Database Info

[Q] Nexus S not working...

I'm going to probably get a lot of hate for this because there are a ton of forums that might get me here. I did search for about 3 hours tonight and discovered some things but am still confused. I hope someone can help this be more simple. So a friend has a Nexus S that isn't working (I have a Nexus S by the by too). It's unlocked but no ClockWork on it. I can press volume up and power to get to fastboot mode. When I click on "reboot," the phone will just loop on the Google logo. If I click recovery, it starts to boot then shows the triangle with the exclamation mark. From there, I can press power and up or down on volume to get the blue screen which says reboot system now, apply update, wipe, wipe. You get it. I'm stuck...I can also turn off the phone, hold volume up/down and plug in the usb to get to "downloading..."
I want to get this phone working and back to stock. I have the SDK Manager (my phone isn't rooted so I use it to take screenshots) and pda net (which I still don't understand why or how to use with this) and two versions of Odin. It seems like Odin can get this working but I can't get it to work or find a clear guide on how to use it and which ones to use. This is a Tmob Nexus S, I think the i9020. Any help would be so greatly appreciated and I will give you all the credit. Oh, and i can pull up the device on ddms with the sdk manager and can explore the files but there is nothing. I can't find a way to drag a file on the phone to "apply update from /sdcard." Sorry again and thanks again!

callison.168 said:
I'm going to probably get a lot of hate for this because there are a ton of forums that might get me here. I did search for about 3 hours tonight and discovered some things but am still confused. I hope someone can help this be more simple. So a friend has a Nexus S that isn't working (I have a Nexus S by the by too). It's unlocked but no ClockWork on it. I can press volume up and power to get to fastboot mode. When I click on "reboot," the phone will just loop on the Google logo. If I click recovery, it starts to boot then shows the triangle with the exclamation mark. From there, I can press power and up or down on volume to get the blue screen which says reboot system now, apply update, wipe, wipe. You get it. I'm stuck...I can also turn off the phone, hold volume up/down and plug in the usb to get to "downloading..."
I want to get this phone working and back to stock. I have the SDK Manager (my phone isn't rooted so I use it to take screenshots) and pda net (which I still don't understand why or how to use with this) and two versions of Odin. It seems like Odin can get this working but I can't get it to work or find a clear guide on how to use it and which ones to use. This is a Tmob Nexus S, I think the i9020. Any help would be so greatly appreciated and I will give you all the credit. Oh, and i can pull up the device on ddms with the sdk manager and can explore the files but there is nothing. I can't find a way to drag a file on the phone to "apply update from /sdcard." Sorry again and thanks again!
Click to expand...
Click to collapse
It seems your boot.img file either corrupted or missing.
Find a working copy of file, flash it via ADB interface or fastboot. Flash recovery file CWM. If that doesnt work, Try flashing CM7 Rom or someother ROM.
Did you check http://forum.xda-developers.com/showthread.php?t=895545 ?
Odin should be your last resort, if nothing really works for you.
If you want to return to stock, simply flash the NAND backup found here: http://forum.xda-developers.com/showthread.php?t=884093 .
Disclaimer : I take no responsibility of what so ever happens to your phone, however you should be good if you follow proper steps.

Thanks so much for the quick reply. I think I've made some headway...I can "see" the device with cmd by typing adb devices. After that though, I don't understand how to get the stock nexus s rom on the phone. How do I move that file to my phone (what's the line of code I type)? I've tried "adb install <c:\grh78> but it says the syntax isn't correct. Any more help is so greatly appreciated and I appreciate the already prompt response. Thanks!!!

