Database Info

[Q] stuck in boot loop / pc not recognizing phone with adb

Hi,
I tried to install a ROM but it got stuck on the white screen with the HTC logo. I tried to do factory reset but it gets stuck again. I don't have clockwork recovery, and I rooted my phone using adb and ace recovery, which is not on my phone. I only temporarily used it to flash my rom, stupid I know. :-/ When I connect my phone to the PC it is not being recognized. I tried putting the PD98IMG.zip file on my sd card but it just says that it the image is incorrect. Is there anything I can do? Is this fixable?

brickdummy said:
Hi,
I tried to install a ROM but it got stuck on the white screen with the HTC logo. I tried to do factory reset but it gets stuck again. I don't have clockwork recovery, and I rooted my phone using adb and ace recovery, which is not on my phone. I only temporarily used it to flash my rom, stupid I know. :-/ When I connect my phone to the PC it is not being recognized. I tried putting the PD98IMG.zip file on my sd card but it just says that it the image is incorrect. Is there anything I can do? Is this fixable?
Click to expand...
Click to collapse
Flash a recovery.img from fastboot. What is an ace recovery? Read my signature for the HTC logo problem.

brickdummy said:
Hi,
I tried to install a ROM but it got stuck on the white screen with the HTC logo. I tried to do factory reset but it gets stuck again. I don't have clockwork recovery, and I rooted my phone using adb and ace recovery, which is not on my phone. I only temporarily used it to flash my rom, stupid I know. :-/ When I connect my phone to the PC it is not being recognized. I tried putting the PD98IMG.zip file on my sd card but it just says that it the image is incorrect. Is there anything I can do? Is this fixable?
Click to expand...
Click to collapse
I just went through some similar stuff. What type of computer are you using? PC/Mac? Are you using the original cable? What troubleshooting steps for connectivity have you done? Different cable? USB port?
Can you access the bootloader screen when you pull the battery and reboot while holding the volume button down and holding the power button? By accident, I found that the phone and PC will communicate with each other when "Fastboot" is selected on the bootloader screen (you should hear a connection chime and it should change to "Fastboot USB") except I could only get fastboot commands to work. The good news is that should be enough to flash a boot or whatever else you need to get back in business.

shadowboxx said:
I just went through some similar stuff. What type of computer are you using? PC/Mac? Are you using the original cable? What troubleshooting steps for connectivity have you done? Different cable? USB port?
Can you access the bootloader screen when you pull the battery and reboot while holding the volume button down and holding the power button? By accident, I found that the phone and PC will communicate with each other when "Fastboot" is selected on the bootloader screen (you should hear a connection chime and it should change to "Fastboot USB") except I could only get fastboot commands to work. The good news is that should be enough to flash a boot or whatever else you need to get back in business.
Click to expand...
Click to collapse
Hi, Thanks for the reply.I am using windows 7. I downloaded the drivers for HTC, and I am using a data cable and the USB port in the back of my computer, nearest the mother board. I do see "Fastboot USB" on the phone but when i type in the command prompt "adb devices" I get nothing.

brickdummy said:
Hi, Thanks for the reply.I am using windows 7. I downloaded the drivers for HTC, and I am using a data cable and the USB port in the back of my computer, nearest the mother board. I do see "Fastboot USB" on the phone but when i type in the command prompt "adb devices" I get nothing.
Click to expand...
Click to collapse
That's great you're getting the fastboot usb message! As long as you're not using a hub or some other usb extender, any functioning usb port on the pc will do. Again, I learned this by accident (ie the hard way) and found that in this mode, only fastboot commands will work, not adb. (on a side note, and others should correct me here, adb and fastboot work together when the phone is rebooted normally or in recovery but not in the bootloader screen)
Great test for connection: fastboot devices (if you get anything else except a serial # with fastboot after it, then close the cmd window, unplug, and pull battery/reboot to bootloader), fastboot reboot-bootloader. Once it reboots back into the bootloader screen, make sure you press the power button while fastboot is selected and you should again hear the chime and see fastboot usb come up. This is your phone saying it's ready to accept your fastboot commands.
Do let us know how it works.

bananagranola said:
Flash a recovery.img from fastboot. What is an ace recovery? Read my signature for the HTC logo problem.
Click to expand...
Click to collapse
Hi I actually saw your post earlier thank you. I will work on this. I found it in a tutorial when I rooted my phone with HTC dev, ace_recovery_ext_4.img. I'll post where i found it later.

bananagranola said:
Flash a recovery.img from fastboot. What is an ace recovery? Read my signature for the HTC logo problem.
Click to expand...
Click to collapse
when i flashboot the recovery.img file it goes to the red triangle.

brickdummy said:
Hi I actually saw your post earlier thank you. I will work on this. I found it in a tutorial when I rooted my phone with HTC dev, ace_recovery_ext_4.img. I'll post where i found it later.
Click to expand...
Click to collapse
Hi the program is actually called 4EXT Recovery Touch. I finally was able to open it through fastboot....Now all thats left is to find the right zip file to put my phone back to stock.

