Database Info

[Q] Is there a way to recover from a hard-brick?

So I basically made an update to 3.0 beta software made by Huawei for H60-L04, but the update bricked my phone (I think it has to do with the fact I had flashed 3.0 L01 firmware on my L04 some days before).
My phone now won't turn on, even if I plug it or hold Power for more than 20 seconds.
Does anybody know of a way of making it work again? I won the phone through a partnership between Honor and another site I go to, and thus I don't have the invoice, so any RMA return is impossible for me.
Thank you.

matzehtc has nearly the same problem. He flashed the L04 on his L02 and tried to flash it back to L02. More info about his problem is in the main HH6 thread
I have a L12 with L04 Firmware and I want back to L12 too. But atm I am to scared to flash it back to L12
So I am interested too, if there is a way reverting back to L12.
I flashed the offical 60-70 MB revert update from Huawei (EMUI 3.0 to EMUI 2.3). After this I could flash the L04 Update. No root no unlock was needed.

Julsen1985 said:
matzehtc has nearly the same problem. He flashed the L04 on his L02 and tried to flash it back to L02. More info about his problem is in the main HH6 thread
I have a L12 with L04 Firmware and I want back to L12 too. But atm I am to scared to flash it back to L12
So I am interested too, if there is a way reverting back to L12.
I flashed the offical 60-70 MB revert update from Huawei (EMUI 3.0 to EMUI 2.3). After this I could flash the L04 Update. No root no unlock was needed.
Click to expand...
Click to collapse
I found matzehtc's posts. Unfortunately, they didn't really help me, because on mine, even the 3 buttons procedure doesn't switch the phone on.

Demazda said:
I found matzehtc's posts. Unfortunately, they didn't really help me, because on mine, even the 3 buttons procedure doesn't switch the phone on.
Click to expand...
Click to collapse
If you charge the phone, is the charging led flashing?
If not, maybe its in some strange loop and its needed to disconnect the battery or wait till it is empty. Disconnecting is a litte bit hard in this phone.

Julsen1985 said:
If you charge the phone, is the charging led flashing?
If not, maybe its in some strange loop and its needed to disconnect the battery or wait till it is empty. Disconnecting is a litte bit hard in this phone.
Click to expand...
Click to collapse
Nope, no flashing led.
I'll wait till it's empty, but it's already been 2 days and it's still not.

Demazda said:
Nope, no flashing led.
I'll wait till it's empty, but it's already been 2 days and it's still not.
Click to expand...
Click to collapse
during my last phone s3 mini i had this problem.....total dead......i went to service center and they changed my cpu ....the problem is when i changed kernel i flashed a wrong kernel that burn my cpu.......

Demazda said:
So I basically made an update to 3.0 beta software made by Huawei for H60-L04, but the update bricked my phone (I think it has to do with the fact I had flashed 3.0 L01 firmware on my L04 some days before).
My phone now won't turn on, even if I plug it or hold Power for more than 20 seconds.
Does anybody know of a way of making it work again? I won the phone through a partnership between Honor and another site I go to, and thus I don't have the invoice, so any RMA return is impossible for me.
Thank you.
Click to expand...
Click to collapse
You don't have adb access into the phone either? I had bricked my phone earlier, but I managed to recover it by accessing the device through a software called QtADB and reverting back to the original system files.

itsnotmeatall said:
You don't have adb access into the phone either? I had bricked my phone earlier, but I managed to recover it by accessing the device through a software called QtADB and reverting back to the original system files.
Click to expand...
Click to collapse
No, I don't have access to that.
But today, Huawei agreed to exchance it for a brand new unit, so I guess it's okay. I just have to send them the bricked phone and I'll get a new one.
Also, thanks to everyone for their answers. I don't think I'll be flashing another Chinese firmware anytime soon now.

Demazda said:
But today, Huawei agreed to exchance it for a brand new unit, so I guess it's okay. I just have to send them the bricked phone and I'll get a new one.
Click to expand...
Click to collapse
How you managed to get feedback from them? I wrote an email one week ago and till now not a single answer

Julsen1985 said:
How you managed to get feedback from them? I wrote an email one week ago and till now not a single answer
Click to expand...
Click to collapse
I wrote them on their Facebook ( https://www.facebook.com/HonorFR ), and they told me to write them an email at their support email ( [email protected] ).
Don't know if you can contact them like that outside of Europe, but you can go there: http://hihonor.com/support and send them an email through here too.

