Related
As it was a challenge @rohitsinghpu, here is MY 7th PORTED ROM for Xolo Q3000, with special thanks to:
1) Xolo for the awesome phone at affordable price,
2) MIUI for the wonderful rom,
3) Of course, me for Custom Boot Logo, Re-partitioning (/system - 1gb ) & Porting ROM for Xolo Q3000.
Pre-requisites:
1) Custom recovery such as TWRP, CWM, PhilzTouch(TWRP 2.8.4 rev2 prefered, as I've tested rom using this recovery)
2) Before proceeding, Back up your Current Rom (Failsafe).
3) /System minimum 1gb partition (Repartition your phone, before you flash this ROM).
4) SP Flash Tools & Stock rom (In case, If you are in trouble).
Procedure:
1) Put the downloaded MiUi7_v5.10.15 by Sachin.zip in sd card.
2) Reboot to Recovery using root apps or by pressing (PowerOn + VolumeUp) key combination.
3) If you are on MiUi ROM, Wipe Cache, Dalvik Cache, Android Secure using Advanced Wipe, else perform Full Wipe.
4) Install MiUi7_v5.10.15 by Sachin.zip
5) Wipe Cache & Dalvik Cache & Reboot.
9) Phone will get upgraded to newer version, without losing any data.
10) If u face any problem or want to flash as clean install, then wipe data as well as system, alongwith Dalvik & Cache, before flashing rom.
WARNING:
I WILL NOT BE RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE. EVEN THOUGH, I'VE TESTED & USING IT ON MY DEVICE. TRY AT YOUR OWN RISK.
HOWEVER, I WILL BE AVAILABLE, ALWAYS, TO HELP YOU & SOLVE THE PROBLEMS FACED BY YOU.
Features:
1) Everything from MIUI working fine
2) Latest Google Keybord
3) WSM Tools Pre-Installed
4) SuperUser & BusyBox installed
5) MIUI Video as default media player
6) WiFi Direct working
7) Advanced power menu
8) Custom Boot Logo
9) Full changelog at: http://en.miui.com
Bugs:
Nearly Bugless ROM, few minor bugs are as follows:
1) Some of the Icons missing when using default theme(Change the theme).
2) Report, if you found any.
Note:
For Engineer Mode, dial *#*#3646633#*#*,
Download Links:
1) MiUi7_v5.10.15 Full ROM
All the Best, Guys......
Screenshots:
https://drive.google.com/open?id=0B9c3NsdJ2PscTlE2WVJid2lwX3c
Updates:
If you are using TWRP, Open Updater application or Launch From Settings/About Phone/System updates, from options(top right corner), select Choose Update Package, locate the OTA.zip file. Wait for Updater to finish the job, phone will reboot to recovery & then to updated version.
Also, if you are on twrp or any other recovery, you can update as follows:
reboot to recovery and flash ota.zip, wipe cache & dalvik, reboot.
1) MiUi7_v5.10.15 to 5.10.22_OTA
2) MiUi7_v5.10.22 to 5.10.29_OTA
Bug Fixes:
Great work bro, i ws missing wsm tool as it ws not compatible with roith bro port, it gave fc n random reboot, i tried many wsm version, then fount it ws instability in rom, ( sorry no offense roith bro, u did ur best and im thankfull to u)
Sachin bro, i always look forward to ur work?
Thanks fr making update easyy, downloading now, will review later
sachin.r.fulzele said:
Updates:
Open Updater application or Launch From Settings/About Phone/System updates, from options(top right corner), select Choose Update Package, locate the OTA.zip file. Wait for Updater to finish the job, phone will reboot to recovery & then to updated version.
1) MiUi7_v5.10.15 to 5.10.22_OTA
2) MiUi7_v5.10.22 to 5.10.29_OTA
Click to expand...
Click to collapse
Thanks for the beautiful rom.
Sir when I tried to install ota updates from system updates it is going to recovery and saying installation aborted. Any other way to install these ota updates?