shadowboxx said:
That's great you're getting the fastboot usb message! As long as you're not using a hub or some other usb extender, any functioning usb port on the pc will do. Again, I learned this by accident (ie the hard way) and found that in this mode, only fastboot commands will work, not adb. (on a side note, and others should correct me here, adb and fastboot work together when the phone is rebooted normally or in recovery but not in the bootloader screen)
Great test for connection: fastboot devices (if you get anything else except a serial # with fastboot after it, then close the cmd window, unplug, and pull battery/reboot to bootloader), fastboot reboot-bootloader. Once it reboots back into the bootloader screen, make sure you press the power button while fastboot is selected and you should again hear the chime and see fastboot usb come up. This is your phone saying it's ready to accept your fastboot commands.
Do let us know how it works.
Click to expand...
Click to collapse
Hi, this did work, thank you. Would you happen to know how i can load the stock software on my phone? I had it rooted before im not sure if its still rooted. I also managed to get the 4ext recovery on my phone too.

shadowboxx said:
(on a side note, and others should correct me here, adb and fastboot work together when the phone is rebooted normally or in recovery but not in the bootloader screen)
Click to expand...
Click to collapse
As far as I know, fastboot only works when your phone is in fastboot mode. ADB works in recovery or system.
brickdummy said:
Hi, this did work, thank you. Would you happen to know how i can load the stock software on my phone? I had it rooted before im not sure if its still rooted. I also managed to get the 4ext recovery on my phone too.
Click to expand...
Click to collapse
Flash a rooted stock ROM from recovery. Whether you have root is in your system partition. Whether your bootloader is unlocked is in your bootloader. Whether you have a custom recovery is in your recovery partition. Three separate things.
As for your post in your other thread, read my signature.

bananagranola said:
As far as I know, fastboot only works when your phone is in fastboot mode. ADB works in recovery or system.
Flash a rooted stock ROM from recovery. Whether you have root is in your system partition. Whether your bootloader is unlocked is in your bootloader. Whether you have a custom recovery is in your recovery partition. Three separate things.
Click to expand...
Click to collapse
I'm sorry, I have no idea what I am doing. Can you show me the steps? When I try installing a stock rom zip file in my recovery from my sd card it aborts.

brickdummy said:
I'm sorry, I have no idea what I am doing. Can you show me the steps? When I try installing a stock rom zip file in my recovery from my sd card it aborts.
Click to expand...
Click to collapse
I'm guessing that you're trying to flash a PD98IMG.zip or a RUU. You need an actual stock rooted ROM, probably from here on the forum. Or just flash Android Revolution HD, an optimized rooted stock ROM, also from here on the forum in the development section. For more specific steps read the Ace Think Tank linked in my signature.

bananagranola said:
I'm guessing that you're trying to flash a PD98IMG.zip or a RUU. You need an actual stock rooted ROM, probably from here on the forum. Or just flash Android Revolution HD, an optimized rooted stock ROM, also from here on the forum in the development section. For more specific steps read the Ace Think Tank linked in my signature.
Click to expand...
Click to collapse
Ok, one more thing. I have S-ON. does that matter?
----
It did not, lol anyway it worked. Thank you everyone for you help. I really appreciate it.
-----
For those wondering I found the stock rooted rom here http://http://forum.xda-developers.com/showthread.php?t=996368
http://forum.xda-developers.com/showthread.php?p=26617631
Instructions to flash the rom
http://http://forum.xda-developers.com/showthread.php?t=2168500

brickdummy said:
Ok, one more thing. I have S-ON. does that matter?
Click to expand...
Click to collapse
Yes. You need to read the part in my signature about being stuck in the splash screen.

bananagranola said:
Yes. You need to read the part in my signature about being stuck in the splash screen.
Click to expand...
Click to collapse
ok, got it. Thank you again

Dear friends,
I have this problem: I got a brand new TCL S720 and the Google Play did not work, being a known rom issue. So, before doing anything, I've managed to make a backup of it's original rom with MTK Droid tools whichI supose it did it well. Then I've tried to install a CWM recovery to try a custom rom for it. The CWM recovery seemed to install succesfully but I didn't manage to install the new rom. If I remember well, it stucked on boot logo. Then tried to revert at it's original stock recovery, managed to have the phone back as it was in initial state, but doing more tries, It remained stucked on boot logo. The problem is that my computer doesn't recognise it anymore, when I connect it to USB it tries to install MTP usb driver but even before the driver was installed well, now it refuse to install, like the driver is not good or the proper driver doesn't exist. So the only thing I can do is to boot on stock recovery but even I tried to copy the original rom update.zip on external SD and to flash the phone using install update from sd card in recovery mode, It doesn't find the external sd card. So I'm stuck here, the computer doesn't detect the phone to try flashing it with SP flash tool or MTK Droid tool, and I also can't flash it from sd card. Have you any idea how to make it work again?
Thanks in advance.

