CWM Recovery 6.0.4.4 for SPICE MI 535
CWM 6.0.4.4 with touch buttons menu. It has all functionality of CWM Recovery, and 1 added extra feature, Aroma File Manager support.
Requirements:
1.Root and MOBILE UNCLE TOOLS APP(if u want to flash through Mobile)
2.Sp Flash Tool(If u want to flash it From PC)
Downloads:
CWM Recovery 6.0.4.4(Carliv Touch Recovery version 2.2)
http://d-h.st/I3l
CWM Recovery 6.0.4.4(Carliv Touch Recovery version 2)
http://d-h.st/UM7
CWM Recovery 6.0.4.4(Carliv Touch Recovery version 1.1)
http://d-h.st/TFi
CWM Recovery 6.0.4.0
http://d-h.st/pXD
https://rapidshare.com/download/share/1E9C7DB102DA653756BFAB4C59B13B01?_e_pi_=7,PAGE_ID10,4600211908
https://docs.google.com/file/d/0B_FSn054nUXkZzJLM0c4eEdkV0U/preview
Instructions for flashing in your phone:
1.Download the recovery and Put it in root of your SDCARD
2.Open Mobile uncle tools and select Recovery Update
3.Flash recovery file
4.Done
Instructions For getting Aroma File manager in CTR
1.Download the flashable zip from here
2.Extract to root of your SD card
3.Next boot into recovery goto Carliv option and Choose Aroma File manager
Instructions for flashing using SP Flash Tools:
1. Install drivers for your phone using SPICE MI 535 Driver.
2. Extract the Stock ROM folder and replace recovery.img with cwm recovery.
3. Extract and open the SP Flash Tools.
4. In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device select mt6589 scatter file.txt
5.Check only recovery.img, preloader and uncheck all others.
6. Switch off your phone (Remove the battery to make sure it is switched off).
7. In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
8. Click the Download option (present on the right of Firmware
> Upgrade option) and the flash tool will start looking for your phone.
9. Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
Warning 1 - Don't interrupt this process as it can potentially brick your device.
Warning 2 - Make sure no power interruption takes place. (Use a laptop to ensure this).
10. After the process completes, a green ring will appear on your device signalling that the process was successful.
11.Disconnect your phone.
CREDIT
@michfood
@yuweng
@carlivfor his CTR Recovery
@amarullz- For AROMA File Manager
@ suhas.holla
@Mtkdroidtools
Press thanks button and feel free to DONATE if you want to encourage my works.
USERS AND DEVELOPERS OF SPICE MI 535 ANDHIKE 818 ARE WELCOMED TO JOIN THIS GROUP:https://www.facebook.com/groups/218101215033991/
It works bro. thanks.
I'll add it in device working list.
@Carliv
Sorry brother if its hurt's you . The intention behind porting this is only that people who are using SPICE MI 535 may use this and benefited. Sorry again bro.
Atrvscet said:
Sorry brother if its hurt's you . The intention behind porting this is only that people who are using SPICE MI 535 may use this and benefited. Sorry again bro.
Click to expand...
Click to collapse
I know. That's the reason I made all these (guide, ported resolutions, and so on) to help as many people as I can, to get a custom touch recovery in their phones. But is not very easy to accept to be removed from your work.
It's ok now that you added proper credits.
carliv said:
I'll add it in device working list.
Click to expand...
Click to collapse
Ok, bro.
Assalam O Alikum,
Hello,
Here after long mind game Alhamdulillah I m sucessfully port CWM Recovery in Z4, Here I M presenting you Root method and CWM Recovery for Qmobile Noir Quatro Z4. CWM Recovery, I was flash via SP-Flash Tool. Both are working perfectly at my device.
How To Root Your Device:
1) Download Framaroot rooting application.
2) Install it on your Quatro Z4 phone.
3) Open the app & select “Install super su” from the drop down menu.
4) Then click on Borimor button.
5) You will get a success message “Success Superuser & su binary installed. You have to reboot your device.
6) Press OK. & Restart your phone. :good:
How to Flash CWM Recovery:
This steps should be done after rooting.
