Need help, rooted my phone annnd...... - Sprint Galaxy S 5 Q&A, Help & Troubleshooting

The good news is it is still working.
I have been Google searching and so far I have:
Rooted the phone using Odin3-v3.10.6
Installed Titanium Backup Pro
Installed SuperSU
Installed Titanium Media Sync
Installed DropBox, synced with TB Pro...(I think)
I ran an initial back up with TB and then proceed to Uninstall:
KLMS Agent 2.4.15
KNOX SetupWizardclient 2.3.0
BlurbCheckout 1.0 (Build 204)
Internet 2.1.34.32-0_110500_427229
com.sec.android.app.sbrowsertry 2.1.34.193820
I uninstalled com.sec.android.app.sbrowsertry 2.1.34.193820 by accident, so I ran Restore all apps with data, This did not restore it, nor did it restore any of the others that I unistalled. I then ran Restore all system data, and I can still not get the uninstalled things restored.
The phone still works but I am at a point now that I want the stock firmware and install it on the phone, I thought I had the stock firmware but when I try to load it with Odin, it fails. Here is the log:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900PVPU1ANCB_G900PSPT1ANCB_G900PVPU1ANCB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1005)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> aboot.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL! (Auth)
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The name of the firmware I D/L
G900PVPU1ANCB_G900PSPT1ANCB_G900PVPU1ANCB_HOME.tar.md5
I have tried to read and avoid coming here just to have information spoon fed to me, I belong to a car forum that we encourage doing research before just asking for help. I need the latest Sprint SM-G900P firmware, the device is running Android 5.0
I have thought about trying the [ROM][MOAR] v7.0 Lollipop Killer / Ultimate Control / Be a Boss [08.27.15] but until I get a better understanding of what I am doing and what I did wrong, I just want to get the phone back to square one.

I managed to solve my own problem, I did some more digging and realized that you need to uncheck "Auto Reboot" and "F. Rest Time". After that the stock ROM loaded just fine.

Related

[Q] Help to flash Note 2 with stock ROM 4.3

Hello
I decided to try jedi master x2 (the version of my stock ROM was 4.3). After trying it out for a while I noticed poor battery performance and when phone was locked I had to press the menu button several times to see the screen. Yesterday my phone was booting up by itself. It did a couple times then got stuck with the samsung logo. Reboot again and again and the same stuff happened that's when I decided to flash stock rom from samsung.updates/device site using odin3 v3.09 however, I have not been successful. After it checks the md5 OK, it fails on the NAND write. Is it the case that the NAND memory is not unlocked? I am still able to boot into recovery though. I'd appreciate if anybody can land me a hand on how to flash stock rom on my device.
Thanks
** Update to the issue above 1/13/14 8:24 AM
I use ODIN 3.09 to upload the md5 I got from samsung.updates.com I get this:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T889UVUCMK7_T889TMBCMK7_T889UVUCMK7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am able to boot into recovery mode. I have not tried to upload any other ROM to my sdcard and install it there. The stock ROM I had before was Android version 4.3.
I read this post http://forum.xda-developers.com/showthread.php?t=2470262&page=3
then I looked at my device and read the following:
custom binary download: Yes (1 counts)
current binary: custom
system status: custom
knox warranty void: 1 <--- I think that's the problem
As you may know knox is a security feature which helps you to securely separate your personal and professional data. Well, in my case is not helping at all.
Another question: How am I going to remove knox with my phone only able to get into recovery or download mode?

[SOLVED] Hard-bricked my S6??

Hey guys, I just got my S6 (SM-920I) and went to root it the instant I got home. And that was where the problem all started. I used chainfire's auto-root and flashed it in odin under AP. The log in odin shows the firmware flash was successful but upon reboot my phone stays stuck on the boot logo screen. So I went to un-brick it by downloading the appropriate stock firmware for my phone (G920IDVU1AOD1_G920IOLC1AOD1_XSP.zip) (my phone is the Singapore variant of the 920I). This is the error I got on odin no matter how many tries I did.
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920IDVU1AOD1_G920IOLC1AOD1_G920IDVU1AOD1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1005)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> cm.bin
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
And now I have no clue on how to fix and restore my phone back to its original state anymore. Help is greatly appreciated thanks!
EDIT: Solved... Just a simple reboot of my PC fixed the problem for me apparently...

