G930T1 Metro PCs can it be flashed with G930T Firmware? - T-Mobile Samsung Galaxy S7 Questions & Answers

Hi fellas, so i got a Metro Pcs GS7, but i'm kind of obsessive and it bothers me a lot having a device not meant for my carrier (T-Mobile), tried to flash T-Mobile G930T Firmware via odin, but it gave me an error at the end, so i flashed back G930T1 flash, any suggestions?
Appreciated!

Always could with any other Samsung' between the 2 carriers
Except that the locked bootloader on both carriers devices may cause a issue if you Odin one or the other .Its worth a try all it will do is fail if not .But i did this on metro s5 s4 and s6
Sent from my Nexus 6 using XDA Free mobile app

It should work with no problems. I had a Sprint S7 and flashed T-mobile firmware to use on TMO and its been working great. All the US S7's are pretty much all the same except for the firmwares. So they should be fine.

Yes you can ... i have done couple with no issue make sure to check your download it might be bad ...

How did you do it cause there's no working T-Mobile firmware online right now all of them give you an error message.

JUSMEJOSE said:
Yes you can ... i have done couple with no issue make sure to check your download it might be bad ...
Click to expand...
Click to collapse
Can you please provide a link to the firmware you used to flash the s7 please? Thanks?
Sent from my SM-G930T1 using XDA-Developers mobile app

stylin350 said:
It should work with no problems. I had a Sprint S7 and flashed T-mobile firmware to use on TMO and its been working great. All the US S7's are pretty much all the same except for the firmwares. So they should be fine.
Click to expand...
Click to collapse
In the USA, the European version has a Exynos SOC.
Sent from my SM-G930T using Tapatalk

JUSMEJOSE said:
Yes you can ... i have done couple with no issue make sure to check your download it might be bad ...
Click to expand...
Click to collapse
Can you provide with link to firmware that you use?
Sent from my SM-G930T1 using XDA-Developers mobile app

romeodeed said:
How did you do it cause there's no working T-Mobile firmware online right now all of them give you an error message.
Click to expand...
Click to collapse
Try this one:
https://www.dropbox.com/s/gvi7ihtmfej7ke6/G930TUVS2APB8_Stock.rar?dl=0
I just flashed my Metro S7 with this Tmobile flash and it worked,
Odin BL,AP,CP, and CSC and Voila!!!!!

I went to best buy the Samsung rep did it for me, I tried to do it like I did with my s5,s6 from Metro and the file was corrupted

So ifi flash this on my metro phone, will a metro unlock via unlock all carry over to the T-Mobile version? Will it get T-Mobile update?

Atrix_Lover said:
Hi fellas, so i got a Metro Pcs GS7, but i'm kind of obsessive and it bothers me a lot having a device not meant for my carrier (T-Mobile), tried to flash T-Mobile G930T Firmware via odin, but it gave me an error at the end, so i flashed back G930T1 flash, any suggestions?
Appreciated!
Click to expand...
Click to collapse
hey my friend i had no trouble flashing tmobile firmware, but when i did i had trouble unlocking afterwards, could you send me a link to the metro pcs firmware, i would gladly send you a link for the tmobile, im uploading the file to my google drive account as i text this, its about 4gb , so will take a couple hours to upload

It works like a charm. I think it even unlocked the phone? My phone accepts T-Mobile sims without issue.

romeodeed said:
How did you do it cause there's no working T-Mobile firmware online right now all of them give you an error message.
Click to expand...
Click to collapse
I used the method on galaxy7root.com . At the top of the page click root Qualcomm and everything you need is there.
---------- Post added at 08:19 PM ---------- Previous post was at 08:15 PM ----------
Commented on the wrong post sorry

How can I flash the G930U firmware onto the G930T? Is it possible? I'm sorry, I've been out of the scene for a while.

Is it really worth rooting my phone to flash the T-Mobile ROM to get faster updates and have advanced messaging?

Atrix_Lover said:
Hi fellas, so i got a Metro Pcs GS7, but i'm kind of obsessive and it bothers me a lot having a device not meant for my carrier (T-Mobile), tried to flash T-Mobile G930T Firmware via odin, but it gave me an error at the end, so i flashed back G930T1 flash, any suggestions?
Appreciated!
Click to expand...
Click to collapse
change the sales code to metro..then it should work fine

stillwiggin said:
change the sales code to metro..then it should work fine
Click to expand...
Click to collapse
How do you change the sales code, I'm getting ready to do this right now actually. Tired of the boring MetroPCS **** lol

G930T1 Metro
Please tell me how I can put the Russian language G930T1 Metro

Related

My official sgh-m919v thread about rooting and backup.

