Hai guys my brother have moto g 3 but it soft bricked stuck on bootloader so to flash stock firmware via fastboot mode it need to unlock bootloader but when i tries to unlock via commands its showing enable OEM unlock in developer option but moto G3 is not starting what to do?plz anyone help me..
Tanveer143 said:
Hai guys my brother have moto g 3 but it soft bricked stuck on bootloader so to flash stock firmware via fastboot mode it need to unlock bootloader but when i tries to unlock via commands its showing enable OEM unlock in developer option but moto G3 is not starting what to do?plz anyone help me..
Click to expand...
Click to collapse
And also usb debugging is not enabled in Developer option..
Enable USB debugging, and no need of Enabling UNLOCK bootloader if you are installing STOCK.. just properly flash every file as given in tutorial by dev: Lost
---------- Post added at 05:04 PM ---------- Previous post was at 05:02 PM ----------
@Tanveer143
---------- Post added at 05:06 PM ---------- Previous post was at 05:04 PM ----------
Change your TITLE properly,so that many people can understand what your problem is , by seeing it ..
Related
stucked at lg logo while flashing with resurrection guide....................plz plz plz help me
and plz give me v21e kdz file for 920 plz plz plz
Make sure you have the latest driver
Turn off the phone
Hold vol+ and plug into pc then follow these instructions
http://forum.xda-developers.com/showthread.php?t=2185925
---------- Post added at 08:46 PM ---------- Previous post was at 08:21 PM ----------
richard711 said:
Make sure you have the latest driver
Turn off the phone
Hold vol+ and plug into pc then follow these instructions
http://forum.xda-developers.com/showthread.php?t=2185925
Click to expand...
Click to collapse
This will work without a doubt
Here Download any Kdz you Want
http://lg-phone-firmware.com/index.php?id_mod=2
hello
Sorry my bad english
I'm trying to Unblock your bootloader my xperia E dual (c1605) i'm realize all the instructions contained in sony site when I press in cmd command "fastboot.exe" says this message <waiting for Device> infinitely
I perceive that I have a problem with the ABD interface look this photo attached
Can someone help me ?
Hai bud..
Why not use flashtool to unlock bootloader??
Cmd is actually a mess for beginners..
Thank me if I helped..
---------- Post added at 08:11 AM ---------- Previous post was at 08:10 AM ----------
So now,just install the adb drivers....
And retry..
Thank me if I helped you..
My phone moto g turbo (xt1557) 6.0 stop functioning suddenly and display only Motorola logo so decided to flash it, the problem is that USB debugging is off, and to unlock bootloader i subscribe Motorola site and got the UNIQUE KEY. But I didn't Unlocked Bootloader its say "FAILED (remote failure) please help me. please help me. what should i do now ? is my phone will ok
soro_smart said:
My phone moto g turbo (xt1557) 6.0 stop functioning suddenly and display only Motorola logo so decided to flash it, the problem is that USB debugging is off, and to unlock bootloader i subscribe Motorola site and got the UNIQUE KEY. But I didn't Unlocked Bootloader its say "FAILED (remote failure) please help me. please help me. what should i do now ? is my phone will ok
Click to expand...
Click to collapse
Hi
---------- Post added at 07:09 AM ---------- Previous post was at 07:04 AM ----------
vinosree said:
Hi
Click to expand...
Click to collapse
Its not a big problem you do turn of your phone and then go to fastboot mode now connect to PC and open command promt then type it fastboot devices enter it will show your device serial number then do it successful if any doubts chat me .
Hello everybody,
Can anybody help me further. I've been trying to install TWRP, since then I'm stuck in bootloop. The security warning is displayed briefly and then the display is black and the LED lights red. Or where do I recover the original recovery? The funny thing is that the emei shows me a P9 lite mini.
My build version: SLA-L22C432B132
Thanks in advance.
Can anyone help me?
budanzew said:
Can anyone help me?
Click to expand...
Click to collapse
Hi and welcome! Three months ago, I wrote a guide for a similar issue.
Try to take a look here.
Any question?
---------- Post added at 07:52 PM ---------- Previous post was at 07:27 PM ----------
If you don't want a newer build, you can download this, it's the B132 firmware. Just extract RECOVERY.img and flash it.
Huawei Y6 Pro 2017 firmware upgrade
Hi, B132 was released in August, it's very out of date.
I would heartily recommend installing the latest FullOTA-MF firmware build: SLA-L22C432B150
If dual-SIM, B150.
If single-SIM B151.
In order to recover Android properly, it's necessary to discover which build number is installed now on your phone. So please, turn off your phone. Plug your phone to a computer by a usb cable, then hold down simultaneously the volume down button and the power button, so that the FASTBOOT&RESCUE MODE can start on your phone. Then, on Windows, run a command prompt as administrator and move to the directory where there are fastboot and adb.
Now, type and enter the following command:
Code:
fastboot oem get-build-number
Then, please, post the returned result, thanks.
(bootloader) SLA-L22C432B132
OKAY [ 0.002s]
finished. total time: 0.002s
I have flash the B150 but the mobile doesnt boot. The Mobile starts i see the Huawei logo and than restart again.
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1923/g1650/v98998/f1/full/update.zip
Here you can find the B132, try with this, and after, boot into stock recovery and do a "Wipe Data/Factory reset" and a "wipe cache".
Ask me for doubts.
---------- Post added at 03:42 PM ---------- Previous post was at 02:56 PM ----------
It happened to me a couple of times few months ago. The device made 3 reboots and asked me for a factory reset.
