Related
master and mister who expert with android. please help me......
my sxl is hardbrick and totally death plese tell me what i can do to fix.....
egisetiyo said:
master and mister who expert with android. please help me......
my sxl is hardbrick and totally death plese tell me what i can do to fix.....
Click to expand...
Click to collapse
You need to provide full details what is happening. Does it switch on? Do you see a flicker when you turn on or what happened and every single bit of detail you think can be helpful. How do you know it's hardbrick. Do you know the difference between soft and hard brick?
Asking a question without details is not going to help. Ask again in details!
help
Hnk1 said:
You need to provide full details what is happening. Does it switch on? Do you see a flicker when you turn on or what happened and every single bit of detail you think can be helpful. How do you know it's hardbrick. Do you know the difference between soft and hard brick?
Asking a question without details is not going to help. Ask again in details!
Click to expand...
Click to collapse
my phone is off totally cant turn on when i push the button power. this hapen after i root my phone. when i charge my sxl, the light indictor is not turn on. sory with my bad english language master and please help me
anyone plese help me
Try Flashing firmware again using flashtool or SUS?
Try to remove the battery for about 10 minutes ,,it should fix the problem
master n mister, i had try all but the problem i cant acses my sxl when i want to flash with flashtool in pc. my sxl is not recgnze. that any trick who can fix this problem? plis share n help me
Do one thing.. Remove Battery, press power button for around 10-12 seconds.. Insert the battery and try to flash again using flashtool..
saurabh007 said:
Do one thing.. Remove Battery, press power button for around 10-12 seconds.. Insert the battery and try to flash again using flashtool..
Click to expand...
Click to collapse
thx u brother saurabh007, but the trick is still not succses. if i use usb jig are working sony?
once again thnx 4 u help i very apriciade
egisetiyo said:
thx u brother saurabh007, but the trick is still not succses. if i use usb jig are working sony?
once again thnx 4 u help i very apriciade
Click to expand...
Click to collapse
Are you sure that you got battery? Can you get same battery from some friend and try to power on your phone?
egisetiyo said:
my phone is off totally cant turn on when i push the button power. this hapen after i root my phone. when i charge my sxl, the light indictor is not turn on. sory with my bad english language master and please help me
Click to expand...
Click to collapse
egisetiyo said:
anyone plese help me
Click to expand...
Click to collapse
egisetiyo said:
master n mister, i had try all but the problem i cant acses my sxl when i want to flash with flashtool in pc. my sxl is not recgnze. that any trick who can fix this problem? plis share n help me
Click to expand...
Click to collapse
egisetiyo said:
thx u brother saurabh007, but the trick is still not succses. if i use usb jig are working sony?
once again thnx 4 u help i very apriciade
Click to expand...
Click to collapse
We can NOT help you until you provide specific details.
Answer these questions :
1.Do you have any idea about how to flash a ROM and how much experience & understanding you have of android?
2.What were you doing when your phone suddenly died?
3.Were you trying to change values of your ROM/kernel or trying to do a mod?
4.Tell me in details how your phone is behaving apart from your term DEAD. When you try to switch on, do you see flickering/ a dull black screen or nothing happens or do you see any slight light in dark.
5.Does it boot into flashmode/fastboot if you try?
6.Have you tried to charge it for few hours and left it there?
7.Are you sure it is NOT battery problem?
8. Did you drop it in any kind of liquid or anything.
9. What do you mean by root here. Your phone died DURING root, AFTER root or what?
I only asked 9 questions but your details must be equal to 20 questions if you are willing to fix your phone as we CAN NOT SHOOT STARS on a CLEAR SUNNY SKY.
siankatabg said:
Are you sure that you got battery? Can you get same battery from some friend and try to power on your phone?
Click to expand...
Click to collapse
yes off course. ok i will try brother
egisetiyo said:
yes off course. ok i will try brother
Click to expand...
Click to collapse
Can you just tell by which method did you root your device?
egisetiyo said:
master and mister who expert with android. please help me......
my sxl is hardbrick and totally death plese tell me what i can do to fix.....
Click to expand...
