Related
Dear Sir
iam changing my phone sim 3times continue.
after that iam restarting my phone.
buy my phone hanged at samsung first screen,
after i am updating firm ware using odin.
but my phone not turn on.that is sucked at android factory reset window.
the error is cant unmount sdcard...etc
my phone model is samsung si9003
plz can you help me about my phone how to turn on as usual.
plz suggest me about upgrading.
or give any solution for me plz
phone help
dnchandana said:
Dear Sir
iam changing my phone sim 3times continue.
after that iam restarting my phone.
buy my phone hanged at samsung first screen,
after i am updating firm ware using odin.
but my phone not turn on.that is sucked at android factory reset window.
the error is cant unmount sdcard...etc
my phone model is samsung si9003
plz can you help me about my phone how to turn on as usual.
plz suggest me about upgrading.
or give any solution for me plz
Click to expand...
Click to collapse
It is very hard to understand what your exact problem is, I can suggest a Galaxy III for an upgrade. As far as your current phone...
I;m sure someone out there has had a problem close to yours, try YouTube and Google searching as well as educating yourself here (XDA) on anything related to your phone or similar problems.
You might find the info. you need in an unrelated post or video! Check your pins to see if they are worn or possibly broken (connections). Ensure that you are getting a clean and solid connection.
Good luck
hi Sir,
i have freelander pd10 3g tablet and have tried to make firmware upgrade using sp flash, and i got the green circle tells me that upgrade is completed. but the tablet never started up then, not responding at all no power up no charging no recovery mode, nothing at all, when i connect it to pc it keeps connecting and disconnecting without removing the cable.
i need your support please i heard alot about you and have seen issues that were solved by your instructions, help me please it is still new.
written on the board inside tablet yg_mg705d
it's 8 gb, 1 g ram, 2 sim cards, hdmi
waiting for you
Thank GOD
Dear All,
Since i had a problem and i tried to get these developers help without any result and they haven't responded at all, i started searching and praying to ALLAH till i got this Site : h**p://forum.etbuying.com/viewtopic.php?f=18&t=26
It solved my problem as simple as it is.//
Good luck for all:laugh:
HELP OR ASSIST PLEASE , :crying:
My device doesn't startup/boot since
Accidentally deleted some folder and files on Root directory
I try to Charge several times my Battery, also bought a new one.
But it doesn't fix, startup or boot my Device
-
The Reason is : I try to flash some Tweaks , on SuperCharger v6
Expecting for some Better result's on my device , but it only keeps my Battery Drain so fast .
I try to Remove the SuperCharger v6 but accidentally Deleted some Folders
Also i deleted , SuperChargerv6 File .
I didn't intentionally check those folders , i just mistouch and deleted some folder w/ files using Root Explorer on it ,
The folders is on Root directory ,
This is the name of Folder's : ( /dev & /system )
-
i can't be detected on ADB since my Driver is Unspecified
and it only shows " Qualcomm CDMA Technologies MSM "
And it installed or it turns to Human Interface Device "USB Input Device"
What should i do if it doesn't Detect my device when i try to type in adb : adb shell
no devices is showing
This is my device : Starmobile ICON
Specs :
Starmobile Icon Specifications
1.2GHz quad-core Qualcomm Snapdragon MSM8225Q processor
4.5-inch qHD (540x960) IPS capacitive dipslay, 245ppi
Multi-touch with Asahi Dragontrail Glass
350MHz Adreno 203 GPU
Android 4.1.2 (Jelly Bean)
1GB of RAM
4GB of Internal Storage
microSD card slot up 32GB
3G/HSPA (WCDMA 850/2100)
HSDPA 7.2mbps / HSUPA 5.76mbps
GSM 850/900/1800/1900 (Quad-band)
WiFi 802.11 b/g/n / WiFi Hotspot
microUSB v2.0 / Bluetooth
Li-Ion 1,800mAh Battery
Light / Proximity / Gravity Sensor
Iam begging for answer and helps :crying:
Actually this is my first time to post this kind of thread i hope someone could really help me with this
This is my only Phone i keep this a couple of months , but i can't afford to lose this my father will kick my ass and kill me if he will know this phone had this problem
Hi
Thanks for writing to us at XDA Assist. Well, you're in a bit (actually, a lot) of trouble here. By deleting /system you've completely erased your operating system, so there's absolutely no way your phone is going to boot no matter how many new batteries you put into it, there's no operating system for the phone to boot into. I need some more information please, does the device power on at all? Do you see a never-ending boot animation? Or are there absolutely no signs of life from the phone?
timmaaa said:
Hi
Thanks for writing to us at XDA Assist. Well, you're in a bit (actually, a lot) of trouble here. By deleting /system you've completely erased your operating system, so there's absolutely no way your phone is going to boot no matter how many new batteries you put into it, there's no operating system for the phone to boot into. I need some more information please, does the device power on at all? Do you see a never-ending boot animation? Or are there absolutely no signs of life from the phone?
