I have a problem i upgrade my phone from froyo 2.2.1 to latest ver 2.3.6
it's from www
sammobile.com/firmware/?page=3&model=GT-I9003&pcode=EGY&os=1&type=1#firmware
by Kies , the problem is that the phone resat factory settings and start as new what should i do ?????????
you can just flash the rom through odin.
Google Odin 1.85 and look for the flashing guides in XDA.
Flash XXKPE+Pit first then flash firmware what you want
Sent from my GT-I9300 in my home
Read this recent thread with a similar issue. I posted detailed steps to go to 2.3.6 out there somewhere. See if that helps.
imboy25 said:
you can just flash the rom through odin.
Click to expand...
Click to collapse
it still restarting
Related
Hi,
I have a i9003 that ran on stock 2.2.1 ROM and I've been having serious SOD problems.
Updated to 2.3.5 ZHKPD last night using KIES. The update was successful but gave me screen blackouts during calls (screen and buttons turned all black whenever I start a call. I heard voice but was never able to turn on the screen again) in addition to SOD problems.
I have then downloaded Odin 1.83, and "I9003ZHKPD_I9003ZZHKP9_I9003XXKPM_HOME.tar" from here and tried to flash my phone again after reading a lot of guides on this forum.
I got a "Can't open the specified file" error from Odin (see attachment). Now when I turn on my phone all I see is a picture with a phone and a computer.
Was the re-partition cause of the problem?
Can someone here please let me know what I can do? To get 2.3.5 back into my phone?
Thanks in advance.
Did u flash XXKPE beefore flashing ???
If you have then try downloading the firmware from another source
I haven't - the "I9003ZHKPD_I9003ZZHKP9_I9003XXKPM_HOME.tar" file is the only one I tried to flash.
It's phone from Hong Kong and I do want to keep something from the stock firmware, such as the Chinese input.
What do you suggest I should do next?
flash it again from xxkpe with the step "re-partition"
Thanks. Did you mean I should first flash it with the "I9003XXKPE" file here?
Will I need the PIT file, and after XXKPE I'll have to flash ZHKPD right?
Well, the only question is: Can you come into download mode?
If you can, just flash KPE>KPD and everything solved.
If you can't get a jig or go to service center.
Thanks. Did you mean I should first flash it with the "I9003XXKPE" file here?
Will I need the PIT file, and after XXKPE I'll have to flash ZHKPD right?
dbowers said:
Thanks. Did you mean I should first flash it with the "I9003XXKPE" file here?
Will I need the PIT file, and after XXKPE I'll have to flash ZHKPD right?
Click to expand...
Click to collapse
Yes, XXKPE with pit, after that, ZCKPD WITHOUT pit
Use this guide for more help
http://forum.xda-developers.com/showthread.php?t=1133787
Sent from my GT-I9003 using XDA App
Thanks all for your help so far. I've now flashed it to XXKPE - going to flash ZHKPD now.
No prob
Sent from my GT-I9003 using XDA App
Hi all.. I helped out a friend to root and install MIUI on his i9003, i myself use a captivate.
These were the steps taken: odin to xxkpe, then odin to xxkp7 then cwm flash to MIUI.
He would like to go back to stock as MIUI is not bug-free and its affecting him. Anyways, i was searching the forum and found a few threads regarding this but I am still confused.
Going back to stock from MIUI/cm7/cm9 from my captivate is just to run odin-1-click and everything is done. Here im using odin v1.85 and wish to go back to I9003DXKP9, as this is the official firmware here.
So in order to go back to stock, i just flash the I9003DXKP9 using odin? Another concern is the I9003DXKP9 firmware has just 1 file :
Code:
I9003DXKP9_I9003OLBKP7_I9003DXKP7_HOME.tar.md5
and when i flashed XXKPE it had 5 files:
Code:
APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
GT-I9003-CSC-MULTI-OXAKPE.tar
latona_20110114.pit
MODEM_I9003XXKPE_REV_00_CL1041909.tar
I also read that if the firmware has only 1 file, just flash the pda and nothing else. So is it safe to assume that the process of going back to stock is just flashing the single firmware for DXKP9 or should i go back to XXKPE and then to DXKP9?? Any help would be greatly appreciated..
its better you first flash xxkpe then one file firmware, if u r reverting back from cm7/ miui/ cm9..
since sometimes phone gets into bootloop when just one file firmware is used to revert back to stock rom...
one file firmware is mainly used to upgrade from another stock firmware...
