Introduction
Material7 Rom's based on official Samsung SM-G901F CPE1 for maximum stability, but modified, debloated and optimized for best battery life & performances
Click to expand...
Click to collapse
Images
Rom features
- Rooted (super su v2.74)
- Busyboxed (v.1.242)
- Deodexed
- Zipaligned
- Debloated
- De-knoxed
- Kernel Init.d support
- Build prop tweaks
- modified CSC
- Multiwindow
- SD Card fix
- Android N fonts & emojis
- Android N Sounds
- S7 touchwiz
- S7 keyboard
- S7 phone
- S7 contacts
- S7 emails
- S7 music
- S7 gallery
. . .
Removable apps :
- Viper4android FX
- AdAway 3.0.2
- Terminal emulator 1.0.70
- Xposed installer 3.0 alpha 4
- Amplify
- SD Maid
- Power menu
Click to expand...
Click to collapse
Updates
New in version 1.1
- S7 keyboard (don't forget to set your language in settings)
- SD Card fix
- Modified CSC
. . .
Click to expand...
Click to collapse
New in version 1.2
- Theme support
- Assert fix
. . .
Click to expand...
Click to collapse
New in version 1.3
- More debloat
- More CSC tweaks
- More Build.prop tweaks
- Faster interface
- android N Sounds
- android N fonts & emojis
- SuperSU 2.74
- Viper4android FX
- Amplify
- SD Maid
- Power menu app (no physical buuton required)
- Partially working theme store removed
- bugs fix
. . .
Click to expand...
Click to collapse
Material7 Full V1.O
- Rooted (super su v2.74)
- Busyboxed (v.1.242)
- Slightly Debloated (removed bloats are in the rom zip)
- De-knoxed
- Kernel Init.d support
- Build prop tweaks
- modified CSC
- Android N Sounds
. . .
Click to expand...
Click to collapse
Installation instructions
CPE1 bootloader and modem required
1. Copy ROM, xposed & PROJECT SKYNET Genesys TX7 to SD-Card
2. Reboot recovery
3. Wipe dalvik, system, data, cache
4. Install ROM from SD-Card
5. Finish installation
6. Reboot recovery
7. Install xposed & PROJECT SKYNET Genesys TX7
8. Reboot when finished
Optional :
9. Open terminal emulator
In the terminal enter the following commands (without (press enter))
su (press enter)
menu (press enter)
4 (press enter)
2 (press enter)
exit (press enter)
exit (press enter)
Click to expand...
Click to collapse
Downloads
Bootloader, modem, rom...
https://mega.nz/#F!mcJDQbQb!dEfkPXQRpS9r6fA1Ov-GJQ
Click to expand...
Click to collapse
Bugs
- No vibrations in the S7 keyboard
Credits
- SuperR's kitchen
- Wanam
- Viper4android team
- k1ks
- poccy
- Chainfire
- Jack Palevich
- nkming
- darken
. . .
Click to expand...
Click to collapse
Is this compatible with SM-G900F?
rhong said:
Is this compatible with SM-G900F?
Click to expand...
Click to collapse
no
Hi
Thanks for your work on this rom.
Have you tried installing Viper4Android FX?
@Golgotronx
Great that we get some devs developing for our device. Can you please explain me for what the option in terminal is useful?
Does this rom have theme support?
Gesendet von meinem SM-G901F mit Tapatalk
@Hypedblank
I don't try Viper4android FX, test & feedback
@putti71
thanks, no theme support in this version...
For more script informations, look at
http://forum.xda-developers.com/android/software-hacking/android-l-booster-1-soon-t3030796
looks nice! can you integrate S7 keyboard in the next build? thanks
thanks for this. installed this. very superb rom. will feedback later
Nice rom.
The dialer doesn't support hungarian language.
Hypedblank said:
Hi
Thanks for your work on this rom.
Have you tried installing Viper4Android FX?
Click to expand...
Click to collapse
I flashed ViperAtmos mod and it's working great . You have to disable soundalive
How is batterylife?
Sent from my SM-G901F using XDA-Developers mobile app
jeroenwal said:
How is batterylife?
Sent from my SM-G901F usin
Click to expand...
Click to collapse
After one day "normal using" i have 52% left. It`s very good:good:
Boot / Reboot is very quick, system runs fast and smooth.
Thanks !
jeroenwal said:
How is batterylife?
Sent from my SM-G901F using mobile app
Click to expand...
Click to collapse
I have 3hrs of screen on at 50%, my phone never lasted like this before ! I'm using the Rom without skynet but with my own-compiled kernel with interactive governor and zen decision.
I might release it for the community if I find time to add more features (or why not directly included in this Rom ? @Golgotronx ) Sorry for hijacking the thread, very good work mate
licha26 said:
I flashed ViperAtmos mod and it's working great . You have to disable soundalive
Click to expand...
Click to collapse
@licha26
Thanks for the feedback, i'll test your kernel with pleasure...
New version this night with
Theme support
Modified CSC
SD Card fix . . .