I'm Just sharing with people that got this phone and doesn't know where to look for useful information's.
This model look's like a variant of the T-mobile model SGH-M919V
I was able to root my model SGH-M919V by following this link: http://forum.xda-developers.com/showthread.php?t=2258633. All credit goes to them. Not to me.
i also installed Goomanager http://forum.xda-developers.com/showthread.php?t=2263001. All credit goes to them. Not to me.
I did a backup of everything with the TWRP. I will link the backup here.
this backup gave me an archive of 2.47*Go (2,655,360,375 octets) uncompressed.
Doing *#1234# give me this result.
AP: M919VVLUAMDC
CP: M919VVLUAMDC
CSC: M919VYVLAMDC
If you have more information's for this phone, post them here.
I also own this one.
Comes from Videotron (Quebec, Canada).
Wind m919v
Same on WIND Mobile
Sosolyte said:
I'm Just sharing with people that got this phone and doesn't know where to look for useful information's.
This model look's like a variant of the T-mobile model SGH-M919V
I was able to root my model SGH-M919V by following this link: http://forum.xda-developers.com/showthread.php?t=2258633. All credit goes to them. Not to me.
i also installed Goomanager http://forum.xda-developers.com/showthread.php?t=2263001. All credit goes to them. Not to me.
I did a backup of everything with the TWRP. I will link the backup here.
this backup gave me an archive of 2.47*Go (2,655,360,375 octets) uncompressed.
Doing *#1234# give me this result.
AP: M919VVLUAMDC
CP: M919VVLUAMDC
CSC: M919VYVLAMDC
If you have more information's for this phone, post them here.
Click to expand...
Click to collapse
Hi Sosolyte! Can you please upload your stock firmware backup?
Thanks!
canflip said:
Hi Sosolyte! Can you please upload your stock firmware backup?
Thanks!
Click to expand...
Click to collapse
Someone know where i can upload a file of 1.6Gb-2.0Gb? so far i have to split it on hotfile...
Hi guys I have a question how van I downgrade my galaxyi did the update ota may 7 .
Want to downgrade so I can use this method to root my phone thanks guys
Sent from my SGH-M919 using xda premium
ferlogan said:
Hi guys I have a question how van I downgrade my galaxyi did the update ota may 7 .
Want to downgrade so I can use this method to root my phone thanks guys
Sent from my SGH-M919 using xda premium
Click to expand...
Click to collapse
I don't understand why this thread is in the AT&T forum, but anyway as to your question, go to either http://www.sammobile.com/firmwares/ (you have to register to download) and enter SGH-M919 in the search box or go to http://samsung-updates.com/device/?id=SGH-M919 and download the firmware for your phone. This is version M919UVUAMDL which should be the pre-ota version. Flash with Odin.
creepyncrawly said:
I don't understand why this thread is in the AT&T forum, but anyway as to your question, go to either http://www.sammobile.com/firmwares/ (you have to register to download) and enter SGH-M919 in the search box or go to http://samsung-updates.com/device/?id=SGH-M919 and download the firmware for your phone. This is version M919UVUAMDL which should be the pre-ota version. Flash with Odin.
Click to expand...
Click to collapse
this is not the same number. Someone told me it would not work at all.
Sosolyte said:
this is not the same number. Someone told me it would not work at all.
Click to expand...
Click to collapse
I'm not quite sure what you mean. Not the same number as what? I understood @ferlogan wanted to downgrade to original firmware so he can use the motochopper root method.
The firmware I linked is taken right off of the Samsung Kies servers, and since the phones are so new, it will be the original firmware that is on the phone when the phone comes out of the box. I don't have your phone, or carrier, as I'm still on SGH-I777 and AT&T. But you should be able to verify in the T-Mo forum that the version number is the same as the original firmware. The version number for the ota update will be slightly different.
I think he mean to say that the number you put is for SGH M919 (T-mobile version) and we are on canadian Videotron or wind which is SGH-M919V and doing *#1234# give a different version M919VV....
I am also in same boat I want to know which firmware to downlaod to downgrade in order to Root my videotron canadian version, I don't want to brick my phone.
Netuser said:
I think he mean to say that the number you put is for SGH M919 (T-mobile version) and we are on canadian Videotron or wind which is SGH-M919V and doing *#1234# give a different version M919VV....
I am also in same boat I want to know which firmware to downlaod to downgrade in order to Root my videotron canadian version, I don't want to brick my phone.
Click to expand...
Click to collapse
This is so awesome, i just brick my phone and not a little brick i think. the internal storage show me 0M used. I rebooted the phone and now i cant reach odin or TWRP... awesome.....
I will bring it back to my carrier for an exchange.
Sosolyte said:
This is so awesome, i just brick my phone and not a little brick i think. the internal storage show me 0M used. I rebooted the phone and now i cant reach odin or TWRP... awesome.....
I will bring it back to my carrier for an exchange.
Click to expand...
Click to collapse
So you can't even get the phone into download mode now?
Its volume down + power + home. Then plug it into the pc and run Odin. If it shows up on one of the COMs then you're good to go.
Sent from my SGH-M919V using Tapatalk 4 Beta
dj_aj said:
So you can't even get the phone into download mode now?
Its volume down + power + home. Then plug it into the pc and run Odin. If it shows up on one of the COMs then you're good to go.
Sent from my SGH-M919V using Tapatalk 4 Beta
Click to expand...
Click to collapse
yeah i was able to bring it back to original state with the official rom and it even show offical rom in the odin menu now. the only problem i got now is, when i connect kit to wireless network, my speedtest is around .3Mbps and .34 for the upload.
The rom i used is the one available in sammobile and it not exactly the same number as before. Even with Skies it upgraded to this version and it so slow on my network now.
Sosolyte said:
This is so awesome, i just brick my phone and not a little brick i think. the internal storage show me 0M used. I rebooted the phone and now i cant reach odin or TWRP... awesome.....
I will bring it back to my carrier for an exchange.
Click to expand...
Click to collapse
how did you brick it?
I too have a SGH-M919V, mine is with Wind Mobile and I just recently got it.
I am assuming there are no stable or compatible roms with this model yet? I want to try rooting it how you did it and then I suppose wait for a stable rom. I'm anxious that our model isn't on sammobile.. yet.
Just curious, is yours also with Wind Mobile? my AP, CP, and CSC came up with the same numbers.
I wish there was more information and light on this particular model, thank you for having this thread.
PwnPhone said:
how did you brick it?
I too have a SGH-M919V, mine is with Wind Mobile and I just recently got it.
I am assuming there are no stable or compatible roms with this model yet? I want to try rooting it how you did it and then I suppose wait for a stable rom. I'm anxious that our model isn't on sammobile.. yet.
Just curious, is yours also with Wind Mobile? my AP, CP, and CSC came up with the same numbers.
I wish there was more information and light on this particular model, thank you for having this thread.
Click to expand...
Click to collapse
Some of the other users and I have another thread going that has some of the information that you are looking for. Our phone does have stock odin flashable firmware and it is on sammobile / samfirmware now.
Here's the thread: http://forum.xda-developers.com/showthread.php?t=2303384
Which version of TWRP did you flash to your 919V? The one suggested by Goo Manager? It suggests Generic Canadian usually used in 337 phones. Or T-mobile for 919?
SGH=M919V
nologg said:
I also own this one.
Comes from Videotron (Quebec, Canada).
Click to expand...
Click to collapse
Where you able to root it. I'm also with videotron and can't seem to find a root that works anywhere
Requesting GS4 Canada WIND root links.
My GS4 is CANADA WIND variant (SGH-M919V) with build number "KOT49H.M919VVLUFNE1" running KitKat 4.4.2. I'm struggling to find root files for my device? Can anyone help me out with links perhaps?
Samsung S4 SGH-M919V
Hey Guys!
First Post here, sorry if I get anything wrong. But I was having some difficulties finding a way to root my phone. I want to have my phone rooted so I can download some root only apps and that's it. Nothing fancy. However I found that there a few different threads for rooting and me being nervous I don't want to brick my phone. It would be great if you guys could point me in the right direction. TL;DR I have an unlocked Mobilicity SGH-M919V Samsung Galaxy S4 and I dont know to follow the Canadian Thread or the SGH-M919 Thread.
BaseBand/AP/CP: M919VVLUFNE1
Kernel Version: 3.4.0-1529758
CSC: M919VYVLFNE2
Also Motochopper did not work for me.
Thanks Guys!!!!!!!!
MobilicityProbs said:
Hey Guys!
First Post here, sorry if I get anything wrong. But I was having some difficulties finding a way to root my phone. I want to have my phone rooted so I can download some root only apps and that's it. Nothing fancy. However I found that there a few different threads for rooting and me being nervous I don't want to brick my phone. It would be great if you guys could point me in the right direction. TL;DR I have an unlocked Mobilicity SGH-M919V Samsung Galaxy S4 and I dont know to follow the Canadian Thread or the SGH-M919 Thread.
BaseBand/AP/CP: M919VVLUFNE1
Kernel Version: 3.4.0-1529758
CSC: M919VYVLFNE2
Also Motochopper did not work for me.
Thanks Guys!!!!!!!!
Click to expand...
Click to collapse
Try the chainfire autoroot + odin using the tmobile file. It worked like a charm for me using the latest NH3 firmware released
Cheers:highfive:

How To flash N920P with international firmware version?

I'm trying to flash Sprints N920P with any international unbranded firmware. phone is rooted, TWRP already installed and OEM unlocked.
Tried to flash N920CXXU1AOI3_N920COXE1AOI3_SER with odin but failed.
could you please give me any advise? There should be a solution because its hardware is same for every region or carrier.
best regards,
Zaza
seeking for the same solutioN!
Not sure why you would want to do this. If you can get the phone unlocked then whats the point?
DarkManX4lf said:
Not sure why you would want to do this. If you can get the phone unlocked then whats the point?
Click to expand...
Click to collapse
my Galaxy Note 5 "SM-N920P" sprint version is unlocked.. i live in Bangladesh! your neighbour! i can use a local sim without any problem... but stil.. as i'm in asia.. shouldn't i be using an international rom??? plus... my theme store isn' working! when I long press in desktop and select themes.. nothing happens! maybe it's because i'm using that sprint version in asia! :/
sahed01 said:
my Galaxy Note 5 "SM-N920P" sprint version is unlocked.. i live in Bangladesh! your neighbour! i can use a local sim without any problem... but stil.. as i'm in asia.. shouldn't i be using an international rom??? plus... my theme store isn' working! when I long press in desktop and select themes.. nothing happens! maybe it's because i'm using that sprint version in asia! :/
Click to expand...
Click to collapse
Hmm not sure about the theme store but you don't need to use an international rom. You can use a Sprint rom. Although all Note 5's are essentially the same (there might be some variants with differences), the kernel might be different for each. I would stick with the Sprint rom. Maybe try some of the roms posted in the development section to see if the theme store would work on those roms.
DarkManX4lf said:
Hmm not sure about the theme store but you don't need to use an international rom. You can use a Sprint rom. Although all Note 5's are essentially the same (there might be some variants with differences), the kernel might be different for each. I would stick with the Sprint rom. Maybe try some of the roms posted in the development section to see if the theme store would work on those roms.
Click to expand...
Click to collapse
thanks for your response!
btw//.. i'm downloading this tom "http://forum.xda-developers.com/tmobile-galaxy-note5/development/rom-darthstalker-note5-version-1-aroma-t3212091" and there is a interesting thing i found here.. in the discreption section they said that
"DEVICE MODEL OPTIONS
- Now Users Can Choose Their Device's Phone Model Right From The Aroma Installer.
CSC CARRIER/REGION OPTIONS
- Now Users Can Choose Their Country Sales Code (CSC) Right From The Aroma Installer"
does that mean i can now change my unlocked "SM-N920P" "Sprint" to international "SM-N920I" wow.. that would be soooo cooollll!!!! :')
Please inform us if you will have success.
Regards,
Zaza
sahed01 said:
thanks for your response!
btw//.. i'm downloading this tom "http://forum.xda-developers.com/tmobile-galaxy-note5/development/rom-darthstalker-note5-version-1-aroma-t3212091" and there is a interesting thing i found here.. in the discreption section they said that
"DEVICE MODEL OPTIONS
- Now Users Can Choose Their Device's Phone Model Right From The Aroma Installer.
CSC CARRIER/REGION OPTIONS
- Now Users Can Choose Their Country Sales Code (CSC) Right From The Aroma Installer"
does that mean i can now change my unlocked "SM-N920P" "Sprint" to international "SM-N920I" wow.. that would be soooo cooollll!!!! :')
Click to expand...
Click to collapse
sahed01 said:
thanks for your response!
btw//.. i'm downloading this tom "http://forum.xda-developers.com/tmobile-galaxy-note5/development/rom-darthstalker-note5-version-1-aroma-t3212091" and there is a interesting thing i found here.. in the discreption section they said that
"DEVICE MODEL OPTIONS
- Now Users Can Choose Their Device's Phone Model Right From The Aroma Installer.
CSC CARRIER/REGION OPTIONS
