So I've discovered something recently and was wondering if this only affects me. Using the NextRadio app, now that the fm chip has be activated, I've notice that the audio is fuller, louder, and overall much better than what I would get with regular flac files or streaming through Rhapsody. Why is that? Also uhq upscaler doesn't effect the audio and neither does the eq which makes me wonder if the dac and amp in the phone are being held back by software. Can someone also check this out? If you use the NextRadio app you might have to give it a few seconds after choosing a station. I noticed the audio greatly improves after but idk it might just be my phone. I've also noticed that when opening a game the audio changes drastically over fm giving it a lot more bottom end. This is really strange to me, Thanks!
Related
Question Bluetooth Audio Quality
Does anyone have experience with how the audio sounds when connected via bluetooth? Is it as good as coming from the phone speakers? does the software allow to equalize the output? looking for a phone just for my car that works good with bluetooth, does not cost that much and has equalizing software built in... My personal phone now is a Note 5 but damn SoundAlive+ crashes when using Google Play Music and turning off the equalization sounds horrible...
mahst68 said:
Question Bluetooth Audio Quality
Does anyone have experience with how the audio sounds when connected via bluetooth? Is it as good as coming from the phone speakers? does the software allow to equalize the output? looking for a phone just for my car that works good with bluetooth, does not cost that much and has equalizing software built in... My personal phone now is a Note 5 but damn SoundAlive+ crashes when using Google Play Music and turning off the equalization sounds horrible...
Click to expand...
Click to collapse
BT good for me. Viper4android Works great for eq.
Bluetooth is fine. Its HQ SBC. No Apt-X support. Only EQ available is the terrible JBL "enhancement". Luckily it can be turned off.
Hello,
I have a relatively severe issue with the Bluetooth audio quality on my phone. It sounds pretty much exactly like 64kbits MP3, you can especially hear it in the high frequencies. It's somehow distorted and unclear and extremely annoying as it ruins the experience totally. Everyone who heard sound over my Bluetooth devices has heard this.
The weird thing: I experienced this with both my Galaxy S5 (G900F) and my Galaxy S6 (G920F) and every single Bluetooth device that is connected to them. I tried it with my Logitech Bluetooth Audio Adapter, Denon AVR X1100W, Logitech Boombox and my car stereo Kennwood KDC-BT35U. The audio quality is always the same.
However, with my Nexus 5, my Galaxy Tab S8.4 and my Laptop, the audio quality over Bluetooth is great! Also, if I use the headphone jack on my Galaxys, it sounds just fine. I mostly use Spotify and Google Play Music, but the problem is not there since it sounds great when using a cord.
I asked the Samsung Support about this and of course they didn't know anything. They offered replacing the device but I don't think that this makes a difference since I had the same problem on my Galaxy.
Now I am asking everyone else who has the Galaxy S5 or S6, have you experienced something like this? Any solutions? It is very frustrating.
I just solved this mystery. For a long time I have been using the Mi Fitness Band, and I was wearing it all the time, so whenever that is connected to the phone the audio quality gets very bad. At least I know what it is now!
Same here!
If my Mi Band 2 is paired in the Mi Fit app, the audio quality of ANY connected bluetooth device (aux speaker, car audio etc.) is distorted (especially high sounds)
I reinsatlled the Mi Fit app, even reseted the whole phone, nothing changes. Only if I unpair the Mi Band in the mi fit app, is the bluetooth audio quality ok.
Samsung Galaxy S6 Android 6.0.1
Xiaomi Mi Band 2 firmware V1.0.1.34
Good audio quality at Bluetooth playback
Guys,
I experienced the same when i playback via Bluetooth in my car. Since i installed Poweramp beta, you can choose some different type of audio playback quality. I set mine at 24 bit playback, 192 khz. I can hear some slight difference but i think you can not expect much of it.
Second option might be Viper4android and Dolby Atmos. These will increase earsgasm at your desire.
Give it a try and report feedback!
Here is a screenshot of it.
Poweramp has unbelivable awesome effects, but it does not eliminate the base problem: miband (or any Bluetooth LE stuff?) affects the bluetooth audio transmission.
jtamass said:
Poweramp has unbelivable awesome effects, but it does not eliminate the base problem: miband (or any Bluetooth LE stuff?) affects the bluetooth audio transmission.
Click to expand...
Click to collapse
That is true and sadly a known problem of android in general. See http://www.androidauthority.com/android-wear-ruining-bluetooth-speaker-headset-sound-656300/
Solution
I might have a solution for some of you. Good luck.
Find it in my reddit post. I can't post URL's because i am new here. I only created this account for sharing the solution.
under r/miband, ''POSSIBLE SOLUTION for the BT Audio quality problem when you connect to both Miband + Audio device''
Does such a thing exist? I would like to have wireless headphones and watch shows but normally there is always a lag that bothers me too much to even attempt it. Has bluetooth 5 or even 4.2 fixed this?
Spud37 said:
Does such a thing exist? I would like to have wireless headphones and watch shows but normally there is always a lag that bothers me too much to even attempt it. Has bluetooth 5 or even 4.2 fixed this?
Click to expand...
Click to collapse
Don't use wireless headphones but, boeffla kernel allows direct DAC output, which may allow some improvement.
Else you can pay for MX player pro and adjust audio sync with any downloaded or streamed video mx can link to.
App based streaming, such as ITV player is limited to hardware. Bluetooth will have delay, because audio has to be converted to bluetooth transport with then must be converted back to audio. Plus the transport is slow in comparison to the faster DAC.
Hey XDA,
my question is related to the mics of bluetooth headsets.
Is it possible to disable them and use the one of the phone instead ? (The audio quality gets bad when calling with the bluetooth mic, I mean it should be better when disabling it).
