Database Info

urgent help needed~!!! Please Help HTC One X stuck with Fastboot with No OS installed

Something went wrong which I am not gonna explain too much.
Now My phone doesn't have an OS.
I have Unlocked Bootloader,
I have CWM installed. However, the USB storage Mount isn't working. "No UMS error"
I can still use CWM, but I don't have any rom in the SDCARD.
I can boot into boot loader, I can see fastboot USB.
I want to install a rom, any rom for now. but I don't have access to the SDcard. I couldn't mount it.
Is there a way to write a file or put a rom on the SDCard?
of course the SDCARD is build-in so yea....
Please help~!!!

i could be wrong, but if you can get to fastboot, cant you flash via RUU? i mean its obviously not a custom rom, but a hell of a lot better than a brick.

most RUU is exe file...
I can flash a stock rom. but I need a .zip rom.
I tried using the one of the custom rom. but it says something about a .txt file missing.

Right, RUUs are exe files intended to be flashed via windows. I thought that you could plug your phone in when in fastboot mode, or maybe its after you select bootloader, and then run the RUU and it would flash the phone. Is that not the case? Those are just my thoughts so i could be wrong. This is my first real HTC experience so i may be way off base.

boot into recovey
flash use.adb
adb push rom.zip /sdcard/rom.zip
Sent from my Galaxy Nexus using XDA

niceppl said:
boot into recovey
flash use.adb
adb push rom.zip /sdcard/rom.zip
Sent from my Galaxy Nexus using XDA
Click to expand...
Click to collapse
When u say boot into recovery do you mean CWM?
sorry i am so new this

I have try using ADB to push it.
But seems like without an OS already install... and WHEN I AM IN CWM, ADB doesn't recognize the phone.
The only thing that seem to recognize the phone is FAstboot,

jzhang0818 said:
I have try using ADB to push it.
But seems like without an OS already install... and WHEN I AM IN CWM, ADB doesn't recognize the phone.
The only thing that seem to recognize the phone is FAstboot,
Click to expand...
Click to collapse
flash this cwm
http://forum.xda-developers.com/showthread.php?t=1677304
if you are on windows, make sure you have the adb driver installed for the phone...check the device manager...make sure it's not a question mark

I have flashed the new CWM you gave me.
ADB works now.
but the weird thing is. Afert i did
adb push rom.zip /sdcard/rom.zip
I reboot to recovery
and try using install zip from sdcard. There was no file in it.
I am not sure what went wrong.
Please HELP.
I am using a MAC...

jzhang0818 said:
I have flashed the new CWM you gave me.
ADB works now.
but the weird thing is. Afert i did
adb push rom.zip /sdcard/rom.zip
I reboot to recovery
and try using install zip from sdcard. There was no file in it.
I am not sure what went wrong.
Please HELP.
I am using a MAC...
Click to expand...
Click to collapse
...good mac
try this..
adb push rom.zip /sdcard/Download/rom.zip
or
adb push rom.zip /sdcard/download/rom.zip

IT all works now...
Thank you very much.
I learn so much from this error.
Thank you very very much

jzhang0818 said:
IT all works now...
Thank you very much.
I learn so much from this error.
Thank you very very much
Click to expand...
Click to collapse
nice..lol...

A very similar problem
Hi all,
I've gotten myself into a very similar problem, but the solution posted here hasn't fixed my issue.
I have an HTC One X 2.20 on AT&T. I used the X-Factor exploit to root my phone successfully. I have TWRP 2.3.1 recovery. I have a Mac.
While in TWRP recovery, I pressed "Factory Reset", "Wiped System", and wiped "External Storage." My phone now doesn't have an OS.
I tried the listed solution "adb push rom.zip /sdcard/Download/rom.zip" and the newly flashed ROM would be on my SDcard, but as soon as I rebooted, it would disappear. ALSO, when I tried to "Install" the ROM before rebooting, I get "Failed- unable to mount /sdcard".
Any advice on how to proceed?
Thanks so much!

ayhindot said:
While in TWRP recovery, I pressed "Factory Reset", "Wiped System", and wiped "External Storage." My phone now doesn't have an OS.
Click to expand...
Click to collapse
Well, wiping /system = wiping the OS, so that is logical.
Doing factory reset in recovery means you need to reformat your SD card before doing anything else.

ayhindot said:
Hi all,
I've gotten myself into a very similar problem, but the solution posted here hasn't fixed my issue.
I have an HTC One X 2.20 on AT&T. I used the X-Factor exploit to root my phone successfully. I have TWRP 2.3.1 recovery. I have a Mac.
While in TWRP recovery, I pressed "Factory Reset", "Wiped System", and wiped "External Storage." My phone now doesn't have an OS.
I tried the listed solution "adb push rom.zip /sdcard/Download/rom.zip" and the newly flashed ROM would be on my SDcard, but as soon as I rebooted, it would disappear. ALSO, when I tried to "Install" the ROM before rebooting, I get "Failed- unable to mount /sdcard".
Any advice on how to proceed?
Thanks so much!
Click to expand...
Click to collapse
Can you get into TWRP? If so, just mount the USB via TWRP and put the ROM on your SD card and install it.

pside15 said:
Can you get into TWRP? If so, just mount the USB via TWRP and put the ROM on your SD card and install it.
Click to expand...
Click to collapse
I'm having the same problem with no OS being installed and I am unable to get to either the bootloader or recovery. When rebooting I can't get past the HTC quietly brilliant splash screen. I've been using the tool here: http://forum.xda-developers.com/showthread.php?t=1952426 but it can't reach the phone. What are my options now?

ltjska04 said:
I'm having the same problem with no OS being installed and I am unable to get to either the bootloader or recovery. When rebooting I can't get past the HTC quietly brilliant splash screen. I've been using the tool here: http://forum.xda-developers.com/showthread.php?t=1952426 but it can't reach the phone. What are my options now?
Click to expand...
Click to collapse
Have you successfully unlocked your bootloader using that tool?
---------- Post added at 04:14 PM ---------- Previous post was at 04:08 PM ----------
ayhindot said:
Hi all,
I've gotten myself into a very similar problem, but the solution posted here hasn't fixed my issue.
I have an HTC One X 2.20 on AT&T. I used the X-Factor exploit to root my phone successfully. I have TWRP 2.3.1 recovery. I have a Mac.
While in TWRP recovery, I pressed "Factory Reset", "Wiped System", and wiped "External Storage." My phone now doesn't have an OS.
I tried the listed solution "adb push rom.zip /sdcard/Download/rom.zip" and the newly flashed ROM would be on my SDcard, but as soon as I rebooted, it would disappear. ALSO, when I tried to "Install" the ROM before rebooting, I get "Failed- unable to mount /sdcard".
Any advice on how to proceed?
Thanks so much!
Click to expand...
Click to collapse
I think you need to uncheck "Unmount sdcard" under "Mount" in TWRP recovery.

