I was trying to convert my honor 6 back to stock. I'm not sure what version I had installed, just that it was EMUI 3.0. I tried using the Honor 6 tool unbrick method to reinstall the boot.img, cust.img, recovery.img and system.img from B316, however this has got my honor 6 stuck in a boot loop.
I've consequently tried using the unbrick method on loads of other versions of the 3.0 rom with no success.
Can anyone give me or point me to an idiots guide to unbricking? I am able to get in to fastboot, but that's it.
willmott1992 said:
I was trying to convert my honor 6 back to stock. I'm not sure what version I had installed, just that it was EMUI 3.0. I tried using the Honor 6 tool unbrick method to reinstall the boot.img, cust.img, recovery.img and system.img from B316, however this has got my honor 6 stuck in a boot loop.
I've consequently tried using the unbrick method on loads of other versions of the 3.0 rom with no success.
Can anyone give me or point me to an idiots guide to unbricking? I am able to get in to fastboot, but that's it.
Click to expand...
Click to collapse
After trying around 15 different roms, it turned out that I had B608 installed, so updating with that finally unbricked me
Related
Im not very experienced in Android Devolping , I only have some basic knowledge. I flashed b506 today in order to check out the new-beta rom. When i tried to rollback to b305 and then back to stable version b316 i faced some issues and the prosses kept failing. I tried to flash via Multi-Tool recovery for the stable version, and that is when i bricked my phone. At first I only had bootloops so I thought it was a good idea to unbrick the phone via multi-tool but i can't get in recovery mode in order to complete the procedure. At the moment im stuck at boot screen. I only can get in fastboot mode. Is there any way to get out from this situation or is my phone hard-bricked and there is nothing that can be done?
My version is H60-L02.
It's been a year since I've been using my honor 6(h60-04). Updated to lollipop. Found too heavy for my device. So tried to roll back to emui3.0
As there was no official rollback yet I've decided to unlock bootloader and install cynogen mod for a change.
Boot loader unlock success.
Installing cwm succes.
Detecting cynogen mod in SD card NO SUCCESS..!!
Installed TWRP success.
Detecting cynogen mod success..!!
Installation failed.!! Error message this mod is for h60-04 and 02. Not for your device ( even it was download from honor 6 xda forum)
Got irritated. Decided to roll back to stock.
First time flashed recovery. IMG and system.IMG via adb and tried to boot using 3 button reset.
Did not go to recovery and Stuck in HUAWEI logo loop...!!
Tried to unbrick using multi tool. Same...!!!
Even tried manual flash using adb. Cust, boot, recovery, system userdata.
No change. Stuck in loop..:crying:
Searched Google, xda and more and tried everything. No help.
Decided to give it for repair. Technician directly said mother board problem...!!
If mother board problem how it can enter custom recovery....???!!!
Please guys.. Need help here... Please....:angel:
Edit: solved
Hi guys,
I bricked my honor 6 and I don't know how fix it.
I was using developer ROM 6.2.1 not modded and not rooted
I decided to install stock rom B535 and I proceed as follow:
1 - I copyed stock rom in dload folder on my microsd card
2 - flash by fastboot stock recovery.img
3 - flash by fastboot system.img
after that i reboot the phone but it stay on Honor logo.
I tryed with 3 buttons method but the istallation start until 90% and then stop on 90%...
I tryed tho flash by fastboot also CUST, BOOT, USERDATA and CACHE (extracted by stock B535 ROM) but after 3 btn method the instalation stop again at 90%...
I don't know what I can do...
Any suggestion?
THANKS
My bootloader is unlocked
Is there any solution? I got the same problem.
