I have an XE, HBOOT 1.27 Unlocked and S-ON and I flashed many ROMs, always enabling SmartFlash in 4Ext.
Yesterday I tried to flash Sebastian's ROM, Revelation, and now my phone is stuck at HTC Splash Screen.
First I did a nandroid to my current ROM, Pac 1.1, then format all(except SD Card), then flashed Revelation and something went wrong.
After flash complete I confirmed reboot and right before 4Ext closed, it showed a message saying something like : It has been detected a change in your boot partition, a backup of previous has been made in /sdcard/4Ext/boot.
It stays like that for a few seconds(I always had this message when flashed other ROMs) and soon after says something "there has been an error, report it" (never seen this message before) and reboots, but keeps showing Splash Screen for ~5 seconds, turns black, then Splash Screen again and so on until I remove the battery.
What can I do and how?
Someone told me to push via fastboot the ROM's boot.img but there is a problem.I have a PC where the phone has never been connected via USB cable, so I have no driver/tool anything.
When I connect it to PC, nothing shows up.
If I select FASTBOOT from the bootloader menu, still nothing shows up on PC.I tried from 4Ext menu Toggle usb connection, but still no trace on my PC.
I beg you, help me.
EDIT : I just found out that Sebastian messed up something in the installer, and all I have to do is to flash the boot.img through fastboot.
doublin said:
I have an XE, HBOOT 1.27 Unlocked and S-ON and I flashed many ROMs, always enabling SmartFlash in 4Ext.
Yesterday I tried to flash Sebastian's ROM, Revelation, and now my phone is stuck at HTC Splash Screen.
First I did a nandroid to my current ROM, Pac 1.1, then format all(except SD Card), then flashed Revelation and something went wrong.
After flash complete I confirmed reboot and right before 4Ext closed, it showed a message saying something like : It has been detected a change in your boot partition, a backup of previous has been made in /sdcard/4Ext/boot.
It stays like that for a few seconds(I always had this message when flashed other ROMs) and soon after says something "there has been an error, report it" (never seen this message before) and reboots, but keeps showing Splash Screen for ~5 seconds, turns black, then Splash Screen again and so on until I remove the battery.
What can I do and how?
Someone told me to push via fastboot the ROM's boot.img but there is a problem.I have a PC where the phone has never been connected via USB cable, so I have no driver/tool anything.
When I connect it to PC, nothing shows up.
If I select FASTBOOT from the bootloader menu, still nothing shows up on PC.I tried from 4Ext menu Toggle usb connection, but still no trace on my PC.
I beg you, help me.
Click to expand...
Click to collapse
Hi,
Try flashing a STOCK ROM
Choose the XE in the second post.
Otherwise you will have to setup your PC to run a RUU,and return everything back to square one.
The weird thing is that even if I try to flash another ROM, stil the same problem.
I format all except SD card,wipe cache+dalvik, mount SD card into PC and delete folder 4Ext/boot_backup.
Go back to 4Ext, enable SmartFlash and flash CM 10.1 by Albino . Reboot, I get the message about my boot partition has been modified, but not the error too, and when it reboots, stuck at splash screen.
I'm desperate.
doublin said:
The weird thing is that even if I try to flash another ROM, stil the same problem.
I format all except SD card,wipe cache+dalvik, mount SD card into PC and delete folder 4Ext/boot_backup.
Go back to 4Ext, enable SmartFlash and flash CM 10.1 by Albino . Reboot, I get the message about my boot partition has been modified, but not the error too, and when it reboots, stuck at splash screen.
I'm desperate.
Click to expand...
Click to collapse
Hi,
It looks like your only option to reconfigure your boot partition ,is to run a RUU.
Look HERE
Do you know the version-main of your phone?
But first you will also need to setup your PC for ADB.
Look HERE
malybru said:
Hi,
It looks like your only option to reconfigure your boot partition ,is to run a RUU.
Look HERE
Do you know the version-main of your phone?
But first you will also need to setup your PC for ADB.
Look HERE
Click to expand...
Click to collapse
Ok thank you for your links.
I'll try to do it tomorrow `cause right now I can't keep my concentration, too late and had a long day.
malybru said:
Hi,
It looks like your only option to reconfigure your boot partition ,is to run a RUU.
Look HERE
Do you know the version-main of your phone?
But first you will also need to setup your PC for ADB.
Look HERE
Click to expand...
Click to collapse
actually if he setup the pc with adb and fastboot files he will be able to flash the boot.img manually
so why the ruu.exe?
rzr86 said:
actually if he setup the pc with adb and fastboot files he will be able to flash the boot.img manually
so why the ruu.exe?
Click to expand...
Click to collapse
I tried that yesterday with the help of a guy, but no success.
I installed all necessary drivers, adb and fastboot, but I can't get my phone discovered on my PC.
If the boot partition would be screwed, why it doesn't work when I try to flash other ROM? Like CM 10.1 or the XE Stock that I've been suggested a few posts above. Flashing this ROMs, shouldn't the boot partition be written with the ROM's files, and everything should turn back as normal?
doublin said:
I tried that yesterday with the help of a guy, but no success.
I installed all necessary drivers, adb and fastboot, but I can't get my phone discovered on my PC.
If the boot partition would be screwed, why it doesn't work when I try to flash other ROM? Like CM 10.1 or the XE Stock that I've been suggested a few posts above. Flashing this ROMs, shouldn't the boot partition be written with the ROM's files, and everything should turn back as normal?
Click to expand...
Click to collapse
It should rewrite the boot partition. Are you sure 4ext says "a pending update to..." and the process completes?
First boot after a new flash can take as long a 10mins. Wait it out.
Anyway if it diesnt work, try another wipe (all except sdcard) flash another rom, and if you're still stuck, use an ruu.
Happy to help.
