[Completed] [SOLVED] Please HELP!! HTC ONE M9 - XDA Assist

Hey, i had rooted, s-off, unlocked device..
i wanted to go back to stock, i changed CID , MID,locked bootloader and phone is now S-ON...
By mistake i flashed stock recovery before i flashed the stock rom..
now my bot only gets into bootloader, i dont have "factory reset"/"wipe" or any other option.. not even in download mode.
When i try to get in recovery it says : "Failed to boot to recovery mode".
When plugging the phone to my PC, it charges, yet the computer wont recognize the device, meaning i cant use adb commands..
Please help!!

Amir0s said:
Hey, i had rooted, s-off, unlocked device..
i wanted to go back to stock, i changed CID , MID,locked bootloader and phone is now S-ON...
By mistake i flashed stock recovery before i flashed the stock rom..
now my bot only gets into bootloader, i dont have "factory reset"/"wipe" or any other option.. not even in download mode.
When i try to get in recovery it says : "Failed to boot to recovery mode".
When plugging the phone to my PC, it charges, yet the computer wont recognize the device, meaning i cant use adb commands..
Please help!!
Click to expand...
Click to collapse
Bump up..
i tried installing RUU Via exe files, only 1 time it managed to detect my phone, and too bad for me i had the wrong ruu.
Now when i try using the correct ruu, the exe file cant detect my phone.. ideas ??

SOLVED!!!!
Amir0s said:
Bump up..
i tried installing RUU Via exe files, only 1 time it managed to detect my phone, and too bad for me i had the wrong ruu.
Now when i try using the correct ruu, the exe file cant detect my phone.. ideas ??
Click to expand...
Click to collapse
After 1 sleepless night and alot of hours i finally got it working!!
Here is how i did it:
1. Uninstall HTC Sync
2. Unlock Bootloader using the htcdev.com Method..
yyyyaaaaaaaaaaayyyyyyyyyy

Thanks
Thread closed.

Related

mount in hboot?

i used htcdev because i wrote s-on wrong and now im having problems. I cant mount the phone to the computer, it just wont pick it up, ive installde drivers and htcsync and everything but still nothing. I need it to be able to get stuff on my sdcard. Also, i need help further (sorry ), when the phone goes into hboot mode it updates the pg58img file but then reboots into hboot i tried using cmd but didnt work.
sensation lover said:
i used htcdev because i wrote s-on wrong and now im having problems. I cant mount the phone to the computer, it just wont pick it up, ive installde drivers and htcsync and everything but still nothing. I need it to be able to get stuff on my sdcard. Also, i need help further (sorry ), when the phone goes into hboot mode it updates the pg58img file but then reboots into hboot i tried using cmd but didnt work.
Click to expand...
Click to collapse
just use an sdcard adapter since you haven't solved the problem

[Q] HTC one S Bricked and pissed !!