callison.168 said:
Thanks so much for the quick reply. I think I've made some headway...I can "see" the device with cmd by typing adb devices. After that though, I don't understand how to get the stock nexus s rom on the phone. How do I move that file to my phone (what's the line of code I type)? I've tried "adb install <c:\grh78> but it says the syntax isn't correct. Any more help is so greatly appreciated and I appreciate the already prompt response. Thanks!!!
Click to expand...
Click to collapse
Download your rom of choice (stock, custom)
Flash Cwm via fastboot if you haven't already
Boot into recovery.
Use adb push to push your zipped rom to the sdcard (adb push file.zip /sdcard/file.zip)
Use cwm to flash this zip.
Sent from my Nexus S using xda premium

callison.168 said:
Thanks so much for the quick reply. I think I've made some headway...I can "see" the device with cmd by typing adb devices. After that though, I don't understand how to get the stock nexus s rom on the phone. How do I move that file to my phone (what's the line of code I type)? I've tried "adb install <c:\grh78> but it says the syntax isn't correct. Any more help is so greatly appreciated and I appreciate the already prompt response. Thanks!!!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=9866675
http://forum.xda-developers.com/showthread.php?t=884093
These threads should be a complete solution to your issue.
Disclaimer : I take no responsibility of what so ever happens to your phone, however you should be good if you follow proper steps.

Wow fast responses. I bet it's annoying to help yet another person having issues (again, phone was given to me like this but yeah...) while you guys or gals already know how to do these things very well. Here's where I'm stuck. I enter this code in cmd:
fastboot flash recovery recovery-clockwork-5.0.2.0-crespo.img
and it just says < waiting for device >.
Here's a pic of the screen that I'm on with my phone when i enter the command.
http://imgur.com/Pey3W
If I'm just in the first screen by holding volume up and power, the computer won't read the phone. So I click recovery, the screen shows it's trying to install something then the triangle exclamation mark, i press volume up/down with power and get this screen and the computer can "see" my phone on cmd.
How do I get this flipping clockwork on this phone or get the stock image on my sd card? Thanks again for helping me out guys. I have taken a look at the links you have sent me and that's where i found the download as well as the code to enter. I will keep looking at them but if you find a faster solution, please let me know.

One more thing to be super clear on...when I'm on the screen on the Nexus S that says Fastboot Mode on top in red and Lock State - Unlocked...my computer won't read the phone, therefore I cannot fastboot the recovery img...

callison.168 said:
One more thing to be super clear on...when I'm on the screen on the Nexus S that says Fastboot Mode on top in red and Lock State - Unlocked...my computer won't read the phone, therefore I cannot fastboot the recovery img...
Click to expand...
Click to collapse
So you already tried "fastboot devices" while in fastboot mode?
Edit: Actually it sounds you really want stock so download the complete stock OTA ROM (including boot.img etc.), rename it to update.zip and put it on the root of your sdcard. Boot into the stock recovery like you did already and hit apply update.
EDIT: Go here to download the correct OTA http://forum.xda-developers.com/showthread.php?t=1056062
Find the correct 2.3.6 "Full ROM" for your phone model. Sounds like in those instructions you don't need to rename to update.zip. Haven't seen stock recovery for a while so I don't remember.
If there is a wipe option in the stock recovery then do that first.

Yes I have tried fastboot devices in fastboot mode but nothing because my computer doesn't read the phone in that mode. And yes, I want to put the stock rom on there but that's the key, I can't get access to the root of my sdcard. I can't push anything into the sdcard to flash it. Any ideas what to type or how to access the sdcard? Thanks a million, billion.

Also, I can't get the phone to boot at all, like I can't get passed the Google Logo if I reboot so I can't access the sdcard in the traditional way.

callison.168 said:
Yes I have tried fastboot devices in fastboot mode but nothing because my computer doesn't read the phone in that mode. And yes, I want to put the stock rom on there but that's the key, I can't get access to the root of my sdcard. I can't push anything into the sdcard to flash it. Any ideas what to type or how to access the sdcard? Thanks a million, billion.
Click to expand...
Click to collapse
Connect with adb and type this:
adb shell mount /sdcard
Then type:
adb push rom.zip /sdcard/update.zip

callison.168 said:
Yes I have tried fastboot devices in fastboot mode but nothing because my computer doesn't read the phone in that mode. And yes, I want to put the stock rom on there but that's the key, I can't get access to the root of my sdcard. I can't push anything into the sdcard to flash it. Any ideas what to type or how to access the sdcard? Thanks a million, billion.
Click to expand...
Click to collapse
If fastboot devices returns NOTHING then this is most likely a driver issue. Remove the device through device manager, make sure you have a recent SDK (for the USB driver) and let it re-detect.
callison.168 said:
Also, I can't get the phone to boot at all, like I can't turn on the phone so I can't access the sdcard in the traditional way.
Click to expand...
Click to collapse
If you can get into the boot loader and get a proper USB driver you should be able to flash a recovery.
Once you've flashed Clockwork Mod (recovery) you'll be able to push to the sdcard using ADB or possibly mount the sd card through the CWM menu (although I've yet to have that work).
In order to get a recovery flashed though you need to get fastboot to see your device (unless you can already boot into recovery, then just use ADB).

