I got my Moto G mid-October 2015 but I opted for the version with 1GB RAM because of budget constraints. At first it performed pretty well even while doing a bit of multitasking, but now I'm just having problems; excessive lag during the animations and loading apps, slow multitasking, apps closing frequently in the background, battery drain and etc. How do I rectify this? I have tried limiting the number of apps allowed to be on in the background, using Greenify, factory resetting and even installing custom ROMs.
This is kinda putting a damper on things for me. Any help would be appreciated ;3
i'm actually amazed with the performance i can pull out of my device.. try a lightweight rom with flashhhh's kernel
Or try to flash the original Stock Firmware again via Fasboot.
Another thing what i have seen at my Sons Mobile is the SD-Card was slowing down the hole Mobile.
Just put for testing your Sd-Card out and try again. If its so, the just save your Data of your SD-Card, format it and put it back to your Mobile.
Hi... Same problem here... And i've tested the sdcard and the results were about 33 mb/sec for reads and 16mb/sec for writes... any rom to recommend? Maybe CM 13.1 ? I've tried CM 12.1 but it does the same... slow like hell even some times it completely freezes....Also with every restart it starts optimizing just one app... all the time... with stock 5.1.1 , with stock 6.0, with cm 12.1..... any help or advice?
PS: I just use (and need) facebook, fb messenger, fb pages and whatsapp.
Thanks in advance!
I'm using a Sandisk Ultra 32gb card since I started soak testing MM when it first came out and have every app that will go to it moved. I've never had a freeze or any slowdown. The only problem I've ever had is sometimes on a reboot the moved apps are greyed out until I restart Nova launcher. That seems to happen only with the beta Nova I'm running so it may be Nova.
Sent from my SM-T530NU using XDA-Developers mobile app
I'm on MM too... I'm trying using Nova right now... will see...
Mine is 16gb but started to have similar issues (slow loads, some freezes). The solution was to stock rom & kernel and added my SD Card as internal storage (I can't explain why did it help either).
MagusWRM said:
Mine is 16gb but started to have similar issues (slow loads, some freezes). The solution was to stock rom & kernel and added my SD Card as internal storage (I can't explain why did it help either).
Click to expand...
Click to collapse
Which one? v1.0 or 1.0a? And how did you do to stop the update service? It never stops asking for upgrade to MM... Or if I do the upgrade, it will replace the modified/optimized kernel, right?
jkiper said:
Which one? v1.0 or 1.0a? And how did you do to stop the update service? It never stops asking for upgrade to MM... Or if I do the upgrade, it will replace the modified/optimized kernel, right?
Click to expand...
Click to collapse
Mine is XT1543, using MM 6.0 (24.44.1). And no, the official auto-upgrade will not replace your kernel, you must flash the stock first or the MM Stock directly.
MagusWRM said:
Mine is XT1543, using MM 6.0 (24.44.1). And no, the official auto-upgrade will not replace your kernel, you must flash the stock first or the MM Stock directly.
Click to expand...
Click to collapse
Great, thanks, so v1.0 or 1.0a (or others of the link you posted) are stock roms, but with modified kernels? Great...thanks again
jkiper said:
Great, thanks, so v1.0 or 1.0a (or others of the link you posted) are stock roms, but with modified kernels? Great...thanks again
Click to expand...
Click to collapse
They are the stock of the stock (rom + kernel + user data + everything you modified except the unlocked status)
Don't forget to backup all your data
MagusWRM said:
They are the stock of the stock (rom + kernel + user data + everything you modified except the unlocked status)
Don't forget to backup all your data
Click to expand...
Click to collapse
Great.... did you update then to MM ? or any MM rom optimized like these ones?
jkiper said:
Great.... did you update then to MM ? or any MM rom optimized like these ones?
Click to expand...
Click to collapse
Upgraded to the official MM.
MagusWRM said:
Upgraded to the official MM.
Click to expand...
Click to collapse
How did you upgrade ? OTA? ... it seems to be disabled.... thanks again
jkiper said:
How did you upgrade ? OTA? ... it seems to be disabled.... thanks again
Click to expand...
Click to collapse
OTA will work if you are using official (from Motorola) releases.
Just flash the stock rom (some versions already has Android 6.0 available).
MagusWRM said:
OTA will work if you are using official (from Motorola) releases.
Just flash the stock rom (some versions already has Android 6.0 available).
Click to expand...
