reboot issue Goes to recovery!! - Moto G 2015 Q&A, Help & Troubleshooting

hello guys i have the moto g 3rd gen xt1541 model with the 2 gb ram
i don't have unlockbootloader or any root
i flash the 6.0.1 after a few days was to go again in 6.0 i try with adb 3 times
faild every time so i was do gain clean flash in 6.0.1 from the start all works great but when
i power off my device and i push the power again it goes in recovery mode and i must push the power botton
to start again
why happen this and what can i do? reflash only recovery img via ADB?
any idea????

Flash again
And make sure that you have done a "factory reset"
And all commands need to be executed.
Hope helps

ExaHamza said:
Flash again
And make sure that you have done a "factory reset"
And all commands need to be executed.
Hope helps
Click to expand...
Click to collapse
yeap it works now when i power off my device goes to black screen and when i put the usb charger saws the % of battery and not
the bootloader ty!

bromoxitos said:
yeap it works now when i power off my device goes to black screen and when i put the usb charger saws the % of battery and not
the bootloader ty!
Click to expand...
Click to collapse
Even if you press the combo buttons?

ExaHamza said:
Even if you press the combo buttons?
Click to expand...
Click to collapse
nono now all work normally i power off my device /black screen and if i push the power botton and up vol goes to bootloader
and with vol up-down goes to safe mode,start,recovery etc all good like before

Related

Volume button fault - Any other ways to go to bootloader?

