Posting a Dev-Host link for this stock firmware if anyone still needs it.
i897uckk4 Odin One Click - Stock, CONTAINS Bootloaders, Re-partition, Full Wipe.zip
Related
I have been looking... I can't find the flashable Odin files.
I want to go back to Stock to the latest OTA 2.3.6 (UCLA3) // Where I can find the correct .TAR to flash it via Odin?
You can use the 2.3.5 then check for update... or I used the 2.3.6 nandroid backup posted in the Dec thread under stock firmware thread and found the stock recovery file and used Odin to flash it. Not sure where I got stock recovery but if you pm me I can give u link to my dropbox...
Sent from my SAMSUNG-SGH-I727 using Tapatalk
Here is Silver's LA3 stock tar you can flash via Odin: http://forum.xda-developers.com/showthread.php?t=1519648
There is a cwm-flashable rooted stock rom in the dev section somewhere too if you want to look for that...
skrambled said:
Here is Silver's LA3 stock tar you can flash via Odin: http://forum.xda-developers.com/showthread.php?t=1519648
There is a cwm-flashable rooted stock rom in the dev section somewhere too if you want to look for that...
Click to expand...
Click to collapse
I found this one. But the link its broken... There's no file.
Ah, sorry about that. In case you missed the reply in the dev section:
http://forum.xda-developers.com/showthread.php?t=1548750
I have a problem i upgrade my phone from froyo 2.2.1 to latest ver 2.3.6
it's from www
sammobile.com/firmware/?page=3&model=GT-I9003&pcode=EGY&os=1&type=1#firmware
by Kies , the problem is that the phone resat factory settings and start as new what should i do ?????????
you can just flash the rom through odin.
Google Odin 1.85 and look for the flashing guides in XDA.
Flash XXKPE+Pit first then flash firmware what you want
Sent from my GT-I9300 in my home
Read this recent thread with a similar issue. I posted detailed steps to go to 2.3.6 out there somewhere. See if that helps.
imboy25 said:
you can just flash the rom through odin.
Click to expand...
Click to collapse
it still restarting
Hi
This may be a repeated request. Just to wanted to get a confirm link which should have Tab2 GT-P3100 Stock Rom & Recovery and process to go back to stock.
Thanks.
Please refer here....
http://forum.xda-developers.com/showthread.php?p=38273172
If you need latest recovery from other locations pm me I will give ready link....
Hope I helped you...
adishakthi said:
Please refer here....
http://forum.xda-developers.com/showthread.php?p=38273172
If you need latest recovery from other locations pm me I will give ready link....
Hope I helped you...
Click to expand...
Click to collapse
I think this is what I needed. Just wanted to make sure I have everything when I brick my tablet and need to claim warranty. I hope the Baseband and Stock Recovery need ODIN installation and the installation steps for both are same.
I could not find out any tutorial here, how to use ODIN. If can somebody made one, bcoz there are peoples who wants to go back to stock ROM and this will help them.
Baseband
Version: P3100 DDCLK1
Android :4.1.1
Downliad link:
http://www.mediafire.com/?a8mv3tc8tx6xwkh
Stock recovery:
http://www.mediafire.com/download.php?bur55ysr1xl52vo
Firmware:
http://www.hotfile.com/dl/183584982/...1_INU.zip.html
BTW: I am presently with Adi's SungSonic HD Rom:good: and it is better than CM10.1 (My experience, no offense)
@ Adi
Can you please guide me step by step flashing Stock ROM using ODIN.
I googled and know little bit of ODIN flashing..Just need to select PDA and flash it once my phone detected by ODIN.
But I have 3 diff package here..
Recovery
Baseband
Firmware
How can I flash all of these by ODIN?
KSKHH said:
@ Adi
Can you please guide me step by step flashing Stock ROM using ODIN.
I googled and know little bit of ODIN flashing..Just need to select PDA and flash it once my phone detected by ODIN.
But I have 3 diff package here..
Recovery
Baseband
Firmware
How can I flash all of these by ODIN?
Click to expand...
Click to collapse
Firmware is an total package that contains all elements.......including bootloader. ...
Flash it via pc Odin pc Odin. ......
Before flashing whole firmware it is recommended to flash stock recovery and kernel via mobile Odin. ....
I have provided baseband and recover separately. ....
Because some people may need only baseband and they don't want to flash everything. .....
adishakthi said:
Firmware is an total package that contains all elements.......including bootloader. ...
Flash it via pc Odin pc Odin. ......
Before flashing whole firmware it is recommended to flash stock recovery and kernel via mobile Odin. ....
I have provided baseband and recover separately. ....
Because some people may need only baseband and they don't want to flash everything. .....
Click to expand...
Click to collapse
So if I download the Firmware then I will get stock recovery and Kernel as well...Am I right?
Can you please tell me file names for those?
So after flashing Stock Recovery & Kernel...I have to flash the firmware which will again flash Stock Recovery & Kernel..
Edit: I have flashed stock firmware.
I've looked everywhere and can't find an ODIN flashable TAR of the newest stock OTA, VRBMB1 with no wipe, can anyone help me out here? Please and Thank you!
fastfreddy7 said:
I've looked everywhere and can't find an ODIN flashable TAR of the newest stock OTA, VRBMB1 with no wipe, can anyone help me out here? Please and Thank you!
