Database Info

Galaxy Tab 7.0 Plus GT-P6200 hang logo.

i have one Samsung Galaxy Tap GT-P6200 hang in logo.Please tell me how to flash this phone with Odin or show me the produce.thanks

jimmymobile said:
i have one Samsung Galaxy Tap GT-P6200 hang in logo.Please tell me how to flash this phone with Odin or show me the produce.thanks
Click to expand...
Click to collapse
Wrong section.
Please re-explain what you mean. Are you bricked? Use better English please.

Thread moved to General.

I also have this problem. My tab got drained so when I got home, I plugged in the charger to the tab. Then I pressed the power button. So the tab opened but it hangs when the SAMSUNG logo is on the screen. I tried to wait it out for around 10mins but nothing happened, it remained in the SAMSUNG logo. So I tried holding the power button for 15secs to reboot but when it rebooted, the tab still hangs in the SAMSUNG logo.
Please help. I just bought this tab 3days ago. It is not rooted and so far I have installed only around 10 apps and games all from the market. Im not sure what caused this problem.

check in the development section under official firmwares post. there are official firmwares and instructions for odin. try to charge up battery as much as possible. a failed Odin flash could be a perma-brick. If you have Kies , I think there is an emergency software recovery option as well.

chrisrotolo said:
check in the development section under official firmwares post. there are official firmwares and instructions for odin. try to charge up battery as much as possible. a failed Odin flash could be a perma-brick. If you have Kies , I think there is an emergency software recovery option as well.
Click to expand...
Click to collapse
thanks for the reply dude. so im gonna have to flash this tab. i checked the instructions and all is good except for the ROM to use. there are 2 ROMs posted for the P6200. Im not sure which one i should use. I bought my tab here in Manila. All i know is that its a P6200 3g tab. Could i just pick anyone from the two?

The KK5 is the original firmware that the p-6200 came with . If you install that, as soon as you run it, it should be giving you the notification that an update is available . There will be 2 incremental upgrades and you will end up with KL1.
Or you can directly download the KL1 .
P_

pakalrtb said:
The KK5 is the original firmware that the p-6200 came with . If you install that, as soon as you run it, it should be giving you the notification that an update is available . There will be 2 incremental upgrades and you will end up with KL1.
Or you can directly download the KL1 .
P_
Click to expand...
Click to collapse
thanks dude! anyway im still thinking if i should flash this now or just bring it to Samsung for service. im afraid that if i flashed this, Samsung might say that ive been tinkering with it.

Before venturing yourself into flashing the stock rom why don't you try a factory reset from the recovery menu :
Turn off the tablet
Press at the same time the power button and the volume up button
As soon as you see the galaxy logo release the power button but keep the volume up pressed until the recovery menu pop up
Select the factory reset option using the volume button and confirm with the power button
I am pretty sure that it will fix your problem
Let me know how it goes
P_

pakalrtb said:
Before venturing yourself into flashing the stock rom why don't you try a factory reset from the recovery menu :
Turn off the tablet
Press at the same time the power button and the volume up button
As soon as you see the galaxy logo release the power button but keep the volume up pressed until the recovery menu pop up
Select the factory reset option using the volume button and confirm with the power button
I am pretty sure that it will fix your problem
Let me know how it goes
P_
Click to expand...
Click to collapse
thanks dude!! the problem was fixed after the factory reset.
im still wondering though what caused the problem. ill probably try draining the battery again to see if this problem reoccurs.
thanks again!!!

successfully done p 6200

Hi all. I've had the same problem last month. My P6200's battery got drained and was kind of in a boot loop. I didn't know how to do a factory reset then so I looked online for a Samsung Service Center here in the Philippines. I was advised that my device was not covered by International Warranty as I bought it outside of the Philippines (I got mine in India) as only Samsung cameras have have international coverage. The guy still tried to flash it, however, it did not fix the problem. Now it just boot loops to the Samsung Galaxy Tab 7.0 Plus and does not reach the Samsung logo that it used to go to after that.
I'm trying to reset my tab but pressing and holding the power and volume up buttons don't work. Please advise what I can do. I don't want this device to go to waste.
Many Thanks!

ive also had the same problem duno wut to do anymore

Had bootloop problem too
Download Odin and the appropriate firmware for your region then flash it via Odin(turn off tab,press volum down and power until you go in download mode then connect the tab to pc,click pda on Odin,click start,wait to flash)
Good luck

i had the same problem before, when i restart my tab, it was stuck at samsung logo, i wait for 15m but still the same and then i connect to my laptop.
amazingly, kies can detect my tab, so i did backup, suddenly samsung logo disappeared and enter homescreen. maybe around 15m more after i connect to my laptop.
my suspect was the ADW laucher because there's no problem before i installed adw launcher and set it as default launcher.