Hello all,
my sensation's volume rocker is faulty. By pressing volume down and power on, it will not boot into boot loader thus cannot enter recovery.
I know i can use software to boot into it boot loader but what if I am getting bootloops and unable to boot into rom?
Any ADB commands to make the phone boot into bootloader straight?
I am planning to flash the factory RUU and go claim my warranty after i get my Galaxy nexus..
mgear356 said:
Hello all,
my sensation's volume rocker is faulty. By pressing volume down and power on, it will not boot into boot loader thus cannot enter recovery.
I know i can use software to boot into it boot loader but what if I am getting bootloops and unable to boot into rom?
Any ADB commands to make the phone boot into bootloader straight?
I am planning to flash the factory RUU and go claim my warranty after i get my Galaxy nexus..
Click to expand...
Click to collapse
adb reboot recovery
or
adb reboot bootloader
or plain old
adb reboot
wmoore said:
adb reboot recovery
or
adb reboot bootloader
or plain old
adb reboot
Click to expand...
Click to collapse
thansk for your reply bro. but can this work if i am stuck in a bootloop ( before entering any rom)?
mgear356 said:
thansk for your reply bro. but can this work if i am stuck in a bootloop ( before entering any rom)?
Click to expand...
Click to collapse
Possibly not unless your timing is amazing!
Are you stuck in bootloops now or is this hypothetical?
Please, tell if your volumne rocker is so broken that it cant even turn up/turn down volumne during normal use of phone?
If it's ok, thet I suggest method of booting into recovery which I use (and i had problems to boot before - thought it's vol. rocker):
1. press volume down button and hold it!
2. press power button for 2-3 seconds and then release, still holding the volumne down
3. phone boots into recovery after few seconds.
Hope it might help you.
Decado_PL said:
Please, tell if your volumne rocker is so broken that it cant even turn up/turn down volumne during normal use of phone?
If it's ok, thet I suggest method of booting into recovery which I use (and i had problems to boot before - thought it's vol. rocker):
1. press volume down button and hold it!
2. press power button for 2-3 seconds and then release, still holding the volumne down
3. phone boots into recovery after few seconds.
Hope it might help you.
Click to expand...
Click to collapse
Implying he can't control volume in a bootloop, I seriously hope this guy uses 4EXT touch, or else he needs to replace the rocker.
Can you flash zips from USB fastboot?
Sent from my HTC Sensation using Forum Runner
I understood that he can't enter recovery due to some volume button fault. When you stuck in bootloop only thing you can do is pull out the battery, no keys/buttons are usable - tested myself :/
wmoore said:
Possibly not unless your timing is amazing!
Are you stuck in bootloops now or is this hypothetical?
Click to expand...
Click to collapse
not really hypothetical.. in fact i experienced it earlier..
my volume up/down seems to have a mind of his own and at times i will enter "safe mode"
thereafter it will auto reboot unless i am quick enough to do a factory wipe under settings... it will still boot into safe mode but wont auto reboot.
so after knocking a few times on the volume rocker, i am able to boot into normal mode but the volume rocker isnt working. Pressing it once, will cause to decrease the volume and switch to silent mode.
Decado_PL said:
I understood that he can't enter recovery due to some volume button fault. When you stuck in bootloop only thing you can do is pull out the battery, no keys/buttons are usable - tested myself :/
Click to expand...
Click to collapse
lol this sux man..
I dunno if HTC singapore will honor the warranty cause this is a hardware defect and nothing to do with any rom or unlock..
Even in bootloader mode, press up will cause it to go down or at times up. pressing down may or may not respond.
If you in a boot loop adb should see it for split couple seconds so with the phone connected I would keep trying to do adb reboot recovery
Sent from my HTC Sensation using xda premium
Smokuevo said:
If you in a boot loop adb should see it for split couple seconds so with the phone connected I would keep trying to do adb reboot recovery
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
That's what I thought but it didn't happen when I tried it on mine.
From Fastboot, adb commands also work, provided vol - works while powering on. This sucks dude, sorry.