Thx, but it seems the german Huawei Facebook team do not care about giving support. Like the mail support... no reaction.

The German support generally ignores every request seemingly. If then I'd ask the British support (or the French if you can)

Yeah, after nearly 2 weeks they answered my email. They told me that they only give Support for phones which are available on their german page and do not support customer with imported phones.
Gesendet von meinem H60-L04 mit Tapatalk

Got my new unit this morning, and in the meantime I had received my TouchPlus screen protector... I can say it's a really nice combo.
And the French Honor team is really nice, too. They are really fast responding and really seem to care about customers, which to me is a nice thing. I also had a software bug with the Bitcasa app and they said they would contact their dev team to fix it asap, so I'm pretty satisfied with customer support.
Well anyway, thanks everyone here who tried to help me too!

[GUIDE] Debranding to C432 and updating to B361 (Nougat) for EVA-L09

Like many people here, I was eager to get onto Android 7 but the issue I faced was the fact that I got a branded phone and a long wait till I officially get the Android 7 update. Looking through this forum I was very put off on manually updating it to Android 7 with so many threads about bricked phones. However, the urge to get onto Android 7 was too great so ultimately, I decided to do my research and just do it. I am not new to flashing and custom roms but I am new to Huawei but I had confidence that I will recover if I do brick my new P9. In the end (after a few bricks and a couple of mild heart attacks), I got there and to get there, I needed to grab information from multiple threads. So I have decided to put together this guide so people have a singular guide to debrand and get onto Android 7. Below are steps and threads I took to debrand my C34 to C432 and update it to B361.
What listed below is what I did to get onto Android 7, this may or may not work for you so use this guide at your own risk.
Using this Guide - Please read through this guide BEFORE attempting it. There is a lot of large files to download so I recommend that you download everything you need before you make a start and a fast and reliable internet is strongly recommended.
Prep Work
- Backup all your data because your phone will get wiped.
- Make sure you have the stock recovery already flashed and make sure your phone is not rooted (may not be necessary but this was the state my phone was in).
- Get yourself a bootloader code from Huawei. Go to http://www.emui.com/en/plugin/hwdownload/download, you will need to create a Huawei ID if you haven't already done so. Click on the Unlock Bootloader link and fill out the form, you should get a bootloader code almost instantly after submitting the form.
- Download and install HiSuite (http://consumer.huawei.com/minisite/HiSuite_en/index.html).
- Download the SRK Tool from here: https://forum.xda-developers.com/showpost.php?p=66737472&postcount=2
Now lets make a start.
1. Download and flash the dload-huawei-p9-eval09-eva-b136.zip from this thread: https://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818. Instructions on how to flash this is in the first post. After flashing, you should be on the L09C900B136 firmware. NOTE: If it boots up to a white screen asking you to enter password, reboot into recovery by holding volume up when you powering up your phone, do a wipe partition and factory reset. You may need to reboot your phone a number times before the phone boots up correctly.
2. After flashing and booting into the L09C900B136 firmware, you will need to unlock your bootloader and install TWRP. You can use the SRK Tool to do this, please have a look at this thread (https://forum.xda-developers.com/showpost.php?p=66737472&postcount=2) and watch the video on how to do this. NOTE: You only need to unlock bootloader and install the TWRP recovery.
3. After your phone has been unlocked with TWRP recovery installed, download oeminfo-huawei-p9-eval09-c432.zip from this thread: https://forum.xda-developers.com/p9/development/c432-oeminfo-flash-twrp-t3384903 and flash it via TWRP. To get into TWRP, power off your phone and go into recovery by powering up your phone while holding volume up.
4. Once you flashed the oeminfo file via TWRP, power off your phone and repeat step 1. So you need to flash the dload-huawei-p9-eval09-eva-b136.zip file again via the dload method (power on the phone while holding volume up and volume down). NOTE: When you flash this firmware again, it will lock your bootloader (Fastboot will tell you that the phone is unlocked but I assure you, your bootloader is locked) and restore to stock recovery.
5. Once your phone has booted back up, go into the phone settings and you should see that your phone is now on the EVA-L09C432B136 firmware. To test that the firmware is working as intended, go into the phone settings and go into Updater, updater should pick up the B182 firmware and you should be able to update it to B182 without an issue.
UPDATE: A number of people has reported that they are getting the B166 update instead of B182, if this happes, do a wipe partition and a factory reset after updating to B166. When you get back in, you should be able to update to B182 via Updater in the Settings menu. If this method does not work, you can manually update to B182 by following the steps here: http://www.carbontesla.com/2016/11/download-huawei-p9-b182-marshmallow-update-europe/
6. After your phone has rebooted and you are on the B182 firmware, you need to now update the firmware to B361 via Huawei Updater 2.0 using this guide: https://forum.xda-developers.com/showpost.php?p=70594380&postcount=2.
After all that is done, you should now have a debranded UK C432 P9 running EMUI 5.0.
Special thanks to @paulobrien, @somboons and @KrAzYtHeBoY for their guide, tools, files and video to make this update possible.