Bricked my phone trying to update to 4.2! Help!

Hello, all. I've spent the last four hours trying update my AT&T HTC One X running Android 4.1.1 to 4.2.2 and I failed hard!
First, I used the all-in-one toolkit to unlock my bootloader, flash clockwork recovery, and root the phone. The first guide I was following gave me error status 7 when I tried to flash the ROM so I wen to this guide:
update-htc-one-x-cm101-android-422-jelly-bean-custom-firmware/2/ (from team android website)
I got to the step below using the SDK I downloaded from dev.android.com and now my phone is dead! The HTC logo appears and then it goes to a black screen. Luckily, I can still reach my fastboot and clockwork recovery menu but nothing I try makes the phone boot.
Step 8 - Type the following command and press Enter.
fastboot flash boot boot.img
Step 9 - Then, type the following command and press Enter.
fastboot reboot
I just want my phone back to normal please! I don't care about rooting anymore. Thank you.

zenkix said:
Hello, all. I've spent the last four hours trying update my AT&T HTC One X running Android 4.1.1 to 4.2.2 and I failed hard!
First, I used the all-in-one toolkit to unlock my bootloader, flash clockwork recovery, and root the phone. The first guide I was following gave me error status 7 when I tried to flash the ROM so I wen to this guide:
update-htc-one-x-cm101-android-422-jelly-bean-custom-firmware/2/ (from team android website)
I got to the step below using the SDK I downloaded from dev.android.com and now my phone is dead! The HTC logo appears and then it goes to a black screen. Luckily, I can still reach my fastboot and clockwork recovery menu but nothing I try makes the phone boot.
Step 8 - Type the following command and press Enter.
fastboot flash boot boot.img
Step 9 - Then, type the following command and press Enter.
fastboot reboot
I just want my phone back to normal please! I don't care about rooting anymore. Thank you.
Click to expand...
Click to collapse
Alright, the ROMs you've been trying to flash are for the quad core One X... please stay in this forum and you should be good to go!
Any ROMs and kernels from here http://forum.xda-developers.com/forumdisplay.php?f=1541 and here http://forum.xda-developers.com/forumdisplay.php?f=1726. Try to flash something from there and report back (you'll still need to flash boot.img

RollTribe said:
Alright, the ROMs you've been trying to flash are for the quad core One X... please stay in this forum and you should be good to go!
Any ROMs and kernels from here http://forum.xda-developers.com/forumdisplay.php?f=1541 and here http://forum.xda-developers.com/forumdisplay.php?f=1726. Try to flash something from there and report back (you'll still need to flash boot.img
Click to expand...
Click to collapse
Thank you very much for your help? Could you please point me to a ROM to flash? I looked through those links and have no idea which to pick/what to do. It doesn't even have to be 4.2...I just want a working phone again. Thanks again!

zenkix said:
Thank you very much for your help? Could you please point me to a ROM to flash? I looked through those links and have no idea which to pick/what to do. It doesn't even have to be 4.2...I just want a working phone again. Thanks again!
Click to expand...
Click to collapse
Well... What would you like? Completely stock? Sense with tweaks? 4.2 with minor tweaks? 4.2 with a ton of tweaks?

RollTribe said:
Well... What would you like? Completely stock? Sense with tweaks? 4.2 with minor tweaks? 4.2 with a ton of tweaks?
Click to expand...
Click to collapse
4.2 with minor tweaks sounds great! Although right now I kinda just want to the stock "boot.img" to verify that my phone is still usable and not totally bricked.

zenkix said:
4.2 with minor tweaks sounds great! Although right now I kinda just want to the stock "boot.img" to verify that my phone is still usable and not totally bricked.
Click to expand...
Click to collapse
Alright then CM10.1 http://forum.xda-developers.com/showthread.php?t=2064621 and AOKP http://forum.xda-developers.com/showthread.php?t=2064724 will both suit you. These have the different boot.img than stock, but just extract and fastboot flash boot boot.img and you should be good to go!

RollTribe said:
Alright then CM10.1 http://forum.xda-developers.com/showthread.php?t=2064621 and AOKP http://forum.xda-developers.com/showthread.php?t=2064724 will both suit you. These have the different boot.img than stock, but just extract and fastboot flash boot boot.img and you should be good to go!
Click to expand...
Click to collapse
Quick update...I flashed boot.img of the first link (CynogenMod) and my phone got passed the "HTC Quietly Brilliant" screen! But now it seems stuck on HTC One (Beats Audio at the bottom) screen. I'll give it a few minutes...
I'm really worried that I did major damage to my phone in the bootloader and clockwork recovery menus. I literally tried every single option there trying to get my phone to boot earlier.

Oh man...it seems stuck. Maybe I should just flash the completely stock boot.img file. If that works, I will factory reset my phone just to make sure everything is back to how it was before.