Sent from my HTC Sensation 4G XE with Beats Audio using xda premium
If you have CWM recovery installed (im not sure about other recoverys), you can connect your phone to your computer when it's off and you will have access to a limited adb provided by CWM. You can then use the command "adb reboot recovery" or "adb reboot bootloader" or whatever to do what you need to do.
Wipe all then cant boot into bootloader
Hi, i'm really sorry to bring back this post,
your fear had become my nightmare in reality.
The volume button was somehow (either physically spoil or is not capture click)
during booting process.
I have completely forgotten about it, and do complete wipe
(select wipe all except sdcard in touch recovery).
So, now the phone is completely clean (without rom)
and i'm unable to trigger bootloader/recovery via pwr/vol down button.
I have try take out battery,leave it for 10min and try press
all those button without casing/rocker;
press & hold vol down, den plug in battery;
and press both vol up & down then only pwr button.
The phone now (i assume) boot normally,
stop at HTC logo because there is no rom inside
(just like normal pc boot pass bios but cant find OS).
ironically, i live at singapore too... haha...
---------- Post added at 10:58 PM ---------- Previous post was at 10:51 PM ----------
I read somewhere that the person use pin to press the button really hard
and it manage to go into bootloader
(but I cant find back that post now)
Searching in forum recommend me to peel off the
volume button cover n use pin to press on it directly
(which I do not dare )
So now I sent it to repair shop,
hopefully that person using either g-box or gmbox
(flash box start with G) and can push RUU inside.
God bless me.
p/s : Sorry I should post in Q&A...
Get the phone off. Pull the battery and re-insert. Open fastboot
Fastboot reboot-bootloader
And if you want to flash a ruu directly:
Fastboot erase cache
Fastboot oem rebootRUU
And then flash the ruu
Sent from my HTC Sensation XE with Beats Audio Z715e using Tapatalk
dexter93 said:
Get the phone off. Pull the battery and re-insert. Open fastboot
Fastboot reboot-bootloader
Click to expand...
Click to collapse
Hi, can you tell me exactly step by step how to open fastboot?
pull out the battery, press vol down (??), reinsert?
fastboot devices go no response after booted and halt at htc logo.
Thank you very much.
Have you tried finding where the rocker lines up with the buttons on the phone, and just used the buttons without the back attached?
Sent from my Sensation using XDA
apow12348 said:
Hi, can you tell me exactly step by step how to open fastboot?
pull out the battery, press vol down (??), reinsert?
fastboot devices go no response after booted and halt at htc logo.
Thank you very much.
Click to expand...
Click to collapse
Did I tell you to power it on?
Just shut it down completely(hence battery pull ) and plug it in USB. Use google to get to know how to use fastboot and try with the commands I wrote above. simple as that
Sent from my HTC Sensation XE with Beats Audio Z715e using Tapatalk
Sensation-al! said:
Have you tried finding where the rocket lines up with the buttons on the phone, and just used the buttons without the back attached?
Click to expand...
Click to collapse
Yup, that is what I did all this while, and no success.
dexter93 said:
Did I tell you to power it on?
Just shut it down completely(hence battery pull ) and plug it in USB. Use google to get to know how to use fastboot and try with the commands I wrote above. simple as that
Click to expand...
Click to collapse
Sorry, I always thought that in order to use fastboot usb you must in bootloader already. Will try to search more. Thank in advance.
RECOVERY AND BOOTLOADER (ubislate 7 by datawind }
hi ,i have an old datawind tablet which runs on andorid froyo with kernel version 2.6.32.6 developer @developer#206
android version 2.2.2
model number NASHOBA NORDICA
can anybody please tell me how to enter bootloader in this particular version and also the rooting methods available
please note that this device lacks any physical volume up or down buttons as well as does not provide any adb support
this is a resistive touchscreen model
processor arm 11 366mhz
with conexant hd co processors
screen resolution 640*800
this device very easily overheats ]
battery lithium ion 2100 mah
i am also unable to play any vidoes on this device
ram 256
this device supports SD CARDS and full sized usb 2.0 ports
no hdmi output also
i any body can help me
please do as so
thanks in advance

Lost root and have bootloop...bricked?

