[GUIDE][XT1643][XT1640][XT1626] How to update to Nougat [Athene][stock][Android N] - Moto G4 Plus Guides, News, & Discussion

Much Awaited Nougat for Moto G4 Plus
How to Install
Requirements:
1. need to be in stock rom with latest marshmallow update.(build ending in 139-63)
2. Patience
Steps :
1. Copy the zip file to internal memory
2. Reboot to Recovery(Stock recovery.. Wont work with TWRP)
3. Select Apply update from SdCard
4. Choose the zip file and wait for 20 minutes.
5. Reboot and enjoy
Download from here
mirror thankz to @Shreps
mirror thankz to @Hari haran
Note : If you have modified system or old marshamallow go here and do whats needed. After doing that do the steps written here..
A big thankz to @rahuldude0504 for pulling this ota
This will work only in XT1643 XT1640 XT1642 XT1622 and XT1626

When will it be available official

Work on xt1640 G4 Plus Brazil?????

BeanUzumaki said:
When will it be available official
Click to expand...
Click to collapse
it is official soak test ota..
---------- Post added at 08:57 AM ---------- Previous post was at 08:56 AM ----------
Shenlong55 said:
Work on xt1640 G4 Plus Brazil?????
Click to expand...
Click to collapse
no its only for x1643...indian variant...but u can try...

rahuldude0504 said:
it is official soak test ota..
---------- Post added at 08:57 AM ---------- Previous post was at 08:56 AM ----------
no its only for x1643...indian variant...but u can try...
Click to expand...
Click to collapse
Thx bro, wainting for xt1640

Mine is xt1643...Iam afraid whether I will get ota updates after flashing this file

BeanUzumaki said:
Mine is xt1643...Iam afraid whether I will get ota updates after flashing this file
Click to expand...
Click to collapse
u will because its official file from motorola

will it work if I flash via stock recovery 4
Screenshots please

Gives an error in the recovery --> E3005:"/modem/image/adsp.b00" has unexpected contents
Edit : File is not clearing verification

Pain00556 said:
will it work if I flash via stock recovery
Click to expand...
Click to collapse
The official firmwares/OTA's are flashable ONLY with the stock recovery.

rahulsnair said:
Here is the downloaded link for android N for xt1643.
-- need to be in latest xt1643 stock rom for flashing this
-- This is only for XT1643. Wont work in any other variant.
-- Copy the zip to sdcard
-- reboot to recovery
-- update from sdcard
Download from here
A big thankz to @rahuldude0504 for pulling this ota
Click to expand...
Click to collapse
Hello
Is this is the update for Indian Moto G4 Plus? But what i come accorss is the file name mentioned is
Blur_Version.24.31.64.athene.retail.en.US.zip which seams to be a retail US version.
Has any one tried updating this? Please share the SS

Updated successfully. No flaws running smoothly??

sai444 said:
Updated successfully. No flaws running smoothly����
Click to expand...
Click to collapse
Can you please share the SS after updating?

changes like heating???

Share screenshots after updating

SK Chowadry said:
Can you please share the SS after updating?
Click to expand...
Click to collapse
We can use fingerprint to lock the screen now

Iam afraid that if I didn't get future official update ota..I had the same problem with moto g..after I flashed Lollipop 5.0 in it..I received 5.1 update..but the recovery couldn't fully complete the update process...

OH YEAH
THIS IS GREAT youtube.com/watch?v=pRK8xrMwqYA

rahulsnair said:
Here is the downloaded link for android N for xt1643.
-- need to be in latest xt1643 stock rom for flashing this
-- This is only for XT1643. Wont work in any other variant.
-- Copy the zip to sdcard
-- reboot to recovery
-- update from sdcard
Download from here
A big thankz to @rahuldude0504 for pulling this ota
Click to expand...
Click to collapse
Thanks a lot @rahuldude0504 and @rahulsnair
Updated perfectly fine without hassle on XT1643 :highfive:
Some screenshots for those admiring this thread in a confusion to try or not
BeanUzumaki said:
Iam afraid that if I didn't get future official update ota..I had the same problem with moto g..after I flashed Lollipop 5.0 in it..I received 5.1 update..but the recovery couldn't fully complete the update process...
Click to expand...
Click to collapse
Not to worry more, someday soon after official release which is ofcourse not near (atleast by December) after soak update. We can avail the factory images and flash the official one.

