Galaxy S6 SM-G920F Marshmallow update failed. - Galaxy S6 Q&A, Help & Troubleshooting

My phone is a Galaxy S6 SM-G920F, I've just checked and noticed that there's a 6.0.1 update available for my phone. After downloading the update, there's a weird pop-up message saying: "Unable to install update. The downloaded file is invalid. Try again later." Are there any way I can fix this? Or do I have to update manually. Thank you!
P.S: My phone isn't rooted or modified in any way.

Try to download it again, reboot your phone and try again, I don't know maybe it will help
Sent from my SM-G920F using XDA-Developers mobile app

dsaklein said:
Try to download it again, reboot your phone and try again, I don't know maybe it will help
Sent from my SM-G920F using XDA-Developers mobile app
Click to expand...
Click to collapse
I've tried it but the same error pops up
Thank you anyway bro!

I don't know if this will help you. I am on Verizon and it worked for me. I kept getting a,download error. Instead of clicking on download now, I clicked on download later. The download started almost immediatly.
Sent from my SM-G920V using Tapatalk

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Getting the same thing. The update is about 17mb in size. It downloads, but right after it finishes, this message pops up. Really hoping to get some help with this. Thanks in advance!
Galaxy S6 SM-G920F
6.0.1
Sent from my SM-G920F using XDA-Developers mobile app

Try using Samsung Smart Switch on the PC. Worked for when I got the same error using OTA update method.

Is this a good guide to Update Galaxy S6 on marshmallow??
I have Samsung Galaxy S6 G925F and I want to update it on Marshmallow. I found the guide but little confused. Somebody helps me to guide about this.
---------- Post added at 06:58 PM ---------- Previous post was at 06:53 PM ----------
If you failed the process then you must restart your phone. But if still failed then repeat the process again.

hingchannnn said:
My phone is a Galaxy S6 SM-G920F, I've just checked and noticed that there's a 6.0.1 update available for my phone. After downloading the update, there's a weird pop-up message saying: "Unable to install update. The downloaded file is invalid. Try again later." Are there any way I can fix this? Or do I have to update manually. Thank you!
P.S: My phone isn't rooted or modified in any way.
Click to expand...
Click to collapse
dsaklein said:
Try to download it again, reboot your phone and try again, I don't know maybe it will help
Sent from my SM-G920F using XDA-Developers mobile app
Click to expand...
Click to collapse
Dalek75 said:
Try using Samsung Smart Switch on the PC. Worked for when I got the same error using OTA update method.
Click to expand...
Click to collapse
Faizan2478 said:
I have Samsung Galaxy S6 G925F and I want to update it on Marshmallow. I found the guide but little confused. Somebody helps me to guide about this.
---------- Post added at 06:58 PM ---------- Previous post was at 06:53 PM ----------
If you failed the process then you must restart your phone. But if still failed then repeat the process again.
Click to expand...
Click to collapse
Learn to use Odin. Download your specific firmware from [email protected] (On the download page) there's even a Youtube vid guiding you through the process of flashing your phone correctly.
As simple as that really! Screw OTA updates if you get errors - I never update using OTA. Hope this helps

Solution to Marshallow Offical OTA download problem.
I initally tried to update my Samsung S6 using the OTA update but after download got this error messege " invalid download file". I then downloaded Smart Switch from the Samsung website. I connected my phone to the PC and lauched Smart Switch. It notified me there was an update and I followed the instructions. At the end my phone reboot and I now have Marshallow 6.01 pn my Samsung S6. Please note my phone is locked to Virgin Mobile UK and is not rooted.
hingchannnn said:
I've tried it but the same error pops up
Thank you anyway bro!
Click to expand...
Click to collapse

Related

Problems upgrading?