Tried everything... still not working
niceppl said:
nice..lol...
Click to expand...
Click to collapse
Hi, Brand new Noob here, but hoping someone can help…I’ve had a good scour around and can’t find the answer. We have a Htc one x from orange uk (cid orang001) stuck at “quietly brilliant” screen following an attempt to load ViperX 2.6.0. After downloading, the MAC unzipped the ROM so this was just rezipped back up and transferred over to the SD card, without any special conditions. ( I’ve since read somewhere that this might cause issues)
USB debugger was enabled but its not possible to enable it now.
Fastboot works ok, and we’ve flashed the boot ok, but ADP isn’t working, so it isn’t possible to push the correct ROM.ZIP to the SDcard. CWM is installed.
We’ve seen the post for an updated CWM with ADP enabled on this here but that states its only for at&t models. If we could get ADP working we’d be able to push the correct ROM over, so this would seem the easiest way if possible.
I wanted to avoid doing a RUU in case the phone would end up bricked, but I can’t get the correct version anyway.
Command ./fastboot getvar version-main returns
version-main: 3.16.61.6 and the noob guide at
http://forum.xda-developers.com/showthread.php?t=1859714 says we can’t use a lower version….the nearest RUU I can find is 1.29.061.11 (released on 31/01/2013).
Any ideas on how best to recover this phone? The issue might not be anything to do with the zipping of the ROM, but then I have no idea why its not working…I’m hoping it’s a simple procedure, but I fear it may not be! Please Help!

LiamKenny said:
Hi, Brand new Noob here, but hoping someone can help…I’ve had a good scour around and can’t find the answer. We have a Htc one x from orange uk (cid orang001) stuck at “quietly brilliant” screen following an attempt to load ViperX 2.6.0. After downloading, the MAC unzipped the ROM so this was just rezipped back up and transferred over to the SD card, without any special conditions. ( I’ve since read somewhere that this might cause issues)
USB debugger was enabled but its not possible to enable it now.
Fastboot works ok, and we’ve flashed the boot ok, but ADP isn’t working, so it isn’t possible to push the correct ROM.ZIP to the SDcard. CWM is installed.
We’ve seen the post for an updated CWM with ADP enabled on this here but that states its only for at&t models. If we could get ADP working we’d be able to push the correct ROM over, so this would seem the easiest way if possible.
I wanted to avoid doing a RUU in case the phone would end up bricked, but I can’t get the correct version anyway.
Command ./fastboot getvar version-main returns
version-main: 3.16.61.6 and the noob guide at
http://forum.xda-developers.com/showthread.php?t=1859714 says we can’t use a lower version….the nearest RUU I can find is 1.29.061.11 (released on 31/01/2013).
Any ideas on how best to recover this phone? The issue might not be anything to do with the zipping of the ROM, but then I have no idea why its not working…I’m hoping it’s a simple procedure, but I fear it may not be! Please Help!
Click to expand...
Click to collapse
Wrong forum. This is for the S4 One XL. You have a Tegra 3 One X. Anything you flash from here may brick your phone.

iElvis said:
Wrong forum. This is for the S4 One XL. You have a Tegra 3 One X. Anything you flash from here may brick your phone.
Click to expand...
Click to collapse
oops, sorry :/

Rooted 2.20 now cant boot my phone

Hi Everyone,
So i followed all the steps to temp root 2.20 including successfully installing TWRP (Team Win Recovery Project). I then downloaded the CM10 rom and extracted the boot.img as per posts and rebooted into the bootloader and flashed the boot.img from CM10 via Fastboot. However after doing then rebooting to Recovery mode in order to flash the ROM, i get stuck in the red text where it gives you a warning about it being in development mode or something.
I am able to successfully boot into the bootloader via Power+down volume. Additionally I am able to boot into the TWRP recovery just fine, however I am lost and have no clue how to restore my phone to either the CM10 ROM or most importantly at least to stock working condition.
When i got to mount the SDCARD via twrp normally i would get a pop up on my screen and allow me to access my SD card, now i get a pop up just telling me that i need to format my SD card first. I'm afraid some how my SD card got wiped or something.
Can someone please walk me through the steps on how to restore my phone. Please if possible i would appreciate using LAME terms as i do not have any experience as you can tell i screwed up :/ Can you please listed step by step instructions including commands for Fastboot/adb etc etc if needed. Thank you very much for your help and support.

I've typed and retyped a response to help. I'm so tired and my brain is mush. (More so than normal) if you can't find any resolution by morning? Pm me and I'll try and help. Something about pluggin the USB in The back of your pc something something....... snore
Sent from my One X using xda premium

subarudroid said:
I've typed and retyped a response to help. I'm so tired and my brain is mush. (More so than normal) if you can't find any resolution by morning? Pm me and I'll try and help. Something about pluggin the USB in The back of your pc something something....... snore
Sent from my One X using xda premium
Click to expand...
Click to collapse
I know you tried to help, but it appears now I have bricked the phone. Hopefully i can fix it as i still have access to Bootloader and TWRP recovery. I'll PM you in the morning, thank you.

dont factory reset in bootloader. only factory reset in twrp. sometimes evita has a hard time getting into recovery from bootloader. just keep trying to get into recovery from bootloader. also even if your phone doesn't boot all the way adb sometimes still works. so try "adb reboot recovery" while its trying to boot.
if you did corrupt your sdcard try this method to get it fixed without having to run ruu.
[How to] Fix corrupt/unmountable internal storage on the HTC One X/XL
when you get your sdcard fixed remember to wipe everything and then copy cm10 and gapps to your sdcard and flash. since boot.img is already flashed you shouldn't need to do it again.
you did flash boot.img as "fastboot flash boot boot.img"? i made the mistake of flashing boot.img to recovery instead of boot. i was freaking out. just to make sure flash recovery again "fastboot flash recovery openrecovery-twrp-2.3.1.0-evita.img"