Props to you sir. I will try this when I get back. I don't have any doubts now after reading this guide.

Does debranding will affect warranty of the device? Mine is quite new.

zoold3vil said:
Does debranding will affect warranty of the device? Mine is quite new.
Click to expand...
Click to collapse
Its very likely that debranding will void your warranty since you will need to unlock the bootloader and flash a firmware that is not the same as your original model.

Z-Blade said:
Its very likely that debranding will void your warranty since you will need to unlock the bootloader and flash a firmware that is not the same as your original model.
Click to expand...
Click to collapse
Thanks for the feedback!

Thanks for the guide. I've recently been battling away trying to go from C34 to C636 - still never got to the bottom of it.
Is that a typo in your post for your original model number - C43? Or did you come from Optus AU C34?
Either way - have you had any network issues in Australia with the new firmware?
Cheers.

halliday77 said:
Thanks for the guide. I've recently been battling away trying to go from C34 to C636 - still never got to the bottom of it.
Is that a typo in your post for your original model number - C43? Or did you come from Optus AU C34?
Either way - have you had any network issues in Australia with the new firmware?
Cheers.
Click to expand...
Click to collapse
Yep, its a typo, thanks for pointing it out. I have no issues what so ever, everything works perfectly fine and there has been no drop in cellular reception, wifi reception, GPS accuracy and etc. Apart from the build saying L09C432, you wouldnt be able to tell the difference.

Z-Blade said:
Yep, its a typo, thanks for pointing it out. I have no issues what so ever, everything works perfectly fine and there has been no drop in cellular reception, wifi reception, GPS accuracy and etc. Apart from the build saying L09C432, you wouldnt be able to tell the difference.
Click to expand...
Click to collapse
Legend. Appreciate the reply - it was tough to find experienced Aussies on the same starting build/carrier.
Now I just wish I hadn't wasted the time going for the Asia Pacific variant!
Will get stuck into it this evening.
Thanks!

Great guide! Reading through it seems easier for it to be managed through hisuite/windows but I have a big issue. For some reason my computer won't recognize my phone! I installed the beta and am on build number EMUI-A168-L09C900B040SP11-log and since doing this stupid move I have been unable to connect to a computer nor install other builds or rollbacks directly on the device so I just feel like smashing it and claiming the insurance. Is there any advise that could be offered to maybe force a firmware upgrade?

Nawor81 said:
Great guide! Reading through it seems easier for it to be managed through hisuite/windows but I have a big issue. For some reason my computer won't recognize my phone! I installed the beta and am on build number EMUI-A168-L09C900B040SP11-log and since doing this stupid move I have been unable to connect to a computer nor install other builds or rollbacks directly on the device so I just feel like smashing it and claiming the insurance. Is there any advise that could be offered to maybe force a firmware upgrade?
Click to expand...
Click to collapse
How did you get onto that build? Have you tried following the guide I put up?