irishrally said:
Connect with adb and type this:
adb shell mount /sdcard
Then type:
adb push rom.zip /sdcard/update.zip
Click to expand...
Click to collapse
If he's stuck at the Google logo and has a trash boot.img it's not likely he'll be able to get a shell via ADB. Now, if the system is hanging starting a device or looping during boot then that's possible.

krohnjw said:
If he's stuck at the Google logo and has a trash boot.img it's not likely he'll be able to get a shell via ADB. Now, if the system is hanging starting a device or looping during boot then that's possible.
Click to expand...
Click to collapse
He said he can access stock recovery and has connected with adb, unless I read wrong.

irishrally said:
He said he can access stock recovery and has connected with adb, unless I read wrong.
Click to expand...
Click to collapse
Indeed - I saw no clockwork and figured he'd toasted his recovery image as well, but it does look like stock recovery is there. ADB should push fine to the sdcard from recovery then.

More...so if i type in adb reboot bootloader in the recovery screen, it does just that...great. But then my computer makes a noise, a double tap if you will...like a dun dun, like something didn't work. When you plug in something to the computer it usually goes like dun na...but the phone clearly won't read when I'm in bootloader/fastboot mode. So when I type a command, nothing will work...

callison.168 said:
More...so if i type in adb reboot bootloader in the recovery screen, it does just that...great. But then my computer makes a noise, a double tap if you will...like a dun dun, like something didn't work. When you plug in something to the computer it usually goes like dun na...but the phone clearly won't read when I'm in bootloader/fastboot mode. So when I type a command, nothing will work...
Click to expand...
Click to collapse
That noise is that it detects a device has been connected (assuming a recent version of windows). If you want to flash CWM you need to get the driver sorted for the device. No amount of plugging/unplugging is going to fix it.
If you have the stock recovery you can boot into the stock recovery, use adb to push the full OTA package to the sd card and then just flash that from the stock recovery.

callison.168 said:
More...so if i type in adb reboot bootloader in the recovery screen, it does just that...great. But then my computer makes a noise, a double tap if you will...like a dun dun, like something didn't work. When you plug in something to the computer it usually goes like dun na...but the phone clearly won't read when I'm in bootloader/fastboot mode. So when I type a command, nothing will work...
Click to expand...
Click to collapse
Go to the stock recovery like you have done before and type the adb command I wrote above.

Thanks is all I can say. Okay so when I type in the command, this is what I get:
- exec '/system/bin/sh' failed: No such file or directory (2) -
the "stock recovery" I can get into is the picture I posted a link for. That's what I can access as well as the fastboot mode when I first turn on the phone with volume up/power. But when my computer makes the noise that it's connected (using Windows 7 64bit) it makes a different sound then the normal "device connected." Like it's corrupted.

by the way...if we can get this working, I'll post a picture of me holding the fixed phone!

[Q] Fastboot broke my USB need Help

After trying to unlock my phone and flashing stock rom through CWM I accidently downloaded the rom for the at&t model. I own the sprint model. After flashing the incorrect boot img and radio img the fastboot just spat out errors so closed the CMD and booted up the phone. No longer does the USB work i have tried several computers none detecting it in either bootloader or within the android os. The android os doesnt even ask to mount it it just charges. Any help would really be aprreciated!

kambokid said:
After trying to unlock my phone and flashing stock rom through CWM I accidently downloaded the rom for the at&t model. I own the sprint model. After flashing the incorrect boot img and radio img the fastboot just spat out errors so closed the CMD and booted up the phone. No longer does the USB work i have tried several computers none detecting it in either bootloader or within the android os. The android os doesnt even ask to mount it it just charges. Any help would really be aprreciated!
Click to expand...
Click to collapse
OK firstly never close CMD when it is doing stuff that can cause damage to your PC, device etc. It can cause serious damage
I haven't tried this myself but you could try using a different USB connector. If that still doesn't recognise your device then it is a hardware problem or you have messed up you device.
If it works then download the sprint version and flash.
Hope this helped,
UselessSniper001

Wait what ?
So you wanted to unlock to flash stock ROM with cwm recovery but you used fastboot to flash boot radio etc .img's ?