Yours too?
---------- Post added at 03:57 PM ---------- Previous post was at 03:42 PM ----------
In your case, just to flash RECOVERY.img (of B132) would have been enough. But, if you've already flashed the B150, now you have to flash the full firmware B132 (BOOT, RECOVERY and SYSTEM).
@breathislava - You are the best! Thank you sooooooooo much <3
I am currently updating to B145. How can I root the phone? Can you help me with this as well?
greetz
budanzew said:
@breathislava - You are the best! Thank you sooooooooo much <3
I am currently updating to B145. How can I root the phone? Can you help me with this as well?
greetz
Click to expand...
Click to collapse
Here's to you! For questions about rooting, ask in the linked thread.
Hi. there are some way for port the sla-l02 (single sim) to SLA-L22 (dual sim), I try to flash the full firmware with adb (SLA-L22) but don't work, i need the dual sim work :l
Admin Edit: Guide removed due to reports of bricked devices.
OP has also requested account deltion.
Did you tried This method By YourSelf ?
Abdoubody said:
Did you tried This method By YourSelf ?
Click to expand...
Click to collapse
Yes
Candy_Pineapple said:
Yes
Click to expand...
Click to collapse
Could you Give me ScreenShots
i will leave my FB account in your PM to Contact each other
**** you my phone stuck on edl mode
---------- Post added at 11:34 PM ---------- Previous post was at 11:20 PM ----------
my phone bricked and its in the trash now dont follow this idiot
giga80 said:
**** you my phone stuck on edl mode
---------- Post added at 11:34 PM ---------- Previous post was at 11:20 PM ----------
my phone bricked and its in the trash now dont follow this idiot
Click to expand...
Click to collapse
Easy man. Let him post some proof, some screenshots or something. When you do something, it is always your responsability, always.
giga80 said:
**** you my phone stuck on edl mode
---------- Post added at 11:34 PM ---------- Previous post was at 11:20 PM ----------
my phone bricked and its in the trash now dont follow this idiot
Click to expand...
Click to collapse
If your are bricked it's your fault and flash with EDL mode doesn't reboot the phone automatically (you need to hold the power button for reboot) and Xiaomi warranty can repair your phone so calm down (Xiaomi repair my phone when I locked the bootloader of my phone after convertion)
@Candy_Pineapple Ty for taking the time to write this guide, but how about you post some screenshots of this along with your adapted guide from the A2 forum ? You cant just post something and say "it works" without giving us a proof. Also, is the MIUI10 based on Oreo or Pie ?
Candy_Pineapple said:
If your are bricked it's your fault and flash with EDL mode doesn't reboot the phone automatically (you need to hold the power button for reboot) and Xiaomi warranty can repair your phone so calm down (Xiaomi repair my phone when I locked the bootloader of my phone after convertion)
Click to expand...
Click to collapse
fastboot flashing unlock
fastboot flashing unlock_critical
i try and this command show faild.why can type this
Danvitayan said:
fastboot flashing unlock
fastboot flashing unlock_critical
i try and this command show faild.why can type this
Click to expand...
Click to collapse
Don't try trust me your device will be broken
giga80 said:
Don't try trust me your device will be broken
Click to expand...
Click to collapse
it broken
now when i flash stock rom through edl mode it success but auto reboot many time. help me
Guys No One try this Guide because i tired this Before anyone with A2 lite and phone broken
im who discovered the way to install MIUI on A2 only , No Way to A2 Lite Don't try
Abdoubody said:
Guys No One try this Guide because i tired this Before anyone with A2 lite and phone broken
im who discovered the way to install MIUI on A2 only , No Way to A2 Lite Don't try
Click to expand...
Click to collapse
can i fix it and re stock android one on mi a2 lite?? i tryed and my phone is brick now and when i flashed through EDL mode my phone restart very much time not stop
Danvitayan said:
it broken
now when i flash stock rom through edl mode it success but auto reboot many time. help me
Click to expand...
Click to collapse
i cannt even help myself, you help me ant tell me how you made your phone to be discoverd to the pc in the edl mode phone is broken and cant boot to any thing
giga80 said:
i cannt even help myself, you help me ant tell me how you made your phone to be discoverd to the pc in the edl mode phone is broken and cant boot to any thing
Click to expand...
Click to collapse
testpoint in mia2 lite.i try but auto restart
Danvitayan said:
testpoint in mia2 lite.i try but auto restart
Click to expand...
Click to collapse
so you opend the phone cover and removed the battery and follow this steps
giga80 said:
so you opend the phone cover and removed the battery and follow this steps
Click to expand...
Click to collapse
yes.but after remove battery my phone is restart many time.i think cap is dump but when i boot to twrp my phone is not restart so i think my software is issure
Danvitayan said:
yes.but after remove battery my phone is restart many time.i think cap is dump but when i boot to twrp my phone is not restart so i think my software is issure
Click to expand...
Click to collapse
i'v already opend my phone now but i dont know which point to connect i dont know the two dots to connect do you have any photo for that
---------- Post added at 12:35 PM ---------- Previous post was at 12:30 PM ----------
any help in test point please
giga80 said:
i'v already opend my phone now but i dont know which point to connect i dont know the two dots to connect do you have any photo for that
Click to expand...
Click to collapse
https://www.google.com/url?sa=i&sou...aw3wgZIMJ7b0AfFc-A2XJP_t&ust=1545129204896761
found it and flashing and tell you what i am up to