This is the modem and bootloader of the lastest N910U MM firmware which can ONLY be flashed on N910U devices.
Your warranty is now void. I wont take any responsibility of any human error.
Here is the DOWNLOAD link.
https://drive.google.com/file/d/0B_WW1D1N7xUtNkRETHZSSDNObU0/view?usp=sharing
Procedure of flashing :
1. Download the file from the link above and the attachment below
2. Extract the zip you downloaded
3. Open Odin3 v3.11.1.exe
4. Assign the bootloader file in "BL" and the modem file in "CP"
5. Connect your N910U to computer in Downloading Mode
6. Click "Start" and there you finish
If you have any question, you can reply / PM me and don't hesitate to hit the " Thanks!" button below !!:laugh:
EDIT: minor mistakes made
the file has been reuploaded
EDIT2: Updated from 15/7/16 firmware
EDIT3: Updated from 9/8/16 firmware
Cheers
chantak said:
This is the modem and bootloader of the lastest N910U MM firmware which can ONLY be flashed on N910U devices.
Your warranty is now void. I wont take any responsibility of any human error.
Here is the DOWNLOAD link.
https://drive.google.com/open?id=0B_JWkEWQ6KIiUDNRcTlrQzRWTTg
Procedure of flashing :
1. Download the file from the link above and the attachment below
2. Extract the zip you downloaded
3. Open Odin3 v3.10.7.exe
4. Assign the bootloader file in "BL" and the modem file in "CL"
5. Connect your N910U to computer in Downloading Mode
6. Click "Start" and there you finish
If you have any question, you can reply / PM me and dont hesitate to hit the " Thanks!" button below !!:laugh:
Click to expand...
Click to collapse
Thank you .
I've been looking for this. Thanks bro!
can anyone share N910U stock kernel plz
djmax81 said:
can anyone share N910U stock kernel plz
Click to expand...
Click to collapse
https://drive.google.com/open?id=0B_JWkEWQ6KIiWFFXREVubldwaFU
here you go
chantak said:
https://drive.google.com/open?id=0B_JWkEWQ6KIiWFFXREVubldwaFU
here you go
Click to expand...
Click to collapse
THIS IS NOT WORKING !!! BINARY ERROR, NOT THRU ODIN ATLEAST !!! :s
N910UXXU2DPC2 Modem +BootLoader Odin .md5
Working :
Modem : https://www.dropbox.com/s/2en5t81tp73w3db/modem.tar.md5?dl=0
BootLaoder https://www.dropbox.com/s/3mqn9z4y8kh6f1i/sboot.tar.md5?dl=0
---------- Post added at 08:52 PM ---------- Previous post was at 08:10 PM ----------
truenitos said:
THIS IS NOT WORKING !!! BINARY ERROR, NOT THRU ODIN ATLEAST !!! :s
Click to expand...
Click to collapse
Check i have posted working BL and Modem
Thanks mate
truenitos said:
Thanks mate
Click to expand...
Click to collapse
yeah i found the mistakes
i updated the post and the file before ur reply
plz check agaain
chantak said:
yeah i found the mistakes
i updated the post and the file before ur reply
plz check agaain
Click to expand...
Click to collapse
No need ! but its already linked with mine
so all good now
the procedure is: flash rom + flash kernel (suemax) + Modem Odin. True?
Hi
Can it work with (910C)
If not, could anyone tel me where could I find it.
Thank u
miangelgabriel said:
the procedure is: flash rom + flash kernel (suemax) + Modem Odin. True?
Click to expand...
Click to collapse
noise fix by not-i
u can find it in suemax kernel thread
---------- Post added at 07:03 AM ---------- Previous post was at 07:01 AM ----------
yagahrhm said:
Hi
Can it work with (910C)
If not, could anyone tel me where could I find it.
Thank u
Click to expand...
Click to collapse
N910C doesn't need separate flashing of bootloader and modem
beacuse all the roms are base on N910C base
so u just flash rom for ur N910C with kernel of ur choice
there are many options like talexop , H vitamin , suemax
Best to change "CL" to "CP" in the instructions
NZCloud said:
Best to change "CL" to "CP" in the instructions
Click to expand...
Click to collapse
sorry for the typo:highfive:
corrected btw
This is a bootloader for MM.