UselessSniper001 said:
OK firstly never close CMD when it is doing stuff that can cause damage to your PC, device etc. It can cause serious damage
I haven't tried this myself but you could try using a different USB connector. If that still doesn't recognise your device then it is a hardware problem or you have messed up you device.
If it works then download the sprint version and flash.
Hope this helped,
UselessSniper001
Click to expand...
Click to collapse
Ive already tried several different USB cables. Thanks for the suggestion though.
albundy2010 said:
Wait what ?
So you wanted to unlock to flash stock ROM with cwm recovery but you used fastboot to flash boot radio etc .img's ?
Click to expand...
Click to collapse
It was a fastboot image.

Transfer a stockish ROM (can be deodexed & rooted, doesn't really matter) via WiFi and flash in CWM.

polobunny said:
Transfer a stockish ROM (can be deodexed & rooted, doesn't really matter) via WiFi and flash in CWM.
Click to expand...
Click to collapse
CWM Is no longer there after i restored it I was able to flash a stock ICS through normal recovery but the usb is still not working.

From a powered off state, if you hold VOL down and then press POWER, can you access download mode?
If yes, and you connect it to your computer (I'm going to assume you are using a windows computer), can you hear the device connected sound? It should get detected.

[Q] I dun messed up, bricked phone. Help please.

So I messed. Accidentally formatted my phone and now it's screwed. Tried to use fastboot to put boot.img on, but my computer won't recognize my phone when I do "fastboot devices" or any commands. It won't boot or anything. I dunno what to do, kinda need a phone. Any help would be greatly appreciated and rewarded duly.

Cynicsatire said:
So I messed. Accidentally formatted my phone and now it's screwed. Tried to use fastboot to put boot.img on, but my computer won't recognize my phone when I do "fastboot devices" or any commands. It won't boot or anything. I dunno what to do, kinda need a phone. Any help would be greatly appreciated and rewarded duly.
Click to expand...
Click to collapse
so no signs of life at all? can you get to the bootloader? how exactly did you format your phone?
the XDA brains trust is going to need a bit more info.

codeprimate said:
so no signs of life at all? can you get to the bootloader? how exactly did you format your phone?
the XDA brains trust is going to need a bit more info.
Click to expand...
Click to collapse
Sorry, there are signs of life. I can get to the bootloader and recovery. And I honestly clicked the wrong button, that's what happens when you don't sleep and decide to try to flash a new rom.

Are you sure you didn't flash a new Rom

Cynicsatire said:
Sorry, there are signs of life. I can get to the bootloader and recovery. And I honestly clicked the wrong button, that's what happens when you don't sleep and decide to try to flash a new rom.
Click to expand...
Click to collapse
If you can get to bootloader and recovery, you're not bricked. You just need to flash a new rom, this time remembering to flash the boot.img in fastboot like the instructions say.

Oops I thought he Saud there are no signs of life..Elvis spots all

iElvis said:
If you can get to bootloader and recovery, you're not bricked. You just need to flash a new rom, this time remembering to flash the boot.img in fastboot like the instructions say.
Click to expand...
Click to collapse
the problem is my computer isn't registering the device when i do fastboot.