Hi,
really need help...I was about to sold my old HTC Sensation XE, rooted and had viper 5.2.1 on it - deleted everything from SD card, but wanted to be sure nothing remained on my phone so I made factory reset (i think I shouldn't to this)..
Now when I turn phone On it loads HTC logo, then Viper logo and restarts and then again HTC, Viper restart...
When I hold power button + vol.down nothing happens (HTC->Viper and restart) + all the buttons are flashing...
Did I bricked my phone for good or is there a way how to reflash everything?
Thanks
hawkeeyee said:
Hi,
really need help...I was about to sold my old HTC Sensation XE, rooted and had viper 5.2.1 on it - deleted everything from SD card, but wanted to be sure nothing remained on my phone so I made factory reset (i think I shouldn't to this)..
Now when I turn phone On it loads HTC logo, then Viper logo and restarts and then again HTC, Viper restart...
When I hold power button + vol.down nothing happens (HTC->Viper and restart) + all the buttons are flashing...
Did I bricked my phone for good or is there a way how to reflash everything?
Thanks
Click to expand...
Click to collapse
v u puled out the battery.....
if not helped then flash recovery through fastboot and then flash viper rom again
is this possible when Im not able to access HBOOT menu or do anything with power + vol down?
hawkeeyee said:
is this possible when Im not able to access HBOOT menu or do anything with power + vol down?
Click to expand...
Click to collapse
Like said above, pull out the battery for 10 seconds n put back in then ul be able to boot into bootloader with vol down + power
didn't helped
hawkeeyee said:
didn't helped
Click to expand...
Click to collapse
U must be doing it wrong or ur volume button is dodgy. Ur phone being in a bootloop should not affect getting into bootloader once uv pulled the battery.
I'm sure it was working before (my girlfriend used it a never told me she is not available to lower the sound)
why are bottom buttons flashing while holding power + vol down?
hawkeeyee said:
I'm sure it was working before (my girlfriend used it a never told me she is not available to lower the sound)
why are bottom buttons flashing while holding power + vol down?
Click to expand...
Click to collapse
I dunno, mine does that if im in a bootloop n i try a hard reset. Dont worry. The vol button mite work but she mite just need to give it an extra push, no harm in cleaning it coz the sensations r bad for dust getting in there. K pull the battery out for a min n put back in then press and hold vol down (hard) and press n hold power button. U should get to bootloader, keep trying till u do. As long as u pull the battery out u should get there at some point.
Sometimes I also have to pull the battery out twice to make it go into bootloader. Just make sure you have enough charge in the battery too.
no luck... tried it around 20 times and nothing... communication via fastboot is not working..
so I guess there is no other way how to enter recovery as vol down and power
?
hawkeeyee said:
no luck... tried it around 20 times and nothing... communication via fastboot is not working..
so I guess there is no other way how to enter recovery as vol down and power
?
Click to expand...
Click to collapse
Dunno bud should work. U can try adb commands but dunno if that will work tho. So boot ur phone normaly and when its at boot animation, plug in ur phone to pc and open command window n type
adb reboot recovery
hawkeeyee said:
no luck... tried it around 20 times and nothing... communication via fastboot is not working..
so I guess there is no other way how to enter recovery as vol down and power
?
Click to expand...
Click to collapse
try this
switch the phone normally
when you see the htc logo or the viper logo type the command adb reboot bootloader
have your device already connected
error: device not found
drivers for win installed, when phone is powered off I can see him in win as removable disk...
asking if I'm doing this as I should:
downloaded Android SDK and made initial set-up as wrote here: http://forum.xda-developers.com/showthread.php?t=2277112
hawkeeyee said:
error: device not found
drivers for win installed, when phone is powered off I can see him in win as removable disk...
asking if I'm doing this as I should:
downloaded Android SDK and made initial set-up as wrote here: http://forum.xda-developers.com/showthread.php?t=2277112
Click to expand...
Click to collapse
Use this tool for fastboot setup
http://forum.xda-developers.com/showthread.php?t=2588979
still same
hawkeeyee said:
still same
Click to expand...
Click to collapse
K, pull the battery out n back in, then leave the battery cover off ur phone and press the vol down button then press n hold the power button (both same time) see if that boots into bootloader.
nope, tried that 30x already
hawkeeyee said:
nope, tried that 30x already
Click to expand...
Click to collapse
what windows OS do you have?
win 7, 64bit
hawkeeyee said:
win 7, 64bit
Click to expand...
Click to collapse
try the latest htc drivers from here
http://forum.xda-developers.com/showthread.php?t=2217396

xt1032 BootLoop (Android starting..) can't enter recovery or bootloader.

