Database Info

phone has no data and will not complete an odin flash

So basicallly yesterday i tried rooting my sgs4g. I read the bible and the noob flash guide but some how i still messed up. Using super one click i was able to root the phone without any problems. I hooked the phone up to odin 1.7 and tried flashing one of the stock roms recommended in the noob guide to flashing but odin would not finish the flashing sequence and only states that the complete write operation failed. I was freaking out after about four hours and was literally trying tons of .tar files ive tried two from whitehawx off here the two from the noob guide aand no dice i dont know. i know the phone is in download mode i got that down yesterday lol but i still can not complete the flash. I have both 32 and 64 bit drivers installed on my computer but i cannot complete any type of flash. I can turn the phone on but it has no data and vibrates almost every ten seconds. It does say its still on 2.21 but baseband is unknown and kernal is stock i believe. i can pull the number when i get home. I am lost at this point im just tryilng to get back to stock or anything that makes the phone usable again. thanks in advance to any one who helps i wil donate...lol

alberto7939 said:
So basicallly yesterday i tried rooting my sgs4g. I read the bible and the noob flash guide but some how i still messed up. Using super one click i was able to root the phone without any problems. I hooked the phone up to odin 1.7 and tried flashing one of the stock roms recommended in the noob guide to flashing but odin would not finish the flashing sequence and only states that the complete write operation failed. I was freaking out after about four hours and was literally trying tons of .tar files ive tried two from whitehawx off here the two from the noob guide aand no dice i dont know. i know the phone is in download mode i got that down yesterday lol but i still can not complete the flash. I have both 32 and 64 bit drivers installed on my computer but i cannot complete any type of flash. I can turn the phone on but it has no data and vibrates almost every ten seconds. It does say its still on 2.21 but baseband is unknown and kernal is stock i believe. i can pull the number when i get home. I am lost at this point im just tryilng to get back to stock or anything that makes the phone usable again. thanks in advance to any one who helps i wil donate...lol
Click to expand...
Click to collapse
Start with the basics - a factory data reset. See if that helps.
Also, you should not have/need both 32-bit & 64-bit drivers on your PC. That potentially is a conflict within itself. What operating system are you on? If it's 32-bit, only have those drivers. If it's 64-bit, only use those. I'd uninstall them both and then reinstall a clean set based on your OS.
Look for ODIN 1.85. It's out here somewhere. I've had more luck with it than 1.7.
Let me know how things go with this. If you're not working after trying to go this route let us know and we'll push forward.

alberto7939 said:
So basicallly yesterday i tried rooting my sgs4g. I read the bible and the noob flash guide but some how i still messed up. Using super one click i was able to root the phone without any problems. I hooked the phone up to odin 1.7 and tried flashing one of the stock roms recommended in the noob guide to flashing but odin would not finish the flashing sequence and only states that the complete write operation failed. I was freaking out after about four hours and was literally trying tons of .tar files ive tried two from whitehawx off here the two from the noob guide aand no dice i dont know. i know the phone is in download mode i got that down yesterday lol but i still can not complete the flash. I have both 32 and 64 bit drivers installed on my computer but i cannot complete any type of flash. I can turn the phone on but it has no data and vibrates almost every ten seconds. It does say its still on 2.21 but baseband is unknown and kernal is stock i believe. i can pull the number when i get home. I am lost at this point im just tryilng to get back to stock or anything that makes the phone usable again. thanks in advance to any one who helps i wil donate...lol
Click to expand...
Click to collapse
Do you have multiple USB ports on your computer? Make sure you are plugged into one that goes directly to the CPU motherboard - one on the back. I have had issues trying to flash through USB ports that are on the front of a computer. Odin will recognize your phone, but it will freeze during flash. Just something to check.