Cynicsatire said:
the problem is my computer isn't registering the device when i do fastboot.
Click to expand...
Click to collapse
If 'fastboot devices' returns nothing, then you are most likely missing drivers. Easiest way to get drivers is install HTC Sync Manager. It will install the app and the drivers, you can safely uninstall the app later and still have the drivers stay installed
Sent from my One X

reboot to fastboot, but do not select bootloader (it should say "Fastboot" in red writing just underneath the green text and above the orange text.
connect it via usb to your pc, and it should say "fastboot usb", then you should be able to use fastboot commands. if it doen't allow you to use fastboot commands, try a different usb port, or reinstalling the drivers.

codeprimate said:
reboot to fastboot, but do not select bootloader (it should say "Fastboot" in red writing just underneath the green text and above the orange text.
connect it via usb to your pc, and it should say "fastboot usb", then you should be able to use fastboot commands. if it doen't allow you to use fastboot commands, try a different usb port, or reinstalling the drivers.
Click to expand...
Click to collapse
Did this, now it's stuck at the htc screen. Any suggestions?

Cynicsatire said:
Did this, now it's stuck at the htc screen. Any suggestions?
Click to expand...
Click to collapse
Hmmm, when it rebooted it stopped at the htc screen? This sounds like it's not going to the fastboot mode. Reboot with the volume held down. That should get to the fastboot mode.

codeprimate said:
Hmmm, when it rebooted it stopped at the htc screen? This sounds like it's not going to the fastboot mode. Reboot with the volume held down. That should get to the fastboot mode.
Click to expand...
Click to collapse
After I push the boot.img through fastboot, when I reboot it just sticks on the HTC boot screen. I can get to the fastboot screen but I already have the boot.img on there. What next? should it work?

Cynicsatire said:
After I push the boot.img through fastboot, when I reboot it just sticks on the HTC boot screen. I can get to the fastboot screen but I already have the boot.img on there. What next? should it work?
Click to expand...
Click to collapse
go to your recovery and flash the ROM (the boot.img is just the kernel) if you haven't done that.

codeprimate said:
go to your recovery and flash the ROM (the boot.img is just the kernel) if you haven't done that.
Click to expand...
Click to collapse
Oh. That makes sense. It works now. Thanks a million. I owe you one.

[Q] bad flash

Hi i have rooted and flashed the phone it got stuck on the htc screen so i tried factory reset bad idea now my phone will just go into the bootlader menu i can enable fastboot usb but it dont show up on computer but the computer makes a noise to say ive connected it i cant enable usb debugging because the phone wont come on i have tried to flash another boot img through fastboot with no luck im hoping its not bricked
please any help would be appreciated thanks

pl4yb0y78 said:
Hi i have rooted and flashed the phone it got stuck on the htc screen so i tried factory reset bad idea now my phone will just go into the bootlader menu i can enable fastboot usb but it dont show up on computer but the computer makes a noise to say ive connected it i cant enable usb debugging because the phone wont come on i have tried to flash another boot img through fastboot with no luck im hoping its not bricked
please any help would be appreciated thanks
Click to expand...
Click to collapse
Hmm. so you probably need to flash a recovery first.
then you will be able to use the recovery to mount usb and put a new rom on your "sd card"
Then you can flash the rom on your new recovery and don't forget to fastboot flash the boot.img.
edit: the all in one toolkit is great for things like this. It will put a new recovery on your phone with just a click of the button.
http://forum.xda-developers.com/showthread.php?t=1604677

tivofool said:
Hmm. so you probably need to flash a recovery first.
then you will be able to use the recovery to mount usb and put a new rom on your "sd card"
Then you can flash the rom on your new recovery and don't forget to fastboot flash the boot.img.
Click to expand...
Click to collapse
Thanks for the reply but i dont know how to do this ?
could you please explain it ?

pl4yb0y78 said:
Thanks for the reply but i dont know how to do this ?
could you please explain it ?
Click to expand...
Click to collapse
I just edited my original post. just in case you didn't know how. I guess I was a little slow.
Also I can't remember if a bootloader factory reset relocked your phone but you might want to check that too. up on top it would say locked or relocked. If it still says unlocked you don't have to do that step again. Like you did when you first rooted the phone.
(all in one tool kit is great for unlocking and relocking too) just put a copy of that bin file in all in one tool kit (data file i believe, but it says what to do in that thread)

