Flashed stock Rom. Now my operator is not available. SM-G920I - Galaxy S6 Q&A, Help & Troubleshooting

I had a SM-G920I with a Claro carrier Rom. The phone was unlocked, I used my Entel carrier sim normally. I decided to get rid of the boot animation and bloatware from Claro, so I flashed the stock Rom, it was succesful, but my selected network (Entel) was not not available. Please help.

Related

Perma-lock on g3 AT&T after flashing stock firmware.

My g3 was working fine as i bought it from a shop. But later it started going into a bootloop. I flashed the stock firmware but still it goes into bootloop when i insert a sim. and the network is also permanently locked when i run it without a sim. what should i do? i am using it with a non at&t sim.

SM J700F - needs custom roms that can used sim card from any network provider

im noob here and i found custom roms (but not for sm j700f) that have sim unlock to any network provider.
i already use one custom roms for sm j700f but its still locked to network
can you help me find one?
edit:
my device is SM-J700F with android version 5.1.1
To my knowledge Custom roms cannot sim unlock your phone. Your phone must be sim unlocked while on stock firmware and only then you'll be able to use any sim from any carrier while on any custom rom.

[Problem] Lost VoLTE en VoWiFi after flashing

Hi,
Unfortunately, it happens to be the case that phones lose wifi/4G calling feature after flashing a ROM which does not have the same CSC. In my case, stock Vodafone Netherlands ROM was preinstalled (by Vodafone or Samsung (idk)).
After flashing the UK BTU nougat ROM, I lost wifi/4G calling feature.
I've since tried to get the feature back.
I thought I downloaded the correct firmware from Sammobile: Netherlands Vodafone ROM.
However, after having flashed the ROM successfully, the phone gives me the message "Wilkommen", which in German!
It should be Dutch! I can change language, but that doesn't bring back the feature
Do you have any idea where I can find the right ROM?
Thanks in advance!
A copy of your "CSC" will do as well!