==vj== said:
Thanks a lot @rahuldude0504 and @rahulsnair
Updated perfectly fine without hassle on XT1643 :highfive:
Some screenshots for those admiring this thread in a confusion to try or not
Not to worry more, someday soon after official release which is ofcourse not near (atleast by December) after soak update. We can avail the factory images and flash the official one.
Click to expand...
Click to collapse
I am on stock rom and not rooted. How do I go to stock recovery? Can you help me? Do i need to have custom recovery or root to install this?

Related

SGH-I337M (TELUS) Update 5.0.1 is out

http://www.sammobile.com/firmwares/download/45755/I337MVLUGOC4_I337MOYAGOC4_TLS/
Before I update my phone, I would like to know if I will be able to use odin to go back to 4.4.2 just in case... thanks
It's not just Telus. Looks like everyone except Rogers has updates available on sammobile.
Any fast download options that are free? Faster than 50 kb/s.
A new version of 4.4.2 just got released too after the 5.0.1 update for all carriers ...
maybe 5.0.1 has bugs ...
http://www.sammobile.com/firmwares/database/SGH-I337M/
Anyone install it ota yet? Is it still multicsc like usual? Does the *#272*IMEI# trick still work?
Lollipop 5.01 update
Will the CF-Auto Root for Canadian models work for this one?
Was able to install via ODIN, upgraded to 5.01, and was able to downgrade back to 4.4.2 via ODIN as well. CF-Auto-root works fine for 5.0.1. It has multi-csc as well.
I was on Goldeneye 51 and decided to Odin the Bell OC4 release in order to update the modem and provide a solid firmware base for Lollipop. I did not find that my version of CF root worked but did re-root by using Odin to flash Philz recovery and then flashing a zip for SuperuserSU 2.4.6 once the custom recovery was in place.
Now I shall wait for the next version of Goldeneye and install after using the vanilla version of the firmware while waiting.
Can you guys please upload to a better file server like Mega? I just spent 7 hours getting 80% from Rapidgator and then it stalled and died.
Anyone knows if the OTA update erase anything on the phone or it just kinda do a ''dirty flash''. I imagine it wouldn't do anything to the sd card but will the data on the device storage be affected?
Galaxy S4 completly stock on Koodo!
Thanks!
sbug206 said:
Can you guys please upload to a better file server like Mega? I just spent 7 hours getting 80% from Rapidgator and then it stalled and died.
Click to expand...
Click to collapse
Uploading now. Will send PM with link when done.
Sn0wHookr said:
Uploading now. Will send PM with link when done.
Click to expand...
Click to collapse
Please PM me your link too. Thanks.
sbug206 said:
Can you guys please upload to a better file server like Mega? I just spent 7 hours getting 80% from Rapidgator and then it stalled and died.
Click to expand...
Click to collapse
saj222 said:
Please PM me your link too. Thanks.
Click to expand...
Click to collapse
PM Sent
Sn0wHookr said:
PM Sent
Click to expand...
Click to collapse
Could I get a link as well please?1
W1zz_ said:
Could I get a link as well please?1
Click to expand...
Click to collapse
PM Sent
Sn0wHookr said:
Was able to install via ODIN, upgraded to 5.01, and was able to downgrade back to 4.4.2 via ODIN as well.
Click to expand...
Click to collapse
Thanks thats all I wanted to know befor flashing... updating atm
EvilDan said:
Thanks thats all I wanted to know befor flashing... updating atm
Click to expand...
Click to collapse
No Problem! I think you will be happy with this release. Best official firmware for the S4 yet. Much smoother then 4.4.2 and the added features of lollipop are great.
Sn0wHookr said:
Uploading now. Will send PM with link when done.
Click to expand...
Click to collapse
I would like to also request a link as well, if possible!
hjkimbrian said:
I would like to also request a link as well, if possible!
Click to expand...
Click to collapse
PM Sent.
Sn0wHookr said:
PM Sent.
Click to expand...
Click to collapse
would appreciate the link for me too...thanks...

