to expand...
Click to collapse
Woah thanks dude! It's back on now I gotta figure out how to install google apps and I'm good to go.Thanks a bunch!

skratchgonzo said:
Woah thanks dude! It's back on now I gotta figure out how to install google apps and I'm good to go.Thanks a bunch!
Click to expand...
Click to collapse
Sorry i couldn't answer your questions quickly. For google apps search gapps 4.4.2 from google and flash the zip as the same way you flashed the rom(means from twrp)
Sent from my One S

No need to be sorry haha thanks, I'm glad I was able to sort it. It seems like a pretty stable ROM. Getting Google maps and some other thing called something like this force close every now and then. Only real gripe is that I've lost beats and my music player :s might need to try another rom

skratchgonzo said:
No need to be sorry haha thanks, I'm glad I was able to sort it. It seems like a pretty stable ROM. Getting Google maps and some other thing called something like this force close every now and then. Only real gripe is that I've lost beats and my music player :s might need to try another rom
Click to expand...
Click to collapse
Glad to hear that you got things sorted. BTW if you want beats you've to use one of the sense based roms. AFAIK there isn't any rom with another base that has beats audio. I hope you find what you need
Well have a good day and happy flashing!!!
Sent from my One S

ka_55 said:
Glad to hear that you got things sorted. BTW if you want beats you've to use one of the sense based roms. AFAIK there isn't any rom with another base that has beats audio. I hope you find what you need
Well have a good day and happy flashing!!!
Sent from my One S
Click to expand...
Click to collapse
Can be you recommend any? I'm still wanting to have the latest Android, and increased battery life is something I'm after too. I'm surprised you can't flash beats too!

skratchgonzo said:
Can be you recommend any? I'm still wanting to have the latest Android, and increased battery life is something I'm after too. I'm surprised you can't flash beats too!
Click to expand...
Click to collapse
Actually i can't recommend a sense based rom cause i don't use them for quite some time and i don't want to misslead you. Maybe someone else here xan recommend you one.
Sent from my One S

★ [MOD] ◢ PurePerformances™X ◣ | Golden Edition | Scary performances on Android

★ [MOD] ◢ PurePerformances™X ◣ | Golden Edition | Scary performances on Android
Hi
I tried this hack with KK 4.4.2 stock ROM. It has made my device very snappy. Overall system performace has improved a lot.
I am sharing this for our Moto X forum members wanting to try.
Original Thread:
http://forum.xda-developers.com/showthread.php?t=2360670&nocache=1
Hope it helps.

working good,thanks

So many of those build.prop lines are confirmed useless...
I'll test it myself anyway lol. Thanks.

Wow it works definitely snappy nice find.

trying it, seems to do the trick

Anytime I flash a mod like this and it changes my animations to .5 I am suspicious if its actually doing anything more than that
Sent from my XT1060 using Tapatalk

My animation was already .5 and I noticed a more fluid ui

I changed my animation back to 1.0 and it does seem more fluid. [emoji57]

Trying it now, will report back
Sent from my XT1058 using Tapatalk

It breaks AdAway, so that's pretty annoying

How can i know whether it is installed successfully?

piccit said:
It breaks AdAway, so that's pretty annoying
Click to expand...
Click to collapse
Yes. Initially it does break AdAway.. Once flashed this hack I reinstalled Adaway and also flashed Mother of All adblocking from http://forum.xda-developers.com/showthread.php?t=1916098.
Hope it helps. It stops ad but still there are very few app on which AdAway never worked (eg. "Ditch Last Seen Whasapp")..

kenosis said:
How can i know whether it is installed successfully?
Click to expand...
Click to collapse
You will surely see snappy performance of your device. Seeing is believing..

kenosis said:
How can i know whether it is installed successfully?
Click to expand...
Click to collapse
Go to /etc with any root explorer app and if you see a folder called Crossbreeder you're good. Recovery script is not very descriptive as to what it's doing so I found myself checking for that as well lol.
It makes a difference in speed for sure. Remains to be be seen if it breaks anything. No issues with the usual sms, mms, calls, active notifications, touchless controls or Google now from my (minimal) testing.
Sent from my XT1058 using Tapatalk

So I decided to flash the pureperformance uninstaller to see if I could tell that much of a difference and now my tether doesn't work. Tether worked pre uninstaller. You think it changed something in the build. prop? Any thoughts?

