Related
http://product.madeinchina.com/wholesale-product-image/I9300-S3-MTK6577-Android-4-0-OS-3G-4-6-FWVGA_14003970.shtml
i have the phone of the above link. i bought this phone I9300 (S3) MTK6577 Android 4.0 OS 3G 4.6 'FWVGA Screen GPS with microsim slot and after i restore to factory defaults i lost imei.I couldnt recover imei and then i tried to flash a new rom with flashtool.Now phone dosn't boot and screen is dead ,only red led is on and the led of buttons.
Maybe something wrong with the preloader and the rom i flashed.What can i do? do you have a new rom to flash with flashtool?Can you send me instructions how to unbrick this phone?Can you send a link of rom to flash and also a flashtool for it?Does anybody have the same phone that can upload the back up of his rom?
i have attached also a photo so you recognise the model of the phone which takes microsim
You can find this phone also here..
http://product.madeinchina.com/I9300-S3-MTK6577-Android-4-0-OS-3G-4-6-39-FWVGA-Screen-GPS-Wifi-Smart-cell-phone-FREE-SHIPPING-_14003970.shtml#ask
and here
http://forum.china-iphone.ru/viewtopic.php?f=70&t=24648&p=905244#p905244
Hope somebody have the same phone to help because now its bricked!
http://www.youtube.com/watch?v=CZ35mOvRpm4 Procedure on how to get the firmware use version 3 universal firmware across all MT657X chipsets. (January 2013)
http://forum.xda-developers.com/showthread.php?t=1982587 use this SP flash tool!.
http://www.chinaecarts.com/samsung-...nch-mtk6577-android-41-16gb-phone-p-3095.html firmwares are on this page. check what type of S3 clone you have... (I have a 99 percent replica)
I have reflashed a S3 clone using this method. I'll create a comprehensive guide if I have the time.
All i'm asking is hit the Thanks button if this helped you
problem loading
i downloaded the version micro_sim_s3_quadcore_dualcore_firmware_20130107 and when i try to flash it with sp flash tool i get the error that the phone is mtk6577 and the file is for 6575.Look the photo i have attached and let me know.
Do i do something wrong?
Beer Brand said:
http://www.youtube.com/watch?v=CZ35mOvRpm4 Procedure on how to get the firmware use version 3 universal firmware across all MT657X chipsets. (January 2013)
http://forum.xda-developers.com/showthread.php?t=1982587 use this SP flash tool!.
http://www.chinaecarts.com/samsung-...nch-mtk6577-android-41-16gb-phone-p-3095.html firmwares are on this page. check what type of S3 clone you have... (I have a 99 percent replica)
I have reflashed a S3 clone using this method. I'll create a comprehensive guide if I have the time.
All i'm asking is hit the Thanks button if this helped you
Click to expand...
Click to collapse
try version 3 first the universal one. then you can play with the others by updating through stock recovery. i bet you have a dual core one. press vol down , ok and power button at the same time on boot and go to version. if it says MAUI on the list then we have the same clone
Sent from my Nokia 5110 using Tapsilog and Kape
Beer Brand said:
try version 3 first the universal one. then you can play with the others by updating through stock recovery. i bet you have a dual core one. press vol down , ok and power button at the same time on boot and go to version. if it says MAUI on the list then we have the same clone
Sent from my Nokia 5110 using Tapsilog and Kape
Click to expand...
Click to collapse
Do you mean the one called ''micro_sim_s3_quadcore_dualcore_firmware_20130107'' ?
I tried to flash with sp flash tool but i get error!Not compatible!When it flashes i get error ''the target platform is 6577s00''
I cant load it!
Why do you mean by saying universal?
https://docs.google.com/open?id=0B4AdByfaH4T0TjVjc2w0OXVqQUE
try this link this goes to all mtk657x chipsets.
Sent from my Nokia 5110 using Tapsilog and Kape
i already said!i have downloaded but i cant load it on phone i get error see my previous post!\Look post 3 of this thread please LOOK the photo and let me know what wrong!?
soulfreem said:
i already said!i have downloaded but i cant load it on phone i get error see my previous post!\Look post 3 of this thread please LOOK the photo and let me know what wrong!?
Click to expand...
Click to collapse
Try to read the chinacarts website because you download the one for quadcore micro_sim_s3_quadcore_dualcore_firmware_20130107 the link i provided you is the the one that worked for me.
