My moto g (xt1032), after flash radio, i cant use the sim. - Moto G Q&A, Help & Troubleshooting

Hello, I have a big problem with my moto g. 3 months ago, my moto g got a short-circuit, and then, I wasnt able to use a usb or charge my moto g. I did a jumper in the circuit to charge the smartphone, but usb never works. But it was good, because I had TWRP and a custom rom. I was in CM13, but I wanted to try identity crisis 6 but 3G didnt work. In the FAQ, I saw that, if 3g didnt work, I should flash a radio for 5.1. I flashed 1032.3116.98.00R - Retail EU for my XT1032. Then, i cant use a sim because a text appeared where i have to write a code. The text is for unlocked the sim, but my moto g is unlocked. The text is: "SIM network unlock PIN" two options, unlock or dismiss.
I cant use fastboot for the jumper that I did. Do you have any idead to fix this problem?
Sorry for my english, I am spanish. I hope you understand everything and can help me.
I have changed the rom and the radio, but it doesnt work
Bye and Thank you very much.
EDIT: I fix it the problem, I flashed all radios till one radio fix my moto g.

Related

[Q] How to flash XT1033 baseband on CM11? + Flickering Problem

Hello,
I did many stupid things today:
1) Tried to encrypt my phone under CM11 and I lost everything
2) Installed GPE -> 5.0.1
3) So I lost my dual sim
4) Flashed again CM11.. still single sim
Seems that my baseband is MSM8626BP_1032.340.63.00R and I guess that the 1032 number means is the single sim version. Tried searching for answers but I couldn't find anything.
Appreciate any inputs to come back to have my second sim working.
Regards.
UPDATE: Tried flashing the Asian XT1033 Radio (http://forum.xda-developers.com/showthread.php?t=2649763) and still I have one sim . Also I have a flickering in the screen until I lock and unlock the phone.
This is the procedure I used to convert to GPE 5.0.1
http://forum.xda-developers.com/moto-g/general/guide-convert-brazilian-firmware-gpe-5-t2969472
Same Issue with you. dont know how to do it now.

[Q] Weird Issues on official Motorola 5.0.2 (brazilian)

Hello guys,
Well I have the most indescifrable issue with my Moto g (xt1032).
It was aquired with kitkat, the day 5.0.1 GPE was released I installed it, making it a xt1033 GPE.
When Motorola´s 5.0.2 was released (brazilian) I downgraded to 4.4.4, and went ahead and installed moto´s 5.0.2 for the camera..
The next day, all was going ok, wifi, gps, moblie data etc.. not a single issue.... I had made calls, sent sms, etc... but around 12:00m (lunchtime) I saw "emergency callls only".... (I have not cutted the sim card to fit in the phone).
At that time, I swapped sims, (I´m on Claro colombia, I put a Virgin Mobile Sim..) and it worked again. I could call, send messages and stuff.
But yesterday That Virgin mobile sim stopped working, Now I face the following notification: Selected network (Claro) Unavailable.
I also get another notification about Resticted mode changed.
and yet another notification that says my sim card cannot be used to register on said network.
And another notification that says cannot send mms without registering something.
And another notiication about Voice service disabled...
this is driving me crazy....
The first thing I thought was of factory resetting the phone, to no luck, as my phone gets stuck at the red exclamation android and never goes to recovery.
I tried to install Phillz recovery but I get fastboot errors.
My phone is rooted btw, bootloader unlocked.
Is this my fault? as in I did a massive screw-up, or is it the software or is it a change on the provider´s end? I dont know.
What would you recommend doing at this point?
I have entered test mode and selected GSM only, but no luck.
Please, please shine a light on me, searching for no service and specific notification content only guides me to kit kat issues, which I really don't know are applicable to lollipop.
Mercí for your attention guys, have a good night.
donlloreda said:
Hello guys,
Well I have the most indescifrable issue with my Moto g (xt1032).
It was aquired with kitkat, the day 5.0.1 GPE was released I installed it, making it a xt1033 GPE.
When Motorola´s 5.0.2 was released (brazilian) I downgraded to 4.4.4, and went ahead and installed moto´s 5.0.2 for the camera..
The next day, all was going ok, wifi, gps, moblie data etc.. not a single issue.... I had made calls, sent sms, etc... but around 12:00m (lunchtime) I saw "emergency callls only".... (I have not cutted the sim card to fit in the phone).
At that time, I swapped sims, (I´m on Claro colombia, I put a Virgin Mobile Sim..) and it worked again. I could call, send messages and stuff.
But yesterday That Virgin mobile sim stopped working, Now I face the following notification: Selected network (Claro) Unavailable.
I also get another notification about Resticted mode changed.
and yet another notification that says my sim card cannot be used to register on said network.
And another notification that says cannot send mms without registering something.
And another notiication about Voice service disabled...
this is driving me crazy....
The first thing I thought was of factory resetting the phone, to no luck, as my phone gets stuck at the red exclamation android and never goes to recovery.
I tried to install Phillz recovery but I get fastboot errors.
My phone is rooted btw, bootloader unlocked.
Is this my fault? as in I did a massive screw-up, or is it the software or is it a change on the provider´s end? I dont know.
What would you recommend doing at this point?
I have entered test mode and selected GSM only, but no luck.
Please, please shine a light on me, searching for no service and specific notification content only guides me to kit kat issues, which I really don't know are applicable to lollipop.
Mercí for your attention guys, have a good night.
Click to expand...
Click to collapse
Flash the full XT1033 BR firmware by downloading the following mirror:
https://drive.google.com/file/d/0B_2QjjWMyLghQm9vZ3hhS3Z3dUk/view ***Asia***
https://drive.google.com/file/d/0B_2QjjWMyLghV3hMYWVoSFo0WHc/view ***Brazil ***
I had the same issue (I'm also on Claro Colombia). All you need to do is flash the official Motorola Lollipop 5.0.2 and it'll be working fine.
Firmware 5.0.2 XT1032 http://www.filefactory.com/file/5i311qq8mguf/BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml.zip
Follow this guide: http://motoroot.890m.com/restore-stock/
Don't skip any step.
Thanks mate, will try and post results.
Anyway, just to know.. why does this happen?
Why is that the radio was working all right and suddenly went kaput?
Chefry22 said:
I had the same issue (I'm also on Claro Colombia). All you need to do is flash the official Motorola Lollipop 5.0.2 and it'll be working fine.
Firmware 5.0.2 XT1032 http://www.filefactory.com/file/5i311qq8mguf/BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml.zip
Follow this guide: http://motoroot.890m.com/restore-stock/
Don't skip any step.
Click to expand...
Click to collapse
Did as stated, but no luck. no network for me.
Gps, wifi and bluetooth are working fine though.
donlloreda said:
Did as stated, but no luck. no network for me.
Gps, wifi and bluetooth are working fine though.
Click to expand...
Click to collapse
Any Ideas? I´m in desperate need of using my phone, well you know.... as a phone