Click to expand...
Click to collapse
Thank you so much for Response sir :crying:
Absolutely no Boot , No sign of anything . but when i try to put a new Battery on it , it boot for a couple of times :
Logo of Carrier after 4 tries of booting , coz iam hoping to boot in to Bootloader , stock recovery and trying if CWM still exist
It turns back to deadboot , and no startup no power , but still Detectable at my Desktop
My desktop is Windows 7 ultimate x64-bit Service pack 1 , is it possible or how can i forcely Flash system.ext4.tar or /system File on it ? and is it Okay or Possible to flash a Firmware that comes from another Model/Device that has same Specifications ?
i try to explore and search deep on any GSM or related to my problems ,
Try some " how to install driver of Qualcomm MSM8225Q , how to install qualcomm drivers , how to flash on ADB , but still no luck ..
Also on my Starmobile ICON , this is one of my Problem, is Where do i hell can i get this phone model FIRMWARE Thats what the tech told me " Only Stock Firmware is my Main Solution "
Please help me iam just a teenager , can't afford to buy a new one , and still hoping to revive my Phone
Anyway tnx again from your response sir :crying:
rekz100 said:
Thank you so much for Response sir :crying:
Absolutely no Boot , No sign of anything . but when i try to put a new Battery on it , it boot for a couple of times :
Logo of Carrier after 4 tries of booting , coz iam hoping to boot in to Bootloader , stock recovery and trying if CWM still exist
It turns back to deadboot , and no startup no power , but still Detectable at my Desktop
My desktop is Windows 7 ultimate x64-bit Service pack 1 , is it possible or how can i forcely Flash system.ext4.tar or /system File on it ? and is it Okay or Possible to flash a Firmware that comes from another Model/Device that has same Specifications ?
i try to explore and search deep on any GSM or related to my problems ,
Try some " how to install driver of Qualcomm MSM8225Q , how to install qualcomm drivers , how to flash on ADB , but still no luck ..
Also on my Starmobile ICON , this is one of my Problem, is Where do i hell can i get this phone model FIRMWARE Thats what the tech told me " Only Stock Firmware is my Main Solution "
Please help me iam just a teenager , can't afford to buy a new one , and still hoping to revive my Phone
Anyway tnx again from your response sir :crying:
Click to expand...
Click to collapse
Unfortunately I can't find any stock firmware for your device anywhere so your options are pretty limited. You can try asking your question here:
Android Q&A, Help & Troubleshooting
If you're unable to get help there then I think your only option is to take the device to a service centre and have it inspected by professionals.
timmaaa said:
Unfortunately I can't find any stock firmware for your device anywhere so your options are pretty limited. You can try asking your question here:
Android Q&A, Help & Troubleshooting
If you're unable to get help there then I think your only option is to take the device to a service centre and have it inspected by professionals.
Click to expand...
Click to collapse
By the way tnx again :crying: :crying: :crying: :crying: :crying:
Thread closed, thanks.
Hi everyone.
First sorry my poor english.
Yesterday I received a phone (LG L4 II E467F Dual SIM) from a customer, the unit was but connecting the loading stopped with the LG logo and stand on this screen. I tried to upgrade the PC Suite, the cell was placed in download mode and the update is performed by the software, download and recording was carried out on the device during the recording process progress was up to 94% with the power on, when he got 95% the device was turned off automatically (A device's battery was at about 70% during the process), then the process has reached 100% normally without error messages.
After this the phone turned a brick, does not care, does not vibrate, does not go into download mode, finally does nothing. But noticed that it was shown in Windows Device list without driver. I used a software to install drivers and the device driver has been installed and he was recognized as "USB Port MTK (COM5)."
I watched a few topics about it, but could not properly understand the procedure and I was afraid to end any device recovery chance.
http://forum.xda-developers.com/showthread.php?t=1943442
http://forum.xda-developers.com/showthread.php?t=2160490
http://forum.xda-developers.com/showthread.php?t=1943442&page=91
https://www.youtube.com/watch?v=TQvdJwvqKZ4
Does anyone know how I can recover the bootloader of the device?