I'm on windows 7. I have tried every usb on the laptop lol i've had a long time to try it out. So since I'm on windows 7 I should delete the 32 bit right? Thank both of you guys I'm on my way as we speak to fire up the laptop. I'll delete the drivers and search for the newer version of odin. Thank you guys again

alberto7939 said:
I'm on windows 7. I have tried every usb on the laptop lol i've had a long time to try it out. So since I'm on windows 7 I should delete the 32 bit right? Thank both of you guys I'm on my way as we speak to fire up the laptop. I'll delete the drivers and search for the newer version of odin. Thank you guys again
Click to expand...
Click to collapse
Not necessarily. Win7 can be either 32 or 64-bit. If you're not sure, right-click on your Computer/My Computer icon, and go to Properties. I believe it tells you there. I don't have a Win7 PC in front of me so I can't be 100%.

ok i am on 64bit windows.i deleted everything i downloaded yesterday so im starting from complete scratch i also downloaded odin 1.85. I am going to try to flash the .tar that is listed in the noob guide to oden from krylon 360 [ROM-ODIN]T959VUVKB5.

alberto7939 said:
ok i am on 64bit windows.i deleted everything i downloaded yesterday so im starting from complete scratch i also downloaded odin 1.85. I am going to try to flash the .tar that is listed in the noob guide to oden from krylon 360 [ROM-ODIN]T959VUVKB5.
Click to expand...
Click to collapse
Cool, let me know how it goes

do i have to change anything with the .pit file? im barely going to try the downloads from multiupload are taking really long lol

alberto7939 said:
do i have to change anything with the .pit file? im barely going to try the downloads from multiupload are taking really long lol
Click to expand...
Click to collapse
I haven't looked at the KB5 ROM. Does it come with multiple files (pit, pda, csc, phone)? If so, all you should have to do is put the files in the right slots in ODIN, don't mess with the check boxes, and flash it.

<ID:0/015> Added!!
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> factoryfs.rfs
<ID:0/015> NAND Write Start!!
<ID:0/015> cache.rfs
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
same thing:/

alberto7939 said:
<ID:0/015> Added!!
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> factoryfs.rfs
<ID:0/015> NAND Write Start!!
<ID:0/015> cache.rfs
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
same thing:/
Click to expand...
Click to collapse
Are you getting the phone into download mode?

i was...after that now i have the phone---!----computer logo. odin still reads it but that flash it had the yellow triangle with android inside it
i just tried again but
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> factoryfs.rfs
<ID:0/015> NAND Write Start!!
<ID:0/015> cache.rfs
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

What files are you using and where are you putting them?
Sent from my SGH-T959V using xda premium

I've never used KB5 before. What if you were to try something a bit more updated?
If you want to stay Froyo you can grab the stock KD1 from:
http://hotfile.com/dl/120929051/0ea3e13/T959VUVKD1.rar.html
IF you want to go Gingerbread, you can grab chadster's KG4 from:
http://forum.xda-developers.com/showthread.php?t=1183413
Like Exodian alluded to, you have to make sure you have the files in the right places. Let us know what you're doing. If you can snag a screen shot of ODIN and post it, that might help too.

T959VKB5-Custom (1) in the pda file

k i am downloading both

Yeah kg4 is better than froyo. Well, wifi excluded. Just make sure the files are in the correct spot.
Sent from my SGH-T959V using xda premium

alberto7939 said:
k i am downloading the kg4.
Click to expand...
Click to collapse
Cool. That was the first Gingerbread leak that came with the right boot loaders. What you're going to want to do is:
- Put CODE_T959VUVKG4_CL1385158_REV00_user_low_noship.tar.md5 into PDA
- Put hawk_Sidekick_VibrantPlus_831.pit into PIT
- Put SGH-T959V-CSC-TMB-VIBRANTP.tar.md5 into CSC
- Put T959VUVKG4-Phone-CL1037720.tar.md5 into Phone
Don't mess with any of the check boxes, and flash.
Let us know how it goes.

i will, sorry for the delay multiupload is taking forever today. thank you guys i should be able to try this in about 11 min

No rush on our part, man. Just hope you get it working.

