Help! No service after XtreStoLite ROM install. - Galaxy S6 Q&A, Help & Troubleshooting

I have a sprint s6 and just installed XtreStoLite. I used TWRP custom recovery. All worked fine except I don't have cell service. It was switched off by default and when I turn it on I get the message "Insert SIM card to access network services"
I tried restarting my phone and removing and replacing the sim card. I also tried inserting an old verzion sim card I had laying around but no luck their. Am I missing something or what is the problem here?

I'm trying to flash my stock rom back but nothing is working!!!
I'm installing with odin and I get this error message:
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Why?!??!?! I am beyond frustrated someone please help

Which kernel have you flashed?

Maybe you mess with the efs folder. Try restoring a backup or restore the efs if u have a backup of it

salehin4070 said:
Which kernel have you flashed?
Click to expand...
Click to collapse
I didn't flash a kernel originally so I guess that means I had the stock kernel. I flashed UniKernel V9 but still no luck with cell service or flashing stock rom.
Kernel I installed > http://forum.xda-developers.com/sprint-galaxy-s6/development/kernel-unikernel-v5-t3166295

Nevermind. Installed renegade and it works.

gunnerrrrr said:
Nevermind. Installed renegade and it works.
Click to expand...
Click to collapse
can you please post a link to a solution for others that have same issue?
Thx

brenner650 said:
can you please post a link to a solution for others that have same issue?
Thx
Click to expand...
Click to collapse
I would like to know too mine stuck on emergency calls only

brenner650 said:
can you please post a link to a solution for others that have same issue?
Thx
Click to expand...
Click to collapse
I installed a different rom. XtreStoLite is not compatible with G920P but I tried it anyways. I installed Renegade as I'm having issues installing the stock rom, and cell data works normal again. If you're looking for a light rom, go with Twisted. Also works for me.

I am having similar issue on G920F, no SIM, Insert SIM card to access network services, restarts on inserting/removal od SIM, no mobile networks menu. I can use Smart switch, had xtrestolite, can flash official and unofficial roms, but it stays the same. everything else works fine (wifi, camera, etc.).
Topic here:
http://forum.xda-developers.com/galaxy-s6/help/g920f-network-issues-t3291903#post64814110

Related

Urgent Help Needed - Softbricked the phone! :(

Ok, so get this. I followed the procedure from the sticky thread on how to flash, and Odin failed at flashing the firmware step. Don't know how. It just failed saying connection error.
Now, starting the phone gives a black screen which keeps on going like forever.
I tried to reflash, and same error at exact same step. So, I repackaged that tar file, and again flashed it, and Odin said Pass. I thought, it worked, but when powering up the system, still same issue. Just a freaking black screen.
So, now, I am confused as to what I missed?
try to flash your firmware again with latona 1st.. then flash your desired firmware.
Sent from my GT-I9003 using xda premium
I have only one folder, which is I guess for Phone files only. So, if I use PIT, won't it create problems later?
Anyways, anything is better than nothing. Will try to use latona.pit before flashing. Downloading a new firmware too, just to make sure firmware is not corrupt.
BTW, this is the exact log from ODin, if it helps.
<ID:0/007> Now Writing.. Please wait about 2 minutes
<ID:0/007> Receive Response form LOKE
<ID:0/007> Sbl.bin
<ID:0/007> Transmission Complete..
<ID:0/007> Now Writing.. Please wait about 2 minutes
<ID:0/007> Receive Response form LOKE
<ID:0/007> param.lfs
<ID:0/007> Transmission Complete..
<ID:0/007> Now Writing.. Please wait about 2 minutes
<ID:0/007> Receive Response form LOKE
<ID:0/007> normalboot.img
<ID:0/007> Transmission Complete..
<ID:0/007> Now Writing.. Please wait about 2 minutes
<ID:0/007> Receive Response form LOKE
<ID:0/007> system.rfs
<ID:0/007> Transmission Complete..
<ID:0/007> Now Writing.. Please wait about 2 minutes
<ID:0/007>
<ID:0/007> Receive Response form LOKE
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
New update. Turns out, I was wrong. That one tar file was supposed to go for PDA, and not phone. Stupid Me.
Anywho, I downloaded a stock firmware with all the three packages, and flashing with that. It worked. Now, trying to flash the new firmware again. Lets hope, it works too.
Nice br'o, welcome to xda community .
Ok, so that new package is seriously bonkers. Why the hell is modem.bin added with rest of PDA files. But, phone works now, and the firmware is installed. So, lets forget it. First galaxy sl f/w update successful.
Mods, plz close the thread.
seizmos said:
Nice br'o, welcome to xda community .
Click to expand...
Click to collapse
Been lurking around quite some time ago, but anyways, thanks.
jitendragarg said:
Ok, so get this. I followed the procedure from the sticky thread on how to flash, and Odin failed at flashing the firmware step. Don't know how. It just failed saying connection error.
Now, starting the phone gives a black screen which keeps on going like forever.
I tried to reflash, and same error at exact same step. So, I repackaged that tar file, and again flashed it, and Odin said Pass. I thought, it worked, but when powering up the system, still same issue. Just a freaking black screen.
So, now, I am confused as to what I missed?
Click to expand...
Click to collapse
repacked? what did you unpack anyway.flash latona,restart download mode then flash xxkpe files with bootloader,restart download mod flash xxkph file as pda(no unpacking)
edit:nvm didnt refresh page didnt see you solved your problem