Hi everyone im stuck on the resurection of my device (moto g 2013 8GB updated to 5.1 with [5.1 GPE 1 click] from This forum.
I've tried everything or almost for now, cant get it out of that loop.
*Battery pulling.
*hard buttons combinations.
*fastboot and ADB. (not in fastboot mode so.. And as i did flash de 1click before the loop USB Dbgn isn't enabled)
*i think i've tried every toolkit on this forum.
*Raped google search for over a week trying every posible method-
*Only thing left is to take it to church for a blessing. but im not a believer D:
ADD: i've rooted with a "boot.img" from this forum i think it was a 2015 file.
before this i had not 1 issue with the phone. just unlockd the bootloader a few days ago and updated to 5.1 from 5.0.2 becouse of a wifi issue (unknow mac adress) i had to reboot it like 10 times until it appeared again (original mac adress from device, still wrote it down i have it somewhere.)
I think this would be my first post on this forum and it took me over a week to do it becouse this (asking you-comunity) is my last resource.
PS: i had it going betwen 5.0.2 and 5.1 like 4 times to try solving the wifi issue.. only thing it got me was the "line" on the screen like if it where a problem with vertical sync. (i think you are all very familiar with that issue after downgrading the kernel i think.)
the phone just turns it self on everytime. (everytime)
i was able to boot into recovery before the last flash touching the place were the hardware volume button goes (with a neddle) untill it didnt workd anymore and i send it to a store to repair the volume rockers. still no recovery or bootloader boot.
my pc (laptop with 7-32bit recognices it as xt1032. and the one with xp as MTP.)
I've installed every posible thing that i found to bring it back to life even the android sdk full every pkg from 5.0.2 to 5.1 and extras, Motorola drivers and ADB. tried online searching automated from windows and listing it from a folder with the google one. tried adding the hardware manualy and have every ADB thing that i found on device mng but everyone is wit a yellow triangle. (No USB Debuging enabled so why bother anymore.)
I think that's about it.
You seem to be making things massively over-complicated.
Flash latest TWRP from here: http://forum.xda-developers.com/moto-g/development/recovery-twrp-2-8-2-0-touch-recovery-t2980621
Example fastboot command:
fastboot flash recovery twrp.img​
If you cannot enter TWRP, use ONLY this fastboot command:
fastboot erase userdata​
Via TWRP, flash latest GPE Optimized ROM from here: http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-lollipop-rom-t3017510
i m sorry for my english, isnt my native lang. And for making it over complicated.
i cant enter fastboot mode or give any order to the phone trough fastboot on a console.
I have installed a TWRP touch, just cant acces it. dont know if it is the hardware button (Vol -) or what.
so it dosnt show up on fastboot devices nor adb devices.
am i not understanding something ?
Thanks for replying and taking the time to help!
Enter fastboot mode by turning on phone while holding Volume Down.
lost101 said:
Enter fastboot mode by turning on phone while holding Volume Down.
Click to expand...
Click to collapse
tried again just in case. No luck, wont boot into recovery or bootloader mode. vol (-) or power and vol (-)
it just "tries" to boot up normaly and gets stuck on "android starting" untill "initializing apps" 4 colours flying and reboots again.
dieguitwow1 said:
tried again just in case. No luck, wont boot into recovery or bootloader mode. vol (-) or power and vol (-)
it just "tries" to boot up normaly and gets stuck on "android starting" untill "initializing apps" 4 colours flying and reboots again.
Click to expand...
Click to collapse
If the volume rocker is not broken, then you should be able to enter fastboot mode. Hold power button until phone turns off completely.
If the volume rocker is not broken, then you should be able to enter fastboot mode. Hold power button until phone turns off completely.
Click to expand...
Click to collapse
did that, tried pulling the battery off and holding the keys (down and power or just vol down) and starting it. no way it goes into bootloader or recovery. When i do any of those things the phone just powers back up it self and boots into system or tries to, and get stuck in bootloop.
Im gonna try a gtag cable or something like that tomorrow from a friend. would it work to send it to bootloader or recovr?
dieguitwow1 said:
did that, tried pulling the battery off and holding the keys (down and power or just vol down) and starting it. no way it goes into bootloader or recovery. When i do any of those things the phone just powers back up it self and boots into system or tries to, and get stuck in bootloop.
Im gonna try a gtag cable or something like that tomorrow from a friend. would it work to send it to bootloader or recovr?
Click to expand...
Click to collapse
You said you had the volume rocker repaired - but it seems at least, vol down is not working. I have no experience with jtag kits or commands.
lost101 said:
You seem to be making things massively over-complicated.
Flash latest TWRP from here: http://forum.xda-developers.com/moto-g/development/recovery-twrp-2-8-2-0-touch-recovery-t2980621
Example fastboot command:
fastboot flash recovery twrp.img​
If you cannot enter TWRP, use ONLY this fastboot command:
fastboot erase userdata​
Via TWRP, flash latest GPE Optimized ROM from here: http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-lollipop-rom-t3017510
Click to expand...
Click to collapse
lost101 said:
Enter fastboot mode by turning on phone while holding Volume Down.
Click to expand...
Click to collapse
lost101 said:
You said you had the volume rocker repaired - but it seems at least, vol down is not working. I have no experience with jtag kits or commands.
Click to expand...
Click to collapse
i think it's not repaired properly, or the last time i flashed it fastboot might have send a command like "fastboot normalboot" or something like that. Would that be stoping me from entering recovery mode or fastboot?
dieguitwow1 said:
i think it's not repaired properly, or the last time i flashed it fastboot might have send a command like "fastboot normalboot" or something like that. Would that be stoping me from entering recovery mode or fastboot?
Click to expand...
Click to collapse
If you power phone off completely, then no commands are remembered. The button is broken.
lost101 said:
If you power phone off completely, then no commands are remembered. The button is broken.
Click to expand...
Click to collapse
Thanks! so, what should i do now? is there any way to fix it or bypass it ?
i was "touching" the button with a niddle until it stoped working is there a fix for it? :fingers-crossed:
dieguitwow1 said:
Thanks! so, what should i do now? is there any way to fix it or bypass it ?
i was "touching" the button with a needle until it stopped working is there a fix for it? :fingers-crossed:
Click to expand...
Click to collapse
Sorry, I can't help you with that. If you know someone good with a soldering iron, maybe they can fix it - otherwise, try another repair shop.
its still seen by my PC with XP. As xt1032 on the bootloop can i do something ? moto device mngr starts with de Moto logo on the sys tray..
dieguitwow1 said:
its still seen by my PC with XP. As xt1032 on the bootloop can i do something ? moto device mngr starts with de Moto logo on the sys tray..
Click to expand...
Click to collapse
adb reboot bootloader​
lost101 said:
adb reboot bootloader​
Click to expand...
Click to collapse
even if "USB Debuging" isn't enabled?
Edit: Result= [ Error: device ´<null>´ not found ]
dieguitwow1 said:
even if "USB Debuging" isn't enabled?
Edit: Result= [ Error: device ´<null>´ not found ]
Click to expand...
Click to collapse
Yes, USB Debugging would need to be enabled.
lost101 said:
Yes, USB Debugging would need to be enabled.
Click to expand...
Click to collapse
so, apart from taking it to repair again for the button, what can i do?:fingers-crossed:
dieguitwow1 said:
so, apart from taking it to repair again for the button, what can i do?:fingers-crossed:
Click to expand...
Click to collapse
I am not aware of any other options.
i managed to recover the phone it works normaly but screen goes off and on all the time, every 5 sec. Except on Bootloader Mode.
dieguitwow1 said:
i managed to recover the phone it works normaly but screen goes off and on all the time, every 5 sec. Except on Bootloader Mode.
Click to expand...
Click to collapse
What has changed? Did you get the vol button fixed?