DvineLord said:
dont factory reset in bootloader. only factory reset in twrp. sometimes evita has a hard time getting into recovery from bootloader. just keep trying to get into recovery from bootloader. also even if your phone doesn't boot all the way adb sometimes still works. so try "adb reboot recovery" while its trying to boot.
if you did corrupt your sdcard try this method to get it fixed without having to run ruu.
[How to] Fix corrupt/unmountable internal storage on the HTC One X/XL
when you get your sdcard fixed remember to wipe everything and then copy cm10 and gapps to your sdcard and flash. since boot.img is already flashed you shouldn't need to do it again.
you did flash boot.img as "fastboot flash boot boot.img"? i made the mistake of flashing boot.img to recovery instead of boot. i was freaking out. just to make sure flash recovery again "fastboot flash recovery openrecovery-twrp-2.3.1.0-evita.img"
Click to expand...
Click to collapse
Yes i did fastboot flash boot boot.img from within the Bootlader. FYI that boot.img was from inside the CM10 zip file. I belive my SD card is corrupt i will check out that link. FYI I am able to get into Recovery mode form the Boatloader if i chooser recovery. However since the SD card seems messed up i can't access it currently. Also I tried to use the method to install the CM10.zip file using TWRP recovery. That recovery has a GUI and you can click on the INSTALL button and choose the zip file you want to install, however it errors out.
What is the proper way to flash a rom when i am in the TWRP recovery? Can you provide me with the commands/steps? Thanks for all your support guys.

movadoevo8 said:
Yes i did fastboot flash boot boot.img from within the Bootlader. FYI that boot.img was from inside the CM10 zip file. I belive my SD card is corrupt i will check out that link. FYI I am able to get into Recovery mode form the Boatloader if i chooser recovery. However since the SD card seems messed up i can't access it currently. Also I tried to use the method to install the CM10.zip file using TWRP recovery. That recovery has a GUI and you can click on the INSTALL button and choose the zip file you want to install, however it errors out.
What is the proper way to flash a rom when i am in the TWRP recovery? Can you provide me with the commands/steps? Thanks for all your support guys.
Click to expand...
Click to collapse
install/install from zip/browse to your zip/slide to flash (they really should patent that)
now most of us, to do a clean flash, we'd go into the "wipe" menu in TWRP before flashing , factory reset, wipe cache, wipe dalvik cache, wipe system. then we flash our rom.
hope that cleared it up!
Sent from my One X using xda premium

You won't be able to flash anything until you fixed your sdcard using the method in that link.

Ptesmoke where have you been? DvineLord is the only one been helping here. The Q&A thread is a mess. where is edditsync chongo, rohan and the other superhero's. I feel like Hawkeye trying to shoot sh#@ down with a bow and arrow. Waiting for ironman, hulk, Thor and the other avengers to get real sh#@ done. I'm tired going to sleep now.
Sent from my One X using xda premium

ptesmoke said:
install/install from zip/browse to your zip/slide to flash (they really should patent that)
now most of us, to do a clean flash, we'd go into the "wipe" menu in TWRP before flashing , factory reset, wipe cache, wipe dalvik cache, wipe system. then we flash our rom.
hope that cleared it up!
Sent from my One X using xda premium
Click to expand...
Click to collapse
I tried to fixed corrupted SD card as per video. however after flashing the recovery.img via fastboot when it wants me to do a factory reset instead of doing the factory reset it just goes back to the HTC brilliant screen with the red warning text and sits there. If i go to twpr recovery and click on install i can't access me zip currently due to sd card issues.
Is there a way to format via PC since it lets me as long as I am in twpr and just put stock files/folders onto the SD card? Or is it possible to install the 2.20 ruu again? I re-downloaded it form HTC's site while I am in twrp however I cannot install it won't detect my phone. Thanks for your help.

"fastboot oem lock" then run ruu. ruu gets run in fastboot.
after the ruu, reunlock bootloader and flash twrp, copy cm10 and gapps to your sdcard, flash boot.img in fastboot, wipe everything except for external storage in twrp, flash cm10 and gapps in twrp, then reboot.

If you can get into twrp and go to mount, mount usb storage and connect your phone windows should prompt you to format the SD card.
Once that's done you can drag and drop the rom you want to flash then boot into fastboot and flash the boot.img.
If you want to run the ruu you need to relock the bootloader first.
To do that you must go into fastboot usb and then type fastboot oem lock.
Sent from my HTC One XL using xda premium

DvineLord said:
"fastboot oem lock" then run ruu. ruu gets run in fastboot.
after the ruu, reunlock bootloader and flash twrp, copy cm10 and gapps to your sdcard, flash boot.img in fastboot, wipe everything except for external storage in twrp, flash cm10 and gapps in twrp, then reboot.
Click to expand...
Click to collapse
I'm sorry i'm not too tech savy. Can you clarify how to Fastboot OEM lock. Assuming i just need to be in fastboot mode and run a command in command prompt?
Also once that is done how can i run RUU via fastboot? Right now i have HTC RUU for 2.20 from august that i downloaded from their site and not sure how i can have it detect my phone. If you could clarify and explain those steps in Lame terms i would greatly appreciate it, thanks in advance.

movadoevo8 said:
I'm sorry i'm not too tech savy. Can you clarify how to Fastboot OEM lock. Assuming i just need to be in fastboot mode and run a command in command prompt?
Also once that is done how can i run RUU via fastboot? Right now i have HTC RUU for 2.20 from august that i downloaded from their site and not sure how i can have it detect my phone. If you could clarify and explain those steps in Lame terms i would greatly appreciate it, thanks in advance.
Click to expand...
Click to collapse
That's the command you do and the ruu is an exe file so get into fastnoot on your phone from bl and run the ruu after you've locked the bootloader

Thank you both will try that now.