I tried to upgrade OTA and got this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I then tried upgrading via kids, it downloaded the software and hung for a bit then crashed and just repeated this everytime I tried to upgrade. Anyone else had this problem and come up with a solution? Thanks
Sent from my GT-N8010 using xda premium
As per thousands of posts .
Server is busy try another time .
Solution wait or upgrade via KIES .
jje
Kies just crashes
Sent from my GT-N8010 using xda premium
try reinstalling kies to a previous version do not upgrade to new version even if ask you to
How do I do that? I upgraded to the new version before upgrading :/
Sent from my GT-I9000 using xda premium
Yes then the problem is with kies it happened to me once it asked me there was new version of kies available and installed it and after that kies kept crashing had the installer of previous version installed it and work fine again
http://www.filehippo.com/download_kies/
Hi 4 all!
I've tried to upgrade to Jelly Bean with Kies, but it didn't work. A friend who has the same model told me he managed to make the update, but for me doesn't work. I've tried to install an old version of Kies, and after that to make the update... I've tried to update Java, my windows is up to date, but nothing works. I don't know where to ask and above all this I'm a newbie in android, so I can't do tricks with my tablet... the only safe way to make the update is with Kies. Please anyone can help me?
Ok need some information before I can help you
What region does your tablet belongs to
What error are you getting while installing the OTA (Does it say new firmware is available)
Is you device on stock firmware if yes is the stock firmware the orignal one that that came with the device
samir_a said:
Ok need some information before I can help you
What region does your tablet belongs to
What error are you getting while installing the OTA (Does it say new firmware is available)
Is you device on stock firmware if yes is the stock firmware the orignal one that that came with the device
Click to expand...
Click to collapse
Hi, I'm so happy that someone answered to my message...I didn't expected this. As I wrote in my message I'm newbie in this, so be indulgent with me because I don't know the specific terms.
Now, my tablet is unbranded, untouched and I'm from Romania. After I've received my tablet on 23 of November,*I've installed Kies on my computer and a message appeared telling me there is a firmware update. I did the update, the little green guy appeared on my screen, but after restart I didn't seen any difference. Now Kies doesn't show any error or message. I tried to install a previous version of Kies and see if the update message appear, but without success. I don't want to make the update manually, because in my country the legislation about warranty is a little bit treacky and I don't have the proper knoleges to fight with the law if I alter the original software. I did the update via computer, because I don't have a WiFi connection to make it directly from the tablet.
I will attach 2 screenshots to see more detalies.
At the end of my message, I apologize for my rusty English, but this is not my native language. Tks in advance for your answer. :highfive:
I tried downgrading and it wouldn't let me update because it was a old version, I will try the link you posted though and see if thwtchas any difference
Sent from my GT-N8010 using xda premium
Nope still crashing after firmware download :/
Sent from my GT-I9000 using xda premium
Ok the update message you saw was for kies and not your firmware, as show in the kies window you firmware is upto date so do not panic the JB firmware is not out for your region let me check on Samfirmware and confirm it but will need some time as stepping out in a while.
There was problem with Kies in one of its version I do not know whether it is sorted out or not but when you upgrade and connect your note it use to crash if and only if you are having this problem downgrade kies otherwise do not
Please download Kies from this link
www.androidos.co.in/Firmwares/JB/Kies_2.5.0.12094_27_11.exe
Please uninstall the kies installed on your pc first and then install this
Hello thanks for the reply, it wouldn't update over the air when it was downloading so I just toke it back got it replaced and it updated fine
Sent from my GT-N8010 using xda premium
samir_a said:
Please download Kies from this link
www.androidos.co.in/Firmwares/JB/Kies_2.5.0.12094_27_11.exe
Please uninstall the kies installed on your pc first and then install this
Click to expand...
Click to collapse
Thank you! I too no matter what on TWO Note 10.1's Keys would never work. THIS ONE You posted did.. Thanks..
Figured this is a good spot to put the problems I have with upgrading.
Base story, I installed the 8010 German 4.1.1 on my Canadian 8010.
Current problem, I connected my tab to kies today to see if an upgrade was available. When I connected it all was good till I noticed something I hadn't noticed the last time I had connected it to kies even after the update, it's telling me that "Your devices is not eligible for update through kies" now I'm exactly sure what this means.
Ill post a screen shot as soon as I reset my computer(gotta get kies to recognize my device again...)