[MM][TW]Modem & Bootloader for N910U[UPDATED][9.8.2016]

This is the modem and bootloader of the lastest N910U MM firmware which can ONLY be flashed on N910U devices.
Your warranty is now void. I wont take any responsibility of any human error.
Here is the DOWNLOAD link.
https://drive.google.com/file/d/0B_WW1D1N7xUtNkRETHZSSDNObU0/view?usp=sharing
Procedure of flashing :
1. Download the file from the link above and the attachment below
2. Extract the zip you downloaded
3. Open Odin3 v3.11.1.exe
4. Assign the bootloader file in "BL" and the modem file in "CP"
5. Connect your N910U to computer in Downloading Mode
6. Click "Start" and there you finish
If you have any question, you can reply / PM me and don't hesitate to hit the " Thanks!" button below !!:laugh:
EDIT: minor mistakes made
the file has been reuploaded
EDIT2: Updated from 15/7/16 firmware
EDIT3: Updated from 9/8/16 firmware
Cheers
chantak said:
This is the modem and bootloader of the lastest N910U MM firmware which can ONLY be flashed on N910U devices.
Your warranty is now void. I wont take any responsibility of any human error.
Here is the DOWNLOAD link.
https://drive.google.com/open?id=0B_JWkEWQ6KIiUDNRcTlrQzRWTTg
Procedure of flashing :
1. Download the file from the link above and the attachment below
2. Extract the zip you downloaded
3. Open Odin3 v3.10.7.exe
4. Assign the bootloader file in "BL" and the modem file in "CL"
5. Connect your N910U to computer in Downloading Mode
6. Click "Start" and there you finish
If you have any question, you can reply / PM me and dont hesitate to hit the " Thanks!" button below !!:laugh:
Click to expand...
Click to collapse
Thank you .
I've been looking for this. Thanks bro!
can anyone share N910U stock kernel plz
djmax81 said:
can anyone share N910U stock kernel plz
Click to expand...
Click to collapse
https://drive.google.com/open?id=0B_JWkEWQ6KIiWFFXREVubldwaFU
here you go
chantak said:
https://drive.google.com/open?id=0B_JWkEWQ6KIiWFFXREVubldwaFU
here you go
Click to expand...
Click to collapse
THIS IS NOT WORKING !!! BINARY ERROR, NOT THRU ODIN ATLEAST !!! :s
N910UXXU2DPC2 Modem +BootLoader Odin .md5
Working :
Modem : https://www.dropbox.com/s/2en5t81tp73w3db/modem.tar.md5?dl=0
BootLaoder https://www.dropbox.com/s/3mqn9z4y8kh6f1i/sboot.tar.md5?dl=0
---------- Post added at 08:52 PM ---------- Previous post was at 08:10 PM ----------
truenitos said:
THIS IS NOT WORKING !!! BINARY ERROR, NOT THRU ODIN ATLEAST !!! :s
Click to expand...
Click to collapse
Check i have posted working BL and Modem
Thanks mate
truenitos said:
Thanks mate
Click to expand...
Click to collapse
yeah i found the mistakes
i updated the post and the file before ur reply
plz check agaain
chantak said:
yeah i found the mistakes
i updated the post and the file before ur reply
plz check agaain
Click to expand...
Click to collapse
No need ! but its already linked with mine
so all good now
the procedure is: flash rom + flash kernel (suemax) + Modem Odin. True?
Hi
Can it work with (910C)
If not, could anyone tel me where could I find it.
Thank u
miangelgabriel said:
the procedure is: flash rom + flash kernel (suemax) + Modem Odin. True?
Click to expand...
Click to collapse
noise fix by not-i
u can find it in suemax kernel thread
---------- Post added at 07:03 AM ---------- Previous post was at 07:01 AM ----------
yagahrhm said:
Hi
Can it work with (910C)
If not, could anyone tel me where could I find it.
Thank u
Click to expand...
Click to collapse
N910C doesn't need separate flashing of bootloader and modem
beacuse all the roms are base on N910C base
so u just flash rom for ur N910C with kernel of ur choice
there are many options like talexop , H vitamin , suemax
Best to change "CL" to "CP" in the instructions
NZCloud said:
Best to change "CL" to "CP" in the instructions
Click to expand...
Click to collapse
sorry for the typo:highfive:
corrected btw
This is a bootloader for MM.
May i be able to downgrade to 4.4.4 if someone can offer me a 4.4.4 bootloader?
Anyway to downgrade to 4.4.4, please?
godel.chen said:
This is a bootloader for MM.
May i be able to downgrade to 4.4.4 if someone can offer me a 4.4.4 bootloader?
Anyway to downgrade to 4.4.4, please?
Click to expand...
Click to collapse
since bootloader of firmware since 5.1.1 is mostly locked
you can try your luck
but most likely it would fail even if u have the kitkat bootloader.
cheers
chantak said:
since bootloader of firmware since 5.1.1 is mostly locked
you can try your luck
but most likely it would fail even if u have the kitkat bootloader.
cheers
Click to expand...
Click to collapse
Many thanks.
Still seeking a way to get back to 4.4.4, i have another N910U on 4.4.4.
This N910U on 5.0.1 was returned from maintenance service since it's no longer get signals from telecom, and had motherboard replaced.
Both of them were on 4.4.4, now i have one in 5.0.1...
One of my app won't run on 5.0.1.
It's a big trouble for me...
Don't have kitkat bootloader, either.
Headache...
So I flashed Hani's MM rom while using the BL and modem here. Both flash successfully through Odin but I'm still having the no sim issue and baseband isn't detected, so I'm wondering if there's another way to get the modem working.
Thanks!
Velathawen said:
So I flashed Hani's MM rom while using the BL and modem here. Both flash successfully through Odin but I'm still having the no sim issue and baseband isn't detected, so I'm wondering if there's another way to get the modem working.
Thanks!
Click to expand...
Click to collapse
its related to the kernel embedded in the Hani's ROM
what u can do is flashing the kernel made by Suemax/just wait til the update of his rom that can fix the issue