So in my infinite wisdom I decided to download one more ROM and successfully bricked my phone bootlooped and cant seem to anything with it !! I cant mount the SD card and I have tried everything I have seen on here from the Fast boot kit etc...any enlightenment from someone would be appreciated..I have CWM on my phone but can not get past the boot animation....nor can I download a new rom or boot img....:crying: btw I have been at this since 9 and it is now 4 30 AM !!!
You need to download the RUU file and run it from your pc
Sent from my HTC One S using xda app-developers app
Adb push a rom onto the phone and flash
Sent from a man, using a mobile phone
k1llacanon said:
Adb push a rom onto the phone and flash
Sent from a man, using a mobile phone[/
I tried this no success....
Click to expand...
Click to collapse
flash original recovery (can be taken from the RUU), Relock bootloader afterwards run RUU on your computer
septamobile said:
flash original recovery (can be taken from the RUU), Relock bootloader afterwards run RUU on your computer
Click to expand...
Click to collapse
Ok can someone please explain to me whats ruu...I have no idea what that is or where I can get it from !!!
Ruu takes the phone completely back to stock but u need to find the right version for u so we need some information
What country are you in?
What is your radio version
Is your phone branded? E. G does it have t mobile on it
Sent from a man, using a mobile phone
Okay download an appropriate ruu for your device, international, tmobile, etc. Power down the device (Power button and volume down for 10 seconds) plug in the usb from the wall and power on and charge for a few hours. (Don't want your phone to permanently turn off and hard brick your device) Follow the instructions on the ruu to get back to stock.
Relock your bootloader before starting the ruu process. "fastboot oem lock" You should know the basics by now.
I'll Pm you some ruu that may work..
i have messed everything
I accidentally formatted my internal storage , cache , data, system and everything.
I cannot able to mount the USB and not even fastboot as it is saying waiting for device. My bootloader is the only thing thats working,not even my philz recovery is of no use . adb is not recognizing my phone . please help me
Please let me know about any solution for the problem
kt92 said:
I accidentally formatted my internal storage , cache , data, system and everything.
I cannot able to mount the USB and not even fastboot as it is saying waiting for device. My bootloader is the only thing thats working,not even my philz recovery is of no use . adb is not recognizing my phone . please help me
Please let me know about any solution for the problem
Click to expand...
Click to collapse
First thing you need to do is get fastboot working. At this point, you cannot do anything without it.
So go into bootloader, select fastboot, connect to pc and you should see it change to fastboot USB on your phone after a few seconds.
Navigate to the folder containing fastboot and hold shift and right click somewhere on the window, select open command prompt here. Now, enter the command:
fastboot erase cache
If it goes through, great. If not, you need to update drivers. Install the latest version of HTC sync on your PC.
Of no luck, try another PC, different USB port, different cable, whatever. You need to get it working.
Once it is working, you will need to fastboot recovery, boot.img, etc, but do what I said first, then report back.
hTConeS | SoFF | DarKSeNsE | BuLLetprOOf
Dark Sense 5 Theme Updates+Tweaks
Inverted Sense 4+
Solved
ryanshew said:
First thing you need to do is get fastboot working. At this point, you cannot do anything without it.
So go into bootloader, select fastboot, connect to pc and you should see it change to fastboot USB on your phone after a few seconds.
Navigate to the folder containing fastboot and hold shift and right click somewhere on the window, select open command prompt here. Now, enter the command:
fastboot erase cache
If it goes through, great. If not, you need to update drivers. Install the latest version of HTC sync on your PC.
Of no luck, try another PC, different USB port, different cable, whatever. You need to get it working.
Once it is working, you will need to fastboot recovery, not.omg, etc, but do what I said first, them report back.
hTConeS | SoFF | DarKSeNsE | BuLLetprOOf
Dark Sense 5 Theme Updates+Tweaks
Inverted Sense 4+
Click to expand...
Click to collapse
yeah I followed the steps for making my bootloader work again , then i flashed RUU for my device and this worked without any error. I had the HTC__001 CID . soo it helped me in the RUU process
thanks for the solution

[Q] Bricked phone, please help!

