Recently i flashed alliance rom version 1 on my 5.1.1 G920i samsung galaxy s6 because i was stupid and tired, anyway... ever since then i've been stuck in a boot loop but when i went into recovery mode via TWRP i couldn't restore any backups or anything and nothing worked. When i plugged my phone into my pc it wasn't registered even after installing drivers, odin or command prompt couldn't detect it either. So now i have an S6 that has been factory reset on a ROM that doesn't work and my phone won't register on pc at all. Tried on 2 different pc's.
Enter în download mode and restore your phone using smartswitch or odin
http://forum.xda-developers.com/galaxy-s6/help/to-softbricked-phone-t3379387 try this
Diaze said:
Enter în download mode and restore your phone using smartswitch or odin
Click to expand...
Click to collapse
my phone won't connect to pc though but thank you anyway
Install this firmware it helped for me http://forum.xda-developers.com/galaxy-s6/help/to-softbricked-phone-t3379387
Related
Hi I was trying to upgrade the Android Version on a Galaxy S2.
I installed Clockwork Mod Recovery and was able to boot into it but couldn't access the SD for installing image.
I booted into the downloading screen ( vol down and power on boot ) and installed an image then bootloader via Odin.
Now when I boot there is the standard Samasung Galaxy S2 logo and I can't access the downloading screen or clockwork mod and it just goes to the animated S logo with usb not recognized appearing on the connected Windows box.
Is there anyway to restore from this point?
Are you able to access the phone through ADB?
If yes, run: adb reboot download, and this should put you in downlaod mode so you can odin a new firmware.
If no adb access, Does odin recognize the phone?
If yes, you should be able to odin a new firmware.
Make sure when you flash the new firmware you are using the correct rom for your device. ie: from your post you have a GS2 I9000 which is not the same as the GS2 SGH-T989.
you would use roms from this forum: http://forum.xda-developers.com/forumdisplay.php?f=665
If you are unable to flash a rom you can always purchase a download mode jig to get you into download mode if you have not Hard Bricked the phone. If you have Hard Bricked your phone there are a couple of sites that do Jtag repair to unbrick your phone.
Good Luck
No reponse from Odin or ADB
I have purchased a download mode jig hopefully it will work.
Thanks for your advice
Hello,
I need your help because I'm in real trouble.
Before I hard bricked my phone I was on the latest version of the Tyrannus Rom.
I wanted to install Xposed but I picked the wrong version.
I flashed it but I got a boot loop.
So i've downloaded the latest stock Rom from Sammobile and tried to flash it with Odin.
Odin got an error and f*cked up my download mode.
Now I'm stuck with a bricked phone with no download mode.
I only got this message on the download mode : "Use the emergency recovery function in the smart switch pc software."
Wich I did.
It downloaded the software and tried to install it but got an error at the begining of the instalation after the download.
After that I restarted it and the download mode was working, so I've tried again to install the stock firmware and didn't worked.
This was the error it gived me : "cm sw rev check fail device 4 binary 3"
Please help me.
"Use the emergency recovery function in the smart switch pc software." With This message you can stil flash rom with odin emergency...= download mod its the same or flash latest twrp recovery go inside recovery connect your phone copy past custom rom flash it ...its not bricked if it says use emergency message its just saying flash me with odin easy
tazaga said:
"Use the emergency recovery function in the smart switch pc software." With This message you can stil flash rom with odin emergency...= download mod its the same or flash latest twrp recovery go inside recovery connect your phone copy past custom rom flash it ...its not bricked if it says use emergency message its just saying flash me with odin easy
Click to expand...
Click to collapse
Out of curiosity and sorry for jumping on your post but I've have not had any response on my thread and my device has been soft bricked for 4 days now.
How can i go about flashing my device if my PC wont recognise my phone. I've tried everything.
What is the situation you have is there any message or can you turn it on or can you recovery mod or download mod ?
Force it into download mode and do it again, worked for me
tazaga said:
What is the situation you have is there any message or can you turn it on or can you recovery mod or download mod ?
Click to expand...
Click to collapse
Hi so I get the message saying " an error occurred while updating the device software. Use the emergency recovery function in the smart switch PC software" however i cannot get my PC to recognise my device. I have tried 6 different cables, 3 different laptops used 3 different ODIN software versions, removed kies removed and installed drivers, been into my laptop BIOS to disable 3.0 usb drivers also done this through the power saving options. Only thing I have not tried is using a 32bit computer. Surely there is a away to get my laptop to recognise this phone as i used this laptop to screw it up in the first place.
I can get it into download mode, but i cannot get it into recovery mode.
The PC shows a message saying "USB device not rocognised. The last USB device you connected to this computer malfunctioned and Windows does not recognise it."
Strepherd said:
Hello,
I need your help because I'm in real trouble.
Before I hard bricked my phone I was on the latest version of the Tyrannus Rom.
I wanted to install Xposed but I picked the wrong version.
I flashed it but I got a boot loop.
So i've downloaded the latest stock Rom from Sammobile and tried to flash it with Odin.
Odin got an error and f*cked up my download mode.
Now I'm stuck with a bricked phone with no download mode.
I only got this message on the download mode : "Use the emergency recovery function in the smart switch pc software."
Wich I did.
It downloaded the software and tried to install it but got an error at the begining of the instalation after the download.
After that I restarted it and the download mode was working, so I've tried again to install the stock firmware and didn't worked.