I do not like the fact it enables the swap partition in Android everyone knows the constant read and write of flash or nand memory will reduce its life some what that is why you disable all swap files on computers with SSD's
But other then that looks nice..

Mayze23 said:
So I decided to flash the pureperformance uninstaller to see if I could tell that much of a difference and now my tether doesn't work. Tether worked pre uninstaller. You think it changed something in the build. prop? Any thoughts?
Click to expand...
Click to collapse
Second this, lost tether as well. Had to restore a nandroid, I didn't see any performance differences anyway with this already speedy phone running krypton. Always make a nand folks.

ConstantHero said:
Second this, lost tether as well. Had to restore a nandroid, I didn't see any performance differences anyway with this already speedy phone running krypton. Always make a nand folks.
Click to expand...
Click to collapse
I third this. I reflashed my system partition over. This "mod" didn't do me any good and disabled ad block. Waste of time.

If you want adaway to work with this, go to system/etc/crossbreeder and delete
ENABLE_ADBLOCK
DISABLE_ADBLOCK
HOSTS
START_ADBLOCK
Sent from my XT1060 using Tapatalk

ConstantHero said:
Second this, lost tether as well. Had to restore a nandroid, I didn't see any performance differences anyway with this already speedy phone running krypton. Always make a nand folks.
Click to expand...
Click to collapse
I'm wearing my dunce hat now for not making a nandroid. I reflashed to stock and my tether still doesn't work. I'm going to try and do a complete wipe and start over. I would stay away from this mod for those thinking about flashing it.

Low Mic Volume when on Speaker

I am very confused and I really need some help.
I have been installing some different roms and I tried to edit the mixer_paths file editing the volumes.
BEFORE (until yesterday) I had low mic volume (the others couldn't hear me) while NOT being on speaker. While when I was on speaker during a call the mic was working perfectly and the others could hear me.
TODAY I have the exact OPPOSITE problem. When I am NOT on speaker the others can hear me perfectly and the mic works fine. When I start the speaker the mic got totally muted and the others can't hear me!
So far I have found that the DEC4 value in the mixer paths file increase the mic volume when NOT on speaker.
Does anyone knows how can I raise the volume of the mic while I am on speaker?
I am using hte SULTANXDA CM13 rom.
thanks!

My mic worked and works good when im not on the speaker. But when i use the speaker its pretty bad and the other side cant really understand me. This has been a thing for me since i own this phone. No matter what ROM i tried from COS (11 & 12) to CM Official Nightlies (12 & 13) or even unofficial Builds (e.g. SultanXDA). Also i tried different Kernels and didnt mention any effect on this issue. I think it has something to do with echo cancellation.
So i dont know how you managed to have the opposite problem before yesterday, but the problem you have now is a normal thing for me and meanwhile im used to it ^^

Any solution for this?

experiencing the same.
Sent from my A0001 using Tapatalk

I have the same problem, if hold the phone near my mouth, the other person hears me, if not, no sound.