Far_SighT said:
It should rewrite the boot partition. Are you sure 4ext says "a pending update to..." and the process completes?
First boot after a new flash can take as long a 10mins. Wait it out.
Anyway if it diesnt work, try another wipe (all except sdcard) flash another rom, and if you're still stuck, use an ruu.
Happy to help.
Click to expand...
Click to collapse
I'm very sure 4ext says "a pending update to..." but only it doesn't completes as usual, instead show an error saying that the process couldn't be completed and the boot partition was reverted back as it was,report the problem. This happens when trying to flash Revelation.
I flashed CM 10.1 and says only " a pending update to..." no error , reboots and keeps turning off and on the splash screen.
I flashed a stock XE ROM, happens same thing as in CM 10.1 case.
I tried restoring from nandroid , happens same as CM 10.1 and stock XE ROM.
I wiped and flashed so many times in the last 2 days that I didn't do in the whole year that I had the phone.
I can't use a RUU, as I'm stuck at getting the phone discovered by PC.As I said, I installed all necessary drivers found on a topic here, but still can't see the phone.I tried HTC Sync also, as that pack installs the drivers too, but still no luck.
My last hope is to try connecting the phone on an older PC that I put it in a box and thrown it in the garage.That PC has all drivers and set-up for the phone, but they are outdated for sure.
doublin said:
I'm very sure 4ext says "a pending update to..." but only it doesn't completes as usual, instead show an error saying that the process couldn't be completed and the boot partition was reverted back as it was,report the problem. This happens when trying to flash Revelation.
I flashed CM 10.1 and says only " a pending update to..." no error , reboots and keeps turning off and on the splash screen.
I flashed a stock XE ROM, happens same thing as in CM 10.1 case.
I tried restoring from nandroid , happens same as CM 10.1 and stock XE ROM.
I wiped and flashed so many times in the last 2 days that I didn't do in the whole year that I had the phone.
I can't use a RUU, as I'm stuck at getting the phone discovered by PC.As I said, I installed all necessary drivers found on a topic here, but still can't see the phone.I tried HTC Sync also, as that pack installs the drivers too, but still no luck.
My last hope is to try connecting the phone on an older PC that I put it in a box and thrown it in the garage.That PC has all drivers and set-up for the phone, but they are outdated for sure.
Click to expand...
Click to collapse
There you go. The reason your phone is in a bootloop is that the correct boot.img is not written.
And something is not right with your recovery. It could be a bad flash (I'm not sure).
I don't think you need to use an ruu. Just get on a pc that recognizes your device, and flash the correct boot.img.
I would advise that you flash the recovery.img again.
EDIT: Change usb port to 2.0. Try all usb ports on your computer. It is quite common that fastboot recognizes devices on some usb ports and not on others.
Alternatively read this, point 4. This will surely work if you can't get another pc
doublin said:
I'm very sure 4ext says "a pending update to..." but only it doesn't completes as usual, instead show an error saying that the process couldn't be completed and the boot partition was reverted back as it was,report the problem. This happens when trying to flash Revelation.
I flashed CM 10.1 and says only " a pending update to..." no error , reboots and keeps turning off and on the splash screen.
I flashed a stock XE ROM, happens same thing as in CM 10.1 case.
I tried restoring from nandroid , happens same as CM 10.1 and stock XE ROM.
I wiped and flashed so many times in the last 2 days that I didn't do in the whole year that I had the phone.
I can't use a RUU, as I'm stuck at getting the phone discovered by PC.As I said, I installed all necessary drivers found on a topic here, but still can't see the phone.I tried HTC Sync also, as that pack installs the drivers too, but still no luck.
My last hope is to try connecting the phone on an older PC that I put it in a box and thrown it in the garage.That PC has all drivers and set-up for the phone, but they are outdated for sure.
Click to expand...
Click to collapse
Hi,
If you need windows 7 & 8 drivers, look HERE
If it worked on your old computer,then,it will still work now.
Far_SighT said:
There you go. The reason your phone is in a bootloop is that the correct boot.img is not written.
And something is not right with your recovery. It could be a bad flash (I'm not sure).
I don't think you need to use an ruu. Just get on a pc that recognizes your device, and flash the correct boot.img.
I would advise that you flash the recovery.img again.
EDIT: Change usb port to 2.0. Try all usb ports on your computer. It is quite common that fastboot recognizes devices on some usb ports and not on others.
Alternatively read this, point 4. This will surely work if you can't get another pc
Click to expand...
Click to collapse
I think this is the key to my problem. I checked the link you gave me and I think I might get it done using that method.
Gonna give it a try as soon as I get some free time later today.
PS : I tried all 3 usb ports on PC, ofc.
Thank you, I will keep this topic update with results.
I'm having a hard time finding the right RUU for my phone, as I don't have access to fastboot, which would make my job a lot easier.
I found a list with providers and CIDs and I suppose mine is HTC-ITA HTC__405 , since I bought it in Italy and it was unbranded.
But i can't get software version, as it asks me to go to setting/About phone . I can't do that.
I think the right RUU is RUU_PYRAMID_LE_ICS_35_S_HTC_Europe_3.32.401.105_R2_Radio_11.69.3504.00U_11.22.3504, so now I'm downloading that and then move on step 4 on that tutorial.
Hope I just won't brick the phone.
doublin said:
I'm having a hard time finding the right RUU for my phone, as I don't have access to fastboot, which would make my job a lot easier.
I found a list with providers and CIDs and I suppose mine is HTC-ITA HTC__405 , since I bought it in Italy and it was unbranded.
But i can't get software version, as it asks me to go to setting/About phone . I can't do that.
I think the right RUU is RUU_PYRAMID_LE_ICS_35_S_HTC_Europe_3.32.401.105_R2_Radio_11.69.3504.00U_11.22.3504, so now I'm downloading that and then move on step 4 on that tutorial.