phone has no data and will not complete an odin flash

So basicallly yesterday i tried rooting my sgs4g. I read the bible and the noob flash guide but some how i still messed up. Using super one click i was able to root the phone without any problems. I hooked the phone up to odin 1.7 and tried flashing one of the stock roms recommended in the noob guide to flashing but odin would not finish the flashing sequence and only states that the complete write operation failed. I was freaking out after about four hours and was literally trying tons of .tar files ive tried two from whitehawx off here the two from the noob guide aand no dice i dont know. i know the phone is in download mode i got that down yesterday lol but i still can not complete the flash. I have both 32 and 64 bit drivers installed on my computer but i cannot complete any type of flash. I can turn the phone on but it has no data and vibrates almost every ten seconds. It does say its still on 2.21 but baseband is unknown and kernal is stock i believe. i can pull the number when i get home. I am lost at this point im just tryilng to get back to stock or anything that makes the phone usable again. thanks in advance to any one who helps i wil donate...lol
alberto7939 said:
So basicallly yesterday i tried rooting my sgs4g. I read the bible and the noob flash guide but some how i still messed up. Using super one click i was able to root the phone without any problems. I hooked the phone up to odin 1.7 and tried flashing one of the stock roms recommended in the noob guide to flashing but odin would not finish the flashing sequence and only states that the complete write operation failed. I was freaking out after about four hours and was literally trying tons of .tar files ive tried two from whitehawx off here the two from the noob guide aand no dice i dont know. i know the phone is in download mode i got that down yesterday lol but i still can not complete the flash. I have both 32 and 64 bit drivers installed on my computer but i cannot complete any type of flash. I can turn the phone on but it has no data and vibrates almost every ten seconds. It does say its still on 2.21 but baseband is unknown and kernal is stock i believe. i can pull the number when i get home. I am lost at this point im just tryilng to get back to stock or anything that makes the phone usable again. thanks in advance to any one who helps i wil donate...lol
Click to expand...
Click to collapse
Start with the basics - a factory data reset. See if that helps.
Also, you should not have/need both 32-bit & 64-bit drivers on your PC. That potentially is a conflict within itself. What operating system are you on? If it's 32-bit, only have those drivers. If it's 64-bit, only use those. I'd uninstall them both and then reinstall a clean set based on your OS.
Look for ODIN 1.85. It's out here somewhere. I've had more luck with it than 1.7.
Let me know how things go with this. If you're not working after trying to go this route let us know and we'll push forward.
alberto7939 said:
So basicallly yesterday i tried rooting my sgs4g. I read the bible and the noob flash guide but some how i still messed up. Using super one click i was able to root the phone without any problems. I hooked the phone up to odin 1.7 and tried flashing one of the stock roms recommended in the noob guide to flashing but odin would not finish the flashing sequence and only states that the complete write operation failed. I was freaking out after about four hours and was literally trying tons of .tar files ive tried two from whitehawx off here the two from the noob guide aand no dice i dont know. i know the phone is in download mode i got that down yesterday lol but i still can not complete the flash. I have both 32 and 64 bit drivers installed on my computer but i cannot complete any type of flash. I can turn the phone on but it has no data and vibrates almost every ten seconds. It does say its still on 2.21 but baseband is unknown and kernal is stock i believe. i can pull the number when i get home. I am lost at this point im just tryilng to get back to stock or anything that makes the phone usable again. thanks in advance to any one who helps i wil donate...lol
Click to expand...
Click to collapse
Do you have multiple USB ports on your computer? Make sure you are plugged into one that goes directly to the CPU motherboard - one on the back. I have had issues trying to flash through USB ports that are on the front of a computer. Odin will recognize your phone, but it will freeze during flash. Just something to check.