Hope i helped you..
suresh13 said:
I also read that if the firmware has only 1 file, just flash the pda and nothing else. So is it safe to assume that the process of going back to stock is just flashing the single firmware for DXKP9 or should i go back to XXKPE and then to DXKP9?? Any help would be greatly appreciated..
Click to expand...
Click to collapse
here is the guide for you.. http://forum.xda-developers.com/showthread.php?t=1133787
crk1995 said:
its better you first flash xxkpe then one file firmware, if u r reverting back from cm7/ miui/ cm9..
since sometimes phone gets into bootloop when just one file firmware is used to revert back to stock rom...
one file firmware is mainly used to upgrade from another stock firmware...
Hope i helped you..
Click to expand...
Click to collapse
Thanks, thats what i did just to be sure. Went back to xxkp3 and to dxkp9 rom. everything works fine now
On a side note, when i try to install cf-root for DXKP9, i get bootloop at sl9003 logo screen..
malungkot said:
here is the guide for you.. http://forum.xda-developers.com/showthread.php?t=1133787
Click to expand...
Click to collapse
Thanks, i already looked into that post, it does say all about upgrading but nothing about downgrading/installing the particular fw i want to go back to..
suresh13 said:
Thanks, thats what i did just to be sure. Went back to xxkp3 and to dxkp9 rom. everything works fine now
On a side note, when i try to install cf-root for DXKP9, i get bootloop at sl9003 logo screen..
Click to expand...
Click to collapse
check whether u r installing the right version of cf root...
install exactly the same version as ur fw has...
or go for universal cf root... its way more convenient...
note: i hope u meant xxkpe instead of xxkp3 ....
Hi Friends,
I don't know that i should open a new thread for it. But I have searched in XDA forums no one is ask about this CSC.
Now coming to the problem, I have taken the backup(contact, message) from Kies and rooted and installed the custom rom(Frankenstine and after ZSLE5 for NEO). After installing the custom rom I am unable to connect my phone using Kies, it shows, no sim card.
I have re-flashed it with Stock rom and able to connect it. Hope this issue is because of the CSC(which becomes unknown) after installation of custom Rom.
Anyone else faced this problem?
Thanks,
Karthik
karthik050782 said:
Hi Friends,
I don't know that i should open a new thread for it. But I have searched in XDA forums no one is ask about this CSC.
Now coming to the problem, I have taken the backup(contact, message) from Kies and rooted and installed the custom rom(Frankenstine and after ZSLE5 for NEO). After installing the custom rom I am unable to connect my phone using Kies, it shows, no sim card.
I have re-flashed it with Stock rom and able to connect it. Hope this issue is because of the CSC(which becomes unknown) after installation of custom Rom.
Anyone else faced this problem?
Thanks,
Karthik
Click to expand...
Click to collapse
after flashing any of the custom ROM, if it shows UNKNOWN CSC ..
then flash only cache.img of your stock ROM via ODIN
Thanks dude
Thanks dude! I will check it now. You are very fast in replying like your ROM
download and flash the TAR via ODIN
(dont worry. It doesnt affect binary counter)
http://www.mediafire.com/?79gdtd0pxadrffy
Hey bro, if you flash a custom rom.. You will not be able to use kies.. So i advice you to use a different app to backup your contacts etc and restore after flashing the custom rom..
Kies only works on stock roms..
Proud to own a Galaxy R
pankaj88 said:
download and flash the TAR via ODIN
(dont worry. It doesnt affect binary counter)
http://www.mediafire.com/?79gdtd0pxadrffy
Click to expand...
Click to collapse
Ok Dude that really helpful but Which Mode to select in ODIN to flash this? PDA?
maheepmaurya said:
Ok Dude that really helpful but Which Mode to select in ODIN to flash this? PDA?
Click to expand...
Click to collapse
yes.. buddy.. PDA
updated and working
Hi friends,
I have updated it with CSC option and it worked fine.. I am able to connect through Kies.. thank you pankaj...
Karthik
how to close this thread?
Hope we can close this thread? but how?
karthik050782 said:
Hope we can close this thread? but how?
Click to expand...
Click to collapse
Mod will do tht... we can't
Sent from 2.3.5
Hi
This may be a repeated request. Just to wanted to get a confirm link which should have Tab2 GT-P3100 Stock Rom & Recovery and process to go back to stock.
Thanks.
Please refer here....
http://forum.xda-developers.com/showthread.php?p=38273172
If you need latest recovery from other locations pm me I will give ready link....
Hope I helped you...
adishakthi said:
Please refer here....
http://forum.xda-developers.com/showthread.php?p=38273172
If you need latest recovery from other locations pm me I will give ready link....
Hope I helped you...
Click to expand...