Sw rev check fail device 2 binary 1

Hello
I have note 5 n920t when I power it on it gets stucked on tmobile logo now when try to flash stock rom 5.1.1 tmobile I get the following err message as showed in the picture kindly help me with how to get rid of this to get my phone back to work
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Flash the latest version https://www.androidfilehost.com/?fid=24052804347822394 using ODIN
Bro I downloaded latest v .5.1.1 from sammobile tried that one but failed it's different the one u mentioned
tulipkhan said:
Bro I downloaded latest v .5.1.1 from sammobile tried that one but failed it's different the one u mentioned
Click to expand...
Click to collapse
You will need the PIT file as well when flashing in Odin for a full recover. Someone posted a link to it in one of the threads.
Found the Link - http://forum.xda-developers.com/note5/general/project-noble-firmware-pit-file-galaxy-t3179529
Listed is BOH6
Restore to it and upgrade again and you should be all set.
i have same of this problem
please help me
my device is :
N920C (Dual Sim)
Pooya500 said:
i have same of this problem
please help me
my device is :
N920C (Dual Sim)
Click to expand...
Click to collapse
i have same of this problem
please help me
my device is :
N910H
Toneman07 said:
You will need the PIT file as well when flashing in Odin for a full recover. Someone posted a link to it in one of the threads.
Found the Link - http://forum.xda-developers.com/note5/general/project-noble-firmware-pit-file-galaxy-t3179529
Listed is BOH6
Restore to it and upgrade again and you should be all set.
Click to expand...
Click to collapse
guys I dont understand whats the pit file for or how to use it, can somebody help?
dmen2a said:
guys I dont understand whats the pit file for or how to use it, can somebody help?
Click to expand...
Click to collapse
This phone model does not have a pit file. So you might wanna send it in for warranty. That other pit file listed was for a different version of note 5.
BAD ASS NOTE 5
tulipkhan said:
Hello
I have note 5 n920t when I power it on it gets stucked on tmobile logo now when try to flash stock rom 5.1.1 tmobile I get the following err message as showed in the picture kindly help me with how to get rid of this to get my phone back to work View attachment 3515533
Click to expand...
Click to collapse
Have you tried using Kies emergency recovery?
Yes but nothing work
Sent from my SM-N910C using Tapatalk
Odin flash the team win recovery. Then flash the stock rom.
---------- Post added at 09:23 PM ---------- Previous post was at 09:23 PM ----------
Both through Odin
---------- Post added at 09:28 PM ---------- Previous post was at 09:23 PM ----------
A factory reset or clearing data should be your last step.
been fighting this for a week. I can get it to boot but no sound except for calls.
TeamHackura said:
been fighting this for a week. I can get it to boot but no sound except for calls.
Click to expand...
Click to collapse
Is it rooted or running a custom rom?
Sent from my SM-N920T using Tapatalk
sw rev. check fail, device: 2, binary: 1, J200 como resolver ?
sw rev. check fail, device: 2, binary: 1, J200 como resolver ? ja tentei vários softwares diferentes e não sai desse erro.

Samsung Galaxy S7 EDGE SM-G935F | ROM + ROOT + TWRP + Drivers + Stock Firmware

ROM stock firmware Samsung Galaxy S7 SM-G935F update
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Deodex Marshmallow in Galaxy S7 Edge
How to deodex Android 6.0 on Galaxy S7 Edge ?
i have 5 files in my package which four should i use? there are two csc one has home and the other without home in label
ashdstin said:
i have 5 files in my package which four should i use? there are two csc one has home and the other without home in label
Click to expand...
Click to collapse
Use that one without home in label. And you don't need pit file, cause it is compiled inside csc file.
SM-G935F powered by Echoe
Coul you upload this
Version: G935FXXU1APC8/G935FOXX1APB1/G935FXXU1APBD/G935FXXU1APC8
OS: Marshmallow(Android 6.0.1)
I have downloaded the Vodafone firmware for s7 edge. The problem is that it has MultiLanguage CSC. I need italian setup but at the start it is in deutsch Language and so I can not use Volte with Vodafone Italy.
Dumb question probably, but is all this legit? Root and everything? I hear ROM development isn't as great on the Exynos chips, but coming from having an only rooted ATT S4, the international S7 would be real nice.
Guys what of the Samsung bloatware can I remove with titanium safely? Anyone knows?
Sent from my SM-G935F using Tapatalk
does anyone know if this variant works with verizon??
stang5litre said:
does anyone know if this variant works with verizon??
Click to expand...
Click to collapse
Sure doesn't.
lowrider82 said:
Guys what of the Samsung bloatware can I remove with titanium safely? Anyone knows?
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
You can remove ALL the Samsung and Google Bloatware from your handset safely... Cleared 500+ MB cleaning mine off after rooting using Uninstaller (root)
Sent from my SM-G935F using XDA-Developers mobile app
hy tank to all
after i put frimwere and download TWRP CF-Auto-Root SuperSU 2.70.zip
how can i use this could some one pute a easy guide o link pls so much
Be warned, downloading the UK firmware from that russian site installed a load of malware on my pc. I've just finished removing it, pain in the ass.
Whenever I try to flash TWRP, my phone says that it's FRP protected...
Odin fails due to that...
How to fix this? I google'd it and only guys fix this for money :/
EDIT:
FIXED IT! Go to developer settings -> enable DISABLE OEM LOCK
tuk1maar said:
Whenever I try to flash TWRP, my phone says that it's FRP protected...
Odin fails due to that...
How to fix this? I google'd it and only guys fix this for money :/
Click to expand...
Click to collapse
Enable OEM Unlock from developer options.
Can i Use this Root Method for SM-G935FD
Do not download anything from this crappy site,you'll get a ton of malware!!!!!
good job
---------- Post added at 09:59 PM ---------- Previous post was at 09:47 PM ----------
sriszone said:
Can i Use this Root Method for SM-G935FD
Click to expand...
Click to collapse
same question
SimplyCity said:
Use that one without home in label. And you don't need pit file, cause it is compiled inside csc file.
SM-G935F powered by Echoe
Click to expand...
Click to collapse
Btw, do you know what's the difference?
Raphy511 said:
Btw, do you know what's the difference?
Click to expand...
Click to collapse
Yes, CSC home WILL NOT format your data. That one without HOME will