hard bricked my MT-TL10

Hi there,
Kindly help... I successfully installed B512 on my TL10 using force upgrade method, afterwhich I changed recovery to TWRP 3.0.2 using mobopx v2.2, which was also successful. And then I installed SuperSU 2.46 via TWRP, then cleared cache/dalvik. But upon rebooting system, I get a blank screen, even after waiting for more than 15 minutes.
And so I tried going to TWRP (Vol+ and power), which was successful, in order to boot to bootloader, with the intention of loading back the stock bootloader via adb, so that I can force install B512 from my microSD card again. It seemed to install fine...
However, at this point, I cannot reboot to bootloader (Vol- and power) anymore, I only get blank screen. Trying recovery (Vol+ and power) doesn't work either. Rebooting normally gives me the same. I cannot by any means connect via adb now.
Is there any way to unbrick my phone at this point?
Thanks so much. Cheers.
Works entrance for the recovery (Vol+ and Vol- and Power)?
rakrakrak said:
Works entrance for the recovery (Vol+ and Vol- and Power)?
Click to expand...
Click to collapse
No bro...
eusagc said:
However, at this point, I cannot reboot to bootloader (Vol- and power) anymore, I only get blank screen. Trying recovery (Vol+ and power) doesn't work either. Rebooting normally gives me the same. I cannot by any means connect via adb now.
Click to expand...
Click to collapse
What happens when you do a Vol up + power?
CloudCompute said:
What happens when you do a Vol up + power?[/QU
The phone "doesn't want to turn off" bro. It has fully discharged, but as soon as I plug the charger in, it immediately powers up. When it does, now it shows the Huawei logo. But it's stuck there, and if I press the power button for a few secs, it will power down, but immediately power up again...
Click to expand...
Click to collapse
eusagc said:
CloudCompute said:
What happens when you do a Vol up + power?[/QU
The phone "doesn't want to turn off" bro. It has fully discharged, but as soon as I plug the charger in, it immediately powers up. When it does, now it shows the Huawei logo. But it's stuck there, and if I press the power button for a few secs, it will power down, but immediately power up again...
Click to expand...
Click to collapse
Let it get fully charged first. Then remove the charger and keep the Vol up and power button pressed for ~10 secs or more, and see where it takes you.
Click to expand...
Click to collapse
CloudCompute said:
eusagc said:
Let it get fully charged first. Then remove the charger and keep the Vol up and power button pressed for ~10 secs or more, and see where it takes you.
Click to expand...
Click to collapse
Ok dude, will do. Thanks!
Click to expand...
Click to collapse
CloudCompute said:
eusagc said:
Let it get fully charged first. Then remove the charger and keep the Vol up and power button pressed for ~10 secs or more, and see where it takes you.
Click to expand...
Click to collapse
Done bro. Although I must say, I'm kinda back like yesterday when the phone is just helplessly discharging until it drops dead. Pressing vol+ and power restarts the phone, but I'm still stuck at the logo...
Click to expand...
Click to collapse
CloudCompute said:
Done bro. Although I must say, I'm kinda back like yesterday when the phone is just helplessly discharging until it drops dead. Pressing vol+ and power restarts the phone, but I'm still stuck at the logo...
Click to expand...
Click to collapse
You seem to be in a sticky situation bro. Your recovery seems to be broken because in stock recovery Vol up + power should ideally take you to recovery and not restart. If you could somehow boot into fastboot mode then it could open up some options to bring your phone to life.
With no way to connect to the phone the only options left are the hardware buttons. I am sure you'd have tried them already, but just in case you have not, try the other 2 key combinations also, Vol down + power and Vol up + Volume down + power, for ~10 secs, to check if any of these either forces a factory reset or boots the phone into fastboot mode.
eusagc said:
Hi there,
Kindly help... I successfully installed B512 on my TL10 using force upgrade method, afterwhich I changed recovery to TWRP 3.0.2 using mobopx v2.2, which was also successful. And then I installed SuperSU 2.46 via TWRP, then cleared cache/dalvik. But upon rebooting system, I get a blank screen, even after waiting for more than 15 minutes.
And so I tried going to TWRP (Vol+ and power), which was successful, in order to boot to bootloader, with the intention of loading back the stock bootloader via adb, so that I can force install B512 from my microSD card again. It seemed to install fine...
However, at this point, I cannot reboot to bootloader (Vol- and power) anymore, I only get blank screen. Trying recovery (Vol+ and power) doesn't work either. Rebooting normally gives me the same. I cannot by any means connect via adb now.