Try clearing dalvik cache from recovery ....worked for me....please keep it as a personal opinion....search threads for better solutions....try this if nothing works...
Sent from my GT-P6200 using Tapatalk 2

gudbud said:
Try clearing dalvik cache from recovery ....worked for me....please keep it as a personal opinion....search threads for better solutions....try this if nothing works...
Sent from my GT-P6200 using Tapatalk 2
Click to expand...
Click to collapse
Not sure if trolling or not reading dates... The last post in this thread is from May...
Sent from my myTouch 4g via Tapatalk

i tried factory reset so many time but still stuck..my problem now is it keep rebooting after flashing 3.2 HC..anybody please

Same
jerung16 said:
i tried factory reset so many time but still stuck..my problem now is it keep rebooting after flashing 3.2 HC..anybody please
Click to expand...
Click to collapse
SAME!!!

CLink08 said:
SAME!!!
Click to expand...
Click to collapse
New here? If you are on HC.. enter recovery then wipe cache and partition.. you're welcome
Sent from my GT-P6200 using XDA Premium HD app

[Q] brick phone need help!

Galaxy Skyrocket phone was running custom rom
decided to return to samsung official rom. Connected the phone to odin was in process of bringing to factory rom thats when BY mistake i disconnected the cable from phone. I tried the process again would not work stuck at "firmware upgrade encountered ad issue. Please select recovery mode in Kies & try again. Message reads
I tried the power button volume up and down nothing is working. NEED HELP!

When you see that error screen your still in download mode. Plug back into computer and reflash the odon tar again. Be careful this time
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

Yeah it will say error select recovery mode in keys.
But your still in dl mode. I have pulled the cable during odin atleast ten times
Your fine just proceed

no. on the top screen says odin mode. product name:sgh-i727
custom binary download: yes (2 counts)
current binary:custom
and the rest message says, Please select recovery mode in Kies & try again

On the screen does not say downloading mode just the error message. will try the the odin and refresh tar.

dahraf said:
On the screen does not say downloading mode just the error message. will try the the odin and refresh tar.
Click to expand...
Click to collapse
Your not reading what were trying to tell you. That is still download mode. Flash the odin tar again
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

It'll happen again and again if you flash often. It may not say download mode BUT IT IS. Simply unplug your phone. Open Odin. Flash. Wait. It will work I promise. If u were fully bricked you would have no screen.
Sent from my SAMSUNG-SGH-I727 using xda premium

Got the phone working. Tried flashing several time didnt work. I changed to another USB port and flashed with ODIN and all worked good. THANK YOU ALL FOR THE HELP.

dahraf said:
Got the phone working. Tried flashing several time didnt work. I changed to another USB port and flashed with ODIN and all worked good. THANK YOU ALL FOR THE HELP.
Click to expand...
Click to collapse
Sweet, glad you got her running
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

dahraf said:
Galaxy Skyrocket phone was running custom rom
decided to return to samsung official rom. Connected the phone to odin was in process of bringing to factory rom thats when BY mistake i disconnected the cable from phone. I tried the process again would not work stuck at "firmware upgrade encountered ad issue. Please select recovery mode in Kies & try again. Message reads
I tried the power button volume up and down nothing is working. NEED HELP!
Click to expand...
Click to collapse
Give this a try. It works great!
http://forum.xda-developers.com/showthread.php?t=1342348