Click to expand...
Click to collapse
I don't think we have the tar file (use for Odin) yet because Samsung haven't release the full firmware yet. Once they posted the file, then our devs can create the full firmware tar file to be use with Odin with no wipe or full wipe.
buhohitr said:
I don't think we have the tar file (use for Odin) yet because Samsung haven't release the full firmware yet. Once they posted the file, then our devs can create the full firmware tar file to be use with Odin with no wipe or full wipe.
Click to expand...
Click to collapse
Well that would explain why I couldn't find it, haha. Thanks. Looks like the source was released, so hopefully I will have it soon.
Everything was fine. tried the minuit (or however you spell it) mod. Ended up in a boot loop. i can get into download mode fine. Downloaded the stock firmware to odin back and start over, but when i try, it checks the MD5 just fine. starts the "setupconnection" then i get a fail "can't open the serial(COM) port.
Am i doing something wrong here? Any help at all would be greatly appreciated!
What firmware version were you on before bootloop and what version are you trying to ODIN?
jlaholton said:
Everything was fine. tried the minuit (or however you spell it) mod. Ended up in a boot loop. i can get into download mode fine. Downloaded the stock firmware to odin back and start over, but when i try, it checks the MD5 just fine. starts the "setupconnection" then i get a fail "can't open the serial(COM) port.
Am i doing something wrong here? Any help at all would be greatly appreciated!
Click to expand...
Click to collapse
You need odin 3.10.6 and make sure you downloaded the latest stock firmware .tar. when flashing, don't move the phone, cord or laptop (if thats what you have).
Sent from my SM-G925P using XDA Free mobile app
Me too. The odin stuck at <ID:0/010> NAND Write Start!!
My stock ROM is OE2 and want to flash OF7, the original stock ROM has been rooted and TWRP installed.
lwang9 said:
Me too. The odin stuck at <ID:0/010> NAND Write Start!!
My stock ROM is OE2 and want to flash OF7, the original stock ROM has been rooted and TWRP installed.
Click to expand...
Click to collapse
Wipe system and try again
Soooperstar said:
Wipe system and try again
Click to expand...
Click to collapse
TWRP has been replaced to the original recovery firmware. It couldn't read the internal storage.
lwang9 said:
TWRP has been replaced to the original recovery firmware. It couldn't read the internal storage.
Click to expand...
Click to collapse
Are you able to factory reset from stock recovery?
Soooperstar said:
Are you able to factory reset from stock recovery?
Click to expand...
Click to collapse
I failed to use ODIN flash the entire stock ROM which is over 3gb tar.md5 file. Could I download the stock recovery only and flash by ODIN? Also, I am not sure if PIT file helps. I couldn't find PIT file download yet.
lwang9 said:
I failed to use ODIN flash the entire stock ROM which is over 3gb tar.md5 file. Could I download the stock recovery only and flash by ODIN? Also, I am not sure if PIT file helps. I couldn't find PIT file download yet.
Click to expand...
Click to collapse
Not completely understanding you. Are you saying Odin is failing when trying to Odin latest firmware?
Yes, I failed to flash the latest firmware by ODIN 3.10. I read another post mentioned PIT file to flash to avoid this issue. However, I don't know where I could download the PIT file for this phone.
lwang9 said:
Yes, I failed to flash the latest firmware by ODIN 3.10. I read another post mentioned PIT file to flash to avoid this issue. However, I don't know where I could download the PIT file for this phone.
Click to expand...
Click to collapse
Are you on the latest Odin version and are you using the correct firmware?
Yes, I did.
lwang9 said:
Yes, I did.
Click to expand...
Click to collapse
What Odin version are you using? What phone do you have, and what firmware version are you trying to use? What firmware are you on now?
Soooperstar said:
Are you on the latest Odin version and are you using the correct firmware?
Click to expand...
Click to collapse
My Odin version is 3.10 and the firmware I downloaded from Sammobile.
sammobile.com/firmwares/download/50549/G925PVPU2BOF7_G925PSPT2BOF7_SPR/
lwang9 said:
My Odin version is 3.10 and the firmware I downloaded from Sammobile.
sammobile.com/firmwares/download/50549/G925PVPU2BOF7_G925PSPT2BOF7_SPR/
Click to expand...
Click to collapse
And you have the sprint s6 edge? You didn't answer all my questions
used one of these when i had recent problem.
edit: try to use the same firmware your currently on (what i did) and the thing that worked for me was using an older sammy usb cable. Beleive it or not the original one kept failing on me. i had a thicker black one that was from my s4 maybe or note 2 i think and used that one and boom went thru. good luck
los82 said:
edit: try to use the same firmware your currently on (what i did) and the thing that worked for me was using an older sammy usb cable. Beleive it or not the original one kept failing on me. i had a thicker black one that was from my s4 maybe or note 2 i think and used that one and boom went thru. good luck
Click to expand...
Click to collapse
Thanks!!! It worked. Just grab another USB cable. The original one kept failing on me either. The issue has been solved. Thanks again.