tivofool said:
I just edited my original post. just in case you didn't know how. I guess I was a little slow.
Also I can't remember if a bootloader factory reset relocked your phone but you might want to check that too. up on top it would say locked or relocked. If it still says unlocked you don't have to do that step again. Like you did when you first rooted the phone.
(all in one tool kit is great for unlocking and relocking too) just put a copy of that bin file in all in one tool kit (data file i believe, but it says what to do in that thread)
Click to expand...
Click to collapse
hi i have got the tool kit run twrp s3 now i have a black htc logo screen on what next

pl4yb0y78 said:
hi i have got the tool kit run twrp s3 now i have a black htc logo screen on what next
Click to expand...
Click to collapse
Your phone is an s3?
My phone is an S4 as are I would guess the majority of users. I think the s3 is the international version. If you are on T mobile then it's a s4.
Ok,,,
so .... if your phone is an s3 version then you will have to check that the Rom you download is specific for your phone as most of the Roms on this site are for the s4 version.
you need to go to your recovery. press the volume down button and hold it. Then press the power button (don't hold it). That will get you to recovery.
when in twrp recovery you will see a mounts button. hit that then the next screen will have mount usb. then you will be able to move a rom you downloaded on your computer to your phone.
then you can install the rom zip in twrp.
then from your computer, I assume you know how to flash a boot.img
put a boot.img in your fastboot folder, open up a comand prompt.
fastboot flash boot boot.img
if you wanted a different recovery than you are using, find the download the recovery. *I would rename the recovery to recovery.img
fastboot flash recovery recovery.img
(I only mention a different recovery because in some of the Rom threads you might read that you can only install a particular rom with an older version of twrp.)
I'm not sure of your skill or experience with all of this. If you are very new to it (then you are probably really frustrated) have no fear there is a little bit to learn but not that much. Just keep reading the development thread and the guides in it.

tivofool said:
Your phone is an s3?
My phone is an S4 as are I would guess the majority of users. I think the s3 is the international version. If you are on T mobile then it's a s4.
Ok,,,
so .... if your phone is an s3 version then you will have to check that the Rom you download is specific for your phone as most of the Roms on this site are for the s4 version.
you need to go to your recovery. press the volume down button and hold it. Then press the power button (don't hold it). That will get you to recovery.
when in twrp recovery you will see a mounts button. hit that then the next screen will have mount usb. then you will be able to move a rom you downloaded on your computer to your phone.
then you can install the rom zip in twrp.
then from your computer, I assume you know how to flash a boot.img
put a boot.img in your fastboot folder, open up a comand prompt.
fastboot flash boot boot.img
if you wanted a different recovery than you are using, find the download the recovery. *I would rename the recovery to recovery.img
fastboot flash recovery recovery.img
(I only mention a different recovery because in some of the Rom threads you might read that you can only install a particular rom with an older version of twrp.)
I'm not sure of your skill or experience with all of this. If you are very new to it (then you are probably really frustrated) have no fear there is a little bit to learn but not that much. Just keep reading the development thread and the guides in it.
Click to expand...
Click to collapse
Thank you for the reply yes i am getting stressed at this and i am new had a break before i smashed the phone now ive just got to find out what my phone is s3 or s4 ? google will help

when i connect my phone to the computer in recovery or flashboot it does not let me see it so i can not put rom on the hdd
(tried restart phone no luck tried restart comy no luck, cant get it to show phone ) all drivers installed
can i use the tool kit to flash recovery ?
phone on orange uk ,is it a s4 ?
thanks for the help guys with your knowledge i will get it working i pray!

pl4yb0y78 said:
when i connect my phone to the computer in recovery or flashboot it does not let me see it so i can not put rom on the hdd
(tried restart phone no luck tried restart comy no luck, cant get it to show phone ) all drivers installed
can i use the tool kit to flash recovery ?
phone on orange uk ,is it a s4 ?
thanks for the help guys with your knowledge i will get it working i pray!
Click to expand...
Click to collapse
do you have your box the phone came in?
Z520e is S4
Z560e is S3
So were you able to put twrp on your phone? when you are in boot loader and click on the recovery does it take you to twrp? Yes the all in one toolkit will flash a recovery for you. but you have your boot loader unlocked first.