Click to collapse
just send the phone to the service centre,it is the easiest way
My Xperia L is not turning on
faizur1999 said:
just send the phone to the service centre,it is the easiest way
Click to expand...
Click to collapse
Thank you for the valuable details that have been provided. I am experiencing the same problem with my Xperia L. For Xperia L as per my understanding to get CWM you need custom Kernal and before installing this I was trying to root and unlock bootlader to get custom ROM installled. I am below average user had some experience in flashing and but I did something wrong the phone is totally dead now. Now I am trying to turn it on and go into recovery by using volume button and power button but just red light is blinking no Sony logo. I also try to connect this with PC but it recognized as unknown device. I also tried Sony SUS but PC is not recognizing the phone which I guess is required for SUS and flash tool. Please help me!
egisetiyo said:
yes off course. ok i will try brother
Click to expand...
Click to collapse
Is your sxl showing red led when you connect it to the charger..
If it showing the red led let it charge untill it turns green.
Then try to switch it on..
perivenkal said:
Thank you for the valuable details that have been provided. I am experiencing the same problem with my Xperia L. For Xperia L as per my understanding to get CWM you need custom Kernal and before installing this I was trying to root and unlock bootlader to get custom ROM installled. I am below average user had some experience in flashing and but I did something wrong the phone is totally dead now. Now I am trying to turn it on and go into recovery by using volume button and power button but just red light is blinking no Sony logo. I also try to connect this with PC but it recognized as unknown device. I also tried Sony SUS but PC is not recognizing the phone which I guess is required for SUS and flash tool. Please help me!
Click to expand...
Click to collapse
Try removing your battery for 5 minutes. Then try again and let us know how it goes. Your phone is not bricked, it can be salvaged, question is only if you need to send it in to repair. But first thing first, try removing battery and then come back.
Still Xperia L is not turning on, just giving three red light blinks
Redzo said:
Try removing your battery for 5 minutes. Then try again and let us know how it goes. Your phone is not bricked, it can be salvaged, question is only if you need to send it in to repair. But first thing first, try removing battery and then come back.
Click to expand...
Click to collapse
Thank you Redzo for your kind reply. I did the same but again the red light blinks three times but phone is not turning on and no Sony logo. Still it’s recognized as unknown device by the PC and just also tried on other pc but no luck. Got generic ftt to flash but the phone is still not being recognized by Sony flasher and SUS. Here in Pakistan there is no Sony service centres and I don’t want to give to local vendors. Please advise what should I do more
saurabh007 said:
Do one thing.. Remove Battery, press power button for around 10-12 seconds.. Insert the battery and try to flash again using flashtool..
Click to expand...
Click to collapse
Many many thanks to you Saurabh007.. I thought I've lost my phone but after reading your valuable and helpful words, I get it back, smiling face comes to me again..wow.. thank you so much..
FPThatea said:
Many many thanks to you Saurabh007.. I thought I've lost my phone but after reading your valuable and helpful words, I get it back, smiling face comes to me again..wow.. thank you so much..
Click to expand...
Click to collapse
My pleasure!
Sent from my C2104 using Tapatalk
So guys,
After some ports, my XC2304 isn't able to run on flashmode to re-install firmware. Some days ago I create an ftf file for it be flashed by Perfect Flash, the results was sucessfully. Perharps, today I was porting a Z1 rom based on our last update .13. After install the rom by CMW the phone doesn't boot for anyway.
I tryed to reset by back button, no response;
I tryed to remove battery and no response;
I've tryed to boot into flash mode by pressing volume - but only stills on a red led.
I follow some tutorials but no one worked for me, the main problem is "device not recognized" by windows.
Can't connect on Perfect Flash\Sony Update service cause the flash mode doesn't appears.
Well, I was very excited to porting my new rom based on 4.3 AOSP, was some little bugs that I as just solving, but now I'm not able to continue my ports
If someone had the SAME problem and solved it, I'll be glad if you help me!
Best Regards.
sid_reis said:
So guys,
After some ports, my XC2304 isn't able to run on flashmode to re-install firmware. Some days ago I create an ftf file for it be flashed by Perfect Flash, the results was sucessfully. Perharps, today I was porting a Z1 rom based on our last update .13. After install the rom by CMW the phone doesn't boot for anyway.