Could you also add the s7 keyboard...it's awesome...imo.
I never heard of project skynet but in the op it says that it already has an adblocker...so do you still need adaway?
This rom is heavily debloated. But i really like it. Waiting for new update kudos to you dev.
Sent from my SM-G901F using XDA-Developers mobile app
Golgotronx said:
@licha26
Thanks for the feedback, i'll test your kernel with pleasure...
New version this night with
Theme support
Modified CSC
SD Card fix . . .
Click to expand...
Click to collapse
Great news!!!!! THANKS!!!!!
:good:
licha26 said:
I have 3hrs of screen on at 50%, my phone never lasted like this before ! I'm using the Rom without skynet but with my own-compiled kernel with interactive governor and zen decision.
I might release it for the community if I find time to add more features (or why not directly included in this Rom ? @Golgotronx ) Sorry for hijacking the thread, very good work mate
Click to expand...
Click to collapse
great news ..:laugh:
at the end you have built your kernel as you said, I'm really pleased.
I hope to try it as soon as possible
licha26 said:
I flashed ViperAtmos mod and it's working great . You have to disable soundalive
Click to expand...
Click to collapse
Great!, do you have a link?
mirkolo said:
great news ..:laugh:
at the end you have built your kernel as you said, I'm really pleased.
I hope to try it as soon as possible
Click to expand...
Click to collapse
Sent from my SM-G901F using XDA-Developers mobile app
Handeman707 said:
Great!, do you have a link?
Click to expand...
Click to collapse
A link for what ?
Related
[ROM][MIUI V5 4.6.20 with LTE and multilanguage][OTA][Stable, Battery & EyeCandy!]
MIUI V5 4.6.20, multilanguage, with LTE!
Why did I choose to make a 4.1.1 Touchwiz MIUI, and not a 4.2.2 Cyanogenmod MIUI?
The anwser is simple : the version, in MIUI doesn't matter, between both.
4.1.1 will be more stable, more efficient, better and with a great battery life, than a 4.2.2 which is on early beta state.
With Touchwiz based MIUI, you can install Samsung Apps.
It's based on official MIUI rom, so no FC, no bug and so on.
First boot could take more than 2mn.
Downloads Link
Full rom : 4.6.20 - TouchWiz Based Release for i9305 (The most stable, battery saving, and fast.)
Changelog : http://en.miui.com/thread-24977-1-1.html
What's good in my version?
- A lot of language
- Weekly OTA
- LTE pre-enable
- CRT OFF (not buggy with lockscreen.)
- Emoji iOS 7
- Added MIUI v5 3.6.x wallpaper (so what?!)
- Some icons animations
- Window animations
- Way more V5 style icons
- Stock Kernel
- Removed: Gamecenter, SuperMarket, Samsung VideoPlayer, Updater, PowerOn Sound, Water Touch Sound
- Added : Play Store removable, WSM Tools removable. (framework of WSM framework not installed, launch the app and install if you want)
- No bug seen for the moment.
How to install
You have to installed a custom Recovery. I highly recommend PhilZ Touch. http://forum.xda-developers.com/show....php?t=2120595
Copy the release you choosed in your external sd card. (exemple, STABLE_MIUI-i9305-4.6.20-mod.zip )
Launch recovery (Volume Up + Home + Lock )
Wipe Data/Factory.
Go to "Install zip"
"Choose zip from external sdcard"
Now navigate to the MIUI zip.
Push Yes.
When it's finish, come back to Menu.
Go to Advanced.
"Wipe Dalvik Cache"
When it's finish, you have a fully working MIUI!
How to enable LTE
- Open the WSM Tools app (include), and click Install.
- Reboot.
- Open WSM Tools, and look if Intelli3G is check.
- Open Intelli3G, and apply this configuration :
- LTE should be enable now.
For check, go to Settings, Mobile Network, Network Type Selection, and check if you have this screen :
If yes, LTE is enable.