nightmare trying to get CM12 to boot on 4g XT1039 - no calls but data works on stock

Hello all
I recently got a Moto G 4G XT1039 in the UK which was on the o2 network, which I've unlocked.
I want to use my Three network simcard, which works fine on stock firmware, BUT the baseband is o2's one, so with my three sim card the data works, but calls doesn't "mobile data not available" so...
Can I flash a stock standard baseband?
I've tried unlocked bootloader and installed CM12 but it get stuck in bootloop at the cm animation, so i've restored to stock... I'm oblivious what to do next?!?
Any help would be appreciated...
I just want calls to work!
Thanks in advance.
Ok i've read I need to intall cm11 first to get it to boot as cm12 just stuck in boot animation but for the life of me cant find any cm11 download links, anyone know any?
Thanks
Hi, please help, moto g xt1039 works fine on 2g calling.. but when select 3g or lte,
it doesn't connect call, always call ended automatically.. any solution please..??
Did you ever update the phone to 5.1 stock ?, if so it should work fine. If however you went straight from KitKat to CM12, that's your problem, the radio firmware needs to be updated. Links to it are in the stock image threads on this board.

[Q] Moto G xt1032 with SIM slot not working on GSM networks

Hi guys. I recently got a Moto G and i knew sim card was not detected by network. Phone it detects it,even apn's. Problem is,it says on operators selection that my sim cant register on the network. My primary phone is a M7 in wich i use my sim just fine.
Also,it is possible to be a cdma phone,but why it has a sim slot and model number as international version? Anyway,in settings it says something about a baseband and not about radio version. Also my htc has baseband version not radio version and it works on gsm.
Anyway,is it possible to flash only modems(radios) on this phone w/o risking of bricking it? I wanna flash GB radios.
And i kinda dont know the whole process since i never had to do it on any of my phones. I would be very thankfull if someone can put me in the right direction with this. Thanks!
Edit : i forgot to mention. I am on cm 12.1 unlocked with latest bootloader.
You should flash stock ROM and try. Sometime CM ROM not work.

SIM doesn't work

Hello everyone.
I've a big problem with my motorola moto g 4g.
I've changed my phone and i bought a motorola moto x play (with nano-sim).
So, i decide to give my phone (motorola moto g 4g) to my brother, but his SIM doesn't work.
I've changed the SIM with portability of number but still doesn't work!
I tried to use and active SIM with another phone and with that device (LG L9) the sim work.
I tried to do an hard reset by recovery, i tried to do a reflash of lollipop rom that i used on my moto g lte with his radio module, i tried to reflash original kit kat ROM but still doesn't work.
SO, i think my RADIO module is broke. But if i use my SIM with a nano adapter to micro-sim in the motorola moto g, it work! I'm confused. My SIM work, my brother's sim no.
What can i do?

Categories

Resources