The trouble I meet is similar to yours. I guess I will stay in EMUI3.1 forever
Sent from my XT1079 using XDA Free mobile app
I solved my problem, see my post: http://forum.xda-developers.com/hon...02-impossible-to-charge-t3329176#post65673722
Good Day every one
I really need your urgent help
I have a chinese Mate7 Gold dual SIM that I upgraded it till I reached MT7-TL10C00B357 using OTA
I have unlocked the bootloader and rooted the phone and installed TWRP 2.7.8.0 for lolipop
then I tried to install a middle east update.app by extract the file and make flashable Zip using huawei extractor
after this trial the Phone went to rescue Mode with no access to TWRP Recovery
I have tried the following with No Use
1-Install huawei suite 4 and trying system recovry ...it install the recovery and when installing the system it fails and after that the phone goes back to rescue mode with no access to rcovery
2- I extracted the Cust, Recovery, System, Boot and userdata from the Stock Rom MT7-TL10C00B357 and I flashed them using fast boot flash after putting the phone in fastboot rscue mode... the flash was OK but after the five files were flashed and trying to reboot, the phone goes back to rescue mode
3- trying the same as step 2 and trying to flash the update.app using three buttons flash... the phone stuck at Huawei Ascened Logo and nothing happens
4- trying another Update.app of Android 4.4 and extracting cust,recovery,boot, system and userdata and flash them using fast boot.. flash is ok but rescue mode is still presist
5- I have tried several times to flash TWRP again .. the flash is ok but no access to TWRP only Rescue mode or fastboot rescue mode
6- I tried to change to oeminfo and custom.bin to be eu using Huawei SRK tool 1.8 but I failed
when trying to adb devices the result is empty
I heared from one psot that this might be a problem in the sensor although I dont see a direct relation
so any one could figure out a solution to this problem
I guess I have all the tools necessary but cant find a working solution
Please help me urgently
Sherif Nassif said:
Good Day every one
I really need your urgent help
I have a chinese Mate7 Gold dual SIM that I upgraded it till I reached MT7-TL10C00B357 using OTA
I have unlocked the bootloader and rooted the phone and installed TWRP 2.7.8.0 for lolipop
then I tried to install a middle east update.app by extract the file and make flashable Zip using huawei extractor
after this trial the Phone went to rescue Mode with no access to TWRP Recovery
I have tried the following with No Use
1-Install huawei suite 4 and trying system recovry ...it install the recovery and when installing the system it fails and after that the phone goes back to rescue mode with no access to rcovery
2- I extracted the Cust, Recovery, System, Boot and userdata from the Stock Rom MT7-TL10C00B357 and I flashed them using fast boot flash after putting the phone in fastboot rscue mode... the flash was OK but after the five files were flashed and trying to reboot, the phone goes back to rescue mode
3- trying the same as step 2 and trying to flash the update.app using three buttons flash... the phone stuck at Huawei Ascened Logo and nothing happens
4- trying another Update.app of Android 4.4 and extracting cust,recovery,boot, system and userdata and flash them using fast boot.. flash is ok but rescue mode is still presist
5- I have tried several times to flash TWRP again .. the flash is ok but no access to TWRP only Rescue mode or fastboot rescue mode
6- I tried to change to oeminfo and custom.bin to be eu using Huawei SRK tool 1.8 but I failed
when trying to adb devices the result is empty
I heared from one psot that this might be a problem in the sensor although I dont see a direct relation
so any one could figure out a solution to this problem
I guess I have all the tools necessary but cant find a working solution
Please help me urgently
Click to expand...
Click to collapse
I had tried all the methods in the globe to flash the 4 files cust,recovery,system..etc and nothing happened
till I got this program from another thread the program called DC Pheonix
the advantage of this program is that you can flash all the image files of any update.app while if you try to flash for example sensorhub.img using fastboot , you will get a message that command not allowed
so install the program and buy a 15 Euoro credit and flash the original last ROM that was on the phone
I could not wait till the morning I downloaded Phoenix DC and bought 15 credits = 15 Euoros and flashed the original update.app which was the chinese version MT7-TL10C00B357
The phone is working well nowwwwwwwwwwwwwwww Yupeeeeeeeeeeeeeeeeeeeee
I am so Happy
Happened to me before, sounds wierd but actually , I thought it's a hard problrm to solve and that actually made me solve it after working for 8 hours and the solution simply was reboot in fastboot and rescue mode will be Rescue&fastboot mode , then flash
Sent from my JAZZ using Tapatalk
I have a Honor 6 Plus PE-TL10 running Android M. i bought the phone from Japan so probably the stock OS was Lollipop chinese or Japanese variant (not sure). Since there was no upgrade available to marshmallow in original OS I downloaded Indian upgrade file and locally upgraded my phone to Android M india. The phone was running smooth and fine for almost one year but wasnt rooted. So i flashed TWRP 3.0.2 successfully and then tried to flash SuperSU.zip meant for my phone but it failed and phone got stuck in bootloop. Then with no option left i tried to flash stock rom by extracting System, Boot, Recovery.zip from upgrade folder using huawei upgrade extractor and flashing through fastboot. The flash failed and now it just gets stuck on huawei logo right before the booting starts. So I think it aint even on bootloop. Its probably bricked. I cant enter into fastboot or recovery as its not taking any volume+Power key commands. I waited so that the battery drains out and i charged again but still nothing changed. The service center refused to fix it as it is not bought in India.
P.S i think the flash failed cause i tried to flash Indian Rom instead of original Chinese?Japanese?what-so-ever Rom.
Please help. What shall i do?
Thanks