Hi,
Unfortunately, it happens to be the case that phones lose wifi/4G calling feature after flashing a ROM which does not have the same CSC. In my case, stock Vodafone Netherlands ROM was preinstalled (by Vodafone or Samsung (idk)).
After flashing the UK BTU nougat ROM, I lost wifi/4G calling feature.
I've since tried to get the feature back.
I thought I downloaded the correct firmware from Sammobile: Netherlands Vodafone ROM.
However, after having flashed the ROM successfully, the phone gives me the message "Wilkommen", which in German!
It should be Dutch! I can change language, but that doesn't bring back the feature
Do you have any idea where I can find the right ROM?
Thanks in advance!
A copy of your "CSC" will do as well!
Related
Hello There,
My phone is an L55U(China Unicom variant of D6633). I have been using D6633 non-rooted stock rom for some time. and received lolipop OTA. It was okay but somehow it had problems like not able to read pictures in sdcard etc.
Recently I switched to pre-rooted stock ROM following the procedures shown in
http://forum.xda-developers.com/z3/general/stock-firmware-23-1-1-e-0-1-customized-t3084544
When using this rom, the google apps constantly crash, so I switched to another stock rom shown in
http://forum.xda-developers.com/z3/general/d6603-5-0-2-flashable-stock-23-1-0-690-t3056361
(D6633_23.1.1.E.0.1_HK_SuperSU_XZDR2.8.20 thanx to @alvinlim28)
But this time an even more irratating problem occurs. The phone mobile data is disabled no matter how I try. I tried to swap the simcards and it seems only the data roaming can be used.(my two simcards are local Ortel D and roaming ChinaMobile, as I now live in Germany).
Also tried restarting, limiting the simcard in GSM only mode but neither worked. Other functions are fine so far. I am now dowloading the pre-rooted RU ROM but it may take a while. Later I may test with that one.
plz help. thx
Maybe you're using a Rom from another country/carrier. think HK means hong kong in this case. You need to find a german one.
lol1rfs said:
Maybe you're using a Rom from another country/carrier. think HK means hong kong in this case. You need to find a german one.
Click to expand...
Click to collapse
Problems solved after I did these procedures all over again and switched to the customized generic stock lolipop. It turned out that the stock HK ROM somehow couldn't properly retrieve the mobile data network settings.
Interesting.... Have you manually added the APN data for your mobile carrier?
Hi all,
I'm actually using Arter's Back-to-Note with Arter kernel.
The device is an Italian WIND branded one over I flashed first the ITV firmware to get rid of bloatware, then the H3G one for better compatibility with my carrier network and in the end some custom roms.
Now, I'd like to update to Marshmallow but I don't know which version to flash through Odin.
At the moment, I'm thinking about the Italian Vodafone one, the French unbranded one or the Cyprus one.
The main doubts are:
- If I need a particular PIT file to flash these firmware;
-Which is the best firmware to flash?;
-Is possible to downgrade to Lollipop then?
Hi, i'm Italian also, and i have your same phone branded Wind.
- i don't think you need a particular PIT file, because if it was necessarily, Odin had to ask for it when you passed from the branded rom to the ITV one. (i did the same, without the PIT file, and everything went fine).
- if you flash the french one, the SpO2 measuration in SHealth will doesn't work, if you don't use it, you can flash this one or the Vodafone one (i chose these ones because are the most nearly cities)
- i had read that you can downgrade, but i am not sure, i haven't tried it yet. i'm updating to Marshmallow, only because i've tried all but my signal doesn't work, i don't really like the Marshmallow TouchWiz, if the signal it's not gonna start working, i will downgrade
On my G930f on BTU WiFi calling has gone for Vodafone UK. Yet the odd thing is if I put an EE SIM in it appears. Why would this be and is there a workaround?
Same for me. Would be really good if there is a workaround. Specially since i am currently in Europe.
slugger09 said:
On my G930f on BTU WiFi calling has gone for Vodafone UK. Yet the odd thing is if I put an EE SIM in it appears. Why would this be and is there a workaround?
Click to expand...
Click to collapse
For me it was working.
I flashed the Android 7 ROM via ODIN but used the CSC from my country and provider (use the CSC_XX instead of HOME_CSC_XX to wipe the device and set the CSC back), instead of the one containted in the rom.
You can try to flash the CSC from a MM Vodafone UK Rom. Make sure to pick the CSC_VOD_version instead of HOME_CSC_VOD as only the first one will wipe the device and set the CSC back to the default one from that file: Vodafone UK.