I tryed to reset by back button, no response;
I tryed to remove battery and no response;
I've tryed to boot into flash mode by pressing volume - but only stills on a red led.
I follow some tutorials but no one worked for me, the main problem is "device not recognized" by windows.
Can't connect on Perfect Flash\Sony Update service cause the flash mode doesn't appears.
Well, I was very excited to porting my new rom based on 4.3 AOSP, was some little bugs that I as just solving, but now I'm not able to continue my ports
If someone had the SAME problem and solved it, I'll be glad if you help me!
Best Regards.
Click to expand...
Click to collapse
I did the same thing like you and had same issue.
Unfortunately, we cant use Flashtool/ SUS/ Perfect Flash to unbrick because there have no driver for our xc.
So, I sent back to SONY yesterday.
Fix your problem using this way
sid_reis said:
So guys,
After some ports, my XC2304 isn't able to run on flashmode to re-install firmware. Some days ago I create an ftf file for it be flashed by Perfect Flash, the results was sucessfully. Perharps, today I was porting a Z1 rom based on our last update .13. After install the rom by CMW the phone doesn't boot for anyway.
I tryed to reset by back button, no response;
I tryed to remove battery and no response;
I've tryed to boot into flash mode by pressing volume - but only stills on a red led.
I follow some tutorials but no one worked for me, the main problem is "device not recognized" by windows.
Can't connect on Perfect Flash\Sony Update service cause the flash mode doesn't appears.
Well, I was very excited to porting my new rom based on 4.3 AOSP, was some little bugs that I as just solving, but now I'm not able to continue my ports
If someone had the SAME problem and solved it, I'll be glad if you help me!
Best Regards.
Click to expand...
Click to collapse
I had the same problem some time ago but that can be fixed using
" Sony Update Services "....
For all step wise guide read my post and if you find it usefull... click that thanks please...
http://forum.xda-developers.com/sony-xperia-c/general/how-to-install-restore-stock-android-t2832005
Do this before the above link :
remove your back panel and then put your Xperia C for charging and then hit the small reset button near Sim card slot using a pen or a refill; then wait for 5 resonds and stop charging... by this you will be able to switch off your Xperia C and then you can use the link provided above to for your problem
iSiddharth said:
I had the same problem some time ago but that can be fixed using
" Sony Update Services "....
For all step wise guide read my post and if you find it usefull... click that thanks please...
http://forum.xda-developers.com/sony-xperia-c/general/how-to-install-restore-stock-android-t2832005
Do this before the above link :
remove your back panel and then put your Xperia C for charging and then hit the small reset button near Sim card slot using a pen or a refill; then wait for 5 resonds and stop charging... by this you will be able to switch off your Xperia C and then you can use the link provided above to for your problem
Click to expand...
Click to collapse
this method doesnt work when you flash a rom for a different device like i did i already order a new motherboard for my xc. this only will solve it...changing motherboard.
And by the way if Red Light is shown then it is Soft Brick and you can very easily repair it. If that light is also not there then you can say that it is a hard brick.
my xperia L c2104 is death , but no for so long i guess , an cyanogenmod 12.1 crash kill him , the phone cant turn on ,cant enter to flashmode and fastmode, when i connect the usb to the computer it appears but like this QHSUSB_DLOAD thats the Boot Repair mode
but i cant find the boot of c2104 on internet to repair the boot, if someone can help me ,really thanks , many people falls in this HardBrick :C
yup this means hardbrick, at this moment no way how to fix this only replacing motherboard
files we need to revice our device have only qualcomm
How the **** did that happen?
same situation, but mine still able to open flashmode, fastboot, and recovery. but after trying to fix things by my self (since no help came, and no luck searching forum), well, finally my xperia l rest in peace 2 days ago. mine have problem with superblock btw.
keep strong my friend, maybe it's time to move up to updated phone.
time_san said:
same situation, but mine still able to open flashmode, fastboot, and recovery. but after trying to fix things by my self (since no help came, and no luck searching forum), well, finally my xperia l rest in peace 2 days ago. mine have problem with superblock btw.
keep strong my friend, maybe it's time to move up to updated phone.
