Related
I've looked at every tutorial I could find and none of them say what to do if flashing SuperSU doesn't work. I know my bootloader is unlocked , I'm running TWRP v2.8.5.1 and trying to flash SuperSU v2.02 but v2.01 does not work either. I am running CM12 as well. Any help would be much appreciated, thanks in advance.
Maybe you are flashing some old supersu binaries!Search for SuperSU V.2.46
del
Also update TWRP to latest (2.8.6.0) and indeed flash SuperSU designed for Lollipop (2.01 and 2.02 are old ones).
TWRP 2.8.6.0 Link:
https://dl.twrp.me/bacon/twrp-2.8.6.0-bacon.img.html
SuperSU 2.4.6 Link:
https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
Twrp should give you the option to root the phone after you flash the rom. Are you sure you don't need to enable it in the developer options?
Sent from my Oneplus One using Tapatalk
SuperSU setting -> Uncheck Respect CM Root settings
Enable SuperSu
Dev. Options -> turn OFF Update Cyanogen recovery
Can we install xposed on the stock rooted cm13 nightly on this phone? Or do we have to install another ROM? This phone confuses me how its already rooted but there are still guides on how to root it.... and yes I have twrp.
yes you can use xposed on official cm13.. but be aware of the modules.. some are still not compatible with 6.0 and result in a bootloop
Which version is the proper one to install for this phone
NexusS4gFreak said:
Which version is the proper one to install for this phone
Click to expand...
Click to collapse
Two steps
Download and install this file as an apk
http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
Download and flash this file from your custom recovery like TWRP
http://forum.xda-developers.com/attachment.php?attachmentid=3543418&d=1447616689
Now, you can install the supported list of xposed modules
Hi guys, after a long time out i've come back to XDA and installed COS13 (S2JK release).
I rooted my OnePlus One with SuperSU v. 2.65 (stable) then i downloaded and flashed xposed-v84-sdk23-arm.zip, then installed the XposedInstaller_3.0_alpha4.apk.
But when i tried to activate Xposed i got the infamous "xposed not yet compatible with SDK 23 or your processor architecture (armeabi-v7a)" error.
After some reading here and there, i found out that ppl is still fine with Xposed v.80, so i installed everything again...and i got the same error. I also tried to install supersu v 2.68 burt to no avail.
What's wrong with that? Isn't COS13 supposed to work with Xposed?
Can anyone point me out in the right direction?
Thanx in advance
i dont know how to solve your problem but I have xposed-v84-sdk23-arm working perfectly on a clean flash of COS 13 from the official full zip from cyanogen. Using supersu 2.65 stable
ben.k said:
i dont know how to solve your problem but I have xposed-v84-sdk23-arm working perfectly on a clean flash of COS 13 from the official full zip from cyanogen. Using supersu 2.65 stable
Click to expand...
Click to collapse
Thank you for confirming that it works....now that really bothers me.
Why do i get that error? I have a fresh clean COS13..
As far as i know, Xposed should work fine in selinux enforced mode..but just to make sure...are you in enforced mode?
P.S. Should i first install the app and THEN flash the framework? Does that make any difference?
Vonnegut said:
Thank you for confirming that it works....now that really bothers me.
Why do i get that error? I have a fresh clean COS13..
As far as i know, Xposed should work fine in selinux enforced mode..but just to make sure...are you in enforced mode?
P.S. Should i first install the app and THEN flash the framework? Does that make any difference?
Click to expand...
Click to collapse
xposed working fine for me, I'm using cos 13 latest rom,
Rooted
Xposed
Custom kernel
All working fine
Ok, i solved the problem...i'm a moron. I put both the kitkat and the marshmellow Xpsed apk inside the same folder...and guess which one i installed on marshmellow? LOL!
I didin't know about Commotio until I accidently came across it while searching for the latest Vanir ROM. For what I know, Commotio and Vanir share the same device tree and are much similar. Commotio however releases new functionality in it's ROM's that eventualy might endup in a Vanir ROM. (Anyone, correct me if I'm wrong).