Try to extract the CSC from here:
http://www.sammobile.com/firmwares/download/104056/G930FXXS1BPJ1_G930FVFG1BPH2_VOD/
Hello peeps, i have installed the latest firmware for the SM-G930F from Belgium (G930FXXS3ERL4_G930FVFG3ERJF_PRO) but somehow the carrier apps from vodafone get installed when booting into the system even though the Proximus app should be installed... I have tried to reinstall it multiple time and still have the same outcome? had this problem with my S6 Edge in the past too but i fixed it somehow (I didn't fix it but it fixed itself tho XD)
VoidedKN0X said:
Hello peeps, i have installed the latest firmware for the SM-G930F from Belgium (G930FXXS3ERL4_G930FVFG3ERJF_PRO) but somehow the carrier apps from vodafone get installed when booting into the system even though the Proximus app should be installed... I have tried to reinstall it multiple time and still have the same outcome? had this problem with my S6 Edge in the past too but i fixed it somehow (I didn't fix it but it fixed itself tho XD)
Click to expand...
Click to collapse
There is only one reason this happens, the firmware is not an unbranded international version.
Complete waste of time messing about with Belgian, French,German version etc just Download the BTU firmware from sammobile or direct from Samsung. It's says United Kingdom but it's basically western Europe unbranded.
cooltt said:
There is only one reason this happens, the firmware is not an unbranded international version.
Complete waste of time messing about with Belgian, French,German version etc just Download the BTU firmware from sammobile or direct from Samsung. It's says United Kingdom but it's basically western Europe unbranded.
Click to expand...
Click to collapse
So if i download and install the BTU version what will be different rom the belgian software? Like i remember with my s4 i used to install BTU firmware all the time because there wasn't one for belgium, but didn't notice anything different with my sim card... so i hope this will be the same that i still have the functionallity like i had before i flashed custom roms
VoidedKN0X said:
So if i download and install the BTU version what will be different rom the belgian software? Like i remember with my s4 i used to install BTU firmware all the time because there wasn't one for belgium, but didn't notice anything different with my sim card... so i hope this will be the same that i still have the functionallity like i had before i flashed custom roms
Click to expand...
Click to collapse
The BTU stock holds all the csc codes, base bands, network functions for all of the European region which means once it connects to the network in your country, it automatically detects which system files to use so you "don't notice anything different" than if you had installed country specific like Belgian.
There is always one stock which hold everything for a region, in Europe its the UK unbranded, generic, international, BTU version. It works everywhere in Europe.
okay so i've installed the btu version and it worked just fine, except it was a little slower and idk why. but when i tried to use mobile networks it wouldn't work so i checked my apn settings and my provider wasn't in there so i had to add it manually wich for me turned into an even slower experience on my phone... I really don't know what i did wrong or what happend, so is it possible to get a detailed instruction to flash the stock oreo rom? and also a how to for rooting stock oreo with magisk? because my guess would be that something went wrong when rooting
VoidedKN0X said:
okay so i've installed the btu version and it worked just fine, except it was a little slower and idk why. but when i tried to use mobile networks it wouldn't work so i checked my apn settings and my provider wasn't in there so i had to add it manually wich for me turned into an even slower experience on my phone... I really don't know what i did wrong or what happend, so is it possible to get a detailed instruction to flash the stock oreo rom? and also a how to for rooting stock oreo with magisk? because my guess would be that something went wrong when rooting
Click to expand...
Click to collapse
Hello well unfortunately Belgium isn't important enough country to have your own unbranded stock firmware.
APN settings should install automatically when you connect to mobile network in your country.
There is a specific guide to follow to root S7 on Oreo, please google and follow it exactly.
Also BTU is a stock Oreo ROM.
Hi , my XZP came with an unlocked bootloader, and the firmware is the one for my country, but is a lot bloated, and also I don't like the boot animation, and shut down one .
My question here is this , my firmware supports VoLTE , if I flash another firmware will i lose that option?? If yes, then what archive do I need to avoid in order to flash my device without losing the VoLTE option.
Thanks .
Anybody??
Also if I have my bootloader unlocked, how do i root the phone on Android pie ?? My firmware is
47.2.A.10.107
Well i flashed a german customized firmware,and excluded modem.sin from the flash, everything went smooth and i have the VoLTE settings.
I think that i need to call to my operator in order to have VoLTE calls because when i make one, it shows me HSDPA.
Also when i excluded the modem from the flashing, i was expecting yo have the same modem, but no, just look at the screenshots.
And finally can please anyone point me in the right direction in how to flash this device with this firmware : G8141_Customized DE_1308-5289_47.2.A.10.107_R6C
Thanks.