Galaxy S6 bootloop

Hey experts so i have the S6 gm-920F i updated OTA and now the phone doesnt recognize the fingerprint and forgot the password so i install TWRP 3 via odin booted the recovery and transferred my data successfully then I made a factory reset to delete the passcode to be able to use the phone after making the reset and pressing reboot system it gets stuck in the recovery the system doesn't reboot so i tried hard rebooting the phone is stuck on black screen that says samsung galaxy s6 and restarts restarts restarts (bootloop) i tried reflash the 6.0.1 bootloader no luck then flash 5.1 bootloader flashed philz recovery then 6.0.1 bootloader still nothing! Did i damage something serious ? does a fresh firmware install through odin bring my phone back to life ? Thanks in advance

Please try a fresh install of Firmware. Install MM bootloader and modem first with TWRP MM compatible recovery and download an extra lite MM rom to see if your phone will come back to life, (using extra lite package is less of a download than a stock 2gb download)

TWRP is what gave me the problem once i enter i can exit from there ! i got the stock firmware tried to flash using odin then get fail! please can you give a noob some simple instructions with links ?

Hi mate, Try flashing through ODIN a TAR image for your phone version. You can find a TAR on a website such as sammobile. Once you have download the tar put your phone into download mode by pressing and holding Volume Down, Home and Power keys at the same time. Start ODIN and connect the phone to your computer, click AP and browse and find the TAR file you downloaded. Then click start and it should flash back stock firmware for your phone.

spkos.kos said:
Hi mate, Try flashing through ODIN a TAR image for your phone version. You can find a TAR on a website such as sammobile. Once you have download the tar put your phone into download mode by pressing and holding Volume Down, Home and Power keys at the same time. Start ODIN and connect the phone to your computer, click AP and browse and find the TAR file you downloaded. Then click start and it should flash back stock firmware for your phone.
Click to expand...
Click to collapse
thats what i did i got failed in the last (hidden.img) problem

elias1995ish said:
thats what i did i got failed in the last (hidden.img) problem
Click to expand...
Click to collapse
Another Solution i have is to try Samsung Smart switch software. That might solve your problem, I have used it before when I was stuck .

spkos.kos said:
Another Solution i have is to try Samsung Smart switch software. That might solve your problem, I have used it before when I was stuck .
Click to expand...
Click to collapse
Yes i'm currently trying smart switch software hopefully it will fix !! there is no way that i have hard bricked my device right?

elias1995ish said:
Yes i'm currently trying smart switch software hopefully it will fix !! there is no way that i have hard bricked my device right?
Click to expand...
Click to collapse
I can't promise that you haven't, however it is extremely hard to hard brick a phone these days. There are many ways to try and restore it to previous condition not all of which I am familiar with, if this doesn't solve your problem keep scouring XDA for an answer, undoutably a more skilled dev will be able to help you

spkos.kos said:
I can't promise that you haven't, however it is extremely hard to hard brick a phone these days. There are many ways to try and restore it to previous condition not all of which I am familiar with, if this doesn't solve your problem keep scouring XDA for an answer, undoutably a more skilled dev will be able to help you
Click to expand...
Click to collapse
THANK GOD!! smart switch fixed the issue for me now boots up fine

elias1995ish said:
THANK GOD!! smart switch fixed the issue for me now boots up fine
Click to expand...
Click to collapse
Good job dude! Hit thanks if that solved it fully for u!

Samsung Galaxy S6 Stuck on Samsung Boot Logo

I was trying to root my phone, and it passed, then wouldn't go past the boot logo. So I tried to flash my phone to a stock rom, but I accidentally used a rom for a different build. My phone's build is G920AUCS4CPG1. I can't find a stock rom for my phone, and I can't get it to go past the boot logo, even after getting into recovery and trying to delete the cache and factory reset the phone. Please help asap. Btw carrier is AT&T
EDIT: Had it plugged into a charger, guess it's not charging now? It's hooked up and it shows the battery icon but it's empty and not recharging. Buttttt, if I unplug it from the charger and hold the power button and volume down, it turns off and goes back to the samsung logo.

ethant0225 said:
I was trying to root my phone, and it passed, then wouldn't go past the boot logo. So I tried to flash my phone to a stock rom, but I accidentally used a rom for a different build. My phone's build is G920AUCS4CPG1. I can't find a stock rom for my phone, and I can't get it to go past the boot logo, even after getting into recovery and trying to delete the cache and factory reset the phone. Please help asap. Btw carrier is AT&T
EDIT: Had it plugged into a charger, guess it's not charging now? It's hooked up and it shows the battery icon but it's empty and not recharging. Buttttt, if I unplug it from the charger and hold the power button and volume down, it turns off and goes back to the samsung logo.
Click to expand...
Click to collapse
same here...