Hope I just won't brick the phone.
Click to expand...
Click to collapse
You can flash only one particluar ruu. Just make sure it's pyramid le(sensation xe). You will not be able to flash a wrong one, so no need to worry.
Far_SighT said:
You can flash only one particluar ruu. Just make sure it's pyramid le(sensation xe). You will not be able to flash a wrong one, so no need to worry.
Click to expand...
Click to collapse
Yea I'm downloading right now RUU_PYRAMID_LE_ICS_35_S_HTC_Europe_3.32.401.105_R2_Radio_11.69.3504.00U_11.22.3504
Says LE, so I should be fine.
Hi,
The RUU process will not work if the phone says "Unlocked"
You will need to relock the phone,according to the section 3 of the guide.
So,you will need a PC
did you check also if the bootloader screen says fastboot usb?
malybru said:
Hi,
The RUU process will not work if the phone says "Unlocked"
You will need to relock the phone,according to the section 3 of the guide.
So,you will need a PC
Click to expand...
Click to collapse
OOps, forgot that step (I flash ruu via ruu.exe)
malybru said:
Hi,
The RUU process will not work if the phone says "Unlocked"
You will need to relock the phone,according to the section 3 of the guide.
So,you will need a PC
Click to expand...
Click to collapse
But I'm gonna do the step 4 which says only to execute the RUU .exe but don't do anything, and in the temp folder on my pc I will find a file which then I'll have to move to the SD Card and flash straight from my recovery.
rzr86 said:
did you check also if the bootloader screen says fastboot usb?
Click to expand...
Click to collapse
When I vol down & power to get in bootloader I see :
FASTBOOT
RECOVERY
FACTORY RESET
SIM LOCK
IMAGE CRC
I don't know about fastboot usb...
Anyway, selecting FASTBOOT and connecting my phone to PC, nothing shows up, and running fastboot commands doesn't work, there's no link between pc and phone.
doublin said:
But I'm gonna do the step 4 which says only to execute the RUU .exe but don't do anything, and in the temp folder on my pc I will find a file which then I'll have to move to the SD Card and flash straight from my recovery.
When I vol down & power to get in bootloader I see :
FASTBOOT
RECOVERY
FACTORY RESET
SIM LOCK
IMAGE CRC
I don't know about fastboot usb...
Anyway, selecting FASTBOOT and connecting my phone to PC, nothing shows up, and running fastboot commands doesn't work, there's no link between pc and phone.
Click to expand...
Click to collapse
when you select fastboot does it say after that fastboot usb in bootloader screen?
actually have you enabled usb debugging mode from tettings?
Related
Hello, I have a T-Mobile HTC Sensation 4G, and I've ran into some problems recently. I'm a basic-intermediate user when it comes to Android, but I can't find a solution specifically for this. It started with a small problem but got worse and worse until I couldn't even boot correctly.
I started out installing a small custom battery mod, but that led to a few problems with the notification bar (not a big deal).
Then I tried to revert to the stock battery to fix the problem, format cache and dalvik cache in recovery, and reset. Then I was put into an infinite boot loop with the HTC splash, but going into cwm recovery was still possible.
Then, in recovery, I could not access my sd card for some reason, so I shut off, reinserted the sd card, and remounted it, then I reset again.
Now, it's impossible to boot to android at all, and I am completely stuck at HBOOT/FASTBOOT, and cannot access recovery OR perform a hard reset.
If I try to reinstall cwm recovery, I get a partition update fail as well...
I have full root, s-off, etc.
ROM- InsertCoin 3.3.1
Kernel- Stock
Hboot- 1.17.1011
Clockwork version- 5.0.0.8
Any suggestions? Am I bricked? I can give more details if needed.
I think you could take a official RUU and rename to the same as if you were trying to flash CWR pm58img or whatever it is.... Don't have my files with me. It should reformat to stock. Hope it helps.
Sent from my HTC Sensation XE with Beats Audio using xda premium
neoissuperman said:
I think you could take a official RUU and rename to the same as if you were trying to flash CWR pm58img or whatever it is.... Don't have my files with me. It should reformat to stock. Hope it helps.
Sent from my HTC Sensation XE with Beats Audio using xda premium
Click to expand...
Click to collapse
Alright, thanks, I'll try that soon and see if it works.
Update: Unfortunately, I don't think I can flash anything, it just comes up with a partition update fail...
Anyone else know what I could try? I also tried to flash the 1.45 RUU, but it can't continue past the search for the bootloader.
If u can get to fastboot have u tried manually flashing recovery.img ie
Fastboot flash recovery recovery.img
This should work if u can get into fastboot and allow u to then get back to a recovery and may save ya life lol
Sent from my mind control device
joshndroid said:
If u can get to fastboot have u tried manually flashing recovery.img ie
Fastboot flash recovery recovery.img
This should work if u can get into fastboot and allow u to then get back to a recovery and may save ya life lol
Sent from my mind control device
Click to expand...
Click to collapse
I just tried that, but I get this error in the terminal-
"writing 'recovery'... FAILED (remote: image update error)"
I tried adb devices, and it's not even recognized, even though my sensation says FASTBOOT USB...
have you tried re-installing the drivers...
http://forum.xda-developers.com/showthread.php?t=1161769
from here to see if the phone will re-mount the phone...
also have you tried adb remount... see if that works?
personally im running out of ideas
joshndroid said:
have you tried re-installing the drivers...
http://forum.xda-developers.com/showthread.php?t=1161769
from here to see if the phone will re-mount the phone...
also have you tried adb remount... see if that works?
personally im running out of ideas
Click to expand...
Click to collapse
Nope, still nothing, I even tried different sd cards and usb cables, with no difference...
So has my phone been reduced to a paperweight?