Same here. I think I need to do a support email with them. It just happened a few weeks ago and I tried everything but going to oxygen os

they told me to update to the latest version... updated to thhe latest cm or cos offical roms... oxygen wouldnt flash for whatever reason. ill try a little more later. im gonna keep trying every weekend for a few months and if i dont get it going, i might just buy another op3. i use my speakerphone for work a lot

red5pade said:
they told me to update to the latest version... updated to thhe latest cm or cos offical roms... oxygen wouldnt flash for whatever reason. ill try a little more later. im gonna keep trying every weekend for a few months and if i dont get it going, i might just buy another op3. i use my speakerphone for work a lot
Click to expand...
Click to collapse
please update after u upgrade.
thanks
Sent from my A0001 using Tapatalk

TheNerd said:
please update after u upgrade.
thanks
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Yep, oxygen 2.1.4 fixed it. I had a hard time flashing it because I was f2fs. Just make sure you download it to your device and then follow the steps. Hope you get yours fixed

Cancel that, I flashed twrp and went to m82 tugapower and now its not working again. I wonder if this is because of cm13 crap

red5pade said:
Cancel that, I flashed twrp and went to m82 tugapower and now its not working again. I wonder if this is because of cm13 crap
Click to expand...
Click to collapse
so speakerphone mic works well on oxygenOS but not on CM forks?
interesting. I would have flashed Oxy if it was Marshmallow based for 1+1
Sent from my A0001 using Tapatalk

TheNerd said:
so speakerphone mic works well on oxygenOS but not on CM forks?
interesting. I would have flashed Oxy if it was Marshmallow based for 1+1
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Yep. I'm tired of flashing things. Just want something that works. Wish there was a good ROM that was free of cm crap. They're always breaking crap

TheNerd said:
so speakerphone mic works well on oxygenOS but not on CM forks?
interesting. I would have flashed Oxy if it was Marshmallow based for 1+1
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
So I flashed a few ROMs and it seems all ROMs based on cm are having the issue. I flashed darkobas or w/e and everything is working great. Hope that helps.

red5pade said:
So I flashed a few ROMs and it seems all ROMs based on cm are having the issue. I flashed darkobas or w/e and everything is working great. Hope that helps.
Click to expand...
Click to collapse
can you link the thread where you found the darkobass you flashed please?
or w/e
Sent from my A0001 using Tapatalk

TheNerd said:
can you link the thread where you found the darkobass you flashed please?
or w/e
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
I had to get rid of darkobus... It would start to lag a lot. Try saosp
http://forum.xda-developers.com/oneplus-one/development/rom-saosp-m-t3267790
Make sure you have a twrp version older than 3.x. Also, read how and what to flash on the first post. Xposee and gravitybox is great on this rom to get the features it doesn't have. It's a pretty bare bones ROM... But at least things work.
I can confirm speaker mic is working with this ROM though. Used it this morning

red5pade said:
I had to get rid of darkobus... It would start to lag a lot. Try saosp
http://forum.xda-developers.com/oneplus-one/development/rom-saosp-m-t3267790
Make sure you have a twrp version older than 3.x. Also, read how and what to flash on the first post. Xposee and gravitybox is great on this rom to get the features it doesn't have. It's a pretty bare bones ROM... But at least things work.
I can confirm speaker mic is working with this ROM though. Used it this morning
Click to expand...
Click to collapse
DUDE THANK YOU SO MUCH!!!
after a year with this issue, darkobass finally solved it.
people can hear me when I switch to speakerphone.
I wonder why it doesn't work on CM.
thanks!!!
Sent from my A0001 using Tapatalk

TheNerd said:
DUDE THANK YOU SO MUCH!!!
after a year with this issue, darkobass finally solved it.
people can hear me when I switch to speakerphone.
I wonder why it doesn't work on CM.
thanks!!!
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
NP bro. I had an issue with dark not taking pictures. Never reported it but may have been patched by now

Share H901 custom stock rom. Updated Tizen 6.0

Here are two stock custom rooted roms by Vietnamese team. Just sharing the links.
REMEMBER back up your recent rom first by twrp
I use google chrome to translate the page to English
Tizen V.6.0 H90120L
http://lgviet.com/forum/threads/tỔng-hỢp-tizen-rom-cook-mm-6-0-h901-updated-v6-0-h90120l.61474/
RadeonMaya V.4.0 H960A20M
http://lgviet.com/forum/threads/rom-radeonmaya-t-mobile-h901-v4-0-update-19-11-2016.58894/