Edit 4.6.13
Old Things
TouchWiz Release
STABLE_MIUI-i9305-4.6.13-mod.zip
https://mega.co.nz/#!6JFH0J4D!P-LBmH-zBv-mAyH11bA6yh13K1DMlUV-yrspEx7buFw
STABLE_MIUI-i9305-4.4.25-mod.zip
https://mega.co.nz/#!GJ0wCJba!7aXadeQ0HcujzPxgOH-Oys6xu17VmwMaw2BfRJglXU8
STABLE_MIUI-i9305-4.4.4-mod.zip
https://mega.co.nz/#!rE9BgTYa!azW3XEUK8nwYX-fi7MGeenSGnLX9QxTXy6eBYugNP1k
multi_MIUI-i9305-4.3.28-mod.zip 578.8 MB
https://mega.co.nz/#!rZ1jAQAb!LlBC6RDGKpIFf9IUCeBDXvKSY8yJ76YEnM4OT7iZPhg
STABLE.MIUI_I9305_4.1.24-mod (530.3 MB)
https://mega.co.nz/#!iQVlmL4B!eDe1FcouBz6k-9E35SniF0pTsiFzzEPvaJF1cY1cVic
STABLE.MIUI_I9305_3.9.6_LoP_Toggle2G-resigned.zip (499.2 MB)
https://mega.co.nz/#!qN80EK5D!K8RUvkWW5w2KLKr5HDBnEEn-vMwlbraKpXNrtE1NVO8
STABLE.MIUI_I9305_3.8.30_LoP_Toggle2G-resigned.zip (508.4 MB)
https://mega.co.nz/#!TZMH3CqR!CVwDTTDktCg_t_yly0i8fFYnJJtafugzJqM78vil1X8
MIUI_I9305_3.8.2_Lo-P-Toggle2G-resigned.zip (721.0 Mo)
https://mega.co.nz/#!DNkAGZ7S!UWJ1UyxM4-SVCF2b3Wcq6G2Ge7MAiE4u2yS6d82a4js
MIUI_I9305_3.8.9_Lo-P-Toggle2G-resigned.zip (523.0 Mo)
https://mega.co.nz/#!WFknHZxC!P
1r10Ym6RSgNI05cH_JKyC2GqU9erh1gDjzNhFyktY
MIUI_I9305_3.8.16_LoP.zip-Toggle2G-resigned.zip (532.3 MB) (BUGGY)
https://mega.co.nz/#!ycNHGRIB!UFHdA2tkfto154M1Di8wfmNuzqgRHJVKTqe-2ygOg20
MIUI_I9305_3.8.23_LoP.zip-Toggle2G-resigned.zip (712.4 MB) (BUGGY)
https://mega.co.nz/#!rAUDzD5Q!CPfOw39W8X0IIszZ3JTf8De_vnIMa4y9aS8A__wF6bU
STABLE.MIUI_I9305_3.8.23_LoP_Toggle2G-resigned.zip *(516.5 MB)
https://mega.co.nz/#!6EsU1SAS!fi5VGQpQIb2xV_osIi3JOmmv2Z8wpP1dkuMNGUf2qjE
CyanogenMod Release
STABLE.CM.MIUI_3.8.23_4.2.2_LoP.zip (272.1 MB)
https://mega.co.nz/#!LNNwHABZ!YvOvMz8B11JgJDWmGy1V8Db4vxtqB0o2Ye0ss1Ai0UI
CM.MIUI_3.8.9_4.2.2_LoP.zip (256.0 Mo)
https://mega.co.nz/#!CZdmUaja!U4cs-XW4u9geJVAaocxplV3rA5w5docwFBOHqau7ks4
CM.MIUI_3.8.16_4.2.2_LoP.zip (264.2 MB)
https://mega.co.nz/#!LUcAGARa!e12xOg_eeii7my1bbg3ZPnn86NkiRjZ65vdXiBY3iHg
Port I9300 MIUI to I9305
Credits
BurgerZ, XDA member who made WSM Tools.
Member of MIUI forum, who ported the rom for i9305 http://www.miui.com/thread-1143407-1-1.html
Xiaomi, for translation of MIUI and awesome work.
wilsonwa, for iOS all emoji http://forum.xda-developers.com/show....php?t=2395487
ZipAlign - V5 extented theme
GPS Fix by machotecba
I9300 base by Xiaomi.eu
AppHider by Thinkyeah https://play.google.com/store/ap ... yeah.apphider&hl=en
Intelli3G by Voidvapps https://play.google.com/store/ap ... pps.intelli3g&hl=en
Don't hesitate to tell me if you're an author in the credits and you don't want your software/theme/mod in my ROM. I'll understand it.
Code:
* I am not responsible at all for bricked devices, and all issue of damage.
* You do flashing my rom at your own risk.
Thanks a lot Bro' you are a boss and this rom work like a charm!!!
Updated to 3.8.9.
Best Miui on our device! Great work!
I test the 3.8.2 for 4 hours and there is only one thing, if there is a 4 way reboot which supports recovery!
Now i will test the 3.8.9 !!!
:fingers-crossed:
Luke04 said:
Best Miui on our device! Great work!
I test the 3.8.2 for 4 hours and there is only one thing, if there is a 4 way reboot which supports recovery!
Now i will test the 3.8.9 !!!
:fingers-crossed:
Click to expand...
Click to collapse
Thanks you for use my rom, really
I really don't know how to enable this... I have to do some research!
install in progress thank you once again !!!
laskarface said:
install in progress thank you once again !!!
Click to expand...
Click to collapse
You're welcome!! :highfive:
Please don't forger to re-enable Toggle2G by ticking "Auto-manage" on app.
Oh yes !!! I' don't forget it .... you are a mother for me loool
laskarface said:
Oh yes !!! I' don't forget it .... you are a mother for me loool
Click to expand...
Click to collapse
My dev son.
3.8.9 is working like charm.
Great work, Lo-P!
I got a 3 way reboot for booting in recovery working. Now its perfect!
Luke04 said:
3.8.9 is working like charm.
Great work, Lo-P!
I got a 3 way reboot for booting in recovery working. Now its perfect!