Version 3:
For micro sim version
(When you make upgrade the phone success,the boot screen will start on"welcome"logo,dial"*#2013#"or"*#0825#" then press"OK" reboot the phone,the boot logo will changed to Samsung Logo)
Firmware( Released on 07,Jan,2013) this firmware universal for MT6575,MT6577,MT6589 CPU:https://docs.google.com/open?id=0B4AdByfaH4T0TjVjc2w0OXVqQUE
Now mind your manners and be thankful and READ! we are not obliged to help out. Did you tried out this UNIVERSAL FIRMWARE! if you do then it never worked then there is nothing we can do to your expensive paperweight.
s3 clone
can this fix my s3 clone mtk6577?
Beer Brand said:
Try to read the chinacarts website because you download the one for quadcore micro_sim_s3_quadcore_dualcore_firmware_20130107 the link i provided you is the the one that worked for me.
Version 3:
For micro sim version
(When you make upgrade the phone success,the boot screen will start on"welcome"logo,dial"*#2013#"or"*#0825#" then press"OK" reboot the phone,the boot logo will changed to Samsung Logo)
Firmware( Released on 07,Jan,2013) this firmware universal for MT6575,MT6577,MT6589 CPU:https://docs.google.com/open?id=0B4AdByfaH4T0TjVjc2w0OXVqQUE
Now mind your manners and be thankful and READ! we are not obliged to help out. Did you tried out this UNIVERSAL FIRMWARE! if you do then it never worked then there is nothing we can do to your expensive paperweight.
Click to expand...
Click to collapse
Is the link the same for the quadcore and dualcore?
Thank you for your help
zeldaaxe1 said:
can this fix my s3 clone mtk6577?
Click to expand...
Click to collapse
i also have issue with my s3 clone mtk6577... its no longer turning on after trying to odex it.. tried to flash the firmware and thats when the phone no longer turning on.. please help me.. im trying to flash it again using the flash tool but stuck in 0% what do i need to do?
I have the same problem. S3 micro sim clone MTK6589, new firmware tried (chinaecarts.com/s3firmware20130320.rar ), then the phone not booting.
I just contacted with Chinaecarts.com, they tried to solve the problem but not working.
Also tried with the universal firmware, but it sad I've MTK6577 phone, not MTK6575.
If I will have fresh news, will post it.
(seller said, I should send the phone back, and they will fix it.)
I tried with this:
H.tps://docs.google.com/open?id=0B4AdByfaH4T0TjVjc2w0OXVqQUE
It is theoretically for the MTK6577 and MTK6589 as well. Got the previous result: "Platform error. The target platform is MT6577_S00."
I think there is a solution for the blank screen problem:
- need a Flash Tool. (on the link above you can find it, or on the link in my previous post)
- need a firmware for MTK6577 micro sim card.
I tried with many sdcard firmware versions, but no effective result.
Hi,
1, You need to know what is exact model of your s3 mtk6577. There are many s3 mtk6577 models in the market. Different s3 mtk6577 is made by different manufacturer, so the ROM is definitely different.
2. After you get the right ROM, then flash your phone by using flash tool SPMultiPortFlashDownloadProject
Bricked MTK6577
The image of the S3-micro-sim-version-20121210 this with corronpidos files, and the method that you should have done to retrieve your appliance was using the recover instead of SP tools because the files are not in rar. SP standard my phone so can enter META mode and nothing more.
soulfreem said:
http://product.madeinchina.com/wholesale-product-image/I9300-S3-MTK6577-Android-4-0-OS-3G-4-6-FWVGA_14003970.shtml
i have the phone of the above link. i bought this phone I9300 (S3) MTK6577 Android 4.0 OS 3G 4.6 'FWVGA Screen GPS with microsim slot and after i restore to factory defaults i lost imei.I couldnt recover imei and then i tried to flash a new rom with flashtool.Now phone dosn't boot and screen is dead ,only red led is on and the led of buttons.
Maybe something wrong with the preloader and the rom i flashed.What can i do? do you have a new rom to flash with flashtool?Can you send me instructions how to unbrick this phone?Can you send a link of rom to flash and also a flashtool for it?Does anybody have the same phone that can upload the back up of his rom?
i have attached also a photo so you recognise the model of the phone which takes microsim
You can find this phone also here..
http://product.madeinchina.com/I9300-S3-MTK6577-Android-4-0-OS-3G-4-6-39-FWVGA-Screen-GPS-Wifi-Smart-cell-phone-FREE-SHIPPING-_14003970.shtml#ask
and here
http://forum.china-iphone.ru/viewtopic.php?f=70&t=24648&p=905244#p905244
Hope somebody have the same phone to help because now its bricked!
Click to expand...
Click to collapse
It looks I have the exact model of yours. I am trying to update the firmware by entering the recovery (I suppose it is {vol up + power}). But my external sdcard is not mounted to pick the rom from.