Rom is completely stable bro, theme stays even aftr reebot, all xposed modules working good, no lag, giving good battery backup,
Is there any ideas to port other roms from turkdevs
forum.turkdevs.com/konu-4-4-2-xperia™-z3-v5-1-final-for-gm-discovery.html
forum.turkdevs.com/konu-4-4-2-art-samsung-galaxy-s6-rom-for-gm-discovery.html
forum.turkdevs.com/konu-port-ios-8-ayfone-rom-v1.html
These r the few roms i like to get my hands on bro,
iaditya91 said:
Thanks for the beautiful rom.
Sir when I tried to install ota updates from system updates it is going to recovery and saying installation aborted. Any other way to install these ota updates?
Click to expand...
Click to collapse
U must be on twrp to update in the mentioned way. If u r on any other recovery, flash as a normal zip from recovery.
Jagadish-ravi said:
Rom is completely stable bro, theme stays even aftr reebot, all xposed modules working good, no lag, giving good battery backup,
Is there any ideas to port other roms from turkdevs
forum.turkdevs.com/konu-4-4-2-xperia™-z3-v5-1-final-for-gm-discovery.html
forum.turkdevs.com/konu-4-4-2-art-samsung-galaxy-s6-rom-for-gm-discovery.html
forum.turkdevs.com/konu-port-ios-8-ayfone-rom-v1.html
These r the few roms i like to get my hands on bro,
Click to expand...
Click to collapse
Xperia z3 & galaxy s6 rom will be posted after 9 November, as my exams are running.
sachin.r.fulzele said:
Xperia z3 & galaxy s6 rom will be posted after 9 November, as my exams are running.
Click to expand...
Click to collapse
Awesome bro :thumbup::thumbup:
Does security and cleaner app works fine or still has reboot issues...
Inbuilt browser fc..
THIS PROJECT IS NO LONGER SUPPORTED.
UPDATED 27/04/2017 Content written in RED...... NEW UPDATE 24/3/2018 CONTENT WRITTEN IN BLUE
Stock Firmware Release Android 4.4.2 For Vodafone Smart Tab 4 3G (MT8382)(MT6582)(OT-P323x-2MVDAU2-Unlocked Network)
-Unlocked Firmware (Any Network is usable as far as i know)
-2MDVAU2 Release (Australian - Vodafone)
As Close to Stock as possible with a few extras:
-SuperUser v2.65
-CWM Custom Recovery (for Versions 4.2.2 and 4.4.2)
-TWRP-3.0.0.0 by @jemmini Flashable (Working MTP and more)
-Scatter File for MT8382/MT6582/OT-p323x-2MVDAU2
-included Update.zip from 4.2.2 to 4.4.2
-CyanogenMod 13 Rom Flashable Fully functional AOSP With Gapps package included. -Tested by me
-Ressurection Remix Rom Flashable v5.70 and V5.7.4 Now have fully functional Gapps installed (By Yours truely), Must use TWRP3.0.0.0 and after install and reboot flash NvramFix. and you're good to go -Tested By Me
27/4/2017: New RR5.7.4 With Updated SU, BusyBox, Gapps and DivineBeats9.0. Please note this is a TWRP recovery so replace DATA and SYSTEM into one of your own backup's of RR5.7.4! Let me know if this works for you please and be careful! Make sure you know what you are doing!
24/3/2018: Miui8 Added. Flash and Go as usual. No NVRAM fix needed (at least i didn't need to flash it,you might have to if you get the nvram error in wifi).
-BUG: You have to manually set IP, dont let it do it automatically DHCP is broken in this build
***Please tell me any extra info as i haven't fully tested it out yet***
24/3/2018: Lineage OS (6.0.1): same as always with 6.0.1 aosp builds, Flash, Dont reboot and install nvram fix. then reboot and your good to go. Might need Gapps in this build.
24/3/2018: !!!THE BIG UPDATE TO NOUGAT!!!!
-Resurrection Remix Nougat:
Install as usual, no Nvram fix is needed this time around.
Download and install gapps 7.0.1 pico or what ever version you like.
If you have a SD-card inserted a warning will pop up, if you have files on there remove them before flashing the rom. After you have saved your files format it as internal and you will be good to go.
*ALSO KERNEL SOURCES ARE NOW AVAILABLE*
Install Stock Firmware 4.2.2 using SPFlashTools:
-Make sure you boot into recovery and factory reset before first use!