Dude it sounds like you're trying to flash a cm boot.img with a Sense ROM, that ain't gonna work. You can't just extract a boot.img and flash it with a different ROM.
You need to extract the boot.img from the ROM you're about to flash, then flash that ROM, then flash the boot.img you just extracted.
Sent from my Evita

timmaaa said:
Dude it sounds like you're trying to flash a cm boot.img with a Sense ROM, that ain't gonna work. You can't just extract a boot.img and flash it with a different ROM.
You need to extract the boot.img from the ROM you're about to flash, then flash that ROM, then flash the boot.img you just extracted.
Sent from my Evita
Click to expand...
Click to collapse
Thanks for your help man. If what you're saying is correct, does that mean my phone is hopeless? I deleted/wiped everything using the ClocworkMod Recovery menu. When I choose "install zip from sdcard" I get "E: Can't mount /sdcard/" and when I try to mount an sdcard I get "Error mounting /sdcard". I don't think I can flash any ROMs right now unless install zip from sideload is an option (I don't know how sideloading works).

Try using TWRP recovery instead, you'll find it here:
http://goo.im/devs/OpenRecovery/evita
Download it, check md5 is correct, then:
fastboot flash recovery filename.img
(Filename = exact TWRP recovery filename)
Then issue this command:
fastboot erase cache
Then:
fastboot reboot-bootloader
Now you should be able to select recovery on your phone screen and it should boot into TWRP. Next go to mount and mount usb storage. See if it comes up in Windows, it might need to be formatted from the sounds of it. If it doesn't show up as a usable drive, format it to fat32.
Once that's done you should be able to copy a ROM to your phone to flash. So copy it over, then extract the boot.img from the copy on your pc, then put the boot.img in your fastboot folder.
Do a full wipe in recovery (cache/dalvik/factory reset/system), then install the ROM, then reboot to bootloader, make sure phone is connected by usb, make sure fastboot usb comes up on your phone screen then issue the following command:
fastboot flash boot boot.img
Make sure it's the boot.img from the ROM you just flashed. Now once that's done you should be able to reboot into the ROM.
Sent from my Evita

timmaaa said:
Try using TWRP recovery instead, you'll find it here:
http://goo.im/devs/OpenRecovery/evita
Download it, check md5 is correct, then:
fastboot flash recovery filename.img
(Filename = exact TWRP recovery filename)
Then issue this command:
fastboot erase cache
Then:
fastboot reboot-bootloader
Now you should be able to select recovery on your phone screen and it should boot into TWRP. Next go to mount and mount usb storage. See if it comes up in Windows, it might need to be formatted from the sounds of it. If it doesn't show up as a usable drive, format it to fat32.
Once that's done you should be able to copy a ROM to your phone to flash. So copy it over, then extract the boot.img from the copy on your pc, then put the boot.img in your fastboot folder.
Do a full wipe in recovery (cache/dalvik/factory reset/system), then install the ROM, then reboot to bootloader, make sure phone is connected by usb, make sure fastboot usb comes up on your phone screen then issue the following command:
fastboot flash boot boot.img
Make sure it's the boot.img from the ROM you just flashed. Now once that's done you should be able to reboot into the ROM.
Sent from my Evita
Click to expand...
Click to collapse
This sounds like a good plan. I will give it a try tomorrow after work. Thank you guys for your help!

I couldn't sleep...so I followed your steps and my phone is now alive! Thank you!
I think now I need to flash GApps, right? I have this ---> gapps-jb-20130301-signed.zip
Any chance that's the wrong zip file? Do I need a special one for CM10.1?

That's the right gapps zip, it's the most recent one so yeah you're good to flash it.
And no problems, you're welcome
Sent from my Evita

[Q] Where has recovery gone?

no access to recovery
I've got big problem. My One Mini is fine until I try to go into recovery. It refuses to go there.
I get fastboot and bootloader menus fine. It enters bootloader, but if I try to go into recovery, it just goes back to the main bootloader menu.
The problem started when I flashed CWMRecovery. Fastboot and adb recognise my phone, and accept commands, but when I try to fastboot flash recovery in it sends an error message. File not found.
I tried " fastboot boot recovery.img" but that just froze the machine .
When I try to get into recovery from rom manager or ROM toolbox pro, it takes me to the fastboot menu, not into recovery, and we're back to square one, as above.
Running android 4.3 Sense 5.5 software 2.12.401.1 Supercid 11111111
rooted and unlocked
To get the phone to work again, I have to hold power down for about 10 secs direct from fastboot/bootloader...may have to do this several times before it boots into Android.
If I turn power off from bootloader, it returns to bootloader when I power up again.
If I don't turn the phone off, once in main application, it's all OK.
Ho hum.
As I say , it works like a dream until I want to go into recovery.
Any ideas, please?
Thanks