Hey guys thanks for all your help and your support it worked. I had the wrong CM10 file instead of Evita i had the other one :/ That was the issue all along ugh... but all resolved could of not have done it without your support. Thanks!! I can now finally go to bed.. been at it since 10pm, now 3:11am

Maybe you can help me . I'm having the same problem. The problem is, everytime I try to use any fastboot commands, it'll say "waiting for device". I'm stressing out.

marcur12 said:
Maybe you can help me . I'm having the same problem. The problem is, everytime I try to use any fastboot commands, it'll say "waiting for device". I'm stressing out.
Click to expand...
Click to collapse
Make sure you have the right drivers installed, download the latest htc sync from htc's website.
Install HTC sync connect phone and let the drivers install, then make sure you close htc sync from the system tray and try again.
Like DvineLord said below make sure you're in the bootloader then select Fastboot once selected it should say in red writing Fastboot USB.

fastboot only works in bootloader btw

Hit the thanks button for the people helping you fix your boo boos.
If you can type it, click it for them, least you can do in return.
WR
Sent from my HTC One X

Sent from my HTC One XL using Tapatalk 2

[Q] Really Hard Brick.. I think..

HELP TO ALL THE COMMUNITY ASAP!!!
here is the deal, i had the HTC One S Rooted fine, it was working but i tried now to install a custom rom, baked black beans, but now i've downloaded the rom, set it in my HTC, accessed CMW, wiped data, installed from sd, rebooted, went to bootloader, run boot.img on cmd on computer, restarted and now i am getting the HTC Bootloader that states that "This build is for development purporses etc. etc.." now here is the deal guys... i was able to get to bootloader then to recovery, i check the sd files in clockwork recovery and nothing!! all i want now is just stock and try again.. guys.. help???
URGENT!!

therion0 said:
HELP TO ALL THE COMMUNITY ASAP!!!
here is the deal, i had the HTC One S Rooted fine, it was working but i tried now to install a custom rom, baked black beans, but now i've downloaded the rom, set it in my HTC, accessed CMW, wiped data, installed from sd, rebooted, went to bootloader, run boot.img on cmd on computer, restarted and now i am getting the HTC Bootloader that states that "This build is for development purporses etc. etc.." now here is the deal guys... i was able to get to bootloader then to recovery, i check the sd files in clockwork recovery and nothing!! all i want now is just stock and try again.. guys.. help???
URGENT!!
Click to expand...
Click to collapse
CWM cant mount SD you need TWRP for that and a RUU put you back to stock but the bootloader needs relocking. So did you even try booting the rom because the red writing is fine.

you didn't mention it, but you should wipe system and caches as well as data

Not hard brick. you can chose the correct Ruu file and flash it to your phone.... solved your case.

Darknites said:
CWM cant mount SD you need TWRP for that
Click to expand...
Click to collapse
CWM can not mount our sdcard onto your computer over USB.
But it absolutely can mount the sdcard partition onto the root filesystem.
Unless you have the 'unmountable sdcard' problem, for which there is a sticky in Q&A.
My feeling is that the OP didnt mount the sdcard partition. In that case it is normal to see the mount point as an empty folder.
Once it's mounted, you can adb push rom zips to it.

touch of jobo said:
CWM can not mount our sdcard onto your computer over USB.
But it absolutely can mount the sdcard partition onto the root filesystem.
Unless you have the 'unmountable sdcard' problem, for which there is a sticky in Q&A.
My feeling is that the OP didnt mount the sdcard partition. In that case it is normal to see the mount point as an empty folder.
Once it's mounted, you can adb push rom zips to it.
Click to expand...
Click to collapse
Oh right seems a lot work lol, I think I stick to TWRP.

Darknites said:
Oh right seems a lot work lol, I think I stick to TWRP.
Click to expand...
Click to collapse
+1, 2 & 3!
Really don't understand why anyone still uses CWM, I think its just habit with some people.

shadowch31 said:
+1, 2 & 3!
Really don't understand why anyone still uses CWM, I think its just habit with some people.
Click to expand...
Click to collapse
Habit and guides.

I thought I saw a post that mentioned cwm has not kept up to date--not sure
But, I was a slow convert too and very happy with twrp 2.2.2.0

rugmankc said:
I thought I saw a post that mentioned cwm has not kept up to date--not sure
But, I was a slow convert too and very happy with twrp 2.2.2.0
Click to expand...
Click to collapse
I not seen updates but then I not looked and I didn't move over in till it got the usb mount.

when i run the CMD Command prompt adb reboot bootloader I get error: device not found, i was able to flash the boot.img and i got the 2 OKs but i get that error now... what now?

Also, when i go to recovery mode, i don't see any files to install the .zip file of the rom i want to install

therion0 said:
Also, when i go to recovery mode, i don't see any files to install the .zip file of the rom i want to install
Click to expand...
Click to collapse
You lost SD then and best off running a RUU to recover it.

ok i'm lost.. how do i run an RUU to recover it?

therion0 said:
ok i'm lost.. how do i run an RUU to recover it?
Click to expand...
Click to collapse
Download the right RUU for your carrier and location by looking at http://forum.xda-developers.com/showthread.php?t=1543588 and you can get free download at http://www.4shared.com/folder/jKN2qjTl/HTC_Ville_RUU_Collection.html
Then plug in your phone and follow the instructions when you run the RUU .exe file.
AKToronto

but everytime i try to run it, it says it fails because the phone it is not connected to the computer but it is...

did you ever try to boot into the rom after you flashed it and boot image as in just tapping on reboot system
can you plug phone into pc and get indicator at top of screen that says you are connected. then pull down notification bar and select to mount drive
if so, does it show you your sdcard in the windows screen
you do have an S4 device and assume you are hboot .13 or higher
if you can get into os and see sdcard, you can get twrp and flash image gui and flash rom and boot image with it
i am sure you tried these things, just hard to know when reading posts
also, i don't know if you are running your commands correctly based on how i undestand your posts. you can't run adb commands from fastboot, which is what you were in to fastboot boot image. you would want to type fastboot reboot-bootloader
if you are very familiar with adb/fastboot--sorry. if not need to get up to speed on them
if i misread or misunderstood any of this, sorry for butting in--

rugmankc said:
did you ever try to boot into the rom after you flashed it and boot image as in just tapping on reboot system
can you plug phone into pc and get indicator at top of screen that says you are connected. then pull down notification bar and select to mount drive
if so, does it show you your sdcard in the windows screen
you do have an S4 device and assume you are hboot .13 or higher
if you can get into os and see sdcard, you can get twrp and flash image gui and flash rom and boot image with it
i am sure you tried these things, just hard to know when reading posts
also, i don't know if you are running your commands correctly based on how i undestand your posts. you can't run adb commands from fastboot, which is what you were in to fastboot boot image. you would want to type fastboot reboot-bootloader
if you are very familiar with adb/fastboot--sorry. if not need to get up to speed on them
if i misread or misunderstood any of this, sorry for butting in--
Click to expand...
Click to collapse
Ya he messed it up so needs RUU. He has PM me just waiting on a reply.

