hi Sir,
i have freelander pd10 3g tablet and have tried to make firmware upgrade using sp flash, and i got the green circle tells me that upgrade is completed. but the tablet never started up then, not responding at all no power up no charging no recovery mode, nothing at all, when i connect it to pc it keeps connecting and disconnecting without removing the cable.
i need your support please i heard alot about you and have seen issues that were solved by your instructions, help me please it is still new.
written on the board inside tablet yg_mg705d
it's 8 gb, 1 g ram, 2 sim cards, hdmi
waiting for you
Thank GOD
Dear All,
Since i had a problem and i tried to get these developers help without any result and they haven't responded at all, i started searching and praying to ALLAH till i got this Site : h**p://forum.etbuying.com/viewtopic.php?f=18&t=26
It solved my problem as simple as it is.//
Good luck for all:laugh:
Related
Hi guys i really need help with this issue
I have a viewsonic 10s that was working on a modded rom for over 4 months , i read up on the vegacomb rom and decided to install it, install went fine , rebooted and rom seamed to work , after switching it off and on the following morning i cant get teh rom to load and more worrying is i now cant get to the recover screen .
the unit is currently stuck ina loop , shows install screen again and then the vengacomb logo but no futher
i have a youtube video showing this but am unable to post it at this time as ii am new to the forum, you can simply search my youtube user gohanni to view please please please help..........
still on going
the issue has been still on going, an after many attemptd to put the original firm ware back on i have discovered that teh usb driver that did work originaly to attempt to put the honey comb image on now shows in device manager as having 2 unknowen devices that appear when i connect the tablet via usb .
cdc serial
shuttle
both of these have esclamation marks, tried to auto update driver to no avail.
guys and girls really need some help
please search user gohanni on youtube for a short video showing the issue
hey guys
still no further any one have an idea what i have done and how to reverse it
????????
Hi, I have a big problem with my new Phone Feiteng H7100! After I flashed the ROM (from needrom), nothing happens on the phone! Everything went as described until the green circle. Nothing now … when connected to the PC appears a USB / network device name: Alcatel Single RNDIS interface, nothing more happens.
Can someone help me here? Please
jemmars
Hello everyone,
can anyone help me here really? I've also, quite diligently search through the forums for possible solutions, but I have not found anything. Please, please help me with my phone ... where I still have birthday ... your help I would be today's greatest gift!
Did you tried to reflash with another ROM?
Maybe this will help you: http://forum.xda-developers.com/showthread.php?t=2186116
Please post your experience.
hi, can anyone help me, i have a feiteng h7100, totally bricked, not turn it on, the computer dont recognize, is a dead phone, i flash it with sp flashtool first time says ok, but no turn it on, so i flash it again, in the middle of flashing says error and the cpu dont recognize any more my phone, any ideas..
never flash DSP_BL and preloader. as long as the device is recognized on your PC, its not "dead" othewise you can try the "testpoint" methode, but not all motherboards have one.
Hi folks,
I recently bought a Thunderbird i5 dual core - mtk6577 at cect-shop.com .
As far as good, dumb as I am, I tried to flash a pure android rom of colonelzap.
Since then, the phone is completely gone. The screen is dead and I can't hear anything, that the phone is booting. When I push the power button and the phone is connected to my pc, I can see, that the usb vcom drivers are loaded properly. So I guess its still possible to flash a correct rom.
I contacted the cect-shop.com team last week and the advised me to open up a thread at chinamobiles.org - sadly no appropriate answers yet.
Does anybody have a stock or custom rom, which is supported by the Thunderbird i5?
Or better said, is someone able to help a damn noob to unbrick the phone and to bring it back to life?
I appreciate any hints.
Thanks,
Maik
I have exactly the same phone and the same problem. Can anyone help please ?
hello
geminikish said:
I have exactly the same phone and the same problem. Can anyone help please ?
Click to expand...
Click to collapse
i have samme problem i flash from this link tutorial http://forum.xda-developers.com/showthread.php?t=2239861 but i bricket my thunderbird i5 mtk6577 because my laptop turn of on the proces of 50% of the flash but i have one idea i think i must remove the battery from board and insert again like mayandjay on youtube hi cut the 2 cables the red and the black try this way and then put it again and start to flash from begining
:good: Hello to all!!! :good:
For years, I read a post on xda and I'm very excited to write here ...... :crying::crying::crying:
---- I start with him to apologize for my English, I'm italian and i used google translator ---
I have this tablet:
TREKSTOR SURFTAB Ventos 7.0 (M.no. ST70208-2).
Unfortunately for some reason ( I have not figured out how ) does not start anymore.
No signs of life, has died.
It has no LED that alerts you when the tablet is turned on, until a few days ago I thought that the battery was dead.
Connecting it to my pc (win7) I noticed that the device is detected as "M6-CHIP"
On Google I found the drivers AML BURNING TOOLS and installed them
I'm trying to reinstall the firmware from the official site but unfortunately there is no firmware for this tablet.
Can you help? Parts in any way
P.S. is no longer under warranty
Other info
I tried using AML BURNING but without success. I do not know where to start.
Unfortunately I can not even load a firmware update via sd card why do not you turn on the display. I can not go into recovery mode.
Hello Guys
So i recently purchased a samsung tablet (gt-n8013) it was working fine, i put it to charged came back from work and it wouldn't bootup ,it stuck at the samsung logo..I checked online (google and youtube) and it seems like a common issue with that tablet (thank you samsung), i tried almost everything, hard reset, root the tablet and nothing seems to be working. I also noticed my laptop doesn't recognized the device after i download the latest firmware from samsung,i tried different softwares like Odin or kies none of them wouldn't recognized the device, so it was impossible to root my tablet..i bought a new usb cable and tried the same steps on a different pc still nothing...Its been two weeks now still not working and i don't know what else to do, if anyone ran to the same problem and knows how to fix it ,could you kindly help me resolve this issue or point me out to the right direction PLEASE!!!..Thank you.
Hi, first, please don't make duplicate threads, http://forum.xda-developers.com/postings.php?t=3131512&pollid= We do this on our free time and sometimes it takes us awhile to respond
Your best bet is to ask for help in your device's forum here, http://forum.xda-developers.com/galaxy-note-10-1. But sometimes device's just die. Odin is your best chance to get it working again. With your device booted into download mode and connected to your pc does device manager show anything? Maybe an icon with a yellow exclamation mark.
Thread closed.