So I got curious and tested Commotio's last build, B140 08202017 for the hiaeuhl. I must say, this is an excellent ROM if your bored with LinageOS. Stable, fast and comes with full OMS support for substratum. During the installation (flash by twrp) it installs the latest stable magisk version by default. I found out that the latest superSU+suhide is much more stable. So I removed magisk and rooted Commotio with SuperSU+suhide, SafetyNet doesn't stand a chance.
Links:
Commotio ROM's for the hiaeuhl here
Magisk removal tool (flashable zip) here
Latest SuperSU by Chainfire (flashable zip) here
Suhide 1.08 by Chainfire (flashable zip) here
Aroma SuperSUconfig 1.00 (flashable zip) here
OpenGApps here
Installation:
1. Clear data and dalvik/cache
2. Flash ROM
3. Flash GApps
4. Remove Magisk or keep it as it is and enjoy your ROM (remove Magisk Manager manually once booted into OS)
5. Flash SuperSUconfig. Choose to disable forced data encryption and install in systemless SBIN mode (important!)
6. Flash latest SuperSU
7. Flash latest suhide
8. Reboot
I want to remind you guys, you have to be on MM firmware with the latest TWRP recovery installed to get this to work.
Enjoy
Some screenshots can be found here
And oh, don't bother me with old threads about Commotio just to point out you remember what you've read two years ago. I'm just trying to keep the forum alive and maybe trigger custom developers to provide us with more ROM's.
My Device Us Unlocked. S-off Rooted. Firmware 2.18.617.30 Nougat 7.0 . How Can I install that Rom ?
Hi
Hi guys i need a help can someone take the nogut version twrp backup for htc one a9 or please make the sense based nogut rom plz.plz
Nuroxy said:
My Device Us Unlocked. S-off Rooted. Firmware 2.18.617.30 Nougat 7.0 . How Can I install that Rom ?
Click to expand...
Click to collapse
first you have to downgrade your firmware to 1.5x or wait for developers to publish a ROM capable of working with 2.X firmware. I have feeling this is gonna take some time. Once set to the right firmware, flash the ROM as you usually do.
eavandijk83 said:
I didin't know about Commotio until I accidently came across it while searching for the latest Vanir ROM. For what I know, Commotio and Vanir share the same device tree and are much similar. Commotio however releases new functionality in it's ROM's that eventualy might endup in a Vanir ROM. (Anyone, correct me if I'm wrong).
So I got curious and tested Commotio's last build, B140 08202017 for the hiaeuhl. I must say, this is an excellent ROM if your bored with LinageOS. Stable, fast and comes with full OMS support for substratum. During the installation (flash by twrp) it installs the latest stable magisk version by default. I found out that the latest superSU+suhide is much more stable. So I removed magisk and rooted Commotio with SuperSU+suhide, SafetyNet doesn't stand a chance.
Links:
Commotio ROM's for the hiaeuhl here
Magisk removal tool (flashable zip) here
Latest SuperSU by Chainfire (flashable zip) here
Suhide 1.08 by Chainfire (flashable zip) here
Aroma SuperSUconfig 1.00 (flashable zip) here
OpenGApps here
Installation:
1. Clear data and dalvik/cache
2. Flash ROM
3. Flash GApps
4. Remove Magisk or keep it as it is and enjoy your ROM (remove Magisk Manager manually once booted into OS)
5. Flash SuperSUconfig. Choose to disable forced data encryption and install in systemless SBIN mode (important!)
6. Flash latest SuperSU
7. Flash latest suhide
8. Reboot
I want to remind you guys, you have to be on MM firmware with the latest TWRP recovery installed to get this to work.
Enjoy
Click to expand...
Click to collapse
How about the camera working on Commotio ??????in lineage os camera is not working properly.and most of 3rd party camera app not working....
Camera is working fine
Tried latest build on 1.56.401 firmware Encryption unsuccesfull error all the time.