Unable to install any ROMs via TWRP on my Z5 E6653 - Error messages

Hi all,
I recently rooted my Z5 and then the OTA Xperia updates kept failing. I then looked into why this maybe happening and to cut a long story short, every ROM i've tried, starts to load via TWRP and then blue text says 'error executing updater binary in zip' etc
I am copying the zip files over to my SD card.
Please help
try disabling signature verification....
YasuHamed said:
try disabling signature verification....
Click to expand...
Click to collapse
Hi, Thanks but I did do that too :/
i_amphotophil said:
Hi, Thanks but I did do that too :/
Click to expand...
Click to collapse
you cannot install just any rom by the twrp
tell me who did you install twrp?
from twrp site? or is it stock modified kernel! ?
please provide details
YasuHamed said:
you cannot install just any rom by the twrp
tell me who did you install twrp?
from twrp site? or is it stock modified kernel! ?
please provide details
Click to expand...
Click to collapse
Hi, thanks for the reply. I can;t remember, I'd imagine from this site? I've just checked and the version is 2.8... so should I update or would that not make a difference?
Please explain which version you are on now, what rom you're flashing?
Sent from my E6683 using Tapatalk
Maybe You are using the false twrp
---------- Post added at 07:32 PM ---------- Previous post was at 07:30 PM ----------
http://forum.xda-developers.com/xperia-z5/development/twrp-3-0-2-cm-aosp-roms-t3373008/page3
i_amphotophil said:
Hi, thanks for the reply. I can;t remember, I'd imagine from this site? I've just checked and the version is 2.8... so should I update or would that not make a difference?
Click to expand...
Click to collapse
you cannot Flash Z5p using twrp2.8! please follow proper rooting method!
flash stock .305 (original)
then flash it with modified Kernel
i have simplified it here for u
http://forum.xda-developers.com/z5-...hod-32-2-0-t3496112/post69532476#post69532476
http://forum.xda-developers.com/xperia-z5/development/twrp-3-0-2-cm-aosp-roms-t3373008
if you're trying to flash AOSP or CM based ROMs (MM), also works for stock ROMs
Nougat needs updated TWRP and recovery
zacharias.maladroit said:
http://forum.xda-developers.com/xperia-z5/development/twrp-3-0-2-cm-aosp-roms-t3373008
if you're trying to flash AOSP or CM based ROMs (MM), also works for stock ROMs
Nougat needs updated TWRP and recovery
Click to expand...
Click to collapse
Fixed it! Many many thanks for you help! I just installed this version of TWRP and the PA rom and sorted. Phew"