SoundAbout doesn't work (incompatibility with Oreo ig) and other Apps don't have what i need.
Same goes to wired headphones with inline mics (since the one i use is crackling).
I'm thankful for any tries or hints on how I could make it work.
Have a nice day!:good:
Phone: LeMax2
Rom: RR 6.0.0 - Oreo 8.1.0
same problem here. I cannot find the solution.
This is just what I've been looking for.
This is how I think it goes: there's different channels where sounds goes, one is what you use for almost all media, (another one is that is used when you enable media player to play along with others or play games (not sure)), and one that where calls are. "Call mode" is what makes sound crappy and I think that microphone is related crappy sound too, because it needs more Bluetooth bandwidth to transfer mic and audio data at the same time. Reasoning behind those different channels is because I have screenrecorder which can record system sounds too, but it cannot record when phone uses Bluetooth earphones mic(when it is in "call mode"). And there's more why I think it is so: I always get notification that I'm in call even if I play pubg with microphone access enabled but don't use microphone or use live video platforms like Microsoft teams or Google meet. Also sound control is same as in normal voice call: can't really mute sound fully and if Bluetooth disconnects, it plays audio from phones speaker when in normal media player it pauses it or continues playing sound in same level as last used volume level on phone speaker.
I'm currently looking way to make audio of those "calls" go as media audio and make it use mic from phone. And also making discord channel for Android users to discuss about things like these and find useful features to make use of android much easier.
Correct if I'm wrong about anything stated earlier..
And if you have any tips where I could find more specific info on this.
I found way to make it use phones mic and thus making sound quality better
I used this "mic speaker" from play store. Unfortunately I don't yet have access to post links.
Edit: sorry, wrong call. Something happened in sound quality, but it's still crappy compared to wired earphones
I'm sorely upset with how bad the bluetooth music streaming is with my Hizpo Branded XRC MTCE. I'm to the point where I want to dump it and get something else since the one thing I wanted when I bought it was good music streaming. From all my reading on here, it seems like this is a major issue with all MCTD/MTCE units, is that true? Does anyone actually have a MTCD/E unit that has decent sounding bluetooth audio streaming?
Short answer YES. Long answer, search.
Ive spent hours searching with no definitive answer.
sev said:
Ive spent hours searching with no definitive answer.
Click to expand...
Click to collapse
The fyt based units have great a2dp streaming, no issues here. Most common reseller of these is joying.
gtxaspec said:
The fyt based units have great a2dp streaming, no issues here. Most common reseller of these is joying.
Click to expand...
Click to collapse
Are these MTCD/E's? Im not familiar with FYT. What's the best way to identify these?
anyone have a good way of identifying if a unit is MTCD/E or FYT? I want to pick up a bmw e46 specific fyt unit..
I suffered with poor a2dp Bluetooth streaming for quite a while on a GS (xtrons) android 6 headunit and on my current GS android 8 headunit.
Last week I did the sound mod with the modded mcu and improved amplifier app which improved my sound quality dramatically.
I then set about trying to improve the poor a2dp sound yet again and managed to kind of get it near perfect but not quite.
It was down to the sound settings on the EQ on my iPhone. I Bluetooth stream my music from my phone using Apple Music. I went into settings and then music and in there is the EQ setting. This has many settings like rock, pop, etc etc and mine was previously set by me to Bass Booster so my phone was set to a Bass setting and then the headunit is set more to a Bass setting so this must have been too much as I always got a distorted sound in the background when using a2dp. So in the EQ on my Iphone I set it to off. Instantly the sound is 10 times better as now it’s just my headunit producing bass etc etc. This has bugged me for over a year including my old headunit and now compared to what it were like before I’m finally happy with the quality of music through the a2dp app.
ab1702 said:
I suffered with poor a2dp Bluetooth streaming for quite a while on a GS (xtrons) android 6 headunit and on my current GS android 8 headunit.
Last week I did the sound mod with the modded mcu and improved amplifier app which improved my sound quality dramatically.
I then set about trying to improve the poor a2dp sound yet again and managed to kind of get it near perfect but not quite.
It was down to the sound settings on the EQ on my iPhone. I Bluetooth stream my music from my phone using Apple Music. I went into settings and then music and in there is the EQ setting. This has many settings like rock, pop, etc etc and mine was previously set by me to Bass Booster so my phone was set to a Bass setting and then the headunit is set more to a Bass setting so this must have been too much as I always got a distorted sound in the background when using a2dp. So in the EQ on my Iphone I set it to off. Instantly the sound is 10 times better as now it’s just my headunit producing bass etc etc. This has bugged me for over a year including my old headunit and now compared to what it were like before I’m finally happy with the quality of music through the a2dp app.
Click to expand...
Click to collapse
very interesting. I just checked my iphone and the EQ was set to 'electronic' I changed it to flat. Lets see how that does.
Did you do the 7thfloor mod? Did that, at all, help the a2dp streaming situation?
the EQ change made no difference. still distortion at the upper frequency range.
sev said:
very interesting. I just checked my iphone and the EQ was set to 'electronic' I changed it to flat. Lets see how that does.
Did you do the 7thfloor mod? Did that, at all, help the a2dp streaming situation?
Click to expand...
Click to collapse
No, the mod I have done is the bd375 sound processor mod with the modded GS mcu and new amplifier app.
Once I completed that then I fine tuned the EQ settings to my liking on the headunit. Then on my iPhone I went to settings and music and turned the EQ off. I tried all the EQ settings on my iPhone but nothing was as good as when I set it to OFF.
Now I’ve done this I wouldn’t say the sound is perfect through a2dp Bluetooth but it’s a hell of a lot better than what it were before.