Presenting CWM recovery for Micromax Viva A72 and the steps for Rooting Micromax Viva A72.
Downloads
Recovery and scatter file
https://www.mediafire.com/?4zfa8z1zfw7dob5
Mtkdroid Tool
http://www.mediafire.com/download/zs9m5il96ywriwc/MtkDroidTools.rar
SPFlash Tool V3
http://www.mediafire.com/download/wjusbvd3b9e6q4g/SP_Flash_Tool_v3.rar
Driver
http://www.mediafire.com/download/zcahcuwex0vamam/MT6577%20USB%20VCOM%20drivers.7z
Click to expand...
Click to collapse
First we need to flash CWM Recovery using the SPFlash Tool.
0. Install driver on pc before doing any thing.
1. Extract recovery and scatter file in the same folder on desktop.
2. Start SPFlash Tool and select scatter file from the extracted folder.
[Note in SPFlash Tool only recovery option should be selected.]
3. Shutdown the phone and remove battery.
4. In SPFlash Tool click on Download button and then connect you phone, wait for a few sec and then you'll see the green which means CWM recovery has been flashed.
Second Rooting Micromax Viva A72
1. Download Supersu flashable zip to the sdcard of you phone.
2. Download Mtkdroid tool and extract it on pc.
3. Connect you phone to pc. (Note - debugging option should be selected before connecting phone to pc)
4. Open extracted folder and navigate to adb folder, here press Shift+Ctrt+right click of mouse now select "Open command Prompt here".
3. In the command prompt enter following command without quote "adb device" and then "adb reboot recovery", wait for a few secs. you phone will reboot to recovery.
4. flash supersu zip through CWM Recovery and reboot.
You have successfully Rooted your Micromax Viva A72 and installed CWM Recovery.:good:
CREDITS
1. rua1 for Mtkdroid Tool.
2. Me for creating recovery and testing
3. SPFlash Tool creator (I don't Know the name of the developer)
Disclaimer
I have tested this on 2 Phone without any problem.
Use it on your own RISK.
I or any other should not be held responsible for any damage to your phone, to you or to your brain
Click to expand...
Click to collapse
So Guys I am here to give you all rooting tutorial for spice mi 509, how to install CWM recovery and firmwares installation
First of all download
SPflashtool(download here),
mtk droid tool(download here)
firmwares for spice m 509 download1, download2
ALL firmwares are stock firmwares
Flashing KitKat rom on spice mI 509
1: download firmware from this site(download Firmware v5). and extract it at a particular folder. In the firmware you will get spflashtool and drivers included. so if your drivers are not installed using usb cable install drivers from firmware.
2: now open spflashtool.exe and switch off your phone.
3: and click on scatter loading which is the second option in right and select MT6582_scatter_loading.txt file from firmware.
4: you will see many files are loaded.
5: now click download and connect your device without battery. when connected, press vol down so that spflashtool recognizes your device.
6: then you will see some blue and yellow bar filling up which means process is started. and when process completed you will see a green ring on the screen.
7: now start your device and enjoy KitKat on Spice Mi 509.
Now if you want to root your device
1: open mtk droid tool and switch off device
2: now connect the device using usb cable, while connecting press vol down button. this will install adb drivers of the device and if the drivers are already installed, mtkdroid tool will detect it.
3: now click on root at right corner of mtkdroid tool.
this will start rooting your device.
Now how to install CWM recovery in spice mi 509
1: open mtkdroid tool
2: click on root, recovery and backup and then select boot.img from the firmware downloaded above.
3: and you will see recovery file is made for the device
4: now close mtkdroid tool and place the CWM recovery(not boot patched), which you have made, in the firmware folder and rename it to recovery.img
5: now open spflashtool and load scatter file from firmware folder.
6: and uncheck all loaded files and only tick on recovery.
7: now click download and connect your device in switched off using USB cable and after connecting press vol down so that droid tool can detect your device.
8: and thus after the process completed you will see green ring. and now disconnect your device.
and open cwm recovery by pressing vol down and power button.
Now if above given rooting method does not work. use this method.
1: when you have installed CWM recovery download this super_SU zip.
2: and place this on your sd card
3: now open cwm in device and flash this zip by selcting install from sd and then select super_SU zip file.
4: your device is now rooted.