1) Download the CWM Recovery file. (downloading should be done from pc as android default browser may not allow downloading .img file. Or use any third party browser like Dolphin, UC etc.)
2) When the download completes connect your phone to pc, turn on USB mass storage & copy the downlaoded recovery.img file to your phone.
3) Now download this Mobile Uncle Tools app.
4) After installing the Mobile Uncle tools apps, open it.
5) Select Recovery Update option & then TAP the recovery.img option on next screen.
6) After that choose Reboot to Recovery.
7) Your phone will now reboot into recovery mode, use Volume UP & down keys to navigate in recovery mode & Power button to select.
8) In recovery mode, navigate to Reboot System Now (probably this first option) & press the Power button. Select YES to confirm it. now your phone will again bootup in normal mode. :good::good::good:
Congo, you have successfully rooted Qmobile Noir Quatro Z4 & installed the CWM Custom Recovery on it. Go & enjoy some rooted apps & games from play store.Make sure to subscribe us bellow or follow me social networks to stay updated with Qmobile Noir Quatro Z4 development.
Framaroot 1.7.0:
Code:
http://d-h.st/eqr
Mobileuncle MTK Tools v2.9.5:
Code:
http://d-h.st/5Oi
CWM Recovery:
Code:
http://d-h.st/vNd
Remember One Thing DO AT YOUR OWN RISK, I M NOT RESPONSIBLE FOR ANY KIND OF BOOT LOOP OR BRICK.
thnx ..do u have orginal recovery.img in case of emergency?
Sent from my Z4 using xda app-developers app
Has any one of u tried miui rom ported for noir z4..........if yes did u find any lag plz reply its urgent .......decisive role for me to whether buy it or not....plz.....here u go. http://en.miui.com/thread-12119-1-1.html
Sent from my A2_Classic using Tapatalk 2
mobile uncle doesnt pick recovery.img from sdcard, i have put recovery.img in parent directory of sdcard0, what to do now
actually u missed one step, recovery file should be rename by recovery.img ever with capital R, mobile uncle doesnt pick
cmw recovery not sported in my z4 q mobile what i do..
Plzz give a way to root qmobile s4...
Hey bro...
I have bought QMobile s4 but i cannot find any way to root it or flash any recovery to it...plzz give any recovery or working root method....
Many Many Thanks
Hope u will do this sooon..
Custom Rom for Alcatel T’POP
Custom Rom for Alcatel Onetouch (OT) T’pop
Custom Rom for Alcatel T’pop have been very elusive. Searching it online can be very frustrating but you don’t have to worry any more. This rom is Cynogenmod (Xperia Z) rom modded to work with Alcatel Onetouch (OT) T’Pop (4010A, 4010X, 4010D, 4010E) also known in some regions as Alcatel Glory 2S. This Custom Rom has been modded to use m2sd which increases alcatel t’pop internal memory by using the sd card to store Apps.
I wrote this article to guide you through the installation methods, but first you have to have your phone rooted and CWM recovery installed.
How to Root Alcatel (OT) T’pop
To root your Alcatel T’pop you must have a pc running Windows. Since Window does not have Alcatel drivers, download them from here.. After download execute the file and reboot your pc if necessary.
The next step is to install Ishuaji root. download from this link
The next step is to turn ON the USB debugging option on your device opening Menu > Settings > Applications > Development > USB debugging.
Open Ishuaji.
Plug in your device to your PC using the USB cable.
5. Now hit that little green button which appears in the bottom-right corner of the app.
6. It should start rooting your device.
7. You should now be rooted! Excellent! Your device’s been successfully rooted and you’re all set to enjoy the customization of your android.
Installing CWM
Download Cwm from here (link below)
Extract the archive which contains two files (mobile uncle tools.apk and recovery.img) . Install mobile uncle and make sure to move recovery.img to the root of your sd card.
open the mobile uncle application and grant it superuser permissions. Just press the left option (that is the “allow button”.
Click continue then choose “flash recovery from sd card”. Choose recovery.img. Well-done you now have cwm 5 installed on your phone.
Removing Chinese Super User
Download Super User (google for it/playstore/or use the forum)
Switch off your phone.