I'm on windows 7. I have tried every usb on the laptop lol i've had a long time to try it out. So since I'm on windows 7 I should delete the 32 bit right? Thank both of you guys I'm on my way as we speak to fire up the laptop. I'll delete the drivers and search for the newer version of odin. Thank you guys again
alberto7939 said:
I'm on windows 7. I have tried every usb on the laptop lol i've had a long time to try it out. So since I'm on windows 7 I should delete the 32 bit right? Thank both of you guys I'm on my way as we speak to fire up the laptop. I'll delete the drivers and search for the newer version of odin. Thank you guys again
Click to expand...
Click to collapse
Not necessarily. Win7 can be either 32 or 64-bit. If you're not sure, right-click on your Computer/My Computer icon, and go to Properties. I believe it tells you there. I don't have a Win7 PC in front of me so I can't be 100%.
ok i am on 64bit windows.i deleted everything i downloaded yesterday so im starting from complete scratch i also downloaded odin 1.85. I am going to try to flash the .tar that is listed in the noob guide to oden from krylon 360 [ROM-ODIN]T959VUVKB5.
alberto7939 said:
ok i am on 64bit windows.i deleted everything i downloaded yesterday so im starting from complete scratch i also downloaded odin 1.85. I am going to try to flash the .tar that is listed in the noob guide to oden from krylon 360 [ROM-ODIN]T959VUVKB5.
Click to expand...
Click to collapse
Cool, let me know how it goes
do i have to change anything with the .pit file? im barely going to try the downloads from multiupload are taking really long lol
alberto7939 said:
do i have to change anything with the .pit file? im barely going to try the downloads from multiupload are taking really long lol
Click to expand...
Click to collapse
I haven't looked at the KB5 ROM. Does it come with multiple files (pit, pda, csc, phone)? If so, all you should have to do is put the files in the right slots in ODIN, don't mess with the check boxes, and flash it.
<ID:0/015> Added!!
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> factoryfs.rfs
<ID:0/015> NAND Write Start!!
<ID:0/015> cache.rfs
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
same thing:/
alberto7939 said:
<ID:0/015> Added!!
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> factoryfs.rfs
<ID:0/015> NAND Write Start!!
<ID:0/015> cache.rfs
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
same thing:/
Click to expand...
Click to collapse
Are you getting the phone into download mode?
i was...after that now i have the phone---!----computer logo. odin still reads it but that flash it had the yellow triangle with android inside it
i just tried again but
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> factoryfs.rfs
<ID:0/015> NAND Write Start!!
<ID:0/015> cache.rfs
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What files are you using and where are you putting them?
Sent from my SGH-T959V using xda premium
I've never used KB5 before. What if you were to try something a bit more updated?
If you want to stay Froyo you can grab the stock KD1 from:
http://hotfile.com/dl/120929051/0ea3e13/T959VUVKD1.rar.html
IF you want to go Gingerbread, you can grab chadster's KG4 from:
http://forum.xda-developers.com/showthread.php?t=1183413
Like Exodian alluded to, you have to make sure you have the files in the right places. Let us know what you're doing. If you can snag a screen shot of ODIN and post it, that might help too.
T959VKB5-Custom (1) in the pda file
k i am downloading both
Yeah kg4 is better than froyo. Well, wifi excluded. Just make sure the files are in the correct spot.
Sent from my SGH-T959V using xda premium
alberto7939 said:
k i am downloading the kg4.
Click to expand...
Click to collapse
Cool. That was the first Gingerbread leak that came with the right boot loaders. What you're going to want to do is:
- Put CODE_T959VUVKG4_CL1385158_REV00_user_low_noship.tar.md5 into PDA
- Put hawk_Sidekick_VibrantPlus_831.pit into PIT
- Put SGH-T959V-CSC-TMB-VIBRANTP.tar.md5 into CSC
- Put T959VUVKG4-Phone-CL1037720.tar.md5 into Phone
Don't mess with any of the check boxes, and flash.
Let us know how it goes.
i will, sorry for the delay multiupload is taking forever today. thank you guys i should be able to try this in about 11 min
No rush on our part, man. Just hope you get it working.