I hope this may help you? I had the same problems as you with the same phone after rooting it I deleted the original rom as it went into a loop and would not start so I started installing every firmware I can find and install, I got one which works BUT! no English , it boots English then goes into several languages but not English it is HDCI9300 rom. I googled it as no one seems able or do not want to help although I have asked several times in many different ways. I hope this will get your phone at least to boot up, I used sp flash as this rom will not let you do anything with the sd card (if it does you need to translate one of the languages)? I hope this helps, if not you have lost nothing:fingers-crossed:
Hello. I have a similar problem with yours. A friend of mine has a 100% visual clone (MTK6577) with the same sticker under the battery like in the first post, he tried to flash it, but he messed up something, and then he brought it to me completely DEAD . No charging, no PC connection - nothing... I tried many button combos, and accidentally i found out that if i connect the phone without battery, press and hold VOL+, VOL- & POWER for a few seconds, the PC detected the mediatek com port , installed the drivers without problem, and now the real problems begins - the ROM. I tried all of the roms from chinaecarts but without success, first i couldn't flash the thing, and after downloading several roms from chinaecarts, and finally flashed it and guess what - no LCD :silly: . So i tried combining different files from different roms, and now i'm at a point where i can turn on the phone, screen goes white, but the phone boots, it makes the vibration after the boot process completes, and after that the phone is responding to touches (it vibrates), lock/unlock works, PC detects USB Mass Storage Device, USB Composite Device and MTK65xx Android Phone. I also noticed that in the FW packages i downloaded there are some files that aren't flashed (i think) like for example the kernel.img so i was wondering if i can flash it manually? Please someone help, share some FW links, i can't find anymore...
can anyone help with this?? or even identify which s3 clone the phone is from the first post... i have tried many "solutions" for clone 6577 and NONE works.. I have scoured the internet for possible solutions and nothing..
help please!
brad_maliik said:
can anyone help with this?? or even identify which s3 clone the phone is from the first post... i have tried many "solutions" for clone 6577 and NONE works.. I have scoured the internet for possible solutions and nothing..
Click to expand...
Click to collapse
Try this (remove spaces): https:// hotfile.com/dl/207667730 /e94a926/6577_9300_650.zip. html
Hi, I have a big problem with my new Phone Feiteng H7100! After I flashed the ROM (from needrom), nothing happens on the phone! Everything went as described until the green circle. Nothing now … when connected to the PC appears a USB / network device name: Alcatel Single RNDIS interface, nothing more happens.
Can someone help me here? Please
jemmars
Hello everyone,
can anyone help me here really? I've also, quite diligently search through the forums for possible solutions, but I have not found anything. Please, please help me with my phone ... where I still have birthday ... your help I would be today's greatest gift!
Did you tried to reflash with another ROM?
Maybe this will help you: http://forum.xda-developers.com/showthread.php?t=2186116
Please post your experience.
hi, can anyone help me, i have a feiteng h7100, totally bricked, not turn it on, the computer dont recognize, is a dead phone, i flash it with sp flashtool first time says ok, but no turn it on, so i flash it again, in the middle of flashing says error and the cpu dont recognize any more my phone, any ideas..
never flash DSP_BL and preloader. as long as the device is recognized on your PC, its not "dead" othewise you can try the "testpoint" methode, but not all motherboards have one.
hi I'm new here, I have a problem
my brother bought the phone from this site http://www.priceangels.com/PA-i9500...-1G-ROM-4G-4-7--HD-Screen-White--s377967.html
he put this rom on phone http://www.needrom.com/mobile/hdc-galaxy-s4-legend-2/
Now the phone is dead, can not be turned on, not charging battery, but when it attaches to the computer,
show MTK USB Port
Is there any solution for this phone
I can not find a stock rom
Does anyone have this phone
read this thread.
http://forum.xda-developers.com/showthread.php?t=1943442
yes i know it is not realy neatly arranged but i think you can figure it out what to do.
good luck
everything is OK, but I do not have factory rom
that's the problem
Dear Sirs,
My daughter is using a Celkon A119Q HD (Stock Rom is available needrom ). The device uses a MTK6589.
Recently, my friend flashed the wrong preloader on my phone and hard bricked it. Currently it doesn turn on, no display nothing. Me being an idiot did not take a backup using MTK droid tools and I dont have CWM recovery on my phone. So I decided to flash my phone with the stock rom.
I have installed all the necessary drivers and When I connect my phone to SP Flash tools, it is able to identify it. It says "Mediatek DA USB VCOM (Android) (COM5)". However I am unabe to flash it at all. I have tried format, format without boot loader, firmware->upgrade, format all + download, download only and even ran a memory test.