Press the volume up button and the power on button until the phone enters recovery mode.
Select “Install Zip From Sd Card” option and go to the downloaded super user.zip. Thats All.
INSTALLING XPERIA Z MOD FOR ALCATEL T’POP
Now that you have a rooted phone and CWM recovery installed lets play with custom roms. To install a custom rom is simple but sometime things can go wrong. First you have to save your current rom. Switch off your phone and Press the Volume Up and Power button to enter recover mode. Select Backup and Restore, then Backup and wait for CWM to backup your current ROM which can be used to restore your phone to an earlier state.
Download the Xperia Z custom rom for Alcatel T’pop from here(link below)
Extract the RAR archive which contains XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip and a Folder named RESTORE containing other files. Create a Folder with the name clockworkmod in root of your sd card if its not yet available. Open the folder and create another named backup.
Copy the Restore folder you extracted to clockworkmod>backup.
Copy XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip to the root of your sd card, do not extract the zip file.
Installation
Switch off your phone.
Press volume up and power buttons at the same time until you enter recovery mode.
Do the following first -Wipe data/factory reset -Wipe cache partition if any
Select the option INSTALL ZIP FROM SDCARD. Select XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip.
Install the zip
When complete select go back until you find the option BACKUP AND RESTORE.
Select Restore and select Restore/ .Wait until the operation is complete and reboot your system.
THATS ALL. ENJOY YOUR CUSTOM ANDROID. (STAY TUNED FOR OTHER CUSTOM ROMS)
HERE IS ANOTHER CUSTOM ROM I UPLOADED FOR ALCATEL T’POP(4010A, 4010X, 4010D, 4010E ). THIS MOD CAN BE USED AS STOCK ROM.
The installation is the same as shown above
download mutacion.zip from here(link below)
save the zip in root of sd card.
download Restaurar folder from here (link below)
copy/move it to /clockworkmod>backup
reboot your phone to recovery mode and wipe ALL cache , Wipe data/factory reset .
the next step is to install mutacion.zip. procedure is shown above.
still in recovery mode, go to backup and restore and restore your device with the files you downloaded shown as /Restaurar
reboot your device and enjoy.
Someone please confirm if this thing works
Its
bumjrah said:
Someone please confirm if this thing works
Click to expand...
Click to collapse
Check out.
http : // ngashsk.blogspot.com/p/alcatel (dot) html
Av tried it but its not working well with 4010D as only one simcard being detected
Link Below?
loxdon said:
Custom Rom for Alcatel T’POP
Custom Rom for Alcatel Onetouch (OT) T’pop
Custom Rom for Alcatel T’pop have been very elusive. Searching it online can be very frustrating but you don’t have to worry any more. This rom is Cynogenmod (Xperia Z) rom modded to work with Alcatel Onetouch (OT) T’Pop (4010A, 4010X, 4010D, 4010E) also known in some regions as Alcatel Glory 2S. This Custom Rom has been modded to use m2sd which increases alcatel t’pop internal memory by using the sd card to store Apps.
I wrote this article to guide you through the installation methods, but first you have to have your phone rooted and CWM recovery installed.
How to Root Alcatel (OT) T’pop
To root your Alcatel T’pop you must have a pc running Windows. Since Window does not have Alcatel drivers, download them from here.. After download execute the file and reboot your pc if necessary.
The next step is to install Ishuaji root. download from this link
The next step is to turn ON the USB debugging option on your device opening Menu > Settings > Applications > Development > USB debugging.
Open Ishuaji.
Plug in your device to your PC using the USB cable.
5. Now hit that little green button which appears in the bottom-right corner of the app.
6. It should start rooting your device.
7. You should now be rooted! Excellent! Your device’s been successfully rooted and you’re all set to enjoy the customization of your android.
Installing CWM
Download Cwm from here (link below)
Extract the archive which contains two files (mobile uncle tools.apk and recovery.img) . Install mobile uncle and make sure to move recovery.img to the root of your sd card.
open the mobile uncle application and grant it superuser permissions. Just press the left option (that is the “allow button”.
Click continue then choose “flash recovery from sd card”. Choose recovery.img. Well-done you now have cwm 5 installed on your phone.