May i be able to downgrade to 4.4.4 if someone can offer me a 4.4.4 bootloader?
Anyway to downgrade to 4.4.4, please?
godel.chen said:
This is a bootloader for MM.
May i be able to downgrade to 4.4.4 if someone can offer me a 4.4.4 bootloader?
Anyway to downgrade to 4.4.4, please?
Click to expand...
Click to collapse
since bootloader of firmware since 5.1.1 is mostly locked
you can try your luck
but most likely it would fail even if u have the kitkat bootloader.
cheers
chantak said:
since bootloader of firmware since 5.1.1 is mostly locked
you can try your luck
but most likely it would fail even if u have the kitkat bootloader.
cheers
Click to expand...
Click to collapse
Many thanks.
Still seeking a way to get back to 4.4.4, i have another N910U on 4.4.4.
This N910U on 5.0.1 was returned from maintenance service since it's no longer get signals from telecom, and had motherboard replaced.
Both of them were on 4.4.4, now i have one in 5.0.1...
One of my app won't run on 5.0.1.
It's a big trouble for me...
Don't have kitkat bootloader, either.
Headache...
So I flashed Hani's MM rom while using the BL and modem here. Both flash successfully through Odin but I'm still having the no sim issue and baseband isn't detected, so I'm wondering if there's another way to get the modem working.
Thanks!
Velathawen said:
So I flashed Hani's MM rom while using the BL and modem here. Both flash successfully through Odin but I'm still having the no sim issue and baseband isn't detected, so I'm wondering if there's another way to get the modem working.
Thanks!
Click to expand...
Click to collapse
its related to the kernel embedded in the Hani's ROM
what u can do is flashing the kernel made by Suemax/just wait til the update of his rom that can fix the issue
Related
Here is the Rogers official stock ROM for I727R. This includes a new radio, it should be unlocked for gsm/3g/lte toggle...it has not been tested with the AT&T Skyrocket so flash at your own risk...it is very possible you could end up with a brick. Thanks to Przekret for sharing with us!
password: sampro.pl
http://hotfile.com/dl/136347756/818836d/SGH-I727R_RWC_I727RUXKJ7_I727RRWCKJ7_I727RUXKJ7.rar.html
This rooted version or official?
How do you flash this? Also how do I open it up on my computer or extract it, I need some files out of it (radio).. it asks for password when i try to extract the tar.md5
twopumpchump said:
Here is the Rogers official stock ROM for I727R. This includes a new radio, it should be unlocked for gsm/3g/lte toggle...it has not been tested with the AT&T Skyrocket so flash at your own risk. Thanks to Przekret for sharing with us!
http://hotfile.com/dl/136347756/818836d/SGH-I727R_RWC_I727RUXKJ7_I727RRWCKJ7_I727RUXKJ7.rar.html
Click to expand...
Click to collapse
This file is passworded. Can you please provide the password to use this?
playin4sheezy said:
This file is passworded. Can you please provide the password to use this?
Click to expand...
Click to collapse
try sampro.pl
Sent from my SAMSUNG-SGH-I727 using xda premium
thats one thing i havent seen since i jumped to this samsung device, radio roms. I assume then that its possible just yet to be done as its so new?
Anyone tried this out yet? Just wondering what the differences are...? And what does "unlocked for gsm/3g/lte toggle" mean? The stock Rogers rom already has this ability to toggle between LTE/GSM/HSPA... Also mine came stock with I727RUXKJ7....
I'm kinda confused here...
How to extract system.img.tar.md5? I want to get to the system folder
Girn said:
How to extract system.img.tar.md5? I want to get to the system folder
Click to expand...
Click to collapse
If you're using Windows, just pull the system.img.ext4 out with winRAR, and use something like Ext2explore to open the system.img.ext4 file.
EDIT: Nevermind, doesn't seem to work on this file..
L1near said:
Anyone tried this out yet? Just wondering what the differences are...? And what does "unlocked for gsm/3g/lte toggle" mean? The stock Rogers rom already has this ability to toggle between LTE/GSM/HSPA... Also mine came stock with I727RUXKJ7....
I'm kinda confused here...
Click to expand...
Click to collapse
could mean for using the radio on other roms? currently ran into the issue where the juggernaut rom doesn't allow it.