I bricked my phone (details inside post)

Hi guys I just bricked my phone. It is the vzw galaxy s 3 and I had it rooted using this method --> www dot youtube dot com/watch?v=TnOthODuAvM&list=UUzoKZegNgnnYJ3ex4uatJCw&index=0&feature=plcp
I was trying to un-root it using this method --> www dot youtube dot com/watch?v=4gViuW3xUts&feature=plcp
but it failed writing and now my phone says firmware upgrade encountered and issue. Please select recovery mode in Kies & try again.
I am trying to be as specific as i can as defined by this video --> www dot youtube dot com/watch?v=_UhIfFo8GFE&feature=plcp
Please help me out asap. The reason I am trying to restore it to stock is because i am going to Verizon tomorrow and i am getting it replaced cause my screen cracked. I really messed up didn't I?
After it said it failed to flash in Odin3 I unplugged the phone and pulled the battery but that made it do what it is i think. anybody who can help me?
also I can get into download mode I think I just re installed the stock.vzw_root66 file that i used to root the phone leading to its overwrite making it fail I am not sure how to fix this please help
PS: yes i pushed the power button and i have not tryed to do anything with it yet because i am scared to make it worse. and yes it is charged lol
please help me lol
here is a little update: gyazo [dot] com/3e01595d8a405203c9355996abea130c
why did you use that method when i have a full tutorial in the dev section...stick to xda for your modding needs! also try section 6 of my guide. if that dont recover your device then try the alternate method linked at the bottom of that section.
Thank you very much sir I am trying your methods now but the kernel is taking forever to download considering it is a 1.2 gig file lol. I will post an update after I am done.
I was folliwing your guide and I only got to step 6 then this happened:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any Suggestions?
I got it working please if a moderator sees this delete the thread Thank you!
droidstyle said:
why did you use that method when i have a full tutorial in the dev section...stick to xda for your modding needs! also try section 6 of my guide. if that dont recover your device then try the alternate method linked at the bottom of that section.
Click to expand...
Click to collapse
Since this OP was so kind as to not give you a "thanks" for helping him out. Have one on me and keep up the great work!!
Boy talk about being thankful, gets what he wants then skips out without giving any thanks......kills me. Have one on me as well, Great Work!:good::good:
Thanks!
DroidXpert13 said:
Boy talk about being thankful, gets what he wants then skips out without giving any thanks......kills me. Have one on me as well, Great Work!:good::good:
Click to expand...
Click to collapse
Guys I did not skip out on doing the thanking I had to go to work and i was late lol i had no time till now. Please accept my apology I don't want to get off to a bad start on this forum.
PhenomCorp said:
I was folliwing your guide and I only got to step 6 then this happened:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any Suggestions?
Click to expand...
Click to collapse
This has happened to me before...if this was the stock rooted ROM I would try the stock Un-rooted ROM. I think the rooted one gave me that same issue on multiple flashes and the stock one worked fine.
Sent from my SCH-I535 using xda app-developers app
duarian said:
This has happened to me before...if this was the stock rooted ROM I would try the stock Un-rooted ROM. I think the rooted one gave me that same issue on multiple flashes and the stock one worked fine.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
thats because you most likely got a bad download.