Removing Chinese Super User
Download Super User (google for it/playstore/or use the forum)
Switch off your phone.
Press the volume up button and the power on button until the phone enters recovery mode.
Select “Install Zip From Sd Card” option and go to the downloaded super user.zip. Thats All.
INSTALLING XPERIA Z MOD FOR ALCATEL T’POP
Now that you have a rooted phone and CWM recovery installed lets play with custom roms. To install a custom rom is simple but sometime things can go wrong. First you have to save your current rom. Switch off your phone and Press the Volume Up and Power button to enter recover mode. Select Backup and Restore, then Backup and wait for CWM to backup your current ROM which can be used to restore your phone to an earlier state.
Download the Xperia Z custom rom for Alcatel T’pop from here(link below)
Extract the RAR archive which contains XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip and a Folder named RESTORE containing other files. Create a Folder with the name clockworkmod in root of your sd card if its not yet available. Open the folder and create another named backup.
Copy the Restore folder you extracted to clockworkmod>backup.
Copy XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip to the root of your sd card, do not extract the zip file.
Installation
Switch off your phone.
Press volume up and power buttons at the same time until you enter recovery mode.
Do the following first -Wipe data/factory reset -Wipe cache partition if any
Select the option INSTALL ZIP FROM SDCARD. Select XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip.
Install the zip
When complete select go back until you find the option BACKUP AND RESTORE.
Select Restore and select Restore/ .Wait until the operation is complete and reboot your system.
THATS ALL. ENJOY YOUR CUSTOM ANDROID. (STAY TUNED FOR OTHER CUSTOM ROMS)
HERE IS ANOTHER CUSTOM ROM I UPLOADED FOR ALCATEL T’POP(4010A, 4010X, 4010D, 4010E ). THIS MOD CAN BE USED AS STOCK ROM.
The installation is the same as shown above
download mutacion.zip from here(link below)
save the zip in root of sd card.
download Restaurar folder from here (link below)
copy/move it to /clockworkmod>backup
reboot your phone to recovery mode and wipe ALL cache , Wipe data/factory reset .
the next step is to install mutacion.zip. procedure is shown above.
still in recovery mode, go to backup and restore and restore your device with the files you downloaded shown as /Restaurar
reboot your device and enjoy.
Click to expand...
Click to collapse
Can anyone verify if the files dowload links are removed, or it´s just me that I don´t find them?
1
:22
working for sure
just visit mutaanto(dot)wordpress(dot)com....u will find the zerostorm rom for alcatel 4010x..working perfectly
http://www.mediafire.com/download/djg7n8ukahdac45/Custom_Gingerx_katv2_by_DrunkenLizard.rar
Rom for the 4010X not D, X!!
Normal flashing instructions, full wipes, install, flash enclosed CWM backup, flash a few zips..etc... included in the readme file. Not my rom, found it here: http://www.youtube.com/watch?v=Kere5VobLC0 and not my phone, so risked it. Works great and better than the xperia rom and stock anyway. Still need root uninstaller as bloat even on this one. After bloatware removal, there is maybe 130meg left ish, in system memory...
robneymcplum said:
http://www.mediafire.com/download/djg7n8ukahdac45/Custom_Gingerx_katv2_by_DrunkenLizard.rar
Rom for the 4010X not D, X!!
Normal flashing instructions, full wipes, install, flash enclosed CWM backup, flash a few zips..etc... included in the readme file. Not my rom, found it here: http://www.youtube.com/watch?v=Kere5VobLC0 and not my phone, so risked it. Works great and better than the xperia rom and stock anyway. Still need root uninstaller as bloat even on this one. After bloatware removal, there is maybe 130meg left ish, in system memory...
Click to expand...
Click to collapse
I need some help.
Did you had clockworkmod installed on the phone? If so, how did you installed it? Since the recovery.img way didn't work for me...The phone restarted, but no cwm at all...
Or you installed it without cwm?
Thanks in advance!
wex28 said:
I need some help.
Did you had clockworkmod installed on the phone? If so, how did you installed it? Since the recovery.img way didn't work for me...The phone restarted, but no cwm at all...
