Hey everyone,
Since a couple of days (installing MM B803) GPS is no longer working on my phone. When I try various tools it shows that there is a GPS sensor present but it will not find ANY sattelites. Anyone else had this problem? Should I consider this related to MM or just plain bad luck my sensor is broken.
Related
Hey!
The Issue: During a phone call the screen turns dark and will not reactivate...it will pop back up after the call disconnects. Hitting any of the site buttons does nothing.
I have tried flashing with the newest firmware (http://blog.geekbuying.com/index.ph...-firmware-released-0502-version/#.UtMOWM93vVI), and although it says this issue has been resolved, it does not fix the problem for me.
I heard that custom ROM fix the solution? (Saw it on this http://forum.xda-developers.com/showthread.php?t=1518663).
But last time I tried one of those, the phone bricked and it took me a while to get it back working (finding stock followed by lost IMEI).
Anyone know a solution? Or possibly a good solid custom ROM that will work? I would really appreciate your help!
I am also having this same issue but with my Cubot X6. However mine just doesn't work in the dark. During daylight it responds as it should.
After a lot of googling it seems to be a problem with jellybean as it occurs on a lot of other phones. A way of solving this would be to disable the proximity sensor but I can't find any settings to do so.
Need help
alrightiwill said:
I am also having this same issue but with my Cubot X6. However mine just doesn't work in the dark. During daylight it responds as it should.
After a lot of googling it seems to be a problem with jellybean as it occurs on a lot of other phones. A way of solving this would be to disable the proximity sensor but I can't find any settings to do so.
Need help
Click to expand...
Click to collapse
Hey! Not sure if this be of any help, but for me removing the screen (plastic) cover fixed the issue. I assume the screen cover was blocking a sensor thus resulting in my issues.
Just thought I let you know what worked for me...although I doubt your issue can be solved like this.
BTW, I suggest you start a new post, as this one is old and I doubt anyone will read it! also, check out geekbuying.com blog in regards to your phone. They might have more info.
Hello everyone,
I bought some days ago a second hand galaxy S6 (G920F), I checked if everything was working and then updated to official Marshmallow, installed TWRP 3.0, and finally moved to a custom ROM (Pure Stock ExtraLite Rom 4.1).
The problem is that I figured out I had a lot of sensors that were not working anymore like light sensor, gyroscope sensor (so also accelerometer etc...), the heart rate sensor seems only partially working, I didn't try the proximity sensor yet. Here is a screen of the sensor page after a *#0*#:
I already tried to clear cache, wipe everything with clean install, flash back official MM rom, tried to make a calibration using GPS status and toolbox (which shows there is a problem with almost every sensor), but absolutely nothing worked.
Right now I am out of clues and I need your help !
Thank you!
So were the sensors working when you got the device?
My S6 Edge had the same issue - all sensors would stop working (and the IR blaster) for a few days/weeks and then eventually they would work for a while again. In the end though, they stopped working completely. I also tried absolutely everything software related first but it turned out to be a fault with the mainboard. I sent it to Samsung who claimed it was caused by liquid damage and refused to repair it (I'm almost certain it wasn't liquid damage because I haven't got it wet) so ended up claiming on my insurance.
Sadly I didn't take the time to check the sensors before upgrading, so I have absolutely no idea about the sensors before I updated the system...
I saw some people talking about this kind of problems being liquid damage related, but I have no idea what happened to the phone before I got it...).
I hope I will be luckier than you were !
my sensors were working fine in 5.0 and then i officially upgrade my s6 to 6.0.1 and eventually all sensors died.
i make a factory reset and everything fine now
Just got my OP6 this week, have using for few days, generally very satisfied , except I'm frustrated with GPS performance.. GPS able to lock fast , when moving , it intermittently searching for GPS.. it's worst compare to OP5 and 3.. anyone experienced this , and any solution?
I have tried software GPS, it's lock very fast ,, but after that kept searching and lock again
New update.. just updated OS to 5.1.6 this morning.. seems like GPS lock is more stable.
Now I see 5.1.7 available, will try and report if this improve GPS
Hi all
Has anyone faced the following problem: my watch updated to the latest Wear OS a week ago. And after this all the sensors died - no any single of them is working.