Click to collapse
Sorry... I dont get it... I flash the zip v1.0a (android 5.1.1) and then....? look for official 5.1.1 and flash it using fastboot? that would overwrite the first optimized one...
jkiper said:
Sorry... I dont get it... I flash the zip v1.0a (android 5.1.1) and then....? look for official 5.1.1 and flash it using fastboot? that would overwrite the first optimized one...
Click to expand...
Click to collapse
I do not use custom rom/kernel, I do use stock rom/kernel only (I did used custom kernel in the past, but my phone got slower)
Flash the stock rom to remove any customizations and get your device clean again.
when you said :
"Mine is 16gb but started to have similar issues (slow loads, some freezes). The solution was to stock rom & kernel and added my SD Card as internal storage (I can't explain why did it help either)."
I understood that you refer to the v1.0a , the .zip file in that link in "stock rom & kernel"..... Do you have the download link to the rom you are using?? Thanks
Related
hi
2 years withe my love GALAXY S1 (I9000)
rom every 3days ,alot of changes,life is running.
now ,i want some silent ,somthing to be stable and to install all my games and programes.
so i buy 7.7 , i am just asking LQ1 or LQ2 or CM9 or CM10 or any rom else which is
stable ,speed ,less problems.
i know this is the main question in fourms but
i will install it just once ,and will not change it .
main usage is web browsing and reading(smal font in HC is realy problem)
any advice plz
Paranoid Android! :good:
my suggestion... stock deodexed tweaked rom...
all cm10 based roms are crap tbh... very laggy and buggy for me... no real jelly bean effect.... the indian stock was the best for me...
in i9000
JB smooth,nice and better performance but some times i feel it need more hardware ,more function need more hardware .
LQ1 is good enough with everything working so if it isn't broke don't fix it as the brickbug is quite worrying after so many cases.
Im using Tweaked stock beta 5, tried CM bulids, but there are missing stuff, and. small bugs.
I suppose Zeta 4.0 shoulbe same as the one im using, no bugs , smoot efortless expereience
alryhaan said:
in i9000
JB smooth,nice and better performance but some times i feel it need more hardware ,more function need more hardware .
Click to expand...
Click to collapse
I just did the same move i9000 to P6800 on Friday. CM9 was great on my sgs but I had one of the original SGSs with the slow chips and JB was usable but slow.
i like cm9, nice and fast, no issues, and the experirience between my cm9 phone and cm9 tablet are the same
I load stock ICS then Zeta4.0 then Dedraks kernal to get rid of debug crap . I use latetest hk.
Yes, the Indian one's the best DDLP5
But I could not find the Deodexed one...(so as to apply the V6 Supercharger).
Does anyone have the Deoxded one of DDLP5 ? Many thanks
i've made my own deodexed on ddlp5... do you want the full version of bloatware remove one...
edan1979 said:
i've made my own deodexed on ddlp5... do you want the full version of bloatware remove one...
Click to expand...
Click to collapse
Cool, yes please!, I'd like to download it.
Sorry for bothering, but could you provide both full and no-bloatware ?
For no-bloatware one, which apps do you remove: readers hub, games hub, social hub?
What about the s-dock that shortcuts popup memo/calc, etc?
Is it possible to install back those removed apps if I want them again?
Many thanks
found the full stock deodexed at this thread...
http://forum.xda-developers.com/showthread.php?t=1819429
i'm currently uploading the slim version... what's being removed... mostly all samsung software, but i retain the mini apps... oh... update some of the apps to the latest like maps/gmail/youtube and some others... add up flash player as its been pull out from playstore... oh the menu bar also has been edit to show battery percentage... i think that's all...
edan1979 said:
found the full stock deodexed at this thread...
http://forum.xda-developers.com/showthread.php?t=1819429
i'm currently uploading the slim version... what's being removed... mostly all samsung software, but i retain the mini apps... oh... update some of the apps to the latest like maps/gmail/youtube and some others... add up flash player as its been pull out from playstore... oh the menu bar also has been edit to show battery percentage... i think that's all...
Click to expand...
Click to collapse
yes I tried that one, I couldn't get kai's one to work, ddlp5
I can't recall exactly, but it was either boot-loop, or I could not get the /system to have as rw..
The same rw mounting problem goes with the LQ2 dedoxed one in the dev thread...
http://www.mediafire.com/?i8234n1wp30ikd0
this the slim version of ddl5
edan1979 said:
http://www.mediafire.com/?i8234n1wp30ikd0
this the slim version of ddl5
Click to expand...
