My phone moto g turbo (xt1557) 6.0 stop functioning suddenly and display only Motorola logo so decided to flash it, the problem is that USB debugging is off, and to unlock bootloader i subscribe Motorola site and got the UNIQUE KEY. But I didn't Unlocked Bootloader its say "FAILED (remote failure) please help me. please help me. what should i do now ? is my phone will ok
soro_smart said:
My phone moto g turbo (xt1557) 6.0 stop functioning suddenly and display only Motorola logo so decided to flash it, the problem is that USB debugging is off, and to unlock bootloader i subscribe Motorola site and got the UNIQUE KEY. But I didn't Unlocked Bootloader its say "FAILED (remote failure) please help me. please help me. what should i do now ? is my phone will ok
Click to expand...
Click to collapse
Hi
---------- Post added at 07:09 AM ---------- Previous post was at 07:04 AM ----------
vinosree said:
Hi
Click to expand...
Click to collapse
Its not a big problem you do turn of your phone and then go to fastboot mode now connect to PC and open command promt then type it fastboot devices enter it will show your device serial number then do it successful if any doubts chat me .
Related
Hey guys, what's up?
I am having a problem with my moto G.
I tell you .. When I turn on the phone, goes directly into fastboot mode (press only on) .. And down I get the legend 'UTAG "bootmode" fastboot configured as' ..
Now, if I select Normal powerup in there, the phone starts without problems .. If I select recovery also goes there without problems ..
I mean that the only thing that happens is that the mobile is turned directly into fastboot mode .. and then select an option works normally.
Nor do I have problems to flash firmware or partitions using fastboot or mfastboot q .. tried everything I can think, I spent x number of firmwares and always the same.
I think .. I repeat, I THINK all started after flashing the GPE ..
I hope someone has information or any idea about it .. My mobile is xt1032
regards
ChristianB13 said:
Hey guys, what's up?
I am having a problem with my moto G.
I tell you .. When I turn on the phone, goes directly into fastboot mode (press only on) .. And down I get the legend 'UTAG "bootmode" fastboot configured as' ..
Now, if I select Normal powerup in there, the phone starts without problems .. If I select recovery also goes there without problems ..
I mean that the only thing that happens is that the mobile is turned directly into fastboot mode .. and then select an option works normally.
Nor do I have problems to flash firmware or partitions using fastboot or mfastboot q .. tried everything I can think, I spent x number of firmwares and always the same.
I think .. I repeat, I THINK all started after flashing the GPE ..
I hope someone has information or any idea about it .. My mobile is xt1032
regards
Click to expand...
Click to collapse
Solved ..
fastboot oem fb_mode_clear
Greetings.
help me
ChristianB13 said:
Solved ..
fastboot oem fb_mode_clear
Greetings.
Click to expand...
Click to collapse
hey pls help out i m trying to unroot my moto g nut after
unroot proses my phone getting Problem at startup is show only unlock warring pls help me out pls :crying:
nofear2430 said:
hey pls help out i m trying to unroot my moto g nut after
unroot proses my phone getting Problem at startup is show only unlock warring pls help me out pls :crying:
Click to expand...
Click to collapse
What is your problem exactly? Show me a picture, or tell me what good sucede.
And... what method did you use to unroot
ChristianB13 said:
What is your problem exactly? Show me a picture, or tell me what good sucede.
And... what method did you use to unroot
Click to expand...
Click to collapse
1st i root my moto g this method
http://forum.xda-developers.com/showthread.php?t=2684234
all is going well after root but ...
i decide to unroot phone
i use this method
http://forum.xda-developers.com/showthread.php?t=2542219
used tihs rom RETAIL-ASIA_FALCON_14.10.0Q3.X-84-7-LCG-2_cid7_CFC_1FF_SVC.xml
after that ahhhh only warning mgs cone after that nothing
this is image
http://tinypic.com/r/2wgf1aa/8
pls help out
i am new for this pls guide me
Hey xda,
I rooted my friends phone a couple of days ago and he also wanted me to install a rom on his phone. i downloaded the twrp app and installed it as the app said. the day after, the would not start up and just viewing an error: image signature verify fail. someone with same problem told me i had to unlock the bootloader and the problem would be solved. I unlocked the bootloader with an unlock code and fastboot. but now it doesn't start up either! when i hold the power button it sais ascend and then it turns black. the hardware buttons light up. if i look in fastboot it shows the bootloader is unlocked but I can't acces it. I can only go into the purple screen (download mode?) that blackscreen and i guess fastboot because i can see it if i type 'fastboot devices' in cmd window. I have tried to wipe all data with cmd by typing 'fastboot -w' but it still doesn't start up
I need help now because I don't want to buy my friend a new one. it's a huawei g510-0100.