Today I flashed the last CleanRom 5.1 then I flashed kernel BeastMode evita 4.4 and the phone has bricked in the screen of HTC. So I did a big mistake, in the bootlloader i am pretty sure I have wiped the phone, now I have no ROM in the phone, and the TWRP will not let me select mount sd card. I have thinking in push the ROM in ADB but sincerely I have no idea how to do that. Actually I´m in the bootloader screen and connected the phone, appearing "Fastboot USB". Could someone kindly tell me what are the orders in the Command Prompt to connect the phone to my pc and push the rom?
The phone was with CM10 ROM, rooted and TWRP provided by a friend who is not available to help me.
BTW sorry for my regular english, I´m from Argentina.
juanfranrod said:
Today I flashed the last CleanRom 5.1 then I flashed kernel BeastMode evita 4.4 and the phone has bricked in the screen of HTC. So I did a big mistake, in the bootlloader i am pretty sure I have wiped the phone, now I have no ROM in the phone, and the TWRP will not let me select mount sd card. I have thinking in push the ROM in ADB but sincerely I have no idea how to do that. Actually I´m in the bootloader screen and connected the phone, appearing "Fastboot USB". Could someone kindly tell me what are the orders in the Command Prompt to connect the phone to my pc and push the rom?
The phone was with CM10 ROM, rooted and TWRP provided by a friend who is not available to help me.
BTW sorry for my regular english, I´m from Argentina.
Click to expand...
Click to collapse
My First advice, relock bootloader and run ruu...If your on the newer hboot don't you have to flash boot.img as well before flashing the rom? Did you wipe cashe and dalvik when you flashed? Did you see if rom first worked before flashing kernel?
WhatTheAndroid? said:
My First advice, relock bootloader and run ruu...If your on the newer hboot don't you have to flash boot.img as well before flashing the rom? Did you wipe cashe and dalvik when you flashed? Did you see if rom first worked before flashing kernel?
Click to expand...
Click to collapse
I have flashed boot.img in the aroma installer of cleanrom. Then I wipe cache and dalvik after flash rom. But I made the mistake of not checking if it worked the ROM before installing the new kernel.. I installed after the rom.
Could you explain me how to relock bootloader and run ruu?
Appreciate your help
juanfranrod said:
I have flashed boot.img in the aroma installer of cleanrom. Then I wipe cache and dalvik after flash rom. But I made the mistake of not checking if it worked the ROM before installing the new kernel.. I installed after the rom.
Could you explain me how to relock bootloader and run ruu?
Appreciate your help
Click to expand...
Click to collapse
I'm sure someone will provide a ruu download based on your phone. Fastboot oem lock command in fastboot to lock bootloader. I would wait though to see if there is still a way to flash Rom and mount your phones sd card.by the way did you create a recovery in twrp of stock rooted version?
You dont need to RUU. I don't know why everyone runs to that.
Open TWRP, mount usb storage.
If you're on windows, it should prompt you to format your sd card. Format it to fat32.
Copy whatever rom you want onto the card.
Install in TWRP.
Dance
He wiped his phone from bootloader... Therefore corrupting his SD card. He could adb push the rom to his card though
Sent from my One X using xda app-developers app
WhatTheAndroid? said:
I'm sure someone will provide a ruu download based on your phone. Fastboot oem lock command in fastboot to lock bootloader. I would wait though to see if there is still a way to flash Rom and mount your phones sd card.by the way did you create a recovery in twrp of stock rooted version?
Click to expand...
Click to collapse
Myrder said:
He wiped his phone from bootloader... Therefore corrupting his SD card. He could adb push the rom to his card though
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
Hi, I still cannot solving my problem :/ I locked the phone with the command "fastboot oem lock" in fastboot. Then I downloaded a RUU called htc_one_x_RUU_2.20.502.7_att_us_08022012.exe and I´ve executed the file in fastboot but appears during the installation process an error message that the phone is not connected with the USB cable, when obviously connected.
I have no idea what to do, I tried to check the connections, right now I'm trying to download another RUU apparently compatible, my CID is 11111111 and my HBOOT is 1.09.0000. Can you think of anything else I can do?
juanfranrod said:
Can you think of anything else I can do?