Absolutely nothing seems to work. I have attached the various screenshots of the error messages I get.
I would deeply be in your dept if you could kindly help me and guide me as to what I should do next Sir, since my daughter has been giving me hell over her phone.
:crying:
Thank you very much for the help. I sincerely appreciate it.
Can't figure out, What you mean by a 'Preloader' but looks like you've bumped...
N'ayam Amarsh'e said:
Can't figure out, What you mean by a 'Preloader' but looks like you've bumped...
Click to expand...
Click to collapse
he was trying to install a custom ROM and flashed the PRELOADER first...the process stopped halfway through and the phone has been bricked ever since.. :crying:
rakave said:
Dear Sirs,
My daughter is using a Celkon A119Q HD (Stock Rom is available needrom ). The device uses a MTK6589.
Recently, my friend flashed the wrong preloader on my phone and hard bricked it. Currently it doesn turn on, no display nothing. Me being an idiot did not take a backup using MTK droid tools and I dont have CWM recovery on my phone. So I decided to flash my phone with the stock rom.
I have installed all the necessary drivers and When I connect my phone to SP Flash tools, it is able to identify it. It says "Mediatek DA USB VCOM (Android) (COM5)". However I am unabe to flash it at all. I have tried format, format without boot loader, firmware->upgrade, format all + download, download only and even ran a memory test.
Absolutely nothing seems to work. I have attached the various screenshots of the error messages I get.
I would deeply be in your dept if you could kindly help me and guide me as to what I should do next Sir, since my daughter has been giving me hell over her phone.
:crying:
Thank you very much for the help. I sincerely appreciate it.
Click to expand...
Click to collapse
did you try to restock it.. installing a stock rom is the last option if available.. if the phone is not even turning on, check battery.. make sure your battery is charged..
and at last.. you could just try taking it to the service center if it's in warrenty.. but make sure it doesn't turn on.. don't tell them you were flashing.. they will never know.. hope it help in any way..
btw check out my signature...
Hi
I updated my Phone today using an SD card from the zte website. All was going well and then the screen went off and now I can't start the phone. I have tried a hard reset but it's dead!
Any ideas? Gutted as it's almost new!
Please help if you can.
Cheers
adamfoulkes said:
Hi
I updated my Phone today using an SD card from the zte website. All was going well and then the screen went off and now I can't start the phone. I have tried a hard reset but it's dead!
Any ideas? Gutted as it's almost new!
Please help if you can.
Cheers
Click to expand...
Click to collapse
I have the same problem, did you find a solution?
cheers
Hi
I'm in the same situation, someone has a solution
Help
Me 2.
Help pls.
:crying:
Does it turn on but gets stuck while boot or it doesn't turn on at all?
Sent from my GT-S7262 using Tapatalk
Tali099 said:
Does it turn on but gets stuck while boot or it doesn't turn on at all?
Sent from my GT-S7262 using Tapatalk
Click to expand...
Click to collapse
Hi Tali099 and sorry for my terrible English.
No boot log and only black screen.
Absolutely dead !!!
when connected to pc, find the mobile as: qhsusb_bulk qualcomm 9008 com5.
I had try to unbrick it but unfortunately i didn't find any way to unbrick the chipset: Qualcomm MSM8939 Snapdragon 615 who have the zte blade s6.
Very deep hard brick. :crying:
Have you any idea how to unbrick it ???
I'm the same situation that you.
gining said:
Hi Tali099 and sorry for my terrible English.
No boot log and only black screen.
Absolutely dead !!!
when connected to pc, find the mobile as: qhsusb_bulk qualcomm 9008 com5.
I had try to unbrick it but unfortunately i didn't find any way to unbrick the chipset: Qualcomm MSM8939 Snapdragon 615 who have the zte blade s6.
Very deep hard brick. :crying:
Have you any idea how to unbrick it ???
Click to expand...
Click to collapse
I'm the same situation that you. I need several files for unbrick our phone but I don't found it. I have follow this tutorial: htcmania.com/showthread.php?t=924041
jjcc1999 said:
I'm the same situation that you. I need several files for unbrick our phone but I don't found it. I have follow this tutorial: htcmania.com/showthread.php?t=924041
Click to expand...
Click to collapse
I tried and this way but the "color" was only finds the com port and nothing else. Searching, I found for the "color" is only for chipset Msm8974 and not for ours chipset msm8939. We must look to find the way for unbrick our chipset (msm8939). unfortunately nothing i found as now.