CUSTOM ROMS For Spice MI 509
1. FREEME OS(Awesome rom)- DOWNLOAD HERE
2. DARKL V1.6(Awesome)- Download Here
3. MIUI V6 5.4.10(Awesome rom, recommended)-> DOWNLOAD HERE
4. CLEANKAT V4.0(more free ram)- Download Here
5. Hive ROM (Awesome) -> Download Here
6. Touch OS (Fast and Smooth) -> Download Here
7. MERE(Most Epic Rom Ever)-> Download Here
Dolby Sound For Mere Rom- Download Here
8- Material V3 Rom-> Download Here
Fix For Material V3 Rom-> download here
9- Lewa OS V5 (only one bug-play store not wprking, use third party app)
DOWNLOAD HERE
10. LG G3 Clone Rom - DOWNLOAD HERE
11. Galaxy Rom- DOWNLOAD HERE
12. SlimFresh V9: DOWNLOAD HERE
13. XTREME os8: DOWNLAOD HERE
14. ANSP V4: DOWNLOAD HERE
Method to flash custom roms
1. You must be on Spice Stock Kitkat. Download from above link.
2. CWM/CTR must be installed.
3. Boot into recovery and Wipe Data-Factory Reset.
4. Now select Install zip and browse to the location where you have MERE ROM or MATERIAL V3 ROM zip and install it.
5. Reboot your device.
6. Flash the fix zip(only For Material Rom) and dolby digital zip(only for MERE Rom) after the first boot. We are done!
All the best!
Note:- I am not responsible for phone brick, tsunami or earth quake happens after this tutorial, if you follow!!!
:- flash dolby digital zip only for MERE rom
:- Flash fix.zip only for Material V3
how to connect usb pen drive
How to connect pen drive and external hdd to spice mi 509
cwm has working on my mobile but without sp flash tool
prasad143 said:
cwm has working on my mobile but without sp flash tool
Click to expand...
Click to collapse
the mobile comes with its own custom recovery and does not allow any flashing. And above tutorial is for those who are facing problem in rooting mi509 with kitkat. and flashing CWM using spflashtool does not require root.
cyanogenmod
how to cyanogenmod on spice mi509
here is the new MERE rom from Mr. illusionist...
http://forum.xda-developers.com/android/general/mt6582-epic-rom-spice-stellar-t2998644#post58079880
they are uploading the file and will be soon available for download
New roms added including MIUI V6
New Roms added Including AWESOME MIUI V6 rom.
gautam.is.sharma said:
New Roms added Including AWESOME MIUI V6 rom.
Click to expand...
Click to collapse
Hi Gautam,
Can you please advice how to install MIUI V6 install on my Spice Mi 509,
I am install kingroot and rooted.
Can just download miui rom and copy in sd card and update?
MIUI rom update without PC its possible.
Kind Regards
Manoj K. Chauhan
km230580 said:
Hi Gautam,
Can you please advice how to install MIUI V6 install on my Spice Mi 509,
I am install kingroot and rooted.
Can just download miui rom and copy in sd card and update?
MIUI rom update without PC its possible.
Kind Regards
Manoj K. Chauhan
Click to expand...
Click to collapse
Bro you dont need pc and laptops for installation of custom roms just needed a rooted device with CWM Recovery.
you should be on stock KITKAT.
For MIUI installations install CWM/CTR first, if you are having CWM/CTR already, then just put miui rom in your sd card then go to recovery in spice mi509.
Now wipe data and format system, then install from sd card. and reboot. wait for 5 min, and there you will explore miui in MI509.
say thanks to the porter of the rom.
gautam.is.sharma said:
Bro you dont need pc and laptops for installation of custom roms just needed a rooted device with CWM Recovery.
you should be on stock KITKAT.
For MIUI installations install CWM/CTR first, if you are having CWM/CTR already, then just put miui rom in your sd card then go to recovery in spice mi509.
Now wipe data and format system, then install from sd card. and reboot. wait for 5 min, and there you will explore miui in MI509.
say thanks to the porter of the rom.
Click to expand...
Click to collapse
http://cdn4.xda-developers.com/images/icons/icon14.gif
Thanks for your reply gautam, I have Android 4.2.2 version in my phone.
Can you please advice what can i do? to install MIUI rom....
km230580 said:
http://cdn4.xda-developers.com/images/icons/icon14.gif
Thanks for your reply gautam, I have Android 4.2.2 version in my phone.
Can you please advice what can i do? to install MIUI rom....
Click to expand...
Click to collapse
Click Thanks button instead of saying so. That helps a lot.
Flash stock Kitkat and then only you can install MIUI. Complete procedure is given in the first post.