Or you installed it without cwm?
Thanks in advance!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2320583
alcatel one touch 4010x
hi guy i am trying to flash recovery into my alcatel one touch 4010x using sp flash tool now i tells me that my phone does not have a bootloader..
the phone wont boot to recovery..
it says download bootloader..
does anyone have a fix for this?
help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
worked for me.
loxdon said:
Custom Rom for Alcatel T’POP
Custom Rom for Alcatel Onetouch (OT) T’pop
Custom Rom for Alcatel T’pop have been very elusive. Searching it online can be very frustrating but you don’t have to worry any more. This rom is Cynogenmod (Xperia Z) rom modded to work with Alcatel Onetouch (OT) T’Pop (4010A, 4010X, 4010D, 4010E) also known in some regions as Alcatel Glory 2S. This Custom Rom has been modded to use m2sd which increases alcatel t’pop internal memory by using the sd card to store Apps.
I wrote this article to guide you through the installation methods, but first you have to have your phone rooted and CWM recovery installed.
How to Root Alcatel (OT) T’pop
To root your Alcatel T’pop you must have a pc running Windows. Since Window does not have Alcatel drivers, download them from here.. After download execute the file and reboot your pc if necessary.
The next step is to install Ishuaji root. download from this link
The next step is to turn ON the USB debugging option on your device opening Menu > Settings > Applications > Development > USB debugging.
Open Ishuaji.
Plug in your device to your PC using the USB cable.
5. Now hit that little green button which appears in the bottom-right corner of the app.
6. It should start rooting your device.
7. You should now be rooted! Excellent! Your device’s been successfully rooted and you’re all set to enjoy the customization of your android.
Installing CWM
Download Cwm from here (link below)
Extract the archive which contains two files (mobile uncle tools.apk and recovery.img) . Install mobile uncle and make sure to move recovery.img to the root of your sd card.
open the mobile uncle application and grant it superuser permissions. Just press the left option (that is the “allow button”.
Click continue then choose “flash recovery from sd card”. Choose recovery.img. Well-done you now have cwm 5 installed on your phone.
Removing Chinese Super User
Download Super User (google for it/playstore/or use the forum)
Switch off your phone.
Press the volume up button and the power on button until the phone enters recovery mode.
Select “Install Zip From Sd Card” option and go to the downloaded super user.zip. Thats All.
INSTALLING XPERIA Z MOD FOR ALCATEL T’POP
Now that you have a rooted phone and CWM recovery installed lets play with custom roms. To install a custom rom is simple but sometime things can go wrong. First you have to save your current rom. Switch off your phone and Press the Volume Up and Power button to enter recover mode. Select Backup and Restore, then Backup and wait for CWM to backup your current ROM which can be used to restore your phone to an earlier state.
Download the Xperia Z custom rom for Alcatel T’pop from here(link below)
Extract the RAR archive which contains XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip and a Folder named RESTORE containing other files. Create a Folder with the name clockworkmod in root of your sd card if its not yet available. Open the folder and create another named backup.
Copy the Restore folder you extracted to clockworkmod>backup.
Copy XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip to the root of your sd card, do not extract the zip file.
Installation
Switch off your phone.
Press volume up and power buttons at the same time until you enter recovery mode.
Do the following first -Wipe data/factory reset -Wipe cache partition if any
Select the option INSTALL ZIP FROM SDCARD. Select XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip.
Install the zip
When complete select go back until you find the option BACKUP AND RESTORE.
Select Restore and select Restore/ .Wait until the operation is complete and reboot your system.
THATS ALL. ENJOY YOUR CUSTOM ANDROID. (STAY TUNED FOR OTHER CUSTOM ROMS)
HERE IS ANOTHER CUSTOM ROM I UPLOADED FOR ALCATEL T’POP(4010A, 4010X, 4010D, 4010E ). THIS MOD CAN BE USED AS STOCK ROM.