If I can not do anything in the next few days, i will defamation the ZTE in all forums because our problem started from the ZTE proposal to upgrade our mobile with the new version.
gining said:
I tried and this way but the "color" was only finds the com port and nothing else. Searching, I found for the "color" is only for chipset Msm8974 and not for ours chipset msm8939. We must look to find the way for unbrick our chipset (msm8939). unfortunately nothing i found as now.
If I can not do anything in the next few days, i will defamation the ZTE in all forums because our problem started from the ZTE proposal to upgrade our mobile with the new version.
Click to expand...
Click to collapse
I agree with you because the web does not put any warning that may happen or specification in this regard.
Hi
I updated my Phone today using an SD card from the zte website. All was going well and then the screen went off and now I can't start the phone. I have tried a hard reset but it's dead!
Any ideas? Gutted as it's almost new!
Please help if you can.
Cheers
I have exactly the same situation after an official upgrade via SD card..
Black screen will not power on only shows blue light when connected to a charger or laptop.
I have been waiting for over two weeks now for ZTE to provide a solution, nothing, all I get is we are looking into it..
Terrible service and certainly won't be buying any ZTE again
Guys so we are really dead, there is nothing to be done about this problem ? Is this hard-brick ? Any solution here ????
same here
my phone brick after repartition this dump phone
i forget to search that file first..
Please help me s6 was brick [email protected]
reply from ZTE
Hello,
I have been backwards and forwards with ZTE to get this problem resoved and still not sorted. They did send me some instructions of how to reset the device but it needs a piece of software to be able to do this and ZTE won't give it to me to try it out!!!!
I would upload it on here but it seems I am not allowed to or cannot find out how to do it.
This is so frustating!
I got the same problem (black screen) when after rooting and different experiment I tried to put the original ROM back which I downloaded from needrom. After 3 days of continuous searching, I concluded that I have damaged the eMMC Partition by installing a different firmware that was not suitable for my Europe version of Mobile.
This link was quite helpful to understand the problem.
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
To solve this problem first I need the 8939_msimage.mbn of Qualcomm 615 and related files. The other option is to use the service ROM and ZTE TOOL STUDIO, I am unable to find this ROM and other files to repair bootloader. If someone with working ZTE blade s6 or other Qualcomm 615 chipset phone can provide this, it would be really helpful.
Following files are required at least from a Qualcomm 615 MSM8939 Chipset.
8939_msimage.mbn
MPRG8939.mbn
patch0.xml
sahara.xml
rawprogram0.xml
Hello all, I have the same problem with my phone except that when it boot , it freezes on " ZTE screen" . What can I do ?
magicfab38 said:
Hello all, I have the same problem with my phone except that when it boot , it freezes on " ZTE screen" . What can I do ?
Click to expand...
Click to collapse
You can enter recovery mode Power On pressing volume up key.
Try "wipe cache partion" at first and if S6 still doesn't boot up, try next "wipe data/factory reset".
If both measures doesn't work, your system has damage from unknown reason.What change did you it?
I have the same problem
:crying:
adamfoulkes said:
Hi
I updated my Phone today using an SD card from the zte website. All was going well and then the screen went off and now I can't start the phone. I have tried a hard reset but it's dead!
Any ideas? Gutted as it's almost new!
Please help if you can.
Cheers
Click to expand...
Click to collapse
adamfoulkes said:
Hi
I updated my Phone today using an SD card from the zte website. All was going well and then the screen went off and now I can't start the phone. I have tried a hard reset but it's dead!
Any ideas? Gutted as it's almost new!
Please help if you can.
Cheers
Click to expand...
Click to collapse
Did you find a solution ?
---------- Post added at 07:32 PM ---------- Previous post was at 07:17 PM ----------
safderali5 said:
I got the same problem (black screen) when after rooting and different experiment I tried to put the original ROM back which I downloaded from needrom. After 3 days of continuous searching, I concluded that I have damaged the eMMC Partition by installing a different firmware that was not suitable for my Europe version of Mobile.
This link was quite helpful to understand the problem.
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
To solve this problem first I need the 8939_msimage.mbn of Qualcomm 615 and related files. The other option is to use the service ROM and ZTE TOOL STUDIO, I am unable to find this ROM and other files to repair bootloader. If someone with working ZTE blade s6 or other Qualcomm 615 chipset phone can provide this, it would be really helpful.
Following files are required at least from a Qualcomm 615 MSM8939 Chipset.
8939_msimage.mbn
MPRG8939.mbn
patch0.xml
sahara.xml
rawprogram0.xml
Click to expand...
Click to collapse
Hi bro did you find a solution to unbrick the zte blade s6 ?