SOLVED: S5 is soft-bricked and flashing anything through odin fails

SOLUTION: I was trying to run Odin in a VMWARE Fusion Virtual Machine. Make sure you are running ODIN on a true windows machine and this should help with rom flashing issues like this one. I borrowed a friend's windows laptop and BOOM! SUCCESS! I'm still a little confused as to why it worked last night on the virtual machine but it doesn't matter now. Please don't hit me too hard with your tomatoes... sneaks out the back door...
I've been lurking on these forums for years (since I had an Epic 4g Touch) and I really respect and applaud the work you all do on here. I'm really in tough times right now with my brand new GS5 and don't know where to go or what to try. I got my phone last week and before doing any OTA updates I tried to flash CF Auto Root. I used the OEM 3.0 cable that comes with the phone and ODIN failed. This left me at a soft-brick with the device only going into download mode and giving me the error message, "firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." I've had no luck at all connecting my phone to KIES. This was last saturday. I tried restoring using stock samsung firmware but ODIN failed every time.
Fast forward to last night.
I bought a Micro USB 2.0 cable and decided to try to flash Samsung stock firmware using it.
SPR-G900PVPU1ANCB-20140411173003 is what I tried flashing using the 2.0 cable. I used ODIN v 3.09 and IT WORKED. My phone completed successfully and restarted. Once I got to the homescreen I noticed that everything seemed to be back to normal. I had no data loss or anything.
I SHOULD HAVE STOPPED HERE AND BEEN HAPPY... but now I was feeling overly confident since this new cable seemed to be the fix for the problems.
I updated the phone OTA twice to the latest firmware, NE5.
Then I tried to flash Phil's CWM recovery and put the SU zip on my phone storage following the instructions on a thread here.
The ODIN flash of the CWM Recovery FAILED and now I think I'm back to where I was before. I cannot seem to flash anything through ODIN (stock firmware, custom recovery, root).
I have tried flashing NE5 stock firmware and the original NCB firmware with no success. I cannot access recovery, just download (odin).
At the top reads:
ODIN MODE
PRODUCT NAME: SM-G900P
CURRENT BINARY: CUSTOM
SYSTEM STATUS: OFFICIAL
KNOX WARRANTY VOID: 0X1 (4)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
UDC START
followed by
"firmware upgrade encountered an issue. Please select recovery mode in Kies and try again."
I know you all are the most knowledgeable android group on the net so if I can't figure this out here then i'll just accept my stupidity and eat the cost of a new phone.
Thank you all very much for your patience and support.
925
Also, Here is what I'm seeing in ODIN when trying to flash anything
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900PVPU1ANE5_G900PSPT1ANE5_G900PVPU1ANE5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i hope someone can answer these questions for you im haveing a similar issues.
jackrabbit72380 said:
i hope someone can answer these questions for you im haveing a similar issues.
Click to expand...
Click to collapse
You're replying to a seven month old post, and it says solved in the OP. What specifically are you having a problem with?
Im also having the same issue, the s5 we have here does the same thing, I may try a win 7 pc since the pc I was using is 8.1 x64
odin fails almost instantly when flashing stock items over to the phone via Odin.
i can either get to the download screen or the firmware error screen and thats it....testing win 7 now.
here is what im getting ....win 7 didnt seem to make a difference.
been looking for the CSC and other files not bundled in a all in one and havent been able to find them for the SM-G900p
http://i.imgur.com/1OfnhRi.jpg
http://i.imgur.com/ly6ZosN.jpg
kellyrx8 said:
here is what im getting ....win 7 didnt seem to make a difference.
been looking for the CSC and other files not bundled in a all in one and havent been able to find them for the SM-G900p
http://i.imgur.com/1OfnhRi.jpg
http://i.imgur.com/ly6ZosN.jpg
Click to expand...
Click to collapse
I am getting the same thing! I am just trying to flash back to stock. Can't get anything to flash. I've tried several stock firmwares and no go.
Sent from my SM-G925P using Tapatalk 2
Sounds like you guys in the last couple of posts are on a build newer than oa6. If that is the case, you can't flash oa6 or older firmware any longer.
I had the same thing finally solved by downloading file from sammobile.com.
sprints5 said:
I had the same thing finally solved by downloading file from sammobile.com.
Click to expand...
Click to collapse
Ill give that a try thanks!
sprints5 said:
I had the same thing finally solved by downloading file from sammobile.com.
Click to expand...
Click to collapse
Which version did you download?
Edit: all I get now is the 'Samsung' splash screen. Also, the only firmware that does not fail in Odin is the OG1 version but it won't boot.
Any help would be appreciated. I just need to get it to stock or something. I can get to the recovery if that helps too.
EDIT : FORGET ALL THAT!!GOT IT TO WORK!! I wiped data in recovery and it booted up
Sent from my SM-G925P using Tapatalk 2
that worked!!! thanks a ton sprints5!!
G900PVPU3BOG1_G900PSPT3BOG1_G900PVPU3BOG1_HOME.tar ( first one listed for Sprint on the page)
thats the one I downloaded for my Sprint GS5 to recover it using Odin 3.10.6
You're Welcome.