Hi
Boblud said:
I tried " fastboot boot recovery.img" but that just froze the machine .
Click to expand...
Click to collapse
The correct command to flash the recovery is
Code:
fastboot flash recovery your_recovery_image.img
see also: wiki.cyanogenmod.org/w/Doc:_fastboot_intro
Booting into recovery should be possible with
Code:
adb reboot recovery
I didnt tried CWM on the Mini, but used it on my old Marvel. I'm satisfied with TWRP for the Mini.
greetings

Yes, thanks. I know the commands should work...but that's the trouble..they don't!
I can get into the recovery menu...HBOOT /FASTBOOT / RECOVERY and so on, but selecting "RECOVERY" simply sends me back to HBOOT menu.
I can't flash anything under FASTBOOT, either. I've been doing this sort of thing for several years without trouble....until now!
So come on chaps..thinking caps on , please.

Boblud said:
Yes, thanks. I know the commands should work...but that's the trouble..they don't!
I can get into the recovery menu...HBOOT /FASTBOOT / RECOVERY and so on, but selecting "RECOVERY" simply sends me back to HBOOT menu.
I can't flash anything under FASTBOOT, either. I've been doing this sort of thing for several years without trouble....until now!
So come on chaps..thinking caps on , please.
Click to expand...
Click to collapse
lock the bootloader RUU back to stock and start over ?

clsA said:
lock the bootloader RUU back to stock and start over ?
Click to expand...
Click to collapse
Thanks, will do when I can find ruu to download! Any pointers, please?

Uhm.... have u read Frequently Asked Questions by @KidCarter93 ?
KidCarter93 said:
[SIZE=+1]Q11: I have a custom recovery installed but I can't boot into it.[/SIZE]
Use the command - fastboot erase cache.
You should now be able to boot into recovery.​
Click to expand...
Click to collapse
Maybe it helps.

Boblud said:
Thanks, will do when I can find ruu to download! Any pointers, please?
Click to expand...
Click to collapse
here's the RUU
http://www.androidruu.com/getdownlo...14_10.20.40.4408L_release_333483_signed_2.exe

clsA said:
here's the RUU
http://www.androidruu.com/getdownlo...14_10.20.40.4408L_release_333483_signed_2.exe
Click to expand...
Click to collapse
Thanks for help all round.
The RUU wouldn't run: it reported an unknown error, but having done so, it must have done something, as when I rebooted, I had access to recovery once again...briefly! Then it went again.
Anyway, I re locked / unlocked , locked a few times, and hey presto, it's sprung back into life!

Soft bricked shield tablet PLEASE HELP!

So I bought my shield tablet back in March, used it until about may I think. Was browsing the internet then it suddenly crashed and got stuck on the Nvidia boot screen. tried to reboot several times. Nothing. So I forgot about it and thought I would just google the reset option later when I had time. Now since June I have tried everything! From factory reset to fast boot and adb my pc won't even recognize my tablet. Also I never turned on usb dbugging cause I didn't even know what that was. I even gave it to the IT guys at work and they couldn't fix it. Now after reading everything there is to read on this problem and trying to fix it myself I'm stuck on the no command screen with the dead android robot. And now I hear there is a recall do to the battery, I can't even check what type I have. So if someone can please help me I would be much appreciative. Also this happened after updating to the latest OS.

okay so i was able to unlock the bootloader and start flashing but from fastboot flash recovery.img and beyond it says failed to write. any ideas of why?

Ace0169 said:
okay so i was able to unlock the bootloader and start flashing but from fastboot flash recovery.img and beyond it says failed to write. any ideas of why?
Click to expand...
Click to collapse
Can you flash twrp and boot to it?

Ace0169 said:
okay so i was able to unlock the bootloader and start flashing but from fastboot flash recovery.img and beyond it says failed to write. any ideas of why?
Click to expand...
Click to collapse
Hello,
Did you use "Fastboot flash recovery.img" as your command line??
I believe it is "Fastboot flash recovery recovery.img"
If you were able to unlock bootloader you're on the right track.
Sent from a Locked Bootloader

Yes I used "fastboot flash recovery recovery.img" but every command after that keeps telling me "failed to write file"

danjull said:
Can you flash twrp and boot to it?
Click to expand...
Click to collapse
I'm a complete noob when it comes to this stuff, what is twrp? Haha

Ace0169 said:
I'm a complete noob when it comes to this stuff, what is twrp? Haha
Click to expand...
Click to collapse
TWRP (Team Win Recovery Project) is a custom recovery that you can flash on your device. You can flash it like the stock recovery over fastboot. With TWRP you can make full system backups, installing roms or other stuff, wipe partitions and more. Keep trying to install the drivers on your pc. Try to use another usb slot or boot your pc into test mode to install the driver. If you can still access the bootloader, you have really good chances to rescue your device.

Okay will try that. Thanks man.