I've googled and tried everything I can - from multiple factory resets and linking watch to another phones to manually enabling app permissions for sensonrs and dev mode.
Nothing worked. Test in Dev mode shows "Fail" for all tests related to sensors.
Any ideas/advice on how to fix this?
koladko said:
Hi all
Has anyone faced the following problem: my watch updated to the latest Wear OS a week ago. And after this all the sensors died - no any single of them is working.
I've googled and tried everything I can - from multiple factory resets and linking watch to another phones to manually enabling app permissions for sensonrs and dev mode.
Nothing worked. Test in Dev mode shows "Fail" for all tests related to sensors.
Any ideas/advice on how to fix this?
Click to expand...
Click to collapse
My Watch 2 sport (4G) got the same issue after 1 year. Sent it to service and got a replacement for free.
Probably a HW issue not related to the SW update....
rettinn said:
My Watch 2 sport (4G) got the same issue after 1 year. Sent it to service and got a replacement for free.
Probably a HW issue not related to the SW update....
Click to expand...
Click to collapse
THanks... My watch is more than 1 year old, AFAIK warranty is over
Anyway - Thanks for advice!
Got exacly the same situation, i got my hands on a LEO-BX9 BT, when i install the older firmware 7.1.1 at the start the steps appear and the heart rate works good, but then it starts making updates and loosing the sensors data, i dont believe it's HW related as lower versions of Android Wear work without a problem. already tried almost every firmware available on XDA and the only one that worked all sensors (briefly before auto update) was sawfish-OWDD.180215.018 can anyone give me some guidelines about this? i am well informed about flashing, rooting etc. but this is new to me. flashing fastboot rom and even that way not beeing able to use the sensors.
EDIT: i know this is a old thread but this is still a beautiful watch and with capabilities to perform as a daily driver.
i came from a mi band 4 looking for more functions even if it costs charging a watch every night.
Ultimate edit: it is definitly hardware, i opened up my watch, used isopropyl alchool to clean up all contacts and it worked again, all sensors are now working except barometric sensor, it seems it had been submerged more that it can handle by the previous owner so it had water damage on it, it is near the microphone and it is unrecoverable unfortunatly. but hey, now you know. if you are having error in heart sensor, acelerometer and such. opening up and cleaning the board and contacts its a good idea. time to open up the drawer and reviving a smartwatch!
dxtremez said:
Got exacly the same situation, i got my hands on a LEO-BX9 BT, when i install the older firmware 7.1.1 at the start the steps appear and the heart rate works good, but then it starts making updates and loosing the sensors data, i dont believe it's HW related as lower versions of Android Wear work without a problem. already tried almost every firmware available on XDA and the only one that worked all sensors (briefly before auto update) was sawfish-OWDD.180215.018 can anyone give me some guidelines about this? i am well informed about flashing, rooting etc. but this is new to me. flashing fastboot rom and even that way not beeing able to use the sensors.
EDIT: i know this is a old thread but this is still a beautiful watch and with capabilities to perform as a daily driver.
i came from a mi band 4 looking for more functions even if it costs charging a watch every night.
Ultimate edit: it is definitly hardware, i opened up my watch, used isopropyl alchool to clean up all contacts and it worked again, all sensors are now working except barometric sensor, it seems it had been submerged more that it can handle by the previous owner so it had water damage on it, it is near the microphone and it is unrecoverable unfortunatly. but hey, now you know. if you are having error in heart sensor, acelerometer and such. opening up and cleaning the board and contacts its a good idea. time to open up the drawer and reviving a smartwatch!
Click to expand...
Click to collapse
Thank you for your advice . I did exactly what you have mentioned and now my smartwatch is working again .
Hi everyone, I'm having what appears to be a chronic problem with the GameSir X2 pro, after a calibration of the triggers, the left trigger stopped working, and it appears to be a firmware issue and not a hardware issue, I'm desperate to fix this and I saw that MANY MORE PEOPLE are having the same problem! Has anyone here who has the gamepad gone through this and fixed it? Someone give me a light please
Same here mate, same. Reddit threads are also haunted by this issue. And to my surprise it started happening since last update only.
Mine is just 2month old.