Is there any way to unbrick my phone at this point?
Thanks so much. Cheers.
Click to expand...
Click to collapse
Go back to stock recovery reflash stock rom make sure you have a unlocked bootloader......all remember that Google is your friend.....
CloudCompute said:
You seem to be in a sticky situation bro. Your recovery seems to be broken because in stock recovery Vol up + power should ideally take you to recovery and not restart. If you could somehow boot into fastboot mode then it could open up some options to bring your phone to life.
Click to expand...
Click to collapse
That's correct bro. Although it appears from adb that I was able to install the stock recovery, I cannot access it with Vol+ and power.
CloudCompute said:
With no way to connect to the phone the only options left are the hardware buttons. I am sure you'd have tried them already, but just in case you have not, try the other 2 key combinations also, Vol down + power and Vol up + Volume down + power, for ~10 secs, to check if any of these either forces a factory reset or boots the phone into fastboot mode.
Click to expand...
Click to collapse
Yes, I did. And I can't even boot to bootloader after all that... The phone only seems to charge, but is stuck at the logo.
I'm ready to send this to Huawei's service center. Is there anything more I can do at this point before I do that? Thanks so much.
stinka318 said:
Go back to stock recovery reflash stock rom make sure you have a unlocked bootloader......all remember that Google is your friend.....
Click to expand...
Click to collapse
Thanks bro, but that's what I did, or at least was planning to do. After rooting B512 via TWRP, the phone got stuck at the logo. And so I tried to install stock recovery, which it did, in order to reflash the stock ROM. But at this point I'm still stuck at the logo, and I can't access recovery and BL anymore. The BL is unlocked right from the start...
eusagc said:
Thanks bro, but that's what I did, or at least was planning to do. After rooting B512 via TWRP, the phone got stuck at the logo. And so I tried to install stock recovery, which it did, in order to reflash the stock ROM. But at this point I'm still stuck at the logo, and I can't access recovery and BL anymore. The BL is unlocked right from the start...
Click to expand...
Click to collapse
Did you try volume down and then plug USB in on computer then command prompt fast boot reboot it may work.
eusagc said:
I'm ready to send this to Huawei's service center. Is there anything more I can do at this point before I do that? Thanks so much.
Click to expand...
Click to collapse
Go ahead, send it to Huawei service centre. They'll have ways to reach the internal memory after opening up the device.
stinka318 said:
Did you try volume down and then plug USB in on computer then command prompt fast boot reboot it may work.
Click to expand...
Click to collapse
Thank you for this suggestion brother. I tried exactly as you described, however, the phone looks badly discharged, and while the screen was blinking/showing the red battery icon, it doesn't seem to want to charge. I waited around 5 minutes, but nothing seems to progress from here.
And so now, I moved the USB cable to a proper charger, and now it seems to be charging, with the LED light a steady red, and the screen the normal red circle with "0%" inside. It seems to be charging at the moment, although I really have to wait until it shows "1%" until I can surely say so.
One thing that's different now is that the phone hasn't turned on (by itself) yet. And at least this looks promising.
I'll let you know what happens in a while... Thank you!
eusagc said:
Thank you for this suggestion brother. I tried exactly as you described, however, the phone looks badly discharged, and while the screen was blinking/showing the red battery icon, it doesn't seem to want to charge. I waited around 5 minutes, but nothing seems to progress from here.
And so now, I moved the USB cable to a proper charger, and now it seems to be charging, with the LED light a steady red, and the screen the normal red circle with "0%" inside. It seems to be charging at the moment, although I really have to wait until it shows "1%" until I can surely say so.
One thing that's different now is that the phone hasn't turned on (by itself) yet. And at least this looks promising.
I'll let you know what happens in a while... Thank you!
Click to expand...
Click to collapse
Charging's at 4% now... And the phone hasn't turned on so far... Looks promising...
eusagc said:
Charging's at 4% now... And the phone hasn't turned on so far... Looks promising...
Click to expand...
Click to collapse
All well now?
CloudCompute said:
All well now?
Click to expand...
Click to collapse
I was out of town for the past few weeks and didn't have time to do this. I'm back now and plan to work on this tonight. Thank you bro, I'll let you know how it goes...