Install Update from 4.2.2 to 4.4.2:
-Make sure the device is stock! No root or you will encounter errors. Custom recovery works fine, no issues.
-Place Update.zip on root of SD-card or internal if you dont have an SD-card
-Apply Update
-Reboot
Installing Custom Recoveries Using SPFlashTools(Doesnt matter which android you are running 4.2.2 or 4.4.2 they both work for each firmware):
-Install either 4.2.2 or 4.4.2 OR TWRP3.0.0.0
*You might find that if you install 4.4.2 CWM on 4.4.2 firmware the next reboot will cause recovery to revert to stock. To stop this install CWM 4.2.2 (Yes it works), then try to reboot and it will ask you to "stop stock recovery from installing after reboot?" Select yes and dismiss Super user question as you'll get stuck in bootloop.
PLEASE MAKE SURE YOU FACTORY RESET AFTER INSTALLING ANY FIRMWARE! INCLUDING STOCK RELEASE!
Downloads:
You will find all the files here
Credits:
@Chainfire For SU
@benjaminwan -CWM V6 4.2.2
@cofface -CWM v6 4.4.2
*Links are not to be shared without prior consent*
***I'am not responsible for any damage you may cause to your device, Use at your own risk and make sure you know what you're doing!***
Reserved
Links are now live and ready! Removed country lock from firmware so it can be installed on any Vodafone Smart Tab 4 in any country and on any *Service.
*Haven't been able to find a tester.
Hi Valkiry,
when I tried to make the update I got an error. Now when I'm doing a normal start the system hangs on the boot logo.
The error message said:
No file_contextsVerifying current system...
assert failed? apply_patch_check("/custpack/JRD_custres(app/ApplicationsProvider-res.apk", "a6aa8e9828f16678621e20a88221dd44e40ba220", "2990a98b2c09688ce0c01ef5ca1be0aff3d88414")
Installation aborted.
Please continue to update your system !
Any ideas?
lintronics said:
Hi Valkiry,
when I tried to make the update I got an error. Now when I'm doing a normal start the system hangs on the boot logo.
The error message said:
No file_contextsVerifying current system...
assert failed? apply_patch_check("/custpack/JRD_custres(app/ApplicationsProvider-res.apk", "a6aa8e9828f16678621e20a88221dd44e40ba220", "2990a98b2c09688ce0c01ef5ca1be0aff3d88414")
Installation aborted.
Please continue to update your system !
Any ideas?
Click to expand...
Click to collapse
Sorry for the late reply. My wife just had a baby. You need to remove super user before you apply the update. The update wont work with SU. Its batter to do it with stock 100%
Brilliant. Took a bit of trial and error since I've not worked with this tool before but got my tablet updated to 4.4.2 at last. Thanks so much for putting this together, I really thought I'd be stuck on 4.2. Just gotta figure out how to root now, that doesn't seem to be working.
How to find exact model of my Vodafone Smart Tab 4 ?
Can i flash this on my iusacell alcatel pop 8 p320a? I need kitkat
Stock rom is in rar file, i cant select it to install stock rom, it has to be zip file
Any idea would help
Artur1993 said:
Stock rom is in rar file, i cant select it to install stock rom, it has to be zip file
Any idea would help
Click to expand...
Click to collapse
Just change the file extension to Zip
---------- Post added at 03:00 AM ---------- Previous post was at 02:58 AM ----------
Valkiry said:
Sorry for the late reply. My wife just had a baby. You need to remove super user before you apply the update. The update wont work with SU. Its batter to do it with stock 100%
Click to expand...
Click to collapse
Does this allow the Tab to make and receive calls over GSM? Is this unbranded firmware not Vodafone firmware?
You need root access to install custom recovery via adb in fastboot, so you mean get root, install recovery then remove SU before flashing?
Okay so the first dump (4.2.2) is stock firmware from Hungary Vodafone used by mtktools to flash, please not this does not have super user so your device is allowed to update to the 4.4.2 file.
Second file is an update to 4.4.2 for those that missed out on the OTA release because they had root.