I bricked my phone (details inside post)

Hi guys I just bricked my phone. It is the vzw galaxy s 3 and I had it rooted using this method --> www dot youtube dot com/watch?v=TnOthODuAvM&list=UUzoKZegNgnnYJ3ex4uatJCw&index=0&feature=plcp
I was trying to un-root it using this method --> www dot youtube dot com/watch?v=4gViuW3xUts&feature=plcp
but it failed writing and now my phone says firmware upgrade encountered and issue. Please select recovery mode in Kies & try again.
I am trying to be as specific as i can as defined by this video --> www dot youtube dot com/watch?v=_UhIfFo8GFE&feature=plcp
Please help me out asap. The reason I am trying to restore it to stock is because i am going to Verizon tomorrow and i am getting it replaced cause my screen cracked. I really messed up didn't I?
After it said it failed to flash in Odin3 I unplugged the phone and pulled the battery but that made it do what it is i think. anybody who can help me?
also I can get into download mode I think I just re installed the stock.vzw_root66 file that i used to root the phone leading to its overwrite making it fail I am not sure how to fix this please help
PS: yes i pushed the power button and i have not tryed to do anything with it yet because i am scared to make it worse. and yes it is charged lol
please help me lol

here is a little update: gyazo [dot] com/3e01595d8a405203c9355996abea130c

why did you use that method when i have a full tutorial in the dev section...stick to xda for your modding needs! also try section 6 of my guide. if that dont recover your device then try the alternate method linked at the bottom of that section.

Thank you very much sir I am trying your methods now but the kernel is taking forever to download considering it is a 1.2 gig file lol. I will post an update after I am done.

I was folliwing your guide and I only got to step 6 then this happened:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any Suggestions?

I got it working please if a moderator sees this delete the thread Thank you!

droidstyle said:
why did you use that method when i have a full tutorial in the dev section...stick to xda for your modding needs! also try section 6 of my guide. if that dont recover your device then try the alternate method linked at the bottom of that section.
Click to expand...
Click to collapse
Since this OP was so kind as to not give you a "thanks" for helping him out. Have one on me and keep up the great work!!

Boy talk about being thankful, gets what he wants then skips out without giving any thanks......kills me. Have one on me as well, Great Work!:good::good:

Thanks!
DroidXpert13 said:
Boy talk about being thankful, gets what he wants then skips out without giving any thanks......kills me. Have one on me as well, Great Work!:good::good:
Click to expand...
Click to collapse
Guys I did not skip out on doing the thanking I had to go to work and i was late lol i had no time till now. Please accept my apology I don't want to get off to a bad start on this forum.

PhenomCorp said:
I was folliwing your guide and I only got to step 6 then this happened:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any Suggestions?
Click to expand...
Click to collapse
This has happened to me before...if this was the stock rooted ROM I would try the stock Un-rooted ROM. I think the rooted one gave me that same issue on multiple flashes and the stock one worked fine.
Sent from my SCH-I535 using xda app-developers app

duarian said:
This has happened to me before...if this was the stock rooted ROM I would try the stock Un-rooted ROM. I think the rooted one gave me that same issue on multiple flashes and the stock one worked fine.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
thats because you most likely got a bad download.

[Q] odin not flashing modem or BL

so im having trouble as the title says with odin flashing modems or bootloaders. ive tried running both omegadroid and wanam, downloaded their individual modems/bootloaders they link for you, and tried flashing through odin and it always fails saying this
Now Writing.. Please wait about 2 minutes
FAIL! (Auth)
Receive Response from boot-loader
All threads completed. (succeed 0 / failed 1
i even downloaded odin mobile and it fails as well and tells me 'memory protection is in place, triangle away may fix this'
ive tried using both cwm and twrp to flash roms and do everything, wiped phone clean/format. tried both omegadroid 4.3 and 4.4 no change and wanam 4.4...tried all sorts of way to get this to work but nothing ive google all over checked forums, im sure im missing something, not doing something right idk but i need some help lol. i can't have my phone rooted until i find a fix because everytime i root i have the issue where my phone signal and internet signal drop everytime i put phone in standbye. if anyone needs any more info to help me out ill post whatevers needed.

bump

Use triangle away as suggested
Say if it works. Thanks!
[font=navy=blue]TapaTalk'd from a KFSOWI [/font=navy=blue]
Spoiler
Need help with your Kindle Fire HD 2013? Mention me and i'll help
Been here since 2014
As advice mention me if you need help and you need me.