How do I get Nougat on my Mate 8?

Been looking and trying to figure this out but there is so much info out there and none of it matches the other and I can't find anything for my build...
Here is what I have
Model: Huawei NXT-L29
Build: NXT-L29C636B320
I'm in the USA
Can anyone help me with the upgrading to Nougat?
Thanks!
Start here
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
yurdun said:
Been looking and trying to figure this out but there is so much info out there and none of it matches the other and I can't find anything for my build...
Here is what I have
Model: Huawei NXT-L29
Build: NXT-L29C636B320
I'm in the USA
Can anyone help me with the upgrading to Nougat?
Thanks!
Click to expand...
Click to collapse
First downgrade to B211. There is a guide that shows how to downgrade from EMUI 4.1 to 4.0. You can find the guide here. Once you've successfully downgraded to B211, B563 OTA should appear on your set in couple of days. I received mine immediately after downgrading to 211.
Well whatever I did messed it all up, now it just sits on the EMUI screen asking to reboot or wipe... then somehow i managed to get to Huawei eRecovery and it says "getting package info failed" so it looks like i ruined the phone... any ideas on fixing this?
3bdex said:
First downgrade to B211. There is a guide that shows how to downgrade from EMUI 4.1 to 4.0. You can find the guide here. Once you've successfully downgraded to B211, B563 OTA should appear on your set in couple of days. I received mine immediately after downgrading to 211.
Click to expand...
Click to collapse
What if I'm on b180?
Just upgrade to 211. A simple dload should do it.
---------- Post added at 07:04 PM ---------- Previous post was at 07:02 PM ----------
yurdun said:
Well whatever I did messed it all up, now it just sits on the EMUI screen asking to reboot or wipe... then somehow i managed to get to Huawei eRecovery and it says "getting package info failed" so it looks like i ruined the phone... any ideas on fixing this?
Click to expand...
Click to collapse
What were the steps you followed? At which point did you get stuck?
3bdex said:
First downgrade to B211. There is a guide that shows how to downgrade from EMUI 4.1 to 4.0. You can find the guide here. Once you've successfully downgraded to B211, B563 OTA should appear on your set in couple of days. I received mine immediately after downgrading to 211.
Click to expand...
Click to collapse
3bdex said:
Just upgrade to 211. A simple dload should do it.
---------- Post added at 07:04 PM ---------- Previous post was at 07:02 PM ----------
What were the steps you followed? At which point did you get stuck?
Click to expand...
Click to collapse
How do I get it? Been trying to do it through firmware finder with no luck.
Well now that my phone only goes to fastboot, my issue is that the drivers won't install properly. I installed HiSuite, and when I go into Fastboot, it tries to install drivers and gives me: Unknown USB Device (Device Descriptor Request Failed)... Sometimes the Android Bootloader Interface pops up in Device Manager with a ! Does anyone have the right drivers for a Mate 8? Maybe I can manually install them?
Finally got downgraded to 211. Now I just wait for the update naturally?
yurdun said:
Finally got downgraded to 211. Now I just wait for the update naturally?
Click to expand...
Click to collapse
sign in to HiCare app and check for update.