Third file is a custom debloated 4.4.2 flashable through CWM.
Never install SU on hungary 4.2.2 firmware as you will never get to upgrade to 4.4.2 firmware.
Updated with new files please check post #1
Gapps on RR v5.7.4 is now fully functional. Enjoy please dont Forget to hit that Thanks button!
New RR 5.7.4 Update:
THIS IS A TWRP RESTORE METHOD!
Replace DATA.* and SYSTEM.* files in one of your own backups of RR5.7.4!
Updated SU to 2.79
Busybox Updated
Gapps Installed
DivineBeats V9 installed
Please note there will be alot of missing apps as i needed to make room in system partition for this. There will be no call functionality, or messaging functionality. Also music player app is gone along with YGPS and Adaway. Let me know how you guys go
Where can I find Resurrection Remix in zip file ? Because there is not in your files (only RR 5.7.4 in rar file).
Where is the Scatter File for MT8382?
Cookiestalker said:
Where is the Scatter File for MT8382?
Click to expand...
Click to collapse
There is no scatter file for MT8382. Vodafone changed it to lock people out of backing up. The original scatter file provided is the real device code. Why are you asking for MT8382?
przenczo said:
Where can I find Resurrection Remix in zip file ? Because there is not in your files (only RR 5.7.4 in rar file).
Click to expand...
Click to collapse
Extract the files and re-ZIP it as a zip file. I made a mistake. It won't affect install
Valkiry said:
UPDATED 27/04/2017 Content written in RED
Stock Firmware Release Android 4.4.2 For Vodafone Smart Tab 4 3G (MT8382)(MT6582)(OT-P323x-2MVDAU2-Unlocked Network)
-Unlocked Firmware (Any Network is usable as far as i know)
-2MDVAU2 Release (Australian - Vodafone)
As Close to Stock as possible with a few extras:
-SuperUser v2.65
-CWM Custom Recovery (for Versions 4.2.2 and 4.4.2)
-TWRP-3.0.0.0 by @jemmini Flashable (Working MTP and more)
-Scatter File for MT8382/MT6582/OT-p323x-2MVDAU2
-included Update.zip from 4.2.2 to 4.4.2
-CyanogenMod 13 Rom Flashable Fully functional AOSP With Gapps package included. -Tested by me
-Ressurection Remix Rom Flashable v5.70 and V5.7.4 Now have fully functional Gapps installed (By Yours truely), Must use TWRP3.0.0.0 and after install and reboot flash NvramFix. and you're good to go -Tested By Me
27/4/2017: New RR5.7.4 With Updated SU, BusyBox, Gapps and DivineBeats9.0. Please note this is a TWRP recovery so replace DATA and SYSTEM into one of your own backup's of RR5.7.4! Let me know if this works for you please and be careful! Make sure you know what you are doing!
Install Stock Firmware 4.2.2 using SPFlashTools:
-Make sure you boot into recovery and factory reset before first use!
Install Update from 4.2.2 to 4.4.2:
-Make sure the device is stock! No root or you will encounter errors. Custom recovery works fine, no issues.
-Place Update.zip on root of SD-card or internal if you dont have an SD-card
-Apply Update
-Reboot
Installing Custom Recoveries Using SPFlashTools(Doesnt matter which android you are running 4.2.2 or 4.4.2 they both work for each firmware):
-Install either 4.2.2 or 4.4.2 OR TWRP3.0.0.0
*You might find that if you install 4.4.2 CWM on 4.4.2 firmware the next reboot will cause recovery to revert to stock. To stop this install CWM 4.2.2 (Yes it works), then try to reboot and it will ask you to "stop stock recovery from installing after reboot?" Select yes and dismiss Super user question as you'll get stuck in bootloop.
PLEASE MAKE SURE YOU FACTORY RESET AFTER INSTALLING ANY FIRMWARE! INCLUDING STOCK RELEASE!
Downloads:
You will find all the files here
Credits:
@Chainfire For SU
@benjaminwan -CWM V6 4.2.2
@cofface -CWM v6 4.4.2
*Links are not to be shared without prior consent*
***I'am not responsible for any damage you may cause to your device, Use at your own risk and make sure you know what you're doing!***
Click to expand...