NEW ROMS UPLOADED
FREEME OS-http://forum.xda-developers.com/android/development/mt6582-freeme-os-v3-0-spice-mi-509-t3051987
DarkL V1.6- http://forum.xda-developers.com/android/development/mt6582-darkl-v1-6-spice-mi-509-t3051857
saurabh1234 said:
NEW ROMS UPLOADED
FREEME OS-http://forum.xda-developers.com/android/development/mt6582-freeme-os-v3-0-spice-mi-509-t3051987
DarkL V1.6- http://forum.xda-developers.com/android/development/mt6582-darkl-v1-6-spice-mi-509-t3051857
Click to expand...
Click to collapse
Added your new roms.
This method work in spice steller mi 526?
gautam.is.sharma said:
So Guys I am here to give you all rooting tutorial for spice mi 509, how to install CWM recovery and firmwares installation
First of all download
SPflashtool(download here),
mtk droid tool(download here)
firmwares for spice m 509 download1, download2
ALL firmwares are stock firmwares
Flashing KitKat rom on spice mI 509
1: download firmware from this site(download Firmware v5). and extract it at a particular folder. In the firmware you will get spflashtool and drivers included. so if your drivers are not installed using usb cable install drivers from firmware.
2: now open spflashtool.exe and switch off your phone.
3: and click on scatter loading which is the second option in right and select MT6582_scatter_loading.txt file from firmware.
4: you will see many files are loaded.
5: now click download and connect your device without battery. when connected, press vol down so that spflashtool recognizes your device.
6: then you will see some blue and yellow bar filling up which means process is started. and when process completed you will see a green ring on the screen.
7: now start your device and enjoy KitKat on Spice Mi 509.
Now if you want to root your device
1: open mtk droid tool and switch off device
2: now connect the device using usb cable, while connecting press vol down button. this will install adb drivers of the device and if the drivers are already installed, mtkdroid tool will detect it.
3: now click on root at right corner of mtkdroid tool.
this will start rooting your device.
Now how to install CWM recovery in spice mi 509
1: open mtkdroid tool
2: click on root, recovery and backup and then select boot.img from the firmware downloaded above.
3: and you will see recovery file is made for the device
4: now close mtkdroid tool and place the CWM recovery(not boot patched), which you have made, in the firmware folder and rename it to recovery.img
5: now open spflashtool and load scatter file from firmware folder.
6: and uncheck all loaded files and only tick on recovery.
7: now click download and connect your device in switched off using USB cable and after connecting press vol down so that droid tool can detect your device.
8: and thus after the process completed you will see green ring. and now disconnect your device.
and open cwm recovery by pressing vol down and power button.
Now if above given rooting method does not work. use this method.
1: when you have installed CWM recovery download this super_SU zip.
2: and place this on your sd card
3: now open cwm in device and flash this zip by selcting install from sd and then select super_SU zip file.
4: your device is now rooted.
CUSTOM ROMS For Spice MI 509
1. FREEME OS(Awesome rom)- DOWNLOAD HERE
2. DARKL V1.6(Awesome)- Download Here
3. MIUI V6 5.4.10(Awesome rom, recommended)-> DOWNLOAD HERE
4. CLEANKAT V4.0(more free ram)- Download Here
5. Hive ROM (Awesome) -> Download Here
6. Touch OS (Fast and Smooth) -> Download Here
7. MERE(Most Epic Rom Ever)-> Download Here
Dolby Sound For Mere Rom- Download Here
8- Material V3 Rom-> Download Here
Fix For Material V3 Rom-> download here
9- Lewa OS V5 (only one bug-play store not wprking, use third party app)
DOWNLOAD HERE
10. LG G3 Clone Rom - DOWNLOAD HERE
11. Galaxy Rom- DOWNLOAD HERE
12. SlimFresh V9: DOWNLOAD HERE
13. XTREME os8: DOWNLAOD HERE
14. ANSP V4: DOWNLOAD HERE
Method to flash custom roms
1. You must be on Spice Stock Kitkat. Download from above link.
2. CWM/CTR must be installed.
3. Boot into recovery and Wipe Data-Factory Reset.
4. Now select Install zip and browse to the location where you have MERE ROM or MATERIAL V3 ROM zip and install it.
5. Reboot your device.
6. Flash the fix zip(only For Material Rom) and dolby digital zip(only for MERE Rom) after the first boot. We are done!
All the best!
Note:- I am not responsible for phone brick, tsunami or earth quake happens after this tutorial, if you follow!!!
:- flash dolby digital zip only for MERE rom
:- Flash fix.zip only for Material V3
Click to expand...
Click to collapse
This is work on spice Steller mi 526?
kevinsubba said:
This is work on spice Steller mi 526?