TheKindleMCPEGuy said:
Use triangle away as suggested
Say if it works. Thanks!
Click to expand...
Click to collapse
sorry forgot to mention that. does the latest version of triangle away work with galaxy s4? i used appdroid to download an older version and it ran everything like it was suppose to but it wasnt working, my count didnt change 'says im at 5'

bump

I used on the last modem (gng8) and worked very well. You must download last version of triangle away from xda. Steps are:
1. If you have an rooted S4 then you must instal with Odin original ROM (stock).
2. Root with CF-Autoroot.
3. Instal Triangle Away and run.
4.Install again Stock ROM.
With this your knox (if you have) will be tripped.
If you have problem with install stock ROM , you must do this:
1.Install last driver
2.Change USB cable
3.Change USB port.
I hope to help you!
Chears.
Sent from my GT-I9505 using Tapatalk 2

did everything like you said. used triangle away, count set to 0, but phone still refuses to install modem and bootloader via odin 3.09. heres what it does:
<ID:0/004> NAND Write Start!!
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1)
does it matter what version of odin i use?

GloMouse said:
did everything like you said. used triangle away, count set to 0, but phone still refuses to install modem and bootloader via odin 3.09. heres what it does:
<ID:0/004> NAND Write Start!!
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1)
does it matter what version of odin i use?
Click to expand...
Click to collapse
Where are you loading the file to?
From my understanding you should be selecting either BL or AP in Odin 3.09 for the bootloader
---------- Post added at 04:42 PM ---------- Previous post was at 04:35 PM ----------
GloMouse said:
did everything like you said. used triangle away, count set to 0, but phone still refuses to install modem and bootloader via odin 3.09. heres what it does:
<ID:0/004> NAND Write Start!!
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1)
does it matter what version of odin i use?
Click to expand...
Click to collapse
I have used both Odin 3.07 and Odin 3.09 with my Samsung S5, although I did have a little trouble at the start as I didn't have the correct USB (Samsung) drivers installed.

r35gtr said:
Where are you loading the file to?
From my understanding you should be selecting either BL or AP in Odin 3.09 for the bootloader
---------- Post added at 04:42 PM ---------- Previous post was at 04:35 PM ----------
I have used both Odin 3.07 and Odin 3.09 with my Samsung S5, although I did have a little trouble at the start as I didn't have the correct USB (Samsung) drivers installed.
Click to expand...
Click to collapse
ive used both oding 3.07 and 3.09 as well, and Bootloaders i always use BL kinda a given and modems i tried in both AP and CP always a fail no matter what lol. however for now i may just stick with the simep CF-AutoRoot. its not wanam or omegadroid but its the only one so far that allows me to have root and keep my phone and internet signal as well lol. and with it i can still download root apps to do all the tweaking i want

Help! No service after XtreStoLite ROM install.

I have a sprint s6 and just installed XtreStoLite. I used TWRP custom recovery. All worked fine except I don't have cell service. It was switched off by default and when I turn it on I get the message "Insert SIM card to access network services"
I tried restarting my phone and removing and replacing the sim card. I also tried inserting an old verzion sim card I had laying around but no luck their. Am I missing something or what is the problem here?

I'm trying to flash my stock rom back but nothing is working!!!
I'm installing with odin and I get this error message:
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Why?!??!?! I am beyond frustrated someone please help

Which kernel have you flashed?