- Now Users Can Choose Their Country Sales Code (CSC) Right From The Aroma Installer"
does that mean i can now change my unlocked "SM-N920P" "Sprint" to international "SM-N920I" wow.. that would be soooo cooollll!!!! :')
Click to expand...
Click to collapse
I am not quite sure. You are better off asking the question in thread for that ROM.
DarkManX4lf said:
I am not quite sure. You are better off asking the question in thread for that ROM.
Click to expand...
Click to collapse
i tried to flash "SM-N920I" in my phone with odin. but it fails every time! I guess that's obvious! :'(
anyway.. can you help me with kernel!? which should I be using for best result??
zazabichi said:
I'm trying to flash Sprints N920P with any international unbranded firmware. phone is rooted, TWRP already installed and OEM unlocked.
Tried to flash N920CXXU1AOI3_N920COXE1AOI3_SER with odin but failed.
could you please give me any advise? There should be a solution because its hardware is same for every region or carrier.
best regards,
Zaza
Click to expand...
Click to collapse
so this happened..
when i tried to change my unlocked "SM-N920P" "Sprint" to international "SM-N920I" is fails with odin.. no matter how hard i try.. then i flashed a custom rom from T-mobile thread drom here.. and i lost my imei .. then flashed another custom rom from sprint section.. and it came back to normal..
This site helps me out a lot when I run into trouble http://galaxynote5root.com/note-5-stock-firmwares/
sahed01 said:
so this happened..
when i tried to change my unlocked "SM-N920P" "Sprint" to international "SM-N920I" is fails with odin.. no matter how hard i try.. then i flashed a custom rom from T-mobile thread drom here.. and i lost my imei .. then flashed another custom rom from sprint section.. and it came back to normal..
Click to expand...
Click to collapse
So it means now you have Stock T-mobile firmware?
Could you please provide us screenshot of firmware versions and a link to this T-mobile Rom thread?
Cheers,
Zaza
zazabichi said:
So it means now you have Stock T-mobile firmware?
Could you please provide us screenshot of firmware versions and a link to this T-mobile Rom thread?
Cheers,
Zaza
Click to expand...
Click to collapse
nope. i have flashed "sprint" custom rom!
Thing about sprint is...it has its own network. So unlocking it is not the same as tmobile and other networks. Example 1, sprint unlocked only works on sprinit network and other networks by sprint. Example 2, any other company, tmobile, verizion, unlocked can work with a different sim card, internationally. If you put a different sim card in the sprint phone it wont work for some reason, but any nonesprint phone it does if unlocked
This is not true. The N920P can be unlocked and used on domestic GSM carriers. I'm currently using the N920P on straight talk (ATT) with LTE on stock/rooted rom.
Hey insane howd you get 4g? On att?and are there any good roms for sprint note 5 with att
insanecain said:
This is not true. The N920P can be unlocked and used on domestic GSM carriers. I'm currently using the N920P on straight talk (ATT) with LTE on stock/rooted rom.
Click to expand...
Click to collapse
Tell please how you did it
You should just flash a rom with custom recovery. odin to hit or miss for me unless I'm going complete stock
insanecain said:
This is not true. The N920P can be unlocked and used on domestic GSM carriers. I'm currently using the N920P on straight talk (ATT) with LTE on stock/rooted rom.
Click to expand...
Click to collapse
How you did it?
I used idoneapps for the unlock (works great, kudos to those guys) .You will have to make NV changes for LTE (directions are on this site). You also need two APN's (one with LTE as bearer). Network Mode needs to be GSM/WCDMA/LTE. Handcent with manual APN for MMS keeps from having to reboot nearly everytime you receive an MMS as well.
---------- Post added at 09:01 AM ---------- Previous post was at 08:44 AM ----------
NV edits can be found http://forum.xda-developers.com/showpost.php?p=56577252&postcount=455 . You do not need the storage patch for this device, obviously.