Click to expand...
Click to collapse
you can reach flashmode and recovery?
well then you could boot from external sd
Sent from my Xperia T using XDA Free mobile app
[ROM][6.0] CyanogenMod 13.0 [ALPHA] have bricked some XPERIA L devices. So this thread is to help those people who are facing the problem. I came across some methods to recover their Xperia L. Although, I am not sure it will work because I haven't tried it myself (Can't risk bricking my phone on purpose just to check this method which may or may not fix it ). But please go ahead and try it.
It's better to try than to cry!
Click to expand...
Click to collapse
METHOD 1
Remove Battery, press power button for around 10-12 seconds..then press and hold volume up, a Insert the battery , fash tft file using flastool
Source: https://www.youtube.com/watch?v=lycyxdkNlz8 (Comment by KãyRá S.s)
METHOD 2
Disconnect the phone from PC if connected Remove the battery Press and hold the power button for 15-20 seconds Re-insert battery Flash latest FW using flashtool..
Source: https://www.youtube.com/watch?v=lycyxdkNlz8 (Comment by BEST FULLAPPS)
If anyone know a better method or a suggestion please post it...
you can't fix in any way broken partition table, only with jtag and similiar, this all should work for semibricked devices...
Hard Brick......
Flashing_Expert said:
you can't fix in any way broken partition table, only with jtag and similiar, this all should work for semibricked devices...
Click to expand...
Click to collapse
Sir plz help me out i have bricked my device. When i connect it to a charger it shows a greenish light for a second and the it fades out. No detection my pc. It says that it is an unidentified device. actually it happened after i flashed cm13 by olivier. It booted up fine. I then just shut it down to install gapps. But it didnt respond any more.
udaykapoor97 said:
Sir plz help me out i have bricked my device. When i connect it to a charger it shows a greenish light for a second and the it fades out. No detection my pc. It says that it is an unidentified device. actually it happened after i flashed cm13 by olivier. It booted up fine. I then just shut it down to install gapps. But it didnt respond any more.
Click to expand...
Click to collapse
You had to install the latest package.. if u didn't only then u would've got hard bricked... cm13 is now tested by too many people and it runs without bugs.. so it may be the fault with the version of cm13 you used..
udaykapoor97 said:
Sir plz help me out i have bricked my device. When i connect it to a charger it shows a greenish light for a second and the it fades out. No detection my pc. It says that it is an unidentified device. actually it happened after i flashed cm13 by olivier. It booted up fine. I then just shut it down to install gapps. But it didnt respond any more.
Click to expand...
Click to collapse
oh damn another one guy same happened to me with same rom ...
sorry but this means your phone is dead like mine, your bootloader is corrupted so device is unable to boot to kernel nor to system
no flashmode or fastboot mode, you can see it only in device manager (with proper drivers) as qhusb dload 9008
sadly we don't have proper files for QPST software so nobody unbricked his XL to this date
only chance is motherboard replacement
udaykapoor97 said:
Sir plz help me out i have bricked my device. When i connect it to a charger it shows a greenish light for a second and the it fades out. No detection my pc. It says that it is an unidentified device. actually it happened after i flashed cm13 by olivier. It booted up fine. I then just shut it down to install gapps. But it didnt respond any more.
Click to expand...
Click to collapse
btw you had 2 partitions on your microsd? I need to know...
Hi, is it possible to have some more information on the situations with cm13 that have caused a hard-brick? I understood that that the features such as link2sd and app2sd are potentially dangerous? Is this understanding correct? If yes, could you please explain why and under which circumstances this could create troubles?
Do you have any further suggestions on what to avoid?
Many thanks in advance for your expert advice.
I wanted to try cm13 on my spare xperia l, but would like to avoid a hard brick...
Cheers,
Hennng
xleng said:
Hi, is it possible to have some more information on the situations with cm13 that have caused a hard-brick? I understood that that the features such as link2sd and app2sd are potentially dangerous? Is this understanding correct? If yes, could you please explain why and under which circumstances this could create troubles?