Click to collapse
I think this is what I needed. Just wanted to make sure I have everything when I brick my tablet and need to claim warranty. I hope the Baseband and Stock Recovery need ODIN installation and the installation steps for both are same.
I could not find out any tutorial here, how to use ODIN. If can somebody made one, bcoz there are peoples who wants to go back to stock ROM and this will help them.
Baseband
Version: P3100 DDCLK1
Android :4.1.1
Downliad link:
http://www.mediafire.com/?a8mv3tc8tx6xwkh
Stock recovery:
http://www.mediafire.com/download.php?bur55ysr1xl52vo
Firmware:
http://www.hotfile.com/dl/183584982/...1_INU.zip.html
BTW: I am presently with Adi's SungSonic HD Rom:good: and it is better than CM10.1 (My experience, no offense)
@ Adi
Can you please guide me step by step flashing Stock ROM using ODIN.
I googled and know little bit of ODIN flashing..Just need to select PDA and flash it once my phone detected by ODIN.
But I have 3 diff package here..
Recovery
Baseband
Firmware
How can I flash all of these by ODIN?
KSKHH said:
@ Adi
Can you please guide me step by step flashing Stock ROM using ODIN.
I googled and know little bit of ODIN flashing..Just need to select PDA and flash it once my phone detected by ODIN.
But I have 3 diff package here..
Recovery
Baseband
Firmware
How can I flash all of these by ODIN?
Click to expand...
Click to collapse
Firmware is an total package that contains all elements.......including bootloader. ...
Flash it via pc Odin pc Odin. ......
Before flashing whole firmware it is recommended to flash stock recovery and kernel via mobile Odin. ....
I have provided baseband and recover separately. ....
Because some people may need only baseband and they don't want to flash everything. .....
adishakthi said:
Firmware is an total package that contains all elements.......including bootloader. ...
Flash it via pc Odin pc Odin. ......
Before flashing whole firmware it is recommended to flash stock recovery and kernel via mobile Odin. ....
I have provided baseband and recover separately. ....
Because some people may need only baseband and they don't want to flash everything. .....
Click to expand...
Click to collapse
So if I download the Firmware then I will get stock recovery and Kernel as well...Am I right?
Can you please tell me file names for those?
So after flashing Stock Recovery & Kernel...I have to flash the firmware which will again flash Stock Recovery & Kernel..
Edit: I have flashed stock firmware.
If got the update and 4.2.2 is terrible. So I would like to know how to downgrade back to 4.1.1. There probably is a way to do it through Odin (which would be preferred) and if there is, can you give me the links to the downloads.
bvm1228 said:
If got the update and 4.2.2 is terrible. So I would like to know how to downgrade back to 4.1.1. There probably is a way to do it through Odin (which would be preferred) and if there is, can you give me the links to the downloads.
Click to expand...
Click to collapse
Go to cyanogenmod. Is just the best rom till now. Stock rom is really sh*t. Samsung doesnt support us as they should do...!
Sent from my GT-P5110 using Tapatalk 4
No, I asked for Stock.
download 4.1.1 stock rom, and install using Odin. Pretty simple.
ddochi11 said:
download 4.1.1 stock rom, and install using Odin. Pretty simple.
Click to expand...
Click to collapse
can u please mention the exact procedure ? do we have to root the device before flashing ? or can we just flash a stock rom using a recovery like CWM recovery ?
bvm1228 said:
If got the update and 4.2.2 is terrible. So I would like to know how to downgrade back to 4.1.1. There probably is a way to do it through Odin (which would be preferred) and if there is, can you give me the links to the downloads.
Click to expand...
Click to collapse
Did you try a wipe data/cache in recovery mode? This should help a lot, after I did the new 4.2.2 is not so bad, is at least "good" ad the 4.1.2.
Samsung firmware
bvm1228 said:
If got the update and 4.2.2 is terrible. So I would like to know how to downgrade back to 4.1.1. There probably is a way to do it through Odin (which would be preferred) and if there is, can you give me the links to the downloads.
Click to expand...
Click to collapse
download Samsung firmware from this link
http://www.sammobile.com/firmwares/
choose your device n model,
all firmware in this site is original by Samsung
appsmarsterx said:
can u please mention the exact procedure ? do we have to root the device before flashing ? or can we just flash a stock rom using a recovery like CWM recovery ?
Click to expand...
Click to collapse
No root before flashing. But if you flash the stock rom via Odin, you will need to root it again.
If you can find a flashable zip, then yes, you can use a recovery.
But OP simply wants to return to stock 4.1.1. You can get back to complete stock setup with the Odin process.
Search online for exact procedures.