First post updated with password....enjoy
Does Not Work
i have a galaxy s2 lte from rogers neve rhad a problem with any of the custom roms out but when i flashed this my phone is got stuck in a boot logo loop i then tried changing the tar.md5 file to just .tar same result, can you help me get out of this boot logo loop? (keeps showing big S and under it says samsung galaxy SII lte)
quick reply/fix would be appreciated thank you : )
p.s i put the the file in odin on the PDA section only Auto Reboot was checked as usual so theres no problem there
and when odin was done flashing it said success both times
---------- Post added at 12:22 AM ---------- Previous post was at 12:14 AM ----------
i fixed it by going into recovery mode (hold up and down volume keys and power button) and then i cleared the cache and did a factory reset
I assume this ROM is not rooted?
Hey OP could you repost the link. Its not working..
Thanks
AstroDigital said:
I assume this ROM is not rooted?
Click to expand...
Click to collapse
usually these releases are stock ROMS - meaning no root.
twopumpchump said:
Here is the Rogers official stock ROM for I727R. This includes a new radio, it should be unlocked for gsm/3g/lte toggle...it has not been tested with the AT&T Skyrocket so flash at your own risk...it is very possible you could end up with a brick. Thanks to Przekret for sharing with us!
password: sampro.pl
http://hotfile.com/dl/136347756/818836d/SGH-I727R_RWC_I727RUXKJ7_I727RRWCKJ7_I727RUXKJ7.rar.html
Click to expand...
Click to collapse
Hotfile.com link is down, is there any other place to get this rom?
Did you try google?
https://www.google.com/search?as_q=...=any&safe=images&tbs=&as_filetype=&as_rights=
http://hotfile.com/dl/146339661/7644201/I727RUXKJ7_I727RRWCKJ7_RWC.zip.html
is direct from http://www.sammobile.com/firmware/
CZ Eddie said:
Did you try google?
https://www.google.com/search?as_q=...=any&safe=images&tbs=&as_filetype=&as_rights=
Click to expand...
Click to collapse
Yeah I did - a lot of broken links. The ones that weren't seemed pretty sketchy (signups/etc).
---------- Post added at 04:46 PM ---------- Previous post was at 04:45 PM ----------
lart2150 said:
http://hotfile.com/dl/146339661/7644201/I727RUXKJ7_I727RRWCKJ7_RWC.zip.html
is direct from http://www.sammobile.com/firmware/
Click to expand...
Click to collapse
Thanks, I did end up finding it at sammobile.com
Here is the deodexed Flash for the new 4.4.4 Firmware.
1. You must have Root
2. You must have CWM
3. Flash this Mod
Important:
This is not a Rom only a deodexed Mod for the Stock 4.4.4 Firmware
Download : https://mega.co.nz/#!xwlCBTRY!SUBviz_Ko5BiEL7qoWNFTm24KLRnk8y8MtSimCmMJug
Mirror: https://www.dropbox.com/s/dc3zs081jg8pyud/deodex fw. 4.4.4 xperia Z1 Compact.zip
how did you make this? kamome tool?
Yes.
I have begin to make a dark Mod.
And later to a dark Rom
I used newroot... then flashed this MOD, but I got bootloop... How did you root?
BTW, is this the RU, or EURO or DE version of 4.4.4?
BarbasanAB said:
I used newroot... then flashed this MOD, but I got bootloop... How did you root?
Click to expand...
Click to collapse
Wich fw did you have?
This is ONLY for the new 4.4.4 fw.
This Mod will only deodex the stock odex Firmware.
I flashed the 108 RU via flashtool. Root with newroot. Then flashed your MOD...
BarbasanAB said:
I flashed the 108 RU via flashtool. Root with newroot. Then flashed your MOD...
Click to expand...
Click to collapse
I have checked this fw version and have flashed this Mod and did not have any bugs.Now i'am on the generic de fw.
The best is,flash a other Version and than my Mod.
Root and Recovery can you take what you want.
That is not relevant wich you used.
Fact is.. You must have Root and a Recovery for Flash.
1. Flash via Flashtool a other ftf
2. Root your Device
3. Flash the Recovery
4. Flash my Deodexed Mod
is it must be unlock bootloader before flash it with flashtool?
my device already rooted on 4.4.2
riezamr said:
is it must be unlock bootloader before flash it with flashtool?
my device already rooted on 4.4.2
Click to expand...