APmoss13 said:
I just tried that, but I get this error in the terminal-
"writing 'recovery'... FAILED (remote: image update error)"
I tried adb devices, and it's not even recognized, even though my sensation says FASTBOOT USB...
Click to expand...
Click to collapse
ummmm just a quick questions.... if you are on the fastboot screen and at the top it says fastboot usb have you tried running the ruu from there and are you scid? what carrier are you on? also in another post above this you said the bootloader doesnt get past the searching files, im wondering if you left the .zip that says pm58img on the root of your sd card. that could be the reason it doesnt get past that screen. just trying to get more info to see if we can get more help for you.
Divine flaw said:
ummmm just a quick questions.... if you are on the fastboot screen and at the top it says fastboot usb have you tried running the ruu from there and are you scid? what carrier are you on? also in another post above this you said the bootloader doesnt get past the searching files, im wondering if you left the .zip that says pm58img on the root of your sd card. that could be the reason it doesnt get past that screen. just trying to get more info to see if we can get more help for you.
Click to expand...
Click to collapse
Yes, I have tried to flash the 1.45 Pyramid RUU, but when the RUU tries to reset my phone into bootloader, it just resets right back into fastboot (the RUU command stays at "waiting for bootloader"). I am also super cid and my carrier is US T Mobile. I made sure not to leave the update package on my sd card, and I even tried the RUU without an sd card at all, but no difference.
APmoss13 said:
Yes, I have tried to flash the 1.45 Pyramid RUU, but when the RUU tries to reset my phone into bootloader, it just resets right back into fastboot (the RUU command stays at "waiting for bootloader"). I am also super cid and my carrier is US T Mobile. I made sure not to leave the update package on my sd card, and I even tried the RUU without an sd card at all, but no difference.
Click to expand...
Click to collapse
ok.... i was just askin cause did the exact same thing (well almost, i tried to change the notification icons which resulted in my notification bar completely gone) you did and got into that infinite boot loop. and couldnt boot into android. and couldnt figure it out. the only thing i did was just install the ruu while i was in the fastboot screen and it worked. i wasnt aware that there was a 1.45 ruu for tmous but i dont think that should matter since you are scid anyways. now im just wonderin if you tried any other ruu's besides that one. for me i flashed the 1.29 ruu for tmous and that got me up and running...... sorry i couldnt help
Hello,
I'm really hoping you can help me out, for I have got myself into a bit of a pickle.
I have been eagerly awaiting ICS, and downloaded mrT69's PG58IMG.zip ics.
Now my phone is stuck in a loop of booting, I'll hear the music start up and quietly brilliant screen and it just keeps repeating. I've tried a system recovery from the hboot menu no dice, I've tried recopying pg58img.zip and receive an error wrong CID or similar, I'm a total plonker for bothering and now i'm just desperate to simply get my phone back working.
Anyway help would be great,
The details I got from my phone are
HBOOT 1.27 000
10.14.9035 01 M
Jan 13 2012 17:33
* My phone is totally stock, this was the first thing I've attempted on it, and will be my last.
Please oh please help you're my only hope.
Cheers
What software version were you on before attempting all this? This is the most important thing to know before you try anything as it helps you find the RUU for you phone
Thanks for your reply,
Is there an easy way to find out what software?, I backed up my sdcard, if the info is stored, but it was the latest gingerbread I think, totally stock and the phone is a white sensation from asia, z710e I beleive, as you can tell I'm pretty hopeless with this stuff.
If you have done the flash please reboot to RECOVERY and WIPE the CACHE partition. After this reboot again to RECOVERY and you will see that everything is on ext4.
I'm working on a solution but I can't provide this at the moment to cover this problem during the flash process.
I would try this if you haven't already!!
shanman-2 said:
If you have done the flash please reboot to RECOVERY and WIPE the CACHE partition. After this reboot again to RECOVERY and you will see that everything is on ext4.
I'm working on a solution but I can't provide this at the moment to cover this problem during the flash process.
I would try this if you haven't already!!
Click to expand...
Click to collapse
When I select Recovery, I get the green circle arrow icon then a red triangle with exclamation mark, and nothing else.
*** I've now read up and now know that's normal, I've cleared the cache, same looping.
WatkinTench said:
Hello,
I'm really hoping you can help me out, for I have got myself into a bit of a pickle.
I have been eagerly awaiting ICS, and downloaded mrT69's PG58IMG.zip ics.
Now my phone is stuck in a loop of booting, I'll hear the music start up and quietly brilliant screen and it just keeps repeating. I've tried a system recovery from the hboot menu no dice, I've tried recopying pg58img.zip and receive an error wrong CID or similar, I'm a total plonker for bothering and now i'm just desperate to simply get my phone back working.
Anyway help would be great,
The details I got from my phone are
HBOOT 1.27 000
10.14.9035 01 M
Jan 13 2012 17:33
* My phone is totally stock, this was the first thing I've attempted on it, and will be my last.
Please oh please help you're my only hope.
Cheers
Click to expand...
Click to collapse
Repeating means rebooting ?
Your device was S-OFF?
It happened to me as well (or something like that) when installing a theme not suitable for GB, i am not going to tell you that i have the right solution but here what i did (and it worked!!) to recover my Sensation:
Look for and store in you sdcard:
- PG58IMG.zip (i add the file, it converts HBOOT version into 1.17.000)
- ROM Real_Stock_Experience (can give you dropbox link to download when you do not find it, it is 354MB)
Flash HBOOT 1.17.0000 from Recovery (when your device enters in HBOOT should ask you to appy update automaticly) and after that flash that ROM (it is a zip file), device shuold start normally, after that you can flash latest RUU.
Hope it helps.
Rgds,
francescrm said:
Repeating means rebooting ?
Your device was S-OFF?