Need assistance on upgrading to Nougat

Hey Team,
I have a S7 that is unlocked but originally from CWW (Jamaica). I have yet to receive the Nougat update. I am using the phone on Virgin Mobile and I am in Canada. How do I go about getting the Nougat update? I tried Manual update from settings, no luck. Tried Smart Switch and no luck..
Change the CSC? If so can someone please provide me a walk through in doing so.
Update: I followed these intructions and was successful in flashing that firmware.
https://forum.xda-developers.com/galaxy-s7/how-to/nougat-samsung-pay-step-step-guide-t3544582
Now how do I get the Virgin firmware on the phone?
Thank You
salin235 said:
Now how do I get the Virgin firmware on the phone?
Thank You
Click to expand...
Click to collapse
Why would you want to? Besides yours is a 930f, don't think you can flash w8 firmware on it.
peachpuff said:
Why would you want to? Besides yours is a 930f, don't think you can flash w8 firmware on it.
Click to expand...
Click to collapse
I just realized that before..which firmware will get me the LTE instead of 4G and also I am getting error on the S Health its telling me that the device has been compromised...
Thanks

Wifi Calling with Unlocked Note 10+ (AT&T)

I'm not sure if this is supported, I can't seem to get much help from AT&T, but I purchased an unlocked Note 10+ from Samsung. I do not have WiFi Calling which is a crucial feature since my office has terrible reception and I use the phone for work.
Is this something I should be able to get working with help from my carrier or is this ROM/build specific? Any help would be appreciated, thanks!
rysal said:
I'm not sure if this is supported, I can't seem to get much help from AT&T, but I purchased an unlocked Note 10+ from Samsung. I do not have WiFi Calling which is a crucial feature since my office has terrible reception and I use the phone for work.
Is this something I should be able to get working with help from my carrier or is this ROM/build specific? Any help would be appreciated, thanks!
Click to expand...
Click to collapse
Along with one or two pros, I found this to be one of the cons in using an unlocked phone with Verizon a couple of years ago, along with no notifications. I spent countless hours over several days on the phone with Samsung and Verizon before finding out this was a known (by Samsung) issue. I returned mine and got the Verizon branded one. Things may have changed since then, but it cured me of the unlocked version, especially since contracts have fallen by the wayside. If they can't resolve the WiFi calling, Samsung should allow you to return it. I hope someone else has a solution for you.
Install the ATT rom using Odin
foeshigity said:
Install the ATT rom using Odin
Click to expand...
Click to collapse
Glad I read first, I'm going through the same thing right now. Just downloaded the firmware from Sammobile about to try and see.
rysal said:
I'm not sure if this is supported, I can't seem to get much help from AT&T, but I purchased an unlocked Note 10+ from Samsung. I do not have WiFi Calling which is a crucial feature since my office has terrible reception and I use the phone for work.
Is this something I should be able to get working with help from my carrier or is this ROM/build specific? Any help would be appreciated, thanks!
Click to expand...
Click to collapse
I Tried flashing the AT&T firmware N975U1UEU1ASH4 from Sammobile and sill no wifi calling.
I am in the same boat. Just out of curiosity what does the service provider SW ver. look like? Mine shows ATT/ATT/XAA
Still no wifi calling or carrier specific options...it's kind of strange that these phones provision the features when you put a sim card in.
I called both At&t and Samsung who were equally less than helpful.
I am looking back to some of the S8+ forums about CSC swapping because I feel like that might be a starting place...
TechGoon954 said:
I Tried flashing the AT&T firmware N975U1UEU1ASH4 from Sammobile and sill no wifi calling.
Click to expand...
Click to collapse