[Captured OTA]Nougat OTA for Moto G4 Plus - XT1643 India

Hi All - I have managed to capture the OTA Zip file for MotoG4 Plus India edition (XT1643)
I have been running in this version for last two days and haven't faced any issues.
Guess Moto/ Lenovo has done a good job here.
OTA Link:
https://drive.google.com/file/d/0Bz4VlDySg4OlQTRTX0ljWTUweHc/view?usp=drivesdk
Jeash
Thanks for your work. Will it work in XT1642?
EvilHowl said:
Thanks for your work. Will it work in XT1642?
Click to expand...
Click to collapse
I am not sure, XT1643 is the phone I have. Don't have a chance to check it on others
Obviously it will work on same devices as the first soak test
Sent from my Moto G (4) using Tapatalk
kosmasgr said:
Obviously it will work on same devices as the first soak test
Sent from my Moto G (4) using Tapatalk
Click to expand...
Click to collapse
I think it too haha, I'm going to try.
Chk and report build no...
EvilHowl said:
I think it too haha, I'm going to try.
Click to expand...
Click to collapse
You have XT1622 right ?
Sent from my Moto G (4) using Tapatalk
The file size is smaller than the file named identical from other source. This one is 750648 kB, the other one is 867448 kB.
The name suggest this is the older SOAK:
http://forum.xda-developers.com/moto-g4-plus/how-to/xt1643-ota-nougat-t3483943
kosmasgr said:
You have XT1622 right ?
Sent from my Moto G (4) using Tapatalk
Click to expand...
Click to collapse
Nope, I have Moto G4 Plus retail from Europe (Spain), XT1642
---------- Post added at 09:54 ---------- Previous post was at 09:53 ----------
SoNic67 said:
The file size is smaller than the file named identical from other source. This one is 750648 kB, the other one is 867448 kB.
The name suggest this is the older SOAK:
http://forum.xda-developers.com/moto-g4-plus/how-to/xt1643-ota-nougat-t3483943
Click to expand...
Click to collapse
****... It's right...
Someone have tried?
SoNic67 said:
The file size is smaller than the file named identical from other source. This one is 750648 kB, the other one is 867448 kB.
The name suggest this is the older SOAK:
http://forum.xda-developers.com/moto-g4-plus/how-to/xt1643-ota-nougat-t3483943
Click to expand...
Click to collapse
I captured thisfrom the OTA update that was pushed to my phone. Not sure of other files out there
I am not putting SOAK on my phone, sorry.
The previous SOAK (name identical, larger size) was reporting a lower build number:
It's just curious that it has the same filename even if is obviously a different file.
Simple question: has anyone sideloaded it over soak test NPJ 25.75-2?
Coz I don't wanna downgrade right now. So is it ok if I side load it over soak?
Not working.
E3005: "/modem/image/modem.b00" has unexpected contents.
Status 7.
FIXED: I messed up with older modem images
cool_sid said:
Simple question: has anyone sideloaded it over soak test NPJ 25.75-2?
Coz I don't wanna downgrade right now. So is it ok if I side load it over soak?
Click to expand...
Click to collapse
It will works only for MPJ24.139-63 and MPJ24.139-63, so you have to downgrade if you're on previous soak.
vache said:
It will works only for MPJ24.139-63 and MPJ24.139-63, so you have to downgrade if you're on previous soak.
Click to expand...
Click to collapse
@vache - Do you know the numbering system of the moto OTA? Is this another soak or the real deal? Why the file is called the same as previous soak?
vache said:
It will works only for MPJ24.139-63 and MPJ24.139-63, so you have to downgrade if you're on previous soak.
Click to expand...
Click to collapse
So, it will work by flashing stock mpj24.139-63 only or I have to relock Boot loader again by flashing stock mm.
I'm in confusion. Also Please suggest that should I flash gpt and bootloader during downgrade operation or flash everything except these two.
My phone is xt1643 2/16 GB. running cm 14.1
SoNic67 said:
@vache - Do you know the numbering system of the moto OTA? Is this another soak or the real deal? Why the file is called the same as previous soak?
Click to expand...
Click to collapse
No ideas :/
Made a boot/system TWRP backup :
http://vache.cloudapp.net/G4/tmp/TWRP_BACKUP/
https://dl.vache-android.com/athene/Firmwares/TWRP_BACKUP/
TWRP - I guess the modem files will have to be flashed separately based on our models?
jeash said:
Hi All - I have managed to capture the OTA Zip file for MotoG4 Plus India edition (XT1643)
I have been running in this version for last two days and haven't faced any issues.
Guess Moto/ Lenovo has done a good job here.
OTA Link:
https://drive.google.com/file/d/0Bz4VlDySg4OlQTRTX0ljWTUweHc/view?usp=drivesdk
Jeash
Click to expand...
Click to collapse
md5sum plz
SoNic67 said:
TWRP - I guess the modem files will have to be flashed separately based on our models?
Click to expand...
Click to collapse
FSG : http://vache.cloudapp.net/G4/tmp/fsg_11.mbn
Modem : http://vache.cloudapp.net/G4/tmp/modem_11.mbn