Maybe you mess with the efs folder. Try restoring a backup or restore the efs if u have a backup of it

salehin4070 said:
Which kernel have you flashed?
Click to expand...
Click to collapse
I didn't flash a kernel originally so I guess that means I had the stock kernel. I flashed UniKernel V9 but still no luck with cell service or flashing stock rom.
Kernel I installed > http://forum.xda-developers.com/sprint-galaxy-s6/development/kernel-unikernel-v5-t3166295

Nevermind. Installed renegade and it works.

gunnerrrrr said:
Nevermind. Installed renegade and it works.
Click to expand...
Click to collapse
can you please post a link to a solution for others that have same issue?
Thx

brenner650 said:
can you please post a link to a solution for others that have same issue?
Thx
Click to expand...
Click to collapse
I would like to know too mine stuck on emergency calls only

brenner650 said:
can you please post a link to a solution for others that have same issue?
Thx
Click to expand...
Click to collapse
I installed a different rom. XtreStoLite is not compatible with G920P but I tried it anyways. I installed Renegade as I'm having issues installing the stock rom, and cell data works normal again. If you're looking for a light rom, go with Twisted. Also works for me.

I am having similar issue on G920F, no SIM, Insert SIM card to access network services, restarts on inserting/removal od SIM, no mobile networks menu. I can use Smart switch, had xtrestolite, can flash official and unofficial roms, but it stays the same. everything else works fine (wifi, camera, etc.).
Topic here:
http://forum.xda-developers.com/galaxy-s6/help/g920f-network-issues-t3291903#post64814110

Rooted, bricked, Trying to Flash back to Stock but Odin keeps failing, details inside

He howdy ho,
Like it says in the title, I rooted my phone (using galaxys7root.com tutorial) a while back with the intent to get access to Hosts so I could keep myself off reddit at least on mobile. Everything was working fine for a couple weeks, but then this morning a lot of my apps kept crashing (not even while they were being used, just in the background. Repeat offenders were google maps, facebook and google play services). Thinking all I needed was a reboot, I restarted my phone and now its stuck in a boot loop. No big deal, I could just reflash to stock with Odin and be done with it.
Downloaded Odin 3.12.3 and grabbed the T-Mobile stock firmware from galaxys7root.com and started the process in Odin. Except it keeps failing and I don't know why. Here's what odin is saying:
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> emmc_appsboot.mbn
<ID:0/005> lksecapp.mbn
<ID:0/005> xbl.elf
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
screenshot --> i.imgur.com/HnVy5YX.png
Information on phone screen reads:
SW REV CHECK FAIL : [aboot]Fused 3 > Binary 2
[1]eMMC write fail: aboot
EDIT: Tried re-doing it after a fail in a different USB port, gets past initialization, but now its hung up on "SET PARTITON"
Odin log now looks like this:
<ID:0/008> Removed!!
<ID:0/009> Added!!
<ID:0/009> Odin engine v(ID:3.1203)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> emmc_appsboot.mbn

Hi, it's been a while since I have done rooting on galaxy's. But, I'm still using odin. I'm not sure about that galaxys7root.com or how reliable is, but I suggest you visit sammobile.com and get the firmware that's right for your phone, check for phone model or carrier and also the firmware version that matches the one that was on your phone when rooted. Get Odin from them too and follow the instructions on how to flash at the bottom on the download page.

PR_Grim said:
Hi, it's been a while since I have done rooting on galaxy's. But, I'm still using odin. I'm not sure about that galaxys7root.com or how reliable is, but I suggest you visit sammobile.com and get the firmware that's right for your phone, check for phone model or carrier and also the firmware version that matches the one that was on your phone when rooted. Get Odin from them too and follow the instructions on how to flash at the bottom on the download page.
Click to expand...
Click to collapse
Thanks, I didn't know about Sammobile, I'm downloading everything from there right now, will update when I have tried it out (I'm using a free account so the download speed is abhorrent). Thanks for the reply!