Click to collapse
I want to thank you. smart tab runs with rr if you get Android 7.1 I would be happy
bussi2010 said:
I want to thank you. smart tab runs with rr if you get Android 7.1 I would be happy
Click to expand...
Click to collapse
Glad I could help you out dude! There is 7.1 floating around but it's not very good and I don't use this device much anymore. If I do end up doing it ill post it here. Don't forget to hit tthat thanks button
Cyanogenmod 12.1 Custom Rom (Unofficial) 100% Bugless
Device Name: Huawei Y3ii LUA-U22, (3G Model)
Chipset: Mt6582,
Kernel: 3.10.72,
Android Version: 5.1
ROM Download Here
___For Preview image click the link beow.-------------
https://drive.google.*com/open?id=1P5chJdDsf2USsLjc8X7r7b8_mB7tIIxM
https://drive.google.*com/open?id=1x0nI4omhIGjcvXwNLFP76nS-hMaCWR03
https://drive.google.*com/open?id=1oQ2ruQEGDETkthz_HHQ9U74zInHkG2t2
https://drive.google.*com/open?id=10Cq3kYKHyNemTank5yaQEHtpmq3UjAVw
https://drive.google.*com/open?id=1QRT29O7dxcIvitwCWiwsNGUc71tgiCSk
------------------------------------------------------------------------------------------------------
++++ For Live Preview Click here
Features Of This Rom:
You can download and flash this rom with any recovery without any error.
-------------------------------------------------------------------------------------------------
It is 100% Bugless Rom
This rom provides you multi boot system
This Rom working for Both Dual Sim & Strong Network Connection.
Long Battery Life
Fast Charging.
Support Audio FX ( That Means Increase You Sound System )
You can record your screen with screencast.
How To Flash This Rom:
1. Wipe Data, cache, Delvik Cache
2. Select Cyanogenmod 12.1 ZIP file from Your SD Card
3. Install The Zip File
4. Flash the GAAps (This time don't wipe anything)
[Note: Download the Gaaps form the link. The gapps should be 5.1 , For all apps select-stock, For few apps select- Nano]
5. Flash the Supersu.zip file beacuse the rom is not pre-rooted.
-------------------------------------------------------------------------------------------------------
[Note: I have Using CTR Recovery For Flashing This Rom]-- If You need the CTR Recovery Then Download Here
-------------------------------------------------------------------------------------------
For More Update please like and share my post. If you face any problem comments below i will answer and solve your problem.
sujon3903 said:
Cyanogenmod 12.1 Custom Rom (Unofficial) 100% Bugless
Device Name: Huawei Y3ii LUA-U22, (3G Model)
Chipset: Mt6582,
Kernel: 3.10.72,
Android Version: 5.1
ROM Download Here
___For Preview image click the link beow.-------------
https://drive.google.*com/open?id=1P5chJdDsf2USsLjc8X7r7b8_mB7tIIxM
https://drive.google.*com/open?id=1x0nI4omhIGjcvXwNLFP76nS-hMaCWR03
https://drive.google.*com/open?id=1oQ2ruQEGDETkthz_HHQ9U74zInHkG2t2
https://drive.google.*com/open?id=10Cq3kYKHyNemTank5yaQEHtpmq3UjAVw
https://drive.google.*com/open?id=1QRT29O7dxcIvitwCWiwsNGUc71tgiCSk
------------------------------------------------------------------------------------------------------
++++ For Live Preview Click here
Features Of This Rom:
You can download and flash this rom with any recovery without any error.
-------------------------------------------------------------------------------------------------
It is 100% Bugless Rom
This rom provides you multi boot system
This Rom working for Both Dual Sim & Strong Network Connection.
Long Battery Life
Fast Charging.
Support Audio FX ( That Means Increase You Sound System )
You can record your screen with screencast.