Click to collapse
thanks, will update soon, btw, have you got the supercharger all working with this rom?
update1: hm, i get a boot loop, after the GT6800 logo, I dont even see sammy logo.
the rom was originally from the official ddlp5, before fleshing yours, I wiped everything including /system, /data, /sdcard, /cache
update2: supernoob here, but I see that yours dont have boot.img inside the zip? do I have to have a correct boot.img?
thanks
you dont need to wipe... what included in the zip is a replacement deodexed /system/app and system/frameworks... others will still use the stock ddl5 files... supercharger script is also working fine.
btw what cwm did you use... i'm using cwm 6.0.1.1...
the way that i install it.
1. flash ddlp5 using odin
2. flash cwm 6.0.1.1
3. copy the files to sd card
4. flash it with cwm
that's all... it never fail before...
So
Ddlp5 looks to be the best untill now.
Can I ask why people return from JB to ICS ?
Sent from my GT-I9000 using xda premium
alryhaan said:
So
Ddlp5 looks to be the best untill now.
Can I ask why people return from JB to ICS ?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
I think the current JBs are all based on CMs, they are alright,.. but I personally think the official stocks are much better as far as the stability goes
(I'm kinda used to Samsung touchwiz and options, etc),
it's just that the official ones often have more bloats then needed (but again I might be wrong)
I've recently tried all JBs from Dev thread, i.e., JB v1.3, Nexness v2, paranoid v2.1, etc (all latest as of today)
But they all seemed to have some unknown or awkward errors, and not 'smooth'. and so not recommended for daily use (for me..)
Hoping for some the official JB release from samsung..
---------- Post added at 07:59 PM ---------- Previous post was at 07:45 PM ----------
edan1979 said:
you dont need to wipe... what included in the zip is a replacement deodexed /system/app and system/frameworks... others will still use the stock ddl5 files... supercharger script is also working fine.
btw what cwm did you use... i'm using cwm 6.0.1.1...
the way that i install it.
1. flash ddlp5 using odin
2. flash cwm 6.0.1.1
3. copy the files to sd card
4. flash it with cwm
that's all... it never fail before...
Click to expand...
Click to collapse
Right, It works good now, I'm now trying to apply SCv6, will update again, thanks
update: ok, scv6 applied, so far the best! thanks
Hi guys I'm new to this phone
it is actually Korean version Model: Nexus S M200k
android version 4.0.3 (ICS)
Build number IML74K
i need update my device to Official 4.1 (JB)
how can I do it? there are no update option in Settings
re:
asmOne said:
Hi guys I'm new to this phone
it is actually Korean version Model: Nexus S M200k
android version 4.0.3 (ICS)
Build number IML74K
i need update my device to Official 4.1 (JB)
how can I do it? there are no update option in Settings
Click to expand...
Click to collapse
I have the same model as yours..... Go to settings -> the very last tab (phone settings) => system updates => refresh......... w8 and a pop up will appear accept and you will be on 4.1.1 after a short 144mb download!
PS: I would recommend you to stay at ICS because 4.1.1 does not posses many features however it will eat ur ram like hell on average u would have 70-100mb free....... and games will lag a lot!
Like if this was helpful
Nexus_Lord said:
I have the same model as yours..... Go to settings -> the very last tab (phone settings) => system updates => refresh......... w8 and a pop up will appear accept and you will be on 4.1.1 after a short 144mb download!
PS: I would recommend you to stay at ICS because 4.1.1 does not posses many features however it will eat ur ram like hell on average u would have 70-100mb free....... and games will lag a lot!
Like if this was helpful
Click to expand...
Click to collapse
Thanks for responding Nexus_Lord.
that is the point there are NO UPDATE OPTION in my phone.
i attached screen snaps check it out.. :good:
asmOne said:
Thanks for responding Nexus_Lord.
that is the point there are NO UPDATE OPTION in my phone.
i attached screen snaps check it out.. :good:
Click to expand...
Click to collapse
It looks like you're using a custom ROM so the update option isn't showing up. You must be on stock ICS to take the OTA update to JB.
asmOne said:
Thanks for responding Nexus_Lord.
that is the point there are NO UPDATE OPTION in my phone.
i attached screen snaps check it out.. :good:
Click to expand...
Click to collapse
You are on AOKP ROM and not custom ROM.
You can install Stock OS using factory images
OR
Install custom ROMs like CyanogenMod, AOKP or SlimBean (Personal favorite).