ROM support for Gear S3 Classic SM-R775A AT&T

I don't see any mention of his watch anywhere. Is there just no support for it? Thanks!
I have Firmware for Odin use... Stock and Combination Firmware...
Will check my HDs.. forgotten which one...
Classic LTE device from S3 series seems not sooo much popular...
Best Regards
It's a shame. It's a very nice watch
https://shell.boxwares.com/default.aspx?DeviceModel=SM-R775A&Type=All#fh5co-table
Combination firmware ... Tizen 3
Code:
COMBINATION-FT30_R775AUCU1BRB1.tar.md5
I have also:
Code:
COMBINATION-FTMA_R775AUCU1AQD1.tar.md5
This is Tizen 2.3
I have also Stock Firmware... but forgotten where... and Version.
Best Regards
adfree said:
https://shell.boxwares.com/default.aspx?DeviceModel=SM-R775A&Type=All#fh5co-table
Combination firmware ... Tizen 3
Code:
COMBINATION-FT30_R775AUCU1BRB1.tar.md5
I have also:
Code:
COMBINATION-FTMA_R775AUCU1AQD1.tar.md5
This is Tizen 2.3
I have also Stock Firmware... but forgotten where... and Version.
Best Regards
Click to expand...
Click to collapse
Hi @adfree can you share other link? for R775A
because the file not available in google drive (it says too many download/access to the file?)
TIA
@ajieboy
Can you try again... ignore text... press Download Button...
Post result...
Best Regards
adfree said:
@ajieboy
Can you try again... ignore text... press Download Button...
Post result...
Best Regards
Click to expand...
Click to collapse
Noted, thank you. I now can download it. It's the daily limitation problem that I experienced.
Sent from my iPhone using Tapatalk
@adfree i already installed the BRB1 firmware for R775A and the watch now can works after it stuck in boot logo (thank you)
but the watch now show "engineering mode" ( i don't know to describe it) with list of code in the face, even after i reset it.
how to have a normal mode in the watch ?
@ajieboy
Meanwhile problem solved?
I am very busy at the moment...
And my motivation to upload again is not at highest level...
No idea why US users not help each other...
I am from Germany... I have no LTE Gear S3...
Write me PM... if you still out of luck...
So I will search my HDDs...
Best Regards
@adfree before, it stuck in the samsung logo after rebooting.
After flash via netOdin using your uploaded firmware BRB1, it not stuck anymore at boot. But the watch is at test mode, as attached pic.
So i planned to flash again using latest firmware or working normal firmware.
If anybody can help to share the firmware, much appreciated
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-N960F using Tapatalk
I am also having the same problem with the "test mode".
What's the next step? Do I need to flash with another firmware?
adfree said:
https://shell.boxwares.com/default.aspx?DeviceModel=SM-R775A&Type=All#fh5co-table
Combination firmware ... Tizen 3
Code:
COMBINATION-FT30_R775AUCU1BRB1.tar.md5
I have also:
Code:
COMBINATION-FTMA_R775AUCU1AQD1.tar.md5
This is Tizen 2.3
I have also Stock Firmware... but forgotten where... and Version.
Best Regards
Click to expand...
Click to collapse
After downloading the combination firmware, the zip asked for a password. Can someone please provide me with the password? Thanks.
---------- Post added at 03:40 PM ---------- Previous post was at 03:10 PM ----------
otnos said:
After downloading the combination firmware, the zip asked for a password. Can someone please provide me with the password? Thanks.
Click to expand...
Click to collapse
Nevermind, I found a different download.
---------- Post added at 03:50 PM ---------- Previous post was at 03:40 PM ----------
ajieboy said:
@adfree before, it stuck in the samsung logo after rebooting.
After flash via netOdin using your uploaded firmware BRB1, it not stuck anymore at boot. But the watch is at test mode, as attached pic.
So i planned to flash again using latest firmware or working normal firmware.
If anybody can help to share the firmware, much appreciated View attachment 4649521View attachment 4649522
Sent from my SM-N960F using Tapatalk
Click to expand...
Click to collapse
@ajieboy Did you ever resolved this? I got the same thing after flashing the rom. Any advice?
This ROM is for factory testing purposes, it is not for watch operation. If you want to fix your watch, download the stock rom here:
https://forum.xda-developers.com/ge...iles-r775aucu1aqd4-plus-t3727652#post78601708
Yes the ROM for testing but it to show us that the watch not die or stuck in boot after install testing ROM, you can use official commercial ROM.

Categories

Resources