You downloaded N975U1 unlocked rom, it was still rom for unlocked note 10 not AT&T or variant note 10. If you want full AT&T features like wifi calling, video calling..you should download and odin this firmware N975USQU1ASH4 which is AT&T Variant N975U. I am still on unlocked Galaxy note 9 N960U1 and I odin Verizon note 9 SM-N960U on my unlocked Galaxy note 9. The ROM works with every carrier anyway.
rysal said:
I'm not sure if this is supported, I can't seem to get much help from AT&T, but I purchased an unlocked Note 10+ from Samsung. I do not have WiFi Calling which is a crucial feature since my office has terrible reception and I use the phone for work.
Is this something I should be able to get working with help from my carrier or is this ROM/build specific? Any help would be appreciated, thanks!
Click to expand...
Click to collapse
luckyfate said:
You downloaded N975U1 unlocked rom, it was still rom for unlocked note 10 not AT&T or variant note 10. If you want full AT&T features like wifi calling, video calling..you should download and odin this firmware N975USQU1ASH4 which is AT&T Variant N975U. I am still on unlocked Galaxy note 9 N960U1 and I odin Verizon note 9 SM-N960U on my unlocked Galaxy note 9. The ROM works with every carrier anyway.
Click to expand...
Click to collapse
Okay , I got my WIFI calling . This is the correct one to download and flash......... DO NOT Download the one that says AT&T it's going to just flash the same N975U1. Good luck:good:
I'm thinking about doing this. Will flashing the at&t firmware wipe the phone? Articles I've read says it doesn't. Is that correct?
---------- Post added at 10:04 PM ---------- Previous post was at 09:56 PM ----------
Also can someone confirm the correct at&t firmware for the Note 10? Also use the USA(USC) version?
TechGoon954 said:
Okay , I got my WIFI calling . This is the correct one to download and flash......... DO NOT Download the one that says AT&T it's going to just flash the same N975U1. Good luck:good:
Click to expand...
Click to collapse
Thank you! I was able to successfully flash with this ROM and now have the AT&T features I was missing!
What about for the regular Note 10? Is it N970USQU1ASH4 for the unlocked AT&T version?
I just flashed the regular Note 10. Still no wifi calling. In the Service Provider SW ver, it says ATT/ATT/XAA so I believe I've flashed the ATT firmware?
Baseband version
N970UIUEUIASH4
Service provider SW ver.
SAOMC SM-N970UI_OYM_ATT_PP_0030
R58M81758ZM
ATT/ATT/XAA
I just flashed to N970USQU1ASH4, and got the AT&T bloat and wifi calling, but theres no cellular service anymore. I tried flashing back, but now am getting a model mismatch error. I dont know what to do anymore.
Did you download from the sammobile site? Did you use the att or usc firmware?
rmrl2008 said:
Did you download from the sammobile site? Did you use the att or usc firmware?
Click to expand...
Click to collapse
I flashed N970USQU1ASH4_N970UOYN1ASH4_USC from sammobile.com
Hmm I did the same thing. I flashed both the att and usc firmwares. Odin said pass but I didn't see any difference. I used the home_csc file though. I didn't want to wipe my phone before knowing whether I used the right firmware.
I have an N970u1 but flashed it to the u version. Is that what you did?
Well my model number still says U1. So does that mean that me flashing both the USC and ATT firmwares did nothing?
---------- Post added at 08:15 PM ---------- Previous post was at 07:56 PM ----------
I understand what you're asking me now. No I used the u1 firmwares.
---------- Post added at 08:27 PM ---------- Previous post was at 08:15 PM ----------
Did you get your phone working? I'm hesitant to give the U firmware a try now.
---------- Post added at 08:48 PM ---------- Previous post was at 08:27 PM ----------
Reading another thread, did you first boot up with an att sim card before flashing? I believe you have to do that first.
Ota updates
Will the OTA updates work after flashing the att stuff? I know theres a new firmware but the phone is saying it's up to date.
I'm having a problem with this too. I flashed the USC version and got the ATT Bloat, but when I try to enable wifi calling I get "Oops! Wi-Fi Calling can't be turned on right now. Please call 611 or 800-901-9878 for assistance. (APP0008) Can anyone help?
Is it possible they are locking Wifi calling based on IEMI?