Click to expand...
Click to collapse
Did you reformat your SD card?
iElvis said:
Did you reformat your SD card?
Click to expand...
Click to collapse
Yes, I did it. I will try with another RUU (1.85) and see what happens.. for now I accept suggestions. Thanks
Your hboot is 1.09 which means you need the 1.85 firmware
area51avenger said:
Your hboot is 1.09 which means you need the 1.85 firmware
Click to expand...
Click to collapse
Newer RUU version should still work, but avoiding the 1.14 hboot is a good idea. So I too would recommend getting the 1.85 RUU: http://forum.xda-developers.com/showthread.php?t=1670238
OP should make sure he has the latest HTC drivers installed on the PC, or try re-installing them. Also try a different USB port. I've seen more than a few times on here, where it was simple as the drivers or the USB port.
redpoint73 said:
Newer RUU version should still work, but avoiding the 1.14 hboot is a good idea. So I too would recommend getting the 1.85 RUU: http://forum.xda-developers.com/showthread.php?t=1670238
OP should make sure he has the latest HTC drivers installed on the PC, or try re-installing them. Also try a different USB port. I've seen more than a few times on here, where it was simple as the drivers or the USB port.
Click to expand...
Click to collapse
damn.. now adb devices doesn't show my phone, there is no way to connect the phone to the pc, sooner if I did, I find it very strange
maybe for this reason the install of the RUU 1.85 has failed
This is my screen, and in fastboot, the pc doesnt recognize the phone with the command "adb devices"
please help, im freaking out!
juanfranrod said:
This is my screen, and in fastboot, the pc doesnt recognize the phone with the command "adb devices"
please help, im freaking out!
Click to expand...
Click to collapse
Don't freak out, if your phone can be turned on it can be fixed.are you sure you have done everything they have said? Or have you tried unlocking again wiping and flashing a Rom? Does the computer make those 2 beeps when you plug your phone in?
juanfranrod said:
This is my screen, and in fastboot, the pc doesnt recognize the phone with the command "adb devices"
please help, im freaking out!
Click to expand...
Click to collapse
You can't use adb in fast boot
Use
Fastboot devices
Sent from my HTC One X-
WhatTheAndroid? said:
Don't freak out, if your phone can be turned on it can be fixed.are you sure you have done everything they have said? Or have you tried unlocking again wiping and flashing a Rom? Does the computer make those 2 beeps when you plug your phone in?
Click to expand...
Click to collapse
Ok I unlocked the phone again, and wiped the phone. I tried typing in commands "fastboot flash zip Cleanrom5.zip" and gave me FAILED.. and yes, the computer make the beep (1) when I connect the phone, as a usb sound.
iElvis said:
Did you reformat your SD card?
Click to expand...
Click to collapse
hey iElvis, had not understood exactly where reformatting the SD card, as I did through the recovery and failed, will be the problem?
I have relocked the phone again, and I have tried to run the RUU in fastboot, but the last step in the installation appear an Error 170: Usb Connection Error... sigh
almost a complete day for nothing
juanfranrod said:
I have relocked the phone again, and I have tried to run the RUU in fastboot, but the last step in the installation appear an Error 170: Usb Connection Error... sigh
almost a complete day for nothing
Click to expand...
Click to collapse
This happened to me and I was able to do
fastboot flash recovery recovery.img (using original recovery)
Then reboot into bootloader then fastboot
fastboot boot TWRP.img
Then, once you're in TWRP, you can just flash a rom
Hope it helps! I'm still kinda nooby w/ htc as I was with motorola forever! I got my phone 1 month ago so... yeah
Try it! I was hopeless but I just kept trying!
Good luck!
---------- Post added at 05:48 AM ---------- Previous post was at 05:42 AM ----------
juanfranrod said:
This is my screen, and in fastboot, the pc doesnt recognize the phone with the command "adb devices"
please help, im freaking out!
Click to expand...
Click to collapse
Also, that just means your battery is low.
Just charge the phone while in bootloader overnight.
You should then be able to detect USB
juanfranrod said:
hey iElvis, had not understood exactly where reformatting the SD card, as I did through the recovery and failed, will be the problem?
Click to expand...
Click to collapse
You connect the phone to the PC, select "Mount USB" in TWRP. Then on your PC format the phone's SD card.