G955FD won't connect to Cricket Wireless in US

I just unboxed my G955FD and put my cricket SIM in and have no response from the network other than pushing an APN and my phone number. I tried manually selecting carrier networks and it listed 5 different "cricket" to attempt to connect to. At one point it showed signal bars in the status area, but no network connectivity. When I automatically connect to the network it responds saying I am registered but no signal bars in status and no activity. I appreciate the help.
Can anyone offer some tips before I call it a lost cause? The phone is out of its return period and probably broken since it will now receive a cricket badge and bars and LTE service but will not make calls or go online
Hey, are you on stock ROM. My 955F works just fine on Cricket, though compared to my daughters AT&T setup, her data is much faster. just discovered this today, and tomorrow will visit Cricket and AT&T to find out why...
Jan 9, 2108 update. I discovered Cricket is limited to about 5-6 Mps. I'm now on AT&T, for a few dollars more for two lines, and can get up to about 40-60 Mps in town.
What region CSC are you using?
---------- Post added at 07:59 AM ---------- Previous post was at 07:35 AM ----------
Here are my apn settings
Name: any but I input Internet or Cricket, I think it will work with whatever you like.
APN: ndo
MMSC: http://mmsc.aiowireless.net
MMSC proxy: proxy.aiowireless.net
multimedia message port: 80
mcc: 310
mnc: 150
apn type: default,mms,fota,hipri,supl
I know when I've setup APs on other phones there have been times that I will first do a 'reset' of my network settings on the phone, then reboot. Sometimes that will help. After that I will enter new APN settings and reboot.
On this 955F, with a viable CSC my phone just finds Cricket and works. With a bad CSC, it may list/show the cricket or AT&T networks, and will not register, no matter what I do, and for how long.
For example, my phone initially had a stock F ROM and a Panama region for the CSC. It worked with Cricket straight away. I changed the CSC to XAA using AT&T, and would find the towers, but would absolutely not register/work.
I ended up installing CarHDROM - a Note 8 OS ported for the 8+, and It took me a bit to find a CSC package that was meant for the ROM (Note 8) I was using, meaning I had to use a Note 8 CSC, even though my phone was an 8+ 955. Once that installed, Cricket started right away.
The CSC that came with CarHDROM I don't think worked straight out, but I can't recall for sure. I did end up using a XAA CSC, for the Note 8, non-AT&Tand that solved my connection issue after I had installed the CarHDROM.
CSC and phone wise, the ROM takes precedent, and the CSC must match the ROM (model). Seems that way to me, anyway.
Hope his helps.
There is another post about a FD phone that won't connect up, as well.
https://forum.xda-developers.com/galaxy-s8+/help/original-firmware-t3725472
I am on stock ROM. I guess I will root today and change CSC and hopefully that fixes whatever issue is going on. I have seen the cricket badge and LTE bars recently but no registration on network. If not, the eBay seller said they will take the phone back I'd it's indeed broken.
Ok so far no luck changing the CSC on stock ROM. I am going to try a couple different ROM and CSC combos tonight. Once again I am showing bars and cricket badge but not connecting data or voice on the phone, after root, and changing CSCs. I feel like Im so close and passed up my last day to return to eBay seller so I hope it truly is software and not hardware related. Im thinking of going by AT&T to act like a potential customer and see if its cricket messing up. Any other suggestions to try before I go crazy and use this phone for target practice?
Is it possible this is a region lock issue? My phone is a Tawain version and it was brand new out of the box. There is no sticker on it mentioning region lock. Does anyone have any insight into region locking for outside EU devices?
ChikhaiBardo said:
Is it possible this is a region lock issue? My phone is a Tawain version and it was brand new out of the box. There is no sticker on it mentioning region lock. Does anyone have any insight into region locking for outside EU devices?
Click to expand...
Click to collapse
Good question. I have a 930S Chinese region and it pulled in ATT/Cricket/TMobile just fine. I did have problems when I flashed a custom ROM, and flashed the CSC that came with the ROM. Later I flashed back the OEM CSC for the region (China) and it worked perfectly, again.
If you do flash a custom ROM, make sure you get a CSC package that is meant for that ROM (model). Not the exact model of your original phone. If you can find an XAA CSC that is meant for the new ROM, should be perfect.
JeffDC said:
Good question. I have a 930S Chinese region and it pulled in ATT/Cricket/TMobile just fine. I did have problems when I flashed a custom ROM, and flashed the CSC that came with the ROM. Later I flashed back the OEM CSC for the region (China) and it worked perfectly, again.
If you do flash a custom ROM, make sure you get a CSC package that is meant for that ROM (model). Not the exact model of your original phone. If you can find an XAA CSC that is meant for the new ROM, should be perfect.
Click to expand...
Click to collapse
Ok I have been changing CSC through TWRP with the CSCSelection Utility. Is that what you are referring to with flashing CSC? Is there a more effective way to do this through Odin? I think tomorrow morning I am going to flash back to stock firmware and start over. Am I able to flash any stock firmware for the SM-G955FD through Odin or do I need the original firmware for my region, which is (BRI) I believe I remembered reading I can flash everything for that model, but not any North American firmware meant for the SM-g955U