It happened to me as well (or something like that) when installing a theme not suitable for GB, i am not going to tell you that i have the right solution but here what i did (and it worked!!) to recover my Sensation:
Look for and store in you sdcard:
- PG58IMG.zip (i add the file, it converts HBOOT version into 1.17.000)
- ROM Real_Stock_Experience (can give you dropbox link to download when you do not find it, it is 354MB)
Flash HBOOT 1.17.0000 from Recovery (when your device enters in HBOOT should ask you to appy update automaticly) and after that flash that ROM (it is a zip file), device shuold start normally, after that you can flash latest RUU.
Hope it helps.
Rgds,
Click to expand...
Click to collapse
thanks for replying,
I tried using the pg58img.zip you linked but I get the error
CID incorrect! Update fail! press Power to reboot.
WatkinTench said:
When I select Recovery, I get the green circle arrow icon then a red triangle with exclamation mark, and nothing else.
*** I've now read up and now know that's normal, I've cleared the cache, same looping.
Click to expand...
Click to collapse
wiggshome is having same problem on dev thread, keep an eye there as I have no other thoughts on your problem
WatkinTench said:
thanks for replying,
I tried using the pg58img.zip you linked but I get the error
CID incorrect! Update fail! press Power to reboot.
Click to expand...
Click to collapse
That is probably because you have got an Asian ROM, i can only suggest you to make your device SuperCid (11111111), that will allow you to flash it. Look in ROM forum to find out how, now i remember i also had to do it, done it with device in HBOOT and connected to PC via USB, you need to enter certain commands in DOS.
Rgds,
well, I've tried for the last hour or so to get it going, and no luck, I'm more than likely going to throw the phone into the wall, at least I'll have some satisfaction.
i've tried using adb and adb devices in cmd, but it won't find the device, It also was a major pain to get the drivers to work, it seems to have but it doesn't want to cooperate, also it's mentioned to enable usd debugging, how on earth do I do this when the phone won't even boot?, I'm really running out of patience with the damn thing,
I reliase a solution could be changing to superCID and installing that fix, but I can't even get the phone to be recognized in windows to change it?
so I'll try and provide more info, it's an Unbranded white sensation from Hong Kong, I simply want to get it back again, can I find a firmware that is for the cid and flash it to accept?,
I just don't know what to do now, certainly didn't think this would be my evening tonight, lesson learnt,
It only uses adb when the phone is booted, so that won't work
Go into HBOOT and let us know what it says above 1.27.0000
http://forum.xda-developers.com/showthread.php?t=1542555
Well I took a big punt and downloaded a ship rom i didn't know what ara meant but do now, my phone has turned a little middle eastern but I easily changed to english, which I remembered I had to do for my phone when I first purchased.
I made sure to get the same radio version, and have tested wifi and receiving calls, so as far as I can tell it functions again.
A very stressful evening,
but at least it's back and running,
appreciate everyones assistance
WatkinTench said:
I reliase a solution could be changing to superCID and installing that fix, but I can't even get the phone to be recognized in windows to change it?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1192300
IF it doesn't you can Manually put the phone in the bootloader/hboot mode
Did you follow Step 4 ?
Rgds,
WatkinTench said:
Well I took a big punt and downloaded a ship rom i didn't know what ara meant but do now, my phone has turned a little middle eastern but I easily changed to english, which I remembered I had to do for my phone when I first purchased.
I made sure to get the same radio version, and have tested wifi and receiving calls, so as far as I can tell it functions again.
A very stressful evening,
but at least it's back and running,
appreciate everyones assistance
Click to expand...
Click to collapse
Which one did you download?
RUU_Pyramid_HTC_ARA_1.45.415.5_Radio_10.56.9035.00U_10.14.9035.01_M_release_220005_signed
is the one I got, interesting enough, I tried the asian one afterwards and got a cannot update error, have tested phone and still works, so it didn't do anything but I must had some luck to download one that the phone liked.
Use 1.50.401.1 (latest unbranded EU RUU)
Fixing boot loop issue after "Incorrect CID" error
Thanks to "xl VipeR lx" for the SuperCID guide and Joaquinf's guide on How to flash ICS 3.32 firmware.
Okay. Here's a step-by-step guide to fixing this boot loop if you're in a confused state:
The issue is due to problems with your CID, which means we'll have to fix that. First, plug your SD card into the computer and delete the PG58IMG.zip file from your root, then put the SD card back into the phone and keep it turned off.
1) Download the ADB tool from http://forum.xda-developers.com/attachment.php?attachmentid=672540&stc=1&d=1312138079
2) Make a folder named "adb" on your C:\ drive, and unzip the file into this folder (the path should look like this: C:\adb)
3) Open command prompt and type: cd c:\adb (keep command prompt open)
4) Reboot the phone into fastboot and then connect it to your PC
(in a second, your fastboot screen should show "fastboot USB")
5) Enter the command "fastboot oem writecid 11111111" in command prompt
6) Enter the command "fastboot reboot-bootloader"
7) Enter the command "fastboot getvar cid" (make sure your CID is now 11111111)
8) Enter the command "fastboot reboot"
9) Turn off your phone, put the SD back in your PC and copy the v3.32 PG58IMG.zip back onto the root, then reinsert it into the phone.
10) Reboot back to fastboot and the firmware should now install without error.
11) Now you need to plug the SD back in the PC and delete the PG58IMG.zip from your root, then reinsert it into the phone again.