[Q] stuck in boot loop / pc not recognizing phone with adb

Hi,
I tried to install a ROM but it got stuck on the white screen with the HTC logo. I tried to do factory reset but it gets stuck again. I don't have clockwork recovery, and I rooted my phone using adb and ace recovery, which is not on my phone. I only temporarily used it to flash my rom, stupid I know. :-/ When I connect my phone to the PC it is not being recognized. I tried putting the PD98IMG.zip file on my sd card but it just says that it the image is incorrect. Is there anything I can do? Is this fixable?

brickdummy said:
Hi,
I tried to install a ROM but it got stuck on the white screen with the HTC logo. I tried to do factory reset but it gets stuck again. I don't have clockwork recovery, and I rooted my phone using adb and ace recovery, which is not on my phone. I only temporarily used it to flash my rom, stupid I know. :-/ When I connect my phone to the PC it is not being recognized. I tried putting the PD98IMG.zip file on my sd card but it just says that it the image is incorrect. Is there anything I can do? Is this fixable?
Click to expand...
Click to collapse
Flash a recovery.img from fastboot. What is an ace recovery? Read my signature for the HTC logo problem.

brickdummy said:
Hi,
I tried to install a ROM but it got stuck on the white screen with the HTC logo. I tried to do factory reset but it gets stuck again. I don't have clockwork recovery, and I rooted my phone using adb and ace recovery, which is not on my phone. I only temporarily used it to flash my rom, stupid I know. :-/ When I connect my phone to the PC it is not being recognized. I tried putting the PD98IMG.zip file on my sd card but it just says that it the image is incorrect. Is there anything I can do? Is this fixable?
Click to expand...
Click to collapse
I just went through some similar stuff. What type of computer are you using? PC/Mac? Are you using the original cable? What troubleshooting steps for connectivity have you done? Different cable? USB port?
Can you access the bootloader screen when you pull the battery and reboot while holding the volume button down and holding the power button? By accident, I found that the phone and PC will communicate with each other when "Fastboot" is selected on the bootloader screen (you should hear a connection chime and it should change to "Fastboot USB") except I could only get fastboot commands to work. The good news is that should be enough to flash a boot or whatever else you need to get back in business.

shadowboxx said:
I just went through some similar stuff. What type of computer are you using? PC/Mac? Are you using the original cable? What troubleshooting steps for connectivity have you done? Different cable? USB port?
Can you access the bootloader screen when you pull the battery and reboot while holding the volume button down and holding the power button? By accident, I found that the phone and PC will communicate with each other when "Fastboot" is selected on the bootloader screen (you should hear a connection chime and it should change to "Fastboot USB") except I could only get fastboot commands to work. The good news is that should be enough to flash a boot or whatever else you need to get back in business.
Click to expand...
Click to collapse
Hi, Thanks for the reply.I am using windows 7. I downloaded the drivers for HTC, and I am using a data cable and the USB port in the back of my computer, nearest the mother board. I do see "Fastboot USB" on the phone but when i type in the command prompt "adb devices" I get nothing.

brickdummy said:
Hi, Thanks for the reply.I am using windows 7. I downloaded the drivers for HTC, and I am using a data cable and the USB port in the back of my computer, nearest the mother board. I do see "Fastboot USB" on the phone but when i type in the command prompt "adb devices" I get nothing.
Click to expand...
Click to collapse
That's great you're getting the fastboot usb message! As long as you're not using a hub or some other usb extender, any functioning usb port on the pc will do. Again, I learned this by accident (ie the hard way) and found that in this mode, only fastboot commands will work, not adb. (on a side note, and others should correct me here, adb and fastboot work together when the phone is rebooted normally or in recovery but not in the bootloader screen)
Great test for connection: fastboot devices (if you get anything else except a serial # with fastboot after it, then close the cmd window, unplug, and pull battery/reboot to bootloader), fastboot reboot-bootloader. Once it reboots back into the bootloader screen, make sure you press the power button while fastboot is selected and you should again hear the chime and see fastboot usb come up. This is your phone saying it's ready to accept your fastboot commands.
Do let us know how it works.

bananagranola said:
Flash a recovery.img from fastboot. What is an ace recovery? Read my signature for the HTC logo problem.
Click to expand...
Click to collapse
Hi I actually saw your post earlier thank you. I will work on this. I found it in a tutorial when I rooted my phone with HTC dev, ace_recovery_ext_4.img. I'll post where i found it later.

bananagranola said:
Flash a recovery.img from fastboot. What is an ace recovery? Read my signature for the HTC logo problem.
Click to expand...
Click to collapse
when i flashboot the recovery.img file it goes to the red triangle.

brickdummy said:
Hi I actually saw your post earlier thank you. I will work on this. I found it in a tutorial when I rooted my phone with HTC dev, ace_recovery_ext_4.img. I'll post where i found it later.
Click to expand...
Click to collapse
Hi the program is actually called 4EXT Recovery Touch. I finally was able to open it through fastboot....Now all thats left is to find the right zip file to put my phone back to stock.