You'll find the tutorials in the development thread.
smit.sanghavi said:
You are on AOKP ROM and not custom ROM.
You can install Stock OS using factory images
OR
Install custom ROMs like CyanogenMod, AOKP or SlimBean (Personal favorite).
You'll find the tutorials in the development thread.
Click to expand...
Click to collapse
Thanks for respondin smit.
I need to install a JB rom without any Bug what is your recommend for me?
asmOne said:
Thanks for respondin smit.
I need to install a JB rom without any Bug what is your recommend for me?
Click to expand...
Click to collapse
Even official android has some bugs. The closest to bug-free JB rom I used was Strawberry ROM coupled with matr1x kernel.
asmOne said:
Thanks for respondin smit.
I need to install a JB rom without any Bug what is your recommend for me?
Click to expand...
Click to collapse
There is no Custom ROM without any bugs. Even stock ROMs will have some bugs.
The reliable custom ROMs are CyanogenMod, AOKP, SlimBean etc etc
You can choose any of them and I'm sure you'll not be disappointed.
smit.sanghavi said:
There is no Custom ROM without any bugs. Even stock ROMs will have some bugs.
The reliable custom ROMs are CyanogenMod, AOKP, SlimBean etc etc
You can choose any of them and I'm sure you'll not be disappointed.
Click to expand...
Click to collapse
This Nexus s is my daily device and I'm using this for my Official works. as always as I'm dealing with my device and this rom is somewhat Slow oftenly it shows Force close message.
please give me your opinion as your experience which rom is the most Suitable for a Daily device. (nexus S)
asmOne said:
This Nexus s is my daily device and I'm using this for my Official works. as always as I'm dealing with my device and this rom is somewhat Slow oftenly it shows Force close message.
please give me your opinion as your experience which rom is the most Suitable for a Daily device. (nexus S)
Click to expand...
Click to collapse
So far this is the most stable rom i found for nexus s the latest release of AOSP JellyBean 4.1.2
But if you want something more up to date wait for the next release of AOSP KitKat it will be a great daily driver
asmOne said:
This Nexus s is my daily device and I'm using this for my Official works. as always as I'm dealing with my device and this rom is somewhat Slow oftenly it shows Force close message.
please give me your opinion as your experience which rom is the most Suitable for a Daily device. (nexus S)
Click to expand...
Click to collapse
SlimBean 4.1.2. Low on memory usage, stable and good features.
CataHd said:
So far this is the most stable rom i found for nexus s the latest release of AOSP JellyBean 4.1.2
But if you want something more up to date wait for the next release of AOSP KitKat it will be a great daily driver
Click to expand...
Click to collapse
I downloaded a 106.85 MB rom file but how to install it?
asmOne said:
I downloaded a 106.85 MB rom file but how to install it?
Click to expand...
Click to collapse
If you already have a custom rom on your device you already have a custom recovery on it
First step update it via rom manager from playstore or manually flash the latest one from here
Then go to recovery and
-Wipe Data Factory Reset
-Wipe Cash
-Advance Settings>Wipe dalvik cash
Then Install from recovery rom and gapps
-Reboot and then install Superuser for root
And final only if you need i added a filemanager in attachment that you can flash from recovery because the rom don't has one or you could download one from play store
CataHd said:
If you already have a custom rom on your device you already have a custom recovery on it
First step update it via rom manager from playstore or manually flash the latest one from here
Then go to recovery and
-Wipe Data Factory Reset
-Wipe Cash
-Advance Settings>Wipe dalvik cash
Then Install from recovery rom and gapps
-Reboot and then install Superuser for root
And final only if you need i added a filemanager in attachment that you can flash from recovery because the rom don't has one or you could download one from play store
Click to expand...
Click to collapse
Thanks a Lot i got it. just now installed Now I'm on now AOSP 4.1.2
asmOne said:
Thanks a Lot i got it. just now installed Now I'm on now AOSP 4.1.2
Click to expand...
Click to collapse
Also if you want even better performance you could try Air Kernel#350
It has more features than stock kernel and more free RAM
we got the same phone.
CataHd said:
Also if you want even better performance you could try Air Kernel#350
It has more features than stock kernel and more free RAM
Click to expand...
Click to collapse
I'm actually new to rooting android devices.
what is a KERNEL?
what can i have with a new Kernel? and How to install.
if i install a new kernel can it be break my device?
asmOne said:
I'm actually new to rooting android devices.
what is a KERNEL?
what can i have with a new Kernel? and How to install.
if i install a new kernel can it be break my device?