Rooted, bricked, Trying to Flash back to Stock but Odin keeps failing, details inside

He howdy ho,
Like it says in the title, I rooted my phone (using galaxys7root.com tutorial) a while back with the intent to get access to Hosts so I could keep myself off reddit at least on mobile. Everything was working fine for a couple weeks, but then this morning a lot of my apps kept crashing (not even while they were being used, just in the background. Repeat offenders were google maps, facebook and google play services). Thinking all I needed was a reboot, I restarted my phone and now its stuck in a boot loop. No big deal, I could just reflash to stock with Odin and be done with it.
Downloaded Odin 3.12.3 and grabbed the T-Mobile stock firmware from galaxys7root.com and started the process in Odin. Except it keeps failing and I don't know why. Here's what odin is saying:
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> emmc_appsboot.mbn
<ID:0/005> lksecapp.mbn
<ID:0/005> xbl.elf
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
screenshot --> i.imgur.com/HnVy5YX.png
Information on phone screen reads:
SW REV CHECK FAIL : [aboot]Fused 3 > Binary 2
[1]eMMC write fail: aboot
EDIT: Tried re-doing it after a fail in a different USB port, gets past initialization, but now its hung up on "SET PARTITON"
Odin log now looks like this:
<ID:0/008> Removed!!
<ID:0/009> Added!!
<ID:0/009> Odin engine v(ID:3.1203)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> emmc_appsboot.mbn
Hi, it's been a while since I have done rooting on galaxy's. But, I'm still using odin. I'm not sure about that galaxys7root.com or how reliable is, but I suggest you visit sammobile.com and get the firmware that's right for your phone, check for phone model or carrier and also the firmware version that matches the one that was on your phone when rooted. Get Odin from them too and follow the instructions on how to flash at the bottom on the download page.
PR_Grim said:
Hi, it's been a while since I have done rooting on galaxy's. But, I'm still using odin. I'm not sure about that galaxys7root.com or how reliable is, but I suggest you visit sammobile.com and get the firmware that's right for your phone, check for phone model or carrier and also the firmware version that matches the one that was on your phone when rooted. Get Odin from them too and follow the instructions on how to flash at the bottom on the download page.
Click to expand...
Click to collapse
Thanks, I didn't know about Sammobile, I'm downloading everything from there right now, will update when I have tried it out (I'm using a free account so the download speed is abhorrent). Thanks for the reply!
Also what version of Odin are you using? Theres a special version that i was told to be used for the galaxy s7 - Odin3 v3.12 by PrinceComsy. Make sure its the PrinceComsy version.
Let us know if you need any more additional help!
It's working now, I used Odin 3.11 I got from SamMobile. No longer bricked and now its got stock firmware on it. Awesome, thanks guys!
Hey I badly need to know which firmware you used? SamMobile only has it for the sm-935f? I need it for the sm-930t, the stock firmware. I'm bricked too.
boobteg2 said:
Hey I badly need to know which firmware you used? SamMobile only has it for the sm-935f? I need it for the sm-930t, the stock firmware. I'm bricked too.
Click to expand...
Click to collapse
It's better to use kies...at least for this firmware for some reason when I downloaded the firmware from Sam mobile it wouldn't give me lte just 4g+ so use kies