11) Finally, boot back into fastboot and you could now go on to Superwipe and then install your ICS ROM as you'd originally intended.
you have to install htc sync to use adb commands
Hi,
I tried to install a ROM but it got stuck on the white screen with the HTC logo. I tried to do factory reset but it gets stuck again. I don't have clockwork recovery, and I rooted my phone using adb and ace recovery, which is not on my phone. I only temporarily used it to flash my rom, stupid I know. :-/ When I connect my phone to the PC it is not being recognized. I tried putting the PD98IMG.zip file on my sd card but it just says that it the image is incorrect. Is there anything I can do? Is this fixable?
brickdummy said:
Hi,
I tried to install a ROM but it got stuck on the white screen with the HTC logo. I tried to do factory reset but it gets stuck again. I don't have clockwork recovery, and I rooted my phone using adb and ace recovery, which is not on my phone. I only temporarily used it to flash my rom, stupid I know. :-/ When I connect my phone to the PC it is not being recognized. I tried putting the PD98IMG.zip file on my sd card but it just says that it the image is incorrect. Is there anything I can do? Is this fixable?
Click to expand...
Click to collapse
Flash a recovery.img from fastboot. What is an ace recovery? Read my signature for the HTC logo problem.
brickdummy said:
Hi,
I tried to install a ROM but it got stuck on the white screen with the HTC logo. I tried to do factory reset but it gets stuck again. I don't have clockwork recovery, and I rooted my phone using adb and ace recovery, which is not on my phone. I only temporarily used it to flash my rom, stupid I know. :-/ When I connect my phone to the PC it is not being recognized. I tried putting the PD98IMG.zip file on my sd card but it just says that it the image is incorrect. Is there anything I can do? Is this fixable?
Click to expand...
Click to collapse
I just went through some similar stuff. What type of computer are you using? PC/Mac? Are you using the original cable? What troubleshooting steps for connectivity have you done? Different cable? USB port?
Can you access the bootloader screen when you pull the battery and reboot while holding the volume button down and holding the power button? By accident, I found that the phone and PC will communicate with each other when "Fastboot" is selected on the bootloader screen (you should hear a connection chime and it should change to "Fastboot USB") except I could only get fastboot commands to work. The good news is that should be enough to flash a boot or whatever else you need to get back in business.
shadowboxx said:
I just went through some similar stuff. What type of computer are you using? PC/Mac? Are you using the original cable? What troubleshooting steps for connectivity have you done? Different cable? USB port?
Can you access the bootloader screen when you pull the battery and reboot while holding the volume button down and holding the power button? By accident, I found that the phone and PC will communicate with each other when "Fastboot" is selected on the bootloader screen (you should hear a connection chime and it should change to "Fastboot USB") except I could only get fastboot commands to work. The good news is that should be enough to flash a boot or whatever else you need to get back in business.
Click to expand...
Click to collapse
Hi, Thanks for the reply.I am using windows 7. I downloaded the drivers for HTC, and I am using a data cable and the USB port in the back of my computer, nearest the mother board. I do see "Fastboot USB" on the phone but when i type in the command prompt "adb devices" I get nothing.
brickdummy said:
Hi, Thanks for the reply.I am using windows 7. I downloaded the drivers for HTC, and I am using a data cable and the USB port in the back of my computer, nearest the mother board. I do see "Fastboot USB" on the phone but when i type in the command prompt "adb devices" I get nothing.
Click to expand...
Click to collapse
That's great you're getting the fastboot usb message! As long as you're not using a hub or some other usb extender, any functioning usb port on the pc will do. Again, I learned this by accident (ie the hard way) and found that in this mode, only fastboot commands will work, not adb. (on a side note, and others should correct me here, adb and fastboot work together when the phone is rebooted normally or in recovery but not in the bootloader screen)
Great test for connection: fastboot devices (if you get anything else except a serial # with fastboot after it, then close the cmd window, unplug, and pull battery/reboot to bootloader), fastboot reboot-bootloader. Once it reboots back into the bootloader screen, make sure you press the power button while fastboot is selected and you should again hear the chime and see fastboot usb come up. This is your phone saying it's ready to accept your fastboot commands.
Do let us know how it works.
bananagranola said:
Flash a recovery.img from fastboot. What is an ace recovery? Read my signature for the HTC logo problem.
Click to expand...
Click to collapse
Hi I actually saw your post earlier thank you. I will work on this. I found it in a tutorial when I rooted my phone with HTC dev, ace_recovery_ext_4.img. I'll post where i found it later.
bananagranola said:
Flash a recovery.img from fastboot. What is an ace recovery? Read my signature for the HTC logo problem.
Click to expand...
Click to collapse
when i flashboot the recovery.img file it goes to the red triangle.
brickdummy said:
Hi I actually saw your post earlier thank you. I will work on this. I found it in a tutorial when I rooted my phone with HTC dev, ace_recovery_ext_4.img. I'll post where i found it later.
Click to expand...
Click to collapse
Hi the program is actually called 4EXT Recovery Touch. I finally was able to open it through fastboot....Now all thats left is to find the right zip file to put my phone back to stock.
shadowboxx said:
That's great you're getting the fastboot usb message! As long as you're not using a hub or some other usb extender, any functioning usb port on the pc will do. Again, I learned this by accident (ie the hard way) and found that in this mode, only fastboot commands will work, not adb. (on a side note, and others should correct me here, adb and fastboot work together when the phone is rebooted normally or in recovery but not in the bootloader screen)
Great test for connection: fastboot devices (if you get anything else except a serial # with fastboot after it, then close the cmd window, unplug, and pull battery/reboot to bootloader), fastboot reboot-bootloader. Once it reboots back into the bootloader screen, make sure you press the power button while fastboot is selected and you should again hear the chime and see fastboot usb come up. This is your phone saying it's ready to accept your fastboot commands.
Do let us know how it works.
Click to expand...
Click to collapse
Hi, this did work, thank you. Would you happen to know how i can load the stock software on my phone? I had it rooted before im not sure if its still rooted. I also managed to get the 4ext recovery on my phone too.
shadowboxx said:
(on a side note, and others should correct me here, adb and fastboot work together when the phone is rebooted normally or in recovery but not in the bootloader screen)
Click to expand...