Click to expand...
Click to collapse
Cool ! Thanks !
Please tell me your tip for enable 3 Way boot, i'll make a flashable zip !
And, btw, I'll keep this rom update.
Sent from my GT-I9305 using xda premium
Youve got a pn!
Luke04 said:
Youve got a pn!
Click to expand...
Click to collapse
Link added with credits on "Optionnal".
Thanks!
is gps work flawlessly？
Sent from my GT-I9305 using xda premium
Lo-P said:
Link added with credits on "Optionnal".
Thanks!
Click to expand...
Click to collapse
Its great to have Lte activated. Should we need to flash the kernel again as I am using Yank's
kernel. How about the battery life and the tempreture as well. Rom
downloading....
adrianmak said:
is gps work flawlessly？
Sent from my GT-I9305 using xda premium
Click to expand...
Click to collapse
Just tried geolocalization with Weather apps. It works with GPS.
Cowboy88 said:
Its great to have Lte activated. Should we need to flash the kernel again as I am using Yank's
kernel. How about the battery life and the tempreture as well. Rom
downloading....
Click to expand...
Click to collapse
Whatever the kernel. Choose which you want ! But the rom is based on stock, with stock kernel. The battery life is just better than TouchWiz. The temperature is the same too. Enjoy!
Sent from my GT-I9305 using xda premium
Lo-P said:
Link added with credits on "Optionnal".
Thanks!
Click to expand...
Click to collapse
Lo-P said:
Just tried geolocalization with Weather apps. It works with GPS.
Whatever the kernel. Choose which you want ! But the rom is based on stock, with stock kernel. The battery life is just better than TouchWiz. The temperature is the same too. Enjoy!
Sent from my GT-I9305 using xda premium
Click to expand...
Click to collapse
Tks and will install while back home
Going to make this rom with CyanogenMod 10.1 base.
Stay tunes!
(thanks to jing95916 )
Lo-P said:
Going to make this rom with CyanogenMod 10.1 base.
Stay tunes!
(thanks to jing95916 )
Click to expand...
Click to collapse
Its amusing and what is the target complete date？
I AM NOT THE DEVELOPER I AM JUST SHARING THIS AMAZING ROM
ROM Information
- Base on Note 3 N900DDEBOB1
- Rooted / Deodexed / Zipaligned / Busybox / Deknoxed
- Multiple Languages
How to install...?
- >> wipe data, cache, Dalvik cache
- >> X-ROM install V2 Note4 S6
- >> reboot
ROM Features
- 3 DOT Menu
- N4 Emergency Launcher
- N4 UPSM
- N4 SideKey
- N4 Setting
- S5 Toolbox
- S6 Toucwiz Launcher
- S6 Easy Launcher
- S6 Wallpaper Picker
- S6 Splanner
- S6 Weather
- S6 Music
- S6 My File
- S6 Browser
- S6 Galaxy Apps
- S6 Calculator
- S6 Email
- S6 Smart Remote
- S6 S-Health
- S6 Keyboard
- S6 Setup Wizzard
- S6 Font
- S6 Ringtone
- S6 Style SystemUi
- And More
Download Link
G-Drive Link
Other MODS
1 - Stock Setting Flash This
2 - S6 Launcher With Theme Support 5*5 Flash This
Bugs
1 - Some Lockscreen Effect Doesn't Work
All CREDIT Goes To Raden Mas Yoga & @Albe95 @alemtro
Waiting... Please add some screenshots..
Screenshot Of This Rom
Screenshot Of This Rom
Why is there no Arabic language.
Wow this rom from a member of note 3 indonesia
this is not even a rom it just port some S6 apps from other users and themes to official firmware rom not feature nothing ...
sksarfaraz said:
Screenshot Of This Rom
Click to expand...
Click to collapse
can you share statusbar like screenshot number 4
kaizer hanz said:
can you share statusbar like screenshot number 4
View attachment 3423222
Click to expand...
Click to collapse
Here its is
only n900 rom which is perfect but don't support audio mods
Actually, I love the ROM, everything is perfect. I like especially that it's not too much modified. Scrren Mirroring also works. There is only one problem: I have with the SE Linux mode changer tries to switch to permissive, but it was not working. That's why I've installed pekaka kernel, then I could change to permissive. I thought it would help me if wants to install audio mods. Unfortunately that doesnt make sense. I've installed various audio mods, but nothing has worked.
exampe :
Dolby Digital : http://forum.xda-developers.com/galaxy-note-3/themes-apps/dolbydigitalplus-ported-t3075366
Dolby Atmos : http://forum.xda-developers.com/android/apps-games/mod-dolby-atmos-t3109446
Walkman : http://forum.xda-developers.com/showthread.php?t=2730431
NuPlayer is turned off.
SoundAlive has been deactivated.
SELinux is set to permissive.
I hope you will quickly find a solution.
Good Luck
you can flash pekaka rom it working 100% + fast charge 2100mhz
sksarfaraz said:
Here its is
Click to expand...