elitemodsquad said:
It's better to use kies...at least for this firmware for some reason when I downloaded the firmware from Sam mobile it wouldn't give me lte just 4g+ so use kies
Click to expand...
Click to collapse
Thanks i will give it a try and report back what happens for information for anyone else with this problem.
PR_Grim said:
Hi, it's been a while since I have done rooting on galaxy's. But, I'm still using odin. I'm not sure about that galaxys7root.com or how reliable is, but I suggest you visit sammobile.com and get the firmware that's right for your phone, check for phone model or carrier and also the firmware version that matches the one that was on your phone when rooted. Get Odin from them too and follow the instructions on how to flash at the bottom on the download page.
Click to expand...
Click to collapse
Do you know if there's a fix for this without having to go back to stock ???
elitemodsquad said:
It's better to use kies...at least for this firmware for some reason when I downloaded the firmware from Sam mobile it wouldn't give me lte just 4g+ so use kies
Click to expand...
Click to collapse
Call me naive, but how do I just go about "using kies" to restore my firmware. I downloaded the latest version already.
---------- Post added at 12:25 AM ---------- Previous post was at 12:22 AM ----------
elitemodsquad said:
Do you know if there's a fix for this without having to go back to stock ???
Click to expand...
Click to collapse
Theres no true fix yet, and anyone trying to Root a U.S. varient S7 with these methods should be warned
boobteg2 said:
Hey I badly need to know which firmware you used? SamMobile only has it for the sm-935f? I need it for the sm-930t, the stock firmware. I'm bricked too.
Click to expand...
Click to collapse
Here is the link
http://www.sammobile.com/firmwares/database/SM-G930T/
Use the tools provided there. Follow the instructions. You should be able to restore back to stock. Regarding root, my advice is not to try it.
PR_Grim said:
Here is the link
http://www.sammobile.com/firmwares/database/SM-G930T/
Use the tools provided there. Follow the instructions. You should be able to restore back to stock. Regarding root, my advice is not to try it.
Click to expand...
Click to collapse
How can I give you 1000 thanks. I searched the better part of the weekend and Friday looking for this correct compilation of firmware. Dude, in all sincerity, you just saved me from having to claim insurance and get a different one, which isn't cheap. Took 2 hours to download but still, you are the man in my book today my friend. Thank you.
---------- Post added at 05:37 PM ---------- Previous post was at 05:35 PM ----------
boobteg2 said:
How can I give you 1000 thanks. I searched the better part of the weekend and Friday looking for this correct compilation of firmware. Dude, in all sincerity, you just saved me from having to claim insurance and get a different one, which isn't cheap. Took 2 hours to download but still, you are the man in my book today my friend. Thank you.
Click to expand...
Click to collapse
I even crawled all over sammobile.com. Man thanks. It booted flawlessly.
Glad to here you were able to fix it. Any time.
DJskittles said:
It's working now, I used Odin 3.11 I got from SamMobile. No longer bricked and now its got stock firmware on it. Awesome, thanks guys!
Click to expand...
Click to collapse
Did you use the special odin?

Categories

Resources