Click to collapse
As far as I know, fastboot only works when your phone is in fastboot mode. ADB works in recovery or system.
brickdummy said:
Hi, this did work, thank you. Would you happen to know how i can load the stock software on my phone? I had it rooted before im not sure if its still rooted. I also managed to get the 4ext recovery on my phone too.
Click to expand...
Click to collapse
Flash a rooted stock ROM from recovery. Whether you have root is in your system partition. Whether your bootloader is unlocked is in your bootloader. Whether you have a custom recovery is in your recovery partition. Three separate things.
As for your post in your other thread, read my signature.
bananagranola said:
As far as I know, fastboot only works when your phone is in fastboot mode. ADB works in recovery or system.
Flash a rooted stock ROM from recovery. Whether you have root is in your system partition. Whether your bootloader is unlocked is in your bootloader. Whether you have a custom recovery is in your recovery partition. Three separate things.
Click to expand...
Click to collapse
I'm sorry, I have no idea what I am doing. Can you show me the steps? When I try installing a stock rom zip file in my recovery from my sd card it aborts.
brickdummy said:
I'm sorry, I have no idea what I am doing. Can you show me the steps? When I try installing a stock rom zip file in my recovery from my sd card it aborts.
Click to expand...
Click to collapse
I'm guessing that you're trying to flash a PD98IMG.zip or a RUU. You need an actual stock rooted ROM, probably from here on the forum. Or just flash Android Revolution HD, an optimized rooted stock ROM, also from here on the forum in the development section. For more specific steps read the Ace Think Tank linked in my signature.
bananagranola said:
I'm guessing that you're trying to flash a PD98IMG.zip or a RUU. You need an actual stock rooted ROM, probably from here on the forum. Or just flash Android Revolution HD, an optimized rooted stock ROM, also from here on the forum in the development section. For more specific steps read the Ace Think Tank linked in my signature.
Click to expand...
Click to collapse
Ok, one more thing. I have S-ON. does that matter?
----
It did not, lol anyway it worked. Thank you everyone for you help. I really appreciate it.
-----
For those wondering I found the stock rooted rom here http://http://forum.xda-developers.com/showthread.php?t=996368
http://forum.xda-developers.com/showthread.php?p=26617631
Instructions to flash the rom
http://http://forum.xda-developers.com/showthread.php?t=2168500
brickdummy said:
Ok, one more thing. I have S-ON. does that matter?
Click to expand...
Click to collapse
Yes. You need to read the part in my signature about being stuck in the splash screen.
bananagranola said:
Yes. You need to read the part in my signature about being stuck in the splash screen.
Click to expand...
Click to collapse
ok, got it. Thank you again
Dear friends,
I have this problem: I got a brand new TCL S720 and the Google Play did not work, being a known rom issue. So, before doing anything, I've managed to make a backup of it's original rom with MTK Droid tools whichI supose it did it well. Then I've tried to install a CWM recovery to try a custom rom for it. The CWM recovery seemed to install succesfully but I didn't manage to install the new rom. If I remember well, it stucked on boot logo. Then tried to revert at it's original stock recovery, managed to have the phone back as it was in initial state, but doing more tries, It remained stucked on boot logo. The problem is that my computer doesn't recognise it anymore, when I connect it to USB it tries to install MTP usb driver but even before the driver was installed well, now it refuse to install, like the driver is not good or the proper driver doesn't exist. So the only thing I can do is to boot on stock recovery but even I tried to copy the original rom update.zip on external SD and to flash the phone using install update from sd card in recovery mode, It doesn't find the external sd card. So I'm stuck here, the computer doesn't detect the phone to try flashing it with SP flash tool or MTK Droid tool, and I also can't flash it from sd card. Have you any idea how to make it work again?
Thanks in advance.
I tried to install the android revolution hd one 71.1 on my phone and it went out good so far into the installation but after the installation, i rebooted my phone and it went to a boot logo then went to the TWRP recovery mode. i tried deleting the cache and doing a reset but nothing is happening. please help me.
patrickgrantm said:
I tried to install the android revolution hd one 71.1 on my phone and it went out good so far into the installation but after the installation, i rebooted my phone and it went to a boot logo then went to the TWRP recovery mode. i tried deleting the cache and doing a reset but nothing is happening. please help me.
Click to expand...
Click to collapse
Having the same problem. The phone only reboots into twrp recovery mode, yet shows no errors when re-flashing device with most recent version of sense ui.
I'd really like to be able to use my phone.
lurkeratthegate said:
Having the same problem. The phone only reboots into twrp recovery mode, yet shows no errors when re-flashing device with most recent version of sense ui.
I'd really like to be able to use my phone.
Click to expand...
Click to collapse
Flash latest stock RUU. Once phone is fixed you can go for a custom rom again
LS.xD said:
Flash latest stock RUU. Once phone is fixed you can go for a custom rom again
Click to expand...
Click to collapse
I tried that. My computer is no longer recognizing the device at all. I thought I was making progress through the first part of the day, but for some reason, usb recognition seems to fluctuate.
I'm normally pretty alright working with this type of thing, but this phone has me completely baffled.
lurkeratthegate said:
I tried that. My computer is no longer recognizing the device at all. I thought I was making progress through the first part of the day, but for some reason, usb recognition seems to fluctuate.
I'm normally pretty alright working with this type of thing, but this phone has me completely baffled.
Click to expand...
Click to collapse
Really weird. So you have no chance to get into fastboot mode, not even by selection reboot to bootloader in twrp?!
LS.xD said:
Really weird. So you have no chance to get into fastboot mode, not even by selection reboot to bootloader in twrp?!
Click to expand...