Click to collapse
no I mean, is status bar with 3minitbattery like icon signal, wifi and battery with dot/circle like iOS..
flashing zip maybe.. ?
Voiceless Location said:
Actually, I love the ROM, everything is perfect. I like especially that it's not too much modified. Scrren Mirroring also works. There is only one problem: I have with the SE Linux mode changer tries to switch to permissive, but it was not working. That's why I've installed pekaka kernel, then I could change to permissive. I thought it would help me if wants to install audio mods. Unfortunately that doesnt make sense. I've installed various audio mods, but nothing has worked.
exampe :
Dolby Digital : http://forum.xda-developers.com/galaxy-note-3/themes-apps/dolbydigitalplus-ported-t3075366
Dolby Atmos : http://forum.xda-developers.com/android/apps-games/mod-dolby-atmos-t3109446
Walkman : http://forum.xda-developers.com/showthread.php?t=2730431
NuPlayer is turned off.
SoundAlive has been deactivated.
SELinux is set to permissive.
I hope you will quickly find a solution.
Good Luck
Click to expand...
Click to collapse
Selinux Changer will not work on Stock based kernel coz of knox enable build in feature .
FYI: you need to use custom kernel e.g SueMax-kernel it has tons of Advanced customizations .
fla
kaizer hanz said:
no I mean, is status bar with 3minitbattery like icon signal, wifi and battery with dot/circle like iOS..
flashing zip maybe.. ?
Click to expand...
Click to collapse
flash systemui this
sksarfaraz said:
flash systemui this
Click to expand...
Click to collapse
thanks work perfect.. :thumbup:
djmax81 said:
Selinux Changer will not work on Stock based kernel coz of knox enable build in feature .
FYI: you need to use custom kernel e.g SueMax-kernel it has tons of Advanced customizations .
Click to expand...
Click to collapse
I think my English language skills must get better. You've misunderstood something in the text? I have written that i found out that the normal kernel have no SE Linux support. After this I installed the kernel of Pekaka. Then I could easily switch to permissive. But that has not solved the problem. Or do you want to say that only SueMax kernel solve the problem because its better than pekaka kernel? Have you tried it out?
Voiceless Location said:
I think my English language skills must get better. You've misunderstood something in the text? I have written that i found out that the normal kernel have no SE Linux support. After this I installed the kernel of Pekaka. Then I could easily switch to permissive. But that has not solved the problem. Or do you want to say that only SueMax kernel solve the problem because its better than pekaka kernel? Have you tried it out?
Click to expand...
Click to collapse
Before replying such a long message and try to 'read first'..!!! My Friend and there is absolutely nothing wrong with my or your English .
Lol And im the developer of suemax kernel but nothing personal. I was just trying to help you with some basic Knowledge .
Edited:
I replied to your this part : "I have with the SE Linux mode changer tries to switch to permissive, but it was not working."
My answer : "Selinux Changer will not work on Stock based kernel coz of knox enable built in feature. "
Never mind.!!!
suemax is crappy kernel it drain my battery like hell super lag ..
Thank you
SM-N900 cihazımdan Tapatalk kullanılarak gönderildi
Abandoned War Place said:
suemax is crappy kernel it drain my battery like hell super lag ..
Click to expand...
Click to collapse
Yo .! Look out your words 1st you kang My kernel BOF3 libs provided by dr.ketan and post it on pekaka thread. And now you say Suemax-kernel is "Crapy" @Abandoned War Place Honestly go first and learn How to Use an custom kernel before to Comment irrelevant and for sure for noob users like you i will only recommend pekaka kernel . As my kernel is Beyond Average User.
Read this : http://forum.xda-developers.com/showthread.php?p=62079397
djmax81 said:
Yo .! Look out your words 1st you kang My kernel BOF3 libs provided by dr.ketan and post it on pekaka thread. And now you say Suemax-kernel is "Crapy" @Abandoned War Place Honestly go first and learn How to Use an custom kernel before to Comment irrelevant and for sure for noob users like you i will only recommend pekaka kernel . As my kernel is Beyond Average User.
Read this : http://forum.xda-developers.com/showthread.php?p=62079397
Click to expand...
Click to collapse
What you say?? Im on suemax v2.2 and i love this kernel smoot and no lag.. and i get screen on 7hour and 18hour battery life.. keep build your kernel dev.. i love you kernel.. just wrong person say it laaag..