The bootloader is my biggest concern, because if the device start and stop again with LG logo can at least return the device to the customer.
rodrigocswm said:
Hi everyone.
First sorry my poor english.
Yesterday I received a phone (LG L4 II E467F Dual SIM) from a customer, the unit was but connecting the loading stopped with the LG logo and stand on this screen. I tried to upgrade the PC Suite, the cell was placed in download mode and the update is performed by the software, download and recording was carried out on the device during the recording process progress was up to 94% with the power on, when he got 95% the device was turned off automatically (A device's battery was at about 70% during the process), then the process has reached 100% normally without error messages.
After this the phone turned a brick, does not care, does not vibrate, does not go into download mode, finally does nothing. But noticed that it was shown in Windows Device list without driver. I used a software to install drivers and the device driver has been installed and he was recognized as "USB Port MTK (COM5)."
I watched a few topics about it, but could not properly understand the procedure and I was afraid to end any device recovery chance.
http://forum.xda-developers.com/showthread.php?t=1943442
http://forum.xda-developers.com/showthread.php?t=2160490
http://forum.xda-developers.com/showthread.php?t=1943442&page=91
https://www.youtube.com/watch?v=TQvdJwvqKZ4
Does anyone know how I can recover the bootloader of the device?
The bootloader is my biggest concern, because if the device start and stop again with LG logo can at least return the device to the customer.
Click to expand...
Click to collapse
Sorry, I wrote hard brick in the title, but actually just learned the real difference between soft brick and hard brick, and my problem is soft brick
Hi, thank you for using XDA Assist. The purpose of XDA Assist is to point you in the right direction, it's not a help desk. See this, http://forum.xda-developers.com/showthread.php?t=2764768. Since your looking in the right place to get your question answered I'm going to close this thread.
Hi
I updated my Phone today using an SD card from the zte website. All was going well and then the screen went off and now I can't start the phone. I have tried a hard reset but it's dead!
Any ideas? Gutted as it's almost new!
Please help if you can.
Cheers
adamfoulkes said:
Hi
I updated my Phone today using an SD card from the zte website. All was going well and then the screen went off and now I can't start the phone. I have tried a hard reset but it's dead!
Any ideas? Gutted as it's almost new!
Please help if you can.
Cheers
Click to expand...
Click to collapse
I have the same problem, did you find a solution?
cheers
Hi
I'm in the same situation, someone has a solution
Help
Me 2.
Help pls.
:crying:
Does it turn on but gets stuck while boot or it doesn't turn on at all?
Sent from my GT-S7262 using Tapatalk
Tali099 said:
Does it turn on but gets stuck while boot or it doesn't turn on at all?
Sent from my GT-S7262 using Tapatalk
Click to expand...
Click to collapse
Hi Tali099 and sorry for my terrible English.
No boot log and only black screen.
Absolutely dead !!!
when connected to pc, find the mobile as: qhsusb_bulk qualcomm 9008 com5.
I had try to unbrick it but unfortunately i didn't find any way to unbrick the chipset: Qualcomm MSM8939 Snapdragon 615 who have the zte blade s6.
Very deep hard brick. :crying:
Have you any idea how to unbrick it ???
I'm the same situation that you.
gining said:
Hi Tali099 and sorry for my terrible English.
No boot log and only black screen.
Absolutely dead !!!
when connected to pc, find the mobile as: qhsusb_bulk qualcomm 9008 com5.
I had try to unbrick it but unfortunately i didn't find any way to unbrick the chipset: Qualcomm MSM8939 Snapdragon 615 who have the zte blade s6.
Very deep hard brick. :crying:
Have you any idea how to unbrick it ???
Click to expand...
Click to collapse
I'm the same situation that you. I need several files for unbrick our phone but I don't found it. I have follow this tutorial: htcmania.com/showthread.php?t=924041
jjcc1999 said:
I'm the same situation that you. I need several files for unbrick our phone but I don't found it. I have follow this tutorial: htcmania.com/showthread.php?t=924041
Click to expand...
Click to collapse
I tried and this way but the "color" was only finds the com port and nothing else. Searching, I found for the "color" is only for chipset Msm8974 and not for ours chipset msm8939. We must look to find the way for unbrick our chipset (msm8939). unfortunately nothing i found as now.