Click to expand...
Click to collapse
A kernel is the core of android but for more information just google it
To install just flash it like you flashed the rom and whipe cashe and dalvik
You will notice a better performance and also a better headphone sound thanks to voodoo sound mod(a kernel audio driver)
CataHd said:
A kernel is the core of android but for more information just google it
To install just flash it like you flashed the rom and whipe cashe and dalvik
You will notice a better performance and also a better headphone sound thanks to voodoo sound mod(a kernel audio driver)
Click to expand...
Click to collapse
Give me the best kernel you have used with installation instruction.
asmOne said:
Give me the best kernel you have used with installation instruction.
Click to expand...
Click to collapse
This one http://forum.xda-developers.com/showthread.php?t=1469842
Flash it in recovery and Wipe Cache and Dalvik Cache
Stock Kernel
Background:
When Verizon released the ML1 Update you had two options, take the new boot-loader and be locked or NOT take the new boot-loader and remain unlocked. If you choose the latter of the two options the firmware and boot-loader never got updated. This seemed Ok but it would cause WiFi not to work because of the way Verizon coded the kernel to look at the new firmware (from my understanding). If the firmware was not the new version thee WiFi would just never turn on.
Intent:
As the name implies, this is just a recompiled stock kernel without the "WiFi bug" for Android 4.3 / ML1 based ROMS on the OLD UNLOCKED firmware! If you have taken the new firmware (aka: the 4.3 OTA) then you dont have to worry about this! It does not apply to you! This is Only for people on the OLD UNLOCKED firmware!
Why no features added?
Not everyone wants a super duper overclock kernel with 10 million features. Some prefer the simplicity of stock. I am one of those people! This is just a STOCK kernel with no mods other than working WiFi for the ML1 base on the old unlocked firmware.
Note: Version 2 is posted with the exFAT option checked for those using exFAT. Oversight on original build!
Download Stock Kernel v2 HERE: Stock-Kernel-v2.zip - 8.42 MB
Dont be lame, hit Thanks!
Stock Samsung Kernel Source Code: HERE
Change Log
v2 - 1/27/2014
Added missing exFat support causing some users SD Card to never mount if formatted with exFat (thanks prdog for the heads up)
V1 - 1/26/2014
Initial Build
Just fixed the download link!
scrosler said:
Just fixed the download link!
Click to expand...
Click to collapse
Wow let's all show some love this dude is a beast of a developer and does things few others are willing to take on. A big standing ovation from me my friend.
Sent from my SCH-I535 using xda app-developers app
So I just replaced lean kernel with this kernel on old & slows stock rom and it seems to be much snappier so far, well done good sir
MIKEYSAKZ said:
Wow let's all show some love this dude is a beast of a developer and does things few others are willing to take on. A big standing ovation from me my friend.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Your Welcome!
chocolate8175 said:
So I just replaced lean kernel with this kernel on old & slows stock rom and it seems to be much snappier so far, well done good sir
Click to expand...
Click to collapse
Funny thing is... This is a PURE stock build. BUT... here are some oddities I noticed over the stock kernel from VZW...
1. The compiled size is smaller (odd)
2. I used the defconfig that samsung said to use and I dont think its the typical Verizon defconfig. The name just seemed weird.
Its been a long time since I did a kernel so my observations may be pointless...
But I can agree with your statement that it is very smooth. I am running the stock roooted ROM I made with this kernel and I am tempted to get rid of my Note 3!
I think Samsung posted the wrong source or modified it after Verizon used it for the ML1 ROM (or I downloaded the wrong one!!!! lol).
Hmm, that is interesting...
scrosler said:
Just fixed the download link!
Click to expand...
Click to collapse
4l
Thanks. Will test to see if I get better battery life over lk. Also grabbed your ml1 ROM version. Been waiting for the release. All previous ROMS have been the best. Thanks.
I usually keep 1 custom kernel and 1 stock kernel around, thank you for bringing the stock option!
EAGLEEYE51 said:
4l
Thanks. Will test to see if I get better battery life over lk. Also grabbed your ml1 ROM version. Been waiting for the release. All previous ROMS have been the best. Thanks.
Click to expand...
Click to collapse
Just so you know the ML1 ROM has this kernel in it.
AS far as battery life, Im sure LK will be better, ITs a tweaked kernel.
This is a pure stock build no changes to the code, AT ALL.
I didint even add in a build name. I just did make defconfig followed by make -j16.