-Based on OFICIAL FW G925FXXU2COH2 lollipop 5.1.1
► Fully de-odexed
► Enabled GPU UI rendering
► Zipaligned with sdk R22.0.1
► Zipalign on boot
► Busybox
► Init.d scripts
► SQLlite3
► Supersu 2.46
► Knox removed
► Debloated
► Enabled usb debugging
► Disabled kernel debugging for better performance
► Disable sending data and logging
► Disabled bytecode verification to get more RAM and faster responses
► Faster scrolling
► Faster open camera app
► Increased camera picture quality
► Speed optimizations
- Mods :
► Advanced Power Menu
► Call record
► Disable camera sound
► Aursoundmod ( Increase sound and headphone volume- new mixer_patch.xml from n5)
► ViPER4Android FX.v2340 ( Official Thread )
► Disabled Scrolling Cache
- Rom Download :
RomAur v1.2
RomAur Mods
RomAur h2 560dpi
-560dpi with camera and keyboard
Systemui mod
- 3minit battery
- Center clock
- Rounded corners
Bootloader:
cmh2
sbooth2
Modem:
modemh2
- Changelog
RomAur v1.2 -03/09
- Fixed bootlop
- Removed xposed framework
RomAur v1.1 -01/09
- Updated xposed framework
- Improved performance and battery life
- Fixed privatemode
- Fixed init.d support
- New csc
- And more i dont remember
RomAur v1.0 -25/08
- Initial release
- HOW TO INSTALL THIS ROM :
1 - Installed lollipop 5.1.1 bootloader and modem
2 - Installed TWRP RECOVERY
3 - Download your desired kernel for lollipop 5.1.1 fw
4 - Copy rom and kernel to sdcard
5 - Enter to recovery
6 - Make a full wipe if come from another rom
7 - Install rom
8 - Install kernel
9 - Reboot
10 - Enjoy
Click to expand...
Click to collapse
Credits :
wanam ( for xposed framework )
ViPER520 and zhuhang ( For ViPER4Android )
ArchiKitchen by JustArchi
Click to expand...
Click to collapse
NOTE
- I AM NOT RESPONSIBLE FOR ANY DAMAGES THAT MAY CAUSE YOUR DEVICE
- If you appreciate my work qualifies with 5 stars
- If you appreciate my work and dedication
Feel free to donate
XDA:DevDB Information
RomAur v1.0 for G925F, ROM for the Samsung Galaxy S6 Edge
Contributors
auras76
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: G925F LOLLIPOP 5.1.1
Version Information
Status: Stable
Created 2015-08-25
Last Updated 2015-08-25
Looking good , WELCOME auras76 !! We can ALWAYS use more power rom`s ...
Hello & Welcome auras76 nice to see you onboard
Thx auras76
Welcome.
The G925FXXU2COH2 fw included also the edge+ features?
tzitzos said:
Thx auras76
Welcome.
The G925FXXU2COH2 fw included also the edge+ features?
Click to expand...
Click to collapse
Yes
auras76 said:
Yes
Click to expand...
Click to collapse
thx m8
downloading and i will try it tonight when i turn home.
i have already COH2 bl and modem from yesterday.
Unikernel 6
tzitzos said:
thx m8
downloading and i will try it tonight when i turn home.
i have already COH2 bl and modem from yesterday.
Unikernel 6
Click to expand...
Click to collapse
Hi man can u post it for 925F please? :good:
Master @auras76 is possible 3 minit mod? Tysm :good:
emilio62 said:
Hi man can u post it for 925F please? :good:
Master @auras76 is possible 3 minit mod? Tysm :good:
Click to expand...
Click to collapse
I can make one.tomorow i am travelling until sunday.
you can use wanam xposed module until...
tzitzos said:
thx m8
downloading and i will try it tonight when i turn home.
i have already COH2 bl and modem from yesterday.
Unikernel 6
Click to expand...
Click to collapse
do you have a link to C0H2 BL and modern thanks
Flashed. Bootloop
emilio62 said:
Hi man can u post it for 925F please? :good:
Master @auras76 is possible 3 minit mod? Tysm :good:
Click to expand...
Click to collapse
abun880007 said:
do you have a link to C0H2 BL and modern thanks
Click to expand...
Click to collapse
here they are gyus
from my drive
BL --> https://drive.google.com/open?id=0ByUH-BbofXUDUHNBbGRYd09Rb28
Modem --> https://drive.google.com/open?id=0ByUH-BbofXUDOExVajZmS1g4dlk
nice welcome
iigrs said:
Flashed. Bootloop
Click to expand...
Click to collapse
On g925f its fully tested.
iigrs said:
Flashed. Bootloop
Click to expand...
Click to collapse
I get it with every rom. Just clear cache and dalvic.
COH2 BL & Modem !!!
tzitzos said:
thx m8
downloading and i will try it tonight when i turn home.
i have already COH2 bl and modem from yesterday.
Unikernel 6
Click to expand...
Click to collapse
I am unable to search COH2 BL & Modem . Kindly provide a link where you got it from. Thanks in advance!
muhtad said:
I am unable to search COH2 BL & Modem . Kindly provide a link where you got it from. Thanks in advance!
Click to expand...
Click to collapse
see post on the top of the page
iigrs said:
Flashed. Bootloop
Click to expand...
Click to collapse
no problem here.
rom is working.
will test it tomorrow.
auras76 xposed by wanam is already installed?
i cannot find it
tzitzos said:
auras76 xposed by wanam is already installed?
i cannot find it
Click to expand...
Click to collapse
Only install xposedinstaller apk
can't not log in my accout from play store it showing like problem with google server but i can log in in browser anyone?