How To Flash This Rom:
1. Wipe Data, cache, Delvik Cache
2. Select Cyanogenmod 12.1 ZIP file from Your SD Card
3. Install The Zip File
4. Flash the GAAps (This time don't wipe anything)
[Note: Download the Gaaps form the link. The gapps should be 5.1 , For all apps select-stock, For few apps select- Nano]
5. Flash the Supersu.zip file beacuse the rom is not pre-rooted.
-------------------------------------------------------------------------------------------------------
[Note: I have Using CTR Recovery For Flashing This Rom]-- If You need the CTR Recovery Then Download Here
-------------------------------------------------------------------------------------------
For More Update please like and share my post. If you face any problem comments below i will answer and solve your problem.
Click to expand...
Click to collapse
Nice one, Man. If you need some help, I am here.
Does this work on LUA-U23?
DiegoxG said:
Does this work on LUA-U23?
Click to expand...
Click to collapse
This ROM, is developed by dev on android latino org. So you can ask the dev, Does this ROM can be used on U23.
Most of system apps have disappeared, clock bluetooth and others any reasom why ?
viper7144 said:
Most of system apps have disappeared, clock bluetooth and others any reasom why ?
Click to expand...
Click to collapse
Can you give screenshot and logcat?
will this remove huawei apps like huawei backup??
drkpntr said:
will this remove huawei apps like huawei backup??
Click to expand...
Click to collapse
Well, Installing custom ROM will remove official features like cloud storage, device account, system data, and user data.
but is it possible to install them again once a custom rom is applied? because i use huawei back up to save all my data.
drkpntr said:
but is it possible to install them again once a custom rom is applied? because i use huawei back up to save all my data.
Click to expand...
Click to collapse
I think huawei backup will not work properly, because Huawei system use huaweisdk and sync data to account. If you do that, the apps will force close, because Not all custom ROM have same process. Example, you are installing huawei backup, This mean the huawei backup cant work properly(force close) or else. You need a SDK to run huawei system apps. (Like MIUI from Xiaomi)
---------- Post added at 10:50 AM ---------- Previous post was at 10:45 AM ----------
If you want to try please backup your data and system. And Try to install huawei backup. if the apps force close. You can go back to your previous ROM
hi.i got problem to flash CM12.1 UNOFFICIAL LUA-U22.zip.trying to update from sd but suddenly "update abort" appear.maybe got wrong step.should i put on exclusive folder like dload or update or something thx in advance
pojunkampar said:
hi.i got problem to flash CM12.1 UNOFFICIAL LUA-U22.zip.trying to update from sd but suddenly "update abort" appear.maybe got wrong step.should i put on exclusive folder like dload or update or something thx in advance
Click to expand...
Click to collapse
Quick question :
1. Did you install it using Philz or CWM?
2. Did you mean CM12 is ota update?
Reed_405 said:
Quick question :
1. Did you install it using Philz or CWM?
2. Did you mean CM12 is ota update?
Click to expand...
Click to collapse
not really sure ur question .i'm newbie on this.what i do is off my phone and push volume up and power button to enter recovery mode.so there was i clean data and try to flash this zip.so i got problem there while to update from SD.
did i do wrong?should i do flashtool on PC instead?ty for reply :good:
pojunkampar said:
not really sure ur question .i'm newbie on this.what i do is off my phone and push volume up and power button to enter recovery mode.so there was i clean data and try to flash this zip.so i got problem there while to update from SD.
did i do wrong?should i do flashtool on PC instead?ty for reply :good:
Click to expand...
Click to collapse
Before trying to install this ROM, you must follow the order first.
1. Unlock Bootloader
2. Installing Philz/CWM/TWRP
3. Do wipe
4. Install the ROM, SuperSU, and other stuff
5. Reboot system
6. Wait 5-10 minutes
7. Enjoy
Why is my phone stuck on start after flashing the Rom .
Sandip Rai said:
Why is my phone stuck on start after flashing the Rom .
Click to expand...
Click to collapse
Have you follow the instruction?
The link is down.... Anyone please give new download link
aroien said:
The link is down.... Anyone please give new download link
Click to expand...
Click to collapse
Okay, since the owner didnt active to reply this message. So I would like to say that this is like disbanded. If I have time I ll give the link. Please wait.
Link not Working
Link not Working
Download Link.........
Cyanogenmod 12.1 Custom Rom please give me the download link..
Hello, so, my problem is same as title says.
I´ll try to write it as short as possible.