Help save my Sensation

I have an XE, HBOOT 1.27 Unlocked and S-ON and I flashed many ROMs, always enabling SmartFlash in 4Ext.
Yesterday I tried to flash Sebastian's ROM, Revelation, and now my phone is stuck at HTC Splash Screen.
First I did a nandroid to my current ROM, Pac 1.1, then format all(except SD Card), then flashed Revelation and something went wrong.
After flash complete I confirmed reboot and right before 4Ext closed, it showed a message saying something like : It has been detected a change in your boot partition, a backup of previous has been made in /sdcard/4Ext/boot.
It stays like that for a few seconds(I always had this message when flashed other ROMs) and soon after says something "there has been an error, report it" (never seen this message before) and reboots, but keeps showing Splash Screen for ~5 seconds, turns black, then Splash Screen again and so on until I remove the battery.
What can I do and how?
Someone told me to push via fastboot the ROM's boot.img but there is a problem.I have a PC where the phone has never been connected via USB cable, so I have no driver/tool anything.
When I connect it to PC, nothing shows up.
If I select FASTBOOT from the bootloader menu, still nothing shows up on PC.I tried from 4Ext menu Toggle usb connection, but still no trace on my PC.
I beg you, help me.
EDIT : I just found out that Sebastian messed up something in the installer, and all I have to do is to flash the boot.img through fastboot.
doublin said:
I have an XE, HBOOT 1.27 Unlocked and S-ON and I flashed many ROMs, always enabling SmartFlash in 4Ext.
Yesterday I tried to flash Sebastian's ROM, Revelation, and now my phone is stuck at HTC Splash Screen.
First I did a nandroid to my current ROM, Pac 1.1, then format all(except SD Card), then flashed Revelation and something went wrong.
After flash complete I confirmed reboot and right before 4Ext closed, it showed a message saying something like : It has been detected a change in your boot partition, a backup of previous has been made in /sdcard/4Ext/boot.
It stays like that for a few seconds(I always had this message when flashed other ROMs) and soon after says something "there has been an error, report it" (never seen this message before) and reboots, but keeps showing Splash Screen for ~5 seconds, turns black, then Splash Screen again and so on until I remove the battery.
What can I do and how?
Someone told me to push via fastboot the ROM's boot.img but there is a problem.I have a PC where the phone has never been connected via USB cable, so I have no driver/tool anything.
When I connect it to PC, nothing shows up.
If I select FASTBOOT from the bootloader menu, still nothing shows up on PC.I tried from 4Ext menu Toggle usb connection, but still no trace on my PC.
I beg you, help me.
Click to expand...
Click to collapse
Hi,
Try flashing a STOCK ROM
Choose the XE in the second post.
Otherwise you will have to setup your PC to run a RUU,and return everything back to square one.
The weird thing is that even if I try to flash another ROM, stil the same problem.
I format all except SD card,wipe cache+dalvik, mount SD card into PC and delete folder 4Ext/boot_backup.
Go back to 4Ext, enable SmartFlash and flash CM 10.1 by Albino . Reboot, I get the message about my boot partition has been modified, but not the error too, and when it reboots, stuck at splash screen.
I'm desperate.
doublin said:
The weird thing is that even if I try to flash another ROM, stil the same problem.
I format all except SD card,wipe cache+dalvik, mount SD card into PC and delete folder 4Ext/boot_backup.
Go back to 4Ext, enable SmartFlash and flash CM 10.1 by Albino . Reboot, I get the message about my boot partition has been modified, but not the error too, and when it reboots, stuck at splash screen.
I'm desperate.
Click to expand...
Click to collapse
Hi,
It looks like your only option to reconfigure your boot partition ,is to run a RUU.
Look HERE
Do you know the version-main of your phone?
But first you will also need to setup your PC for ADB.
Look HERE
malybru said:
Hi,
It looks like your only option to reconfigure your boot partition ,is to run a RUU.
Look HERE
Do you know the version-main of your phone?
But first you will also need to setup your PC for ADB.
Look HERE
Click to expand...
Click to collapse
Ok thank you for your links.
I'll try to do it tomorrow `cause right now I can't keep my concentration, too late and had a long day.
malybru said:
Hi,
It looks like your only option to reconfigure your boot partition ,is to run a RUU.
Look HERE
Do you know the version-main of your phone?
But first you will also need to setup your PC for ADB.
Look HERE
Click to expand...
Click to collapse
actually if he setup the pc with adb and fastboot files he will be able to flash the boot.img manually
so why the ruu.exe?
rzr86 said:
actually if he setup the pc with adb and fastboot files he will be able to flash the boot.img manually
so why the ruu.exe?
Click to expand...
Click to collapse
I tried that yesterday with the help of a guy, but no success.
I installed all necessary drivers, adb and fastboot, but I can't get my phone discovered on my PC.