SpaceX Kernel
For Samsung Galaxy Note 4
(Exynos 5433 & Android 5.1.1 Only)
SpaceX Kernel Features:
- Base Samsung Opensource N910C (COH4)
- Supports N910C/S/L/K
- Auto-Rooting
- Auto BusyBox
- SELinux set to permissive
- Init.d support
- Auto-Kill Knox/SecurityLogAgent
- Deep Sleep fix
- Wifi pass forget fix
- Disable Samsung Rooting Restriction Feature & TIMA
- Removed Some Unnecessary Samsung Security Stuff
- Bic as default TCP congestion control for best networking speed
- Optimized for stable
Download:
https://www.androidfilehost.com/?w=files&flid=38265
Flash Guide
- Via Recovery custom
Copy Kernel (.zip) file to devices
Boot into Recovery, flash Kernel
Reboot
Update SU binary If asked (normal update)
Click to expand...
Click to collapse
- Via Odin
Boot devices into Download mode
Flash Kernel via Odin 3.10.7 (Tick AP, Open kernel file, click Start button)
Reboot
Update SU binary If asked (normal update)
Click to expand...
Click to collapse
Changelog
28/09/2015 - Release: v0.2-Dev:
Disable Samsung Rooting Restriction Feature & TIMA
Removed Some Unnecessary Samsung Security Stuff
Bic as default TCP congestion control for best networking speed
Ramdisk: Add auto install SuperSU.apk to system & fix run init.d scripts
Optimized for stable
Click to expand...
Click to collapse
Donate to Me!!!
XDA:DevDB Information
SpaceX Kernel Exynos 5433 - Auto Root/Busybox Android 5.1.1, Kernel for the Samsung Galaxy Note 4
Contributors
Manh_IT
Source Code: https://github.com/ManhIT-CMB/SpaceX-Kernel-Exynos5433
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: 0.2
Beta Release Date: 2015-09-28
Created 2015-09-03
Last Updated 2015-09-28
During boot up it should show with red letters "kernel is not seenforcing" ,is that ?
pls add ram fix, it kills apss from ram as in s6
SUNUN said:
pls add ram fix, it kills apss from ram as in s6
Click to expand...
Click to collapse
Isn't that just simple build.prop tweak?
Toss3 said:
Isn't that just simple build.prop tweak?
Click to expand...
Click to collapse
I think yes i added it manualy from here
http://forum.xda-developers.com/showthread.php?t=3150862
SUNUN said:
I think yes i added it manualy from here
http://forum.xda-developers.com/showthread.php?t=3150862
Click to expand...
Click to collapse
Has it actually been proven to improve anything on the note 4? Personally I wouldn't include any build.prop tweaks you can add yourself.
This kernel is work perfectly.
Thank. dev.
Toss3 said:
Has it actually been proven to improve anything on the note 4? Personally I wouldn't include any build.prop tweaks you can add yourself.
Click to expand...
Click to collapse
Without this rom kills my apps from memory my watch faces and other apps. Now looks like all is ok as it been on 5.0.1
Working great with eRobot rom. Thank you dev. Keep it up !
Working great with stock rom
br
Thanks bro great job we are love you
SM-N910C cihazımdan gönderildi
Working fab thanks Devs
great job man
thanks a lot
Will this work on Wanam Lite ROM?
any Odin file Sir?
Q: Can I flash TWRP via odin even though my device isn't rooted yet? thanks
I tried this Kernel with Glamour ROM version 4. I can't even use my phone since I got NFC force closed message 3-4 times and then my Note 4 start rebooting itself. and the loop begins.
Don't know anyone try this Kernel with Glamour ROM?
This is actually weird!
I am on completely stock rom (Bootloader, kernel, recovery, rom, etc...) so I can't flash the kernel via recovery and there's no odin file yet!
How to do?
Life Engineer said:
This is actually weird!
I am on completely stock rom (Bootloader, kernel, recovery, rom, etc...) so I can't flash the kernel via recovery and there's no odin file yet!
How to do?
Click to expand...
Click to collapse
You can install custom recovery (TWRP) even if you are not rooted. Just flash the .tar file via ODIN and you're good to go.
ton_pkt said:
I tried this Kernel with Glamour ROM version 4. I can't even use my phone since I got NFC force closed message 3-4 times and then my Note 4 start rebooting itself. and the loop begins.
Don't know anyone try this Kernel with Glamour ROM?
Click to expand...
Click to collapse
Glamour is 5.0.1(or 2), this is for 5.1.1.
princeken09 said:
Glamour is 5.0.1(or 2), this is for 5.1.1.
Click to expand...
Click to collapse
Ok, so that's the case. Just try with some hopes that it might compat.
Thanks for your comments.