Is this ROM from a trustworthy source?
Sent from my LG-H901 using XDA-Developers mobile app

iphone5sf said:
Here is one stock custom rooted rom H90120L by Vietnamese Tizen team.
Back up your recent rom first by twrp
I use google chrome to translate the page to English
I have installed it and it runs perfect and smoothly.
http://lgviet.com/forum/threads/ton...6-0-t-mobile-h901-updated-v3-0-nen-20l.61474/
Click to expand...
Click to collapse
How is it going? I actually like the G5 port. Please confirm everything is going well cos I would love to use it. Please tell me how you see the ROM.
My only fear is that I noticed that if one is to revert to stock there are other files to be flashed. Being the language is in Vietnamese if a mistake is made, then hardbrick will ensue.
Thanks

zayidhs said:
How is it going? I actually like the G5 port. Please confirm everything is going well cos I would love to use it. Please tell me how you see the ROM.
My only fear is that I noticed that if one is to revert to stock there are other files to be flashed. Being the language is in Vietnamese if a mistake is made, then hardbrick will ensue.
Thanks
Click to expand...
Click to collapse
You can use Google Chrome to open the page and use translate the page to English, the rom installation is English. I have installed and run good and smoothly. You need to back up rom and then full wipe, and install rom. There is instruction on V3.0 section. I just use as normal use so I am not sure how is perfect or not. Any other user has idea?

iphone5sf said:
You can use Google Chrome to open the page and use translate the page to English, the rom installation is English. I have installed and run good and smoothly. You need to back up rom and then full wipe, and install rom. There is instruction on V3.0 section. I just use as normal use so I am not sure how is perfect or not. Any other user has idea?
Click to expand...
Click to collapse
I've downloaded the ROM, will flash later when I get back from work. Will let you know how it goes....

This rom is super cool. Im running a different one that's in the same section, it seems to have the UI more accurate like the V20. The devs there seem to be hella active. Ive seen updates every few days for both roms. Runs smooth and battery life is much better than stock in my opinion, cant tell if its a placebo though so Id recommend you test yourself.

iphone5sf said:
Here is one stock custom rooted rom H90120L by Vietnamese Tizen team.
Back up your recent rom first by twrp
I use google chrome to translate the page to English
I have installed it and it runs perfect and smoothly.
http://lgviet.com/forum/threads/ton...6-0-t-mobile-h901-updated-v3-0-nen-20l.61474/
Click to expand...
Click to collapse
Q: Can you roll back to 20J after trying 20L, or will it brick?

martinsavvy said:
This rom is super cool. Im running a different one that's in the same section, it seems to have the UI more accurate like the V20. The devs there seem to be hella active. Ive seen updates every few days for both roms. Runs smooth and battery life is much better than stock in my opinion, cant tell if its a placebo though so Id recommend you test yourself.
Click to expand...
Click to collapse
There does seem to be a lot going on there! But there's only one 20l ROM thus far, right?
Sent from my LG-H901 using XDA-Developers mobile app

I dirty flashed the 20l ROM over stock rooted 20l, it booted up fine and seems fine so far.
Sent from my LG-H901 using XDA-Developers mobile app

HelloG3_MotoNoMore said:
Q: Can you roll back to 20J after trying 20L, or will it brick?
Click to expand...
Click to collapse
I saw a post in the Dev section that stated both 20J & 20L are both set to Anti-Rollback version 2. As long as you stay within the same anti-rollback version then you should be able to move back and forth between 20J & 20L. I believe 20E is Anti-Rollback version 1.
I am about to move back to 20J and will let you know how it goes.
EDIT: I was able to go back to 20J with no problem
Do we need to modify any of the APN's or build.prop for use on Verizon in US? My phone says 4G but keeps dropping to 3G and then sometimes it says H...