If the boot partition would be screwed, why it doesn't work when I try to flash other ROM? Like CM 10.1 or the XE Stock that I've been suggested a few posts above. Flashing this ROMs, shouldn't the boot partition be written with the ROM's files, and everything should turn back as normal?
doublin said:
I tried that yesterday with the help of a guy, but no success.
I installed all necessary drivers, adb and fastboot, but I can't get my phone discovered on my PC.
If the boot partition would be screwed, why it doesn't work when I try to flash other ROM? Like CM 10.1 or the XE Stock that I've been suggested a few posts above. Flashing this ROMs, shouldn't the boot partition be written with the ROM's files, and everything should turn back as normal?
Click to expand...
Click to collapse
It should rewrite the boot partition. Are you sure 4ext says "a pending update to..." and the process completes?
First boot after a new flash can take as long a 10mins. Wait it out.
Anyway if it diesnt work, try another wipe (all except sdcard) flash another rom, and if you're still stuck, use an ruu.
Happy to help.
Far_SighT said:
It should rewrite the boot partition. Are you sure 4ext says "a pending update to..." and the process completes?
First boot after a new flash can take as long a 10mins. Wait it out.
Anyway if it diesnt work, try another wipe (all except sdcard) flash another rom, and if you're still stuck, use an ruu.
Happy to help.
Click to expand...
Click to collapse
I'm very sure 4ext says "a pending update to..." but only it doesn't completes as usual, instead show an error saying that the process couldn't be completed and the boot partition was reverted back as it was,report the problem. This happens when trying to flash Revelation.
I flashed CM 10.1 and says only " a pending update to..." no error , reboots and keeps turning off and on the splash screen.
I flashed a stock XE ROM, happens same thing as in CM 10.1 case.
I tried restoring from nandroid , happens same as CM 10.1 and stock XE ROM.
I wiped and flashed so many times in the last 2 days that I didn't do in the whole year that I had the phone.
I can't use a RUU, as I'm stuck at getting the phone discovered by PC.As I said, I installed all necessary drivers found on a topic here, but still can't see the phone.I tried HTC Sync also, as that pack installs the drivers too, but still no luck.
My last hope is to try connecting the phone on an older PC that I put it in a box and thrown it in the garage.That PC has all drivers and set-up for the phone, but they are outdated for sure.
doublin said:
I'm very sure 4ext says "a pending update to..." but only it doesn't completes as usual, instead show an error saying that the process couldn't be completed and the boot partition was reverted back as it was,report the problem. This happens when trying to flash Revelation.
I flashed CM 10.1 and says only " a pending update to..." no error , reboots and keeps turning off and on the splash screen.
I flashed a stock XE ROM, happens same thing as in CM 10.1 case.
I tried restoring from nandroid , happens same as CM 10.1 and stock XE ROM.
I wiped and flashed so many times in the last 2 days that I didn't do in the whole year that I had the phone.
I can't use a RUU, as I'm stuck at getting the phone discovered by PC.As I said, I installed all necessary drivers found on a topic here, but still can't see the phone.I tried HTC Sync also, as that pack installs the drivers too, but still no luck.
My last hope is to try connecting the phone on an older PC that I put it in a box and thrown it in the garage.That PC has all drivers and set-up for the phone, but they are outdated for sure.
Click to expand...
Click to collapse
There you go. The reason your phone is in a bootloop is that the correct boot.img is not written.
And something is not right with your recovery. It could be a bad flash (I'm not sure).
I don't think you need to use an ruu. Just get on a pc that recognizes your device, and flash the correct boot.img.
I would advise that you flash the recovery.img again.
EDIT: Change usb port to 2.0. Try all usb ports on your computer. It is quite common that fastboot recognizes devices on some usb ports and not on others.
Alternatively read this, point 4. This will surely work if you can't get another pc
doublin said:
I'm very sure 4ext says "a pending update to..." but only it doesn't completes as usual, instead show an error saying that the process couldn't be completed and the boot partition was reverted back as it was,report the problem. This happens when trying to flash Revelation.
I flashed CM 10.1 and says only " a pending update to..." no error , reboots and keeps turning off and on the splash screen.
I flashed a stock XE ROM, happens same thing as in CM 10.1 case.
I tried restoring from nandroid , happens same as CM 10.1 and stock XE ROM.
I wiped and flashed so many times in the last 2 days that I didn't do in the whole year that I had the phone.