[Completed] galaxy S6, bootloop, odin - write operation failed.

Hi. i have recently acquired an Samsung S6 SM-G920P. it was rooted with 5.0.1 and it was freezing and restating.
So flash/stock firmware marshmallow but it got stuck at optimizing apps. I restarted the phone and managed to skip it (don't know how). After all the process of name, date&time zone, wifi config, etc...about 10-20min it freezes again and restarts. So i tried to update the software via otta, and android gave me a 19mb, but the same happened, it got stuck at optimizing apps.
After that it began to freezing more and more often. I tried to change the firmware to another version with odin, but now odin shows an error (write operation failed). I installed TWRP and wipe dalvkin/cache and cache and after that, it started to boot-loop and mi stuck on it.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help me, don't know what else to do.
ill be around often here to check any update on the thread but if anyone can contact me, ill be grateful
whatsapp: +258844797495, [email protected]
Well ,
Ur s6 won't install old bootloader over the newer bootloader mate , so try to use the latest firmware that have the newer bootloader or at least the same firmware that have the same bootloader on ur device ,
Good luck
Thank you for Using XDA Assist ,,

Odin Failed to flash Samsung Galaxy S6 SM-G920W8

I have majorly screwed up. I rooted my Samsung Galaxy s6 without any problems, it worked out fine. Today I wanted to go back to stock so I could upgrade to 6.0.1....Now I am screwed.
I unrooted my phone through the SuperSU app, which probably wasn't the best idea. It rebooted but stuck at the Samsung Galaxy S6 screen and wouldn't proceed.
I then went online to SamMobile and found the stock firmware for my phone. Halfway through, Odin crashed, wirst off with some sort of Write Error...I left it for 10 minutes or so, nothing else happened.
I rebooted my phone, it kept going into that same screen and wouldn't let me proceed.
I tried flashing again, now I have an error saying "No PIT partition detected"
Rebooted my phone once more, I now have a screen says "An error has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC software"
I tried again, that the info below is my latest result in which it states that some NAND Write operation has failed....
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920W8VLU3BOJ7_G920W8OYA3BOJ7_G920W8VLU3BOJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!

Help: Samsung S6 SM-G920F (post-root problems)

Originally posted to reddit.com/r/androidtechsupport/
Hello everybody.
Ok so let's put it straight, I'm one of those tech noobs trying to do **** on PC and Android but failing almost everytime.
I wanted to be able to install Lucky Patcher on my Samsung S6 SM-G920F so I followed one simple and basic guide by tomsguide(dot)com on rooting my phone that told me to install Odin and then flash a file name "CF-Auto-Root-zeroflte-zerofltexx-smg920f.tar.md5" on AP. Then reboot.
I went on with updating SuperSU, installing Busybox and Lucky Patcher and was finally able to cheat in a solo game I downloaded last week.
Since then, I am not able to install ANY App (external or Play Store). Downloading works fine but I get either invalid APK file (adb install command) or Error -505 from Google Store.
Now I thought, I might as well just undo the root through Odin and then begin from somewhere else, because I don't know the root cause.
I then followed a guide buy wonderhowto(dot)com to un-root and flash into firmware (right country etc.) but now I am stuck with this log on Odin:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> FAIL!
<ID:0/005> <ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and on my phone screen (odin mode) it says: "SW REV. CHECK FAIL. DEVICE: 4, BINARY: 3
Can anybody help me out of the mess I made?
I'd like to install a custom ROM (CarHDRom_V.27.0_5DPL4.zip) - be able to install any app - use lucky patcher again.
PS: I already did a factory reset, but it did not help.

Categories

Resources