Ha I don't have a clue how I ended up with that build but I've regretted my decision to install a beta version of the nougat every day since. I will try this method this afternoon and see how I go!

Nawor81 said:
Ha I don't have a clue how I ended up with that build but I've regretted my decision to install a beta version of the nougat every day since. I will try this method this afternoon and see how I go!
Click to expand...
Click to collapse
I cant promise you that the guide I put together will work for you. If its a Nougat beta firmware then you would be technically doing a rollback to MM. Just a bit of a warning, a lot of people who try to roll back to MM, usually encounter problems, annoying problems. Unfortunately, I dont have much experience with this phone or how Huawei does things so I cant help you much. If I am in your shoes, I wouldn't attempt to debrand and flash Nougat using this guide.

Z-Blade said:
I cant promise you that the guide I put together will work for you. If its a Nougat beta firmware then you would be technically doing a rollback to MM. Just a bit of a warning, a lot of people who try to roll back to MM, usually encounter problems, annoying problems. Unfortunately, I dont have much experience with this phone or how Huawei does things so I cant help you much. If I am in your shoes, I wouldn't attempt to debrand and flash Nougat using this guide.
Click to expand...
Click to collapse
That's not the news I wanted to hear! I guess I'll keep this guide in mind and do some more research, hopefully find someone in love with Huawei that might be able to assist. Thanks

SmartPhonesFan said:
Hi z-blade I flashed B136 but it didn't put icons and themes back .. I flashed B182 and STILL didn't put icons and themes back
BUT only B166 gave me proper theme and icons back.. ! After that I flashed I had to flash B182 and so on.. B166 is the key important
Click to expand...
Click to collapse
I got theme and icon on mine but it may have came through when I flash B361. I went from a full factory reset on B136 to B182 to B361, not once did I stop to check to make sure all of the apps are installed, I only started setting up my phone and have a browse once I was on EMUI 5.0. It may be un-necessary to flash B166 if flashing B361 give you themes and icons.
If someone could double check on this when following this guide and report in, that would be great. I am not willing to test it out by rolling back to mushmellow.

Nawor81 said:
Ha I don't have a clue how I ended up with that build but I've regretted my decision to install a beta version of the nougat every day since. I will try this method this afternoon and see how I go!
Click to expand...
Click to collapse
Are you on an unbranded device?
If so, the official Huawei support page offers a rollback package if you updated to the Nougat beta.
Make sure you go to the page specific to your country.
---------- Post added at 02:42 AM ---------- Previous post was at 02:34 AM ----------
Z-Blade said:
I got theme and icon on mine but it may have came through when I flash B361. I went from a full factory reset on B136 to B182 to B361, not once did I stop to check to make sure all of the apps are installed, I only started setting up my phone and have a browse once I was on EMUI 5.0. It may be un-necessary to flash B166 if flashing B361 give you themes and icons.
If someone could double check on this when following this guide and report in, that would be great. I am not willing to test it out by rolling back to mushmellow.
Click to expand...
Click to collapse
Broken themes/icons seem to be caused by missing assets in the /CUST/ partition. I managed to get around it on my broken C900 firmware by separately flashing the /hw/normal/ package specific to the build. These can be found in the filelist.xml in the [WAREHOUSE] post - but you need to change the URL manually to grab the file.

SmartPhonesFan said:
So B361 will? Didn't know that.. Didn't want to risk it it took ages to download.. I had 3 folders in B136 but I flashed it via dial pad options.. Not 3btn..maybe if I would flash via 3btn it will give it back then and I wouldn't need B166..
Cannot be bothered.. It's done now..
Nougat best..
Click to expand...
Click to collapse
It makes no difference if you use the 3 button method or via the dial menu, both does exactly the same thing. I am only assuming that Themes could be installed when I flashed B361, I was not paying attention to the apps that was installed but I think this may be the case because I believe the Theme app was updated for EMUI 5.0, again all assumptions here.