tivofool said:
do you have your box the phone came in?
Z520e is S4
Z560e is S3
So were you able to put twrp on your phone? when you are in boot loader and click on the recovery does it take you to twrp? Yes the all in one toolkit will flash a recovery for you. but you have your boot loader unlocked first.
Click to expand...
Click to collapse
yes i now have the twrp in recovery it says enter password and cancel i tried both it was the s4 one that worked so im guessing its an s4
what will the next step be? (if i need anything please could you leave a link)
thanks for all the help starting to feel i might win lol

in twrp when you press "mounts" then press "mount usb", does your computer finally see your phone?
I was looking at your first post, you say that you rooted and flashed your phone. What do you mean by that? Did you download a ROM and attempt to flash it? Or did you "fastboot flash boot boot.img"?
If you are able to access your phone via computer it is as simple as downloading a rom on your computer moving it to your phone then in twrp "install from zip". Then fastboot flash the boot.img.
http://forum.xda-developers.com/showthread.php?t=1583427
how to flash fastboot
http://forum.xda-developers.com/showthread.php?t=1752270
if you are just fed up and want your phone back to stock then you will need to run an RUU.
http://forum.xda-developers.com/showthread.php?t=2094414
To run a RUU you would need to relock your bootloader.
in console type "fastboot lock oem" or use your all in one toolkit to relock it.
if that fails you will need to put your stock recovery back. (you need to have boot loader unlocked to do this)
on the clockworkmod recovery page the stock recovery is the second download link.
http://www.modaco.com/topic/353006-...ch-recovery-for-the-htc-one-s-stock-download/

Ok i am now really confused nothing works downloaded recovery roms they wont install always says failed tried to adb sideload it after google it failed again tried 3 recovery roms all fail what is going wrong icant get it to work
so far ive put twrp on it pressed mount so i can put rom on phone worked
pressed install pressed zip failed
pressed adb sideload then start on comy sent rom 100% install failed
reeboot phone still no os
tried this 3 times different roms all failed
please help

pl4yb0y78 said:
Ok i am now really confused nothing works downloaded recovery roms they wont install always says failed tried to adb sideload it after google it failed again tried 3 recovery roms all fail what is going wrong icant get it to work
so far ive put twrp on it pressed mount so i can put rom on phone worked
pressed install pressed zip failed
pressed adb sideload then start on comy sent rom 100% install failed
reeboot phone still no os
tried this 3 times different roms all failed
please help
Click to expand...
Click to collapse
Do you know how to FASTBOOT FLASH boot.img which is present inside the ROM.ZIP?
Try wiping data, cache, dalvik. Then reinstall.
Sent from my Nexus 7 using Tapatalk HD

khan.orak said:
Do you know how to FASTBOOT FLASH boot.img which is present inside the ROM.ZIP?
Try wiping data, cache, dalvik. Then reinstall.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
thanks and yes i can do that i will try and get back to you

C:\adt-bundle-windows-x86_64-20130522\sdk\platform-tools>fastboot boot boot.img
creating boot image...
creating boot image - 16779264 bytes
downloading 'boot.img'...
OKAY [ 1.890s]
booting...
FAILED (remote: reproduce boot image with on-flash ramdisk error)
finished. total time: 1.926s
this is what i get when i try tried 3 imgs

pl4yb0y78 said:
C:\adt-bundle-windows-x86_64-20130522\sdk\platform-tools>fastboot boot boot.img
creating boot image...
creating boot image - 16779264 bytes
downloading 'boot.img'...
OKAY [ 1.890s]
booting...
FAILED (remote: reproduce boot image with on-flash ramdisk error)
finished. total time: 1.926s
this is what i get when i try tried 3 imgs
Click to expand...
Click to collapse
The command is:
Code:
fastboot flash boot boot.img

khan.orak said:
The command is:
Code:
fastboot flash boot boot.img
Click to expand...
Click to collapse
ok i try this i am only learning but getting there lol

[Q] Unlocked, reflashed, app ran into problem phone restarted and bricked?