Click to collapse
No, my Device is locked with fw 4.4.4
riezamr said:
is it must be unlock bootloader before flash it with flashtool?
my device already rooted on 4.4.2
Click to expand...
Click to collapse
You dont need a open BL.
Only,for a custom Kernel you need a open BL.
djsnoopyxxl said:
Here is the deodexed Flash for the new 4.4.4 Firmware.
1. You must have Root
2. You must have CWM
3. Flash this Mod
Important:
This is not a Rom only a deodexed Mod for the Stock 4.4.4 Firmware
Download : https://mega.co.nz/#!xwlCBTRY!SUBviz_Ko5BiEL7qoWNFTm24KLRnk8y8MtSimCmMJug
Click to expand...
Click to collapse
hey mate! thanks man for the file! i've been trying to deodexed 4.4.4 using kamome tool but got bootloop! but then i flash your file, boom! hahahaa my stock 4.4.4 finally deodexed! thanks man! already click thanks button! :good::good::good:
Thanks works like charm
Link not working
Please post another link...This one is not working for me
Helow...Is this still alive or not??
kushal_neov said:
Please post another link...This one is not working for me
Click to expand...
Click to collapse
kushal_neov said:
Helow...Is this still alive or not??
Click to expand...
Click to collapse
Link works fine for me. If you are downloading through your phone, request the page to be in Desktop Mode through Chrome and then you can download the file.
hol17 said:
Link works fine for me. If you are downloading through your phone, request the page to be in Desktop Mode through Chrome and then you can download the file.
Click to expand...
Click to collapse
I've tried evrything...through my laptop, desktop, android phone and even a nokia s60 phone... The link just wont open! It says page not found..
kushal_neov said:
Please post another link...This one is not working for me
Click to expand...
Click to collapse
Link is working.
i have try it for 5 times
djsnoopyxxl said:
Link is working.
i have try it for 5 times
Click to expand...
Click to collapse
can you please tell me how I can create a flashable zip using kamome tool...I mean what changes I've to make in the zip created using the tool??
I tried it but it gives an error even before starting flash..
kushal_neov said:
can you please tell me how I can create a flashable zip using kamome tool...I mean what changes I've to make in the zip created using the tool??
I tried it but it gives an error even before starting flash..
Click to expand...
Click to collapse
I share a Tutorial for this, tonight.
Wil using this method to deodex allow the 4k and 120fps mod to work properly? I want to use that but without the hassle of unlocking the bootloader and whatnot.
Sent from my D5503 using XDA Free mobile app
I posted the S6 odin tar file earlier and here you go the one for the Edge.... Enjoy!
DOWNLOAD
SPRINT right? When i come from school il flash it.
---------- Post added at 06:19 AM ---------- Previous post was at 06:12 AM ----------
REKTAZOID said:
SPRINT right? When i come from school il flash it.
Click to expand...
Click to collapse
Same process as restoring to stock firmware btw?
REKTAZOID said:
SPRINT right? When i come from school il flash it.
---------- Post added at 06:19 AM ---------- Previous post was at 06:12 AM ----------
Same process as restoring to stock firmware btw?
Click to expand...
Click to collapse
Yes and yes.
there are root for 6.0.1?
Sunderwear said:
Yes and yes.
Click to expand...
Click to collapse
So is there any way to root it after this im guessing it will lose unikernel and super su.
Awesome job man. Thank you!
Thw S6 root method works on our Edge. Here is the 925P stock recovery:
https://www.androidfilehost.com/?fid=24438995911976983
nyfl2004 said:
Thw S6 root method works on our Edge. Here is the 925P stock recovery:
https://www.androidfilehost.com/?fid=24438995911976983
Click to expand...
Click to collapse
Uhm why is that needed cant you just put the formware on AP in odin and start
REKTAZOID said:
Uhm why is that needed cant you just put the formware on AP in odin and start
Click to expand...
Click to collapse
Yes, once you odin cf auto root, you need to odin your stock recovery to overwrite the 920F recovery
nyfl2004 said:
Yes, once you odin cf auto root, you need to odin your stock recovery to overwrite the 920F recovery
Click to expand...