Can I jump directly from b136 to b361?
Thanks in advance.

halliday77 said:
Are you on an unbranded device?
If so, the official Huawei support page offers a rollback package if you updated to the Nougat beta.
Make sure you go to the page specific to your country.
Click to expand...
Click to collapse
It's from Vodafone unfortunately

I've followed the guide as far as step 5. When I got there, I ended up getting an update for L09C432B166 which installed fine, but I'm not getting the B182 update. Anyone else run into an issue like this?

trouble2000 said:
Can I jump directly from b136 to b361?
Thanks in advance.
Click to expand...
Click to collapse
No you cant, you need to get to B182 before flashing B361.
d_mouse81 said:
I've followed the guide as far as step 5. When I got there, I ended up getting an update for L09C432B166 which installed fine, but I'm not getting the B182 update. Anyone else run into an issue like this?
Click to expand...
Click to collapse
Try wiping partition and a factory rest and see if you get the B182 update. If not, you can download the B182 update and flash it via dload but if that does not work, you can try doing it via the Hisuite and Updater method.

Bricked Mate 8. Touch functions no longer working

So to make things worse, I no longer have Touch function in TWRP, eRecovery, or any other pre-OS environment. Can anybody shed some light?

srdjmor said:
Can anybody shed some light?
Click to expand...
Click to collapse
Sure, stop creating multiple threads.

srdjmor said:
So to make things worse, I no longer have Touch function in TWRP, eRecovery, or any other pre-OS environment. Can anybody shed some light?
Click to expand...
Click to collapse
Use Logitech Wireless Touch Keyboard K400 or any keyboard with touchpad built in via mirco port.

srdjmor said:
So to make things worse, I no longer have Touch function in TWRP, eRecovery, or any other pre-OS environment. Can anybody shed some light?
Click to expand...
Click to collapse
You reached the same dark place I reached one week ago...I tried to root b560 after upgrading to Nougat from b200 on L29 C158....but I could not and the system failed then I tried to go back to b200 ...My phone started to do strange things like failure to fast boot any ROM ..at last touch stopped ...Finally, I destroyed my phone when I purchased Credits on DC Unlocker and tried the second Method on their site ...The result was that my phone is dead (No power...No Battery Working....No charging ....Not recognised by PC) so I advise you to stop at this point till you find a way to fast boot Nougat....Do NOT go back to 4.1 as it will surely destroy your phone permanently....

basimzanaty said:
You reached the same dark place I reached one week ago...I tried to root b560 after upgrading to Nougat from b200 on L29 C158....but I could not and the system failed then I tried to go back to b200 ...My phone started to do strange things like failure to fast boot any ROM ..at last touch stopped ...Finally, I destroyed my phone when I purchased Credits on DC Unlocker and tried the second Method on their site ...The result was that my phone is dead (No power...No Battery Working....No charging ....Not recognised by PC) so I advise you to stop at this point till you find a way to fast boot Nougat....Do NOT go back to 4.1 as it will surely destroy your phone permanently....
Click to expand...
Click to collapse
Yeah i read your post earlier. I just need to find stock FW for NXT-DL00 or NXT-L29 that works, because my NXT-DL00 came with the european FW NXT-L29

srdjmor said:
Yeah i read your post earlier. I just need to find stock FW for NXT-DL00 or NXT-L29 that works, because my NXT-DL00 came with the european FW NXT-L29
Click to expand...
Click to collapse
but just install Nougat ...Don't go back to 4.1 or 4.0 ...Good Luck....Don't use DC Unlocker....or you will kill your phone....and just to warn others about them ...When I just put a thread on their Forum, they didn't help me at all ...and they didn't let others help me by deleting my thread and even deleted my registration in their forum, although I paid around 19 Euros.....

basimzanaty said:
but just install Nougat ...Don't go back to 4.1 or 4.0 ...Good Luck....Don't use DC Unlocker....or you will kill your phone....and just to warn others about them ...When I just put a thread on their Forum, they didn't help me at all ...and they didn't let others help me by deleting my thread and even deleted my registration in their forum, although I paid around 19 Euros.....
Click to expand...
Click to collapse
Thanks. Do you have a link for the Nougat ROM I should use?

Nougat won't do a 3 botton restore. The problem is in the fact you deleted the inf files for touch. I have a friend that works at huawei that can fix this with out wrecking your phone. Pm message me.