Reflash AT&T 20 Ultra to Unlocked Firmware?

I've looked through threads of people doing the reverse of this. It's been a few years since I've had an android and was running nexus devices then. What's the process to flash an unlocked firmware on an AT&T locked 968U to the 968U1 firmware (assuming there aren't issues doing it)?
Are there any other pitfalls I need to be aware of prior to doing it other than the wifi calling?
If this is already posted somewhere else, please feel free to point me there. I didn't see any info about going from a carrier locked 968U to unlocked firmware.
Thanks in advance.
viperhrdtp said:
I've looked through threads of people doing the reverse of this. It's been a few years since I've had an android and was running nexus devices then. What's the process to flash an unlocked firmware on an AT&T locked 968U to the 968U1 firmware (assuming there aren't issues doing it)?
Are there any other pitfalls I need to be aware of prior to doing it other than the wifi calling?
If this is already posted somewhere else, please feel free to point me there. I didn't see any info about going from a carrier locked 968U to unlocked firmware.
Thanks in advance.
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-note-20-ultra/how-to/ota-ota-firmware-n986u-t4143833/page71
I have done this and I lost WIFI calling and VOLTE. I'm very happy with it so far.
viperhrdtp said:
I've looked through threads of people doing the reverse of this. It's been a few years since I've had an android and was running nexus devices then. What's the process to flash an unlocked firmware on an AT&T locked 968U to the 968U1 firmware (assuming there aren't issues doing it)?
Are there any other pitfalls I need to be aware of prior to doing it other than the wifi calling?
If this is already posted somewhere else, please feel free to point me there. I didn't see any info about going from a carrier locked 968U to unlocked firmware.
Thanks in advance.
Click to expand...
Click to collapse
I just did this today went from TMB locked one to unlocked (For a family member) mine is unlocked. All went well no problems at all. Just download the U1 Firmware you want to flash and for CSC use home_csc (In ODin) so you can keep your data and probably the wifi calling feature too ( i did that all features are intact). Use the Odin and firmware from Ota and non Ota thread . Enjoy
ahenderson223 said:
https://forum.xda-developers.com/galaxy-note-20-ultra/how-to/ota-ota-firmware-n986u-t4143833/page71
I have done this and I lost WIFI calling and VOLTE. I'm very happy with it so far.
Click to expand...
Click to collapse
What did you gain that made it worth it for you? Also, I'm on a Locked ATT/Firstnet Ultra and am wondering if flashing to an Unlocked Firmware would give me more control of my device.
that1guyty said:
What did you gain that made it worth it for you? Also, I'm on a Locked ATT/Firstnet Ultra and am wondering if flashing to an Unlocked Firmware would give me more control of my device.
Click to expand...
Click to collapse
If your on FirstNet I recommend that you stay on ATT branded software, I'm not sure if band 14 will work properly for you if you are on unlocked software. Thank you for your service!
ahenderson223 said:
https://forum.xda-developers.com/galaxy-note-20-ultra/how-to/ota-ota-firmware-n986u-t4143833/page71
I have done this and I lost WIFI calling and VOLTE. I'm very happy with it so far.
Click to expand...
Click to collapse
You can get VoLTE back, but yeah, WiFi calling is not gonna happen.
https://forum.xda-developers.com/ga...to/how-to-activate-video-calling-lte-t4178819
The thread is for T-Mobile, but most of it works with AT&T devices as well.
rjohnstone said:
You can get VoLTE back, but yeah, WiFi calling is not gonna happen.
https://forum.xda-developers.com/ga...to/how-to-activate-video-calling-lte-t4178819
The thread is for T-Mobile, but most of it works with AT&T devices as well.
Click to expand...
Click to collapse
I flashed the U1 firmware (ATJ3) onto my AT&T Note Ultra, then flashed the Home CSC from the AT&T U firmware. I have VoLTE and WiFi calling.
Help!
Hello all, I have a Note 20 Ultra 5g that is unlocked and I'm looking to flash the original ATT firmware for this device.
Having this unlocked version on Firstnet has been nothing but problems and I don't have access to band 14 or wifi calling.
I see this thread is a little old but if anyone could help me out or send me in the right direction I would greatly appreciate it!
I have rooted some of my older phones several several years ago so I think I could pick this back up pretty quickly. I know over the years things seem to get easier and have probably changed quite a bit since I've last done something like this.
Thanks in advance!
droppinbaums said:
I flashed the U1 firmware (ATJ3) onto my AT&T Note Ultra, then flashed the Home CSC from the AT&T U firmware. I have VoLTE and WiFi calling.
Click to expand...
Click to collapse
My comment was made before we were able to change IMS settings directly.
You can get it all now. VoLTE, WiFI Calling, RCS, Video calling...
Verntd3 said:
Help!
Hello all, I have a Note 20 Ultra 5g that is unlocked and I'm looking to flash the original ATT firmware for this device.
Having this unlocked version on Firstnet has been nothing but problems and I don't have access to band 14 or wifi calling.
I see this thread is a little old but if anyone could help me out or send me in the right direction I would greatly appreciate it!
I have rooted some of my older phones several several years ago so I think I could pick this back up pretty quickly. I know over the years things seem to get easier and have probably changed quite a bit since I've last done something like this.
Thanks in advance!
Click to expand...
Click to collapse
AT&T hasn't released any "official" firmware for the Note 20 series.
Since Samsung firmware is multi CSC, just flash any firmware with the same build number as the AT&T variant and use your AT&T SIM card.
Go to this thread https://forum.xda-developers.com/t/ota-and-non-ota-firmware-for-n986u-and-n986u1.4143833/
Make sure you know what device you have, U or U1. Then grab the appropriate version.
Fir AT&T U devices, N986USQU2DUCA or N986USQU2DUCA will work.
For AT&T U1 devices, N986U1UEU2DUCB is the most recent version.
rjohnstone said:
AT&T hasn't released any "official" firmware for the Note 20 series.
Since Samsung firmware is multi CSC, just flash any firmware with the same build number as the AT&T variant and use your AT&T SIM card.
Go to this thread https://forum.xda-developers.com/t/ota-and-non-ota-firmware-for-n986u-and-n986u1.4143833/
Make sure you know what device you have, U or U1. Then grab the appropriate version.
Fir AT&T U devices, N986USQU2DUCA or N986USQU2DUCA will work.
For AT&T U1 devices, N986U1UEU2DUCB is the most recent version.
Click to expand...
Click to collapse
Ok thanks, according to this I assume I have the U1....?
Verntd3 said:
Ok thanks, according to this I assume I have the U1....?
Click to expand...
Click to collapse
Yes, based on screenshot, you have U1
warriorvibhu said:
I just did this today went from TMB locked one to unlocked (For a family member) mine is unlocked. All went well no problems at all. Just download the U1 Firmware you want to flash and for CSC use home_csc (In ODin) so you can keep your data and probably the wifi calling feature too ( i did that all features are intact). Use the Odin and firmware from Ota and non Ota thread . Enjoy
Click to expand...
Click to collapse
So i can flash rom n986u1 on N986u ?
romano_ezzat said:
So i can flash rom n986u1 on N986u ?
Click to expand...
Click to collapse
Yes you can, please look for instructions I have posted instruction on this device forum to go from U to U1 and vice versa

Categories

Resources