Someone know if in this rom with old firmware the hotspot working?
Hey I'm on the new firmware and I've been trying to follow your instructions here and am failing. I am able to follow you till flashing the magisk uninstaller. Then when I use the aroma installer to config su on the first page i select systemless bin mode(explicitly states for >=8.0) then i disable force encryption and click on next and complete config but when i flash the superuserSU.zip it installs the binary files in the /data/ directory and then the suhide fails to install. am I doing something wrong.?
Namaless said:
Someone know if in this rom with old firmware the hotspot working?
Click to expand...
Click to collapse
newest version woking fine .best rom ever :good:
I am here to share the patch Viper4Android on MIUI11 BASE ON ANDROID 10.
IT'S WORKING FOR ME
PRE REQUISITE
TWRP AND ROOTED also magisk is installed.
1. INSTALL SELINUX And set it to permisive, set the app on autosatart, and reboot your device
2. Install VIPER4ANDROID APK
grant root access with ask to install driver click install then reboot device.
"You will get bootloop after you install the driver just go to recovery mode by pressing volume up and power down
3. Flash Viper4Android patch on TWRP and reboot. And Viola you have now Viper4Android perfectly installed.
Selinux
https://androidfilehost.com/?fid=4349826312261708284
Viper apk
https://androidfilehost.com/?fid=4349826312261708285
Viper patch
https://androidfilehost.com/?fid=4349826312261708283
Credits to Munchy
Just subscribe to he's channel on YouTube
does it work on other android 10 base phone?
locolyric said:
does it work on other android 10 base phone?
Click to expand...
Click to collapse
Only for Miui base custom rom
It has successfully installed, but it doesn't work at all. Mi8 UD, miui 11 20.1.16, A10.
Drivers Version: 2.5.0.4
NEON: off
Driver: off
And so on...
Attach audio effect is on and writes "all sessions but 0"
Compatibility moed doesn't help.
It works for me after installed mod systemless hosts from Magisk Manager settings. Also, i enabled auto start and other permissions for Selinux and ViPER4Android FX. Didn't get any bootloops and i don't install ViPER patch with twrp. After reboot first time phone from ViPER app, you will be prompted to install again drivers. Just repeat steps. Reboot phone when you ask in app and finally you will have mod installed and enabled.You can also delete Selinux after finish. Miui 11 with android 10
Works great on miui eu 11.0.4.0
Thank you!
Nice! Works on global stable 11.0.4.0 even without patch. Took some reboots, but now it is installed and processing. Yay! Thanks!
Any one having working DTS X IN MIUI 11 Q... getting empty screen.. can you share the steps pls
Not here. Following the steps, bootloop.
Found this link. And followed same but in middle I have used that patch mentioned in this thread to resolve the boot loop issue.
Finally my viper is working.
https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-how-to-install-viper4android-t4037959
All perfect here - pocophone f1 / miui 11 android 10 / no gravity kernel last build
tatuboy said:
I am here to share the patch Viper4Android on MIUI11 BASE ON ANDROID 10.
IT'S WORKING FOR ME
PRE REQUISITE
TWRP AND ROOTED also magisk is installed.
1. INSTALL SELINUX And set it to permisive, set the app on autosatart, and reboot your device
2. Install VIPER4ANDROID APK
grant root access with ask to install driver click install then reboot device.
"You will get bootloop after you install the driver just go to recovery mode by pressing volume up and power down
3. Flash Viper4Android patch on TWRP and reboot. And Viola you have now Viper4Android perfectly installed.
Selinux
https://androidfilehost.com/?fid=4349826312261708284
Viper apk
https://androidfilehost.com/?fid=4349826312261708285
Viper patch
https://androidfilehost.com/?fid=4349826312261708283
Credits to Munchy
Just subscribe to he's channel on YouTube
Click to expand...
Click to collapse
thank you very much for this great job.. you are the best, man ???
tatuboy said:
I am here to share the patch Viper4Android on MIUI11 BASE ON ANDROID 10.