[29/12/16] Nougat OTA-XT1644-24.31.64-25.11.12.athene zip download

Captured from official Nougat OTA for XT1644-02 (dual sim) released today (29/12/16)
Enjoy!
---
ota-Blur_Version.24.31.64-25.11.12.athene.retail.en.US.zip
MD5: af0af16fbed2880f3a4980ec3383f261
OTA details
Mirror 1
Mirror 2
Thanks
Is it the same version as latest soak?
EvilHowl said:
Is it the same version as latest soak?
Click to expand...
Click to collapse
This is the final official nougat build that was released today for all devices. Read the OPs post.
Probably yes. I tried to install it over soak test, but no luck.
Our only chance to avoid downgrading is someone to upload the second soak test.
I tried to install it but im getting a error (error 7 or something like that)
lapocha5 said:
I tried to install it but im getting a error (error 7 or something like that)
Click to expand...
Click to collapse
Same
lapocha5 said:
I tried to install it but im getting a error (error 7 or something like that)
Click to expand...
Click to collapse
This is OTA for the Indian dual SIM variant, updated the main post as well so that users don't confuse.
Anyone know if work on XT1641?
(Sorry my english)
Sent from my Moto G (4) using XDA-Developers mobile app
Hi guys please have some news about the update for Brazilian device XT 1640
archish said:
This is OTA for the Indian dual SIM variant, updated the main post as well so that users don't confuse.
Click to expand...
Click to collapse
Oks, thanks for the heads up
archish said:
This is OTA for the Indian dual SIM variant, updated the main post as well so that users don't confuse.
Click to expand...
Click to collapse
It should work in the same devices that soak test worked right?
It is .retail.en.US like soak tests were
Anyone tried to flash it over previous soak ota? My bulid no is NPJ25.75-2... What is official one's build no?Any problem if I flash it over previous ota?
why is it called ota-Blur_Version.24.31.64-25.11.12.athene.retail.en.US.zip if it's for Indian version?
Anyone share it's have what build no. 93.11or 93.12
archish said:
Captured from official Nougat OTA for XT1644-02 (dual sim) ]
Click to expand...
Click to collapse
Bro is it recovery flashable file ?
staknhalo said:
why is it called ota-Blur_Version.24.31.64-25.11.12.athene.retail.en.US.zip if it's for Indian version?
Click to expand...
Click to collapse
It always says that I think. en-US simply means it is US English.
EvilHowl said:
Is it the same version as latest soak?
Click to expand...
Click to collapse
Yes.
Attempting sideloading on a XT1644 SS US Retaill, I have MPJ24.139-64/65 and this OTA is not working as the previous Soak. So it seems to be working only for Indian users, US Retail will have to wait until Motorola releases the correct update file.
No luck installing on USA XT1644, error 7

Categories

Resources