Bootloop Google Logo (Try a lot a solutions)

Hi,
I have a problem with my Nexus 5, it bootloop on the Google Logo
I try to put a little piece of paper behind the power button and also to click on the power button a lot of times during the boot but it still stuck..
What can I do to try fix it ?
Thanks in advance
is this the kind of bootloop where it loops because of a stuck power button or is it a software based bootloop?
matgras said:
is this the kind of bootloop where it loops because of a stuck power button or is it a software based bootloop?
Click to expand...
Click to collapse
Same as this : https://www.youtube.com/watch?v=jzj73qYg5HA
I take the motherboard off, try to connect just the battery and the screen but same problem..
nathan30 said:
Same as this : https://www.youtube.com/watch?v=jzj73qYg5HA
I take the motherboard off, try to connect just the battery and the screen but same problem..
Click to expand...
Click to collapse
that happened to my old ativ s as well, it was due to a broken power button (electrically stuck, not mechanically) the only solution for me was to solder a new power button on it. But I just used it as an excuse to get a new phone.
matgras said:
that happened to my old ativ s as well, it was due to a broken power button (electrically stuck, not mechanically) the only solution for me was to solder a new power button on it. But I just used it as an excuse to get a new phone.
Click to expand...
Click to collapse
Did you try this solution or not ? To know if I can try to do it
nathan30 said:
Did you try this solution or not ? To know if I can try to do it
Click to expand...
Click to collapse
I haven't, it may be very hard depending on the phone model, I just removed it with pliers so I could boot it with a usb cable and I got all the data I needed from my phone.
Can you get your phone into recovery or fastboot mode?
matgras said:
I haven't, it may be very hard depending on the phone model, I just removed it with pliers so I could boot it with a usb cable and I got all the data I needed from my phone.
Can you get your phone into recovery or fastboot mode?
Click to expand...
Click to collapse
So I try to unsolder the power button and now the phone didn't bootloop anymore. Now I'm waiting the new power button I ordered to see.
And to answer your question, I was not able to reach fastboot or the recovery
nathan30 said:
So I try to unsolder the power button and now the phone didn't bootloop anymore. Now I'm waiting the new power button I ordered to see.
And to answer your question, I was not able to reach fastboot or the recovery
Click to expand...
Click to collapse
if you install gravitybox and xposed there should be an option to turn on the screen with the volume buttons (I'm not sure though, it might have been another module) so you could use that as a temporary solution.
matgras said:
if you install gravitybox and xposed there should be an option to turn on the screen with the volume buttons (I'm not sure though, it might have been another module) so you could use that as a temporary solution.
Click to expand...
Click to collapse
I can't have the phone booting, so I have to wait the new button ^^
nathan30 said:
I can't have the phone booting, so I have to wait the new button ^^
Click to expand...
Click to collapse
with phone turned off, (you can remove the battery and re plug it), hold the volume down button and connect it to the wall charger(do not use PC,it will trigger lg download mode), then you will be able to go to fastboot.
Once there you can:
fastboot reboot to boot to normal OS
fastboot boot twrp so you can install a rom or any other mod
opssemnik said:
with phone turned off, (you can remove the battery and re plug it), hold the volume down button and connect it to the wall charger(do not use PC,it will trigger lg download mode), then you will be able to go to fastboot.
Once there you can:
fastboot reboot to boot to normal OS
fastboot boot twrp so you can install a rom or any other mod
Click to expand...
Click to collapse
Oh I didn't know this tips. Thanks a lot I will try asap. But the lg download mode can't be a good solution to reinstall a rom with the computer?
nathan30 said:
Oh I didn't know this tips. Thanks a lot I will try asap. But the lg download mode can't be a good solution to reinstall a rom with the computer?
Click to expand...
Click to collapse
it locks the bootloader and fully wipes the userdata
here is the thread link
http://forum.xda-developers.com/goo...orial-how-to-flash-factory-images-lg-t2713833
opssemnik said:
it locks the bootloader and fully wipes the userdata
here is the thread link
http://forum.xda-developers.com/goo...orial-how-to-flash-factory-images-lg-t2713833
Click to expand...
Click to collapse
So I try to push volume down and connecting the charger. I reach the fastboot menu but I can't select "start" or something else because without power button I can't validate my choice..
nathan30 said:
So I try to push volume down and connecting the charger. I reach the fastboot menu but I can't select "start" or something else because without power button I can't validate my choice..
Click to expand...
Click to collapse
as i said, you need a computer once you reach fastboot mode, to send the commands.
fastboot reboot - to boot into normal OS
fastboot boot twrp - to boot twrp
opssemnik said:
as i said, you need a computer once you reach fastboot mode, to send the commands.
fastboot reboot - to boot into normal OS
fastboot boot twrp - to boot twrp
Click to expand...
Click to collapse
Oh i didn't understand, thanks a lot it's working
Now I'm just waiting my new power button
i had this **** sorry for swearing i thought its something with my ROM CM13 Nightly I tried the repair service they said that they changed the power button no data was deleted so its probably the button but some one had a guide how to get the phone out that **** using your PC and manual ADB commands ( No program command line only )
I need help with this issue
when this problem reached me it was a meter of replacing the power button itself (it's like stuck there) by the way my phone was still under warranty so they changed it for me
https://www.ifixit.com/Answers/View/208337/How+do+I+fix+a+Nexus+5+Power+Button+Issue
https://www.aliexpress.com/store/pr...821-NEW-Free-Shipping/629458_32289287372.html
https://www.aliexpress.com/popular/nexus-5-on-off-switch.html
If that helped you dont forget to press the thank you button

Categories

Resources