Also what version of Odin are you using? Theres a special version that i was told to be used for the galaxy s7 - Odin3 v3.12 by PrinceComsy. Make sure its the PrinceComsy version.
Let us know if you need any more additional help!

It's working now, I used Odin 3.11 I got from SamMobile. No longer bricked and now its got stock firmware on it. Awesome, thanks guys!

Hey I badly need to know which firmware you used? SamMobile only has it for the sm-935f? I need it for the sm-930t, the stock firmware. I'm bricked too.

boobteg2 said:
Hey I badly need to know which firmware you used? SamMobile only has it for the sm-935f? I need it for the sm-930t, the stock firmware. I'm bricked too.
Click to expand...
Click to collapse
It's better to use kies...at least for this firmware for some reason when I downloaded the firmware from Sam mobile it wouldn't give me lte just 4g+ so use kies

elitemodsquad said:
It's better to use kies...at least for this firmware for some reason when I downloaded the firmware from Sam mobile it wouldn't give me lte just 4g+ so use kies
Click to expand...
Click to collapse
Thanks i will give it a try and report back what happens for information for anyone else with this problem.

PR_Grim said:
Hi, it's been a while since I have done rooting on galaxy's. But, I'm still using odin. I'm not sure about that galaxys7root.com or how reliable is, but I suggest you visit sammobile.com and get the firmware that's right for your phone, check for phone model or carrier and also the firmware version that matches the one that was on your phone when rooted. Get Odin from them too and follow the instructions on how to flash at the bottom on the download page.
Click to expand...
Click to collapse
Do you know if there's a fix for this without having to go back to stock ???

elitemodsquad said:
It's better to use kies...at least for this firmware for some reason when I downloaded the firmware from Sam mobile it wouldn't give me lte just 4g+ so use kies
Click to expand...
Click to collapse
Call me naive, but how do I just go about "using kies" to restore my firmware. I downloaded the latest version already.
---------- Post added at 12:25 AM ---------- Previous post was at 12:22 AM ----------
elitemodsquad said:
Do you know if there's a fix for this without having to go back to stock ???
Click to expand...
Click to collapse
Theres no true fix yet, and anyone trying to Root a U.S. varient S7 with these methods should be warned

boobteg2 said:
Hey I badly need to know which firmware you used? SamMobile only has it for the sm-935f? I need it for the sm-930t, the stock firmware. I'm bricked too.
Click to expand...
Click to collapse
Here is the link
http://www.sammobile.com/firmwares/database/SM-G930T/
Use the tools provided there. Follow the instructions. You should be able to restore back to stock. Regarding root, my advice is not to try it.

PR_Grim said:
Here is the link
http://www.sammobile.com/firmwares/database/SM-G930T/
Use the tools provided there. Follow the instructions. You should be able to restore back to stock. Regarding root, my advice is not to try it.
Click to expand...
Click to collapse
How can I give you 1000 thanks. I searched the better part of the weekend and Friday looking for this correct compilation of firmware. Dude, in all sincerity, you just saved me from having to claim insurance and get a different one, which isn't cheap. Took 2 hours to download but still, you are the man in my book today my friend. Thank you.
---------- Post added at 05:37 PM ---------- Previous post was at 05:35 PM ----------
boobteg2 said:
How can I give you 1000 thanks. I searched the better part of the weekend and Friday looking for this correct compilation of firmware. Dude, in all sincerity, you just saved me from having to claim insurance and get a different one, which isn't cheap. Took 2 hours to download but still, you are the man in my book today my friend. Thank you.
Click to expand...
Click to collapse
I even crawled all over sammobile.com. Man thanks. It booted flawlessly.

Glad to here you were able to fix it. Any time.

DJskittles said:
It's working now, I used Odin 3.11 I got from SamMobile. No longer bricked and now its got stock firmware on it. Awesome, thanks guys!
Click to expand...
Click to collapse
Did you use the special odin?