IT'S WORKING FOR ME
PRE REQUISITE
TWRP AND ROOTED also magisk is installed.
1. INSTALL SELINUX And set it to permisive, set the app on autosatart, and reboot your device
2. Install VIPER4ANDROID APK
grant root access with ask to install driver click install then reboot device.
"You will get bootloop after you install the driver just go to recovery mode by pressing volume up and power down
3. Flash Viper4Android patch on TWRP and reboot. And Viola you have now Viper4Android perfectly installed.
Selinux
https://androidfilehost.com/?fid=4349826312261708284
Viper apk
https://androidfilehost.com/?fid=4349826312261708285
Viper patch
https://androidfilehost.com/?fid=4349826312261708283
Credits to Munchy
Just subscribe to he's channel on YouTube
Click to expand...
Click to collapse
This method works for poco f1 miui eu 11.0.4.0 Android 10.
Works well in my poco f1 miui.eu 11 Android Q , Magisk 20.3, No Gravity Custom Kernel :fingers-crossed:
I use with other mods (Dolby Atmos and ICE ICESound) in this link:
https://forum.xda-developers.com/redmi-note-7/how-to/dolby-digital-plus-viper4-miui-pie-rom-t3958080
hey, you seem like you know your way around the Viper mod, I saw your posts in other threads.
yesterday I followed instructions from the link you provided and got stuck in bootload screen after installing drivers. should I have flashed the patch which was given in the OP of this thread?
What about SELinux, I'm not sure what it is, do I need to apply it? if yes, how to in this case? I have the same configuration as you, MIUI 11 FOR POCO from Xiaomi.eu +Magisk 20.3 + No Gravity Kernel
thank you in advance
If anyone else knows the answers, please share, I'd appreciate it
also, is there any place where I can find information on what is the difference between Viper 4Anroid + DDP and Airun/Sauron mod? I'm totally lost
krzylew said:
hey, you seem like you know your way around the Viper mod, I saw your posts in other threads.
yesterday I followed instructions from the link you provided and got stuck in bootload screen after installing drivers. should I have flashed the patch which was given in the OP of this thread?
What about SELinux, I'm not sure what it is, do I need to apply it? if yes, how to in this case? I have the same configuration as you, MIUI 11 FOR POCO from Xiaomi.eu +Magisk 20.3 + No Gravity Kernel
thank you in advance
If anyone else knows the answers, please share, I'd appreciate it
Click to expand...
Click to collapse
Easy, selinux changer is used to change from enforcing to permissive mode so viper can run as per normal. You need to set it as auto start for this app.
Now that you stuck in bootloop is because you haven't used twrp to install the patch. Once install, it should boot into screen.
Hey, thank you!!! Managed to install everyting and seems to work
Just one quick question, when I exit the Dolby app, there is a notification saying "Remote service has stopped" - is this the way it's supposed to be?
krzylew said:
Hey, thank you!!! Managed to install everyting and seems to work
Just one quick question, when I exit the Dolby app, there is a notification saying "Remote service has stopped" - is this the way it's supposed to be?
Click to expand...
Click to collapse
No idea on Dolby app. I'm using poco too with miui Eu Android 10 rom. Bet this is not dolby atmos app.
Have you tried to reinstall it? Or maybe try audio modification library module?
thomas140 said:
No idea on Dolby app. I'm using poco too with miui Eu Android 10 rom. Bet this is not dolby atmos app.
Have you tried to reinstall it? Or maybe try audio modification library module?
Click to expand...
Click to collapse
I think that occasional reboots during phone configuration solved the problem. Thank you for your input.
[/QUOTE][/QUOTE][/QUOTE]Does it work for pixel based evo X roms and
---------- Post added at 09:13 PM ---------- Previous post was at 09:05 PM ----------
Johnjamess said:
Does it work for pixel based evo X roms and
Click to expand...
Click to collapse
Tested it out on evo x latest build works perfect!