Hi there,
Im still kinda a noob with android...
but i managed to unlock my htc sensation trough the steps @HTC,
changed the recovery, tried to flash a rom.
it failed due to my phone not being S-off. so i flashed it back :/
no problem there i thought just a rooted htc.
downloaded an app to remove bloat. and all seemed fine...
I was playing Clash of Clans, and it gave a message that the Google play services stopped and the phone rebooted.
when booted the lock screen was frozen, i pulled out the battery to find out my phone is unresponsive..
When i connect to windows 8, it cant recognize my phone at all
When i connect it to a charger i dont see the charging light.
and the worse thing is.. i cant get into the recovery.
any idea's what i can try?
i checked out the [unbrick] tread but i cant seem to figure out which "Package" i need and the links on the bottom of the page dont work when i click them
Thanks in advance
-Aline

At first you have not to be S-OFF in order to flash a rom.
Your rom will get installed just fine.You just need to flash the kernel of your rom manually through fastboot using the command fastboot flash boot boot.img.
What exactly do you mean by telling "so i flashed it back"?
Did you relocked your bootloader with fastboot oem lock and you flashed an RUU?
You said you are just rooted.If my theory was right you probably unlocked your bootloader again by flashing the unlock.bin and a cwm recovery and then you had to use a (Superuser , SuperSU zip).
The first time you unlocked your device was you using the same computer with windows 8?
If yes this is a problem.Check your device manager for unrecognised devices.Can you see the device?
Check this out.You can also check this.
(You can try with win7 or a linux destribution instead.)
Are you still able to boot into bootloader (hboot) using (Power)+(Vol-) Buttons?
If you have enabled usb-debugging and a working adb shell despite you are in a bootloop you can try:
Code:
adb shell
su ------>(If you don't see # instead of $)
reboot oem-78 -------> To get in RUU mode
or
reboot bootloader -------->(To reboot into hboot)
* reboot recovery could bring you to recovery *
If you can get into hboot or RUU mode give the command fastboot getvar all and copy-paste what it prints.

I know it was possible to flash with S-on,
thats what i tried and it failed (manually flashed the boot.img resulted in a bootloop)
so i flashed back to the "stock" rom.
resulting in a "normal" rooted device
since i've replaced my recovery and got root access
it never has been oem locked again.(still isnt)
i cant get into my bootloader/ruu mode. nor start up.
when i plug it into my computer (windows 8) it makes the sound as it does when you connect a device.
but in device manager it shows nothing, not even a yellow ! as it normally would if it can recognize a device.

aline1996 said:
I know it was possible to flash with S-on,
thats what i tried and it failed (manually flashed the boot.img resulted in a bootloop)
so i flashed back to the "stock" rom.
resulting in a "normal" rooted device
since i've replaced my recovery and got root access
it never has been oem locked again.(still isnt)
i cant get into my bootloader/ruu mode. nor start up.
when i plug it into my computer (windows 8) it makes the sound as it does when you connect a device.
but in device manager it shows nothing, not even a yellow ! as it normally would if it can recognize a device.
Click to expand...
Click to collapse
As you have not access to bootloader but your device is still seems to get connected i think you can only try HTC Unbricking Project.If the brickdetect.sh is not working you can try a different linux destribution.

Gatosbil said:
As you have not access to bootloader but your device is still seems to get connected i think you can only try HTC Unbricking Project.If the brickdetect.sh is not working you can try a different linux destribution.
Click to expand...
Click to collapse
Well, i just wonder which package i need, tried the links at the bottom of the post but those are no longer valid :/

aline1996 said:
Well, i just wonder which package i need, tried the links at the bottom of the post but those are no longer valid :/
Click to expand...
Click to collapse
Oups!I downloaded those packages some days before and I didn't see the links are broken now.
You can download them from the attachments here.
For Sensation and Sensation 4G

Gatosbil said:
Oups!I downloaded those packages some days before and I didn't see the links are broken now.
You can download them from the attachments here.
For Sensation and Sensation 4G
Click to expand...
Click to collapse
Well im afraid my phone is offically dead
this is what i get when i use ./brickdetect
[email protected]:/media/sdc$ ./brickdetect.sh
Searching for bricked device...
Device can't be detected. Check connections
[email protected]:/media/sdc$
please tell me i did something wrong xD
edit:
after some digging in knoppix i did find this:
http://imgur.com/DR7T4QK