When People more read in the Forum,no Problems with all.
I flash Nougat on my Phone as C636 or C432 and go back on Emui 4.0 or 4.1 and all without any Problem.

Random reboot to Erecovery

Hi, anyone else had a random reboot to Erecovery? Last night was the second time that I left my MHA-L09C432B156 on charge, all was fine, and wake during the early hours before needing to get up to see that the phone was randomly on Erecovery. I unplugged the charger, forced a reboot and it booted back up normally.
Found it a bit weird and luckily I noticed this before I was due to wake or else the alarms wouldn't have gone off!

Happened to me twice as well. No idea why it did that though.
Haven't had this problem for the past 3 weeks. I didn't change anything, it just went away by itself.
But I think the alarm is going to work anyway: when you turn off the phone there's an option to keep the alarm even though the phone is shut off. Might work as well when in eRecovery (you could test it).
Sent from my MHA-L29 using XDA-Developers Legacy app

Alta1r said:
Happened to me twice as well. No idea why it did that though.
Haven't had this problem for the past 3 weeks. I didn't change anything, it just went away by itself.
But I think the alarm is going to work anyway: when you turn off the phone there's an option to keep the alarm even though the phone is shut off. Might work as well when in eRecovery (you could test it).
Click to expand...
Click to collapse
Ahh glad I'm not the only one! I guess I could have a logcat running and check that next time it happens, but indeed not a frequent problem so will just have to see how it goes....

On a second thought: are you rooted?
If so, how did you root? I think this "problem" didn't occur to me anymore as soon as I 'fully' rooted the phone (changes to system survive a reboot now).

Alta1r said:
On a second thought: are you rooted?
If so, how did you root? I think this "problem" didn't occur to me anymore as soon as I 'fully' rooted the phone (changes to system survive a reboot now).
Click to expand...
Click to collapse
I am rooted, with the superuser.zip method, how about you?

Right now I'm rooted using rainondomartire's zip (it's for Mate 9 Pro but works the non-Pro version too). But before that I was on the first root method that was available for our Mate 9's, and that is when the reboot to eRecovery occurred twice. Might not be related at all though but haven't had it since (yet).

Alta1r said:
Right now I'm rooted using rainondomartire's zip (it's for Mate 9 Pro but works the non-Pro version too). But before that I was on the first root method that was available for our Mate 9's, and that is when the reboot to eRecovery occurred twice. Might not be related at all though but haven't had it since (yet).
Click to expand...
Click to collapse
Ah nice, do you have a link to that one? Perhaps I could unroot and root again with that zip instead? Could I just flash it over it do you know?
Cheers

Link is https://forum.xda-developers.com/showthread.php?t=3546976
You will need to flash a clean boot.img first and then flash the zip that's on the first page. You can extract the boot.img from an update.zip if you have one, otherwise on the 3rd or 4th page the OP uploaded as well.
Sent from my MHA-L29 using XDA-Developers Legacy app

Alta1r said:
Link is https://forum.xda-developers.com/showthread.php?t=3546976
You will need to flash a clean boot.img first and then flash the zip that's on the first page. You can extract the boot.img from an update.zip if you have one, otherwise on the 3rd or 4th page the OP uploaded as well.
Click to expand...
Click to collapse
Thank you for providing this, will try it out sometime!

new firmware FRD-L09C432B380

Today i have receive update info by ota from server Huawei (420mb)
Optimize battery use.
Root and twrp i can use after flash ?
Thanks

you will have to re-root after the update (for me i had to)
with b380 i have flashed the modified boot.img (b378), flashed twrp 3.1.0.0, and after reboot the phph superuser on playstore . it works well.

Yeah got this update two days ago, My battery lasts longer now love it. I sold my galaxy S7 Edge, I felt it was a let down phone for me. Using my honor 8 full time till I get me a better phone. This will always be my go to phone..

I am hoping I get it for my phone soon.