Do you have any further suggestions on what to avoid?
Many thanks in advance for your expert advice.
I wanted to try cm13 on my spare xperia l, but would like to avoid a hard brick...
Cheers,
Hennng
Click to expand...
Click to collapse
Its already been fixed in newer builds, also, the developer has stopped the development. But you can surely use CM13 Based ROMs since they also have better editing options.
I really cant wait for cm13. It really pleases me If rom get fixes
Hey guys
I was busy with rooting my xperia 5, everything worked but then i de-installed systemapps like carrier services and facebook,google apps. and the next thing it hang in boot up with only sony on screen??
Plz how can i recover the software, i tried sony companion with fastboot mode but because the bootloader is unlocked its redirected me to developer site on sony. also the 'emma tool' wouldn start for this phone ?
Can someone give me advice. i have no phone now and i had it new !!
may god be with u guys
casaaaoui said:
Hey guys
I was busy with rooting my xperia 5, everything worked but then i de-installed systemapps like carrier services and facebook,google apps. and the next thing it hang in boot up with only sony on screen??
Plz how can i recover the software, i tried sony companion with fastboot mode but because the bootloader is unlocked its redirected me to developer site on sony. also the 'emma tool' wouldn start for this phone ?
Can someone give me advice. i have no phone now and i had it new !!
may god be with u guys
Click to expand...
Click to collapse
did you try xperia flashtool yet you can flash the firmware from the program, but first you need xperifirm to download the necessary firmware for your device model, then create a bundle from xperia flashtool, finally flash the created firmware via flashmode.
casaaaoui said:
Hey guys
I was busy with rooting my xperia 5, everything worked but then i de-installed systemapps like carrier services and facebook,google apps. and the next thing it hang in boot up with only sony on screen??
Plz how can i recover the software, i tried sony companion with fastboot mode but because the bootloader is unlocked its redirected me to developer site on sony. also the 'emma tool' wouldn start for this phone ?
Can someone give me advice. i have no phone now and i had it new !!
may god be with u guys
Click to expand...
Click to collapse
Emma should work, it's for UB devices
Edit: if it doesn't, use Flashtool as aforementioned
When I do the volume down for flashing mode emma dont read the phone, something with a another version ?
casaaaoui said:
When I do the volume down for flashing mode emma dont read the phone, something with a another version ?
Click to expand...
Click to collapse
please try my advice
nolihowell said:
please try my advice
Click to expand...
Click to collapse
What is ur advice ?
Edit, I see ur advice im gonna try and let u know. Thank u!
casaaaoui said:
What is ur advice ?
Edit, I see ur advice im gonna try and let u know. Thank u!
Click to expand...
Click to collapse
yes please do let me know if it works.
@casaaaoui
Official tools (emma, xperia companion) are useless once bootloader is unlocked
I've been able to fix similar issue using newflasher (even though Xperia 5 is not officially supported):
- download firmware for your device model using xperifirm
- remove all .ta files (incl. those in subfolders)
- extract newflasher files to the same directory where firmware files are stored (appslog_X-FLASH-ALL-A2CD.sin, bluetooth_X-FLASH-ALL-A2CD.sin, .... newflasher.exe ... )
- connect device in flash mode - turn it off (in case of boot loops press and hold combo "volume up" + "power button" and wait till phone vibrates 3 times), after that press and hold "volume down" and connect phone to the PC (once led became green you can release "volume down" button)
- verify there's no driver issue in Device Manager
- run newflasher.exe, answer n (no) to all questions
- wait for "End. You can disconnect your device when you close newflasher", press enter and unplug your phone
xperifirm: https://forum.xda-developers.com/crossdevice-dev/sony/pc-xperifirm-xperia-firmware-downloader-t2834142
newflasher: https://forum.xda-developers.com/crossdevice-dev/sony/progress-newflasher-xperia-command-line-t3619426
Good luck
Is this working in xperia 5 901SO ??? I have tried this as u said!! But its bricked my phone hardly!!