I can't use a RUU, as I'm stuck at getting the phone discovered by PC.As I said, I installed all necessary drivers found on a topic here, but still can't see the phone.I tried HTC Sync also, as that pack installs the drivers too, but still no luck.
My last hope is to try connecting the phone on an older PC that I put it in a box and thrown it in the garage.That PC has all drivers and set-up for the phone, but they are outdated for sure.
Click to expand...
Click to collapse
Hi,
If you need windows 7 & 8 drivers, look HERE
If it worked on your old computer,then,it will still work now.
Far_SighT said:
There you go. The reason your phone is in a bootloop is that the correct boot.img is not written.
And something is not right with your recovery. It could be a bad flash (I'm not sure).
I don't think you need to use an ruu. Just get on a pc that recognizes your device, and flash the correct boot.img.
I would advise that you flash the recovery.img again.
EDIT: Change usb port to 2.0. Try all usb ports on your computer. It is quite common that fastboot recognizes devices on some usb ports and not on others.
Alternatively read this, point 4. This will surely work if you can't get another pc
Click to expand...
Click to collapse
I think this is the key to my problem. I checked the link you gave me and I think I might get it done using that method.
Gonna give it a try as soon as I get some free time later today.
PS : I tried all 3 usb ports on PC, ofc.
Thank you, I will keep this topic update with results.
I'm having a hard time finding the right RUU for my phone, as I don't have access to fastboot, which would make my job a lot easier.
I found a list with providers and CIDs and I suppose mine is HTC-ITA HTC__405 , since I bought it in Italy and it was unbranded.
But i can't get software version, as it asks me to go to setting/About phone . I can't do that.
I think the right RUU is RUU_PYRAMID_LE_ICS_35_S_HTC_Europe_3.32.401.105_R2_Radio_11.69.3504.00U_11.22.3504, so now I'm downloading that and then move on step 4 on that tutorial.
Hope I just won't brick the phone.
doublin said:
I'm having a hard time finding the right RUU for my phone, as I don't have access to fastboot, which would make my job a lot easier.
I found a list with providers and CIDs and I suppose mine is HTC-ITA HTC__405 , since I bought it in Italy and it was unbranded.
But i can't get software version, as it asks me to go to setting/About phone . I can't do that.
I think the right RUU is RUU_PYRAMID_LE_ICS_35_S_HTC_Europe_3.32.401.105_R2_Radio_11.69.3504.00U_11.22.3504, so now I'm downloading that and then move on step 4 on that tutorial.
Hope I just won't brick the phone.
Click to expand...
Click to collapse
You can flash only one particluar ruu. Just make sure it's pyramid le(sensation xe). You will not be able to flash a wrong one, so no need to worry.
Far_SighT said:
You can flash only one particluar ruu. Just make sure it's pyramid le(sensation xe). You will not be able to flash a wrong one, so no need to worry.
Click to expand...
Click to collapse
Yea I'm downloading right now RUU_PYRAMID_LE_ICS_35_S_HTC_Europe_3.32.401.105_R2_Radio_11.69.3504.00U_11.22.3504
Says LE, so I should be fine.
Hi,
The RUU process will not work if the phone says "Unlocked"
You will need to relock the phone,according to the section 3 of the guide.
So,you will need a PC
did you check also if the bootloader screen says fastboot usb?
malybru said:
Hi,
The RUU process will not work if the phone says "Unlocked"
You will need to relock the phone,according to the section 3 of the guide.
So,you will need a PC
Click to expand...
Click to collapse
OOps, forgot that step (I flash ruu via ruu.exe)
malybru said:
Hi,
The RUU process will not work if the phone says "Unlocked"
You will need to relock the phone,according to the section 3 of the guide.
So,you will need a PC
Click to expand...
Click to collapse
But I'm gonna do the step 4 which says only to execute the RUU .exe but don't do anything, and in the temp folder on my pc I will find a file which then I'll have to move to the SD Card and flash straight from my recovery.
rzr86 said:
did you check also if the bootloader screen says fastboot usb?
Click to expand...
Click to collapse
When I vol down & power to get in bootloader I see :
FASTBOOT
RECOVERY
FACTORY RESET
SIM LOCK
IMAGE CRC
I don't know about fastboot usb...
Anyway, selecting FASTBOOT and connecting my phone to PC, nothing shows up, and running fastboot commands doesn't work, there's no link between pc and phone.
doublin said:
But I'm gonna do the step 4 which says only to execute the RUU .exe but don't do anything, and in the temp folder on my pc I will find a file which then I'll have to move to the SD Card and flash straight from my recovery.
When I vol down & power to get in bootloader I see :
FASTBOOT
RECOVERY
FACTORY RESET
SIM LOCK
IMAGE CRC
I don't know about fastboot usb...
Anyway, selecting FASTBOOT and connecting my phone to PC, nothing shows up, and running fastboot commands doesn't work, there's no link between pc and phone.
Click to expand...
Click to collapse
when you select fastboot does it say after that fastboot usb in bootloader screen?
actually have you enabled usb debugging mode from tettings?