If I can not do anything in the next few days, i will defamation the ZTE in all forums because our problem started from the ZTE proposal to upgrade our mobile with the new version.
gining said:
I tried and this way but the "color" was only finds the com port and nothing else. Searching, I found for the "color" is only for chipset Msm8974 and not for ours chipset msm8939. We must look to find the way for unbrick our chipset (msm8939). unfortunately nothing i found as now.
If I can not do anything in the next few days, i will defamation the ZTE in all forums because our problem started from the ZTE proposal to upgrade our mobile with the new version.
Click to expand...
Click to collapse
I agree with you because the web does not put any warning that may happen or specification in this regard.
Hi
I updated my Phone today using an SD card from the zte website. All was going well and then the screen went off and now I can't start the phone. I have tried a hard reset but it's dead!
Any ideas? Gutted as it's almost new!
Please help if you can.
Cheers
I have exactly the same situation after an official upgrade via SD card..
Black screen will not power on only shows blue light when connected to a charger or laptop.
I have been waiting for over two weeks now for ZTE to provide a solution, nothing, all I get is we are looking into it..
Terrible service and certainly won't be buying any ZTE again
Guys so we are really dead, there is nothing to be done about this problem ? Is this hard-brick ? Any solution here ????
same here
my phone brick after repartition this dump phone
i forget to search that file first..
Please help me s6 was brick [email protected]
reply from ZTE
Hello,
I have been backwards and forwards with ZTE to get this problem resoved and still not sorted. They did send me some instructions of how to reset the device but it needs a piece of software to be able to do this and ZTE won't give it to me to try it out!!!!
I would upload it on here but it seems I am not allowed to or cannot find out how to do it.
This is so frustating!
I got the same problem (black screen) when after rooting and different experiment I tried to put the original ROM back which I downloaded from needrom. After 3 days of continuous searching, I concluded that I have damaged the eMMC Partition by installing a different firmware that was not suitable for my Europe version of Mobile.
This link was quite helpful to understand the problem.
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
To solve this problem first I need the 8939_msimage.mbn of Qualcomm 615 and related files. The other option is to use the service ROM and ZTE TOOL STUDIO, I am unable to find this ROM and other files to repair bootloader. If someone with working ZTE blade s6 or other Qualcomm 615 chipset phone can provide this, it would be really helpful.
Following files are required at least from a Qualcomm 615 MSM8939 Chipset.
8939_msimage.mbn
MPRG8939.mbn
patch0.xml
sahara.xml
rawprogram0.xml
Hello all, I have the same problem with my phone except that when it boot , it freezes on " ZTE screen" . What can I do ?
magicfab38 said:
Hello all, I have the same problem with my phone except that when it boot , it freezes on " ZTE screen" . What can I do ?
Click to expand...
Click to collapse
You can enter recovery mode Power On pressing volume up key.
Try "wipe cache partion" at first and if S6 still doesn't boot up, try next "wipe data/factory reset".
If both measures doesn't work, your system has damage from unknown reason.What change did you it?
I have the same problem
:crying:
adamfoulkes said:
Hi
I updated my Phone today using an SD card from the zte website. All was going well and then the screen went off and now I can't start the phone. I have tried a hard reset but it's dead!
Any ideas? Gutted as it's almost new!
Please help if you can.
Cheers
Click to expand...
Click to collapse
adamfoulkes said:
Hi
I updated my Phone today using an SD card from the zte website. All was going well and then the screen went off and now I can't start the phone. I have tried a hard reset but it's dead!
Any ideas? Gutted as it's almost new!
Please help if you can.
Cheers
Click to expand...
Click to collapse
Did you find a solution ?
---------- Post added at 07:32 PM ---------- Previous post was at 07:17 PM ----------
safderali5 said:
I got the same problem (black screen) when after rooting and different experiment I tried to put the original ROM back which I downloaded from needrom. After 3 days of continuous searching, I concluded that I have damaged the eMMC Partition by installing a different firmware that was not suitable for my Europe version of Mobile.
This link was quite helpful to understand the problem.
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
To solve this problem first I need the 8939_msimage.mbn of Qualcomm 615 and related files. The other option is to use the service ROM and ZTE TOOL STUDIO, I am unable to find this ROM and other files to repair bootloader. If someone with working ZTE blade s6 or other Qualcomm 615 chipset phone can provide this, it would be really helpful.
Following files are required at least from a Qualcomm 615 MSM8939 Chipset.
8939_msimage.mbn
MPRG8939.mbn
patch0.xml
sahara.xml
rawprogram0.xml
Click to expand...
Click to collapse
Hi bro did you find a solution to unbrick the zte blade s6 ?