shadowboxx said:
That's great you're getting the fastboot usb message! As long as you're not using a hub or some other usb extender, any functioning usb port on the pc will do. Again, I learned this by accident (ie the hard way) and found that in this mode, only fastboot commands will work, not adb. (on a side note, and others should correct me here, adb and fastboot work together when the phone is rebooted normally or in recovery but not in the bootloader screen)
Great test for connection: fastboot devices (if you get anything else except a serial # with fastboot after it, then close the cmd window, unplug, and pull battery/reboot to bootloader), fastboot reboot-bootloader. Once it reboots back into the bootloader screen, make sure you press the power button while fastboot is selected and you should again hear the chime and see fastboot usb come up. This is your phone saying it's ready to accept your fastboot commands.
Do let us know how it works.
Click to expand...
Click to collapse
Hi, this did work, thank you. Would you happen to know how i can load the stock software on my phone? I had it rooted before im not sure if its still rooted. I also managed to get the 4ext recovery on my phone too.

shadowboxx said:
(on a side note, and others should correct me here, adb and fastboot work together when the phone is rebooted normally or in recovery but not in the bootloader screen)
Click to expand...
Click to collapse
As far as I know, fastboot only works when your phone is in fastboot mode. ADB works in recovery or system.
brickdummy said:
Hi, this did work, thank you. Would you happen to know how i can load the stock software on my phone? I had it rooted before im not sure if its still rooted. I also managed to get the 4ext recovery on my phone too.
Click to expand...
Click to collapse
Flash a rooted stock ROM from recovery. Whether you have root is in your system partition. Whether your bootloader is unlocked is in your bootloader. Whether you have a custom recovery is in your recovery partition. Three separate things.
As for your post in your other thread, read my signature.

bananagranola said:
As far as I know, fastboot only works when your phone is in fastboot mode. ADB works in recovery or system.
Flash a rooted stock ROM from recovery. Whether you have root is in your system partition. Whether your bootloader is unlocked is in your bootloader. Whether you have a custom recovery is in your recovery partition. Three separate things.
Click to expand...
Click to collapse
I'm sorry, I have no idea what I am doing. Can you show me the steps? When I try installing a stock rom zip file in my recovery from my sd card it aborts.

brickdummy said:
I'm sorry, I have no idea what I am doing. Can you show me the steps? When I try installing a stock rom zip file in my recovery from my sd card it aborts.
Click to expand...
Click to collapse
I'm guessing that you're trying to flash a PD98IMG.zip or a RUU. You need an actual stock rooted ROM, probably from here on the forum. Or just flash Android Revolution HD, an optimized rooted stock ROM, also from here on the forum in the development section. For more specific steps read the Ace Think Tank linked in my signature.

bananagranola said:
I'm guessing that you're trying to flash a PD98IMG.zip or a RUU. You need an actual stock rooted ROM, probably from here on the forum. Or just flash Android Revolution HD, an optimized rooted stock ROM, also from here on the forum in the development section. For more specific steps read the Ace Think Tank linked in my signature.
Click to expand...
Click to collapse
Ok, one more thing. I have S-ON. does that matter?
----
It did not, lol anyway it worked. Thank you everyone for you help. I really appreciate it.
-----
For those wondering I found the stock rooted rom here http://http://forum.xda-developers.com/showthread.php?t=996368
http://forum.xda-developers.com/showthread.php?p=26617631
Instructions to flash the rom
http://http://forum.xda-developers.com/showthread.php?t=2168500

brickdummy said:
Ok, one more thing. I have S-ON. does that matter?
Click to expand...
Click to collapse
Yes. You need to read the part in my signature about being stuck in the splash screen.

bananagranola said:
Yes. You need to read the part in my signature about being stuck in the splash screen.
Click to expand...
Click to collapse
ok, got it. Thank you again

Dear friends,
I have this problem: I got a brand new TCL S720 and the Google Play did not work, being a known rom issue. So, before doing anything, I've managed to make a backup of it's original rom with MTK Droid tools whichI supose it did it well. Then I've tried to install a CWM recovery to try a custom rom for it. The CWM recovery seemed to install succesfully but I didn't manage to install the new rom. If I remember well, it stucked on boot logo. Then tried to revert at it's original stock recovery, managed to have the phone back as it was in initial state, but doing more tries, It remained stucked on boot logo. The problem is that my computer doesn't recognise it anymore, when I connect it to USB it tries to install MTP usb driver but even before the driver was installed well, now it refuse to install, like the driver is not good or the proper driver doesn't exist. So the only thing I can do is to boot on stock recovery but even I tried to copy the original rom update.zip on external SD and to flash the phone using install update from sd card in recovery mode, It doesn't find the external sd card. So I'm stuck here, the computer doesn't detect the phone to try flashing it with SP flash tool or MTK Droid tool, and I also can't flash it from sd card. Have you any idea how to make it work again?
Thanks in advance.

Help save my Sensation

I have an XE, HBOOT 1.27 Unlocked and S-ON and I flashed many ROMs, always enabling SmartFlash in 4Ext.
Yesterday I tried to flash Sebastian's ROM, Revelation, and now my phone is stuck at HTC Splash Screen.
First I did a nandroid to my current ROM, Pac 1.1, then format all(except SD Card), then flashed Revelation and something went wrong.
After flash complete I confirmed reboot and right before 4Ext closed, it showed a message saying something like : It has been detected a change in your boot partition, a backup of previous has been made in /sdcard/4Ext/boot.
It stays like that for a few seconds(I always had this message when flashed other ROMs) and soon after says something "there has been an error, report it" (never seen this message before) and reboots, but keeps showing Splash Screen for ~5 seconds, turns black, then Splash Screen again and so on until I remove the battery.
What can I do and how?
Someone told me to push via fastboot the ROM's boot.img but there is a problem.I have a PC where the phone has never been connected via USB cable, so I have no driver/tool anything.
When I connect it to PC, nothing shows up.
If I select FASTBOOT from the bootloader menu, still nothing shows up on PC.I tried from 4Ext menu Toggle usb connection, but still no trace on my PC.
I beg you, help me.
EDIT : I just found out that Sebastian messed up something in the installer, and all I have to do is to flash the boot.img through fastboot.