Meemo23 said:
Yeah got this update two days ago, My battery lasts longer now love it. I sold my galaxy S7 Edge, I felt it was a let down phone for me. Using my honor 8 full time till I get me a better phone. This will always be my go to phone..
Click to expand...
Click to collapse
Which model no. is ur device?
Sent from my Honor 8 using XDA Labs

Guys as nice as this wee chat is I think it's on the wrong thread.
This thread is for ROMs - Recoverys & Kernels
There is a thread for discussion.
You could either ask the mods to move or close this and start it again on the discussion thread.
John

ayush rao said:
Which model no. is ur device?
Click to expand...
Click to collapse
FRD-L04

PeteSeiler2010 said:
FRD-L04
Click to expand...
Click to collapse
I have the same device but haven't recieved the update. They are probably releasing it for few devices at a time.
Sent from my Honor 8 using XDA Labs

ayush rao said:
Which model no. is ur device?
Sent from my Honor 8 using XDA Labs
Click to expand...
Click to collapse
Mines is from the UK FRD-L09.

Meemo23 said:
Mines is from the UK FRD-L09.
Click to expand...
Click to collapse
Oh! I thought it was u who posted that ur device was FRD-L04. Yea probably they'll release it for my model later.
Sent from my Honor 8 using XDA Labs

i have version 360 now.
the phone found new firmware... i download update... reboot phone... but start twrp and not flash this...
have a solution for install 380 version ???
I have tru instal original recovery but not upgrade at 380 version...
Thanks

I hope to receive this update soon.

fabio84 said:
i have version 360 now.
the phone found new firmware... i download update... reboot phone... but start twrp and not flash this...
have a solution for install 380 version ???
I have tru instal original recovery but not upgrade at 380 version...
Thanks
Click to expand...
Click to collapse
I have the same problem. I try using the stock recovery and also stock boot.
img, but in stock recovery an error occurs while checking the update.zip. It always delete the files for the update and after booting the system the update downloaded by the system again. After five tries I don't try it again.
Are there any possibilities to install this update without wiping the whole system?

johnhux7 said:
Guys as nice as this wee chat is I think it's on the wrong thread.
This thread is for ROMs - Recoverys & Kernels
There is a thread for discussion.
You could either ask the mods to move or close this and start it again on the discussion thread.
John
Click to expand...
Click to collapse
With all due respect, there hasn't really been a new ROM since December, Huawei won't release the code so we can take their spyware out.

thekubiaks said:
With all due respect, there hasn't really been a new ROM since December, Huawei won't release the code so we can take their spyware out.
Click to expand...
Click to collapse
Yes mate.
I get what your saying and agree with you.
All I was saying is that there is place for questions and answers.
No biggy, don't effect my life at all.
Just saying

I still have not received this update.. feels like I'm the only one. Am I?

Bakgrund said:
I still have not received this update.. feels like I'm the only one. Am I?
Click to expand...
Click to collapse
No! I.m the same situation.

thanks

Update B360 on B380 without downgrade to MM.
1. Turn on FF and search for updates.
2. Set the proxy to localhost 8080.
3. In FF select B380 OTA-MF (383MB) and do not download only send to updater.
4. Go to system update tab and select the last full package. The system will find a full package with a long name of over 2GB.
5. Select the next find the last full package. Now the system should show the package about 400MB with the normal version name. Do not download!
6. Go to proxy settings and disable them.
7. Go back to the update tab and start downloading.
Should download, update. You have the B380 version.
After a few minutes after the update, the phone is standing on the start screen for a few minutes, waiting patiently.

cotvi said:
Update B360 on B380 without downgrade to MM.
1. Turn on FF and search for updates.
2. Set the proxy to localhost 8080.
3. In FF select B380 OTA-MF (383MB) and do not download only send to updater.
4. Go to system update tab and select the last full package. The system will find a full package with a long name of over 2GB.
5. Select the next find the last full package. Now the system should show the package about 400MB with the normal version name. Do not download!
6. Go to proxy settings and disable them.
7. Go back to the update tab and start downloading.
Should download, update. You have the B380 version.
After a few minutes after the update, the phone is standing on the start screen for a few minutes, waiting patiently.
Click to expand...
Click to collapse
Works as it should ! Thanks !
Sent from my FRD-L09 using XDA-Developers Legacy app