The installation is the same as shown above
download mutacion.zip from here(link below)
save the zip in root of sd card.
download Restaurar folder from here (link below)
copy/move it to /clockworkmod>backup
reboot your phone to recovery mode and wipe ALL cache , Wipe data/factory reset .
the next step is to install mutacion.zip. procedure is shown above.
still in recovery mode, go to backup and restore and restore your device with the files you downloaded shown as /Restaurar
reboot your device and enjoy.
Click to expand...
Click to collapse
thanks for the guide xda z the oñly place to be
kakalex said:
Av tried it but its not working well with 4010D as only one simcard being detected
Click to expand...
Click to collapse
So how did you solve the dual SIM issue?
Sent from my C2305 using XDA Free mobile app
DO NOT EVER TRY TO USE THIS FOR 4010D model. SECOND SIM UTILITY IS GONNA GET LOST!!
Can anyone please give me original rom backup for 4010D. My rom is crashed and I am not able to boot it. And PC also not detecting the device (May be problem with Drivers). I didn't took bakup, can you give ??
Hey guys, I'm trying to root this Alcatel 4010X and I'm following the instructions.
I installed the usb drivers to my laptop, installed ishuaji_root.exe an ran it..... Followed all the instructions and now my phone has restarted but has a lot of chinese writing - different apps etc, even though the phone language is still UK
I'm struggling with the next bit about installing CWM - I've installed it to my laptop via this https://www.xda-developers.com/how-to-install-clockworkmod/ link,but I'm unsure what I need to do now....
Does anyone know the newest version of android that will work on this handset?
itnorfolk said:
Does anyone know the newest version of android that will work on this handset?
Click to expand...
Click to collapse
There is no newer version. Only skinned versions of those newer ROMs.
HI ALL!!
Today I wanna show you how to root the Lenovo A390 without PC and install TWRP RECOVERY for Lenovo A390.
[TO ROOT]
1. Download framaroot latest version from this thread.
(http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276)
2. Install the apk
3. Open the app. After that, choose install supersu and choose available exploit.
4. After that reboot your device. After that, search SuperSU app on your application drawer. Then enjoy !
[INSTALL TWRP RECOVERY]
1. Install MOBILEUNCLE MTK TOOLS
( https://play.google.com/store/apps/details?id=com.mobileuncle.toolbox )
2. Download the TWRP recovery.
( https://docs.google.com/file/d/11-V...c9b-MfFTWpi9D_vBI0oVISPgRVcB/edit?usp=sharing )
3. Put the TWRP recovery.img on root of your SD-Card.
4. Open the Mobileuncle MTK tools app.
5. Select recovery update.
6. The app will automatically detect the recovery.img under "recovery file on sdcard"
7. Select the recovery.img. Click OK.
8. Then the app will ask you to reboot into recovery. Click OK to reboot into your new TWRP recovery.
9. Enjoy!!!
* please make sure that you put the recovery.img file on root of your sdcard. Otherwise the MTK tools will not detect it.
( PRESS THANKS IF IT HELP YOU) :good:
anyone try thiss???
^ FEEL FREE TO PRESS THANKS BUTTON ^
Its kinda boring here. Hahaha
After i reboot nothing happen , i try 3 exploit and none of them are work i have a390 with last update
---------- Post added at 11:21 AM ---------- Previous post was at 11:20 AM ----------
rafi_android said:
Its kinda boring here. Hahaha
Click to expand...
Click to collapse
I try 3 exploit and none of them work i have a390 with last update hmm
The ZTE Blade C V807 is an MTK device that has no official TWRP and thus users can’t flash it easily through Goo Manager or TWRP Manager. However, TWRP has been compiled for this device and I shared it in this thread.
I saw it more useful to share the procedure on how to install it as well, as it would help another person with this device in case they wanted to install it more so in an attempt to flash custom roms on their phone.
Procedure:
Download TWRP from this thread and put it at the root of your SD Card (Not in any folder)
Rename TWRP image to ‘recovery.img’
Download and install Mobileuncle Tools and install it on your phone
Open Mobileuncle Tools and grant it root permission (See this thread to root phone)
Scroll to ‘Recovery Update’
Select ‘recovery.img’
Tap ‘OK’ to confirm
Done.
You can boot into recovery mode (Start phone while holding the Volume Up button) to access new recovery.
Enjoy!