The odd thing is, WiFi just happens to work but the Verizon build doesn't. Go figure!
Thats it!
After installing this kernel on old&slows ROM, my SDcard discounts and won't remount. I have wiped both caches and rebooted.
Anyone else having this issue? I don't have time to clean wipe right now, but I will try that when I have some time.
jskolm said:
After installing this kernel on old&slows ROM, my SDcard discounts and won't remount. I have wiped both caches and rebooted.
Anyone else having this issue? I don't have time to clean wipe right now, but I will try that when I have some time.
Click to expand...
Click to collapse
Just noticed I'm having the same issue. Can't mount.
Hmmm... I will check in about 5 hours when I get home.
I talked with one of my Site Admins and he said he had no issues running this kernel with SD Card. Granted he is running it on "my" stock rooted ROM.
What size are ya'll running? and what format?
scrosler said:
I talked with one of my Site Admins and he said he had no issues running this kernel with SD Card. Granted he is running it on "my" stock rooted ROM.
What size are ya'll running? and what format?
Click to expand...
Click to collapse
32 gig, exfat.
Just flashed your Rom. Same issue. Wiped cache, dalvik, and system.
gnader said:
32 gig, exfat.
Just flashed your Rom. Same issue. Wiped cache, dalvik, and system.
Click to expand...
Click to collapse
Hmmm, strange
I have a 32 Gig I can test when I get home.
I just tested a micro SD a guy at work had in his S4.
Had no issues with it.
scrosler said:
Hmmm, strange
I have a 32 Gig I can test when I get home.
Click to expand...
Click to collapse
Fir testing, I went back to lk 4 kernel. SD card works again. Flashing back to yours once more to test.
---------- Post added at 04:10 PM ---------- Previous post was at 03:57 PM ----------
gnader said:
Fir testing, I went back to lk 4 kernel. SD card works again. Flashing back to yours once more to test.
Click to expand...
Click to collapse
Went back to your kernel... SD card not working again.
Going back to lk. I'm a fan of stock bits. Looking forward to a fix. Thanks for your efforts on this kernel!
Working fine on slow&old 12/31 release. No problems with the SD card. Came from lean kernel and this actually seems snappier.
Sent from my SCH-I535 using XDA Premium 4 mobile app
bill15872 said:
Working fine on slow&old 12/31 release. No problems with the SD card. Came from lean kernel and this actually seems snappier.
Sent from my SCH-I535 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
How big is your card? Trying to narrow down why gnader and the other guy are having issues. Thanks for the feedback!
What is the most stable ROM for C2104 ?
I just want something that works :crying:
Not even the stock 4.2.2 works well. I get bootloops and wifi issues on every ROM I try.
First - Do not cry because of phone .
Second - Re-Flash newest stock (I recommend you to do that by Flashtool)
Third - BL Unlock , Root , Install Philz
4th - Make compresses backup of stock (Nandroid settings like compression available only in philz)
5th - Then feel free to flash CM 12 and ThunderZap .
jakubekw1997 said:
First - Do not cry because of phone .
Second - Re-Flash newest stock (I recommend you to do that by Flashtool)
Third - BL Unlock , Root , Install Philz
4th - Make compresses backup of stock (Nandroid settings like compression available only in philz)
5th - Then feel free to flash CM 12 and ThunderZap .
Click to expand...
Click to collapse
I've done all that, except for the Philz Touch. I'm running CWM with CM 12.
Is there ThunderZap available for CM 12 beta 3 already?
Everything still unstable, though. It's beta as it says in the name.
I'm looking for something, solid. Rock solid. Everything working ,no problems, no crashes.
Yes . 4.10
Well , don't use CM 12 , cuz it's unstable in web browsing and video playing .
jakubekw1997 said:
Yes . 4.10
Well , don't use CM 12 , cuz it's unstable in web browsing and video playing .
Click to expand...
Click to collapse
No.. I usually get crashes doing simple stuff.
Wifi stops working very often.
Many functions are still being developed.
Even when choosing ringtones I've noticed that some names do not belong to the respective ringtone.
I understand that it's beta and I'm not complaining. It's just not what I want for now.
I've used beta ROMs many times. I've even developed some stuff for PSP years ago. But now I don't have the time for crashes and bug reports.
Even the stock ROMs give me often crashes.
Stock
i test ALL roms. but finally i undestand the stock rom is better for us. All KK roms have BIG BUG
mohsen8710 said:
i test ALL roms. but finally i undestand the stock rom is better for us. All KK roms have BIG BUG
Click to expand...