[Q] Unlocked, reflashed, app ran into problem phone restarted and bricked?

Hi there,
Im still kinda a noob with android...
but i managed to unlock my htc sensation trough the steps @HTC,
changed the recovery, tried to flash a rom.
it failed due to my phone not being S-off. so i flashed it back :/
no problem there i thought just a rooted htc.
downloaded an app to remove bloat. and all seemed fine...
I was playing Clash of Clans, and it gave a message that the Google play services stopped and the phone rebooted.
when booted the lock screen was frozen, i pulled out the battery to find out my phone is unresponsive..
When i connect to windows 8, it cant recognize my phone at all
When i connect it to a charger i dont see the charging light.
and the worse thing is.. i cant get into the recovery.
any idea's what i can try?
i checked out the [unbrick] tread but i cant seem to figure out which "Package" i need and the links on the bottom of the page dont work when i click them
Thanks in advance
-Aline
At first you have not to be S-OFF in order to flash a rom.
Your rom will get installed just fine.You just need to flash the kernel of your rom manually through fastboot using the command fastboot flash boot boot.img.
What exactly do you mean by telling "so i flashed it back"?
Did you relocked your bootloader with fastboot oem lock and you flashed an RUU?
You said you are just rooted.If my theory was right you probably unlocked your bootloader again by flashing the unlock.bin and a cwm recovery and then you had to use a (Superuser , SuperSU zip).
The first time you unlocked your device was you using the same computer with windows 8?
If yes this is a problem.Check your device manager for unrecognised devices.Can you see the device?
Check this out.You can also check this.
(You can try with win7 or a linux destribution instead.)
Are you still able to boot into bootloader (hboot) using (Power)+(Vol-) Buttons?
If you have enabled usb-debugging and a working adb shell despite you are in a bootloop you can try:
Code:
adb shell
su ------>(If you don't see # instead of $)
reboot oem-78 -------> To get in RUU mode
or
reboot bootloader -------->(To reboot into hboot)
* reboot recovery could bring you to recovery *
If you can get into hboot or RUU mode give the command fastboot getvar all and copy-paste what it prints.
I know it was possible to flash with S-on,
thats what i tried and it failed (manually flashed the boot.img resulted in a bootloop)
so i flashed back to the "stock" rom.
resulting in a "normal" rooted device
since i've replaced my recovery and got root access
it never has been oem locked again.(still isnt)
i cant get into my bootloader/ruu mode. nor start up.
when i plug it into my computer (windows 8) it makes the sound as it does when you connect a device.
but in device manager it shows nothing, not even a yellow ! as it normally would if it can recognize a device.
aline1996 said:
I know it was possible to flash with S-on,
thats what i tried and it failed (manually flashed the boot.img resulted in a bootloop)
so i flashed back to the "stock" rom.
resulting in a "normal" rooted device
since i've replaced my recovery and got root access
it never has been oem locked again.(still isnt)
i cant get into my bootloader/ruu mode. nor start up.
when i plug it into my computer (windows 8) it makes the sound as it does when you connect a device.
but in device manager it shows nothing, not even a yellow ! as it normally would if it can recognize a device.
Click to expand...
Click to collapse
As you have not access to bootloader but your device is still seems to get connected i think you can only try HTC Unbricking Project.If the brickdetect.sh is not working you can try a different linux destribution.
Gatosbil said:
As you have not access to bootloader but your device is still seems to get connected i think you can only try HTC Unbricking Project.If the brickdetect.sh is not working you can try a different linux destribution.
Click to expand...
Click to collapse
Well, i just wonder which package i need, tried the links at the bottom of the post but those are no longer valid :/
aline1996 said:
Well, i just wonder which package i need, tried the links at the bottom of the post but those are no longer valid :/
Click to expand...
Click to collapse
Oups!I downloaded those packages some days before and I didn't see the links are broken now.
You can download them from the attachments here.
For Sensation and Sensation 4G
Gatosbil said:
Oups!I downloaded those packages some days before and I didn't see the links are broken now.
You can download them from the attachments here.
For Sensation and Sensation 4G
Click to expand...
Click to collapse
Well im afraid my phone is offically dead
this is what i get when i use ./brickdetect
[email protected]:/media/sdc$ ./brickdetect.sh
Searching for bricked device...
Device can't be detected. Check connections
[email protected]:/media/sdc$
please tell me i did something wrong xD
edit:
after some digging in knoppix i did find this:
http://imgur.com/DR7T4QK

Categories

Resources