A reply would be much appreciated.
thanks,
Lars
Hi, thank you fur using XDA Assist. You need to flash the stick firmware on your device. Unfortunately there's very little information about your device so if you don't know how to flash the stock firmware ask here,http://forum.xda-developers.com/showthread.php?t=2257421
Thread closed.
Hi,
my Moto G is recognized by my "Device Manager" as "QHSUSB_BULK".
Original Moto Drivers are installed. Last Version was a rooted stock Android 5.1 version.
I might need some help here guys...
Moto_G_Lucifer said:
Hi,
my Moto G is recognized by my "Device Manager" as "QHSUSB_BULK".
Original Moto Drivers are installed. Last Version was a rooted stock Android 5.1 version.
I might need some help here guys...
Click to expand...
Click to collapse
Is your phone getting power on???
no I cant enter fastboot neither can I start anything.
I did this: http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798
everything works until I run the blankflash.bat - there an error occurs:
FAILED (blank-flash:sdl-transfer-image:sdl-hello:invalid HDLC frame)
Moto_G_Lucifer said:
no I cant enter fastboot neither can I start anything.
I did this: http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798
everything works until I run the blankflash.bat - there an error occurs:
FAILED (blank-flash:sdl-transfer-image:sdl-hello:invalid HDLC frame)
Click to expand...
Click to collapse
Its hard bricked we all are waiting for 5.1 mbn-cn files now u to joined the group..
Aah crap *ironic high five* :highfive:
Thank you for your message!
Hi there,
I am attempting to fix a Moto G 2015 that belongs to a friend of mine. He told me that he attempted to root the phone, it got to 20% and it shut down. when he turned it on in fastboot mode it wouldn't let him do anything. I recently fixed a Moto G 2014 by unlocking the bootloader and flashing a stock android ROM onto it. I assumed I could do this to the Moto G 2015 but ADB is telling me that it cant because 'Allow OEM Unlock' is not checked off in Developer Options. Is there any way that I can turn it on even though I cannot access the settings?
Thanks in advance.
brian131 said:
Hi there,
I am attempting to fix a Moto G 2015 that belongs to a friend of mine. He told me that he attempted to root the phone, it got to 20% and it shut down. when he turned it on in fastboot mode it wouldn't let him do anything. I recently fixed a Moto G 2014 by unlocking the bootloader and flashing a stock android ROM onto it. I assumed I could do this to the Moto G 2015 but ADB is telling me that it cant because 'Allow OEM Unlock' is not checked off in Developer Options. Is there any way that I can turn it on even though I cannot access the settings?
Thanks in advance.
Click to expand...
Click to collapse
Hello,
There is no option as such. You need settings to turn on Allow oem unlock option. Can you access fastboot?
I dont think you need oem unlock option. You may visit here All in One guide on Moto G 2015 and read the entire thread thoroughly.
-Vatsal
Hai guys my brother have moto g 3 but it soft bricked stuck on bootloader so to flash stock firmware via fastboot mode it need to unlock bootloader but when i tries to unlock via commands its showing enable OEM unlock in developer option but moto G3 is not starting what to do?plz anyone help me..
Tanveer143 said:
Hai guys my brother have moto g 3 but it soft bricked stuck on bootloader so to flash stock firmware via fastboot mode it need to unlock bootloader but when i tries to unlock via commands its showing enable OEM unlock in developer option but moto G3 is not starting what to do?plz anyone help me..
Click to expand...
Click to collapse
And also usb debugging is not enabled in Developer option..
Enable USB debugging, and no need of Enabling UNLOCK bootloader if you are installing STOCK.. just properly flash every file as given in tutorial by dev: Lost
---------- Post added at 05:04 PM ---------- Previous post was at 05:02 PM ----------
@Tanveer143
---------- Post added at 05:06 PM ---------- Previous post was at 05:04 PM ----------
Change your TITLE properly,so that many people can understand what your problem is , by seeing it ..