This was the error it gived me : "cm sw rev check fail device 4 binary 3"
Please help me.
Click to expand...
Click to collapse
i had similar problem with that message as in thread this thread
try flashing with hidden.img, worked for me but after that i got other problem but at least phone works.
HowJesNo said:
i had similar problem with that message as in thread this thread
try flashing with hidden.img, worked for me but after that i got other problem but at least phone works.
Click to expand...
Click to collapse
Yeah I would just flash it, my issue is it will not connect to the PC. For me to flash it or transfer any image to then internal memory i need to have the laptop recognise my device connected. If i had a removable SD card i could just put TWRP on this and go into recovery but the s6 doesnt have this feature either.
I have no idea what to do. I was hoping someone would have a resolution that i have not yet tried and could get my PC to recognise the phone connected.
does odin recognize phone is connected?
HowJesNo said:
does odin recognize phone is connected?
Click to expand...
Click to collapse
He said no. Please read to understand if you really mean to help someone.
Twydell said:
Yeah I would just flash it, my issue is it will not connect to the PC. For me to flash it or transfer any image to then internal memory i need to have the laptop recognise my device connected. If i had a removable SD card i could just put TWRP on this and go into recovery but the s6 doesnt have this feature either.
I have no idea what to do. I was hoping someone would have a resolution that i have not yet tried and could get my PC to recognise the phone connected.
Click to expand...
Click to collapse
Have you tried usb otg?
Try to delete USB drivers and reboot install them again
That Binary Check problem mostly means you're trying to downgrade the firmware. Look for the latest version from fw.updato.com and flash it.
Strepherd said:
Hello,
I need your help because I'm in real trouble.
Before I hard bricked my phone I was on the latest version of the Tyrannus Rom.
I wanted to install Xposed but I picked the wrong version.
I flashed it but I got a boot loop.
So i've downloaded the latest stock Rom from Sammobile and tried to flash it with Odin.
Odin got an error and f*cked up my download mode.
Now I'm stuck with a bricked phone with no download mode.
I only got this message on the download mode : "Use the emergency recovery function in the smart switch pc software."
Wich I did.
It downloaded the software and tried to install it but got an error at the begining of the instalation after the download.
After that I restarted it and the download mode was working, so I've tried again to install the stock firmware and didn't worked.
This was the error it gived me : "cm sw rev check fail device 4 binary 3"
Please help me.
Click to expand...
Click to collapse
Haha same thing with me.. its not hard bricked. Flash twrp with odin while that message opens up then a custon rom
hello i have a samsung s6 rooted and a TWRP installed i just entered to twrp an wiped system partition now the s6 cant boot i tried to flash it via odin but odin cant detect it in download mode i installed samsung usb drivers but the same problem i tried to boot via external storage in recovery mode but TWRP don't see the usb otg. is there a chance to flash it. i did all the solution like adb skipsoft toolkit samsung kies smart switch without result. help me please
medson said:
hello i have a samsung s6 rooted and a TWRP installed i just entered to twrp an wiped system partition now the s6 cant boot i tried to flash it via odin but odin cant detect it in download mode i installed samsung usb drivers but the same problem i tried to boot via external storage in recovery mode but TWRP don't see the usb otg. is there a chance to flash it. i did all the solution like adb skipsoft toolkit samsung kies smart switch without result. help me please
Click to expand...
Click to collapse
Greetings and welcome to assist. As you have wiped your system the phone will not boot. If you are struggling with odin then you can either flash a rom like this
http://forum.xda-developers.com/galaxy-s6/development/mod-wanamlite-1-0-t3095155
through twrp or you could try kies emergency firmware recovery if you want to return to stock
Good Luck
Sawdoctor
Hello Guy's
I have the problem, that my Note 10.1 N8000 cant bootup. If I power on, the Samsung Screen appears and that was it.
I've done nothing on the tablet like:
Unlock BL
Custom ROM
I also cant bootup into the recovery mode. Only the download mode is semi functional. If I boot into dload mode I cant access the device via adb or odin.
Hope anyone can help
Best regards
Schmand
Flash stock rom via Odin .
Schmand said:
If I boot into dload mode I cant access the device via adb or odin.
Click to expand...
Click to collapse
JJEgan said:
Flash stock rom via Odin .
Click to expand...
Click to collapse
Tested at first but as I sad before, odin and adb doesn't recognise the tab.
Schmand said:
Tested at first but as I sad before, odin and adb doesn't recognise the tab.
Click to expand...
Click to collapse
Samsung Drivers installed .
Tried a different USB cable usb port PC .
Try searching your problem on the forum multiple identical posts .
I have a Samsung core i8262 device, i flashed with Cosmic Rom last night and it is stuck on the logo of cosmic rom, I have installed CMW recovery but i can't find my sd card in there, it shows " Choose zip from auto", when i click that it doesnt do anything, i tried entering download mode but odin doesn't detect my phone, i have tried installing & reinstalling kies but no results, installed samsung drivers and adb nothing works, i currently can enter cmw recovery and download mode, but download mode doesnt detect in my pc i tried in my laptop too no results, can someone help me, by mistake i've wiped system in cmw after installing cosmic rom, so i think thats the problem, any suggestions?:crying::crying:
Do you tried to change the usb cable?
Try a different odin version or try opening odin in admin mode first then connecting your phone to the cable (with the phone already in download mode before you plug it in)