Click to collapse
Ok this is not necessary if you dont want to root? Can i just flash the firmware and be done with it because in a few days pingpong root should come for marshmallow
REKTAZOID said:
Ok this is not necessary if you dont want to root? Can i just flash the firmware and be done with it because in a few days pingpong root should come for marshmallow
Click to expand...
Click to collapse
Yes you can
nyfl2004 said:
Yes you can
Click to expand...
Click to collapse
Altight only if i can odin us stuck on checking MD5 then saying please wait and the program is not responding dammit .
REKTAZOID said:
Altight only if i can odin us stuck on checking MD5 then saying please wait and the program is not responding dammit .
Click to expand...
Click to collapse
What are you odining?
nyfl2004 said:
What are you odining?
Click to expand...
Click to collapse
The 6.0 firmware but i just select apn browse select the file and its stuck on please wait.
REKTAZOID said:
The 6.0 firmware but i just select apn browse select the file and its stuck on please wait.
Click to expand...
Click to collapse
It takes a few minutes. Just give it a little longet, it should load.
nyfl2004 said:
It takes a few minutes. Just give it a little longet, it should load.
Click to expand...
Click to collapse
Alright thanks.
REKTAZOID said:
Alright thanks.
Click to expand...
Click to collapse
Anytime
nyfl2004 said:
Thw S6 root method works on our Edge. Here is the 925P stock recovery:
https://www.androidfilehost.com/?fid=24438995911976983
Click to expand...
Click to collapse
how?
what root metod?
can you explain?
first i need what file? and next i used this file https://www.androidfilehost.com/?fid=24438995911976983?
Successful, way smoother now but that hands free activation is not eorking and stuck in the notification bar fix please?
nyfl2004 said:
Thw S6 root method works on our Edge. Here is the 925P stock recovery:
https://www.androidfilehost.com/?fid=24438995911976983
Click to expand...
Click to collapse
REKTAZOID said:
Successful, way smoother now but that hands free activation is not eorking and stuck in the notification bar fix please?
Click to expand...
Click to collapse
the hands free activation the only way i find to fix that is using Debloater and how do you apply the root can you help me?
Much Awaited Nougat for Moto G4 Plus
How to Install
Requirements:
1. need to be in stock rom with latest marshmallow update.(build ending in 139-63)
2. Patience
Steps :
1. Copy the zip file to internal memory
2. Reboot to Recovery(Stock recovery.. Wont work with TWRP)
3. Select Apply update from SdCard
4. Choose the zip file and wait for 20 minutes.
5. Reboot and enjoy
Download from here
mirror thankz to @Shreps
mirror thankz to @Hari haran
Note : If you have modified system or old marshamallow go here and do whats needed. After doing that do the steps written here..
A big thankz to @rahuldude0504 for pulling this ota
This will work only in XT1643 XT1640 XT1642 XT1622 and XT1626
When will it be available official
Work on xt1640 G4 Plus Brazil?????
BeanUzumaki said:
When will it be available official
Click to expand...
Click to collapse
it is official soak test ota..
---------- Post added at 08:57 AM ---------- Previous post was at 08:56 AM ----------
Shenlong55 said:
Work on xt1640 G4 Plus Brazil?????
Click to expand...
Click to collapse
no its only for x1643...indian variant...but u can try...
rahuldude0504 said:
it is official soak test ota..
---------- Post added at 08:57 AM ---------- Previous post was at 08:56 AM ----------
no its only for x1643...indian variant...but u can try...
Click to expand...
Click to collapse
Thx bro, wainting for xt1640
Mine is xt1643...Iam afraid whether I will get ota updates after flashing this file
BeanUzumaki said:
Mine is xt1643...Iam afraid whether I will get ota updates after flashing this file
Click to expand...
Click to collapse
u will because its official file from motorola
will it work if I flash via stock recovery 4
Screenshots please
Gives an error in the recovery --> E3005:"/modem/image/adsp.b00" has unexpected contents
Edit : File is not clearing verification
Pain00556 said:
will it work if I flash via stock recovery
Click to expand...
Click to collapse
The official firmwares/OTA's are flashable ONLY with the stock recovery.
rahulsnair said:
Here is the downloaded link for android N for xt1643.