Click to collapse
You mean 4.1, right? Because I got many crashes from stock 4.2
gmsalomao2 said:
You mean 4.1, right? Because I got many crashes from stock 4.2
Click to expand...
Click to collapse
no i mean the last one. and there is no crashes
mohsen8710 said:
no i mean the last one. and there is no crashes
Click to expand...
Click to collapse
I was using version 15.3.A.1.17. Customized from India, from Brazil and I've also tried 15.3.A.1.14 from Vivo_BR.
They all gave me sudden reboots.
Do you know how to fix that or which ROM works?
gmsalomao2 said:
What is the most stable ROM for C2104 ?
I just want something that works :crying:
Not even the stock 4.2.2 works well. I get bootloops and wifi issues on every ROM I try.
Click to expand...
Click to collapse
I've been using SlimKat for almost 3 months and I have no major bugs at all. Wifi and GPS work fine, I have no random freezes or reboots, no low volume bug...
There are only two problems that I can remember now: unable to move apps to SD card and error trying to search for networks manually.
gmsalomao2 said:
I was using version 15.3.A.1.17. Customized from India, from Brazil and I've also tried 15.3.A.1.14 from Vivo_BR.
They all gave me sudden reboots.
Do you know how to fix that or which ROM works?
Click to expand...
Click to collapse
i have never seen reboots on my divice
I think last update of 4.2 was most stable..... Proximity sensor was major bug in that
mohsen8710 said:
i have never seen reboots on my divice
Click to expand...
Click to collapse
What ROM do you use?
gmsalomao2 said:
What ROM do you use?
Click to expand...
Click to collapse
till week ago Stock 17.
and for one week cm11
Hi folks
I am using ressurection remix v5.4 android 5.1 based custom ROM on my N5 for a couple of days and facing some bugs which are
1. When I change app drawer animation sometimes app icons don't show on the whole page.
2. When screen rotate sometimes notification keys don't appears.
3. Facebook messenger doesn't popup. I can't use when I am using another app.
4. Most of the time when I restart the phone, 'android is optimizing the apps xx of xx' appears.
And some other bugs those I can't remember right now.
So I decided to change the ROM but confused which one to choose.
My need is a stable custom ROM with some beneficial changes and most importantly with no bugs.
I really need your help folks.
Thanks
bpy13 said:
Hi folks
I am using ressurection remix v5.4 android 5.1 based custom ROM on my N5 for a couple of days and facing some bugs which are
1. When I change app drawer animation sometimes app icons don't show on the whole page.
2. When screen rotate sometimes notification keys don't appears.
3. Facebook messenger doesn't popup. I can't use when I am using another app.
4. Most of the time when I restart the phone, 'android is optimizing the apps xx of xx' appears.
And some other bugs those I can't remember right now.
So I decided to change the ROM but confused which one to choose.
My need is a stable custom ROM with some beneficial changes and most importantly with no bugs.
I really need your help folks.
Thanks
Click to expand...
Click to collapse
The one I like. Stock+root+xposed
bitdomo said:
The one I like. Stock+root+xposed
Click to expand...
Click to collapse
I had no idea about xposed as I m not very expert android user. after ur reply I googled it and liked the idea. But only one thing I don't want to loose is the USB storage support because I didn't find this on stock rom without using any app.
I've been running Cataclysm for a few weeks now
Combine that with ElementalX kernel and my phone has been rock solid, great battery life (some of the best I've seen out of it) and I couldn't be happier.
linkboy said:
I've been running Cataclysm for a few weeks now
Combine that with ElementalX kernel and my phone has been rock solid, great battery life (some of the best I've seen out of it) and I couldn't be happier.
Click to expand...
Click to collapse
Shall I download elementalX kernel separately or I will get it with cataclysm rom. And if I have to download it then is the installation process is as same as installing rom ?
bpy13 said:
Shall I download elementalX kernel separately or I will get it with cataclysm rom. And if I have to download it then is the installation process is as same as installing rom ?
Click to expand...
Click to collapse
Cataclysm rom uses stock kernel, you have to download ElemetalX separately. First flash rom and than flash kernel, but you don't have to wipe anyting before kernel flashing.
dimi3ye said:
Cataclysm rom uses stock kernel, you have to download ElemetalX separately. First flash rom and than flash kernel, but you don't have to wipe anyting before kernel flashing.