ChikhaiBardo said:
Ok I have been changing CSC through TWRP with the CSCSelection Utility. Is that what you are referring to with flashing CSC?
Yes
Is there a more effective way to do this through Odin? I think tomorrow morning I am going to flash back to stock firmware and start over. Am I able to flash any stock firmware for the SM-G955FD through Odin or do I need the original firmware for my region, which is (BRI) I believe I remembered reading I can flash everything for that model, but not any North American firmware meant for the SM-g955U
Click to expand...
Click to collapse
Just flash the CSC that comes 'stock'/with the rest of the full, stock firmware set, Odin will work. Have the SIM in the phone before you reboot, as for me it seems to help.
I haven't found a difference, for me yet, just flashing the exact CSC through Odin or TWRP. As I'm now on a custom ROM, I'm usually flashing via TWRP with a CSC that is supplied by an Aroma setup. Aroma is very handy.
Yes, flash your full stock via Odin. If you have TWRP you will lose it. You can re-flash TWRP from Odin. I typically flash TWRP all by itself, but I don't think that is really necessary. Maybe someone will come along and let us know.
As an aside I always keep a copy of zips/installs of TWRP, re-verity and SU on my SD card.
So after the stock full flash, I reboot into download mode and Odin flash TWRP, and follow that by a direct 3 key reboot into recovery, and TWRP will load. If you are going to root then flash re-verity, then SU/Magisk. You could then flash your CSC, but with the issues you've been having, I'd then boot to system, do the initial setup of the phone, and then boot back to recovery/TWRP, backup the phone.
Then TWRP flash the CSC Aroma package, making sure you have the SIM in the phone and reboot to system. I've been using XAA as my CSC with my custom ROM, within that is AT&T, T-Mobile, etc for US phones. I select the main XAA CSC from Aroma. Next I select the unbranded XAA as my more specific/local package, instead of AT&T, for example.
My 955F, stock worked just fine on it's 'stock' CSC (China region). I only had to change the CSC when I flashed a custom ROM, and that ROM did not have the ROM's (model) of XAA, so I had to find a CSC, which had XAA, that 'matched' the ROM I had flashed. I had flashed a Note 8 ROM, CarHDROM,v8 initially. Again, that ROM was largely meant for Europe and Exynos phones, so I had to be pointed to a Note 8 CSC that was compatible with the Note 8 custom ROM.
Yes, Odin is where you would flash stock firmware/stock CSC (not in an Aroma package) for your SM-G955FD. It is my understanding that all non-US phones, eg the G955's, are mechanically the same, so flashing 'any' Exynos ROM, G955FD ROM should work via Odin. You can also flash CSC packages via Odin as well, but there is no Aroma process, to my knowledge/experience. So have the specific and correct CSC to flash via Odin, if you go that route. It sounds like you are aware your phone is Exynos? A non-US phone?
I specifically bought my G955 (8+) as non-US so it could take root smoothly/easily, and work great world wide, including working great here in the US. Sometimes the U.S. does not seem a part of the world.
As I've been messing about with S7's/8s, there have been times that the phone did not grab onto AT&T, for example, and i would then 'reset' the network and reboot, with the SIM in the phone, then do a search for phone networks/services. That usually solved it, but when it did not, and I know I have the right CSC, I would then input/create a new APN, with AT&T, Cricket, Sprint, or what-ever service I needed, then reboot.
The only times I've not gotten the phone/s to grab the networks after that is when I've had the incorrect CSC.
Again, on my stock what-ever country G955F, stock G930S, etc, all Exynos, with the same stock (non-US) CSC that come in the firmware package, the phones have grabbed AT&T/T-Mobile just fine. If it would not, I would have reset the network, rebooted and entered the APN, and then rebooted (with the SIM in the phone). Done a network search after that, if necessary.
Hope this helps.
So today I stopped by TMOBILE and the store clerk popped a SIM card in and it fired up 4G LTE immediately and made calls. I then decided to stop by AT&T and it showed bars but refused to register or do anything even with the APN settings being pushed through from AT&T and Cricket. I am finally happy to realize that my phone is not defective (which I had feared before) and that it must be this service area and the bands on the G955FD. I have wanted to switch to TMOBILE for awhile now anyway so this is my chance to have an excuse to do it. Any input on why it won't access AT&T through an AT&T or Cricket SIM? I'm curious now more than anything. It must be missing a band that this area uses correct? The phone is clearly unlocked and functioning correctly.
What local CSC r u using?
Did you have AT&T check the APN?
T-Mobile and AT&T work on S8+ just fine, but need appropriate APNs.
Head back to the AT&T, if you want AT&T, and see if they will reset and or reinstall AT&T CSC/OS on your phone. XAA/ATT will have the AT&T boot logo. XAA/XAA (generic US use, ATT/T-Mobile compatible) will not.
One ringy dingy, two ringy dingy's...

Flashing an AT&T firmware on US Cellular device

My friend got a used SM-G920R4, has AT&T, and wants root. I want to get the AT&T stock firmware to put on it, then root it. The sim works once AT&T settings get added to the network list, however mobile data doesn't work. He is running Android 6.0.0 and has an unlocked bootloader.

Categories

Resources