martinsavvy said:
This rom is super cool. Im running a different one that's in the same section, it seems to have the UI more accurate like the V20. The devs there seem to be hella active. Ive seen updates every few days for both roms. Runs smooth and battery life is much better than stock in my opinion, cant tell if its a placebo though so Id recommend you test yourself.
Click to expand...
Click to collapse
Yeah, they are active but it is expected since they have a lot of sales in the Asian market. Can you please get me the link to the V20-like ROM?
Ty

Can someone say whether this ROM has init.d support? You can tell because there will be a folder called init.d at /system/etc/init.d. It may or may not be empty. If there is something in there then it's a pretty good indication. I usually drop a file in there that will run on boot and produce a log file in /data. If that log file doesn't appear, then no init.d support is present.

AnonVendetta said:
Can someone say whether this ROM has init.d support? You can tell because there will be a folder called init.d at /system/etc/init.d. It may or may not be empty. If there is something in there then it's a pretty good indication. I usually drop a file in there that will run on boot and produce a log file in /data. If that log file doesn't appear, then no init.d support is present.
Click to expand...
Click to collapse
Can't find it using root browser, though it maybe me. Let's wait for another person to confirm.

I'll go ahead and assume the answer is no unless someone confirms otherwise. If I knew how to mod kernels, ramdisks, etc then I would add it myself. There is a universal init.d app that can add artificial support for this in the meantime, so not a huge deal. But kernel/ROM support for it is superior.

zayidhs said:
Yeah, they are active but it is expected since they have a lot of sales in the Asian market. Can you please get me the link to the V20-like ROM?
Ty
Click to expand...
Click to collapse
I believe this is the ROM you are looking for: RadeonMaya
I've had it installed for about 2 hours now and all is well.

V. 4.0 Back up first. My idea for easier update, wipe Dalvik / System / Cache and then install the 4.0
For Clean install, wipe Dalvik / System / Data / Cache then install

Sippi4x4man said:
I believe this is the ROM you are looking for: RadeonMaya
I've had it installed for about 2 hours now and all is well.
Click to expand...
Click to collapse
How did you extract this? The apps I used on the phone say a password is required. And it's a TWRP backup to be restored?
Edit: got it from the thread there! Duh
Sent from my LG-H901 using XDA-Developers mobile app

YrrchSebor said:
How did you extract this? The apps I used on the phone say a password is required. And it's a TWRP backup to be restored?
Edit: got it from the thread there! Duh
Sent from my LG-H901 using XDA-Developers mobile app
Click to expand...
Click to collapse
Glad you got it worked out, it took me a minute to figure out the password also lol. So far I've noticed my data speeds are slow and I only see 4G and not 4G LTE at the top so far....

Sippi4x4man said:
Glad you got it worked out, it took me a minute to figure out the password also lol. So far I've noticed my data speeds are slow and I only see 4G and not 4G LTE at the top so far....
Click to expand...
Click to collapse
Ah ok lol haha, cool. All my andoid apps on the phone are failing to extract it, even with the password.
But as for the LTE, I think you may need to edit the build.prop if it isn't set up to be a Tmobile device. Or someone posted a tmo build.prop file in the thread about getting the 20l OTA, I believe
Sent from my LG-H901 using XDA-Developers mobile app

YrrchSebor said:
Ah ok lol haha, cool. All my andoid apps on the phone are failing to extract it, even with the password.
But as for the LTE, I think you may need to edit the build.prop if it isn't set up to be a Tmobile device. Or someone posted a tmo build.prop file in the thread about getting the 20l OTA, I believe
Sent from my LG-H901 using XDA-Developers mobile app
Click to expand...
Click to collapse
If you replace the build.prop in this rom with a stock one it will get stuck at LG and won't boot any further...at least in my experience. I'm sure it's something easy but who knows