Click to collapse
I supposed I should have been more clear. Fastboot will work, but all of the adb commands fail as the "device not found". I have tried restarting everything multiple times, updated all of the drivers, deleted the drivers, re-installed them, and while it makes the chime noise when I plug the phone in, all I can do is look at it in device manager. I'm running windows 8.1 and twrp 2.8.5.0, by the way.
lurkeratthegate said:
I supposed I should have been more clear. Fastboot will work, but all of the adb commands fail as the "device not found". I have tried restarting everything multiple times, updated all of the drivers, deleted the drivers, re-installed them, and while it makes the chime noise when I plug the phone in, all I can do is look at it in device manager. I'm running windows 8.1 and twrp 2.8.5.0, by the way.
Click to expand...
Click to collapse
RUU flashing is fastboot based I suppose. So you won't need adb at all.
LS.xD said:
RUU flashing is fastboot based I suppose. So you won't need adb at all.
Click to expand...
Click to collapse
Wait, what? I can flash images like twrp to my phone via fastboot, but the only ruu's I've found either have executable wizard files, or are self extracting. How can I flash a rom or update utility using fastboot?
lurkeratthegate said:
Wait, what? I can flash images like twrp to my phone via fastboot, but the only ruu's I've found either have executable wizard files, or are self extracting. How can I flash a rom or update utility using fastboot?
Click to expand...
Click to collapse
Connect phone in fastboot mode, run RUU, click next plenty of times, and done
If your phone is S-ON, flash stock recovery first and relock the bootloader before running the RUU
Hi there,
Im still kinda a noob with android...
but i managed to unlock my htc sensation trough the steps @HTC,
changed the recovery, tried to flash a rom.
it failed due to my phone not being S-off. so i flashed it back :/
no problem there i thought just a rooted htc.
downloaded an app to remove bloat. and all seemed fine...
I was playing Clash of Clans, and it gave a message that the Google play services stopped and the phone rebooted.
when booted the lock screen was frozen, i pulled out the battery to find out my phone is unresponsive..
When i connect to windows 8, it cant recognize my phone at all
When i connect it to a charger i dont see the charging light.
and the worse thing is.. i cant get into the recovery.
any idea's what i can try?
i checked out the [unbrick] tread but i cant seem to figure out which "Package" i need and the links on the bottom of the page dont work when i click them
Thanks in advance
-Aline
At first you have not to be S-OFF in order to flash a rom.
Your rom will get installed just fine.You just need to flash the kernel of your rom manually through fastboot using the command fastboot flash boot boot.img.
What exactly do you mean by telling "so i flashed it back"?
Did you relocked your bootloader with fastboot oem lock and you flashed an RUU?
You said you are just rooted.If my theory was right you probably unlocked your bootloader again by flashing the unlock.bin and a cwm recovery and then you had to use a (Superuser , SuperSU zip).
The first time you unlocked your device was you using the same computer with windows 8?
If yes this is a problem.Check your device manager for unrecognised devices.Can you see the device?
Check this out.You can also check this.
(You can try with win7 or a linux destribution instead.)
Are you still able to boot into bootloader (hboot) using (Power)+(Vol-) Buttons?
If you have enabled usb-debugging and a working adb shell despite you are in a bootloop you can try:
Code:
adb shell
su ------>(If you don't see # instead of $)
reboot oem-78 -------> To get in RUU mode
or
reboot bootloader -------->(To reboot into hboot)
* reboot recovery could bring you to recovery *
If you can get into hboot or RUU mode give the command fastboot getvar all and copy-paste what it prints.
I know it was possible to flash with S-on,
thats what i tried and it failed (manually flashed the boot.img resulted in a bootloop)
so i flashed back to the "stock" rom.
resulting in a "normal" rooted device
since i've replaced my recovery and got root access
it never has been oem locked again.(still isnt)
i cant get into my bootloader/ruu mode. nor start up.
when i plug it into my computer (windows 8) it makes the sound as it does when you connect a device.
but in device manager it shows nothing, not even a yellow ! as it normally would if it can recognize a device.
aline1996 said:
I know it was possible to flash with S-on,
thats what i tried and it failed (manually flashed the boot.img resulted in a bootloop)
so i flashed back to the "stock" rom.
resulting in a "normal" rooted device
since i've replaced my recovery and got root access
it never has been oem locked again.(still isnt)
i cant get into my bootloader/ruu mode. nor start up.
when i plug it into my computer (windows 8) it makes the sound as it does when you connect a device.
but in device manager it shows nothing, not even a yellow ! as it normally would if it can recognize a device.
Click to expand...
Click to collapse
As you have not access to bootloader but your device is still seems to get connected i think you can only try HTC Unbricking Project.If the brickdetect.sh is not working you can try a different linux destribution.
Gatosbil said:
As you have not access to bootloader but your device is still seems to get connected i think you can only try HTC Unbricking Project.If the brickdetect.sh is not working you can try a different linux destribution.
Click to expand...
Click to collapse
Well, i just wonder which package i need, tried the links at the bottom of the post but those are no longer valid :/
aline1996 said:
Well, i just wonder which package i need, tried the links at the bottom of the post but those are no longer valid :/
Click to expand...
Click to collapse
Oups!I downloaded those packages some days before and I didn't see the links are broken now.
You can download them from the attachments here.
For Sensation and Sensation 4G
Gatosbil said:
Oups!I downloaded those packages some days before and I didn't see the links are broken now.
You can download them from the attachments here.
For Sensation and Sensation 4G
Click to expand...
Click to collapse
Well im afraid my phone is offically dead
this is what i get when i use ./brickdetect
[email protected]:/media/sdc$ ./brickdetect.sh
Searching for bricked device...
Device can't be detected. Check connections
[email protected]:/media/sdc$
please tell me i did something wrong xD
edit:
after some digging in knoppix i did find this:
http://imgur.com/DR7T4QK