Ace0169 said:
Okay will try that. Thanks man.
Click to expand...
Click to collapse
I see what your doing wrong. You probably don't even have the recovery img to flash. That's why it's giving you a write error.
There is a tutorial in the general section, that should have all the files and links, etc etc that you'll need to flash TWRP/CWM recovery and root the device if you want
Here is the link:
http://forum.xda-developers.com/shi...k-recovery-images-ota-library-guides-t2988881
Sent from my Nexus 5

Mojar7070 said:
I see what your doing wrong. You probably don't even have the recovery img to flash. That's why it's giving you a write error.
There is a tutorial in the general section, that should have all the files and links, etc etc that you'll need to flash TWRP/CWM recovery and root the device if you want
Here is the link:
http://forum.xda-developers.com/shi...k-recovery-images-ota-library-guides-t2988881
Sent from my Nexus 5
Click to expand...
Click to collapse
If your referring to the recovery images from Nvidia website I have dowloaded that, also the correct drivers. Maybe there is something else I'm missing?

Ace0169 said:
If your referring to the recovery images from Nvidia website I have dowloaded that, also the correct drivers. Maybe there is something else I'm missing?
Click to expand...
Click to collapse
First off, let me ask, what is your end result for the tablet?? Are you trying to just go a Complete stock tablet or are you trying to do anything custom (ex. Custom rom, recovery etc etc)
I'm assuming that since you unlocked your Bootloader, your trying to do something custom.
Sent from a Locked Bootloader

Ace0169 said:
If your referring to the recovery images from Nvidia website I have dowloaded that, also the correct drivers. Maybe there is something else I'm missing?
Click to expand...
Click to collapse
Those official nVidia recovery images come with smaller .img files such as recovery.img, system.img, etc. You'll need to flash those one by one ("fastboot flash recovery recovery.img", then run "fastboot flash system system.img", etc. etc.) or you can just run the flashall script that I think is included in the nVidia images.
Otherwise, if you want to flash TWRP, you'll need to download the TWRP recovery (you can rename it to "twrp-recovery.zip"). Then you'll need to "fastboot flash twrp-recovery.zip" in order to flash the twrp recovery to your tablet.

Mojar7070 said:
First off, let me ask, what is your end result for the tablet?? Are you trying to just go a Complete stock tablet or are you trying to do anything custom (ex. Custom rom, recovery etc etc)
I'm assuming that since you unlocked your Bootloader, your trying to do something custom.
Sent from a Locked Bootloader
Click to expand...
Click to collapse
I want my tablet to boot again, it's completely unusable in its condition I've heard re flashing will fix it.

Ace0169 said:
I want my tablet to boot again, it's completely unusable in its condition I've heard re flashing will fix it.
Click to expand...
Click to collapse
OK. Then the link I gave earlier should help flash stock software onto your tablet.
However, that guide is only to go back to factory "state" Operating System wise. It may not help with hardware. Once your flash everything correctly but device still doesn't boot, its probably not software related.
Sent from my Nexus 5

Mojar7070 said:
OK. Then the link I gave earlier should help flash stock software onto your tablet.
However, that guide is only to go back to factory "state" Operating System wise. It may not help with hardware. Once your flash everything correctly but device still doesn't boot, its probably not software related.
Sent from my Nexus 5
Click to expand...
Click to collapse
so ive followed the steps in the link, and ive executed all the commands but when i get to fasboot flash system system.img it says write failed. also all the commands beyond that one. ive got to be missing something. i have the image from nvidia developer, all the drivers, and my fastboot recognizes my device. has anyone encountered this before?

Ace0169 said:
so ive followed the steps in the link, and ive executed all the commands but when i get to fasboot flash system system.img it says write failed. also all the commands beyond that one. ive got to be missing something. i have the image from nvidia developer, all the drivers, and my fastboot recognizes my device. has anyone encountered this before?
Click to expand...
Click to collapse
After you unlocked the device but before trying to flash anything else on the device, try putting the shield into Fastboot mode. At the bootloader, select fastboot using the volume buttons.

koop1955 said:
After you unlocked the device but before trying to flash anything else on the device, try putting the shield into Fastboot mode. At the bootloader, select fastboot using the volume buttons.
Click to expand...
Click to collapse
Select "fastboot protocol"? Is that correct?

Ace0169 said:
Select "fastboot protocol"? Is that correct?
Click to expand...
Click to collapse
So i selected "fastboot protocol" it blipped for a second then brought me back to the bootloader. tried flashing again and once i reached the fastboot flash system system.img it said write failed again. did it not engage the "fastboot protocol"?