I tried to install Resurrection Remix, Lineage OS, Arrow OS, BootLeggers ( All are unofficial builds for my Redmi 6 ), but everytime I got the constant rebooting bootloop, so I need to go to TWRP and flash Official MIUI ROM
Here are my installation steps for Resurrection Remix ( Pretty same as In this Tutorial ) :
1. - I went to TWRP ( LR. Team TWRP 3.3.1 )
2. - It was showing Internal Storage (0MB), so I click on Wipe - Format Data - yes
3. - After that also Wipe - Advanced Wipe - I selected Dalvik / ART Cache, System, Cache, Data, Vendor
4. - I moved RR Flashable .zip file and Magisk v19.3 from my PC to phones Internal Storage (via USB Cable)
5. - I clicked on Install - RR-P-v7.0.2-20200111-cereus-Unofficial.zip - Add more zips - Magisk-v19.3.zip
6. - After that, I clicked on Wipe cache/dalvik, checked if I´ve got any errors and clicked on Reboot
7. - After that, phone started to restart around every 5 seconds until I went to TWRP and Installed Official MIUI ROM
BONUS. - Tried also on second try to flash MIUI Firmware before RR .zip file, but the results were same.
Also I don´t want Gapps in my phone so i didn´t flash them.
With other ROMs it was same, always bootloop. Here are all .zips, links to forums, tutorials that I followed.
So please message me what´s the issue, especially while installing Resurrection Remix, because this is the ROM that I would like to install the most.
I know it's too late for reply I'm just posting this so that others (like myself) can see this. Lets keep the community for this phone alive!
Install MIUI V10.4.4.0 (I found that this version works for me), Disable DM verity (https://forum.xda-developers.com/t/...ncrypt-disk-quota-disabler-11-2-2020.3817389/) and finally wipe data and install your custom rom.
It will bootloop on the first boot so wait a few seconds then force reboot
I've seen several posts that upgrading to Android 11 is causing serious issues with twrp and root. I have an update dated 01/21 that is ready to install and I'd like to know if I can install it and still keep twrp and root. I'm on stock model gm1925 build 10.0.9.gm27ba and as stated, keeping root is important for me.
Bump
scuzzo500 said:
I've seen several posts that upgrading to Android 11 is causing serious issues with twrp and root. I have an update dated 01/21 that is ready to install and I'd like to know if I can install it and still keep twrp and root. I'm on stock model gm1925 build 10.0.9.gm27ba and as stated, keeping root is important for me.
Click to expand...
Click to collapse
You are on stable channel surely the notified upgrade is to version 10.0.11, so you can update and keep root and twrp working.
To do this follow the steps described by @strongst in the op7 forum and you will have no problems.
Here the steps to follow:
Optional but highly recommended, backup everything in case of issues.
Download the full rom zip file and the twrp zip installer file and place it into the phone storage memory.
Go to Magisk Manager and uninstall all modules.
Reboot phone.
Go to Android settings -> system -> system update and hit gear icon top right -> local upgrade, select the .zip file of the new firmware and wait for the installation to finish. Attention don't reboot yet!
Install TWRP within Magisk Manager App like a Module: Magisk Manager App -> Menu -> Modules "+" select .zip file of the twrp recovery installer. Attention don't reboot yet!
Install Magisk via Magisk Manager App again: Magisk Manager App -> hit install after your Magisk version -> hit again install -> hit "install to inactive slot".
Finally reboot.
Reinstall your Magisk Modules.
Done! Your device is now updated and you keep TWRP and root.
Very important: At the moment this procedure is to be considered reliable only if used with firmware based on Android 10.
scuzzo500 said:
I've seen several posts that upgrading to Android 11 is causing serious issues with twrp and root. I have an update dated 01/21 that is ready to install and I'd like to know if I can install it and still keep twrp and root. I'm on stock model gm1925 build 10.0.9.gm27ba and as stated, keeping root is important for me.
Click to expand...
Click to collapse
As of right now there is no TWRP working some have had luck but unfortunately most havent. i have uploaded a patched boot.img that will let you root
how to install android 11 on gm 1925, if my phone does not see files via local update?????