-- need to be in latest xt1643 stock rom for flashing this
-- This is only for XT1643. Wont work in any other variant.
-- Copy the zip to sdcard
-- reboot to recovery
-- update from sdcard
Download from here
A big thankz to @rahuldude0504 for pulling this ota
Click to expand...
Click to collapse
Hello
Is this is the update for Indian Moto G4 Plus? But what i come accorss is the file name mentioned is
Blur_Version.24.31.64.athene.retail.en.US.zip which seams to be a retail US version.
Has any one tried updating this? Please share the SS
Updated successfully. No flaws running smoothly??
sai444 said:
Updated successfully. No flaws running smoothly����
Click to expand...
Click to collapse
Can you please share the SS after updating?
changes like heating???
Share screenshots after updating
SK Chowadry said:
Can you please share the SS after updating?
Click to expand...
Click to collapse
We can use fingerprint to lock the screen now
Iam afraid that if I didn't get future official update ota..I had the same problem with moto g..after I flashed Lollipop 5.0 in it..I received 5.1 update..but the recovery couldn't fully complete the update process...
OH YEAH
THIS IS GREAT youtube.com/watch?v=pRK8xrMwqYA
rahulsnair said:
Here is the downloaded link for android N for xt1643.
-- need to be in latest xt1643 stock rom for flashing this
-- This is only for XT1643. Wont work in any other variant.
-- Copy the zip to sdcard
-- reboot to recovery
-- update from sdcard
Download from here
A big thankz to @rahuldude0504 for pulling this ota
Click to expand...
Click to collapse
Thanks a lot @rahuldude0504 and @rahulsnair
Updated perfectly fine without hassle on XT1643 :highfive:
Some screenshots for those admiring this thread in a confusion to try or not
BeanUzumaki said:
Iam afraid that if I didn't get future official update ota..I had the same problem with moto g..after I flashed Lollipop 5.0 in it..I received 5.1 update..but the recovery couldn't fully complete the update process...
Click to expand...
Click to collapse
Not to worry more, someday soon after official release which is ofcourse not near (atleast by December) after soak update. We can avail the factory images and flash the official one.
==vj== said:
Thanks a lot @rahuldude0504 and @rahulsnair
Updated perfectly fine without hassle on XT1643 :highfive:
Some screenshots for those admiring this thread in a confusion to try or not
Not to worry more, someday soon after official release which is ofcourse not near (atleast by December) after soak update. We can avail the factory images and flash the official one.
Click to expand...
Click to collapse
I am on stock rom and not rooted. How do I go to stock recovery? Can you help me? Do i need to have custom recovery or root to install this?
Ok guys i could really use some help here. I have a note5 thats running on old rooted software. Im having issues finding a way to update my note to 6.0 so i can flash updated roms. I have search everywhere and cant seem to find any info on how to do this. If it helps im running a stock rooted 5.1 rom with the 3.10.96 SkyHigh Kernel. Plz can some one help me or at least direction me to somewhere.
Grimjello1224 said:
Ok guys i could really use some help here. I have a note5 thats running on old rooted software. Im having issues finding a way to update my note to 6.0 so i can flash updated roms. I have search everywhere and cant seem to find any info on how to do this. If it helps im running a stock rooted 5.1 rom with the 3.10.96 SkyHigh Kernel. Plz can some one help me or at least direction me to somewhere.
Click to expand...
Click to collapse
You need to update through odin.
Download odin to your pc.
Then go here: https://forum.xda-developers.com/tm...eral/stock-n920t-stock-n920tuvu4dpk6-t3518252 and download the firmware.
Put your phone in dl mode (when off, press vol down, home, and power)
Open odin, plug in phone while in dl mode
Click on AP and select the .tar file you downloaded above
Run and your golden!
thanks im updated now
Grimjello1224 said:
thanks im updated now
Click to expand...
Click to collapse
But i think i lost root.
Grimjello1224 said:
But i think i lost root.
Click to expand...
Click to collapse
Yes you probably did, just flash supersu through twrp
---------- Post added at 02:13 AM ---------- Previous post was at 02:10 AM ----------
SpencerA99 said:
Yes you probably did, just flash supersu through twrp
Click to expand...
Click to collapse
heres the link: http://www.supersu.com/download