Click to expand...
Click to collapse
yes it will work......you only need to have your mi 526 firmware...not mi 509 firmware...
Hello Guyz,
As no Dev. Has been made a recovery for a12* at last after lots of efforts...
I developed A Recovery For Our Devices
A waiting is over
Introducing All new
"Philz Recovery" Only By me for
Karbonn A12*(Star)
link for recovery: https://drive.google.com/file/d/0BxQZF8lqd-BHaE8yRGtUekI0Snc/view
Software to flash recovery : https://github.com/DsLNeXuS/Rashr/...aad14/RashrApp/RashrApp-release.apk?raw=true
Known issues : Touch not working properly but u can use volume keys to move up and down and power key for selection...
Every thing else working well if u find any issue than u can comment below or message me on fb..
How to disable touch on recovery :
Just boot into recovery... select Recovery setting and then go to Gui setting and disable touch....
Now will discuss how to flash recovery
Steps:-
There Are 2 wayz to install this recovery...
I. INSTALLATION WITHOUT PC
1: download mobileuncletool or flashify from playstore or link given by me.
2: open mobileuncletool or flashify n click on update recovery n wait for completion.
3: After completion boot into recovery mode..
II. INSTALLATION WITH PC
1: Download spflash tool for pc n download scatter file for MT6572 devices n install all mtk drivers on pc.
2: Open spflash tool n load the scatter file that u have downloaded above.
3: Tick on recovery n then select recovery.img n click on download.
4: Now plug usb with ur pc n connect phone without battery n then connect usb cable with phone and insert the battery.
5: Installation process will start automatically n wait for completion..
THIS IS MY SECOND WORK FOR KARBONN A12*
ENJOY CWM BASED RECOVERY
Join my grp on Facebook
Karbonn Smart A12 Star Official
(Development & Discussion) https://m.facebook.com/groups/718681911514380?refid=18&__tn__=C
Hit thanks to appreciate my work... :thumbup:
Recovery for K12*
thanku bro....
Installation with mobileuncle tool
Ui of PhilZ recovery
Hello All this is a tutorial about How to flash TWRP without rooting Your MTK Powered Mobile..
Things You will Need. :-
~ A Pc
~ Any Custom Recovery For Your Device
~ SP Flash Tool
~ A Scatter File (For Your Chipset)
~ SmartPhone In Which You want to flash recovery
*Make sure You Have Mediatek Drivers Installed into Your PC
* Put SP Flash tool,Scatter File,And Recovery.img in the same folder
---------------###--------###------------###-------
First of All Switched Off Your Mobile
1. Turn on Your Pc [emoji12]
2. Open SP flash tool
3. load Scatter File
*Make Sure Only Recovery Box is Marked in SP flash tool
4. Click Download Button
5. Connect Your Device to PC using USB Cable
6. Wait for the process to be completed....
A green box will pop up. "Completed"
Unplug Your Device and and Press -PowerButton+VolumeUp - at the same time.. Keep Holding.. You can see You Have a Working Custom Recovery [emoji5]
Now You can Flash Xposed, SuperSu, or any ZIP that You want. .. [emoji4]
Sent from my Micromax E352 using Tapatalk
IFlash carliv recovery to Qmobile x35 and replace your stock recovery.
I have ported carliv recovery to qmobile x35 after modifications to use only on qmobile 35 using Carliv's porting guide so don't use on any other device.
First of all make backup of your full rom using mtkdroid tools.
Follow the procedure to flash recovery to your Qmobile x35.
1. Download the recovery_carliv.img and mt6572.txt scatter files attached below.
Rename recovery_carliv.img to recovery.img
2. Download SPflash tool. As the fastboot utility does not work in this device so only use SPflash tool. And download Mtk preloader drivers.
3. Open SPflash tool and go to download tab and then click scatter file to choose scatter file that u downloaded from here. It will load the scatter file in download tab.
4. Now only tick the recovery checkbox and then move your mouse in the same line towards last column and click it.
It will open window to select the recovery file u want to flash.
5. Now select the downloaded recovery.img and press open.
6. Now turn your mobile off and put out the battery
7. Now click download in spflash tools download tab to start flashing.
8. Now plug your data cable to your pc and your fone. It will start downloading.
9. When a green circle appers on your pc screen it means it finished flashing.
10. Now disconnect your data cable from pc and put your battery back to your fone.
11. Now press power button + volume up botton together untill qmobile logo appears and then release the power button but dont release volume up botton untill recovery starts on your fone.
Thats all.
Now do what u want
Credits to Carliv for his files.