TRUONGTAN|STOCK UX ROM|DPH6 FOR NOTE 4 EXYNOS N910S-L-K/N916S-L-K
Stock android base 6.0.1 DPH6
NgheAn : 15/10/2016
Rom Version: V4.0
SPen Feature Note 7
http://forum.xda-developers.com/note-4/themes-apps/spen-note-7-feature-note-4-stock-t3489916
FAST AND SMOOTH
**********************************************************************************
A> ROM FEATURE
1. Stock base lastest DPH6
2. Deodexed and no root
3. Fix sms no limit
4. Call and contact Note 5
- My file Note 7
- Gallery Note 7
- Music Note7
- Voice Note N7
- Calculator Note 7
- Email Note 7
- Fingersprint full work
- Csc XXV
-Code test full worK
- Update app N7 on Galaxy Apps
- Add font 140
- Add theme store
- Add Launcher change mode
- Add Edge screen
.... and more
B> HOW TO INSTALL
1. Stock or port rom 6.0.1 Using
2. Wipe data/ cache/ system/ dalvik
3. Flash rom
4. Flash kernel ( skip if you not want)
5. Flash SU
6. Flash fix call aroma if bug
7. Flash fix launcher DPI
https://drive.google.com/file/d/0B2n7QXy7-_-QSzVTTFNOZlMxbnc/view?usp=sharing
*************************************************************************************
C> CHANGELOG V2
- Fix private mode
- Fix can't open video on Gallery
- Add samsung Note 5 keyboard
- Fix check *#0*#
- Fix photostudio
- Fix white statusbar on call
- Fix overley screen
- Fix drive mode
- Fix festival effect
- Add .apk tab on my file
- Add calcator
- Fix Edge screen bug Multiwindown
- Fix CMH f.c
... and more
V3
- Mod lockscreen Note 7 ( call button and camera show)
- Mod statusbar
- Fix Shealth
- Show toolbox and smart manager on settings
- Power Menu theme Note 7
- Add flash light Settings
- Fix seclect font
- Fix keyboard
- Fix grand when open power saving mode
- Clearn notinfication ower saving mode
V4 :
- Full toggle note 5 icon
- Fix camera dpi
- full notification
- Add 5 away reboot
- Change 3G to H+
- Add clock Note 7
- Change mod icon launcher
... updating
D>SCREENSHOT
Click here
E>DOWNLOAD:
1. ROM
V1.0(15/10/2016)
Google Driver:
V1.link1
Gg2:
V1.link2
V2.0 (16/10/2016)
V2.16.10
V3 (22.10.16)
https://drive.google.com/open?id=0BzJp3NINLL8HbFNRckVGODdDVlE
V4_Final (25/10/16)
https://drive.google.com/file/d/0B2n7QXy7-_-QX1IzbUgtb01sTDA/view?usp=sharingusp=sharing
2. PATCH Fix call
Aroma patch fix call
4. SUPER SU
Root
5. Keyboard samsung Note 5
Keyboard
6. Fix sms report
Copy to system/framework
fix patch
If you like my hard work, you can donation via my Paypal
XDA:DevDB Information
TRUONGTAN|STOCK UX ROM|DPH6 FOR NOTE 4 EXYNOS N910S-L-K/N916S-L-K_V4.0, ROM for the Samsung Galaxy Note 4
Contributors
tanthuychivietnam
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Stable
Current Stable Version: 2.0
Created 2016-10-16
Last Updated 2016-10-29
Welcome aboard.....
Many many Thanks for this... :thumbup:
Does this rom work on n910u? thanks for your work anyway
Another link please..mega if possible.tried downloading v2 on google drive but its more thanan hour now and still 0%.. Thanks anyways..
Thanks for the effort..
Any bug? What about video call?
Screenshots are not working
thain said:
Does this rom work on n910u? thanks for your work anyway
Click to expand...
Click to collapse
if it user exynot chipset
screenshot
valinor61 said:
Screenshots are not working
Click to expand...
Click to collapse
Updated
tanthuychivietnam said:
Updated
Click to expand...
Click to collapse
still not working
pedodroid said:
still not working
Click to expand...
Click to collapse
updated link
n910C dùng dc ko bạn ?
camxucgame said:
n910C dùng dc ko bạn ?
Click to expand...
Click to collapse
yes, you can try flash call if not sig
I have n910h. Can i flash?
passionicon said:
I have n910h. Can i flash?
Click to expand...
Click to collapse
I flashed on n910h but unknow baseband, tried to restored radio or flashed baseband via odin still unknown
tanthuychivietnam said:
3. KERNEL:
.... inbox to my facebookTruongtan86
Click to expand...
Click to collapse
May i ask why we need to message you for kernel ? What should be the message ? Why not just give it here like the rom itself ? Can this rom use kernel on another thread ?
Thanks.
Thank you for the new rom. I tried it and seems that have many bugs.
tanthuychivietnam said:
yes, you can try flash call if not sig
Click to expand...
Click to collapse
thanks
just_klide said:
May i ask why we need to message you for kernel ? What should be the message ? Why not just give it here like the rom itself ? Can this rom use kernel on another thread ?
Thanks.
Click to expand...
Click to collapse
kernel can't share pulic, it have not permission
edsoedso said:
Thank you for the new rom. I tried it and seems that have many bugs.
Click to expand...
Click to collapse
no, if you user korea version