RomeroPT said:
same here...
Click to expand...
Click to collapse
Use smart switch. Best tool ever.
Sent from my SM-G925F

Rosli59564 said:
Use smart switch. Best tool ever.
Sent from my SM-G925F
Click to expand...
Click to collapse
Smart Switch crashes after I put my S/N and hit accept. I can't get my phone to get recognized.

Try your luck with different pc.
Sent from my SM-G925F

Same problem here. I'll make a thread in a monent, but I can't get to recovery, so Smart Switch doesn't want to reset my phone.

Lol i was ancounter same problam just download latest stock firmware from sammobile and flash all file toghter Bootloader,Ap,csc,modem

IrfankhanXda said:
Lol i was ancounter same problam just download latest stock firmware from sammobile and flash all file toghter Bootloader,Ap,csc,modem
Click to expand...
Click to collapse
Can you please explain in a little more detail? I greatly appreciate the response though. My model is SM-G920A and my build number is G920AUCS4CPG1, if you can find my stock firmware that'd be amazing.

Just google sammobile firmware website and put your model no. There and select your varrient country and download latest firmware for your varrient and you can download latest odin.exe from below page after downlading your firmware you need to put your phone into donwload mode swtich offf your phone then press volume down and power button toghter you will get a warning message just continue now open odin on your pc and connect your mobile you have to extract firmware zip and you will get 4 File put all file on their button in odin and clixk start and wait untill firmware flash complet after that you phone will reboot automaticly if you stuck into bootloop just force restart your phone and go into recovery wipe data and catch you will back your phone sorry for my bad english if you did not flash anything or root your phone then you can try wiping methode maybe its work

Samsung GT P1000 stuck

I wonder if someone could help me. I successfully rooted my old GT P1000 with the intention of updating it from Gingerbreadvto run Jelly Bean. However whilst trying to install Clockwork Mod recovery it seems to be stuck on a black screen showing a phone and a computer with a warning sign showing that the connection between phone and computer has been broken. I used Odin 1.7 to flash Cwm. While I was trying to do this Is I kept seeing a message that the flashing had failed. After several attempts I tried to switch off my tab. After trying to switch it off I got the black screen as described previously. I have tried the usual power + volume button to reset it but it just stays stuck on the same screen. The tab will now switch off but when I switch it back on I get the same black screen. When I attach it to my computer, Odin 1.7 recognises that it is attached. Any help would be gratefully received. Many thanks Michel

Velocegbr said:
I wonder if someone could help me. I successfully rooted my old GT P1000 with the intention of updating it from Gingerbreadvto run Jelly Bean. However whilst trying to install Clockwork Mod recovery it seems to be stuck on a black screen showing a phone and a computer with a warning sign showing that the connection between phone and computer has been broken. I used Odin 1.7 to flash Cwm. While I was trying to do this Is I kept seeing a message that the flashing had failed. After several attempts I tried to switch off my tab. After trying to switch it off I got the black screen as described previously. I have tried the usual power + volume button to reset it but it just stays stuck on the same screen. The tab will now switch off but when I switch it back on I get the same black screen. When I attach it to my computer, Odin 1.7 recognises that it is attached. Any help would be gratefully received. Many thanks Michel
Click to expand...
Click to collapse
Flash the stock firmware for your specific model number via Odin.
Then start over with flashing CWM.
Sent from my LGL84VL using Tapatalk

Thanks for that. Do you have any idea where I might find the stock firmware for a P1000
Thanks Michel
Droidriven said:
Flash the stock firmware for your specific model number via Odin.
Then start over with flashing CWM.
Sent from my LGL84VL using Tapatalk
Click to expand...
Click to collapse

Velocegbr said:
Thanks for that. Do you have any idea where I might find the stock firmware for a P1000
Thanks Michel
Click to expand...
Click to collapse
Google search for:
"Stock firmware for Samsung P1000"
Or
"Return to stock (your model number)"
You'll probably find it at Sammobile .com or at samsung-updates .com.
Sent from my LGL84VL using Tapatalk