doublin said:
I have an XE, HBOOT 1.27 Unlocked and S-ON and I flashed many ROMs, always enabling SmartFlash in 4Ext.
Yesterday I tried to flash Sebastian's ROM, Revelation, and now my phone is stuck at HTC Splash Screen.
First I did a nandroid to my current ROM, Pac 1.1, then format all(except SD Card), then flashed Revelation and something went wrong.
After flash complete I confirmed reboot and right before 4Ext closed, it showed a message saying something like : It has been detected a change in your boot partition, a backup of previous has been made in /sdcard/4Ext/boot.
It stays like that for a few seconds(I always had this message when flashed other ROMs) and soon after says something "there has been an error, report it" (never seen this message before) and reboots, but keeps showing Splash Screen for ~5 seconds, turns black, then Splash Screen again and so on until I remove the battery.
What can I do and how?
Someone told me to push via fastboot the ROM's boot.img but there is a problem.I have a PC where the phone has never been connected via USB cable, so I have no driver/tool anything.
When I connect it to PC, nothing shows up.
If I select FASTBOOT from the bootloader menu, still nothing shows up on PC.I tried from 4Ext menu Toggle usb connection, but still no trace on my PC.
I beg you, help me.
Click to expand...
Click to collapse
Hi,
Try flashing a STOCK ROM
Choose the XE in the second post.
Otherwise you will have to setup your PC to run a RUU,and return everything back to square one.

The weird thing is that even if I try to flash another ROM, stil the same problem.
I format all except SD card,wipe cache+dalvik, mount SD card into PC and delete folder 4Ext/boot_backup.
Go back to 4Ext, enable SmartFlash and flash CM 10.1 by Albino . Reboot, I get the message about my boot partition has been modified, but not the error too, and when it reboots, stuck at splash screen.
I'm desperate.

doublin said:
The weird thing is that even if I try to flash another ROM, stil the same problem.
I format all except SD card,wipe cache+dalvik, mount SD card into PC and delete folder 4Ext/boot_backup.
Go back to 4Ext, enable SmartFlash and flash CM 10.1 by Albino . Reboot, I get the message about my boot partition has been modified, but not the error too, and when it reboots, stuck at splash screen.
I'm desperate.
Click to expand...
Click to collapse
Hi,
It looks like your only option to reconfigure your boot partition ,is to run a RUU.
Look HERE
Do you know the version-main of your phone?
But first you will also need to setup your PC for ADB.
Look HERE

malybru said:
Hi,
It looks like your only option to reconfigure your boot partition ,is to run a RUU.
Look HERE
Do you know the version-main of your phone?
But first you will also need to setup your PC for ADB.
Look HERE
Click to expand...
Click to collapse
Ok thank you for your links.
I'll try to do it tomorrow `cause right now I can't keep my concentration, too late and had a long day.

malybru said:
Hi,
It looks like your only option to reconfigure your boot partition ,is to run a RUU.
Look HERE
Do you know the version-main of your phone?
But first you will also need to setup your PC for ADB.
Look HERE
Click to expand...
Click to collapse
actually if he setup the pc with adb and fastboot files he will be able to flash the boot.img manually
so why the ruu.exe?

rzr86 said:
actually if he setup the pc with adb and fastboot files he will be able to flash the boot.img manually
so why the ruu.exe?
Click to expand...
Click to collapse
I tried that yesterday with the help of a guy, but no success.
I installed all necessary drivers, adb and fastboot, but I can't get my phone discovered on my PC.
If the boot partition would be screwed, why it doesn't work when I try to flash other ROM? Like CM 10.1 or the XE Stock that I've been suggested a few posts above. Flashing this ROMs, shouldn't the boot partition be written with the ROM's files, and everything should turn back as normal?

doublin said:
I tried that yesterday with the help of a guy, but no success.
I installed all necessary drivers, adb and fastboot, but I can't get my phone discovered on my PC.
If the boot partition would be screwed, why it doesn't work when I try to flash other ROM? Like CM 10.1 or the XE Stock that I've been suggested a few posts above. Flashing this ROMs, shouldn't the boot partition be written with the ROM's files, and everything should turn back as normal?
Click to expand...
Click to collapse
It should rewrite the boot partition. Are you sure 4ext says "a pending update to..." and the process completes?
First boot after a new flash can take as long a 10mins. Wait it out.
Anyway if it diesnt work, try another wipe (all except sdcard) flash another rom, and if you're still stuck, use an ruu.
Happy to help.

Far_SighT said:
It should rewrite the boot partition. Are you sure 4ext says "a pending update to..." and the process completes?
First boot after a new flash can take as long a 10mins. Wait it out.
Anyway if it diesnt work, try another wipe (all except sdcard) flash another rom, and if you're still stuck, use an ruu.
Happy to help.
Click to expand...
Click to collapse
I'm very sure 4ext says "a pending update to..." but only it doesn't completes as usual, instead show an error saying that the process couldn't be completed and the boot partition was reverted back as it was,report the problem. This happens when trying to flash Revelation.
I flashed CM 10.1 and says only " a pending update to..." no error , reboots and keeps turning off and on the splash screen.
I flashed a stock XE ROM, happens same thing as in CM 10.1 case.
I tried restoring from nandroid , happens same as CM 10.1 and stock XE ROM.
I wiped and flashed so many times in the last 2 days that I didn't do in the whole year that I had the phone.
I can't use a RUU, as I'm stuck at getting the phone discovered by PC.As I said, I installed all necessary drivers found on a topic here, but still can't see the phone.I tried HTC Sync also, as that pack installs the drivers too, but still no luck.
My last hope is to try connecting the phone on an older PC that I put it in a box and thrown it in the garage.That PC has all drivers and set-up for the phone, but they are outdated for sure.