Bringing you back to the bootloader was expected behavior. The "write fail" is a mystery to me. Sorry, that is all that I can offer.

koop1955 said:
Bringing you back to the bootloader was expected behavior. The "write fail" is a mystery to me. Sorry, that is all that I can offer.
Click to expand...
Click to collapse
@Ace0169 Same, not sure what else to tell you. Sorry sir.
Sent from a Locked Bootloader

Trying to flash TRWP Moto Z recovery - not working

Hey everyone, longtime lurker here finally going to try to get involved more since I just got a new Moto Z and I don't have much of a background with motorola hardware/software. I'm trying to flash recoveries through fastboot and I can't seem to get it working. I'm probably going to wait a while before I try again since there is not much support for the moto z yet. I am running MPL24.246-45 v6.0.1 XT1650-03, I have unlocked the bootloader through the instructions on the motorola website.
On the bootloader screen I can confirm it is now unlocked, but everytime I flash the TRWP recovery through fastboot I get the error message: "<bootloader> img not working or corrupt". I am trying to flash the most recent twrp recoveries for moto Z (twrp-3.0.2-0-griffin.img) but wasn't able to successfully flash it.
Coming from a samsung background, I might be skipping a step or doing something wrong. I am running the bell canadian firmware. Since I messed up my partitions on my last phone I want to be careful with this one, I mostly want to figure out why I am getting this error while trying to flash the recovery when
my bootloader is unlocked and when I check "adb devices" my moto is being read.
Thanks!!
szork

spacezork said:
Hey everyone, longtime lurker here finally going to try to get involved more since I just got a new Moto Z and I don't have much of a background with motorola hardware/software. I'm trying to flash recoveries through fastboot and I can't seem to get it working. I'm probably going to wait a while before I try again since there is not much support for the moto z yet. I am running MPL24.246-45 v6.0.1 XT1650-03, I have unlocked the bootloader through the instructions on the motorola website.
On the bootloader screen I can confirm it is now unlocked, but everytime I flash the TRWP recovery through fastboot I get the error message: "<bootloader> img not working or corrupt". I am trying to flash the most recent twrp recoveries for moto Z (twrp-3.0.2-0-griffin.img) but wasn't able to successfully flash it.
Coming from a samsung background, I might be skipping a step or doing something wrong. I am running the bell canadian firmware. Since I messed up my partitions on my last phone I want to be careful with this one, I mostly want to figure out why I am getting this error while trying to flash the recovery when
my bootloader is unlocked and when I check "adb devices" my moto is being read.
Thanks!!
szork
Click to expand...
Click to collapse
didn't try it yet, but did you try renaming it to recovery.img (if on windows be sure extenstions are shown so it is not actually recovery.img.img) and run (didn't see which command you are using:
Code:
fastboot flash recovery recovery.img
but search around forums about encryption thing and similar

the ljubich said:
didn't try it yet, but did you try renaming it to recovery.img (if on windows be sure extenstions are shown so it is not actually recovery.img.img) and run (didn't see which command you are using:
Code:
fastboot flash recovery recovery.img
but search around forums about encryption thing and similar
Click to expand...
Click to collapse
I've tried both with the original twrp name and extension as well as with renaming it to recovery.img, didn't seem to make a difference. If I am connection to the device itself does that mean that adb/sideload is installed properly? I mean I was able to unlocked the bootloader so I would assume so.
szork

spacezork said:
I've tried both with the original twrp name and extension as well as with renaming it to recovery.img, didn't seem to make a difference. If I am connection to the device itself does that mean that adb/sideload is installed properly? I mean I was able to unlocked the bootloader so I would assume so.
szork
Click to expand...
Click to collapse
i really don't know then.. if you successfully unlocked bootloader then fastboot should be ok. you can check in device manager. it should be bootloader iterface not adb interface there (you got me confused with mentioning adb so I am just writing to be sure).
also check if your device is shown when typing
Code:
fastboot devices
or try redownloading twrp.
otherwise I am out of ideas, sorry.

the ljubich said:
i really don't know then.. if you successfully unlocked bootloader then fastboot should be ok. you can check in device manager. it should be bootloader iterface not adb interface there (you got me confused with mentioning adb so I am just writing to be sure).
also check if your device is shown when typing
Code:
fastboot devices
or try redownloading twrp.
otherwise I am out of ideas, sorry.
Click to expand...
Click to collapse
Sorry for my confusion with adb/sideload - from what I understand I need both to be able to connect to my device (correct me if im wrong). In the bootloader menu I see "flashing_unlocked" which I believe confirms my bootloader being unlocked, but then at the top of the text right under the dead android guy I see "AP Fastboot Flash Mode (Secure)" could that be an issue?
I can retry downloading the recovery from the TWRP site, but I know I'm downloading the official one already, just can't put my finger on why I'm getting that error message if others are doing it successfully.
thanks for helping :good:

Do you have the Verizon model?

samwathegreat said:
Do you have the Verizon model?
Click to expand...
Click to collapse
I have the canadian BELL model XT1650-03

spacezork said:
I have the canadian BELL model XT1650-03
Click to expand...
Click to collapse
You're at the bootloader, it says Flashing Unlock so yes your bootloader is unlocked and you should be able to flash TWRP no problem.
Did you recently install this .45 firmware? Are you sure that TWRP wasnt actually flashed? I see lots of errors like this from the bootloader and its usually just rubbish.