Click to expand...
Click to collapse
Thanx dimi3ye....last night I flashed the cm12 nightly caz I downloaded it before and installed the elementalx 2.10 stock/aosp version. Very much satisfied with the kernel as its giving me pretty good standby battery life though I m using the dt2w option and most importantly impressed with the sound gain option.
But still worried about custom ROM because cm12 launcher still has some bugs. So I need to know about cataclysm ROM what are the best picks of the ROM and the stability.
bpy13 said:
But still worried about custom ROM because cm12 launcher still has some bugs. So I need to know about cataclysm ROM what are the best picks of the ROM and the stability.
Click to expand...
Click to collapse
Cataclysm is based on factory images, so it is rock stable rom with excellent features. For me, Cataclysm is best rom so far.
dimi3ye said:
Cataclysm is based on factory images, so it is rock stable rom with excellent features. For me, Cataclysm is best rom so far.
Click to expand...
Click to collapse
Okay folk....let's try it....ohh another thing...if i flash cataclysm now will the kernel remain the same or it will flash to stock (sorry for the bad English and for the bothering bcoz I m new to android)
bpy13 said:
Okay folk....let's try it....ohh another thing...if i flash cataclysm now will the kernel remain the same or it will flash to stock (sorry for the bad English and for the bothering bcoz I m new to android)
Click to expand...
Click to collapse
Your curent kernel will be reflashed with kernel that comes with Cataclysm... Read first page on Cataclysm tread for flashing instructions, because latest version is sometimes just update (~ 30mb), and first you have to flash major, big version (~ 550mb) before that update...
dimi3ye said:
Your curent kernel will be reflashed with kernel that comes with Cataclysm... Read first page on Cataclysm tread for flashing instructions, because latest version is sometimes just update (~ 30mb), and first you have to flash major, big version (~ 550mb) before that update...
Click to expand...
Click to collapse
Lol....yeah I have that quantity of brain my friend......now I am downloading 21st march stable version of 5.1. Can i update latest updates over ota bcoz one of the last updates has in call proximity sensor option which is attractive.
bpy13 said:
Lol....yeah I have that quantity of brain my friend......now I am downloading 21st march stable version of 5.1. Can i update latest updates over ota bcoz one of the last updates has in call proximity sensor option which is attractive.
Click to expand...
Click to collapse
Sorry, I didn't mean to offend you... You have to flash updates via recovery.
Ohhh my friend I m not offended...just chilling.....okay do I have to maintain the sequence of the updates or just have to flash the last update. And does the major file comes with gapps or I have to flash it separately??
dimi3ye said:
Sorry, I didn't mean to offend you... You have to flash updates via recovery.
Click to expand...
Click to collapse
Ohhh my friend I m not offended...just chilling.....okay do I have to maintain the sequence of the updates or just have to flash the last update. And does the major file comes with gapps or I have to flash it separately??
bpy13 said:
Ohhh my friend I m not offended...just chilling.....okay do I have to maintain the sequence of the updates or just have to flash the last update. And does the major file comes with gapps or I have to flash it separately??
Click to expand...
Click to collapse
Gapps are included in rom. Usually, just flash latest update, if something else is needed, there is a description.
dimi3ye said:
Gapps are included in rom. Usually, just flash latest update, if something else is needed, there is a description.
Click to expand...
Click to collapse
Thanx a lot
bpy13 said:
Thanx a lot
Click to expand...
Click to collapse
One more advice, don't use twrp 2.8.6.x because it have some issues, use 2.8.5.3 instead...
dimi3ye said:
One more advice, don't use twrp 2.8.6.x because it have some issues, use 2.8.5.3 instead...
Click to expand...
Click to collapse
I am on 2.8.5.2...is it OK??
And one more thing...can u tell me the difference between beta version vs stable of cataclysm?
bpy13 said:
I am on 2.8.5.2...is it OK??
And one more thing...can u tell me the difference between beta version vs stable of cataclysm?
Click to expand...
Click to collapse
2.8.5.2 is fine... stable release means that every feature works perfect, beta is also rockstable rom, but new added features might have small issues (usually everything works perfect). I always flash latest whether is stable or beta, never had issues.
dimi3ye said:
2.8.5.2 is fine... stable release means that every feature works perfect, beta is also rockstable rom, but new added features might have small issues (usually everything works perfect). I always flash latest whether is stable or beta, never had issues.
Click to expand...
Click to collapse
didn't download the beta which has proximity sensor speaker option.