doublin said:
I'm very sure 4ext says "a pending update to..." but only it doesn't completes as usual, instead show an error saying that the process couldn't be completed and the boot partition was reverted back as it was,report the problem. This happens when trying to flash Revelation.
I flashed CM 10.1 and says only " a pending update to..." no error , reboots and keeps turning off and on the splash screen.
I flashed a stock XE ROM, happens same thing as in CM 10.1 case.
I tried restoring from nandroid , happens same as CM 10.1 and stock XE ROM.
I wiped and flashed so many times in the last 2 days that I didn't do in the whole year that I had the phone.
I can't use a RUU, as I'm stuck at getting the phone discovered by PC.As I said, I installed all necessary drivers found on a topic here, but still can't see the phone.I tried HTC Sync also, as that pack installs the drivers too, but still no luck.
My last hope is to try connecting the phone on an older PC that I put it in a box and thrown it in the garage.That PC has all drivers and set-up for the phone, but they are outdated for sure.
Click to expand...
Click to collapse
There you go. The reason your phone is in a bootloop is that the correct boot.img is not written.
And something is not right with your recovery. It could be a bad flash (I'm not sure).
I don't think you need to use an ruu. Just get on a pc that recognizes your device, and flash the correct boot.img.
I would advise that you flash the recovery.img again.
EDIT: Change usb port to 2.0. Try all usb ports on your computer. It is quite common that fastboot recognizes devices on some usb ports and not on others.
Alternatively read this, point 4. This will surely work if you can't get another pc

doublin said:
I'm very sure 4ext says "a pending update to..." but only it doesn't completes as usual, instead show an error saying that the process couldn't be completed and the boot partition was reverted back as it was,report the problem. This happens when trying to flash Revelation.
I flashed CM 10.1 and says only " a pending update to..." no error , reboots and keeps turning off and on the splash screen.
I flashed a stock XE ROM, happens same thing as in CM 10.1 case.
I tried restoring from nandroid , happens same as CM 10.1 and stock XE ROM.
I wiped and flashed so many times in the last 2 days that I didn't do in the whole year that I had the phone.
I can't use a RUU, as I'm stuck at getting the phone discovered by PC.As I said, I installed all necessary drivers found on a topic here, but still can't see the phone.I tried HTC Sync also, as that pack installs the drivers too, but still no luck.
My last hope is to try connecting the phone on an older PC that I put it in a box and thrown it in the garage.That PC has all drivers and set-up for the phone, but they are outdated for sure.
Click to expand...
Click to collapse
Hi,
If you need windows 7 & 8 drivers, look HERE
If it worked on your old computer,then,it will still work now.

Far_SighT said:
There you go. The reason your phone is in a bootloop is that the correct boot.img is not written.
And something is not right with your recovery. It could be a bad flash (I'm not sure).
I don't think you need to use an ruu. Just get on a pc that recognizes your device, and flash the correct boot.img.
I would advise that you flash the recovery.img again.
EDIT: Change usb port to 2.0. Try all usb ports on your computer. It is quite common that fastboot recognizes devices on some usb ports and not on others.
Alternatively read this, point 4. This will surely work if you can't get another pc
Click to expand...
Click to collapse
I think this is the key to my problem. I checked the link you gave me and I think I might get it done using that method.
Gonna give it a try as soon as I get some free time later today.
PS : I tried all 3 usb ports on PC, ofc.
Thank you, I will keep this topic update with results.

I'm having a hard time finding the right RUU for my phone, as I don't have access to fastboot, which would make my job a lot easier.
I found a list with providers and CIDs and I suppose mine is HTC-ITA HTC__405 , since I bought it in Italy and it was unbranded.
But i can't get software version, as it asks me to go to setting/About phone . I can't do that.
I think the right RUU is RUU_PYRAMID_LE_ICS_35_S_HTC_Europe_3.32.401.105_R2_Radio_11.69.3504.00U_11.22.3504, so now I'm downloading that and then move on step 4 on that tutorial.
Hope I just won't brick the phone.

doublin said:
I'm having a hard time finding the right RUU for my phone, as I don't have access to fastboot, which would make my job a lot easier.
I found a list with providers and CIDs and I suppose mine is HTC-ITA HTC__405 , since I bought it in Italy and it was unbranded.
But i can't get software version, as it asks me to go to setting/About phone . I can't do that.
I think the right RUU is RUU_PYRAMID_LE_ICS_35_S_HTC_Europe_3.32.401.105_R2_Radio_11.69.3504.00U_11.22.3504, so now I'm downloading that and then move on step 4 on that tutorial.
Hope I just won't brick the phone.
Click to expand...
Click to collapse
You can flash only one particluar ruu. Just make sure it's pyramid le(sensation xe). You will not be able to flash a wrong one, so no need to worry.

Far_SighT said:
You can flash only one particluar ruu. Just make sure it's pyramid le(sensation xe). You will not be able to flash a wrong one, so no need to worry.
Click to expand...
Click to collapse
Yea I'm downloading right now RUU_PYRAMID_LE_ICS_35_S_HTC_Europe_3.32.401.105_R2_Radio_11.69.3504.00U_11.22.3504
Says LE, so I should be fine.

Hi,
The RUU process will not work if the phone says "Unlocked"
You will need to relock the phone,according to the section 3 of the guide.
So,you will need a PC

did you check also if the bootloader screen says fastboot usb?

malybru said:
Hi,
The RUU process will not work if the phone says "Unlocked"
You will need to relock the phone,according to the section 3 of the guide.
So,you will need a PC
Click to expand...
Click to collapse
OOps, forgot that step (I flash ruu via ruu.exe)

malybru said:
Hi,
The RUU process will not work if the phone says "Unlocked"
You will need to relock the phone,according to the section 3 of the guide.
So,you will need a PC
Click to expand...
Click to collapse
But I'm gonna do the step 4 which says only to execute the RUU .exe but don't do anything, and in the temp folder on my pc I will find a file which then I'll have to move to the SD Card and flash straight from my recovery.
rzr86 said:
did you check also if the bootloader screen says fastboot usb?
Click to expand...
Click to collapse
When I vol down & power to get in bootloader I see :
FASTBOOT
RECOVERY
FACTORY RESET
SIM LOCK
IMAGE CRC
I don't know about fastboot usb...
Anyway, selecting FASTBOOT and connecting my phone to PC, nothing shows up, and running fastboot commands doesn't work, there's no link between pc and phone.

doublin said:
But I'm gonna do the step 4 which says only to execute the RUU .exe but don't do anything, and in the temp folder on my pc I will find a file which then I'll have to move to the SD Card and flash straight from my recovery.
When I vol down & power to get in bootloader I see :
FASTBOOT
RECOVERY
FACTORY RESET
SIM LOCK
IMAGE CRC
I don't know about fastboot usb...
Anyway, selecting FASTBOOT and connecting my phone to PC, nothing shows up, and running fastboot commands doesn't work, there's no link between pc and phone.
Click to expand...
Click to collapse
when you select fastboot does it say after that fastboot usb in bootloader screen?
actually have you enabled usb debugging mode from tettings?