The twrp does not show the actual memory value of my cell phone and does not let me paste ROM backup, from insufficient memory? how to support it?

I updated my phone to .45 when I bought the phone I believe 1-2 weeks ago, it's definitely NOT flashed as the flashing process runs for 0.2 seconds and fails. I can even boot in the stock recovery afterwards confirming that nothing flashed. I wish I knew what I was doing wrong? possibility of drivers not installed properly?
Before I try and flash recovery I check USB debugging, OEM is unlocked, don't verify ADB files and accept Unknown sources. Is there anything I'm missing?

What if fastboot boot twrpname.img
It's really weird anyway...

enetec said:
What if fastboot boot twrpname.img
It's really weird anyway...
Click to expand...
Click to collapse
I've been doing fastboot flash twrpname.img after opening cmd terminal with SHIFT-MOUSE2 in the designated folder. I have not tried that command specifically what's the difference between doing fastboot flash/boot as far as flashing a recovery.img
edit: I've read on different articles that people sometimes try and flash from the recovery menu? I understood it has to be while your are on the bootloader screen, could it be something to do with that? Or is it still a possibility the drivers may not be installed properly.

spacezork said:
I've been doing fastboot flash twrpname.img after opening cmd terminal with SHIFT-MOUSE2 in the designated folder. I have not tried that command specifically what's the difference between doing fastboot flash/boot as far as flashing a recovery.img
edit: I've read on different articles that people sometimes try and flash from the recovery menu? I understood it has to be while your are on the bootloader screen, could it be something to do with that? Or is it still a possibility the drivers may not be installed properly.
Click to expand...
Click to collapse
With fastboot boot you send recovery to your phone and ask it to boot on it without really flashing it...
It's useful e.g. to take a full stock backup including original recovery, to test a recovery prior to flash it or to use TWRP to root BUT remain on stock recovery...
Not on all phones it works, but on Moto Z should....
P.S.: you have to be on fastboot screen not on recovery when flashing...

enetec said:
With fastboot boot you send recovery to your phone and ask it to boot on it without really flashing it...
It's useful e.g. to take a full stock backup including original recovery, to test a recovery prior to flash it or to use TWRP to root BUT remain on stock recovery...
Not on all phones it works, but on Moto Z should....
P.S.: you have to be on fastboot screen not on recovery when flashing...
Click to expand...
Click to collapse
by fastboot screen you mean the bootloader menu right?
I've been accessing cmd from designated folder with .img file in it
- adb fastboot recovery
- fastboot flash recovery.img..
and I get the "img not working or corrupt" after it tries to flash it (lasts 0.2 seconds) and nothing is done.

spacezork said:
by fastboot screen you mean the bootloader menu right?
I've been accessing cmd from designated folder with .img file in it
- adb fastboot recovery
- fastboot flash recovery.img..
and I get the "img not working or corrupt" after it tries to flash it (lasts 0.2 seconds) and nothing is done.
Click to expand...
Click to collapse
Right, bootloader screen. Enter on it by key-comb... not by command...
Even the real flash take same time... Sending seems to work, is something on verify that doesn't "like" it...
Try to download again recovery and/or check its MD5...

if reading correctly (and what I told you yesterday) command is
fastboot flash recovery recovery.img
and not
fastboot flash recovery.img

hi can any one help me i need to get back to stock and lock boot loader to update i have eu any one please ???????????

Troll amiga said:
hi can any one help me i need to get back to stock and lock boot loader to update i have eu any one please ???????????
Click to expand...
Click to collapse
try following this instructions: http://forum.xda-developers.com/showpost.php?p=69065373&postcount=14
and download eu rom from here: https://mirrors.lolinet.com/firmware/moto/griffin/official/RETEU/
i don't know from which ROM you are coming, don't know if downgrading works, but this was onl RETEU ROM i could find.

I have the exact same phone and I've upgraded to Nougat but I got my TWRP working. You need an unlocked bootloader and after upgrading to nougat, the option "unlock OEM" need to be enabled again.
I've used this TWRP : https://dl.twrp.me/griffin/twrp-3.0.2-0-griffin.img.html
Also I tried to only boot on it at first with the command fastboot boot twrp.img then I saw it was working, I flashed it with fastboot flash recovery twrp.img but got the error : (bootloader) image not signed or corrupt . But I booted the recovery from the bootloader and TWRP was working even with this error.

cilk said:
...I flashed it with fastboot flash recovery twrp.img but got the error : (bootloader) image not signed or corrupt . But I booted the recovery from the bootloader and TWRP was working even with this error.
Click to expand...
Click to collapse
Yeessss... I don't know how could I forgot it!!! :silly:
The message (I forgot I received too...) is *only* to indicate that recovery is not signed! But before there is a clear "Done" confirming the flash!
Just boot on it!